blob: 77b2fe1793a225375d41a3b75a0be67552831bc0 [file] [log] [blame]
[ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0x100
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuset
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuacct
[ 0.000000] [0: swapper: 0] Linux version 4.4.13-12719828 (dpi@SWHE7718) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Dec 20 17:33:46 KST 2017
[ 0.000000] [0: swapper: 0] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] [0: swapper: 0] [ECT] Address 90000000, Size 19000
[ 0.000000] [0: swapper: 0] [MUIC] set_afc_mode: afc_mode is 0x00
[ 0.000000] [0: swapper: 0] charging_mode() : 0x0(0)
[ 0.000000] [0: swapper: 0] dsim: get_lcd_type: lcdtype: 810543
[ 0.000000] [0: swapper: 0] val = 49
[ 0.000000] [0: swapper: 0] Security Boot Mode
[ 0.000000] [0: swapper: 0] CMA memory[1]: crypto:0x1800000
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node crypto, compatible id exynos8890-ion,crypto
[ 0.000000] [0: swapper: 0] CMA memory[3]: video_stream:0x4800000
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node video_stream, compatible id exynos8890-ion,vstream
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node btabox_rmem, compatible id exynos,btabox_rmem
[ 0.000000] [0: swapper: 0] sec_debug_magic_setup: Reserved Mem(0x80000000, 0x1000) - Success
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node sec_debug_magic, compatible id exynos,sec_debug_magic
[ 0.000000] [0: swapper: 0] exynos_seclog_reserved_mem_setup: Reserved memory for seclog: addr=c0000000, size=80000
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node seclog_mem, compatible id exynos,seclog
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node wifibt_if, compatible id exynos,wifibt_if
[ 0.000000] [0: swapper: 0] abox_rmem_setup: base=0x00000000e9400000, size=0x0000000000400000
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node abox_rmem@0xE9400000, compatible id exynos,abox_rmem
[ 0.000000] [0: swapper: 0] modem_if_reserved_mem_setup: memory reserved: paddr=4114612224, t_size=142606336
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node modem_if, compatible id exynos,modem_if
[ 0.000000] [0: swapper: 0] modem_if_reserved_cplog_setup: cplog memory reserved: paddr=4257218560, t_size=33554432
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node cp_ram_logging, compatible id exynos,cp_ram_logging
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node gnss_if, compatible id exynos,gnss_if
[ 0.000000] [0: swapper: 0] cma: Reserved 20 MiB at 0x00000008fd000000
[ 0.000000] [0: swapper: 0] map_mem: UH is allocated extra memory
[ 0.000000] [0: swapper: 0] On node 0 totalpages: 1038848
[ 0.000000] [0: swapper: 0] Normal zone: 16232 pages used for memmap
[ 0.000000] [0: swapper: 0] Normal zone: 0 pages reserved
[ 0.000000] [0: swapper: 0] Normal zone: 1038848 pages, LIFO batch:31
[ 0.000000] [0: swapper: 0] psci: probing for conduit method from DT.
[ 0.000000] [0: swapper: 0] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] [0: swapper: 0] WARNING: x1-x3 nonzero in violation of boot protocol:
[ 0.000000] [0: swapper: 0] x1: 0000000080000000
[ 0.000000] [0: swapper: 0] x2: 00000000000f4000
[ 0.000000] [0: swapper: 0] x3: 00000000800f4000
[ 0.000000] [0: swapper: 0] This indicates a broken bootloader or old kernel
[ 0.000000] [0: swapper: 0] PERCPU: Embedded 15 pages/cpu @ffffffc87cea9000 s30464 r0 d30976 u61440
[ 0.000000] [0: swapper: 0] pcpu-alloc: s30464 r0 d30976 u61440 alloc=15*4096
[ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] [0: swapper: 0] Detected VIPT I-cache on CPU0
[ 0.000000] [0: swapper: 0] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022616
[ 0.000000] [0: swapper: 0] Kernel command line: console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 DynSysLog=1 androidboot.debug_level=0x4f4c androidboot.dram_info=01,06,01,4G androidboot.ap_serial=0x0774EF5052E4 sec_debug.chipidfail_cnt=0 sec_debug.lpitimeout_cnt=0 sec_debug.cache_err_cnt=0 sec_debug.codediff_cnt=0 sec_debug.pcb_offset=7343872 sec_debug.smd_offset=7344896 sec_debug.lpddr4_size=4 androidboot.smsn_offset=7345920 androidboot.recovery_offset=7347968 ess_setup=0x91200000 tima_log=0x200000@0xb8000000 sec_avc_log=0x40000@0x92602000 sec_summary_log=0x300000@0x92686000 sec_debug.base=0x100000@0x92988000 auto_summary_log=0x10000@0x92a8a000 charging_mode=0x0 s3cfb.bootloaderfb=0xec000000 lcdtype=8455491 androidboot.carrierid_offset=7340608 androidboot.carrierid=XSG consoleblank=0 vmalloc=384m sec_debug.reset_reason=7 sec_reset.reset_reason=7 ehci_hcd.park=3 oops=panic pmic_info=11 ccic_info=1 cordon=5d6062b282f63b22da2761427025255c connie=SM-A530F_OPEN_EUR_6d4cdeb98<6>[ 0.000000] [0: swapper: 0] sec_debug_recovery_cause_setup, recovery_cause_offset :701f00
[ 0.000000] [0: swapper: 0] exynos-snapshot: try to reserve dedicated memory : 0x91200000, 0x1400000
[ 0.000000] [0: swapper: 0] exynos-snapshot: memory reserved complete : 0x91200000, 0x1400000
[ 0.000000] [0: swapper: 0] sec_debug: GetLog support (mark:0xffffffc0014c78c8, klog: 0xffffffc011a00000)
[ 0.000000] [0: swapper: 0] tima :tima_log_setup, base:b8000000, size:200000
[ 0.000000] [0: swapper: 0] sec_avc_log_setup: *sec_avc_log_ptr:1584 sec_avc_log_buf:ffffffc012602000 sec_log_size:0x40000
[ 0.000000] [0: swapper: 0] sec_summary_log_setup, base:0x92686000 size:0x300000
[ 0.000000] [0: swapper: 0] sec_debug_init_base_buffer, base(virt):0xffffffc012988000 size:0x100000
[ 0.000000] [0: swapper: 0] sec_debug_base_setup, base(phys):0x92988000 size:0x100000
[ 0.000000] [0: swapper: 0] sec_auto_summary_log_setup, base:0x92a8a000 size:0x10000
[ 0.000000] [0: swapper: 0] [MUIC] set_switch_sel: switch_sel: 0x00b
[ 0.000000] [0: swapper: 0] [MUIC] set_ccic_info: ccic_info: 0x0001
[ 0.000000] [0: swapper: 0] sec_bat_get_fg_reset, fg_reset:0
[ 0.000000] [0: swapper: 0] kaslr :set_kaslr_region, base:80001000, size:1000
[ 0.000000] [0: swapper: 0] mif: console_setup: board_rev : 7
[ 0.000000] [0: swapper: 0] cplog_on=off, 0
[ 0.000000] [0: swapper: 0] fimc-is library memory: 0xffffff80fa000000
[ 0.000000] [0: swapper: 0] fimc-is heap memory: 0xffffff80fa000000
[ 0.000000] [0: swapper: 0] sec_bat_get_factory_mode, factory_mode : 0
[ 0.000000] [0: swapper: 0] uh_reserve_mem: base:0xb0500000, size:0x100000
[ 0.000000] [0: swapper: 0] uh_reserve_mem: base:0xb0600000, size:0x40000
[ 0.000000] [0: swapper: 0] uh_reserve_mem: base:0xb0640000, size:0x40000
[ 0.000000] [0: swapper: 0] uh_reserve_mem: base:0xafe00000, size:0x700000
[ 0.000000] [0: swapper: 0] uh_reserve_mem: base:0xb0808000, size:0x7f8000
[ 0.000000] [0: swapper: 0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] [0: swapper: 0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] [0: swapper: 0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] [0: swapper: 0] Sorting __ex_table...
[ 0.000000] [0: swapper: 0] Memory: 3630968K/4155392K available (9788K kernel code, 1470K rwdata, 4672K rodata, 4280K init, 7122K bss, 405640K reserved, 118784K cma-reserved)
[ 0.000000] [0: swapper: 0] Virtual kernel memory layout:
[ 0.000000] [0: swapper: 0] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] [0: swapper: 0] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] [0: swapper: 0] 0xffffffbdc0000000 - 0xffffffbde2000000 ( 544 MB actual)
[ 0.000000] [0: swapper: 0] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
[ 0.000000] [0: swapper: 0] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
[ 0.000000] [0: swapper: 0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] [0: swapper: 0] memory : 0xffffffc000000000 - 0xffffffc880000000 ( 34816 MB)
[ 0.000000] [0: swapper: 0] .init : 0xffffffc000f7b000 - 0xffffffc0013a9000 ( 4280 KB)
[ 0.000000] [0: swapper: 0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] [0: swapper: 0] uh_init: bin 0xffffffc000f7e3b0, 0x3c300
[ 0.000000] [0: swapper: 0] uh_init: BSS base = 0xffffffbf8003c110, 0x1348
[ 0.000000] [0: swapper: 0] uh_init: Head Text base = 0xffffffbf80001000, 0xc0
[ 0.000000] [0: swapper: 0] uh entry point: 00000000b0501000
[ 0.000000] [0: swapper: 0] uh add: 00000000b0500000, size: 0x100000, status: 0
[ 0.000000] [0: swapper/0: 0] Preemptible hierarchical RCU implementation.
[ 0.000000] [0: swapper/0: 0] Build-time adjustment of leaf fanout to 64.
[ 0.000000] [0: swapper/0: 0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] [0: swapper/0: 0] ========================================
[ 0.000000] [0: swapper/0: 0] =
[ 0.000000] [0: swapper/0: 0] = [ECT] current version is TEST VERSION!!
[ 0.000000] [0: swapper/0: 0] = Please be aware that error can be happen.
[ 0.000000] [0: swapper/0: 0] = [VERSION] : 002g
[ 0.000000] [0: swapper/0: 0] =
[ 0.000000] [0: swapper/0: 0] ========================================
[ 0.000000] [0: swapper/0: 0] vclk initialize for cmucal
[ 0.000000] [0: swapper/0: 0] asv_table_version : 2
[ 0.000000] [0: swapper/0: 0] big grp : 5
[ 0.000000] [0: swapper/0: 0] little grp : 5
[ 0.000000] [0: swapper/0: 0] g3d grp : 5
[ 0.000000] [0: swapper/0: 0] mif grp : 5
[ 0.000000] [0: swapper/0: 0] int grp : 5
[ 0.000000] [0: swapper/0: 0] fsys grp : 5
[ 0.000000] [0: swapper/0: 0] cp grp : 7
[ 0.000000] [0: swapper/0: 0] PMUCAL: pmucal_cp_initialize()
[ 0.000000] [0: swapper/0: 0] EXYNOS7885: Clock setup completed
[ 0.000000] [0: swapper/0: 0] Exynos: pwm: clock setup completed
[ 0.000000] [0: swapper/0: 0] arch_timer_of_init: arch_timer is used only clocksource
[ 0.000000] [0: swapper/0: 0] Architected cp15 timer(s) running at 26.00MHz (virt).
[ 0.000000] [0: swapper/0: 0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5ff13d5a9, max_idle_ns: 440795202370 ns
[ 0.000004] [0: swapper/0: 0] sched_clock: 56 bits at 26MHz, resolution 38ns, wraps every 4398046511088ns
[ 0.002701] [0: swapper/0: 0] set_state_shutdown: mct_tick_stop (cpu0)
[ 0.003718] [0: swapper/0: 0] Enable clock for console to add reference counter
[ 0.003761] [0: swapper/0: 0] Calibrating delay loop (skipped), value calculated using timer frequency.. 52.00 BogoMIPS (lpj=104000)
[ 0.003775] [0: swapper/0: 0] pid_max: default: 32768 minimum: 301
[ 0.003848] [0: swapper/0: 0] Security Framework initialized
[ 0.003862] [0: swapper/0: 0] SELinux: Initializing.
[ 0.003908] [0: swapper/0: 0] SELinux: Starting in permissive mode
[ 0.003949] [0: swapper/0: 0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.003968] [0: swapper/0: 0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004691] [0: swapper/0: 0] Initializing cgroup subsys freezer
[ 0.004712] [0: swapper/0: 0] Initializing cgroup subsys debug
[ 0.006208] [0: swapper/0: 1] /cpus/cpu@100: Missing clock-frequency property
[ 0.006251] [0: swapper/0: 1] /cpus/cpu@101: Missing clock-frequency property
[ 0.006289] [0: swapper/0: 1] /cpus/cpu@102: Missing clock-frequency property
[ 0.006334] [0: swapper/0: 1] /cpus/cpu@103: Missing clock-frequency property
[ 0.006376] [0: swapper/0: 1] /cpus/cpu@200: Missing clock-frequency property
[ 0.006418] [0: swapper/0: 1] /cpus/cpu@201: Missing clock-frequency property
[ 0.006462] [0: swapper/0: 1] /cpus/cpu@0: Missing clock-frequency property
[ 0.006508] [0: swapper/0: 1] /cpus/cpu@1: Missing clock-frequency property
[ 0.006570] [0: swapper/0: 1] ASID allocator initialised with 65536 entries
[ 0.025415] [0: swapper/0: 1] exynos-snapshot physical / virtual memory layout:
[ 0.025435] [0: swapper/0: 1] log_kevents : phys:0x91200000 / virt:0xffffff80f6000000 / size:0x800000
[ 0.025447] [0: swapper/0: 1] log_kernel : phys:0x91a00000 / virt:0xffffff80f6800000 / size:0x200000
[ 0.025458] [0: swapper/0: 1] log_platform: phys:0x91c00000 / virt:0xffffff80f6a00000 / size:0x400000
[ 0.025470] [0: swapper/0: 1] log_sfr : phys:0x92000000 / virt:0xffffff80f6e00000 / size:0x400000
[ 0.025480] [0: swapper/0: 1] log_pstore : phys:0x92400000 / virt:0xffffff80f7200000 / size:0x200000
[ 0.025495] [0: swapper/0: 1] sec_debug_save_last_kmsg: sec_log buffer is full
[ 0.042695] [0: swapper/0: 1] sec_debug_save_last_kmsg: successed
[ 0.043015] [0: swapper/0: 1] success to regsiter sfr-dump-cmu-peris
[ 0.043035] [0: swapper/0: 1] success to regsiter sfr-dump-cmu-dispaud
[ 0.043051] [0: swapper/0: 1] exynos-snapshot: enabled
[ 0.043939] [0: swapper/0: 1] exynos-snapshot: logger buffer alloc address: 0xffffff800000a000
[ 0.044153] [0: swapper/0: 1] sec_debug: set magic code (0x66262564)
[ 0.058898] [1: swapper/1: 0] Detected VIPT I-cache on CPU1
[ 0.058952] [1: swapper/1: 0] set_state_shutdown: mct_tick_stop (cpu1)
[ 0.058977] [1: swapper/1: 0] CPU1: Booted secondary processor [410fd034]
[ 0.070881] [2: swapper/2: 0] Detected VIPT I-cache on CPU2
[ 0.070924] [2: swapper/2: 0] set_state_shutdown: mct_tick_stop (cpu2)
[ 0.070948] [2: swapper/2: 0] CPU2: Booted secondary processor [410fd034]
[ 0.082884] [3: swapper/3: 0] Detected VIPT I-cache on CPU3
[ 0.082931] [3: swapper/3: 0] set_state_shutdown: mct_tick_stop (cpu3)
[ 0.082952] [3: swapper/3: 0] CPU3: Booted secondary processor [410fd034]
[ 0.094957] [4: swapper/4: 0] Detected VIPT I-cache on CPU4
[ 0.095333] [4: swapper/4: 0] set_state_shutdown: mct_tick_stop (cpu4)
[ 0.095360] [4: swapper/4: 0] CPU4: Booted secondary processor [410fd034]
[ 0.106872] [5: swapper/5: 0] Detected VIPT I-cache on CPU5
[ 0.106914] [5: swapper/5: 0] set_state_shutdown: mct_tick_stop (cpu5)
[ 0.106937] [5: swapper/5: 0] CPU5: Booted secondary processor [410fd034]
[ 0.118941] [6: swapper/6: 0] Detected VIPT I-cache on CPU6
[ 0.119132] [6: swapper/6: 0] set_state_shutdown: mct_tick_stop (cpu6)
[ 0.119149] [6: swapper/6: 0] CPU6: Booted secondary processor [410fd092]
[ 0.119755] [7: swapper/7: 0] Detected VIPT I-cache on CPU7
[ 0.119782] [7: swapper/7: 0] set_state_shutdown: mct_tick_stop (cpu7)
[ 0.119797] [7: swapper/7: 0] CPU7: Booted secondary processor [410fd092]
[ 0.119887] [0: swapper/0: 1] Brought up 8 CPUs
[ 0.120020] [0: swapper/0: 1] SMP: Total of 8 processors activated.
[ 0.120044] [0: swapper/0: 1] CPU: All CPU(s) started at EL1
[ 0.120099] [0: migration/0: 10] alternatives: patching kernel code
[ 0.120951] [0: swapper/0: 1] devtmpfs: initialized
[ 0.142330] [7: swapper/0: 1] hmp_boostpulse_endtime is set(40136000)
[ 0.143619] [7: swapper/0: 1] sched: registering cpufreq notifiers for scale-invariant loads
[ 0.143729] [7: swapper/0: 1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.145325] [7: swapper/0: 1] pinctrl core: initialized pinctrl subsystem
[ 0.157819] [7: swapper/0: 1] exynos_protect_kernel_text: Kernel text start VA(0xffffffc0000f4000), PA(0x800f4000)
[ 0.157835] [7: swapper/0: 1] exynos_protect_kernel_text: Kernel text end VA(0xffffffc000f14000), PA(0x80f14000)
[ 0.157868] [7: swapper/0: 1] exynos_protect_kernel_text: Success to set Kernel code as read-only
[ 0.158469] [7: swapper/0: 1] sec_debug: GetLog support (ver:0xffffffc0014c7858)
[ 0.158727] [7: swapper/0: 1] NET: Registered protocol family 16
[ 0.171852] [7: swapper/0: 1] cpuidle: using governor ladder
[ 0.183817] [7: swapper/0: 1] cpuidle: using governor menu
[ 0.183834] [7: swapper/0: 1] [FD_DETECT] sec_fd_detect_init
[ 0.185037] [7: swapper/0: 1] vdso: 2 pages (1 code @ ffffffc0013c5000, 1 data @ ffffffc0013c4000)
[ 0.185066] [7: swapper/0: 1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.186053] [7: swapper/0: 1] DMA: preallocated 2048 KiB pool for atomic allocations
[ 0.186547] [7: swapper/0: 1] exynos_set_seh_address: send smc call with SMC_CMD_SET_SEH_ADDRESS.
[ 0.186575] [7: swapper/0: 1] exynos_set_seh_address: did not set the seh address to el3 monitor. ret = 0xffffffff.
[ 0.186597] [7: swapper/0: 1] exynos_set_debug_mem: alloc kmem for smc_dbg virt: 0xffffffc874f56000 phys: 0x00000008f4f56000 size: 4096.
[ 0.186611] [7: swapper/0: 1] exynos_set_debug_mem: Can not set the address to el3 monitor. ret = 0xffffffff. free the kmem
[ 0.186863] [7: swapper/0: 1] boot_lock_time property is omitted!
[ 0.186986] [7: swapper/0: 1] IOVMM: Created debugfs entry at debugfs/iovmm
[ 0.187001] [7: swapper/0: 1] IOMMU: Created debugfs entry at debugfs/iommu
[ 0.187136] [7: swapper/0: 1] BTS: driver is initialized
[ 0.187570] [7: swapper/0: 1] DMA ranges for domain iommu-domain_disp. [0x10000000..0xffff0000]
[ 0.187670] [7: swapper/0: 1] Added client.1[dpp] into domain iommu-domain_disp
[ 0.187700] [7: swapper/0: 1] Added client.2[dpp] into domain iommu-domain_disp
[ 0.187724] [7: swapper/0: 1] Added client.3[dpp] into domain iommu-domain_disp
[ 0.187748] [7: swapper/0: 1] Added client.4[dpp] into domain iommu-domain_disp
[ 0.187768] [7: swapper/0: 1] DMA ranges for domain iommu-domain_aud. [0x10000000..0xd0000000]
[ 0.187877] [7: swapper/0: 1] Added client.1[abox] into domain iommu-domain_aud
[ 0.187905] [7: swapper/0: 1] DMA ranges for domain iommu-domain_is. [0x10000000..0xd0000000]
[ 0.187991] [7: swapper/0: 1] Added client.1[fimc_is] into domain iommu-domain_is
[ 0.188025] [7: swapper/0: 1] Added client.2[fimc_is_sensor] into domain iommu-domain_is
[ 0.188053] [7: swapper/0: 1] Added client.3[fimc_is_sensor] into domain iommu-domain_is
[ 0.188081] [7: swapper/0: 1] Added client.4[fimc_is_sensor] into domain iommu-domain_is
[ 0.188109] [7: swapper/0: 1] Added client.5[fimc_is_sensor] into domain iommu-domain_is
[ 0.188137] [7: swapper/0: 1] Added client.6[gdc] into domain iommu-domain_is
[ 0.188152] [7: swapper/0: 1] DMA ranges for domain iommu-domain_mfcmscl. [0x10000000..0x80000000]
[ 0.188212] [7: swapper/0: 1] Added client.1[smfc] into domain iommu-domain_mfcmscl
[ 0.188239] [7: swapper/0: 1] Added client.2[scaler] into domain iommu-domain_mfcmscl
[ 0.188263] [7: swapper/0: 1] Added client.3[fimg2d] into domain iommu-domain_mfcmscl
[ 0.188286] [7: swapper/0: 1] Added client.4[mfc0] into domain iommu-domain_mfcmscl
[ 0.188791] [7: swapper/0: 1] exynos-sysmmu 148c0000.sysmmu: Registering secure irq 15
[ 0.188852] [7: swapper/0: 1] exynos-sysmmu 148c0000.sysmmu: Secure base = 0x148d0000
[ 0.188879] [7: swapper/0: 1] exynos-sysmmu 148c0000.sysmmu: is probed. Version 7.2.0
[ 0.189125] [7: swapper/0: 1] exynos-sysmmu 14a30000.sysmmu_abox: is probed. Version 7.2.0
[ 0.189398] [7: swapper/0: 1] exynos-sysmmu 14540000.sysmmu: Registering secure irq 18
[ 0.189434] [7: swapper/0: 1] exynos-sysmmu 14540000.sysmmu: Secure base = 0x14530000
[ 0.189473] [7: swapper/0: 1] exynos-sysmmu 14540000.sysmmu: is probed. Version 7.2.0
[ 0.189732] [7: swapper/0: 1] exynos-sysmmu 14730000.sysmmu: Registering secure irq 20
[ 0.189764] [7: swapper/0: 1] exynos-sysmmu 14730000.sysmmu: Secure base = 0x14740000
[ 0.189785] [7: swapper/0: 1] exynos-sysmmu 14730000.sysmmu: is probed. Version 7.2.0
[ 0.190038] [7: swapper/0: 1] exynos-sysmmu 14760000.sysmmu: Registering secure irq 22
[ 0.190072] [7: swapper/0: 1] exynos-sysmmu 14760000.sysmmu: Secure base = 0x14770000
[ 0.190093] [7: swapper/0: 1] exynos-sysmmu 14760000.sysmmu: is probed. Version 7.2.0
[ 0.190350] [7: swapper/0: 1] exynos-sysmmu 12c50000.sysmmu: Registering secure irq 24
[ 0.190382] [7: swapper/0: 1] exynos-sysmmu 12c50000.sysmmu: Secure base = 0x12c60000
[ 0.190409] [7: swapper/0: 1] exynos-sysmmu 12c50000.sysmmu: is probed. Version 7.2.0
[ 0.195467] [7: swapper/0: 1] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS7885] CPU_REV[0x1] Detected
[ 0.198499] [7: swapper/0: 1] usi 10032000.usi: usi_probe() mode:4
[ 0.198615] [7: swapper/0: 1] usi 10032004.usi: usi_probe() mode:4
[ 0.198722] [7: swapper/0: 1] usi 10032008.usi: usi_probe() mode:4
[ 0.201491] [7: swapper/0: 1] platform 14851000.dpp: is owner of 148c0000.sysmmu
[ 0.201676] [7: swapper/0: 1] platform 14852000.dpp: is owner of 148c0000.sysmmu
[ 0.201851] [7: swapper/0: 1] platform 14853000.dpp: is owner of 148c0000.sysmmu
[ 0.202041] [7: swapper/0: 1] platform 14854000.dpp: is owner of 148c0000.sysmmu
[ 0.202970] [7: swapper/0: 1] platform 14a50000.abox: is owner of 14a30000.sysmmu_abox
[ 0.203488] [7: swapper/0: 1] platform 12c00000.smfc: is owner of 12c50000.sysmmu
[ 0.203670] [7: swapper/0: 1] platform 12c10000.scaler: is owner of 12c50000.sysmmu
[ 0.203872] [7: swapper/0: 1] platform 12c20000.fimg2d: is owner of 12c50000.sysmmu
[ 0.204309] [7: swapper/0: 1] platform 12c30000.mfc0: is owner of 12c50000.sysmmu
[ 0.204554] [7: swapper/0: 1] exynos-acpm-ipc 11c40000.acpm_ipc: acpm_ipc probe
[ 0.204717] [7: swapper/0: 1] [ACPM] acpm framework SRAM dump to dram base: 0x8f4a60000
[ 0.207295] [7: swapper/0: 1] platform 14440000.fimc_is: is owner of 14730000.sysmmu
[ 0.207347] [7: swapper/0: 1] platform 14440000.fimc_is: is owner of 14760000.sysmmu
[ 0.207403] [7: swapper/0: 1] platform 14440000.fimc_is: is owner of 14540000.sysmmu
[ 0.207922] [7: swapper/0: 1] platform 14410000.fimc_is_sensor: is owner of 14540000.sysmmu
[ 0.208116] [7: swapper/0: 1] platform 14400000.fimc_is_sensor: is owner of 14540000.sysmmu
[ 0.208295] [7: swapper/0: 1] platform 14420000.fimc_is_sensor: is owner of 14540000.sysmmu
[ 0.208468] [7: swapper/0: 1] platform 14430000.fimc_is_sensor: is owner of 14540000.sysmmu
[ 0.208642] [7: swapper/0: 1] platform 14630000.gdc: is owner of 14730000.sysmmu
[ 0.211123] [7: swapper/0: 1] exynos-acpm 11c88000.acpm: acpm probe
[ 0.248750] [7: swapper/0: 1] EXYNOS-PD: exynos_pd_dt_parse: pd-dispaud read need_smc 0x148f0000 successfully.!
[ 0.249364] [7: swapper/0: 1] EXYNOS-PD: pd-isp has a new child pd-cam.
[ 0.249584] [7: swapper/0: 1] EXYNOS-PD: PM Domain Initialize
[ 0.249695] [7: swapper/0: 1] pd-dispaud - on
[ 0.249713] [7: swapper/0: 1] pd-mfcmscl - on
[ 0.249730] [7: swapper/0: 1] pd-isp - on
[ 0.249746] [7: swapper/0: 1] pd-cam - on
[ 0.249763] [7: swapper/0: 1] pd-g3d - on
[ 0.250160] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM
[ 0.250179] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM
[ 0.250201] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM
[ 0.250215] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM
[ 0.250230] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM
[ 0.250242] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM
[ 0.250257] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM
[ 0.250271] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM
[ 0.250283] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 0(dm_cpu_cl0), dvfs_type: 0, available = true
[ 0.250295] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 1(dm_cpu_cl1), dvfs_type: 0, available = true
[ 0.250307] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 2(dm_mif), dvfs_type: 1, available = true
[ 0.250317] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 3(dm_int), dvfs_type: 1, available = true
[ 0.250327] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 5(dm_disp), dvfs_type: 1, available = true
[ 0.250336] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 6(dm_fsys), dvfs_type: 1, available = true
[ 0.250345] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 7(dm_aud), dvfs_type: 1, available = true
[ 0.250353] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 8(dm_cam), dvfs_type: 1, available = true
[ 0.250953] [7: swapper/0: 1] s2mpu08:s2mpu08_i2c_init
[ 0.251174] [7: swapper/0: 1] SCSI subsystem initialized
[ 0.251371] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[ 0.251383] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: number of chip select lines not specified, assuming 1 chip select line
[ 0.251643] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: Not define default state.
[ 0.251655] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: Not use idle state.
[ 0.251668] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.251679] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: PORT 0 fifo_lvl_mask = 0x1ff
[ 0.252168] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[ 0.252185] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: number of chip select lines not specified, assuming 1 chip select line
[ 0.252392] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: Not define default state.
[ 0.252403] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: Not use idle state.
[ 0.252416] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.252431] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: PORT 1 fifo_lvl_mask = 0x1ff
[ 0.252966] [7: swapper/0: 1] s3c64xx-spi 13920000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[ 0.253063] [7: swapper/0: 1] exynos_get_idle_ip_index: Fail to find 13920000.spi in idle-ip list with err -61
[ 0.253142] [7: swapper/0: 1] s3c64xx-spi 13920000.spi: Not use idle state.
[ 0.253154] [7: swapper/0: 1] s3c64xx-spi 13920000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.253168] [7: swapper/0: 1] s3c64xx-spi 13920000.spi: PORT 2 fifo_lvl_mask = 0x7f
[ 0.253759] [7: swapper/0: 1] s3c64xx-spi 13980000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[ 0.253854] [7: swapper/0: 1] exynos_get_idle_ip_index: Fail to find 13980000.spi in idle-ip list with err -61
[ 0.253931] [7: swapper/0: 1] s3c64xx-spi 13980000.spi: Not use idle state.
[ 0.253944] [7: swapper/0: 1] s3c64xx-spi 13980000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.253958] [7: swapper/0: 1] s3c64xx-spi 13980000.spi: PORT 4 fifo_lvl_mask = 0x7f
[ 0.254781] [7: swapper/0: 1] usbcore: registered new interface driver usbfs
[ 0.254817] [7: swapper/0: 1] usbcore: registered new interface driver hub
[ 0.254901] [7: swapper/0: 1] usbcore: registered new device driver usb
[ 0.255004] [7: swapper/0: 1] [Input Booster] input_booster_init
[ 0.255300] [7: swapper/0: 1] [Input Booster] input_booster_init ndevice_in_dt : 10
[ 0.255317] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : KEY
[ 0.255326] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 1
[ 0.255342] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,0,0,0] hmp_boost[1] times[500,500,0]
[ 0.255350] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : TOUCHKEY
[ 0.255359] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 1
[ 0.255373] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,0,0,0] hmp_boost[1] times[0,200,0]
[ 0.255381] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : TOUCH
[ 0.255389] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 3
[ 0.255403] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0]
[ 0.255416] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0]
[ 0.255429] [7: swapper/0: 1] [Input Booster] Level 2 : frequency[936000,839000,0,0] hmp_boost[1] times[0,500,0]
[ 0.255437] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MULTITOUCH
[ 0.255446] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
[ 0.255459] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[1000,0,0]
[ 0.255472] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[936000,839000,0,0] hmp_boost[1] times[0,500,0]
[ 0.255481] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : KEYBOARD
[ 0.255491] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
[ 0.255506] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0]
[ 0.255521] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[936000,839000,0,0] hmp_boost[1] times[130,0,0]
[ 0.255531] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MOUSE
[ 0.255539] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
[ 0.255553] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0]
[ 0.255567] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[936000,839000,0,0] hmp_boost[1] times[0,500,0]
[ 0.255575] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MOUSE WHEEL
[ 0.255583] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
[ 0.255599] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0]
[ 0.255613] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[0,0,0,0] hmp_boost[0] times[0,0,0]
[ 0.255621] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : PEN HOVER
[ 0.255631] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
[ 0.255647] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0]
[ 0.255661] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[936000,839000,0,0] hmp_boost[1] times[0,500,0]
[ 0.255669] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : PEN
[ 0.255676] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
[ 0.255690] [7: swapper/0: 1] Failed to get [0] param table property
[ 0.255701] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1560000,839000,0,0] hmp_boost[1] times[200,0,0]
[ 0.255713] [7: swapper/0: 1] Failed to get [1] param table property
[ 0.255721] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[936000,839000,0,0] hmp_boost[1] times[0,600,600]
[ 0.255729] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : KEY_TWO
[ 0.255738] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 1
[ 0.255754] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1872000,0,0,0] hmp_boost[1] times[700,700,0]
[ 0.256483] [7: swapper/0: 1] exynos5-hsi2c 138a0000.hsi2c: SDA trigger timing not needed.
[ 0.256739] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C
[ 0.256751] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C
[ 0.256762] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98
[ 0.256771] [7: swapper/0: 1] tDATA_HD: 26
[ 0.256779] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00
[ 0.256798] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C
[ 0.256806] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C
[ 0.256814] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98
[ 0.256821] [7: swapper/0: 1] tDATA_HD: 26
[ 0.256828] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00
[ 0.257092] [7: swapper/0: 1] exynos5-hsi2c 138b0000.hsi2c: SDA trigger timing not needed.
[ 0.257306] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C
[ 0.257319] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C
[ 0.257330] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98
[ 0.257339] [7: swapper/0: 1] tDATA_HD: 26
[ 0.257348] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00
[ 0.257367] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C
[ 0.257375] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C
[ 0.257383] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98
[ 0.257390] [7: swapper/0: 1] tDATA_HD: 26
[ 0.257396] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00
[ 0.257639] [7: swapper/0: 1] exynos5-hsi2c 138c0000.hsi2c: SDA trigger timing not needed.
[ 0.257840] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C
[ 0.257852] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C
[ 0.257862] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98
[ 0.257871] [7: swapper/0: 1] tDATA_HD: 26
[ 0.257880] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00
[ 0.257898] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C
[ 0.257906] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C
[ 0.257913] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98
[ 0.257921] [7: swapper/0: 1] tDATA_HD: 26
[ 0.257927] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00
[ 0.258449] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C
[ 0.258463] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C
[ 0.258475] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98
[ 0.258484] [7: swapper/0: 1] tDATA_HD: 26
[ 0.258493] [7: swapper/0: 1] i2c_timing_s1:4C4C4C36
[ 0.258514] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C
[ 0.258522] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C
[ 0.258529] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98
[ 0.258536] [7: swapper/0: 1] tDATA_HD: 26
[ 0.258543] [7: swapper/0: 1] i2c_timing_s1:4C4C4C36
[ 0.258979] [7: swapper/0: 1] exynos-speedy 11ce0000.speedy: speedy driver probe started
[ 0.259065] [7: swapper/0: 1] exynos-speedy 11ce0000.speedy: speedy swreset directly was done
[ 0.259106] [7: swapper/0: 1] exynos-speedy 11ce0000.speedy: batcher s/w reset was done
[ 0.259377] [7: swapper/0: 1] s2mpu08:s2mpu08_i2c_probe
[ 0.259418] [7: swapper/0: 1] [DEBUG] of_s2mpu08_dt: codec node exist, name: cod3035x
[ 0.259427] [7: swapper/0: 1] of_s2mpu08_dt: irq-gpio: 22
[ 0.259834] [7: swapper/0: 1] s2mpu08 4-0000: use_i2c_speedy was true
[ 0.259857] [7: swapper/0: 1] s2mpu08:s2mpu08_irq_init irq=155, irq->gpio=22
[ 0.265827] [7: swapper/0: 1] s2mpu08:s2mpu08_irq_init s2mpu08_PMIC_REG_INTSRC_MASK=0x20
[ 0.266008] [7: swapper/0: 1] s2mpu08_pmic_probe s2mpu08 pmic driver Loading start
[ 0.364501] [7: swapper/0: 1] s2mpu08_pmic_probe s2mpu08 pmic driver Loading end
[ 0.364628] [7: swapper/0: 1] exynos-speedy 11ce0000.speedy: speedy driver probe was succeeded
[ 0.365695] [7: swapper/0: 1] s3c-i2c 13830000.i2c: i2c-5: S3C I2C adapter
[ 0.366122] [7: swapper/0: 1] s3c-i2c 13840000.i2c: i2c-6: S3C I2C adapter
[ 0.366270] [7: swapper/0: 1] exynos_get_idle_ip_index: Fail to find 13850000.i2c in idle-ip list with err -61
[ 0.366521] [7: swapper/0: 1] s3c-i2c 13850000.i2c: i2c-7: S3C I2C adapter
[ 0.366916] [7: swapper/0: 1] s3c-i2c 13860000.i2c: i2c-8: S3C I2C adapter
[ 0.367315] [7: swapper/0: 1] s3c-i2c 13870000.i2c: i2c-9: S3C I2C adapter
[ 0.367521] [7: swapper/0: 1] exynos_get_idle_ip_index: Fail to find 13880000.i2c in idle-ip list with err -61
[ 0.367777] [7: swapper/0: 1] s3c-i2c 13880000.i2c: i2c-10: S3C I2C adapter
[ 0.368051] [7: swapper/0: 1] media: Linux media interface: v0.10
[ 0.368094] [7: swapper/0: 1] Linux video capture interface: v2.00
[ 0.368337] [7: swapper/0: 1] exynos_smu_probe: Exynos SMU driver is proved
[ 0.368876] [7: swapper/0: 1] ion_hpa_heap_create: HPA heap vfw_heap(2) is created
[ 0.368899] [7: swapper/0: 1] ion_hpa_heap_create: HPA heap vnfw_heap(7) is created
[ 0.368912] [7: swapper/0: 1] ion_hpa_heap_create: HPA heap vframe_heap(5) is created
[ 0.368931] [7: swapper/0: 1] ion_hpa_heap_create: HPA heap vscaler_heap(6) is created
[ 0.368950] [7: swapper/0: 1] ion_hpa_heap_create: HPA heap gpu_heap(9) is created
[ 0.369226] [7: swapper/0: 1] argos_probe: Start probe
[ 0.369290] [7: swapper/0: 1] argos_probe: parse dt done
[ 0.369624] [6: swapper/0: 1] s2mu004_pdic_notifier_init
[ 0.369643] [6: swapper/0: 1] [SENSORS CORE] sensors_class_init
[ 0.369750] [6: swapper/0: 1] [SENSORS CORE] sensors_class_init succcess
[ 0.369768] [6: swapper/0: 1] fingerprint_class_init
[ 0.369827] [6: swapper/0: 1] Advanced Linux Sound Architecture Driver Initialized.
[ 0.370349] [6: swapper/0: 1] regulatory is not upadted via queue_regulatory_request.
[ 0.371587] [7: swapper/0: 1] clocksource: Switched to clocksource arch_sys_counter
[ 0.371806] I[7: swapper/0: 1] set_state_shutdown: mct_tick_stop (cpu7)
[ 0.374742] I[0: swapper/0: 0] set_state_shutdown: mct_tick_stop (cpu0)
[ 0.374951] I[5: swapper/5: 0] set_state_shutdown: mct_tick_stop (cpu5)
[ 0.374963] I[2: swapper/2: 0] set_state_shutdown: mct_tick_stop (cpu2)
[ 0.374974] I[3: swapper/3: 0] set_state_shutdown: mct_tick_stop (cpu3)
[ 0.374985] I[1: swapper/1: 0] set_state_shutdown: mct_tick_stop (cpu1)
[ 0.375158] I[6: swapper/6: 0] set_state_shutdown: mct_tick_stop (cpu6)
[ 0.375365] I[4: swapper/4: 0] set_state_shutdown: mct_tick_stop (cpu4)
[ 0.400874] [7: swapper/0: 1] __init_sec_tsp_raw_data: vaddr=0xffffffc8742a0000 size=0xc800
[ 0.400890] [7: swapper/0: 1] __init_sec_tsp_raw_data: init done
[ 0.401002] [7: swapper/0: 1] NET: Registered protocol family 2
[ 0.401448] [7: swapper/0: 1] default registered
[ 0.401461] [7: swapper/0: 1] default registered
[ 0.401472] [7: swapper/0: 1] MPTCP: Stable release v0.89.0-rc
[ 0.401528] [7: swapper/0: 1] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.401679] [7: swapper/0: 1] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.401862] [7: swapper/0: 1] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.401914] [7: swapper/0: 1] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.401954] [7: swapper/0: 1] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.402149] [7: swapper/0: 1] NET: Registered protocol family 1
[ 0.402212] [7: swapper/0: 1] exynos-acpm 11c88000.acpm: Loading exynos7885_acpm_fvp.fw firmware ...
[ 0.402285] [7: swapper/0: 1] exynos-acpm 11c88000.acpm: OK
[ 0.402353] [7: swapper/0: 1] [ACPM] plugin(id = 3) attach done!
[ 0.402371] [7: swapper/0: 1] fvmap_init:fvmap initialize ffffff80007d1400
[ 0.402384] [7: swapper/0: 1] dvfs_type : dvfs_mif - id : 0
[ 0.402393] [7: swapper/0: 1] num_of_lv : 10
[ 0.402405] [7: swapper/0: 1] num_of_members : 7
[ 0.402418] [7: swapper/0: 1] lv : [2093000], volt = 868750 uV (0 %)
[ 0.402430] [7: swapper/0: 1] lv : [2002000], volt = 868750 uV (0 %)
[ 0.402439] [7: swapper/0: 1] lv : [1794000], volt = 743750 uV (0 %)
[ 0.402448] [7: swapper/0: 1] lv : [1539000], volt = 743750 uV (0 %)
[ 0.402457] [7: swapper/0: 1] lv : [1352000], volt = 656250 uV (0 %)
[ 0.402465] [7: swapper/0: 1] lv : [1014000], volt = 656250 uV (0 %)
[ 0.402474] [7: swapper/0: 1] lv : [ 845000], volt = 656250 uV (0 %)
[ 0.402482] [7: swapper/0: 1] lv : [ 676000], volt = 631250 uV (0 %)
[ 0.402491] [7: swapper/0: 1] lv : [ 546000], volt = 631250 uV (0 %)
[ 0.402499] [7: swapper/0: 1] lv : [ 420000], volt = 631250 uV (0 %)
[ 0.402509] [7: swapper/0: 1] dvfs_type : dvfs_int - id : 1
[ 0.402517] [7: swapper/0: 1] num_of_lv : 5
[ 0.402524] [7: swapper/0: 1] num_of_members : 4
[ 0.402533] [7: swapper/0: 1] lv : [ 533000], volt = 775000 uV (0 %)
[ 0.402543] [7: swapper/0: 1] lv : [ 333000], volt = 656250 uV (0 %)
[ 0.402552] [7: swapper/0: 1] lv : [ 267000], volt = 618750 uV (0 %)
[ 0.402560] [7: swapper/0: 1] lv : [ 133000], volt = 606250 uV (0 %)
[ 0.402569] [7: swapper/0: 1] lv : [ 107000], volt = 606250 uV (0 %)
[ 0.402579] [7: swapper/0: 1] dvfs_type : dvfs_cpucl0 - id : 2
[ 0.402586] [7: swapper/0: 1] num_of_lv : 17
[ 0.402593] [7: swapper/0: 1] num_of_members : 2
[ 0.402602] [7: swapper/0: 1] lv : [2496000], volt = 0 uV (0 %)
[ 0.402612] [7: swapper/0: 1] lv : [2392000], volt = 0 uV (0 %)
[ 0.402621] [7: swapper/0: 1] lv : [2288000], volt = 0 uV (0 %)
[ 0.402631] [7: swapper/0: 1] lv : [2184000], volt = 1243750 uV (0 %)
[ 0.402641] [7: swapper/0: 1] lv : [2080000], volt = 1181250 uV (0 %)
[ 0.402651] [7: swapper/0: 1] lv : [1976000], volt = 1125000 uV (0 %)
[ 0.402661] [7: swapper/0: 1] lv : [1872000], volt = 1081250 uV (0 %)
[ 0.402669] [7: swapper/0: 1] lv : [1768000], volt = 1037500 uV (0 %)
[ 0.402678] [7: swapper/0: 1] lv : [1664000], volt = 1000000 uV (0 %)
[ 0.402688] [7: swapper/0: 1] lv : [1560000], volt = 962500 uV (0 %)
[ 0.402696] [7: swapper/0: 1] lv : [1352000], volt = 887500 uV (0 %)
[ 0.402705] [7: swapper/0: 1] lv : [1144000], volt = 818750 uV (0 %)
[ 0.402714] [7: swapper/0: 1] lv : [ 936000], volt = 762500 uV (0 %)
[ 0.402723] [7: swapper/0: 1] lv : [ 728000], volt = 700000 uV (0 %)
[ 0.402731] [7: swapper/0: 1] lv : [ 520000], volt = 643750 uV (0 %)
[ 0.402740] [7: swapper/0: 1] lv : [ 312000], volt = 600000 uV (0 %)
[ 0.402748] [7: swapper/0: 1] lv : [ 208000], volt = 600000 uV (0 %)
[ 0.402758] [7: swapper/0: 1] dvfs_type : dvfs_cpucl1 - id : 3
[ 0.402766] [7: swapper/0: 1] num_of_lv : 18
[ 0.402773] [7: swapper/0: 1] num_of_members : 4
[ 0.402783] [7: swapper/0: 1] lv : [2002000], volt = 0 uV (0 %)
[ 0.402792] [7: swapper/0: 1] lv : [1898000], volt = 0 uV (0 %)
[ 0.402801] [7: swapper/0: 1] lv : [1794000], volt = 0 uV (0 %)
[ 0.402812] [7: swapper/0: 1] lv : [1690000], volt = 1087500 uV (0 %)
[ 0.402820] [7: swapper/0: 1] lv : [1586000], volt = 1037500 uV (0 %)
[ 0.402829] [7: swapper/0: 1] lv : [1482000], volt = 987500 uV (0 %)
[ 0.402837] [7: swapper/0: 1] lv : [1352000], volt = 931250 uV (0 %)
[ 0.402845] [7: swapper/0: 1] lv : [1248000], volt = 893750 uV (0 %)
[ 0.402855] [7: swapper/0: 1] lv : [1144000], volt = 856250 uV (0 %)
[ 0.402863] [7: swapper/0: 1] lv : [1014000], volt = 806250 uV (0 %)
[ 0.402871] [7: swapper/0: 1] lv : [ 902000], volt = 768750 uV (0 %)
[ 0.402880] [7: swapper/0: 1] lv : [ 839000], volt = 750000 uV (0 %)
[ 0.402888] [7: swapper/0: 1] lv : [ 757000], volt = 731250 uV (0 %)
[ 0.402897] [7: swapper/0: 1] lv : [ 676000], volt = 706250 uV (0 %)
[ 0.402906] [7: swapper/0: 1] lv : [ 546000], volt = 668750 uV (0 %)
[ 0.402915] [7: swapper/0: 1] lv : [ 449000], volt = 637500 uV (0 %)
[ 0.402923] [7: swapper/0: 1] lv : [ 343000], volt = 612500 uV (0 %)
[ 0.402931] [7: swapper/0: 1] lv : [ 208000], volt = 600000 uV (0 %)
[ 0.402941] [7: swapper/0: 1] dvfs_type : dvfs_g3d - id : 4
[ 0.402948] [7: swapper/0: 1] num_of_lv : 9
[ 0.402956] [7: swapper/0: 1] num_of_members : 1
[ 0.402965] [7: swapper/0: 1] lv : [1300000], volt = 1200000 uV (0 %)
[ 0.402975] [7: swapper/0: 1] lv : [1200000], volt = 1093750 uV (0 %)
[ 0.402983] [7: swapper/0: 1] lv : [1100000], volt = 1018750 uV (0 %)
[ 0.402991] [7: swapper/0: 1] lv : [1001000], volt = 943750 uV (0 %)
[ 0.403001] [7: swapper/0: 1] lv : [ 845000], volt = 843750 uV (0 %)
[ 0.403009] [7: swapper/0: 1] lv : [ 676000], volt = 756250 uV (0 %)
[ 0.403017] [7: swapper/0: 1] lv : [ 545000], volt = 718750 uV (0 %)
[ 0.403027] [7: swapper/0: 1] lv : [ 450000], volt = 681250 uV (0 %)
[ 0.403035] [7: swapper/0: 1] lv : [ 343000], volt = 625000 uV (0 %)
[ 0.403046] [7: swapper/0: 1] dvfs_type : dvfs_fsys - id : 5
[ 0.403054] [7: swapper/0: 1] num_of_lv : 4
[ 0.403060] [7: swapper/0: 1] num_of_members : 2
[ 0.403069] [7: swapper/0: 1] lv : [ 267000], volt = 750000 uV (0 %)
[ 0.403077] [7: swapper/0: 1] lv : [ 200000], volt = 675000 uV (0 %)
[ 0.403086] [7: swapper/0: 1] lv : [ 100000], volt = 625000 uV (0 %)
[ 0.403094] [7: swapper/0: 1] lv : [ 50000], volt = 625000 uV (0 %)
[ 0.403103] [7: swapper/0: 1] dvfs_type : dvfs_cam - id : 6
[ 0.403110] [7: swapper/0: 1] num_of_lv : 5
[ 0.403116] [7: swapper/0: 1] num_of_members : 9
[ 0.403125] [7: swapper/0: 1] lv : [ 690000], volt = 793750 uV (0 %)
[ 0.403134] [7: swapper/0: 1] lv : [ 680000], volt = 725000 uV (0 %)
[ 0.403142] [7: swapper/0: 1] lv : [ 670000], volt = 718750 uV (0 %)
[ 0.403151] [7: swapper/0: 1] lv : [ 660000], volt = 643750 uV (0 %)
[ 0.403160] [7: swapper/0: 1] lv : [ 650000], volt = 606250 uV (0 %)
[ 0.403169] [7: swapper/0: 1] dvfs_type : dvfs_disp - id : 7
[ 0.403175] [7: swapper/0: 1] num_of_lv : 4
[ 0.403182] [7: swapper/0: 1] num_of_members : 2
[ 0.403191] [7: swapper/0: 1] lv : [ 267000], volt = 637500 uV (0 %)
[ 0.403202] [7: swapper/0: 1] lv : [ 222000], volt = 612500 uV (0 %)
[ 0.403210] [7: swapper/0: 1] lv : [ 167000], volt = 606250 uV (0 %)
[ 0.403218] [7: swapper/0: 1] lv : [ 80000], volt = 606250 uV (0 %)
[ 0.403227] [7: swapper/0: 1] dvfs_type : dvfs_aud - id : 8
[ 0.403234] [7: swapper/0: 1] num_of_lv : 4
[ 0.403241] [7: swapper/0: 1] num_of_members : 3
[ 0.403250] [7: swapper/0: 1] lv : [1180000], volt = 768750 uV (0 %)
[ 0.403259] [7: swapper/0: 1] lv : [ 800000], volt = 662500 uV (0 %)
[ 0.403268] [7: swapper/0: 1] lv : [ 590000], volt = 612500 uV (0 %)
[ 0.403276] [7: swapper/0: 1] lv : [ 394000], volt = 600000 uV (0 %)
[ 0.403285] [7: swapper/0: 1] dvfs_type : dvs_cp - id : 9
[ 0.403292] [7: swapper/0: 1] num_of_lv : 2
[ 0.403299] [7: swapper/0: 1] num_of_members : 1
[ 0.403307] [7: swapper/0: 1] lv : [1000000], volt = 750000 uV (0 %)
[ 0.403316] [7: swapper/0: 1] lv : [ 800000], volt = 750000 uV (0 %)
[ 0.403487] [7: swapper/0: 1] Trying to unpack rootfs image as initramfs...
[ 0.506644] [7: swapper/0: 1] Freeing initrd memory: 3632K (ffffffc003000000 - ffffffc00338c000)
[ 0.508017] [7: swapper/0: 1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.510085] [6: swapper/0: 1] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.510162] [6: swapper/0: 1] audit: initializing netlink subsys (enabled)
[ 0.517984] [6: swapper/0: 1] VFS: Disk quotas dquot_6.6.0
[ 0.518101] [6: swapper/0: 1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.519103] [6: swapper/0: 1] [SDFAT] Filesystem version 1.4.10
[ 0.519663] [6: swapper/0: 1] Registering sdcardfs 3.2.1
[ 0.519778] [6: swapper/0: 1] fuse init (API version 7.23)
[ 0.520059] [6: swapper/0: 1] SELinux: Registering netfilter hooks
[ 0.520407] [6: swapper/0: 1] tima_uevent_init
[ 0.520475] [6: swapper/0: 1] TIMA uevent driver (tima_uevent) is initialized.
[ 0.520491] [6: swapper/0: 1] mst_drv_init
[ 0.520867] [6: swapper/0: 1] mst_ldo_device_probe init start
[ 0.520889] [6: swapper/0: 1] [MST] Data Value : 127
[ 0.520900] [6: swapper/0: 1] MST_DRV]]] gpio pwr en inited
[ 0.520923] [6: swapper/0: 1] sec_mst_gpio_init : Send Output
[ 0.520933] [6: swapper/0: 1] mst_ldo_device_probe
[ 0.521003] [6: swapper/0: 1] MST drv driver (mst_drv) is initialized.
[ 0.521036] [6: swapper/0: 1] MST_LDO_DRV]]] init , ret val : 0
[ 0.521402] [6: swapper/0: 1] key_dump feature not availabledek: initialized
[ 0.521425] [6: swapper/0: 1] SDP_MM: entering************************************************
[ 0.521570] [6: swapper/0: 1] SDP_PUB_CRYPTO[1] : pub_crypto_mod_init netlink socket is created successfully!
[ 0.521693] [6: swapper/0: 1] SDP_FS_HANDLER[1] : sdp_fs_handler_mod_init netlink socket is created successfully!
[ 0.521780] [6: swapper/0: 1] DLP: dlp_ioctl initialized
[ 0.524534] [7: swapper/0: 1] io scheduler noop registered
[ 0.524735] [7: swapper/0: 1] io scheduler cfq registered (default)
[ 0.525099] [7: swapper/0: 1] exynos-mipi-phy phy_m4s4_dsi@0x12821008: mipi-phy reset be controlled from outside!!!
[ 0.525115] [7: swapper/0: 1] exynos-mipi-phy phy_m4s4_dsi@0x12821008: exynos_mipi_phy_probe: iso 0x678, reset -1 (-1)
[ 0.525225] [7: swapper/0: 1] exynos-mipi-phy phy_m4s4_dsi@0x12821008: Creating exynos-mipi-phy
[ 0.525437] [7: swapper/0: 1] exynos-mipi-phy 14510840.phy_isp_csis0: doesn't use mipi-phy init control!!!
[ 0.525453] [7: swapper/0: 1] exynos-mipi-phy 14510840.phy_isp_csis0: exynos_mipi_phy_probe: iso 0x680, reset 8 (-1)
[ 0.525536] [7: swapper/0: 1] exynos-mipi-phy 14510840.phy_isp_csis0: Creating exynos-mipi-phy
[ 0.525612] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis1@14510840: exynos_mipi_phy_probe: iso 0x67c, reset 16 (-1)
[ 0.525689] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis1@14510840: Creating exynos-mipi-phy
[ 0.525752] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis2@14510840: exynos_mipi_phy_probe: iso 0x67c, reset 24 (-1)
[ 0.525827] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis2@14510840: Creating exynos-mipi-phy
[ 0.525894] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis3@14510840: exynos_mipi_phy_probe: iso 0x678, reset 0 (-1)
[ 0.525972] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis3@14510840: Creating exynos-mipi-phy
[ 0.526507] [7: swapper/0: 1] exynos_usbdrd_phy_probe: +++ 135d0000.phy
[ 0.526533] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: It has not the other phy
[ 0.526548] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: It is TYPE USB3DRD
[ 0.526563] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: don't need user Mux for phyclk
[ 0.526818] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: non-DT: PHY CON Selection
[ 0.527669] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: don't need usbphy tuning info for super speed
[ 0.527686] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: don't need usbphy tuning info for super speed
[ 0.527773] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: exynos_usbdrd_fill_hstune_param hs tune cnt = 12
[ 0.527798] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: usbphy info: version:0x300, refclk:0x7
[ 0.527812] [7: swapper/0: 1] exynos_usbdrd_phy_probe: ---
[ 0.528308] [7: swapper/0: 1] samsung-pwm 13970000.pwm: base_clk at 66625000
[ 0.528707] [7: swapper/0: 1] exynos-itmon ITMON@0: success to register request irq57 - ITMON_DATA
[ 0.528797] [7: swapper/0: 1] exynos-itmon ITMON@0: success to register request irq58 - ITMON_PERI
[ 0.528895] [7: swapper/0: 1] exynos-itmon ITMON@0: success to probe Exynos ITMON driver
[ 0.529175] [7: swapper/0: 1] persistent_ram: found existing buffer, size 0, start 0
[ 0.529201] [7: swapper/0: 1] persistent_ram: found existing buffer, size 0, start 0
[ 0.529223] [7: swapper/0: 1] persistent_ram: found existing buffer, size 0, start 0
[ 0.529259] [7: swapper/0: 1] persistent_ram: found existing buffer, size 300328, start 300328
[ 0.529568] [7: swapper/0: 1] pstore: Registered ramoops as persistent store backend
[ 0.529581] [7: swapper/0: 1] ramoops: attached 0x200000@0x92400000, ecc: 0/0
[ 0.531537] [6: swapper/0: 1] dma-pl330 12020000.pdma0: Loaded driver for PL330 DMAC-341330
[ 0.531554] [6: swapper/0: 1] dma-pl330 12020000.pdma0: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.532602] [5: swapper/0: 1] exynos-seclog seclog: Message buffer address[0xc0000000], Message buffer size[0x80000]
[ 0.532627] [5: swapper/0: 1] exynos-seclog seclog: Exynos Secure Log driver probe done!
[ 0.533033] [6: swapper/0: 1] [HDCP2]hdcp_init:341: hdcp2 driver init
[ 0.533676] [6: swapper/0: 1] 13810000.uart: ttySAC1 at MMIO 0x13810000 (irq = 60, base_baud = 0) is a S3C6400/10
[ 0.534117] [6: swapper/0: 1] 13820000.uart: ttySAC2 at MMIO 0x13820000 (irq = 61, base_baud = 0) is a S3C6400/10
[ 0.534903] [6: swapper/0: 1] [ExyRNG] passed the start-up test
[ 0.536210] [7: swapper/0: 1] ExyRNG: hwrng registered
[ 0.536249] [7: swapper/0: 1] ExyRNG driver, (c) 2014 Samsung Electronics
[ 0.536480] [7: swapper/0: 1] mali 11500000.mali: Continuing without Mali regulator control
[ 0.536496] [7: swapper/0: 1] mali 11500000.mali: Continuing without Mali clock control
[ 0.536686] [7: swapper/0: 1] [G3D] G3D 1300000Khz ASV is 1200000uV
[ 0.536696] [7: swapper/0: 1] [G3D] G3D 1200000Khz ASV is 1093750uV
[ 0.536705] [7: swapper/0: 1] [G3D] G3D 1100000Khz ASV is 1018750uV
[ 0.536714] [7: swapper/0: 1] [G3D] G3D 1001000Khz ASV is 943750uV
[ 0.536724] [7: swapper/0: 1] [G3D] G3D 845000Khz ASV is 843750uV
[ 0.536733] [7: swapper/0: 1] [G3D] G3D 676000Khz ASV is 756250uV
[ 0.536742] [7: swapper/0: 1] [G3D] G3D 545000Khz ASV is 718750uV
[ 0.536749] [7: swapper/0: 1] [G3D] G3D 450000Khz ASV is 681250uV
[ 0.536756] [7: swapper/0: 1] [G3D] G3D 343000Khz ASV is 625000uV
[ 0.536975] [7: swapper/0: 1] [G3D] [GPU] core fused reg info, Addr[0xffffff800027e024], Data[0x0]
[ 0.536987] [7: swapper/0: 1] [G3D] [GPU] core shift info = 0x0
[ 0.537216] [7: swapper/0: 1] mali 11500000.mali: GPU identified as 0x60a0 r0p0 status 2
[ 0.537290] [7: swapper/0: 1] mali 11500000.mali: Support Secure Rendering with Exynos SoC
[ 0.537768] [6: swapper/0: 1] mali 11500000.mali: Probed as mali0
[ 0.537941] [6: swapper/0: 1] vbus_notifier_init
[ 0.537956] [6: swapper/0: 1] [MUIC] muic_notifier_init
[ 0.538307] [6: swapper/0: 1] Unable to detect cache hierarchy from DT for CPU 0
[ 0.549824] [7: swapper/0: 1] brd: module loaded
[ 0.557897] [6: swapper/0: 1] loop: module loaded
[ 0.558259] [6: swapper/0: 1] mcu_ipc 12080000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start.
[ 0.558388] [6: swapper/0: 1] mcu_ipc 12080000.mcu_ipc: irq_affinity_mask = 0x3
[ 0.558405] [6: swapper/0: 1] mcu_ipc 12080000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done.
[ 0.558452] [6: swapper/0: 1] mcu_ipc 120d0000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start.
[ 0.558509] [6: swapper/0: 1] mcu_ipc 120d0000.mcu_ipc: Failed to get affinity mask
[ 0.558520] [6: swapper/0: 1] mcu_ipc 120d0000.mcu_ipc: Can't set IRQ affinity with(-19)
[ 0.558531] [6: swapper/0: 1] mcu_ipc 120d0000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done.
[ 0.558928] [6: swapper/0: 1] shm_ipc shmem@F6E00000: shm_probe: shmem driver init
[ 0.558960] [6: swapper/0: 1] shm_ipc shmem@F6E00000: cp_mem_base: 0xf5400000, 0xffffff8000296000
[ 0.558984] [6: swapper/0: 1] shm_ipc shmem@F6E00000: paddr=0xF5400000, total_size=0x08800000, ipc_off=0x08000000, ipc_size=0x00800000, cp_size=0x07900000, vss_size=0x00700000
[ 0.558998] [6: swapper/0: 1] shm_ipc shmem@F6E00000: zmb_off=0x00000000, zmb_size=0x00000000
[ 0.559011] [6: swapper/0: 1] shm_ipc shmem@F6E00000: acpm_base=0x02052000, acpm_size=0x0001B000
[ 0.559022] [6: swapper/0: 1] Release cplog reserved memory
[ 0.562665] [6: swapper/0: 1] usim_detect_probe +++
[ 0.562680] [6: swapper/0: 1] num_of_usim_det: 2
[ 0.562808] [7: swapper/0: 1] wake enabled for irq 156
[ 0.562829] [0:irq/156-usim_de: 1177] usim_dt_interrupt0: MODEM_STATE is not online, Do not anyting.
[ 0.562900] [7: swapper/0: 1] wake enabled for irq 157
[ 0.562915] [0:irq/157-usim_de: 1178] usim_dt_interrupt1: MODEM_STATE is not online, Do not anyting.
[ 0.562924] [7: swapper/0: 1] init value of usim_det0: 0
[ 0.562937] [7: swapper/0: 1] init value of usim_det1: 0
[ 0.562952] [7: swapper/0: 1] usim_detect_probe ---
[ 0.563264] [7: swapper/0: 1] gif: gnss_probe: gnss_pdata: +++
[ 0.563282] [7: swapper/0: 1] gif_exynos gnss_pdata: assigned reserved memory node gnss_if
[ 0.563411] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:5] reg_rx_ipc_msg
[ 0.563422] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:4] reg_tx_ipc_msg
[ 0.563432] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:3] reg_rx_head
[ 0.563442] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:2] reg_rx_tail
[ 0.563452] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:1] reg_tx_head
[ 0.563462] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:0] reg_tx_tail
[ 0.563473] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Fault info: gnss_fault_info [1:2097152:1572864]
[ 0.563483] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: DT parse complete!
[ 0.563500] [7: swapper/0: 1] gif: init_gnssctl_device: [GNSS IF] Initializing GNSS Control
[ 0.563685] [7: swapper/0: 1] gif: init_gnssctl_device: Using simple lock sequence!!!
[ 0.563696] [7: swapper/0: 1] gif: init_gnssctl_device: Initializing shared memory for GNSS.
[ 0.563707] [7: swapper/0: 1] gif: set_shdmem_size: Set shared mem size: 4194304B
[ 0.563724] [7: swapper/0: 1] gif: set_shdmem_base: Set shared mem baseaddr : 0xffc00000
[ 0.563746] [7: swapper/0: 1] gif: init_gnssctl_device: [GNSS IF] Register mailbox for GNSS2AP fault handling
[ 0.563797] [7: swapper/0: 1] gnss_pdata supply vdd_sensor_2p85 not found, using dummy regulator
[ 0.563860] [7: swapper/0: 1] gif: init_gnssctl_device: ---
[ 0.563872] [7: swapper/0: 1] gif: create_ctl_device: KEPLER is created!!!
[ 0.563884] [7: swapper/0: 1] gif: create_link_device_shmem: SHMEM: KEPLER
[ 0.564096] [7: swapper/0: 1] gif: create_link_device_shmem: GNSS_SHDMEM: Reserved Region phys_addr:0xFFC00000 virt_addr:0xffffff8000b86000 size: 3670016
[ 0.564143] [7: swapper/0: 1] gif: create_link_device_shmem: GNSS_SHDMEM: Fault Region phys_addr:0xFFE00000 virt_addr:0xffffff8000f07000 size:1572864
[ 0.564168] [7: swapper/0: 1] gif: create_link_device_shmem: GNSS_SHDMEM: IPC Region phys_addr:0xFFF80000 virt_addr:0xffffff8001088000 size:524288
[ 0.564179] [7: swapper/0: 1] gif: shmem_remap_ipc_region: RX region : 40000 @ ffffff8001088000
[ 0.564189] [7: swapper/0: 1] gif: shmem_remap_ipc_region: TX region : 3ff80 @ ffffff80010c8000
[ 0.564199] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_rx_ipc_msg -> ffffff8001107f94
[ 0.564208] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_tx_ipc_msg -> ffffff8001107f90
[ 0.564218] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_rx_head -> ffffff8001107f8c
[ 0.564225] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_rx_tail -> ffffff8001107f88
[ 0.564233] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_tx_head -> ffffff8001107f84
[ 0.564243] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_tx_tail -> ffffff8001107f80
[ 0.564563] [6: swapper/0: 1] gif: create_io_device: gnss_ipc created
[ 0.564573] [6: swapper/0: 1] gif: gnss_probe: KEPLER: ---
[ 0.564848] [6: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: +++ (eur_open)
[ 0.565015] [6: swapper/0: 1] mif: modem_if_parse_dt_pdata: DT parse complete!
[ 0.565183] [6: swapper/0: 1] mif: ss310ap_init_modemctl_device: +++
[ 0.565248] [6: swapper/0: 1] mif: mif_init_irq: name:cp_fail num:124 flags:0x00014000
[ 0.565282] [6: swapper/0: 1] mif: mif_request_irq: cp_fail(#124) handler registered (flags:0x00014000)
[ 0.565302] [6: swapper/0: 1] mif: mif_disable_irq: cp_fail(#124) is disabled <ss310ap_init_modemctl_device>
[ 0.565333] [6: swapper/0: 1] mif: mif_init_irq: name:cp_wdt num:125 flags:0x00014000
[ 0.565358] [6: swapper/0: 1] mif: mif_request_irq: cp_wdt(#125) handler registered (flags:0x00014000)
[ 0.565370] [6: swapper/0: 1] mif: mif_disable_irq: cp_wdt(#125) is disabled <ss310ap_init_modemctl_device>
[ 0.565386] [6: swapper/0: 1] mif: ss310ap_init_modemctl_device: cp_rst_n: Invalied gpio pins
[ 0.565395] [6: swapper/0: 1] mif: ss310ap_init_modemctl_device: ---
[ 0.565404] [6: swapper/0: 1] mif: create_modemctl_device: s327ap is created!!!
[ 0.565413] [6: swapper/0: 1] mif: shmem_create_link_device: +++
[ 0.565423] [6: swapper/0: 1] mif: shmem_create_link_device: MODEM:s327ap LINK:shmem
[ 0.565450] [6: swapper/0: 1] mif: shmem_create_link_device: shmem<->s327ap: LINK_ATTR_SBD_IPC
[ 0.565502] [6: swapper/0: 1] mif: shmem_create_link_device: shmem<->s327ap: LINK_ATTR_DPRAM_MAGIC
[ 0.568063] [6: swapper/0: 1] mif: shmem_create_link_device: boot_base=ffffff8001109000, boot_size=134217728
[ 0.568236] [6: swapper/0: 1] mif: shmem_create_link_device: ipc_base=ffffff800910a000, ipc_size=8388608
[ 0.568382] [6: swapper/0: 1] mif: shmem_create_link_device: vss_base=ffffff800990b000
[ 0.568404] [6: swapper/0: 1] mif: shmem_create_link_device: Parsing MIF table...
[ 0.568422] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[10] : 2093000
[ 0.568432] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[9] : 2002000
[ 0.568442] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[8] : 1794000
[ 0.568452] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[7] : 1539000
[ 0.568462] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[6] : 1352000
[ 0.568471] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[5] : 1014000
[ 0.568481] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[4] : 845000
[ 0.568489] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[3] : 676000
[ 0.568498] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[2] : 546000
[ 0.568507] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[1] : 420000
[ 0.568514] [6: swapper/0: 1] mif: shmem_create_link_device: Parsing CL0 table...
[ 0.568526] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[17] : 2496000
[ 0.568538] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[16] : 2392000
[ 0.568549] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[15] : 2288000
[ 0.568558] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[14] : 2184000
[ 0.568567] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[13] : 2080000
[ 0.568576] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[12] : 1976000
[ 0.568584] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[11] : 1872000
[ 0.568594] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[10] : 1768000
[ 0.568603] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[9] : 1664000
[ 0.568612] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[8] : 1560000
[ 0.568621] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[7] : 1352000
[ 0.568630] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[6] : 1144000
[ 0.568640] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[5] : 936000
[ 0.568650] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[4] : 728000
[ 0.568659] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[3] : 520000
[ 0.568669] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[2] : 312000
[ 0.568679] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[1] : 208000
[ 0.568687] [6: swapper/0: 1] mif: shmem_create_link_device: Parsing CL1 table...
[ 0.568701] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[18] : 2002000
[ 0.568711] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[17] : 1898000
[ 0.568720] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[16] : 1794000
[ 0.568730] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[15] : 1690000
[ 0.568741] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[14] : 1586000
[ 0.568751] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[13] : 1482000
[ 0.568759] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[12] : 1352000
[ 0.568768] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[11] : 1248000
[ 0.568777] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[10] : 1144000
[ 0.568785] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[9] : 1014000
[ 0.568794] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[8] : 902000
[ 0.568803] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[7] : 839000
[ 0.568812] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[6] : 757000
[ 0.568822] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[5] : 676000
[ 0.568831] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[4] : 546000
[ 0.568840] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[3] : 449000
[ 0.568849] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[2] : 343000
[ 0.568858] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[1] : 208000
[ 0.568867] [6: swapper/0: 1] mif: shmem_create_link_device: Parsing INT table...
[ 0.568884] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: INT_LEV[5] : 533000
[ 0.568894] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: INT_LEV[4] : 333000
[ 0.568904] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: INT_LEV[3] : 267000
[ 0.568914] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: INT_LEV[2] : 133000
[ 0.568925] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: INT_LEV[1] : 107000
[ 0.568935] [6: swapper/0: 1] mif: shmem_create_link_device: packet log device create fail
[ 0.568948] [6: swapper/0: 1] clean_vss_magic_code: set vss magic code as 0
[ 0.568982] [6: swapper/0: 1] mif: shmem_create_link_device: ---
[ 0.568996] [6: swapper/0: 1] mif: modem_probe: s327ap: shmem link created
[ 0.569129] [6: swapper/0: 1] mif: create_io_device: umts_ipc0 created
[ 0.569267] [6: swapper/0: 1] mif: create_io_device: umts_ipc1 created
[ 0.569394] [6: swapper/0: 1] mif: create_io_device: umts_rfs0 created
[ 0.569501] [6: swapper/0: 1] mif: create_io_device: umts_csd created
[ 0.569615] [6: swapper/0: 1] mif: create_io_device: umts_router created
[ 0.570007] [6: swapper/0: 1] mif: sipc5_init_io_device: iod:umts_dm0, both registerd
[ 0.570017] [6: swapper/0: 1] mif: create_io_device: umts_dm0 created
[ 0.570106] [6: swapper/0: 1] mif: create_io_device: ipc_loopback0 created
[ 0.570392] [6: swapper/0: 1] mif: create_io_device: rmnet0 created
[ 0.570670] [6: swapper/0: 1] mif: create_io_device: rmnet1 created
[ 0.570940] [6: swapper/0: 1] mif: create_io_device: rmnet2 created
[ 0.571200] [6: swapper/0: 1] mif: create_io_device: rmnet3 created
[ 0.571454] [6: swapper/0: 1] mif: create_io_device: rmnet4 created
[ 0.571791] [6: swapper/0: 1] mif: create_io_device: rmnet5 created
[ 0.572065] [6: swapper/0: 1] mif: create_io_device: rmnet6 created
[ 0.572317] [6: swapper/0: 1] mif: create_io_device: rmnet7 created
[ 0.572487] [6: swapper/0: 1] mif: create_io_device: multipdp_hiprio created
[ 0.572620] [6: swapper/0: 1] mif: create_io_device: multipdp created
[ 0.572631] [6: swapper/0: 1] mif: create_io_device: BOOT device = umts_boot0
[ 0.572718] [6: swapper/0: 1] mif: create_io_device: umts_boot0 created
[ 0.572830] [6: swapper/0: 1] mif: create_io_device: umts_ramdump0 created
[ 0.572854] [6: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: ---
[ 0.572985] [6: swapper/0: 1] Samlog Debugfs Initialized
[ 0.572998] [6: swapper/0: 1] scsc_logring:: Allocated STATIC ring buffer of size 4194304 bytes.
[ 0.573009] [6: swapper/0: 1] Samlog Loaded.
[ 0.573020] [6: swapper/0: 1] Samlog Started.
[ 0.573216] [6: swapper/0: 1] platform_mif_create: Creating MIF platform device
[ 0.573247] [6: swapper/0: 1] platform_mif_create: WLBT TZASC configured OK
[ 0.573264] [6: swapper/0: 1] platform_mif_create: platform->mem_start 0xe9000000 platform->mem_size 0x400000
[ 0.573283] [6: swapper/0: 1] platform_mif_create: platform->btaboxmem_start 0x8fe400000 platform->btaboxmem_size 0x400000
[ 0.573317] [6: swapper/0: 1] platform_mif_create: platform->reg_start 120c0000 size 180 base ffffff800029e000
[ 0.573340] [6: swapper/0: 1] platform_mif_create: platform->reg_start_m4 120e0000 size_m4 180 base_m4 ffffff80002b2000
[ 0.573357] [6: swapper/0: 1] platform_mif_create: MBOX irq 95 flag 0x404
[ 0.573373] [6: swapper/0: 1] platform_mif_create: ALIVE irq 96 flag 0x404
[ 0.573388] [6: swapper/0: 1] platform_mif_create: WDOG irq 97 flag 0x404
[ 0.573589] [6: swapper/0: 1] scsc_mx_module_init: mx140 Core Driver scsc_release 5.27.1 (build type: User
[ 0.573589] [6: swapper/0: 1] )
[ 0.573614] [6: swapper/0: 1] platform_mif_irq_reg_handler: Registering mif int handler mifiintrman_isr+0x0/0xc4 in ffffffc874540818 ffffffc874540818
[ 0.573633] [6: swapper/0: 1] platform_mif_suspend_reg_handler: Registering mif suspend/resume handlers in ffffffc874540818 ffffffc874540818
[ 0.573831] [7: swapper/0: 1] srvman_init:
[ 0.573863] [7: swapper/0: 1] scsc_mx_module_probe_registered_clients: No clients registered
[ 0.573885] [7: swapper/0: 1] mx_mmap_init: mx_mmap INIT; version: 0.0
[ 0.574053] [7: swapper/0: 1] platform_mif_get_mifram_ptr: Memory unmmaped
[ 0.574074] [7: swapper/0: 1] scsc_bt_module_init: SCSC MX BT Driver -devel (C) Samsung Electronics Co., Ltd
[ 0.574315] [7: swapper/0: 1] slsi_bt_service_probe: BT service probe (BT driver ffffffc874994000)
[ 0.574332] [7: swapper/0: 1] slsi_ant_service_probe: ANT service probe (ANT driver ffffffc874994000)
[ 0.574501] [7: swapper/0: 1] tima_debug_log_read_init: Registering /proc/tima_debug_log Interface
[ 0.574518] [7: swapper/0: 1] dmverity_odin_flag_read_init:: Registering /proc/dmverity_odin_flag Interface
[ 0.574532] [7: swapper/0: 1] s2mu004:s2mu004_i2c_init
[ 0.574664] [7: swapper/0: 1] s2mu004 6-003d: s2mu004_i2c_probe start
[ 0.574682] [7: swapper/0: 1] of_s2mu004_dt: irq-gpio: 24
[ 0.575432] [7: swapper/0: 1] [s2mu004 mfd] s2mu004_i2c_probe : 0x38, rev=0x3, ver=0x8
[ 0.575447] [7: swapper/0: 1] s2mu004:s2mu004_irq_init irq=131, irq->gpio=24
[ 0.663172] [6: swapper/0: 1] [MUIC] s2mu004_muic_probe start
[ 0.663281] [6: swapper/0: 1] [MUIC] muic_notifier_register: listener=0 register
[ 0.663291] [6: swapper/0: 1] [MUIC] muic_handle_dock_notification: ignore(70)
[ 0.663299] [6: swapper/0: 1] [MUIC] muic_init_switch_dev_cb: done
[ 0.663307] [6: swapper/0: 1] [MUIC] muic_manager_init
[ 0.663315] [6: swapper/0: 1] [MUIC] muic_manager_register_notifier: Registering CCIC_NOTIFY_DEV_MUIC.
[ 0.663323] [6: swapper/0: 1] [MUIC] muic_manager_init_dev_desc
[ 0.663331] [6: swapper/0: 1] usb: [M] manager_notifier_init
[ 0.663377] [6: swapper/0: 1] vbus_notifier_register: listener=2 register
[ 0.663390] [6: swapper/0: 1] usb: [M] manager_handle_vbus_notification: cmd=0, vbus_type=LOW, WATER DET=0 ATTACH=DETATCH (0)
[ 0.663398] [6: swapper/0: 1] ccic_notifier_register: listener=6 register
[ 0.663405] [6: swapper/0: 1] ccic_notifier_init
[ 0.663452] [6: swapper/0: 1] usb: [M] manager_handle_ccic_notification: src:INITIAL dest:INITIAL id:ID_INITIAL attach/rid:0
[ 0.663463] [6: swapper/0: 1] usb: [M] manager_notifier_notify: src:INITIAL dest:INITIAL id:ID_INITIAL sub1:00 sub2:00 sub3:00
[ 0.663482] [6: swapper/0: 1] usb_notify: register_usblog_proc size=22592
[ 0.663491] [6: swapper/0: 1] usb: [M] manager_notifier_notify: notify done(0x0)
[ 0.663498] [6: swapper/0: 1] [MUIC] muic_notifier_register: listener=8 register
[ 0.663506] [6: swapper/0: 1] usb: [M] manager_handle_muic_notification: attach:0, cable_type:70
[ 0.663514] [6: swapper/0: 1] usb: [M] manager_handle_muic_notification: Cable(70) Detached
[ 0.663523] [6: swapper/0: 1] usb: [M] manager_notifier_notify: src:MUIC dest:BATTERY id:ID_ATTACH sub1:00 sub2:00 sub3:46
[ 0.663530] [6: swapper/0: 1] usb: [M] manager_notifier_notify: notify done(0x0)
[ 0.663538] [6: swapper/0: 1] manager_notifier_init : result of register = 0!
[ 0.663545] [6: swapper/0: 1] manager_notifier_init : done!
[ 0.663555] [6: swapper/0: 1] usb: [M] manager_notifier_init end
[ 0.663563] [6: swapper/0: 1] usb: [M] manager_notifier_register: listener=21 register
[ 0.663574] [6: swapper/0: 1] [MUIC] muic_manager_register_notifier: done.
[ 0.663607] [6: swapper/0: 1] [MUIC] s2mu004_muic_init_interface, muic_if : 0xffffffc07f50a000, muic_data : 0xffffffc8738c8018
[ 0.663677] [6: swapper/0: 1] [MUIC] of_s2mu004_muic_dt : could not find muic sub-node np_muic
[ 0.663689] [6: swapper/0: 1] [MUIC] no muic dt! ret[-22]
[ 0.663703] [6: swapper/0: 1] [MUIC] muic_init_gpio_cb (11)
[ 0.663711] [6: swapper/0: 1] [MUIC] [muic_core] func not defined muic_init_gpio_cb
[ 0.663736] [6: swapper/0: 1] [MUIC] AP_UART, GPIO_UART_SEL(0)=H
[ 0.663748] [6: swapper/0: 1] [MUIC] muic_init_gpio_cb: usb_path(PDA), uart_path(AP)
[ 0.664476] [6: swapper/0: 1] [MUIC] s2mu004_init_rev_info : vendor=0x5, ver=0x8, dev_id=0x38
[ 0.664476] [6: swapper/0: 1] rev id =0x3
[ 0.664492] [6: swapper/0: 1] [MUIC] s2mu004_muic_reg_init
[ 0.667618] [6: swapper/0: 1] [MUIC] dev[1:0x80, 2:0x0, 3:0x0], adc:0x0
[ 0.667629] [6: swapper/0: 1] [MUIC] s2mu004 s2mu004_muic_reg_init s2mu004 usb-c type
[ 0.669634] [6: swapper/0: 1] [MUIC] s2mu004_muic_control_rid_adc (Enable)
[ 0.670726] [6: swapper/0: 1] [MUIC] s2mu004_muic_control_vbus_det (Disable)
[ 0.673976] [6: swapper/0: 1] [MUIC] s2mu004_i2c_update_bit reg(0xd4) value(0x1f)
[ 0.675066] [6: swapper/0: 1] [MUIC] s2mu004_i2c_update_bit reg(0xd5) value(0x5c)
[ 0.676157] [6: swapper/0: 1] [MUIC] s2mu004_i2c_update_bit reg(0xd5) value(0x5c)
[ 0.676171] [6: swapper/0: 1] vbus_notifier_handle: (0)->(1)
[ 0.676183] [6: swapper/0: 1] vbus_notifier_notify: CMD=1, DATA=1
[ 0.676197] [6: swapper/0: 1] usb: [M] manager_handle_vbus_notification: cmd=1, vbus_type=LOW, WATER DET=0 ATTACH=DETATCH (0)
[ 0.676206] [6: swapper/0: 1] vbus_notifier_notify: notify done(0x0)
[ 0.676216] [6: swapper/0: 1] [MUIC_HV] s2mu004_hv_muic_initialize
[ 0.679299] [6: swapper/0: 1] [MUIC_HV] s2mu004_hv_muic_write_reg reg[0x4b] = [0x00] + [0x00] -> [0x00]
[ 0.681011] [6: swapper/0: 1] [MUIC_HV] s2mu004_hv_muic_write_reg reg[0x49] = [0x00] + [0x00] -> [0x00]
[ 0.682722] [6: swapper/0: 1] [MUIC_HV] s2mu004_hv_muic_write_reg reg[0x4a] = [0x00] + [0x00] -> [0x00]
[ 0.684437] [6: swapper/0: 1] [MUIC_HV] s2mu004_hv_muic_write_reg reg[0x5f] = [0x01] + [0x01] -> [0x01]
[ 0.684450] [6: swapper/0: 1] [MUIC] AFC mode enabled
[ 0.702864] [6: swapper/0: 1] [MUIC] s2mu004_muic_irq_init muic-attach(181), muic-detach(182), muic-rid_chg(186), muic-vbus_on(187)
[ 0.702877] [6: swapper/0: 1] [MUIC] muic-rsvd_attach(188), muic-adc_change(189), muic-av_charge(193), muic-vbus_off(194)
[ 0.702887] [6: swapper/0: 1] [MUIC_HV] s2mu004_afc_muic_irq_init
[ 0.712089] [6: swapper/0: 1] [MUIC_HV] mrxrdy(0), mpnack(180), vbadc(173), vdnmon(174)
[ 0.712728] [6: swapper/0: 1] [MUIC] s2mu004_muic_set_ctrl_reg 0x12 != 0x13, update
[ 0.714441] [6: swapper/0: 1] [MUIC] s2mu004_muic_set_ctrl_reg after change(0x12)
[ 0.714455] [6: swapper/0: 1] [MUIC] -1 S2MU004_NONE_CABLE start
[ 0.715092] [6: swapper/0: 1] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 0.715731] [6: swapper/0: 1] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 0, irq_num : -159
[ 0.715743] [6: swapper/0: 1] [MUIC] s2mu004_muic_irq_thread attach_mode : 0, irq_num: -159
[ 0.738779] [6: swapper/0: 1] [MUIC] dev[1:0x80, 2:0x00, 3:0x00]
[ 0.738792] [6: swapper/0: 1] [MUIC] adc:0x00, vbvolt:0x00, apple:0x04
[ 0.738803] [6: swapper/0: 1] [MUIC] chg_type:0x00, vmid:0x01, dev_id:0x38
[ 0.738815] [6: swapper/0: 1] [MUIC] s2mu004_muic_detect_with_ccic change mode to first attach!
[ 0.738826] [6: swapper/0: 1] [MUIC] muic_pdic_notifier_attach_attached_dev: (52)
[ 0.738836] [6: swapper/0: 1] [MUIC] muic_ccic_notifier_notify: CMD=4, DATA=52
[ 0.738846] [6: swapper/0: 1] [MUIC] muic_ccic_notifier_notify: notify done(0x0)
[ 0.738859] [6: swapper/0: 1] [MUIC] ATTACHED_DEV_UNKNOWN_MUIC S2MU004_FIRST_ATTACH done
[ 0.739490] [6: swapper/0: 1] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 0.739501] [6: swapper/0: 1] [MUIC] s2mu004_muic_set_rid_adc_en rid en : (0)
[ 0.740596] [6: swapper/0: 1] [MUIC] s2mu004_i2c_update_bit reg(0xcc) value(0x1f)
[ 0.741249] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt1(0x00)
[ 0.741901] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt2(0x00)
[ 0.742550] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: AFC interrupt(0x00)
[ 0.743197] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: 0x48 (0x00)
[ 0.744616] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: muic interrupt(0x02, 0x04)
[ 0.744640] [0:irq/131-s2mu004: 1241] [MUIC] muic-detach S2MU004_FIRST_ATTACH start
[ 0.745290] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 0.745940] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x1f, vbvolt : 0, irq_num : 24
[ 0.745961] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 3, irq_num: 24
[ 0.752639] [6: swapper/0: 1] [MUIC] s2mu004_muic_set_rid_adc_en rid en : (1)
[ 0.753735] [6: swapper/0: 1] [MUIC] s2mu004_i2c_update_bit reg(0xcc) value(0x1d)
[ 0.769043] [0:irq/131-s2mu004: 1241] [MUIC] dev[1:0x00, 2:0x00, 3:0x00]
[ 0.769063] [0:irq/131-s2mu004: 1241] [MUIC] adc:0x1f, vbvolt:0x00, apple:0x04
[ 0.769082] [0:irq/131-s2mu004: 1241] [MUIC] chg_type:0x00, vmid:0x01, dev_id:0x38
[ 0.769101] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_control_rid_adc (Enable)
[ 0.856246] [6: swapper/0: 1] [MUIC] s2mu004_muic_probe : init adc : 0x0
[ 0.856804] [6: swapper/0: 1] __sec_nfc_probe : start
[ 0.856839] [6: swapper/0: 1] sec_nfc_parse_dt: irq : 14, firm : 114
[ 0.857012] [6: swapper/0: 1] __sec_nfc_probe : success
[ 0.857020] [6: swapper/0: 1] sec_nfc_i2c_probe : start
[ 0.857033] [6: swapper/0: 1] sec_nfc_i2c_probe: push interrupt no = 195
[ 0.857179] [0:irq/195-sec-nfc: 1254] sec-nfc 7-0027: [NFC] Warning,irq-gpio state is low!
[ 0.857189] [7: swapper/0: 1] sec_nfc_i2c_probe , pvdd en: 1
[ 0.857255] [7: swapper/0: 1] [ESE-P3] : Entry : spip3_dev_init
[ 0.857450] [7: swapper/0: 1] [ESE-P3] : spip3_probe chip select : 0 , bus number = 0
[ 0.857468] [7: swapper/0: 1] [ESE-P3] : cs-gpio : 98
[ 0.857468] [7: swapper/0: 1] :
[ 0.857481] [7: swapper/0: 1] [ESE-P3] : p3_parse_dt - getting vdd_1p8 error
[ 0.857496] [7: swapper/0: 1] [ESE-P3] : p3_parse_dt success vdd-gpio:110
[ 0.857519] [7: swapper/0: 1] [ESE-P3] : p3_ldo_onoff: use external LDO 1
[ 0.871790] [6: swapper/0: 1] [ESE-P3] : p3_ldo_onoff: use external LDO 0
[ 0.872282] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_detect_first_attach : check adc at detach (0)
[ 0.872301] [0:irq/131-s2mu004: 1241] [MUIC] muic_pdic_notifier_attach_attached_dev: (52)
[ 0.872322] [0:irq/131-s2mu004: 1241] [MUIC] muic_ccic_notifier_notify: CMD=4, DATA=52
[ 0.872341] [0:irq/131-s2mu004: 1241] [MUIC] muic_ccic_notifier_notify: notify done(0x0)
[ 0.872362] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_get_ccic_cable_state call, attached_dev : 70
[ 0.872383] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_if_com_to_open
[ 0.872400] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_com_to_open
[ 0.873700] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_set_com_sw MANSW reg(0x0), just pass
[ 0.873720] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_handle_detach UNKNOWN
[ 0.873740] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_detach_charger
[ 0.873758] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_detach_attached_dev: (0)
[ 0.873778] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_detach_attached_dev: attached_dev of muic_notifier(70) != muic_data(0)
[ 0.873797] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_notify: CMD=0, DATA=70
[ 0.873817] [0:irq/131-s2mu004: 1241] usb: [M] manager_handle_muic_notification: attach:0, cable_type:70
[ 0.873837] [0:irq/131-s2mu004: 1241] usb: [M] manager_handle_muic_notification: Cable(70) Detached
[ 0.873863] [0:irq/131-s2mu004: 1241] usb: [M] manager_notifier_notify: src:MUIC dest:BATTERY id:ID_ATTACH sub1:00 sub2:00 sub3:46
[ 0.873885] [0:irq/131-s2mu004: 1241] usb: [M] manager_notifier_notify: notify done(0x0)
[ 0.873906] [0:irq/131-s2mu004: 1241] [MUIC] muic_handle_dock_notification: ignore(70)
[ 0.873925] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_notify: notify done(0x0)
[ 0.873944] [0:irq/131-s2mu004: 1241] [MUIC] update_jig_state jig_state : 0
[ 0.873962] [0:irq/131-s2mu004: 1241] [MUIC] muic_jig_uart_cb: MUIC uart type(0)
[ 0.873982] [0:irq/131-s2mu004: 1241] vbus_notifier_handle: (1)->(1)
[ 0.874003] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_FIRST_ATTACH done
[ 0.874023] [0:irq/131-s2mu004: 1241] [MUIC] muic-adc_change S2MU004_FIRST_ATTACH start
[ 0.874682] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 0.875340] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 0, irq_num : 31
[ 0.875362] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 1, irq_num: 31
[ 0.875381] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_FIRST_ATTACH done
[ 0.876067] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt1(0x00)
[ 0.876722] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt2(0x00)
[ 0.877377] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: AFC interrupt(0x00)
[ 0.878031] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: 0x48 (0x00)
[ 0.879462] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: muic interrupt(0x01, 0x04)
[ 0.879486] [0:irq/131-s2mu004: 1241] [MUIC] muic-attach S2MU004_FIRST_ATTACH start
[ 0.880146] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 0.880801] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 0, irq_num : 23
[ 0.880820] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 1, irq_num: 23
[ 0.880839] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_FIRST_ATTACH done
[ 0.880856] [0:irq/131-s2mu004: 1241] [MUIC] muic-adc_change S2MU004_FIRST_ATTACH start
[ 0.881510] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 0.882166] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 0, irq_num : 31
[ 0.882187] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 1, irq_num: 31
[ 0.882204] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_FIRST_ATTACH done
[ 0.887635] [6: swapper/0: 1] [ESE-P3] : spip3_probe finished...
[ 0.887784] [6: swapper/0: 1] tun: Universal TUN/TAP device driver, 1.6
[ 0.887794] [6: swapper/0: 1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.887930] [6: swapper/0: 1] PPP generic driver version 2.4.2
[ 0.888096] [6: swapper/0: 1] PPP BSD Compression module registered
[ 0.888108] [6: swapper/0: 1] PPP Deflate Compression module registered
[ 0.888130] [6: swapper/0: 1] PPP MPPE Compression module registered
[ 0.888142] [6: swapper/0: 1] NET: Registered protocol family 24
[ 0.888161] [6: swapper/0: 1] slsi_dev_load: Loading Maxwell Wi-Fi driver
[ 0.888201] [6: swapper/0: 1] slsi_wlan_service_probe: WLAN service probe
[ 0.893155] [6: swapper/0: 1] sap_mlme_init: Registering SAP
[ 0.893173] [6: swapper/0: 1] sap_ma_init: Registering SAP
[ 0.893186] [6: swapper/0: 1] sap_dbg_init: Registering SAP
[ 0.893197] [6: swapper/0: 1] sap_test_init: Registering SAP
[ 0.893210] [6: swapper/0: 1] slsi_dev_load: --- Maxwell Wi-Fi driver loaded successfully ---
[ 0.893274] [6: swapper/0: 1] usbcore: registered new interface driver rtl8150
[ 0.893308] [6: swapper/0: 1] usbcore: registered new interface driver r8152
[ 0.893343] [6: swapper/0: 1] usbcore: registered new interface driver asix
[ 0.893374] [6: swapper/0: 1] usbcore: registered new interface driver ax88179_178a
[ 0.893406] [6: swapper/0: 1] usbcore: registered new interface driver cdc_ether
[ 0.893438] [6: swapper/0: 1] usbcore: registered new interface driver cdc_eem
[ 0.893468] [6: swapper/0: 1] usbcore: registered new interface driver smsc75xx
[ 0.893498] [6: swapper/0: 1] usbcore: registered new interface driver smsc95xx
[ 0.893534] [6: swapper/0: 1] usbcore: registered new interface driver net1080
[ 0.893566] [6: swapper/0: 1] usbcore: registered new interface driver cdc_subset
[ 0.893599] [6: swapper/0: 1] usbcore: registered new interface driver zaurus
[ 0.893654] [6: swapper/0: 1] usbcore: registered new interface driver cdc_ncm
[ 0.893684] [6: swapper/0: 1] usbcore: registered new interface driver cdc_mbim
[ 0.894085] [6: swapper/0: 1] dwc3_exynos_probe: +++
[ 0.894426] [6: swapper/0: 1] 13600000.usb supply vdd33 not found, using dummy regulator
[ 0.894487] [6: swapper/0: 1] 13600000.usb supply vdd10 not found, using dummy regulator
[ 0.894777] [6: swapper/0: 1] dwc3_probe: +++
[ 0.894825] [6: swapper/0: 1] dwc3 13600000.dwc3: get qos_int_level from dwc3 node
[ 0.894851] [6: swapper/0: 1] dwc3 13600000.dwc3: dwc3_probe: dr_mode:3, suspend clock:0MHz
[ 0.895206] [6: swapper/0: 1] exynos_usbdrd_utmi_init: +++
[ 0.896944] [6: swapper/0: 1] exynos_usbdrd_utmi_init: ---
[ 0.897003] [6: swapper/0: 1] dwc3 13600000.dwc3: dwc3_core_init: max speed:3, hibernation:0, nr_scratch:0
[ 0.897048] [6: swapper/0: 1] 13600000.usb supply dwc3-vbus not found, using dummy regulator
[ 0.897838] [6: swapper/0: 1] dwc3 13600000.dwc3: Binding gadget dwc3-gadget
[ 0.897902] [6: swapper/0: 1] dwc3_probe: ---
[ 0.897930] [6: kworker/6:1: 1084] exynos-dwc3 13600000.usb: dwc3_exynos_runtime_suspend
[ 0.897959] [6: swapper/0: 1] dwc3_exynos_probe: ---
[ 0.898404] [6: swapper/0: 1] usbcore: registered new interface driver cdc_acm
[ 0.898414] [6: swapper/0: 1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.898450] [6: swapper/0: 1] usbcore: registered new interface driver usblp
[ 0.898486] [6: swapper/0: 1] usbcore: registered new interface driver cdc_wdm
[ 0.898522] [6: swapper/0: 1] usbcore: registered new interface driver usb-storage
[ 0.898584] [6: swapper/0: 1] usbcore: registered new interface driver usbserial
[ 0.898613] [6: swapper/0: 1] usbcore: registered new interface driver ftdi_sio
[ 0.898649] [6: swapper/0: 1] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 0.898679] [6: swapper/0: 1] usbcore: registered new interface driver pl2303
[ 0.898707] [6: swapper/0: 1] usbserial: USB Serial support registered for pl2303
[ 0.899126] [6: swapper/0: 1] usb_notify: external_notifier_init
[ 0.899137] [6: swapper/0: 1] usb_notify: create_external_notify
[ 0.899358] [6: swapper/0: 1] mousedev: PS/2 mouse device common for all mice
[ 0.899742] [6: swapper/0: 1] [sec_input] touchkey_init: abov,a96t3x6
[ 0.899948] [6: swapper/0: 1] abov_tk_probe++
[ 0.899971] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] unable to get gpio_rst
[ 0.900017] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_parse_dt: [GPIO] en:123, int:29, scl:94, sda:93, vdd_io:0
[ 0.900017] [6: swapper/0: 1] bringup:0, firmupcmd:32, abov_parse_dt: fw_name: abov/a96t326_a5y18.fw
[ 0.900116] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_pinctrl_configure ACTIVE
[ 0.900161] [6: swapper/0: 1] 10-0020 supply vddo not found, using dummy regulator
[ 0.900213] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] [TKEY] abov_power: iovdd reg enable OK
[ 0.900227] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] [TKEY] abov_power: on
[ 0.900243] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] vdd_en:1
[ 0.900257] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] vio_reg:1
[ 0.900270] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_power [TKEY] [sec_input] VDD get regulator
[ 0.900293] [6: swapper/0: 1] 10-0020 supply abov,lvdd not found, using dummy regulator
[ 0.900329] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_power [TKEY] [sec_input] Regulator already enabled
[ 1.056192] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] get_tk_fw_version : fw = 0x8, md = 0x61
[ 1.056213] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_load_fw_kernel : fw = 0x8, md = 0x61
[ 1.056228] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_load_fw_kernel : crc 0x78 0x1c
[ 1.056241] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] fw version read success (0)
[ 1.056396] [6: swapper/0: 1] input: sec_touchkey as /devices/platform/13880000.i2c/i2c-10/10-0020/input/input0
[ 1.056576] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] no irq_flag
[ 1.056850] [6: swapper/0: 1] vbus_notifier_register: listener=1 register
[ 1.056867] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_touchkey_vbus_notification cmd=1, vbus_type=1
[ 1.056883] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_touchkey_vbus_notification : detach
[ 1.056898] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_set_ta_status ta_connected 0
[ 1.057336] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_tk_probe done
[ 1.057440] [6: swapper/0: 1] usbcore: registered new interface driver xpad
[ 1.057480] [6: swapper/0: 1] usbcore: registered new interface driver usb_acecad
[ 1.057513] [6: swapper/0: 1] usbcore: registered new interface driver aiptek
[ 1.057546] [6: swapper/0: 1] usbcore: registered new interface driver gtco
[ 1.057580] [6: swapper/0: 1] usbcore: registered new interface driver hanwang
[ 1.057613] [6: swapper/0: 1] usbcore: registered new interface driver kbtab
[ 1.057625] [6: swapper/0: 1] [sec_input] sec_ts_init
[ 1.057766] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe
[ 1.057784] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: Failed to get tsp-icid gpio
[ 1.057854] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: TSP_ID : 0
[ 1.057879] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: lcdtype 0x00810543
[ 1.057895] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: use tsp_ldo_en
[ 1.057912] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: Failed to get pressure-sensor property
[ 1.057934] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: i2c buffer limit: 256, lcd_id:810543, bringup:3, FW:tsp_sec/y661_a5y18.fw(2), id:132,-2, mis_cal:1 dex:0, gesture:0 pressure:(null)
[ 1.057953] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_tclm_parse_dt: tclm_level 2, sec_afe_base 261
[ 1.058014] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: init resource
[ 1.058029] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_pinctrl_configure: ACTIVE
[ 1.058084] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_power: on: avdd:on
[ 1.058536] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_wait_for_ready: 09, 00, 10, 00, 00, 00, 00, 00 [0]
[ 1.058549] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: power enable
[ 1.058841] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: TOUCH DEVICE ID : 53, 45, B6, 61, 00
[ 1.084116] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: TOUCH STATUS : 20 || 00, 03, 00, 00
[ 1.084385] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_calibration_report: count:14, pass count:14, fail count:0, status:0xA2
[ 1.084400] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_firmware_update_on_probe: initial firmware update tsp_sec/y661_a5y18.fw, cal:A2
[ 1.084417] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_firmware_update_on_probe: request firmware done! size = 137724
[ 1.084432] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_bin: img_ver of bin = 9.38.1.9
[ 1.084445] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_bin: core_ver of bin = 9.38.2.2
[ 1.084458] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_bin: config_ver of bin = 9.38.1.3
[ 1.084876] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_ic: IC Image version info : 9.38.1.9
[ 1.085144] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_ic: IC Core version info : 9.38.2.2,
[ 1.085412] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_ic: IC config version info : 9.38.1.3
[ 1.085428] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_firmware_update_on_probe: skip - fw update
[ 1.085666] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_information: AC, B6, 61
[ 1.086151] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_information: nTX:F, nRX:1E, rY:4096, rX:4096
[ 1.086318] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_information: STATUS : 20
[ 1.086584] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_information: TOUCH STATUS : 00, 03, 00, 00
[ 1.086786] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_information: Functions : 61
[ 1.087171] [6: swapper/0: 1] input: sec_touchscreen as /devices/platform/13870000.i2c/i2c-9/9-0048/input/input1
[ 1.087468] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: request_irq = 198
[ 1.087613] [6: swapper/0: 1] trustedui_set_tsp_irq called![198]
[ 1.087624] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe[198] called!
[ 1.088038] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 3 0 0 0
[ 1.088500] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_check_custom_library: (2) A530, || 00, 04, 00, 05, || 10, 01
[ 1.088515] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_check_custom_library: use SPONGE
[ 1.088528] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_set_custom_library: Sponge (0x00)
[ 1.088810] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: done
[ 1.091369] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: s2m_rtc_enable_wtsr_smpl: WTSR: enable, SMPL: enable
[ 1.093553] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: s2m_rtc_read_time: 2017-01-28 08:26:32(0x40)AM
[ 1.094855] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: s2m_rtc_read_alarm: 2016-12-31 21:03:17(6)
[ 1.096222] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: s2m_rtc_read_time: 2017-01-28 08:26:32(0x40)AM
[ 1.096362] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: rtc core: registered s2mp-rtc as rtc0
[ 1.096745] [7: swapper/0: 1] i2c /dev entries driver
[ 1.099038] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: registered as m2m1shot2 device
[ 1.099073] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: G2D version : 0x06110000
[ 1.099099] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Fault handler is registered for 12c50000.sysmmu
[ 1.099196] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[0] c1 : 0 c0 : 0 mif :1014000
[ 1.099209] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[1] c1 : 0 c0 : 0 mif :1014000
[ 1.099221] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[2] c1 : 0 c0 : 0 mif :845000
[ 1.099233] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[3] c1 : 0 c0 : 0 mif :845000
[ 1.099244] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[4] c1 : 0 c0 : 0 mif :676000
[ 1.099256] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[5] c1 : 0 c0 : 0 mif :0
[ 1.099272] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: G2D with m2m1shot2 is probed successfully.
[ 1.099713] [6: swapper/0: 1] exynos5-scaler 12c10000.scaler: 'gate2' clock is not present
[ 1.099730] [6: swapper/0: 1] exynos5-scaler 12c10000.scaler: 'mux_user' clock is not present
[ 1.100206] [6: swapper/0: 1] exynos5-scaler 12c10000.scaler: Fault handler is registered for 12c50000.sysmmu
[ 1.100224] [6: swapper/0: 1] exynos5-scaler 12c10000.scaler: Driver probed successfully(version: 80044001(40002))
[ 1.100983] [6: swapper/0: 1] s5p-mfc 12c30000.mfc0: decoder registered as /dev/video6
[ 1.101086] [6: swapper/0: 1] s5p-mfc 12c30000.mfc0: encoder registered as /dev/video7
[ 1.101179] [6: swapper/0: 1] s5p-mfc 12c30000.mfc0: secure decoder registered as /dev/video8
[ 1.101262] [6: swapper/0: 1] s5p-mfc 12c30000.mfc0: secure encoder registered as /dev/video9
[ 1.101514] [6: swapper/0: 1] s5p_mfc_probe:1229: QoS table[0] int : 267000, mif : 420000
[ 1.101526] [6: swapper/0: 1] s5p_mfc_probe:1229: QoS table[1] int : 333000, mif : 546000
[ 1.101536] [6: swapper/0: 1] s5p_mfc_probe:1229: QoS table[2] int : 533000, mif : 1352000
[ 1.101553] [6: swapper/0: 1] s5p-mfc 12c30000.mfc0: Fault handler is registered for 12c50000.sysmmu
[ 1.102210] [6: swapper/0: 1] exynos-jpeg 12c00000.smfc: device ID is not declared: unique device
[ 1.102228] [6: swapper/0: 1] exynos-jpeg 12c00000.smfc: INT Min.Lock Freq. = 534000
[ 1.102409] [5: swapper/0: 1] exynos-jpeg 12c00000.smfc: Fault handler is registered for 12c50000.sysmmu
[ 1.102713] [5: swapper/0: 1] exynos-jpeg 12c00000.smfc: Probed H/W Version: 23.02.2015
[ 1.103735] [7: swapper/0: 1] fimc_is_probe:start(267224, 13592)
[ 1.103838] [7: swapper/0: 1] parse_gate_info: can't find fimc_is clk_gate_ctrl node
[ 1.103850] [7: swapper/0: 1] [ERR]fimc_is_parse_dt:252:can't parse clock gate info node
[ 1.103860] [7: swapper/0: 1] FIMC-IS chain configuration: 0
[ 1.103876] [7: swapper/0: 1] [ERR]fimc_is_vender_dt:384:rear_second_sensor_id read is fail(-22)
[ 1.103886] [7: swapper/0: 1] skip_cal_loading not use(0)
[ 1.103895] [7: swapper/0: 1] [ERR]fimc_is_vender_dt:428:f_rom_power read is fail(-22)
[ 1.103904] [7: swapper/0: 1] f_rom_power not use(0)
[ 1.103917] [7: swapper/0: 1] fw_write: no property in the node.
[ 1.103924] [7: swapper/0: 1] fw_dump: no property in the node.
[ 1.103936] [7: swapper/0: 1] fw_write: no property in the node.
[ 1.103943] [7: swapper/0: 1] fw_dump: no property in the node.
[ 1.103959] [7: swapper/0: 1] [@]fimc_is_vender_dt: camera_num = 2 can't find camInfo_string node
[ 1.103971] [7: swapper/0: 1] [@]fimc_is_vender_dt: camera_num = 3 can't find camInfo_string node
[ 1.103983] [7: swapper/0: 1] [@]fimc_is_vender_dt: camera_num = 4 can't find camInfo_string node
[ 1.103996] [7: swapper/0: 1] fw_write: no property in the node.
[ 1.104006] [7: swapper/0: 1] fw_dump: no property in the node.
[ 1.104046] [7: swapper/0: 1] dvfs table[0] is default
[ 1.104062] [7: swapper/0: 1] default_hpg: no property in the node.
[ 1.104072] [7: swapper/0: 1] secure_front_int: no property in the node.
[ 1.104084] [7: swapper/0: 1] secure_front_cam: no property in the node.
[ 1.104095] [7: swapper/0: 1] secure_front_mif: no property in the node.
[ 1.104106] [7: swapper/0: 1] secure_front_i2c: no property in the node.
[ 1.104117] [7: swapper/0: 1] secure_front_hpg: no property in the node.
[ 1.104130] [7: swapper/0: 1] front2_preview_hpg: no property in the node.
[ 1.104143] [7: swapper/0: 1] front2_capture_hpg: no property in the node.
[ 1.104158] [7: swapper/0: 1] front2_video_hpg: no property in the node.
[ 1.104174] [7: swapper/0: 1] front2_video_capture_hpg: no property in the node.
[ 1.104190] [7: swapper/0: 1] front_preview_hpg: no property in the node.
[ 1.104205] [7: swapper/0: 1] front_capture_hpg: no property in the node.
[ 1.104224] [7: swapper/0: 1] front_video_hpg: no property in the node.
[ 1.104234] [7: swapper/0: 1] front_video_whd_int: no property in the node.
[ 1.104244] [7: swapper/0: 1] front_video_whd_cam: no property in the node.
[ 1.104254] [7: swapper/0: 1] front_video_whd_mif: no property in the node.
[ 1.104263] [7: swapper/0: 1] front_video_whd_i2c: no property in the node.
[ 1.104273] [7: swapper/0: 1] front_video_whd_hpg: no property in the node.
[ 1.104282] [7: swapper/0: 1] front_video_capture_int: no property in the node.
[ 1.104292] [7: swapper/0: 1] front_video_capture_cam: no property in the node.
[ 1.104301] [7: swapper/0: 1] front_video_capture_mif: no property in the node.
[ 1.104311] [7: swapper/0: 1] front_video_capture_i2c: no property in the node.
[ 1.104321] [7: swapper/0: 1] front_video_capture_hpg: no property in the node.
[ 1.104332] [7: swapper/0: 1] front_video_whd_capture_int: no property in the node.
[ 1.104341] [7: swapper/0: 1] front_video_whd_capture_cam: no property in the node.
[ 1.104351] [7: swapper/0: 1] front_video_whd_capture_mif: no property in the node.
[ 1.104360] [7: swapper/0: 1] front_video_whd_capture_i2c: no property in the node.
[ 1.104369] [7: swapper/0: 1] front_video_whd_capture_hpg: no property in the node.
[ 1.104386] [7: swapper/0: 1] front_vt1_hpg: no property in the node.
[ 1.104402] [7: swapper/0: 1] front_vt2_hpg: no property in the node.
[ 1.104420] [7: swapper/0: 1] front_vt4_hpg: no property in the node.
[ 1.104429] [7: swapper/0: 1] rear2_preview_fhd_int: no property in the node.
[ 1.104438] [7: swapper/0: 1] rear2_preview_fhd_cam: no property in the node.
[ 1.104447] [7: swapper/0: 1] rear2_preview_fhd_mif: no property in the node.
[ 1.104456] [7: swapper/0: 1] rear2_preview_fhd_i2c: no property in the node.
[ 1.104465] [7: swapper/0: 1] rear2_preview_fhd_hpg: no property in the node.
[ 1.104476] [7: swapper/0: 1] rear2_capture_int: no property in the node.
[ 1.104486] [7: swapper/0: 1] rear2_capture_cam: no property in the node.
[ 1.104496] [7: swapper/0: 1] rear2_capture_mif: no property in the node.
[ 1.104507] [7: swapper/0: 1] rear2_capture_i2c: no property in the node.
[ 1.104517] [7: swapper/0: 1] rear2_capture_hpg: no property in the node.
[ 1.104527] [7: swapper/0: 1] rear2_video_fhd_int: no property in the node.
[ 1.104535] [7: swapper/0: 1] rear2_video_fhd_cam: no property in the node.
[ 1.104544] [7: swapper/0: 1] rear2_video_fhd_mif: no property in the node.
[ 1.104553] [7: swapper/0: 1] rear2_video_fhd_i2c: no property in the node.
[ 1.104563] [7: swapper/0: 1] rear2_video_fhd_hpg: no property in the node.
[ 1.104572] [7: swapper/0: 1] rear2_video_fhd_capture_int: no property in the node.
[ 1.104581] [7: swapper/0: 1] rear2_video_fhd_capture_cam: no property in the node.
[ 1.104589] [7: swapper/0: 1] rear2_video_fhd_capture_mif: no property in the node.
[ 1.104599] [7: swapper/0: 1] rear2_video_fhd_capture_i2c: no property in the node.
[ 1.104608] [7: swapper/0: 1] rear2_video_fhd_capture_hpg: no property in the node.
[ 1.104623] [7: swapper/0: 1] rear_preview_fhd_hpg: no property in the node.
[ 1.104634] [7: swapper/0: 1] rear_preview_whd_int: no property in the node.
[ 1.104645] [7: swapper/0: 1] rear_preview_whd_cam: no property in the node.
[ 1.104655] [7: swapper/0: 1] rear_preview_whd_mif: no property in the node.
[ 1.104665] [7: swapper/0: 1] rear_preview_whd_i2c: no property in the node.
[ 1.104674] [7: swapper/0: 1] rear_preview_whd_hpg: no property in the node.
[ 1.104684] [7: swapper/0: 1] rear_preview_uhd_int: no property in the node.
[ 1.104693] [7: swapper/0: 1] rear_preview_uhd_cam: no property in the node.
[ 1.104702] [7: swapper/0: 1] rear_preview_uhd_mif: no property in the node.
[ 1.104711] [7: swapper/0: 1] rear_preview_uhd_i2c: no property in the node.
[ 1.104720] [7: swapper/0: 1] rear_preview_uhd_hpg: no property in the node.
[ 1.104730] [7: swapper/0: 1] rear_preview_uhd_60fps_int: no property in the node.
[ 1.104739] [7: swapper/0: 1] rear_preview_uhd_60fps_cam: no property in the node.
[ 1.104748] [7: swapper/0: 1] rear_preview_uhd_60fps_mif: no property in the node.
[ 1.104758] [7: swapper/0: 1] rear_preview_uhd_60fps_i2c: no property in the node.
[ 1.104768] [7: swapper/0: 1] rear_preview_uhd_60fps_hpg: no property in the node.
[ 1.104783] [7: swapper/0: 1] rear_capture_hpg: no property in the node.
[ 1.104798] [7: swapper/0: 1] rear_video_fhd_hpg: no property in the node.
[ 1.104808] [7: swapper/0: 1] rear_video_whd_int: no property in the node.
[ 1.104818] [7: swapper/0: 1] rear_video_whd_cam: no property in the node.
[ 1.104828] [7: swapper/0: 1] rear_video_whd_mif: no property in the node.
[ 1.104837] [7: swapper/0: 1] rear_video_whd_i2c: no property in the node.
[ 1.104847] [7: swapper/0: 1] rear_video_whd_hpg: no property in the node.
[ 1.104862] [7: swapper/0: 1] rear_video_uhd_hpg: no property in the node.
[ 1.104871] [7: swapper/0: 1] rear_video_uhd_60fps_int: no property in the node.
[ 1.104880] [7: swapper/0: 1] rear_video_uhd_60fps_cam: no property in the node.
[ 1.104890] [7: swapper/0: 1] rear_video_uhd_60fps_mif: no property in the node.
[ 1.104900] [7: swapper/0: 1] rear_video_uhd_60fps_i2c: no property in the node.
[ 1.104909] [7: swapper/0: 1] rear_video_uhd_60fps_hpg: no property in the node.
[ 1.104928] [7: swapper/0: 1] rear_video_fhd_capture_hpg: no property in the node.
[ 1.104937] [7: swapper/0: 1] rear_video_whd_capture_int: no property in the node.
[ 1.104947] [7: swapper/0: 1] rear_video_whd_capture_cam: no property in the node.
[ 1.104956] [7: swapper/0: 1] rear_video_whd_capture_mif: no property in the node.
[ 1.104965] [7: swapper/0: 1] rear_video_whd_capture_i2c: no property in the node.
[ 1.104974] [7: swapper/0: 1] rear_video_whd_capture_hpg: no property in the node.
[ 1.104991] [7: swapper/0: 1] rear_video_uhd_capture_hpg: no property in the node.
[ 1.105007] [7: swapper/0: 1] dual_preview_hpg: no property in the node.
[ 1.105022] [7: swapper/0: 1] dual_capture_hpg: no property in the node.
[ 1.105038] [7: swapper/0: 1] dual_video_hpg: no property in the node.
[ 1.105048] [7: swapper/0: 1] dual_video_capture_int: no property in the node.
[ 1.105059] [7: swapper/0: 1] dual_video_capture_cam: no property in the node.
[ 1.105069] [7: swapper/0: 1] dual_video_capture_mif: no property in the node.
[ 1.105078] [7: swapper/0: 1] dual_video_capture_i2c: no property in the node.
[ 1.105088] [7: swapper/0: 1] dual_video_capture_hpg: no property in the node.
[ 1.105098] [7: swapper/0: 1] pip_preview_int: no property in the node.
[ 1.105107] [7: swapper/0: 1] pip_preview_cam: no property in the node.
[ 1.105117] [7: swapper/0: 1] pip_preview_mif: no property in the node.
[ 1.105126] [7: swapper/0: 1] pip_preview_i2c: no property in the node.
[ 1.105135] [7: swapper/0: 1] pip_preview_hpg: no property in the node.
[ 1.105145] [7: swapper/0: 1] pip_capture_int: no property in the node.
[ 1.105154] [7: swapper/0: 1] pip_capture_cam: no property in the node.
[ 1.105163] [7: swapper/0: 1] pip_capture_mif: no property in the node.
[ 1.105172] [7: swapper/0: 1] pip_capture_i2c: no property in the node.
[ 1.105182] [7: swapper/0: 1] pip_capture_hpg: no property in the node.
[ 1.105191] [7: swapper/0: 1] pip_video_int: no property in the node.
[ 1.105200] [7: swapper/0: 1] pip_video_cam: no property in the node.
[ 1.105208] [7: swapper/0: 1] pip_video_mif: no property in the node.
[ 1.105217] [7: swapper/0: 1] pip_video_i2c: no property in the node.
[ 1.105227] [7: swapper/0: 1] pip_video_hpg: no property in the node.
[ 1.105236] [7: swapper/0: 1] pip_video_capture_int: no property in the node.
[ 1.105244] [7: swapper/0: 1] pip_video_capture_cam: no property in the node.
[ 1.105253] [7: swapper/0: 1] pip_video_capture_mif: no property in the node.
[ 1.105262] [7: swapper/0: 1] pip_video_capture_i2c: no property in the node.
[ 1.105271] [7: swapper/0: 1] pip_video_capture_hpg: no property in the node.
[ 1.105287] [7: swapper/0: 1] preview_high_speed_fps_hpg: no property in the node.
[ 1.105297] [7: swapper/0: 1] video_high_speed_60fps_swvdis_int: no property in the node.
[ 1.105309] [7: swapper/0: 1] video_high_speed_60fps_swvdis_cam: no property in the node.
[ 1.105318] [7: swapper/0: 1] video_high_speed_60fps_swvdis_mif: no property in the node.
[ 1.105328] [7: swapper/0: 1] video_high_speed_60fps_swvdis_i2c: no property in the node.
[ 1.105337] [7: swapper/0: 1] video_high_speed_60fps_swvdis_hpg: no property in the node.
[ 1.105354] [7: swapper/0: 1] video_high_speed_60fps_hpg: no property in the node.
[ 1.105372] [7: swapper/0: 1] video_high_speed_120fps_hpg: no property in the node.
[ 1.105384] [7: swapper/0: 1] video_high_speed_240fps_int: no property in the node.
[ 1.105394] [7: swapper/0: 1] video_high_speed_240fps_cam: no property in the node.
[ 1.105405] [7: swapper/0: 1] video_high_speed_240fps_mif: no property in the node.
[ 1.105415] [7: swapper/0: 1] video_high_speed_240fps_i2c: no property in the node.
[ 1.105424] [7: swapper/0: 1] video_high_speed_240fps_hpg: no property in the node.
[ 1.105434] [7: swapper/0: 1] ext_rear_int: no property in the node.
[ 1.105443] [7: swapper/0: 1] ext_rear_cam: no property in the node.
[ 1.105453] [7: swapper/0: 1] ext_rear_mif: no property in the node.
[ 1.105462] [7: swapper/0: 1] ext_rear_i2c: no property in the node.
[ 1.105471] [7: swapper/0: 1] ext_rear_hpg: no property in the node.
[ 1.105479] [7: swapper/0: 1] ext_front_int: no property in the node.
[ 1.105488] [7: swapper/0: 1] ext_front_cam: no property in the node.
[ 1.105497] [7: swapper/0: 1] ext_front_mif: no property in the node.
[ 1.105506] [7: swapper/0: 1] ext_front_i2c: no property in the node.
[ 1.105516] [7: swapper/0: 1] ext_front_hpg: no property in the node.
[ 1.105532] [7: swapper/0: 1] max_hpg: no property in the node.
[ 1.105543] [7: swapper/0: 1] (null)int: no property in the node.
[ 1.105552] [7: swapper/0: 1] (null)cam: no property in the node.
[ 1.105562] [7: swapper/0: 1] (null)mif: no property in the node.
[ 1.105571] [7: swapper/0: 1] (null)i2c: no property in the node.
[ 1.105580] [7: swapper/0: 1] (null)hpg: no property in the node.
[ 1.105587] [7: swapper/0: 1] dvfs table[1] is DVFS table for HAL3
[ 1.105599] [7: swapper/0: 1] default_hpg: no property in the node.
[ 1.105609] [7: swapper/0: 1] secure_front_int: no property in the node.
[ 1.105617] [7: swapper/0: 1] secure_front_cam: no property in the node.
[ 1.105628] [7: swapper/0: 1] secure_front_mif: no property in the node.
[ 1.105638] [7: swapper/0: 1] secure_front_i2c: no property in the node.
[ 1.105647] [7: swapper/0: 1] secure_front_hpg: no property in the node.
[ 1.105660] [7: swapper/0: 1] front2_preview_hpg: no property in the node.
[ 1.105675] [7: swapper/0: 1] front2_capture_hpg: no property in the node.
[ 1.105690] [7: swapper/0: 1] front2_video_hpg: no property in the node.
[ 1.105706] [7: swapper/0: 1] front2_video_capture_hpg: no property in the node.
[ 1.105721] [7: swapper/0: 1] front_preview_hpg: no property in the node.
[ 1.105734] [7: swapper/0: 1] front_capture_hpg: no property in the node.
[ 1.105748] [7: swapper/0: 1] front_video_hpg: no property in the node.
[ 1.105759] [7: swapper/0: 1] front_video_whd_int: no property in the node.
[ 1.105768] [7: swapper/0: 1] front_video_whd_cam: no property in the node.
[ 1.105778] [7: swapper/0: 1] front_video_whd_mif: no property in the node.
[ 1.105787] [7: swapper/0: 1] front_video_whd_i2c: no property in the node.
[ 1.105797] [7: swapper/0: 1] front_video_whd_hpg: no property in the node.
[ 1.105806] [7: swapper/0: 1] front_video_capture_int: no property in the node.
[ 1.105815] [7: swapper/0: 1] front_video_capture_cam: no property in the node.
[ 1.105824] [7: swapper/0: 1] front_video_capture_mif: no property in the node.
[ 1.105834] [7: swapper/0: 1] front_video_capture_i2c: no property in the node.
[ 1.105844] [7: swapper/0: 1] front_video_capture_hpg: no property in the node.
[ 1.105855] [7: swapper/0: 1] front_video_whd_capture_int: no property in the node.
[ 1.105866] [7: swapper/0: 1] front_video_whd_capture_cam: no property in the node.
[ 1.105875] [7: swapper/0: 1] front_video_whd_capture_mif: no property in the node.
[ 1.105885] [7: swapper/0: 1] front_video_whd_capture_i2c: no property in the node.
[ 1.105895] [7: swapper/0: 1] front_video_whd_capture_hpg: no property in the node.
[ 1.105911] [7: swapper/0: 1] front_vt1_hpg: no property in the node.
[ 1.105928] [7: swapper/0: 1] front_vt2_hpg: no property in the node.
[ 1.105944] [7: swapper/0: 1] front_vt4_hpg: no property in the node.
[ 1.105954] [7: swapper/0: 1] rear2_preview_fhd_int: no property in the node.
[ 1.105963] [7: swapper/0: 1] rear2_preview_fhd_cam: no property in the node.
[ 1.105974] [7: swapper/0: 1] rear2_preview_fhd_mif: no property in the node.
[ 1.105983] [7: swapper/0: 1] rear2_preview_fhd_i2c: no property in the node.
[ 1.105993] [7: swapper/0: 1] rear2_preview_fhd_hpg: no property in the node.
[ 1.106002] [7: swapper/0: 1] rear2_capture_int: no property in the node.
[ 1.106012] [7: swapper/0: 1] rear2_capture_cam: no property in the node.
[ 1.106021] [7: swapper/0: 1] rear2_capture_mif: no property in the node.
[ 1.106031] [7: swapper/0: 1] rear2_capture_i2c: no property in the node.
[ 1.106040] [7: swapper/0: 1] rear2_capture_hpg: no property in the node.
[ 1.106049] [7: swapper/0: 1] rear2_video_fhd_int: no property in the node.
[ 1.106059] [7: swapper/0: 1] rear2_video_fhd_cam: no property in the node.
[ 1.106068] [7: swapper/0: 1] rear2_video_fhd_mif: no property in the node.
[ 1.106077] [7: swapper/0: 1] rear2_video_fhd_i2c: no property in the node.
[ 1.106086] [7: swapper/0: 1] rear2_video_fhd_hpg: no property in the node.
[ 1.106096] [7: swapper/0: 1] rear2_video_fhd_capture_int: no property in the node.
[ 1.106105] [7: swapper/0: 1] rear2_video_fhd_capture_cam: no property in the node.
[ 1.106115] [7: swapper/0: 1] rear2_video_fhd_capture_mif: no property in the node.
[ 1.106124] [7: swapper/0: 1] rear2_video_fhd_capture_i2c: no property in the node.
[ 1.106133] [7: swapper/0: 1] rear2_video_fhd_capture_hpg: no property in the node.
[ 1.106147] [7: swapper/0: 1] rear_preview_fhd_hpg: no property in the node.
[ 1.106157] [7: swapper/0: 1] rear_preview_whd_int: no property in the node.
[ 1.106166] [7: swapper/0: 1] rear_preview_whd_cam: no property in the node.
[ 1.106175] [7: swapper/0: 1] rear_preview_whd_mif: no property in the node.
[ 1.106183] [7: swapper/0: 1] rear_preview_whd_i2c: no property in the node.
[ 1.106192] [7: swapper/0: 1] rear_preview_whd_hpg: no property in the node.
[ 1.106202] [7: swapper/0: 1] rear_preview_uhd_int: no property in the node.
[ 1.106210] [7: swapper/0: 1] rear_preview_uhd_cam: no property in the node.
[ 1.106219] [7: swapper/0: 1] rear_preview_uhd_mif: no property in the node.
[ 1.106229] [7: swapper/0: 1] rear_preview_uhd_i2c: no property in the node.
[ 1.106238] [7: swapper/0: 1] rear_preview_uhd_hpg: no property in the node.
[ 1.106248] [7: swapper/0: 1] rear_preview_uhd_60fps_int: no property in the node.
[ 1.106258] [7: swapper/0: 1] rear_preview_uhd_60fps_cam: no property in the node.
[ 1.106267] [7: swapper/0: 1] rear_preview_uhd_60fps_mif: no property in the node.
[ 1.106276] [7: swapper/0: 1] rear_preview_uhd_60fps_i2c: no property in the node.
[ 1.106285] [7: swapper/0: 1] rear_preview_uhd_60fps_hpg: no property in the node.
[ 1.106299] [7: swapper/0: 1] rear_capture_hpg: no property in the node.
[ 1.106315] [7: swapper/0: 1] rear_video_fhd_hpg: no property in the node.
[ 1.106324] [7: swapper/0: 1] rear_video_whd_int: no property in the node.
[ 1.106334] [7: swapper/0: 1] rear_video_whd_cam: no property in the node.
[ 1.106344] [7: swapper/0: 1] rear_video_whd_mif: no property in the node.
[ 1.106353] [7: swapper/0: 1] rear_video_whd_i2c: no property in the node.
[ 1.106362] [7: swapper/0: 1] rear_video_whd_hpg: no property in the node.
[ 1.106377] [7: swapper/0: 1] rear_video_uhd_hpg: no property in the node.
[ 1.106387] [7: swapper/0: 1] rear_video_uhd_60fps_int: no property in the node.
[ 1.106397] [7: swapper/0: 1] rear_video_uhd_60fps_cam: no property in the node.
[ 1.106406] [7: swapper/0: 1] rear_video_uhd_60fps_mif: no property in the node.
[ 1.106415] [7: swapper/0: 1] rear_video_uhd_60fps_i2c: no property in the node.
[ 1.106424] [7: swapper/0: 1] rear_video_uhd_60fps_hpg: no property in the node.
[ 1.106441] [7: swapper/0: 1] rear_video_fhd_capture_hpg: no property in the node.
[ 1.106451] [7: swapper/0: 1] rear_video_whd_capture_int: no property in the node.
[ 1.106460] [7: swapper/0: 1] rear_video_whd_capture_cam: no property in the node.
[ 1.106469] [7: swapper/0: 1] rear_video_whd_capture_mif: no property in the node.
[ 1.106479] [7: swapper/0: 1] rear_video_whd_capture_i2c: no property in the node.
[ 1.106489] [7: swapper/0: 1] rear_video_whd_capture_hpg: no property in the node.
[ 1.106508] [7: swapper/0: 1] rear_video_uhd_capture_hpg: no property in the node.
[ 1.106524] [7: swapper/0: 1] dual_preview_hpg: no property in the node.
[ 1.106539] [7: swapper/0: 1] dual_capture_hpg: no property in the node.
[ 1.106556] [7: swapper/0: 1] dual_video_hpg: no property in the node.
[ 1.106565] [7: swapper/0: 1] dual_video_capture_int: no property in the node.
[ 1.106575] [7: swapper/0: 1] dual_video_capture_cam: no property in the node.
[ 1.106584] [7: swapper/0: 1] dual_video_capture_mif: no property in the node.
[ 1.106593] [7: swapper/0: 1] dual_video_capture_i2c: no property in the node.
[ 1.106602] [7: swapper/0: 1] dual_video_capture_hpg: no property in the node.
[ 1.106611] [7: swapper/0: 1] pip_preview_int: no property in the node.
[ 1.106620] [7: swapper/0: 1] pip_preview_cam: no property in the node.
[ 1.106629] [7: swapper/0: 1] pip_preview_mif: no property in the node.
[ 1.106638] [7: swapper/0: 1] pip_preview_i2c: no property in the node.
[ 1.106646] [7: swapper/0: 1] pip_preview_hpg: no property in the node.
[ 1.106655] [7: swapper/0: 1] pip_capture_int: no property in the node.
[ 1.106664] [7: swapper/0: 1] pip_capture_cam: no property in the node.
[ 1.106672] [7: swapper/0: 1] pip_capture_mif: no property in the node.
[ 1.106681] [7: swapper/0: 1] pip_capture_i2c: no property in the node.
[ 1.106690] [7: swapper/0: 1] pip_capture_hpg: no property in the node.
[ 1.106699] [7: swapper/0: 1] pip_video_int: no property in the node.
[ 1.106708] [7: swapper/0: 1] pip_video_cam: no property in the node.
[ 1.106717] [7: swapper/0: 1] pip_video_mif: no property in the node.
[ 1.106726] [7: swapper/0: 1] pip_video_i2c: no property in the node.
[ 1.106735] [7: swapper/0: 1] pip_video_hpg: no property in the node.
[ 1.106744] [7: swapper/0: 1] pip_video_capture_int: no property in the node.
[ 1.106753] [7: swapper/0: 1] pip_video_capture_cam: no property in the node.
[ 1.106762] [7: swapper/0: 1] pip_video_capture_mif: no property in the node.
[ 1.106771] [7: swapper/0: 1] pip_video_capture_i2c: no property in the node.
[ 1.106780] [7: swapper/0: 1] pip_video_capture_hpg: no property in the node.
[ 1.106796] [7: swapper/0: 1] preview_high_speed_fps_hpg: no property in the node.
[ 1.106806] [7: swapper/0: 1] video_high_speed_60fps_swvdis_int: no property in the node.
[ 1.106815] [7: swapper/0: 1] video_high_speed_60fps_swvdis_cam: no property in the node.
[ 1.106825] [7: swapper/0: 1] video_high_speed_60fps_swvdis_mif: no property in the node.
[ 1.106834] [7: swapper/0: 1] video_high_speed_60fps_swvdis_i2c: no property in the node.
[ 1.106843] [7: swapper/0: 1] video_high_speed_60fps_swvdis_hpg: no property in the node.
[ 1.106859] [7: swapper/0: 1] video_high_speed_60fps_hpg: no property in the node.
[ 1.106876] [7: swapper/0: 1] video_high_speed_120fps_hpg: no property in the node.
[ 1.106886] [7: swapper/0: 1] video_high_speed_240fps_int: no property in the node.
[ 1.106895] [7: swapper/0: 1] video_high_speed_240fps_cam: no property in the node.
[ 1.106904] [7: swapper/0: 1] video_high_speed_240fps_mif: no property in the node.
[ 1.106913] [7: swapper/0: 1] video_high_speed_240fps_i2c: no property in the node.
[ 1.106923] [7: swapper/0: 1] video_high_speed_240fps_hpg: no property in the node.
[ 1.106931] [7: swapper/0: 1] ext_rear_int: no property in the node.
[ 1.106939] [7: swapper/0: 1] ext_rear_cam: no property in the node.
[ 1.106948] [7: swapper/0: 1] ext_rear_mif: no property in the node.
[ 1.106957] [7: swapper/0: 1] ext_rear_i2c: no property in the node.
[ 1.106966] [7: swapper/0: 1] ext_rear_hpg: no property in the node.
[ 1.106975] [7: swapper/0: 1] ext_front_int: no property in the node.
[ 1.106984] [7: swapper/0: 1] ext_front_cam: no property in the node.
[ 1.106992] [7: swapper/0: 1] ext_front_mif: no property in the node.
[ 1.107000] [7: swapper/0: 1] ext_front_i2c: no property in the node.
[ 1.107010] [7: swapper/0: 1] ext_front_hpg: no property in the node.
[ 1.107026] [7: swapper/0: 1] max_hpg: no property in the node.
[ 1.107034] [7: swapper/0: 1] (null)int: no property in the node.
[ 1.107043] [7: swapper/0: 1] (null)cam: no property in the node.
[ 1.107052] [7: swapper/0: 1] (null)mif: no property in the node.
[ 1.107060] [7: swapper/0: 1] (null)i2c: no property in the node.
[ 1.107068] [7: swapper/0: 1] (null)hpg: no property in the node.
[ 1.109462] [7: swapper/0: 1] fimc_is_init_mem - ION
[ 1.116625] [7: swapper/0: 1] [RSC] Internal memory size (aligned) : 042265e0
[ 1.117978] [7: swapper/0: 1] [RSC] Kernel virtual for library: 00000000
[ 1.117988] [7: swapper/0: 1] [RSC] Kernel virtual for debug: ffffffc07f180000
[ 1.117997] [7: swapper/0: 1] [RSC] fimc_is_init_mem done
[ 1.118012] [7: swapper/0: 1] [RSC] fimc_is_resourcemgr_probe(0)
[ 1.118092] [7: swapper/0: 1] fimc-is is created
[ 1.118109] [7: swapper/0: 1] isfw-msg is created
[ 1.118152] [7: swapper/0: 1] Success to create sys/devices/svc svc : 0xffffffc07f51b680
[ 1.118167] [7: swapper/0: 1] Success to create sys/devices/svc/Camera : 0xffffffc07f51b700
[ 1.118602] [7: swapper/0: 1] [@][VID] exynos-fimc-is-30s(110) is created
[ 1.118745] [7: swapper/0: 1] [@][VID] exynos-fimc-is-30c(111) is created
[ 1.118840] [7: swapper/0: 1] [@][VID] exynos-fimc-is-30p(112) is created
[ 1.118928] [7: swapper/0: 1] [@][VID] exynos-fimc-is-31s(120) is created
[ 1.119013] [7: swapper/0: 1] [@][VID] exynos-fimc-is-31c(121) is created
[ 1.119095] [7: swapper/0: 1] [@][VID] exynos-fimc-is-31p(122) is created
[ 1.119183] [7: swapper/0: 1] [@][VID] exynos-fimc-is-i0s(130) is created
[ 1.119269] [7: swapper/0: 1] [@][VID] exynos-fimc-is-i0c(131) is created
[ 1.119352] [7: swapper/0: 1] [@][VID] exynos-fimc-is-i0p(132) is created
[ 1.119451] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m0s(160) is created
[ 1.119532] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m1s(161) is created
[ 1.119726] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m0p(170) is created
[ 1.119820] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m1p(171) is created
[ 1.119913] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m2p(172) is created
[ 1.120002] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m3p(173) is created
[ 1.120086] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m4p(174) is created
[ 1.120167] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m5p(175) is created
[ 1.120254] [7: swapper/0: 1] [@][VID] exynos-fimc-is-vra(180) is created
[ 1.120311] [7: swapper/0: 1] [@][ITFC][ID: 1] 3AA VA(0xffffff800e1c0000)
[ 1.120452] [7: swapper/0: 1] [@][ITFC][ID: 1] kvaddr for taaisp: 0xffffff800c08c000
[ 1.120468] [7: swapper/0: 1] [@][ITFC][ID: 2] 3AA VA(0xffffff800e1e0000)
[ 1.120554] [7: swapper/0: 1] [@][ITFC][ID: 3] ISP VA(0xffffff800e200000)
[ 1.120629] [7: swapper/0: 1] [@][ITFC][ID:12] MCSC0 VA(0xffffff800e220000)
[ 1.120672] [7: swapper/0: 1] [@][ITFC][ID:15] VRA0 VA(0xffffff800e240000)
[ 1.120688] [7: swapper/0: 1] [@][ITFC][ID:15] VRA1 VA(0xffffff800e260000)
[ 1.120729] [7: swapper/0: 1] [@][ITFC][ID:15] kvaddr for vra: 0xffffff800c58d000
[ 1.120741] [7: swapper/0: 1] [@][HW:3AA0]probe done
[ 1.120751] [7: swapper/0: 1] [@][HW:3AA1]probe done
[ 1.120760] [7: swapper/0: 1] [@][HW:ISP0]probe done
[ 1.120771] [7: swapper/0: 1] [@][HW:MCS0]probe done
[ 1.120783] [7: swapper/0: 1] [@][HW:VRA]probe done
[ 1.120806] [7: swapper/0: 1] [@][HW:3AA0]sfr dump memory (V/P/S):(ffffffc07f660000/00000000ff660000/0x10000)[0x14450000~0x1445FFFF]
[ 1.120828] [7: swapper/0: 1] [@][HW:3AA1]sfr dump memory (V/P/S):(ffffffc07f670000/00000000ff670000/0x10000)[0x14460000~0x1446FFFF]
[ 1.120848] [7: swapper/0: 1] [@][HW:ISP0]sfr dump memory (V/P/S):(ffffffc07f580000/00000000ff580000/0x10000)[0x14600000~0x1460FFFF]
[ 1.120866] [7: swapper/0: 1] [@][HW:MCS0]sfr dump memory (V/P/S):(ffffffc07f590000/00000000ff590000/0x10000)[0x14640000~0x1464FFFF]
[ 1.120885] [7: swapper/0: 1] [@][HW:VRA]sfr dump memory (V/P/S):(ffffffc07f0a0000/00000000ff0a0000/0x10000)[0x14610000~0x1461FFFF]
[ 1.120903] [7: swapper/0: 1] [@][HW:VRA]sfr B dump memory (V/P/S):(ffffffc07f0b0000/00000000ff0b0000/0x10000)[0x14620000~0x1462FFFF]
[ 1.120919] [7: swapper/0: 1] exynos-fimc-is 14440000.fimc_is: Fault handler is registered for 14730000.sysmmu
[ 1.120932] [7: swapper/0: 1] exynos-fimc-is 14440000.fimc_is: Fault handler is registered for 14760000.sysmmu
[ 1.120947] [7: swapper/0: 1] exynos-fimc-is 14440000.fimc_is: Fault handler is registered for 14540000.sysmmu
[ 1.120992] [7: swapper/0: 1] [ERR]fimc_is_probe:1570:pinctrl_lookup_state failed!!!
[ 1.120992] [7: swapper/0: 1]
[ 1.121005] [7: swapper/0: 1] fimc_is_probe:end
[ 1.121698] [7: swapper/0: 1] sensor_module_2p6_probe use_pdaf(1)
[ 1.121713] [7: swapper/0: 1] sensor_module_2p6_probe exist_actuator(1)
[ 1.121756] [7: swapper/0: 1] i2c_ch dt parsing skipped
[ 1.121765] [7: swapper/0: 1] i2c_addr dt parsing skipped
[ 1.121799] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-2P6 fimc-is_sensor_2p6@5A: sensor_module_2p6_power_setpin_with_af E v4
[ 1.121866] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-2P6 fimc-is_sensor_2p6@5A: failed to get gpio_cam_avdd_en
[ 1.121907] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-2P6 fimc-is_sensor_2p6@5A: sensor_module_2p6_power_setpin_with_af X v4
[ 1.122005] [7: swapper/0: 1] internal vc(1), type(1), offset(1)
[ 1.122018] [7: swapper/0: 1] sensor_module_2p6_probe pdta->id(0), module_enum id = 0
[ 1.122035] [7: swapper/0: 1] sensor_module_2p6_probe done
[ 1.122436] [7: swapper/0: 1] i2c_ch dt parsing skipped
[ 1.122449] [7: swapper/0: 1] i2c_addr dt parsing skipped
[ 1.122484] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-3P8SP fimc-is_sensor_3p8sp@5A: sensor_module_3p8sp_power_setpin E v4
[ 1.122557] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-3P8SP fimc-is_sensor_3p8sp@5A: sensor_module_3p8sp_power_setpin X v4
[ 1.122659] [7: swapper/0: 1] sensor_module_3p8sp_probe pdta->id(1), module_enum id = 0
[ 1.122677] [7: swapper/0: 1] sensor_module_3p8sp_probe done
[ 1.123046] [7: swapper/0: 1] sensor_module_sr846_probe exist_actuator(0)
[ 1.123086] [7: swapper/0: 1] i2c_ch dt parsing skipped
[ 1.123097] [7: swapper/0: 1] i2c_addr dt parsing skipped
[ 1.123125] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-SR846 fimc-is_sensor_sr846@42: sensor_module_sr846_power_setpin E v4
[ 1.123170] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-SR846 fimc-is_sensor_sr846@42: sensor_module_sr846_power_setpin X v4
[ 1.123268] [7: swapper/0: 1] sensor_module_sr846_probe pdta->id(2), module_enum id = 0
[ 1.123285] [7: swapper/0: 1] sensor_module_sr846_probe done
[ 1.123401] [7: swapper/0: 1] cis_2p6_probe sensor id 0
[ 1.123410] [7: swapper/0: 1] sensor peri is not yet probed
[ 1.123521] [7: swapper/0: 1] cis_3p8sp_probe sensor id 1
[ 1.123532] [7: swapper/0: 1] sensor peri is not yet probed
[ 1.123676] [7: swapper/0: 1] cis_sr846_probe sensor id 2
[ 1.123688] [7: swapper/0: 1] sensor peri is not yet probed
[ 1.123777] [7: swapper/0: 1] sensor_ak7372_actuator_probe sensor_id(0) actuator_place(0)
[ 1.123792] [7: swapper/0: 1] sensor_ak7372_actuator_probe done
[ 1.124054] [7: swapper/0: 1] place read is fail(-22)
[ 1.124065] [7: swapper/0: 1] flash_ktd2692_probe sensor_id(0) flash_place(0)
[ 1.124080] [7: swapper/0: 1] [ERR]flash_ktd2692_platform_probe:275:flash gpio probe fail(-22)
[ 1.124080] [7: swapper/0: 1]
[ 1.124101] [7: swapper/0: 1] FIMC-IS-SENSOR-FLASH-KTD2692-PLATFORM: probe of fimc-is-flash_ktd2692@0 failed with error -22
[ 1.124191] [7: swapper/0: 1] fimc_is_eeprom_i2c 2-0050[0]: fimc_is_sensor_eeprom probed!
[ 1.124225] [7: swapper/0: 1] fimc_is_eeprom_i2c 2-0051[1]: fimc_is_sensor_eeprom probed!
[ 1.124602] [7: swapper/0: 1] sec-thermistor sec_thermistor@0: sec_therm_probe: fail to get iio channel
[ 1.124697] [7: swapper/0: 1] sec-thermistor sec_thermistor@6: sec_therm_probe: fail to get iio channel
[ 1.125810] [7: swapper/0: 1] s3c2410-wdt 10060000.watchdog: watchdog inactive, reset disabled, irq disabled
[ 1.126089] [7: swapper/0: 1] device-mapper: uevent: version 1.0.3
[ 1.126300] [7: swapper/0: 1] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.126668] [6: swapper/0: 1] exynos_acme: Complete to initialize cpufreq-domain0
[ 1.126685] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 cal-id : 0xb040003
[ 1.126697] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 sibling cpus : 0-5
[ 1.126709] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 boot freq = 1014000 kHz, resume freq = 1014000 kHz
[ 1.126723] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 max freq : 1586000 kHz, min freq : 449000 kHz
[ 1.126735] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 PM QoS max-class-id : 4, min-class-id : 3
[ 1.126743] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 table size = 18
[ 1.126753] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 4 1586000 kHz
[ 1.126761] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 5 1482000 kHz
[ 1.126770] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 6 1352000 kHz
[ 1.126778] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 7 1248000 kHz
[ 1.126785] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 8 1144000 kHz
[ 1.126792] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 9 1014000 kHz
[ 1.126800] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L10 902000 kHz
[ 1.126808] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L11 839000 kHz
[ 1.126816] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L12 757000 kHz
[ 1.126823] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L13 676000 kHz
[ 1.126830] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L14 546000 kHz
[ 1.126838] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L15 449000 kHz
[ 1.126978] [6: swapper/0: 1] exynos_acme: Complete to initialize cpufreq-domain1
[ 1.126986] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 cal-id : 0xb040002
[ 1.126995] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 sibling cpus : 6-7
[ 1.127003] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 boot freq = 1352000 kHz, resume freq = 1352000 kHz
[ 1.127013] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 max freq : 2184000 kHz, min freq : 936000 kHz
[ 1.127021] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 PM QoS max-class-id : 6, min-class-id : 5
[ 1.127032] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 table size = 17
[ 1.127040] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 3 2184000 kHz
[ 1.127048] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 4 2080000 kHz
[ 1.127055] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 5 1976000 kHz
[ 1.127062] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 6 1872000 kHz
[ 1.127069] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 7 1768000 kHz
[ 1.127076] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 8 1664000 kHz
[ 1.127083] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 9 1560000 kHz
[ 1.127091] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L10 1352000 kHz
[ 1.127099] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L11 1144000 kHz
[ 1.127106] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L12 936000 kHz
[ 1.127217] [6: swapper/0: 1] exynos_acme: CPUFREQ domain0 registered
[ 1.127395] [6: swapper/0: 1] exynos_acme: CPUFREQ domain1 registered
[ 1.128247] [6: swapper/0: 1] exynos_acme: Initialized Exynos cpufreq driver
[ 1.128790] [6: swapper/0: 1] Exynos cpuidle driver Initialized
[ 1.128829] [6: swapper/0: 1] Synopsys Designware Multimedia Card Interface Driver
[ 1.129349] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: supports-highspeed property is deprecated.
[ 1.129517] [6: swapper/0: 1] exynos_smu_get_pdevice: Found smu device ffffffc874735200
[ 1.129524] [6: swapper/0: 1] exynos_smu_get_pdevice: Matching platform device ffffffc8748bec00
[ 1.129557] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: IDMAC supports 64-bit address mode.
[ 1.129696] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: Using internal DMA controller.
[ 1.129722] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: FIFOTH: 0x 300f0030
[ 1.129733] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: Version ID is 270a
[ 1.129875] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: DW MMC controller at irq 62,64 bit host data width,64 deep fifo
[ 1.143711] [7: swapper/0: 1] mmc_host mmc0: Bus speed (slot 0) = 24984375Hz (slot req 400000Hz, actual 390380HZ div = 32)
[ 1.159689] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: CMDQ host enabled!!!
[ 1.159727] [6: swapper/0: 1] dw_mci_transferred_cnt_init: trans_count: successed.....
[ 1.159735] [6: swapper/0: 1] dw_mci_debug_init: create debug_log sysfs : successed.....
[ 1.159744] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: host 0 debug On
[ 1.159752] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: 1 slots initialized
[ 1.160049] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: supports-highspeed property is deprecated.
[ 1.160216] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: exynos_mmc_smu_get_vops: exynos-mmc-smu property not specified
[ 1.160225] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: exynos_mmc_smu_get_pdevice: exynos-mmc-smu property not specified
[ 1.160233] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: exynos_mmc_smu_get_dev: Host device doesn't have SMU or fail to get SMU
[ 1.160240] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: dw_mci_probe, Fail to get Access control device.(-19)
[ 1.160249] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: IDMAC supports 64-bit address mode.
[ 1.160398] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: Using internal DMA controller.
[ 1.160427] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: FIFOTH: 0x 300f0030
[ 1.160435] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: Version ID is 270a
[ 1.160663] [7: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: DW MMC controller at irq 63,64 bit host data width,64 deep fifo
[ 1.160765] [7: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: Slot quirk 'disable-wp' is deprecated
[ 1.188069] [7: swapper/0: 1] mmc_host mmc1: Bus speed (slot 0) = 24984375Hz (slot req 400000Hz, actual 390380HZ div = 32)
[ 1.203649] [7: swapper/0: 1] mmc1 skip mmc detect change
[ 1.203699] [7: swapper/0: 1] dw_mci_transferred_cnt_init: trans_count: successed.....
[ 1.203709] [7: swapper/0: 1] dw_mci_debug_init: create debug_log sysfs : successed.....
[ 1.203718] [7: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: host 1 debug On
[ 1.203724] [7: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: 1 slots initialized
[ 1.203769] [7: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: success to request irq for card detect.
[ 1.203777] [7: swapper/0: 1] wake enabled for irq 199
[ 1.203840] [0: kworker/0:1: 1183] mmc_host mmc1: card inserted
[ 1.204277] [7: swapper/0: 1] leds-ktd2692 leds_ktd2692: max_current = <1500>
[ 1.204286] [7: swapper/0: 1] leds-ktd2692 leds_ktd2692: flash_current = <1200><12>
[ 1.204293] [7: swapper/0: 1] leds-ktd2692 leds_ktd2692: movie_current = <175><5>
[ 1.204300] [7: swapper/0: 1] leds-ktd2692 leds_ktd2692: factory_current = <175><5>
[ 1.204307] [7: swapper/0: 1] leds-ktd2692 leds_ktd2692: torch_current = <75><1>
[ 1.204314] [7: swapper/0: 1] ktd2692_probe : KTD2692_LED Probe
[ 1.204555] [7: swapper/0: 1] [LED] brightness : 100, lp_brightness : 100
[ 1.204562] [7: swapper/0: 1] [LED] octa_color 0x1
[ 1.204569] [7: swapper/0: 1] [LED] R ratio : 18 ratio_low : 2
[ 1.204576] [7: swapper/0: 1] [LED] G ratio : 7 ratio_low : 1
[ 1.204581] [7: swapper/0: 1] [LED] B ratio : 45 ratio_low : 3
[ 1.204677] [7: swapper/0: 1] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.205240] [3: kworker/u16:2: 241] mmc0: MAN_BKOPS_EN bit is not set
[ 1.205258] [3: kworker/u16:2: 241] mmc0: CMDQ supported: depth: 16
[ 1.205268] [3: kworker/u16:2: 241] mmc0: cache barrier support 0 flush policy 0
[ 1.205280] [3: kworker/u16:2: 241] mmc0: eMMC Firmware version: 3
[ 1.205994] [7: swapper/0: 1] Successfully registered hid_synaptics_driver
[ 1.206094] [0: kworker/u16:2: 241] mmc0: STROBE ENHANCED enable
[ 1.206102] [7: swapper/0: 1] usbcore: registered new interface driver usbhid
[ 1.206111] [7: swapper/0: 1] usbhid: USB HID core driver
[ 1.206623] [6: swapper/0: 1] ashmem: initialized
[ 1.206924] [6: swapper/0: 1] sec_param_work_init: start
[ 1.206966] [6: swapper/0: 1] [NAD_BALANCER] Not support NAD balancer.
[ 1.207334] [6: swapper/0: 1] [sec_abc] sec_abc_init
[ 1.207531] [6: swapper/0: 1] [sec_abc] sec_abc_probe
[ 1.207545] [6: swapper/0: 1] sec_abc_probe: parse dt done
[ 1.207805] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: not used UM monitor
[ 1.207823] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 2093000Khz, 0uV
[ 1.207830] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 2002000Khz, 0uV
[ 1.207836] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 1794000Khz, 0uV
[ 1.207842] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 1539000Khz, 0uV
[ 1.207850] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 1352000Khz, 0uV
[ 1.207855] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 1014000Khz, 0uV
[ 1.207861] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 845000Khz, 0uV
[ 1.207867] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 676000Khz, 0uV
[ 1.207875] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 546000Khz, 0uV
[ 1.207882] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 420000Khz, 0uV
[ 1.207890] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: max_freq: 1794000Khz, get_max_freq: 1794000Khz
[ 1.207898] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: min_freq: 420000Khz, get_min_freq: 420000Khz
[ 1.207904] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: min_freq: 420000Khz, max_freq: 1794000Khz
[ 1.207909] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: current frequency: 0Khz
[ 1.208463] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: Initial Frequency: 1794000, Initial Voltage: 0
[ 1.209269] [7: kworker/u16:2: 241] mmc_host mmc0: Bus speed (slot 0) = 49968750Hz (slot req 52000000Hz, actual 49968750HZ div = 0)
[ 1.209410] [7: kworker/u16:2: 241] mmc_host mmc0: Bus speed (slot 0) = 399750000Hz (slot req 200000000Hz, actual 199875000HZ div = 1)
[ 1.209726] [7: kworker/u16:2: 241] mmc0: cmdq_host_alloc_tdl: desc_size: 4608 data_sz: 507904 slot-sz: 144
[ 1.209726] [7: kworker/u16:2: 241] task_desc_len: 16 trans_desc_len 128 link_desc_len 128
[ 1.210029] [7: kworker/u16:2: 241] mmc0: desc-base: 0xffffff80004fd000 trans-base: 0xffffff800e2ca000
[ 1.210029] [7: kworker/u16:2: 241] desc_dma 0x8fd224000 trans_dma: 0x8fd280000
[ 1.210046] [7: kworker/u16:2: 241] mmc0: CMDQ enabled on card
[ 1.210059] [7: kworker/u16:2: 241] mmc0: new HS400 MMC card at address 0001
[ 1.210387] [7: kworker/u16:2: 241] mmcblk0: mmc0:0001 CKTM4R 58.2 GiB
[ 1.210520] [7: kworker/u16:2: 241] mmcblk0boot0: mmc0:0001 CKTM4R partition 1 4.00 MiB
[ 1.210653] [7: kworker/u16:2: 241] mmcblk0boot1: mmc0:0001 CKTM4R partition 2 4.00 MiB
[ 1.210829] [7: kworker/u16:2: 241] mmcblk0rpmb: mmc0:0001 CKTM4R partition 3 16.0 MiB
[ 1.212222] [6: kworker/u16:2: 241] Alternate GPT is invalid, using primary GPT.
[ 1.212257] [6: kworker/u16:2: 241] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
[ 1.213477] [7: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: devfreq is initialized!!
[ 1.213560] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: not used UM monitor
[ 1.213575] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: DEVFREQ : 533000Khz, 0uV
[ 1.213582] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: DEVFREQ : 333000Khz, 0uV
[ 1.213589] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: DEVFREQ : 267000Khz, 0uV
[ 1.213595] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: DEVFREQ : 133000Khz, 0uV
[ 1.213602] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: DEVFREQ : 107000Khz, 0uV
[ 1.213608] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: max_freq: 533000Khz, get_max_freq: 533000Khz
[ 1.213614] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: min_freq: 107000Khz, get_min_freq: 107000Khz
[ 1.213622] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: min_freq: 107000Khz, max_freq: 533000Khz
[ 1.213680] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: Initial Frequency: 533000, Initial Voltage: 0
[ 1.214016] [6: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: devfreq is initialized!!
[ 1.214080] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: This does not use acpm
[ 1.214091] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: not used UM monitor
[ 1.214106] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: DEVFREQ : 267000Khz, 0uV
[ 1.214113] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: DEVFREQ : 222000Khz, 0uV
[ 1.214120] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: DEVFREQ : 167000Khz, 0uV
[ 1.214126] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: DEVFREQ : 80000Khz, 0uV
[ 1.214132] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: max_freq: 267000Khz, get_max_freq: 267000Khz
[ 1.214141] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: min_freq: 167000Khz, get_min_freq: 167000Khz
[ 1.214147] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: min_freq: 167000Khz, max_freq: 267000Khz
[ 1.214160] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: Initial Frequency: 267000, Initial Voltage: 0
[ 1.214309] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: devfreq is initialized!!
[ 1.214367] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: This does not use acpm
[ 1.214376] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: not used UM monitor
[ 1.214386] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: DEVFREQ : 690000Khz, 0uV
[ 1.214392] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: DEVFREQ : 680000Khz, 0uV
[ 1.214399] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: DEVFREQ : 670000Khz, 0uV
[ 1.214405] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: DEVFREQ : 660000Khz, 0uV
[ 1.214411] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: DEVFREQ : 650000Khz, 0uV
[ 1.214417] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: max_freq: 690000Khz, get_max_freq: 690000Khz
[ 1.214423] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: min_freq: 650000Khz, get_min_freq: 650000Khz
[ 1.214429] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: min_freq: 650000Khz, max_freq: 690000Khz
[ 1.214436] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: Initial Frequency: 690000, Initial Voltage: 0
[ 1.214578] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: devfreq is initialized!!
[ 1.214633] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: This does not use acpm
[ 1.214642] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: not used UM monitor
[ 1.214653] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: DEVFREQ : 1180000Khz, 0uV
[ 1.214660] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: DEVFREQ : 800000Khz, 0uV
[ 1.214666] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: DEVFREQ : 590000Khz, 0uV
[ 1.214671] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: DEVFREQ : 394000Khz, 0uV
[ 1.214678] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: max_freq: 1180000Khz, get_max_freq: 1180000Khz
[ 1.214684] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: min_freq: 394000Khz, get_min_freq: 394000Khz
[ 1.214690] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: min_freq: 394000Khz, max_freq: 1180000Khz
[ 1.214696] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: Initial Frequency: 394000, Initial Voltage: 0
[ 1.214932] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: devfreq is initialized!!
[ 1.214997] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: This does not use acpm
[ 1.215007] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: not used UM monitor
[ 1.215025] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: DEVFREQ : 267000Khz, 0uV
[ 1.215032] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: DEVFREQ : 200000Khz, 0uV
[ 1.215038] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: DEVFREQ : 100000Khz, 0uV
[ 1.215043] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: DEVFREQ : 50000Khz, 0uV
[ 1.215050] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: max_freq: 267000Khz, get_max_freq: 267000Khz
[ 1.215056] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: min_freq: 50000Khz, get_min_freq: 50000Khz
[ 1.215062] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: min_freq: 50000Khz, max_freq: 267000Khz
[ 1.215068] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: Initial Frequency: 267000, Initial Voltage: 0
[ 1.215267] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: devfreq is initialized!!
[ 1.215430] [6: swapper/0: 1] battery_notifier_init
[ 1.215499] [6: swapper/0: 1] s2mu004_fuelgauge_init: S2MU004 Fuelgauge Init
[ 1.215660] [6: swapper/0: 1] s2mu004_fuelgauge_probe: S2MU004 Fuelgauge Driver Loading
[ 1.215750] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt : LOW TEMP LIMIT(100)
[ 1.215756] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt : SW VBAT_L recovery (3465)mV
[ 1.215824] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] fuelgauge->fg_num_age_step 5
[ 1.215832] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] age_step = 0, table3[0] 136, table4[0] 58, batcap[0] 18, accum[0] 07, soc_arr[0] 11052, ocv_arr[0] 44414
[ 1.215838] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] age_step = 1, table3[0] 136, table4[0] 58, batcap[0] 68, accum[0] 07, soc_arr[0] 11160, ocv_arr[0] 44414
[ 1.215844] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] age_step = 2, table3[0] 136, table4[0] 58, batcap[0] a0, accum[0] 07, soc_arr[0] 11285, ocv_arr[0] 44414
[ 1.215850] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] age_step = 3, table3[0] 136, table4[0] 58, batcap[0] d8, accum[0] 07, soc_arr[0] 11550, ocv_arr[0] 44416
[ 1.215856] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] age_step = 4, table3[0] 136, table4[0] 58, batcap[0] d0, accum[0] 07, soc_arr[0] 12100, ocv_arr[0] 44414
[ 1.216532] [6: swapper/0: 1] s2mu004_fuelgauge_probe: S2MU004 Fuelgauge revision: 2, reg 0x48 = 0x22
[ 1.218429] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: OTP 4E(00) 4F(00) current 4E(6b) 4F(10)
[ 1.221120] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: [DEBUG]s2mu004_get_rawsoc: data0 (58) data1 (36)
[ 1.234151] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc raw data0 (221) data1 (8)
[ 1.234158] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc (5539)
[ 1.234165] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: current_soc (5660), previous soc (0), diff (0), FG_mode(0)
[ 1.236597] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0x 2f7), avg current (-186)mA
[ 1.236604] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)%
[ 1.289465] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_monout_avgvbat: avgvbat (3866)
[ 1.289477] [6: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 1.289484] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: UI SOC = 0
[ 1.289492] [6: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 1.296737] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3864)
[ 1.297991] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (172) data1 (123)
[ 1.298623] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3864), src (0x01)
[ 1.299873] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0x 44b)
[ 1.299881] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (-269)mA
[ 1.299889] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: Fuelgauge Mode: 0, Force power-off voltage: 3300
[ 1.299897] [6: swapper/0: 1] s2mu004_get_rawsoc: Fail to set psy (s2mu004-charger)
[ 1.320991] [6: swapper/0: 1] [FG]s2mu004_fg_test_read: 0x00:0x10, 0x01:0x03, 0x02:0x00, 0x03:0x1c, 0x04:0xac, 0x05:0x7b, 0x06:0x4b, 0x07:0x04, 0x08:0x3a, 0x09:0x24, 0x0a:0x0c, 0x0b:0x1d, 0x0c:0x10, 0x0d:0x00, 0x0e:0x18, 0x0f:0x2e, 0x10:0x86, 0x11:0x0b, 0x12:0x00, 0x13:0x0f, 0x14:0x40, 0x15:0x00, 0x16:0x14, 0x17:0x04, 0x18:0x0c, 0x19:0xb0, 0x1a:0x1a, 0x1b:0x00, 0x1c:0x3c, 0x1d:0xec, 0x1e:0x03, 0x1f:0x00, 0x25:0x10, 0x27:0x50,
[ 1.320999] [6: swapper/0: 1] s2mu004_init_regs: s2mu004 fuelgauge initialize
[ 1.326446] [6: swapper/0: 1] s2mu004_alert_init: irq_lvl(vbat:0xa, soc:0x10)
[ 1.328602] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_fuelgauge_fuelalert_init: irq_reg(1c00) irq(26)
[ 1.328625] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_fuelgauge_probe : fg_irq = 200
[ 1.328747] [6: swapper/0: 1] wake enabled for irq 200
[ 1.328753] [6: swapper/0: 1] s2mu004_fuelgauge_probe: S2MU004 Fuelgauge Driver Loaded
[ 1.329042] [6: swapper/0: 1] s2mu004_charger_probe:[BATT] S2MU004 Charger driver probe
[ 1.329149] [6: swapper/0: 1] s2mu004_charger_parse_dt: Charger switching FRQ is Empty
[ 1.329190] [6: swapper/0: 1] s2mu004_charger_parse_dt: battery,chg_float_voltage is 4350
[ 1.329237] [6: swapper/0: 1] s2mu004_charger_parse_dt np NULL(sec-multi-charger)
[ 1.329242] [6: swapper/0: 1] s2mu004_charger_parse_dt DT file parsed succesfully, 0
[ 1.329906] [6: swapper/0: 1] s2mu004_chg_init : DEV ID : 0x3
[ 1.337015] [6: swapper/0: 1] s2mu004_chg_init : S2MU004_CHG_CTRL17 : 0x1d
[ 1.339877] [6: swapper/0: 1] s2mu004_chg_init : S2MU004_CHG_CTRL13 : 0x22
[ 1.346528] [6: swapper/0: 1] s2mu004_chg_init : S2MU004_CHG_CTRL12 : 0x12
[ 1.348275] [6: swapper/0: 1] s2mu004_chg_init : S2MU004_CHG_CTRL7 : 0x46
[ 1.376885] I[0: swapper/0: 0] random: nonblocking pool is initialized
[ 1.381732] [7: swapper/0: 1] s2mu004_test_read: 0x0a:0x03, 0x0b:0x00, 0x0c:0x03, 0x0d:0x01, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x11, 0x1a:0x0a, 0x1b:0x06, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x1b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95
[ 1.381740] [7: swapper/0: 1] s2mu004_charger_probe:[BATT] S2MU004 charger driver loaded OK
[ 1.382223] [7: swapper/0: 1] exynos_get_idle_ip_index: Fail to find 120a0000.adc in idle-ip list with err -61
[ 1.382265] [7: swapper/0: 1] 120a0000.adc supply vdd not found, using dummy regulator
[ 1.382545] [7: swapper/0: 1] exynos-adc 120a0000.adc: Probed successfully driver.
[ 1.383135] [7: swapper/0: 1] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 6.3
[ 1.383316] [7: swapper/0: 1] Trustonic TEE: mobicore_probe: MobiCore t-base-EXYNOS64-Android-400A-V012-20170726_155303_34988_66846
[ 1.383649] [7: swapper/0: 1] Trustonic TEE: __mc_switch_core: <- cpu=0x00000001, active_cpu=0x00000000
[ 1.383649] [7: swapper/0: 1]
[ 1.383709] [0: tee_fastcall: 1733] Trustonic TEE: mc_exec_core_switch: CoreSwap ok 0 -> 1
[ 1.383903] [7: swapper/0: 1] Loading t-base-tui module.
[ 1.383909] [7: swapper/0: 1] t-base-EXYNOS64-Android-400A-V011-20170203_131128_25330_57476
[ 1.384085] [5: swapper/0: 1] [VIB] zh915_init
[ 1.384215] [5: swapper/0: 1] ccic_notifier_init
[ 1.384227] [5: swapper/0: 1] ccic_notifier_init already registered
[ 1.384247] [5: swapper/0: 1] etspi_init
[ 1.384843] [5: swapper/0: 1] etspi_probe
[ 1.384880] [5: swapper/0: 1] etspi_parse_dt: sleepPin=130
[ 1.384896] [5: swapper/0: 1] etspi_parse_dt: drdyPin=11
[ 1.384915] [5: swapper/0: 1] etspi_parse_dt: ldo_pin=129
[ 1.384927] [5: swapper/0: 1] etspi_parse_dt: chipid: ET510
[ 1.384940] [5: swapper/0: 1] etspi_parse_dt: ldocontrol=1
[ 1.384960] [5: swapper/0: 1] etspi_parse_dt is successful
[ 1.384974] [5: swapper/0: 1] etspi_platformInit
[ 1.385033] [5: swapper/0: 1] etspi_platformInit sleep value =0
[ 1.385033] [5: swapper/0: 1] etspi_platformInit ldo en value =0
[ 1.385055] [5: swapper/0: 1] etspi_platformInit successful status=0
[ 1.385251] [7: swapper/0: 1] etspi_probe is successful
[ 1.385277] [7: swapper/0: 1] etspi_init is successful
[ 1.385294] [7: swapper/0: 1] uh_log : create /proc/uh_log
[ 1.385422] [7: swapper/0: 1] usbcore: registered new interface driver snd-usb-audio
[ 1.385848] [7: swapper/0: 1] cod3035x 4-0003: cod3035x_i2c_probe pinctrl
[ 1.385895] [5: swapper/0: 1] codec_speedy: registered
[ 1.386032] [5: swapper/0: 1] tfa98xx_i2c_init(): TFA98XX driver version v4.2.0-Jan.24,2017
[ 1.386190] [5: swapper/0: 1] tfa98xx_i2c_probe(): tfa98xx_i2c_probe: start probing
[ 1.386205] [5: swapper/0: 1] tfa98xx_i2c_probe(): addr=0x34
[ 1.387106] [7: swapper/0: 1] tfa98xx_i2c_probe(): TFA9872 detected
[ 1.387116] [7: swapper/0: 1] tfa98xx_append_i2c_address(): dai_drv[0].name=tfa98xx-aif-8-34
[ 1.387124] [7: swapper/0: 1] tfa98xx_append_i2c_address(): dai_drv[0].playback.stream_name=AIF Playback-8-34
[ 1.387131] [7: swapper/0: 1] tfa98xx_append_i2c_address(): dai_drv[0].capture.stream_name=AIF Capture-8-34
[ 1.387145] [7: swapper/0: 1] tfa98xx 8-0034: Skipping IRQ registration
[ 1.387205] [7: swapper/0: 1] tfa98xx_i2c_probe(): tfa98xx_i2c_probe: Probe completed successfully!
[ 1.387306] [7: swapper/0: 1] tfa98xx_cal_init: g_nxp_class=ffffffc07f8da200
[ 1.387312] [7: swapper/0: 1] tfa98xx_cal_init: initialized
[ 1.387348] [7: swapper/0: 1] tfa98xx_log_init: g_nxp_class=ffffffc07f8da200
[ 1.387353] [7: swapper/0: 1] tfa98xx_log_init: initialized
[ 1.387679] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_platform_probe: DBMDX codec driver version = 4.031
[ 1.387691] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA feature activated
[ 1.387701] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: Multi Interface Probe is not supported
[ 1.387708] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using device-tree VA firmware name: dbmd4_va_fw.bin
[ 1.387717] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using default VA preboot firmware name: dbmd4_va_preboot_fw.bin
[ 1.387727] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: no buffering_timeout, setting to 200
[ 1.387734] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using min_samples_chunk_size of 128
[ 1.387740] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using max_detection_buffer_size of 0
[ 1.387746] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: no va buffering pcm rate, setting to 16000
[ 1.387753] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using 13 VA configuration values from dev-tree
[ 1.387759] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000000: 0x80000000
[ 1.387765] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000001: 0x80000000
[ 1.387770] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000002: 0x80000000
[ 1.387775] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000003: 0x80290020
[ 1.387781] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000004: 0x802210e0
[ 1.387786] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000005: 0x80158e8e
[ 1.387792] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000006: 0x801b0020
[ 1.387798] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000007: 0x801a0011
[ 1.387804] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000008: 0x80230001
[ 1.387810] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000009: 0x80108017
[ 1.387815] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000a: 0x80000000
[ 1.387820] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000b: 0x80000000
[ 1.387826] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000c: 0x80000000
[ 1.387831] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using 3 VA mic configuration values from device-tree
[ 1.387839] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000000: 0x0000f041
[ 1.387844] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000001: 0x00001044
[ 1.387850] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000002: 0x00000008
[ 1.387856] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA default mic config: 0x00000000
[ 1.387864] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using backlog length of 1300 from device-tree
[ 1.387870] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using OKG backlog length of 1000 from device-tree
[ 1.387879] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using 3 VA speed configuration values from device-tree
[ 1.387888] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000000: 0x00000000 460800 0 960000
[ 1.387894] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000001: 0x00000000 2000000 0 4800000
[ 1.387900] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000002: 0x00000000 3000000 0 4800000
[ 1.387906] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: no wakeup_disabled definition in dev-tree
[ 1.387912] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using use_gpio_for_wakeup of 1 from dev-tree
[ 1.387918] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: no send_wakeup_seq definition in device-tree
[ 1.387923] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using wakeup_set_value of 0 from device-tree
[ 1.387930] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using firmware_id of 0x dbd4 from device-tree
[ 1.387939] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: using dbmdx_master_clk at 32768HZ from device-tree
[ 1.387948] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no dbmdx_master_clk definition in device-tree
[ 1.387960] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no constant-clk-rate definition in device-tree
[ 1.387967] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no dbmdx_constant_clk definition in device-tree
[ 1.388283] [7: swapper/0: 1] dbmd_4_6-spi spi2.0: spi_common_probe: Setting spi read chunk to 8192 bytes
[ 1.388291] [7: swapper/0: 1] dbmd_4_6-spi spi2.0: spi_common_probe: Setting spi write chunk to 262144 bytes
[ 1.388297] [7: swapper/0: 1] dbmd_4_6-spi spi2.0: spi_common_probe: Setting Min DMA Cmd Size to default: 0 bytes
[ 1.388302] [7: swapper/0: 1] dbmd_4_6-spi spi2.0: spi_common_probe: Setting Min DMA Cmd Size to default: 0 bytes
[ 1.388313] [7: swapper/0: 1] dbmd_4_6-spi spi2.0: spi_common_probe: successfully probed
[ 1.388728] [7: swapper/0: 1] snd-dbmdx-mach-drv snd-dbmdx-mach-drv: dbmdx_snd_probe:
[ 1.388880] [7: swapper/0: 1] snd-dbmdx-mach-drv snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card...
[ 1.389064] [7: swapper/0: 1] dbmdx_pcm_platform_probe
[ 1.389341] [7: swapper/0: 1] samsung-abox-gic 14af1000.abox_gic: samsung_abox_gic_probe
[ 1.389435] [7: swapper/0: 1] samsung-abox-gic 14af1000.abox_gic: samsung_abox_gic_probe: probe complete
[ 1.389810] [7: swapper/0: 1] samsung-abox 14a50000.abox: samsung_abox_probe
[ 1.393077] [7: swapper/0: 1] samsung-abox 14a50000.abox: dram firmware(0x00000008fd300000) is mapped on ffffff800e3e9000 with size of 12582912
[ 1.393102] [7: swapper/0: 1] samsung-abox 14a50000.abox: Fault handler is registered for 14a30000.sysmmu_abox
[ 1.393550] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: Direct firmware load for calliope_sram.bin failed with error -2
[ 1.393558] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: Falling back to user helper
[ 1.393640] [7: swapper/0: 1] abox_cpu_enable(0)
[ 1.393652] [7: swapper/0: 1] abox_cpu_power(0)
[ 1.393682] [7: swapper/0: 1] samsung-abox-gic 14af1000.abox_gic: abox_gic_register_irq_handler
[ 1.393767] [7: swapper/0: 1] samsung-abox 14a50000.abox: samsung_abox_probe: probe complete
[ 1.393804] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: abox_runtime_resume
[ 1.393818] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: abox_enable
[ 1.393830] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: abox_request_cpu_gear(00000000ab0cdefa, 3)
[ 1.398158] [7: kworker/7:2: 1770] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz
[ 1.398173] [7: kworker/7:0: 45] abox_cpu_enable(0)
[ 1.398183] [7: kworker/7:0: 45] abox_cpu_power(0)
[ 1.398244] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: audif clock: 24576000
[ 1.398257] [7: kworker/7:0: 45] samsung-abox-gic 14af1000.abox_gic: abox_gic_init_gic
[ 1.398275] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: abox_cfg_gpio(default)
[ 1.398284] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: abox_download_firmware
[ 1.398290] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: SRAM firmware downloading is deferred
[ 1.399694] [6: swapper/0: 1] samsung-abox-debug 14a50000.abox:abox_debug@0: dump buffer(0x00000000e9400000) is mapped on ffffffc069400000 with size of 0x0000000000400000
[ 1.401763] [6: swapper/0: 1] exynos7885-COD3035 sound: exynos7885_audio_probe
[ 1.402256] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_codec_probe
[ 1.402349] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no source widget found for UAIF4 Capture
[ 1.402357] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF4 Capture -> UAIF4 -> SPUSM
[ 1.402538] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no sink widget found for UAIF4 Playback
[ 1.402546] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF SPK4 -> direct -> UAIF4 Playback
[ 1.402557] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no sink widget found for DSIF Playback
[ 1.402567] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route DSIF SPK -> direct -> DSIF Playback
[ 1.402615] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no source widget found for UAIF4 Capture
[ 1.402623] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF4 Capture -> UAIF4 -> NSRC0
[ 1.402651] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no source widget found for UAIF4 Capture
[ 1.402659] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF4 Capture -> UAIF4 -> NSRC1
[ 1.402687] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no source widget found for UAIF4 Capture
[ 1.402695] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF4 Capture -> UAIF4 -> NSRC2
[ 1.402722] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no source widget found for UAIF4 Capture
[ 1.402730] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF4 Capture -> UAIF4 -> NSRC3
[ 1.402964] [6: swapper/0: 1] cod3035x 4-0003: 3035x CODEC_PROBE: (*) cod3035x_codec_probe
[ 1.403176] [6: swapper/0: 1] cod3035x 4-0003: (*) cod3035x_runtime_resume
[ 1.403183] [6: swapper/0: 1] cod3035x 4-0003: (*) cod3035x_enable
[ 1.403194] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_enable_mclk: ABOX_UAIF_CTRL0(ABOX_UAIF2)=00000002
[ 1.403200] [6: swapper/0: 1] cod3035x 4-0003: cod3035x_regulators_enable regulator: 1
[ 1.441570] [6: swapper/0: 1] cod3035x 4-0003: (*)Error in getting Codec-3035 Interrupt gpio
[ 1.441585] [6: swapper/0: 1] cod3035x 4-0003: Bias voltage values: bias1 = 3, bias2= 1, ldo = 3
[ 1.441596] [6: swapper/0: 1] cod3035x 4-0003: cod3035x_i2c_parse_dt : cod3035x->use_det_gdet_adc_mode: 1
[ 1.441603] [6: swapper/0: 1] cod3035x 4-0003: Using GPADC for button detection
[ 1.441762] [6: swapper/0: 1] cod3035x 4-0003: [DEBUG]: buttons: code(226), low(0), high(376)
[ 1.441768] [6: swapper/0: 1] cod3035x 4-0003: [DEBUG]: buttons: code(582), low(377), high(447)
[ 1.441775] [6: swapper/0: 1] cod3035x 4-0003: [DEBUG]: buttons: code(115), low(448), high(627)
[ 1.441782] [6: swapper/0: 1] cod3035x 4-0003: [DEBUG]: buttons: code(114), low(628), high(1161)
[ 1.444031] [7: kworker/u16:2: 241] mmc_host mmc1: Bus speed (slot 0) = 24984375Hz (slot req 300000Hz, actual 297433HZ div = 42)
[ 1.463604] [6: swapper/0: 1] cod3035x 4-0003: cod3035x_codec_initialize called, setting defaults
[ 1.569109] [6: swapper/0: 1] input: Codec3035 Headset Events as /devices/platform/11ce0000.speedy/i2c-4/4-0003/input/input2
[ 1.569338] [6: swapper/0: 1] cod3035x 4-0003: (*) cod3035x_runtime_suspend
[ 1.569346] [6: swapper/0: 1] cod3035x 4-0003: (*) cod3035x_disable
[ 1.569354] [6: swapper/0: 1] cod3035x 4-0003: cod3035x_regulators_disable regulator: 0
[ 1.569367] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_enable_mclk: ABOX_UAIF_CTRL0(ABOX_UAIF2)=00000000
[ 1.569800] [6: kworker/6:0: 40] tfa98xx 8-0034: Direct firmware load for Tfa9872.cnt failed with error -2
[ 1.569809] [6: kworker/6:0: 40] tfa98xx 8-0034: Falling back to user helper
[ 1.569868] [6: swapper/0: 1] tfa98xx_append_i2c_address(): widgets[0].sname=AIF Playback-8-34
[ 1.569875] [6: swapper/0: 1] tfa98xx_append_i2c_address(): widgets[1].sname=AIF Capture-8-34
[ 1.569905] [6: swapper/0: 1] tfa98xx 8-0034: tfa98xx codec registered ()
[ 1.570166] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA0 mapping ok
[ 1.570289] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA1 mapping ok
[ 1.570401] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA2 mapping ok
[ 1.570503] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA3 mapping ok
[ 1.570638] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA4 mapping ok
[ 1.570768] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA5 mapping ok
[ 1.570874] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA6 mapping ok
[ 1.570974] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA7 mapping ok
[ 1.571096] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> WDMA0 mapping ok
[ 1.571207] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> WDMA1 mapping ok
[ 1.571312] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> WDMA2 mapping ok
[ 1.571646] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> WDMA3 mapping ok
[ 1.571751] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> WDMA4 mapping ok
[ 1.571761] [6: swapper/0: 1] cod3035x 4-0003: cod3035x_dai_set_fmt called. fmt: 16385
[ 1.571774] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_uaif_set_fmt[0](0x00001001)
[ 1.571813] [6: swapper/0: 1] exynos7885-COD3035 sound: cod3035x-aif <-> UAIF0 mapping ok
[ 1.571821] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_uaif_set_fmt[1](0x00004001)
[ 1.571856] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> UAIF1 mapping ok
[ 1.571863] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_uaif_set_fmt[2](0x00001001)
[ 1.571893] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> UAIF2 mapping ok
[ 1.571901] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_uaif_set_fmt[3](0x00001001)
[ 1.571933] [6: swapper/0: 1] exynos7885-COD3035 sound: tfa98xx-aif-8-34 <-> UAIF3 mapping ok
[ 1.571962] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> Internal mapping ok
[ 1.571986] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> SPEEDY mapping ok
[ 1.573145] [6: swapper/0: 1] cod3035x 4-0003: ASoC: mux DMICL Mux2 has no paths
[ 1.573156] [6: swapper/0: 1] cod3035x 4-0003: ASoC: mux DMICR Mux2 has no paths
[ 1.573165] [6: swapper/0: 1] cod3035x 4-0003: ASoC: mux ADC DAT Mux0 has no paths
[ 1.573177] [6: swapper/0: 1] cod3035x 4-0003: ASoC: mux ADC DAT Mux1 has no paths
[ 1.573189] [6: swapper/0: 1] cod3035x 4-0003: ASoC: Failed to create DAC debugfs file
[ 1.573200] [6: swapper/0: 1] cod3035x 4-0003: ASoC: Failed to create ADC debugfs file
[ 1.573211] [6: swapper/0: 1] cod3035x 4-0003: ASoC: Failed to create DADC debugfs file
[ 1.574612] [6: swapper/0: 1] exynos7885-COD3035 sound: universal7885_mic_bias_parse_dt
[ 1.574625] [6: swapper/0: 1] exynos7885-COD3035 sound: BIAS: MIC1(0), MIC2(0), MIC3(2), LINEIN(0)
[ 1.574754] [6: swapper/0: 1] GACT probability NOT on
[ 1.574767] [6: swapper/0: 1] Mirror/redirect action on
[ 1.574781] [6: swapper/0: 1] u32 classifier
[ 1.574786] [6: swapper/0: 1] Actions configured
[ 1.574797] [6: swapper/0: 1] Netfilter messages via NETLINK v0.30.
[ 1.574824] [6: swapper/0: 1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.575022] [6: swapper/0: 1] ctnetlink v0.93: registering with nfnetlink.
[ 1.575424] [5: swapper/0: 1] xt_time: kernel timezone is -0000
[ 1.575754] [6: swapper/0: 1] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.575873] [6: swapper/0: 1] arp_tables: (C) 2002 David S. Miller
[ 1.575922] [6: swapper/0: 1] Initializing XFRM netlink socket
[ 1.576192] [6: swapper/0: 1] NET: Registered protocol family 10
[ 1.576967] [6: swapper/0: 1] mip6: Mobile IPv6
[ 1.576988] [6: swapper/0: 1] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.577109] [6: swapper/0: 1] sit: IPv6 over IPv4 tunneling driver
[ 1.577618] [6: swapper/0: 1] fullmesh registered
[ 1.577636] [6: swapper/0: 1] NET: Registered protocol family 17
[ 1.577651] [6: swapper/0: 1] NET: Registered protocol family 15
[ 1.577665] [6: swapper/0: 1] NET: Registered protocol family 35
[ 1.577882] [6: swapper/0: 1] ncm: Network Context Metadata Module: initialized
[ 1.578093] [6: swapper/0: 1] decon: dpp(0) probe start..
[ 1.578100] [6: swapper/0: 1] decon: res: start(0x14851000), end(0x14851fff)
[ 1.578146] [6: swapper/0: 1] decon: dma res: start(0x148b1000), end(0x148b1fff)
[ 1.578154] [6: swapper/0: 1] decon: dma common res: start(0x148b0000), end(0x148b00ff)
[ 1.578162] [6: swapper/0: 1] decon: irq no = 78
[ 1.578196] [6: swapper/0: 1] exynos-dpp 14851000.dpp: Fault handler is registered for 148c0000.sysmmu
[ 1.578202] [6: swapper/0: 1] decon: dpp0 is probed successfully
[ 1.578282] [6: swapper/0: 1] decon: dpp(1) probe start..
[ 1.578288] [6: swapper/0: 1] decon: res: start(0x14852000), end(0x14852fff)
[ 1.578297] [6: swapper/0: 1] decon: dma res: start(0x148b2000), end(0x148b2fff)
[ 1.578305] [6: swapper/0: 1] decon: irq no = 79
[ 1.578330] [6: swapper/0: 1] exynos-dpp 14852000.dpp: Fault handler is registered for 148c0000.sysmmu
[ 1.578336] [6: swapper/0: 1] decon: dpp1 is probed successfully
[ 1.578381] [6: swapper/0: 1] decon: dpp(3) probe start..
[ 1.578388] [6: swapper/0: 1] decon: res: start(0x14853000), end(0x14853fff)
[ 1.578398] [6: swapper/0: 1] decon: dma res: start(0x148b3000), end(0x148b3fff)
[ 1.578410] [6: swapper/0: 1] decon: irq no = 80
[ 1.578433] [6: swapper/0: 1] exynos-dpp 14853000.dpp: Fault handler is registered for 148c0000.sysmmu
[ 1.578440] [6: swapper/0: 1] decon: dpp3 is probed successfully
[ 1.578482] [6: swapper/0: 1] decon: dpp(2) probe start..
[ 1.578490] [6: swapper/0: 1] decon: res: start(0x14854000), end(0x14854fff)
[ 1.578499] [6: swapper/0: 1] decon: dma res: start(0x148b4000), end(0x148b4fff)
[ 1.578510] [6: swapper/0: 1] decon: irq no = 81
[ 1.578529] [6: swapper/0: 1] decon: dpp irq no = 82
[ 1.578552] [6: swapper/0: 1] exynos-dpp 14854000.dpp: Fault handler is registered for 148c0000.sysmmu
[ 1.578559] [6: swapper/0: 1] decon: dpp2 is probed successfully
[ 1.579476] [6: swapper/0: 1] Registered cp15_barrier emulation handler
[ 1.579495] [6: swapper/0: 1] Registered setend emulation handler
[ 1.579689] [7: swapper/0: 1] HMP: down-migration compensation initialized
[ 1.579699] [7: swapper/0: 1] HMP: tbsoftlanding: base threshold:107, timeout: 30
[ 1.579705] [7: swapper/0: 1] HMP: tbsoftlanding: lv:0, freq: 1500000, threshold: 177
[ 1.579710] [7: swapper/0: 1] HMP: tbsoftlanding: lv:1, freq: 1000000, threshold: 142
[ 1.579715] [7: swapper/0: 1] HMP: tbsoftlanding: lv:2, freq: 800000, threshold: 107
[ 1.581318] [7: swapper/0: 1] registered taskstats version 1
[ 1.581559] [7: swapper/0: 1] zswap: loaded using pool lz4/zsmalloc
[ 1.581991] [6: swapper/0: 1] Key type encrypted registered
[ 1.582222] [6: swapper/0: 1] dsim: dsim(0) probe start..
[ 1.582283] [6: swapper/0: 1] dsim: LCD(/s6e3fa7_fhd) resolution: xres(1080), yres(2220)
[ 1.582292] [6: swapper/0: 1] dsim: mic enabled (0)
[ 1.582299] [6: swapper/0: 1] dsim: dsc is disabled
[ 1.582306] [6: swapper/0: 1] dsim: using data lane count(4)
[ 1.582312] [6: swapper/0: 1] dsim: cmd_underrun_lp_ref(2498)
[ 1.582317] [6: swapper/0: 1] dsim: res: start(0x14870000), end(0x148700ff)
[ 1.582363] [6: swapper/0: 1] dsim: dsim irq (83)
[ 1.582554] [6: swapper/0: 1] dsim: dsim_get_data_lanes: lanes(0x1f)
[ 1.582560] [6: swapper/0: 1] dsim: + dsim_enable
[ 1.582572] [6: swapper/0: 1] dsim: dsim_set_panel_power_early +
[ 1.582581] [6: swapper/0: 1] decon_board: 609: find_list: dsim_set_panel_power_early is not exist, so create it
[ 1.582588] [6: swapper/0: 1] decon_board: 624: run_list: dsim_set_panel_power_early is empty, so make list
[ 1.582657] [6: swapper/0: 1] decon_board: 395: make_list: dsim_set_panel_power_early node does not exist, so create dummy
[ 1.582662] [6: swapper/0: 1] decon_board: 202: print_action: [ 0] unknown idx
[ 1.582669] [6: swapper/0: 1] dsim: dsim_set_panel_power_early -
[ 1.582675] [6: swapper/0: 1] dsim: dsim_set_panel_power: 1
[ 1.582681] [6: swapper/0: 1] decon_board: 609: find_list: dsim_set_panel_power_enable is not exist, so create it
[ 1.582686] [6: swapper/0: 1] decon_board: 624: run_list: dsim_set_panel_power_enable is empty, so make list
[ 1.582720] [6: swapper/0: 1] decon_board: 343: check_dt: gpio: 2, regulator: 0, delay: 4, pinctrl: 0, timer: 0
[ 1.594921] [6: swapper/0: 1] dsim: dsim0 PLL is stabled in bootloader, so skip DSIM link/DPHY init.
[ 1.594935] [6: swapper/0: 1] dsim: - dsim_enable
[ 1.595042] [6: swapper/0: 1] lcd panel: s6e3fa7_probe
[ 1.595083] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: 4, ret: 3
[ 1.595176] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: c8, ret: 47
[ 1.595217] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: a1, ret: 4
[ 1.595259] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: d6, ret: 5
[ 1.595323] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: b5, ret: 24
[ 1.595383] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: c9, ret: 21
[ 1.595458] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: b3, ret: 34
[ 1.595530] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: b8, ret: 33
[ 1.595664] [6: swapper/0: 1] Dynamic Aid Finished !
[ 1.595716] [6: swapper/0: 1] Dynamic Aid Finished !
[ 1.595744] [6: swapper/0: 1] lcd panel: elvss: 140ddc19
[ 1.595755] [6: swapper/0: 1] lcd panel: acl: 504d5002, brightness: 128, adaptive_control: 1
[ 1.595768] [6: swapper/0: 1] lcd panel: vint: 23
[ 1.595779] [6: swapper/0: 1] lcd panel: brightness: 128, bl: 53, nit: 183, lx: -1
[ 1.595785] [6: swapper/0: 1] lcd panel: s6e3fa7_probe: done
[ 1.595818] [6: swapper/0: 1] lcd panel: lcd_init_svc: /devices/svc
[ 1.595892] [6: swapper/0: 1] dpui_logging_register register type MDNIE
[ 1.595920] [6: swapper/0: 1] mdnie mdnie: AUTO_UI
[ 1.595925] [6: swapper/0: 1] mdnie mdnie: registered successfully
[ 1.595930] [6: swapper/0: 1] dpui_logging_register register type PANEL
[ 1.595936] [6: swapper/0: 1] lcd panel: s6e3fa7_register_notifier
[ 1.595941] [6: swapper/0: 1] lcd panel: s6e3fa7_a7y18_lcd_ctrl.c: dsim_panel_probe: done
[ 1.595949] [6: swapper/0: 1] dsim: dsim0 driver(cmd mode) has been probed.
[ 1.596326] [6: swapper/0: 1] exynos-decon 14860000.decon_f: decon_probe start
[ 1.596518] [6: swapper/0: 1] decon: decon-f: max win4, command mode, hw trigger
[ 1.596524] [6: swapper/0: 1] decon: dsi mode(0). 0: SINGLE 1: DUAL
[ 1.596531] [6: swapper/0: 1] decon: out type(0). 0: DSI 1: DISPLAYPORT 2: HDMI 3: WB
[ 1.596537] [6: swapper/0: 1] decon: out idx(0). 0: DSI0 1: DSI1 2: DSI2
[ 1.596666] [6: swapper/0: 1] decon: This board doesn't support TE GPIO of 2nd LCD
[ 1.596684] [6: swapper/0: 1] decon: decon_register_ext_irq: gpio(202)
[ 1.597196] [6: swapper/0: 1] decon: lcd_info: hfp 2 hbp 2 hsa 2 vfp 3 vbp 15 vsa 1
[ 1.597206] [6: swapper/0: 1] decon: xres 1080 yres 2220
[ 1.597213] [6: swapper/0: 1] decon: default_win 3 win_idx 0 xres 1080 yres 2220
[ 1.597220] [6: swapper/0: 1] decon: default_win 3 win_idx 1 xres 1080 yres 2220
[ 1.597227] [6: swapper/0: 1] decon: default_win 3 win_idx 2 xres 1080 yres 2220
[ 1.597232] [6: swapper/0: 1] decon: decon_fb_alloc_memory +
[ 1.597240] [6: swapper/0: 1] exynos-decon 14860000.decon_f: allocating memory for display
[ 1.597247] [6: swapper/0: 1] exynos-decon 14860000.decon_f: real_size=2397600 (1080.2220), virt_size=4795200 (1080.4440)
[ 1.597252] [6: swapper/0: 1] exynos-decon 14860000.decon_f: want 19181568 bytes for window[3]
[ 1.604387] [6: swapper/0: 1] exynos-decon 14860000.decon_f: alloated memory
[ 1.604398] [6: swapper/0: 1] exynos-decon 14860000.decon_f: fb start addr = 0x10000000
[ 1.604405] [6: swapper/0: 1] decon: decon_fb_alloc_memory -
[ 1.604411] [6: swapper/0: 1] decon: default_win 3 win_idx 3 xres 1080 yres 2220
[ 1.604698] [6: swapper/0: 1] decon: window update is enabled: win rectangle w(360), h(222)
[ 1.604704] [6: swapper/0: 1] decon: horizontal count(3), vertical count(10)
[ 1.604940] [6: swapper/0: 1] decon: decon_reg_init already called by BOOTLOADER
[ 1.604992] [6: swapper/0: 1] exynos-decon 14860000.decon_f: pm_stay_awake
[ 1.604998] [6: swapper/0: 1] decon: decon_probe: lcdtype: 810543
[ 1.605005] [6: swapper/0: 1] decon: decon_abd_register: ++
[ 1.605017] [6: swapper/0: 1] decon: decon_abd_register_function: found gpio_pcd(12) success
[ 1.605039] [6: swapper/0: 1] decon: decon_abd_register_function: pcd is active low, falling
[ 1.605076] [6: swapper/0: 1] decon: decon_abd_register_function: found gpio_det(7) success
[ 1.605084] [6: swapper/0: 1] decon: decon_abd_register_function: det is active low, falling
[ 1.605111] [6: swapper/0: 1] decon: decon_abd_register_function: found gpio_err(15) success
[ 1.605120] [6: swapper/0: 1] decon: decon_abd_register_function: err is active low, falling
[ 1.605159] [6: swapper/0: 1] decon: decon_abd_register: -- 3 entity was registered
[ 1.605167] [6: swapper/0: 1] decon: decon_abd_enable_interrupt: on: 1, pcd(203) level: 1, count: 0, state: 0
[ 1.605179] [6: swapper/0: 1] decon: decon_abd_enable_interrupt: on: 1, det(204) level: 1, count: 0, state: 0
[ 1.605189] [6: swapper/0: 1] decon: decon_abd_enable_interrupt: on: 1, err(205) level: 1, count: 0, state: 0
[ 1.605198] [6: swapper/0: 1] decon: decon0 registered successfully
[ 1.605460] [6: swapper/0: 1] [MUIC] muic_notifier_register: listener=6 register
[ 1.610982] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-dispaud's Runtime_Resume
[ 1.610997] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-dispaud's Runtime_Suspend
[ 1.611181] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-mfcmscl's Runtime_Resume
[ 1.611189] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-mfcmscl's Runtime_Suspend
[ 1.611398] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-isp's Runtime_Resume
[ 1.611406] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-isp's Runtime_Suspend
[ 1.611643] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-cam's Runtime_Resume
[ 1.611650] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-cam's Runtime_Suspend
[ 1.612602] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-g3d's Runtime_Resume
[ 1.612610] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-g3d's Runtime_Suspend
[ 1.616756] [5: kworker/u16:3: 413] cis_2p6_probe sensor id 0
[ 1.616774] [5: kworker/u16:3: 413] sensor peri is not yet probed
[ 1.616895] [5: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1
[ 1.616908] [5: kworker/u16:3: 413] sensor peri is not yet probed
[ 1.616999] [5: kworker/u16:3: 413] cis_sr846_probe sensor id 2
[ 1.617011] [7: kworker/u16:3: 413] sensor peri is not yet probed
[ 1.617572] [7: kworker/u16:3: 413] sec-thermistor sec_thermistor@0: sec-ap-thermistor successfully probed.
[ 1.617855] [7: kworker/u16:3: 413] sec-thermistor sec_thermistor@6: sec-wf-thermistor successfully probed.
[ 1.618048] [7: kworker/u16:3: 413] exynos-tmu 10070000.BIG: thermal zone use hotplug function
[ 1.618271] [7: kworker/u16:3: 413] thermal_zone_of_sensor_register 551 thermal zone_name = BIG
[ 1.618282] [7: kworker/u16:3: 413] exynos-tmu 10070000.BIG: Trip count parsed from ECT : 8, zone : BIG
[ 1.618290] [7: kworker/u16:3: 413] Parsed From ECT : [0] Temperature : 20, frequency : 2184000, level = 0
[ 1.618298] [7: kworker/u16:3: 413] Parsed From ECT : [1] Temperature : 76, frequency : 1768000, level = 4
[ 1.618305] [7: kworker/u16:3: 413] Parsed From ECT : [2] Temperature : 81, frequency : 1768000, level = 4
[ 1.618313] [7: kworker/u16:3: 413] Parsed From ECT : [3] Temperature : 86, frequency : 1560000, level = 6
[ 1.618319] [7: kworker/u16:3: 413] Parsed From ECT : [4] Temperature : 91, frequency : 728000, level = 9
[ 1.618323] [7: kworker/u16:3: 413] Parsed From ECT : [5] Temperature : 96, frequency : 728000, level = 9
[ 1.618328] [7: kworker/u16:3: 413] [ECT]hotplug_threshold : 96
[ 1.618333] [7: kworker/u16:3: 413] [ECT]hotplug_in_threshold : 91
[ 1.618337] [7: kworker/u16:3: 413] [ECT]hotplug_out_threshold : 96
[ 1.618343] [7: kworker/u16:3: 413] Parsed From ECT : [6] Temperature : 101, frequency : 728000, level = 9
[ 1.618348] [7: kworker/u16:3: 413] Parsed From ECT : [7] Temperature : 115, frequency : 728000, level = 9
[ 1.618357] [7: kworker/u16:3: 413] exynos-tmu 10070000.BIG: Sensor number = 0
[ 1.618781] [7: kworker/u16:3: 413] thermal_zone_of_sensor_register 551 thermal zone_name = LITTLE
[ 1.618792] [7: kworker/u16:3: 413] exynos-tmu 10070000.LITTLE: Trip count parsed from ECT : 8, zone : LITTLE
[ 1.618802] [7: kworker/u16:3: 413] Parsed From ECT : [0] Temperature : 20, frequency : 1586000, level = 0
[ 1.618811] [7: kworker/u16:3: 413] Parsed From ECT : [1] Temperature : 76, frequency : 1586000, level = 0
[ 1.618819] [7: kworker/u16:3: 413] Parsed From ECT : [2] Temperature : 81, frequency : 1586000, level = 0
[ 1.618824] [7: kworker/u16:3: 413] Parsed From ECT : [3] Temperature : 86, frequency : 1352000, level = 2
[ 1.618829] [7: kworker/u16:3: 413] Parsed From ECT : [4] Temperature : 91, frequency : 1144000, level = 4
[ 1.618834] [7: kworker/u16:3: 413] Parsed From ECT : [5] Temperature : 96, frequency : 902000, level = 6
[ 1.618839] [7: kworker/u16:3: 413] Parsed From ECT : [6] Temperature : 101, frequency : 208000, level = 11
[ 1.618845] [7: kworker/u16:3: 413] Parsed From ECT : [7] Temperature : 115, frequency : 208000, level = 11
[ 1.618854] [7: kworker/u16:3: 413] exynos-tmu 10070000.LITTLE: Sensor number = 0
[ 1.619055] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: [GPU TMU] index : 0, frequency : 1100000
[ 1.619062] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: [GPU TMU] index : 1, frequency : 845000
[ 1.619071] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: [GPU TMU] index : 2, frequency : 676000
[ 1.619077] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: [GPU TMU] index : 3, frequency : 450000
[ 1.619084] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: [GPU TMU] index : 4, frequency : 343000
[ 1.619296] [7: kworker/u16:3: 413] thermal_zone_of_sensor_register 551 thermal zone_name = G3D
[ 1.619305] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: Trip count parsed from ECT : 8, zone : G3D
[ 1.619312] [7: kworker/u16:3: 413] Parsed From ECT : [0] Temperature : 20, frequency : 1100000, level = 0
[ 1.619317] [7: kworker/u16:3: 413] Parsed From ECT : [1] Temperature : 76, frequency : 1100000, level = 0
[ 1.619324] [7: kworker/u16:3: 413] Parsed From ECT : [2] Temperature : 81, frequency : 1100000, level = 0
[ 1.619331] [7: kworker/u16:3: 413] Parsed From ECT : [3] Temperature : 86, frequency : 845000, level = 1
[ 1.619336] [7: kworker/u16:3: 413] Parsed From ECT : [4] Temperature : 91, frequency : 676000, level = 2
[ 1.619341] [7: kworker/u16:3: 413] Parsed From ECT : [5] Temperature : 96, frequency : 450000, level = 3
[ 1.619346] [7: kworker/u16:3: 413] Parsed From ECT : [6] Temperature : 101, frequency : 343000, level = 4
[ 1.619351] [7: kworker/u16:3: 413] Parsed From ECT : [7] Temperature : 115, frequency : 343000, level = 4
[ 1.619359] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: Sensor number = 0
[ 1.619792] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_platform_probe: DBMDX codec driver version = 4.031
[ 1.619809] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA feature activated
[ 1.619820] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: Multi Interface Probe is not supported
[ 1.619828] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using device-tree VA firmware name: dbmd4_va_fw.bin
[ 1.619836] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using default VA preboot firmware name: dbmd4_va_preboot_fw.bin
[ 1.619844] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: no buffering_timeout, setting to 200
[ 1.619852] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using min_samples_chunk_size of 128
[ 1.619858] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using max_detection_buffer_size of 0
[ 1.619863] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: no va buffering pcm rate, setting to 16000
[ 1.619870] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using 13 VA configuration values from dev-tree
[ 1.619876] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000000: 0x80000000
[ 1.619882] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000001: 0x80000000
[ 1.619887] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000002: 0x80000000
[ 1.619892] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000003: 0x80290020
[ 1.619899] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000004: 0x802210e0
[ 1.619904] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000005: 0x80158e8e
[ 1.619909] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000006: 0x801b0020
[ 1.619914] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000007: 0x801a0011
[ 1.619920] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000008: 0x80230001
[ 1.619926] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000009: 0x80108017
[ 1.619932] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000a: 0x80000000
[ 1.619937] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000b: 0x80000000
[ 1.619942] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000c: 0x80000000
[ 1.619949] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using 3 VA mic configuration values from device-tree
[ 1.619956] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000000: 0x0000f041
[ 1.619962] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000001: 0x00001044
[ 1.619967] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000002: 0x00000008
[ 1.619974] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA default mic config: 0x00000000
[ 1.619981] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using backlog length of 1300 from device-tree
[ 1.619989] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using OKG backlog length of 1000 from device-tree
[ 1.619999] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using 3 VA speed configuration values from device-tree
[ 1.620007] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000000: 0x00000000 460800 0 960000
[ 1.620013] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000001: 0x00000000 2000000 0 4800000
[ 1.620020] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000002: 0x00000000 3000000 0 4800000
[ 1.620028] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: no wakeup_disabled definition in dev-tree
[ 1.620034] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using use_gpio_for_wakeup of 1 from dev-tree
[ 1.620041] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: no send_wakeup_seq definition in device-tree
[ 1.620048] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using wakeup_set_value of 0 from device-tree
[ 1.620054] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using firmware_id of 0x dbd4 from device-tree
[ 1.620065] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: using dbmdx_master_clk at 32768HZ from device-tree
[ 1.620075] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no dbmdx_master_clk definition in device-tree
[ 1.620087] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no constant-clk-rate definition in device-tree
[ 1.620094] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no dbmdx_constant_clk definition in device-tree
[ 1.620195] [7: kworker/u16:3: 413] dbmdx supply dbmdx_regulator not found, using dummy regulator
[ 1.620348] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_common_probe: missing or invalid d2 strap1 gpio: -2
[ 1.620436] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_resources
[ 1.620562] [7: kworker/u16:3: 413] wake enabled for irq 201
[ 1.620784] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_dai_drivers: num DAIs: 1
[ 1.620867] [6: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_common_probe: registered DBMDX codec driver version = 4.031
[ 1.620873] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_request_and_load_fw VA/-
[ 1.620885] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move BOOTING -> BOOTING (00 -> 00)
[ 1.620894] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved BOOTING -> BOOTING (00 -> 00)
[ 1.620900] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_request_and_load_fw: request VA firmware - dbmd4_va_fw.bin
[ 1.620907] [6: kworker/u16:3: 413] samsung-abox 14a50000.abox: dbmdx_remote_add_codec_controls start
[ 1.620946] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: Direct firmware load for dbmd4_va_fw.bin failed with error -2
[ 1.620952] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: Falling back to user helper
[ 1.620969] [6: kworker/u16:3: 413] samsung-abox 14a50000.abox: dbmdx_remote_add_codec_controls: 10 VA controls added
[ 1.620975] [6: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_platform_probe: successfully probed
[ 1.621135] [6: kworker/u16:3: 413] snd-dbmdx-mach-drv snd-dbmdx-mach-drv: dbmdx_snd_probe:
[ 1.621346] [6: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_dev_probe: 10 VA controls registered
[ 1.621353] [6: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_dev_probe: success
[ 1.621370] [6: kworker/u16:3: 413] dbmdx_pcm_probe
[ 1.621420] [6: kworker/u16:3: 413] dbmdx_pcm_new
[ 1.621427] [6: kworker/u16:3: 413] dbmdx_pcm_preallocate_dma_buffer
[ 1.621655] [6: kworker/u16:3: 413] snd-dbmdx-mach-drv snd-dbmdx-mach-drv: DBMDX_codec_dai <-> DBMDX_codec_dai mapping ok
[ 1.621702] [7: kworker/u16:2: 241] dbmdx-codec dbmdx: dbmdx_set_bias_level: level 1
[ 1.621709] [7: kworker/u16:2: 241] dbmdx-codec dbmdx: dbmdx_set_bias_level: level 2
[ 1.621736] [6: kworker/u16:0: 6] dbmdx-codec dbmdx: dbmdx_set_bias_level: level 3
[ 1.622125] [5: kworker/u16:3: 413] snd-dbmdx-mach-drv snd-dbmdx-mach-drv: dbmdx_snd_probe: DBMDX ASoC card registered
[ 1.622275] [5: kworker/u16:3: 413] cis_2p6_probe sensor id 0
[ 1.622289] [5: kworker/u16:3: 413] sensor peri is not yet probed
[ 1.622403] [5: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1
[ 1.622417] [5: kworker/u16:3: 413] sensor peri is not yet probed
[ 1.622511] [5: kworker/u16:3: 413] cis_sr846_probe sensor id 2
[ 1.622526] [6: swapper/0: 1] sensor peri is not yet probed
[ 1.622781] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt: usb30_redriver_en: Invalied gpio pins
[ 1.622787] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt, gpios_redriver_en -2
[ 1.622793] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt, can_disable_usb 1
[ 1.622798] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt - get hs_vdd error
[ 1.622803] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt - get ss_vdd error
[ 1.622807] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt - get dp_vdd error
[ 1.622812] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt, usb_ldocontrol 0
[ 1.622817] [6: swapper/0: 1] usb_notify: registered otg_notify +
[ 1.622925] [6: swapper/0: 1] usb_notify: ovc_init
[ 1.623006] [6: swapper/0: 1] usb_notify: register_usblog_proc already registered
[ 1.623011] [6: swapper/0: 1] usb_notify: registered otg_notify -
[ 1.623016] [6: swapper/0: 1] usb: [M] manager_notifier_register: listener=22 register
[ 1.623022] [6: swapper/0: 1] usb: [M] manager_notifier_register USB: attach=0, drp=USB_DETACH
[ 1.623027] [6: swapper/0: 1] usb_notifier: ccic_usb_handle_notification: Turn Off Device(UFP)
[ 1.623033] [6: swapper/0: 1] usb_notify: send_otg_notify event=vbus(1) enable=0
[ 1.623038] [6: swapper/0: 1] usb_notify: send_otg_notify reserve event
[ 1.623043] [6: swapper/0: 1] vbus_notifier_register: listener=2 register
[ 1.623049] [6: swapper/0: 1] usb_notifier: vbus_handle_notification cmd=1, vbus_type=LOW
[ 1.623055] [6: swapper/0: 1] usb_notify: send_otg_notify event=vbus_power(25) enable=0
[ 1.623060] [6: swapper/0: 1] usb_notify: extra_notifier_callback event=vbus_power(25)
[ 1.623065] [6: swapper/0: 1] usb_notify: extra_notify_state+ event=vbus_power(25), enable=off
[ 1.623071] [6: swapper/0: 1] usb_notify: extra_notify_state- event=vbus_power(25), cable=none
[ 1.623077] [6: swapper/0: 1] usb_notifier usb_notifier: usb notifier probe
[ 1.623153] [7: kworker/u16:3: 413] cis_2p6_probe sensor id 0
[ 1.623156] [6: swapper/0: 1] usb: [M] manager_notifier_init
[ 1.623161] [6: swapper/0: 1] manager_notifier_init already registered
[ 1.623168] [7: kworker/u16:3: 413] sensor peri is not yet probed
[ 1.623228] [7: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1
[ 1.623233] [7: kworker/u16:3: 413] sensor peri is not yet probed
[ 1.623273] [7: kworker/u16:3: 413] cis_sr846_probe sensor id 2
[ 1.623277] [6: swapper/0: 1] sensor peri is not yet probed
[ 1.623720] [6: swapper/0: 1] input: gpio_keys as /devices/platform/gpio_keys/input/input3
[ 1.623973] [7: kworker/u16:3: 413] cis_2p6_probe sensor id 0
[ 1.623980] [7: kworker/u16:3: 413] sensor peri is not yet probed
[ 1.624039] [7: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1
[ 1.624044] [7: kworker/u16:3: 413] sensor peri is not yet probed
[ 1.624084] [7: kworker/u16:3: 413] cis_sr846_probe sensor id 2
[ 1.624089] [7: swapper/0: 1] sensor peri is not yet probed
[ 1.624419] [7: swapper/0: 1] input: flip_cover as /devices/platform/flip_cover/input/input4
[ 1.624751] [5: kworker/u16:3: 413] cis_2p6_probe sensor id 0
[ 1.624766] [5: kworker/u16:3: 413] sensor peri is not yet probed
[ 1.624874] [5: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1
[ 1.624887] [5: kworker/u16:3: 413] sensor peri is not yet probed
[ 1.624980] [5: kworker/u16:3: 413] cis_sr846_probe sensor id 2
[ 1.624994] [7: swapper/0: 1] sensor peri is not yet probed
[ 1.625991] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: s2m_rtc_read_time: 2017-01-28 08:26:33(0x40)AM
[ 1.626100] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: setting system clock to 2017-01-28 08:26:33 UTC (1485591993)
[ 1.626619] [7: swapper/0: 1] [@][1][FRT:D] fimc_is_csi_probe(0)
[ 1.626733] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ss0(101) is created
[ 1.626836] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc0(210) is created
[ 1.626898] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc1(211) is created
[ 1.626975] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc2(212) is created
[ 1.627038] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc3(213) is created
[ 1.627047] [7: swapper/0: 1] [@][0][SEN:D] fimc_is_sensor_probe(0)
[ 1.627185] [4: kworker/u16:3: 413] cis_2p6_probe sensor id 0
[ 1.627203] [4: kworker/u16:3: 413] cis_2p6_probe f-number 170
[ 1.627225] [4: kworker/u16:3: 413] cis_2p6_probe setfile_B for PDAF
[ 1.627237] [4: kworker/u16:3: 413] cis_2p6_probe done
[ 1.627278] [7: swapper/0: 1] [@][0][FRT:D] fimc_is_csi_probe(0)
[ 1.627337] [4: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1
[ 1.627351] [4: kworker/u16:3: 413] cis_3p8sp_probe f-number 190
[ 1.627365] [4: kworker/u16:3: 413] cis_3p8sp_probe setfile_B for PDAF
[ 1.627379] [4: kworker/u16:3: 413] cis_3p8sp_probe done
[ 1.627448] [4: kworker/u16:3: 413] cis_sr846_probe sensor id 2
[ 1.627453] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ss1(102) is created
[ 1.627465] [7: swapper/0: 1] sensor peri is not yet probed
[ 1.627664] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc0(214) is created
[ 1.627834] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc1(215) is created
[ 1.627897] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc2(216) is created
[ 1.627951] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc3(217) is created
[ 1.627960] [7: swapper/0: 1] [@][1][SEN:D] fimc_is_sensor_probe(0)
[ 1.628168] [5: kworker/u16:3: 413] cis_sr846_probe sensor id 2
[ 1.628186] [7: swapper/0: 1] sensor peri is not yet probed
[ 1.628350] [7: swapper/0: 1] [@][2][FRT:D] fimc_is_csi_probe(0)
[ 1.628527] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ss2(103) is created
[ 1.628703] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc0(218) is created
[ 1.628763] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc1(219) is created
[ 1.628911] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc2(220) is created
[ 1.628973] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc3(221) is created
[ 1.628981] [7: swapper/0: 1] [@][2][SEN:D] fimc_is_sensor_probe(0)
[ 1.629180] [5: kworker/u16:3: 413] cis_sr846_probe sensor id 2
[ 1.629201] [5: kworker/u16:3: 413] cis_sr846_probe f-number 190
[ 1.629215] [5: kworker/u16:3: 413] cis_sr846_probe : setfile_B
[ 1.629224] [7: swapper/0: 1] [@][ERR]fimc_is_sensor_parse_dt:313:id read is fail(-22)
[ 1.629235] [7: swapper/0: 1] [@][ERR]fimc_is_sensor_probe:1320:parsing device tree is fail(-22)
[ 1.629245] [7: swapper/0: 1] [@][-1][SEN:D] fimc_is_sensor_probe(-22)
[ 1.629256] [7: swapper/0: 1] exynos-fimc-is-sensor: probe of 14430000.fimc_is_sensor failed with error -22
[ 1.629268] [5: kworker/u16:3: 413] cis_sr846_probe done
[ 1.629578] [7: swapper/0: 1] s610-radio 14ac0000.fm: >>> start FM Radio probe
[ 1.629650] [7: swapper/0: 1] exynos_pmu_shared_reg_enable) need_delay = 1, usage_cnt = 1, CP_WAKEUP = 1, CP_STAT = 0x01, EXT_REGULATOR_SHARED_STATUS: 0x00090000, CALLER = s610_radio_probe
[ 1.629729] [7: swapper/0: 1] s610-radio 14ac0000.fm: Enable elna_gpio control
[ 1.640988] [7: swapper/0: 1] s610-radio 14ac0000.fm: fm_ds_set: DS set: 0x0h, reg val: 0x6eh
[ 1.641226] [7: swapper/0: 1] s610-radio 14ac0000.fm: fmspeedy_set_reg_core(), Fail addr:0xfff255h, data:0x4300308h
[ 1.641496] [7: swapper/0: 1] s610-radio 14ac0000.fm: fmspeedy_get_reg_core(), Fail addr:0xfff399h
[ 1.641568] [7: swapper/0: 1] s610-radio 14ac0000.fm: >>> FM version: DEMOD[FFFFFFFF]ANA[30100]PMU[30100]SCG[30100]SPY[30100]TOP[30100]DS[0]BUILD[00BD7639]
[ 1.641804] [7: swapper/0: 1] s610-radio 14ac0000.fm: fmspeedy_set_reg_field_core(), Fail addr:0xfff221h, data:0x1h, cnt:100
[ 1.641823] [7: swapper/0: 1] s610-radio 14ac0000.fm: fm_aux_pll_off():PLL_CLK_EN[01]
[ 1.641831] [7: swapper/0: 1] s610-radio 14ac0000.fm: iClk Aux: 1
[ 1.641843] [7: swapper/0: 1] s610-radio 14ac0000.fm: volume select num: 16
[ 1.641851] [7: swapper/0: 1] s610-radio 14ac0000.fm: volume -3dB: 0
[ 1.641858] [7: swapper/0: 1] s610-radio 14ac0000.fm: rssi_est_on: 0
[ 1.641865] [7: swapper/0: 1] s610-radio 14ac0000.fm: sw_mute_weak: 0
[ 1.641870] [7: swapper/0: 1] s610-radio 14ac0000.fm: without eLNA: 0
[ 1.641877] [7: swapper/0: 1] s610-radio 14ac0000.fm: rssi adjust: 0
[ 1.641900] [7: swapper/0: 1] s610-radio 14ac0000.fm: end FM probe.
[ 1.642398] [7: swapper/0: 1] exynos-mmc-srpmb mmc-srpmb: srpmb dma addr: virt(ffffff80103f0000), phy(8fe010000)
[ 1.642908] [6: swapper/0: 1] exynos-fmp fmp: Exynos FMP Version: 1.3.2
[ 1.643619] [6: swapper/0: 1] exynos-fmp fmp: Found partno 25 for FMP test
[ 1.647226] [6: swapper/0: 1] exynos-fmp fmp: FIPS: self-tests for FMP aes-xts passed
[ 1.649790] [6: swapper/0: 1] exynos-fmp fmp: FIPS: self-tests for FMP aes-cbc passed
[ 1.649806] [6: swapper/0: 1] exynos-fmp fmp: FIPS: self-tests for FMP sha256 passed
[ 1.649864] [6: swapper/0: 1] exynos-fmp fmp: FIPS: self-tests for UFSFMP hmac(sha256) passed
[ 1.649870] [6: swapper/0: 1] exynos-fmp fmp: exynos_fmp_fips_init: self-tests for FMP passed
[ 1.691112] [6: swapper/0: 1] FIPS(do_fmp_integrity_check): Integrity Check Passed
[ 1.691127] [6: swapper/0: 1] exynos-fmp fmp: exynos_fmp_fips_init: integrity check for FMP passed
[ 1.691172] [6: swapper/0: 1] exynos-fmp fmp: exynos_fmp_probe: Exynos FMP driver is proved
[ 1.695686] [6: swapper/0: 1] sec-battery battery: sec_battery_probe: SEC Battery Driver Loading
[ 1.695820] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(0) INPUT(1800) CHARGING(2100)
[ 1.695827] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(1) INPUT(500) CHARGING(500)
[ 1.695834] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(2) INPUT(1000) CHARGING(1000)
[ 1.695842] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(3) INPUT(1800) CHARGING(2100)
[ 1.695849] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(4) INPUT(500) CHARGING(500)
[ 1.695854] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(5) INPUT(1500) CHARGING(1500)
[ 1.695858] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(6) INPUT(1650) CHARGING(2150)
[ 1.695863] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(7) INPUT(1650) CHARGING(2150)
[ 1.695867] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(8) INPUT(1650) CHARGING(2150)
[ 1.695872] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(9) INPUT(1650) CHARGING(2150)
[ 1.695877] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(10) INPUT(900) CHARGING(1200)
[ 1.695882] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(11) INPUT(650) CHARGING(1200)
[ 1.695887] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(12) INPUT(900) CHARGING(1200)
[ 1.695892] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(13) INPUT(700) CHARGING(1200)
[ 1.695897] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(14) INPUT(900) CHARGING(1200)
[ 1.695902] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(15) INPUT(900) CHARGING(1200)
[ 1.695907] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(16) INPUT(650) CHARGING(1200)
[ 1.695912] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(17) INPUT(1800) CHARGING(2100)
[ 1.695916] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(18) INPUT(1800) CHARGING(2100)
[ 1.695922] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(19) INPUT(500) CHARGING(500)
[ 1.695927] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(20) INPUT(1800) CHARGING(2100)
[ 1.695933] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(21) INPUT(500) CHARGING(500)
[ 1.695938] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(22) INPUT(500) CHARGING(500)
[ 1.695943] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(23) INPUT(500) CHARGING(500)
[ 1.695948] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(24) INPUT(1000) CHARGING(450)
[ 1.695953] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(25) INPUT(1000) CHARGING(1000)
[ 1.695958] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(26) INPUT(2000) CHARGING(1800)
[ 1.695964] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(27) INPUT(900) CHARGING(1200)
[ 1.695968] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(28) INPUT(650) CHARGING(1200)
[ 1.695974] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(29) INPUT(500) CHARGING(1200)
[ 1.695978] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(30) INPUT(500) CHARGING(500)
[ 1.695984] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(31) INPUT(1800) CHARGING(2100)
[ 1.695989] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(32) INPUT(1800) CHARGING(2100)
[ 1.695994] [6: swapper/0: 1] sec_bat_parse_dt : TOPOFF_1ST(300), TOPOFF_2ND(150)
[ 1.696035] [6: swapper/0: 1] sec_bat_parse_dt : battery_full_capacity : 3000
[ 1.696050] [6: swapper/0: 1] sec_bat_parse_dt : set cisd_alg_index : 7
[ 1.696074] [6: swapper/0: 1] sec_bat_parse_dt: Wireless charger name is Empty
[ 1.696152] [6: swapper/0: 1] sec_bat_parse_dt : usb_thermal_source is Empty
[ 1.696161] [6: swapper/0: 1] sec_bat_parse_dt : wpc_thermal_source is Empty
[ 1.696172] [6: swapper/0: 1] sec_bat_parse_dt : coil_thermal_source is Empty
[ 1.696181] [6: swapper/0: 1] sec_bat_parse_dt : slave_thermal_source is Empty
[ 1.696191] [6: swapper/0: 1] sec_bat_parse_dt : slave_chg_temp_check is Empty
[ 1.696202] [6: swapper/0: 1] sec_bat_parse_dt : chg_12v_high_temp is Empty
[ 1.696226] [6: swapper/0: 1] sec_bat_parse_dt : wpc_temp_check is Empty
[ 1.696278] [6: swapper/0: 1] sec_bat_parse_dt : pre_afc_work_delay is Empty
[ 1.696287] [6: swapper/0: 1] sec_bat_parse_dt : pre_wc_afc_input_current is Empty
[ 1.696296] [6: swapper/0: 1] sec_bat_parse_dt : pre_wc_afc_work_delay is Empty
[ 1.696333] [6: swapper/0: 1] sec_bat_parse_dt : HIGHLIMIT_THRESHOLD_NOLMAL(800), HIGHLIMIT_RECOVERY_NORMAL(750)
[ 1.696333] [6: swapper/0: 1] HIGH_THRESHOLD_NORMAL(500), HIGH_RECOVERY_NORMAL(450) LOW_THRESHOLD_NORMAL(0), LOW_RECOVERY_NORMAL(50)
[ 1.696333] [6: swapper/0: 1] HIGHLIMIT_THRESHOLD_LPM(800), HIGHLIMIT_RECOVERY_LPM(750)
[ 1.696333] [6: swapper/0: 1] HIGH_THRESHOLD_LPM(500), HIGH_RECOVERY_LPM(450) LOW_THRESHOLD_LPM(0), LOW_RECOVERY_LPM(50)
[ 1.696402] [6: swapper/0: 1] sec_bat_parse_dt: chg_float_voltage_conv is Empty
[ 1.696413] [6: swapper/0: 1] sec_bat_parse_dt: wa volt recov is Empty
[ 1.696422] [6: swapper/0: 1] sec_bat_parse_dt: wa volt thr is Empty
[ 1.696431] [6: swapper/0: 1] sec_bat_parse_dt: wa float voltage is Empty
[ 1.696440] [6: swapper/0: 1] sec_bat_parse_dt : swelling fl check count is Empty
[ 1.696488] [6: swapper/0: 1] sec_bat_parse_dt : swelling drop voltage(set : 4150, condition : 4150)
[ 1.696503] [6: swapper/0: 1] sec_bat_parse_dt : SWELLING_HIGH_TEMP(410) SWELLING_HIGH_TEMP_RECOVERY(390)
[ 1.696503] [6: swapper/0: 1] SWELLING_LOW_TEMP_1st(150) SWELLING_LOW_TEMP_RECOVERY_1st(200) SWELLING_LOW_TEMP_2nd(50) SWELLING_LOW_TEMP_RECOVERY_2nd(100) SWELLING_LOW_CURRENT(700, 150), SWELLING_HIGH_CURRENT(1050, 150)
[ 1.696503] [6: swapper/0: 1] SWELLING_LOW_RCHG_VOL(4000), SWELLING_HIGH_RCHG_VOL(4000)
[ 1.696521] [6: swapper/0: 1] sec_bat_parse_dt : can't get wpc_en
[ 1.696536] [6: swapper/0: 1] sec_bat_parse_dt: [Long life] num_age_step : 5
[ 1.696541] [6: swapper/0: 1] [0/4]cycle:0, float:4350, full_v:4250, recharge_v:4280, soc:93
[ 1.696548] [6: swapper/0: 1] [1/4]cycle:200, float:4330, full_v:4230, recharge_v:4260, soc:92
[ 1.696557] [6: swapper/0: 1] [2/4]cycle:250, float:4310, full_v:4210, recharge_v:4240, soc:91
[ 1.696566] [6: swapper/0: 1] [3/4]cycle:300, float:4290, full_v:4190, recharge_v:4220, soc:90
[ 1.696571] [6: swapper/0: 1] [4/4]cycle:1000, float:4240, full_v:4140, recharge_v:4170, soc:89
[ 1.696632] [6: swapper/0: 1] sec_bat_parse_dt: vendor : Battery, technology : 2, cable_check_type : 4
[ 1.696632] [6: swapper/0: 1] cable_source_type : 1, event_waiting_time : 0
[ 1.696632] [6: swapper/0: 1] polling_type : 1, initial_count : 0, check_count : 0
[ 1.696632] [6: swapper/0: 1] check_adc_max : 1440, check_adc_min : 0
[ 1.696632] [6: swapper/0: 1] ovp_uvlo_check_type : 3, thermal_source : 2, chg_thermal_source : 2
[ 1.696632] [6: swapper/0: 1] temp_check_type : 2, temp_check_count : 1
[ 1.696632] [6: swapper/0: 1] chg_heating_prevention_method : 1
[ 1.696754] [6: swapper/0: 1] sec_bat_set_current_event: current event before(0x0), after(0x0)
[ 1.696761] [6: swapper/0: 1] sec_battery_probe: init block_water_event = 0
[ 1.696953] [6: swapper/0: 1] sec_battery_cisd_init: cisd.err_cap_high_thr:4000, cisd.err_cap_low_thr:3500, cisd.overflow_cap_thr:3300
[ 1.699951] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: OTP 4E(6b) 4F(10) current 4E(6b) 4F(10)
[ 1.702665] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: [DEBUG]s2mu004_get_rawsoc: data0 (58) data1 (36)
[ 1.715542] [7: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc raw data0 (221) data1 (8)
[ 1.715552] [7: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc (5539)
[ 1.715559] [7: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: current_soc (5660), previous soc (5660), diff (0), FG_mode(0)
[ 1.717777] [7: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0x 315), avg current (-193)mA
[ 1.717787] [7: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)%
[ 1.770587] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_monout_avgvbat: avgvbat (3866)
[ 1.770606] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: UI SOC = 0
[ 1.777412] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3864)
[ 1.778674] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (172) data1 (123)
[ 1.779311] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3864), src (0x01)
[ 1.780578] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0x 7b6)
[ 1.780587] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (-482)mA
[ 1.780596] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: Fuelgauge Mode: 0, Force power-off voltage: 3300
[ 1.802070] [6: swapper/0: 1] [FG]s2mu004_fg_test_read: 0x00:0x10, 0x01:0x03, 0x02:0x00, 0x03:0x1c, 0x04:0xac, 0x05:0x7b, 0x06:0xb6, 0x07:0x07, 0x08:0x3a, 0x09:0x24, 0x0a:0x0c, 0x0b:0x1d, 0x0c:0x10, 0x0d:0x00, 0x0e:0x18, 0x0f:0x2e, 0x10:0x86, 0x11:0x0b, 0x12:0x00, 0x13:0x0f, 0x14:0x40, 0x15:0x00, 0x16:0x14, 0x17:0x04, 0x18:0x0c, 0x19:0xb0, 0x1a:0x1a, 0x1b:0x00, 0x1c:0x3c, 0x1d:0xec, 0x1e:0x03, 0x1f:0x00, 0x25:0x10, 0x27:0x50,
[ 1.802081] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_fg_get_scaled_capacity: capacity_max(1000) scaled capacity(56.6), raw_soc(56.6)
[ 1.802091] [6: swapper/0: 1] sec_battery_probe: Fail to set psy ((null))
[ 1.802097] [6: swapper/0: 1] usb: [M] manager_notifier_register: listener=23 register
[ 1.802105] [6: swapper/0: 1] usb: [M] manager_notifier_register BATTERY: cable_type=70 (MUIC)
[ 1.802114] [6: swapper/0: 1] sec-battery battery: usb_typec_handle_notification: action (1) dump(0x6, 0x2, 0x01, 0x0000, 0x0000, 0x0046)
[ 1.802121] [6: swapper/0: 1] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1)
[ 1.802126] [6: swapper/0: 1] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4)
[ 1.802138] [6: swapper/0: 1] sec-battery battery: usb_typec_handle_notification: CMD[DETACH], CABLE_TYPE[1]
[ 1.802145] [6: swapper/0: 1] vbus_notifier_register: listener=1 register
[ 1.802154] [6: swapper/0: 1] vbus_handle_notification: action=1, vbus_status=1
[ 1.802161] [6: swapper/0: 1] sec_battery_probe: Fail to s2mu004-charger set (43=>-22)
[ 1.802169] [6: swapper/0: 1] sec_bat_get_property cable type = 1 sleep_mode = 0
[ 1.802175] [6: swapper/0: 1] sec-battery battery: sec_battery_probe: SEC Battery Driver Monitorwork
[ 1.802183] [6: swapper/0: 1] sec-battery battery: sec_battery_probe: SEC Battery Driver Loaded
[ 1.802189] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: Start
[ 1.802197] [7: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x0), after(0x4)
[ 1.802204] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: End
[ 1.802237] [6: kworker/6:5: 1958] sec_bat_get_property cable type = 1 sleep_mode = 0
[ 1.802607] [7: swapper/0: 1] [VIB] s2mu004_haptic_init
[ 1.802782] [7: swapper/0: 1] [VIB] 416 probe s2mu004_haptic_probe
[ 1.802790] [7: swapper/0: 1] s2mu004_haptic_parse_dt : start dt parsing
[ 1.802850] [7: swapper/0: 1] [VIB] : s2mu004_haptic_parse_dt : motor_type value 1
[ 1.802868] [7: swapper/0: 1] [VIB] s2mu004_haptic_parse_dt : max_timeout = 10000
[ 1.802873] [7: swapper/0: 1] [VIB] s2mu004_haptic_parse_dt : duty = 2403846
[ 1.802879] [7: swapper/0: 1] [VIB] s2mu004_haptic_parse_dt : period = 4807692
[ 1.802886] [7: swapper/0: 1] [VIB] s2mu004_haptic_parse_dt : max_duty = 0x5c
[ 1.802890] [7: swapper/0: 1] [VIB] s2mu004_haptic_parse_dt : pwm_id = 0
[ 1.803109] [6: swapper/0: 1] [VIB] request pwm, success:
[ 1.803514] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (172) data1 (123)
[ 1.804896] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3864), src (0x01)
[ 1.807756] [7: swapper/0: 1] [VIB] s2mu004_haptic_probe : S2MU004_REG_HAPTIC_MODE[0xe] = 0x20
[ 1.816318] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3864)
[ 1.818052] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_usbpd_probe
[ 1.818537] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0x 7b6)
[ 1.818544] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (-482)mA
[ 1.819172] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_usbpd_init_configure : Initial abnormal state to LPM Mode
[ 1.823287] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0x 315), avg current (-193)mA
[ 1.823295] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)%
[ 1.825491] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (172) data1 (123)
[ 1.826789] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_set_lpm_mode s2mu004 enter lpm mode
[ 1.826798] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_usbpd_set_cc_control, (0)
[ 1.827425] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3864), src (0x01)
[ 1.830979] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_temperature: temperature (290)
[ 1.832877] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: OTP 4E(6b) 4F(10) current 4E(6b) 4F(10)
[ 1.835400] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: [DEBUG]s2mu004_get_rawsoc: data0 (58) data1 (36)
[ 1.848206] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc raw data0 (221) data1 (8)
[ 1.848216] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc (5539)
[ 1.848224] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: current_soc (5660), previous soc (5660), diff (0), FG_mode(0)
[ 1.850374] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0x 315), avg current (-193)mA
[ 1.850383] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)%
[ 1.902930] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_monout_avgvbat: avgvbat (3866)
[ 1.902943] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: UI SOC = 56
[ 1.909716] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3864)
[ 1.910965] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (172) data1 (123)
[ 1.911596] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3864), src (0x01)
[ 1.912841] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0x 7b6)
[ 1.912848] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (-482)mA
[ 1.912855] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: Fuelgauge Mode: 0, Force power-off voltage: 3300
[ 1.933910] [6: kworker/u16:0: 6] [FG]s2mu004_fg_test_read: 0x00:0x10, 0x01:0x02, 0x02:0x00, 0x03:0x1c, 0x04:0xac, 0x05:0x7b, 0x06:0xb6, 0x07:0x07, 0x08:0x3a, 0x09:0x24, 0x0a:0x0c, 0x0b:0x1d, 0x0c:0x10, 0x0d:0x00, 0x0e:0x18, 0x0f:0x2e, 0x10:0x86, 0x11:0x0b, 0x12:0x00, 0x13:0x0f, 0x14:0x40, 0x15:0x00, 0x16:0x14, 0x17:0x04, 0x18:0x0c, 0x19:0xb0, 0x1a:0x1a, 0x1b:0x00, 0x1c:0x3c, 0x1d:0xec, 0x1e:0x03, 0x1f:0x00, 0x25:0x10, 0x27:0x50,
[ 1.933921] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_fg_get_scaled_capacity: capacity_max(1000) scaled capacity(56.6), raw_soc(56.6)
[ 1.933934] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_get_battery_info:Vnow(3864mV),Inow(-482mA),Imax(500mA),Ichg(0mA),SOC(56%),Tbat(259), Tusb(0), Tchg(290),Twpc(0)
[ 1.933942] [6: kworker/u16:0: 6] sec_bat_swelling_check: swelling highblock(410), highrecov(390)
[ 1.934581] [6: kworker/u16:0: 6] sec_bat_swelling_check: status(2), swell_mode(0:0:0), cv(4350)mV, temp(259)
[ 1.934590] [6: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x4), after(0x4)
[ 1.934596] [6: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x4), after(0x0)
[ 1.934602] [6: kworker/u16:0: 6] sec_bat_calculate_safety_time : EXPIRED_TIME(10380000), IP(0), CP(0), CURR(0), STANDARD(2150)
[ 1.935706] [6: kworker/u16:0: 6] [DEBUG]s2mu004_set_input_current_limit: current 500, 0x12
[ 1.953280] [6: kworker/u16:0: 6] s2mu004_test_read: 0x0a:0x03, 0x0b:0x00, 0x0c:0x03, 0x0d:0x01, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x11, 0x1a:0x0a, 0x1b:0x06, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x1b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95
[ 1.953290] [6: kworker/u16:0: 6] [DEBUG] s2mu004_chg_set_property: is_charging 0
[ 1.970897] [6: kworker/u16:0: 6] s2mu004_test_read: 0x0a:0x03, 0x0b:0x00, 0x0c:0x03, 0x0d:0x01, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x11, 0x1a:0x0a, 0x1b:0x06, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x1b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95
[ 1.970905] [6: kworker/u16:0: 6] sec_bat_set_charging_current: power(0), input(500), charge(500)
[ 1.970914] [6: kworker/u16:0: 6] [DEBUG]s2mu004_set_topoff_current: current 300
[ 1.972011] [6: kworker/u16:0: 6] [MUIC_HV] s2mu004_hv_muic_charger_init
[ 1.972024] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_monitor_work: HLT(800) HLR(750) HT(500), HR(450), LT(0), LR(50), lpcharge(0)
[ 1.972033] [6: kworker/6:5: 1958] [MUIC_HV] s2mu004_hv_muic_detect_after_charger_init
[ 1.972052] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(NONE, NONE, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(NONE), sleep_mode(0), Cycle(-1)
[ 1.972068] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_set_polling: Status:Discharging, Sleep:No, Charging:No, Short Poll:No
[ 1.972095] [6: kworker/6:4: 1957] sec_bat_get_property cable type = 1 sleep_mode = 0
[ 1.972130] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_set_polling: Polling time 30/30 sec.
[ 1.972666] [6: kworker/6:5: 1958] [MUIC_HV] s2mu004_hv_muic_detect_after_charger_init STATUS3:0x00
[ 1.987146] [6: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_set_normal_mode s2mu004 exit lpm mode
[ 1.987154] [6: swapper/0: 1] usbpd_init_counters: init counter
[ 1.987162] [6: swapper/0: 1] usbpd_init_manager
[ 1.987318] [6: swapper/0: 1] usbpd_init_manager done
[ 1.993119] [7: swapper/0: 1] ccic_notifier_init
[ 1.993127] [7: swapper/0: 1] ccic_notifier_init already registered
[ 1.993287] [6: swapper/0: 1] wake enabled for irq 211
[ 1.993305] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread
[ 1.996176] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x2 0x0 0x1 0x0 0x74 0x80 0x0]
[ 1.996195] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_usbpd_detach_init
[ 1.996210] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_usbpd_set_cc_control, (0)
[ 1.996225] [0:irq/211-s2mu004: 1980] usbpd_manager_plug_detach: usbpd plug detached
[ 1.996239] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: usbpd_policy_reset DETACHED
[ 1.996254] [0:irq/211-s2mu004: 1980] usbpd_init_counters: init counter
[ 1.996267] [0:irq/211-s2mu004: 1980] usbpd_init_manager_val
[ 2.002466] [0:irq/211-s2mu004: 1980] s2mu004_set_vconn_source, not support vconn source
[ 2.003107] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_check_port_detect, PLUG Error
[ 2.003124] [0:irq/211-s2mu004: 1980] usb: ccic_event_work,event_work(ffffffc07f09e380)
[ 2.003144] [0:irq/211-s2mu004: 1980] usb: ccic_event_work,event_work(ffffffc07f09e300)
[ 2.003156] [6: kworker/u16:2: 241] usb:ccic_event_notifier, dest=MUIC, id=ID_ATTACH, attach=0, event=0, event_work=ffffffc07f09e380
[ 2.003168] [6: kworker/u16:2: 241] ccic_notifier_notify: src:5 dest:4 id:01 attach:00 cable_type:00 rprd:0
[ 2.003178] [6: kworker/u16:2: 241] usb: [M] manager_handle_ccic_notification: src:CCIC dest:MUIC id:ID_ATTACH attach/rid:0
[ 2.003191] [6: kworker/u16:2: 241] usb: [M] manager_handle_ccic_notification: CCIC_NOTIFY_DETACH (pd=0, cable_type=0)
[ 2.003204] [6: kworker/u16:2: 241] usb: [M] manager_notifier_notify: src:CCIC dest:MUIC id:ID_ATTACH sub1:00 sub2:00 sub3:00
[ 2.003217] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_notification: Rcvd Noti=> action: 1 src:5 dest:4 id:1 sub[0 0 0], muic_if : ffffffc07f50a000
[ 2.003221] [6: kworker/u16:2: 241] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:0 legacy_dev:0
[ 2.003230] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_notification: NOTIFY_ID_ATTACH: Detached
[ 2.003938] [6: kworker/u16:2: 241] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 2.003945] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_ccic_attach: src:5 dest:4 id:1 attach:0 cable_type:0 rprd:0
[ 2.003952] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_ccic_detach
[ 2.003958] [6: kworker/u16:2: 241] [MUIC] s2mu004_if_com_to_open_with_vbus
[ 2.004738] [6: kworker/u16:2: 241] [MUIC] s2mu004_muic_set_com_sw MANSW reg(0x2), just pass
[ 2.004746] [6: kworker/u16:2: 241] [MUIC] muic_core_get_ccic_cable_state call, attached_dev : 0
[ 2.004755] [6: kworker/u16:2: 241] [MUIC] muic_jig_uart_cb: MUIC uart type(0)
[ 2.004765] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_ccic_detach_always
[ 2.004774] [6: kworker/u16:2: 241] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:0 legacy_dev:0
[ 2.004781] [6: kworker/u16:2: 241] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.004787] [6: kworker/u16:2: 241] ccic_notifier_notify: notify done(0x0)
[ 2.004794] [6: kworker/u16:2: 241] usb:ccic_event_notifier, dest=MUIC, id=ID_RID, attach=7, event=0, event_work=ffffffc07f09e300
[ 2.004800] [6: kworker/u16:2: 241] ccic_notifier_notify: src:5 dest:4 id:02 rid:07
[ 2.004807] [6: kworker/u16:2: 241] usb: [M] manager_handle_ccic_notification: src:CCIC dest:MUIC id:ID_RID attach/rid:7
[ 2.004812] [6: kworker/u16:2: 241] usb: [M] manager_notifier_notify: src:CCIC dest:MUIC id:ID_RID sub1:07 sub2:00 sub3:00
[ 2.004818] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_notification: Rcvd Noti=> action: 2 src:5 dest:4 id:2 sub[7 0 0], muic_if : ffffffc07f50a000
[ 2.004824] [6: kworker/u16:2: 241] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:0 legacy_dev:0
[ 2.004829] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_notification: NOTIFY_ID_RID
[ 2.004834] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_ccic_rid: src:5 dest:4 id:2 rid:7 sub2:0 sub3:0
[ 2.004839] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_ccic_rid: RID but No ATTACH->discarded
[ 2.004844] [6: kworker/u16:2: 241] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:0 legacy_dev:0
[ 2.004849] [6: kworker/u16:2: 241] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.004854] [6: kworker/u16:2: 241] ccic_notifier_notify: notify done(0x0)
[ 2.005600] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_check_port_detect, PLUG Error
[ 2.006427] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_usbpd_check_rid : attached rid state(0)
[ 2.006438] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_irq_thread
[ 2.007952] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x0 0x1 0x0 0x0 0x0 0x0]
[ 2.007967] [7: swapper/0: 1] [MUIC] muic_ccic_notifier_register: listener=5 register
[ 2.007980] [7: swapper/0: 1] type3_handle_notification action:4, attached_dev:52, lpm:0, pdic_data->is_otg_vboost:0, pdic_data->is_otg_reboost:0
[ 2.008059] [7: swapper/0: 1] dual_role_get_local_prop : usbpd_data is null : request prop = 1
[ 2.008066] [7: swapper/0: 1] dual_role_usb otg_default: driver failed to report `mode' property: -22
[ 2.008078] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_usbpd_probe s2mu004 usbpd driver uploaded!
[ 2.008304] [7: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin gpg3-5 already requested by 139b0000.pinctrl; cannot claim for spi4.0
[ 2.008312] [7: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin-131 (spi4.0) status -22
[ 2.008319] [7: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: could not request pin 131 (gpg3-5) from group gpg3-5 on device samsung-pinctrl
[ 2.008325] [7: swapper/0: 1] ssp spi4.0: Error applying setting, reverse things back
[ 2.008358] [7: swapper/0: 1] [SSP] ssp_probe( 474):
[ 2.008369] [7: swapper/0: 1] [SSP] mcu_int1=16
[ 2.008375] [7: swapper/0: 1] [SSP] mcu_int2=17
[ 2.008388] [7: swapper/0: 1] [SSP] ap_int=116
[ 2.008398] [7: swapper/0: 1] [SSP] rst=131
[ 2.008407] [7: swapper/0: 1] [SSP] boot0=113
[ 2.008444] [7: swapper/0: 1] [SSP] acc-posi[7] mag-posi[5]
[ 2.008451] [7: swapper/0: 1] [SSP] hi-thresh[55] low-thresh[40]
[ 2.008451] [7: swapper/0: 1]
[ 2.008462] [7: swapper/0: 1] [SSP] detect-hi[250] detect-low[130]
[ 2.008462] [7: swapper/0: 1]
[ 2.008473] [7: swapper/0: 1] [SSP] acc-type = 1
[ 2.008479] [7: swapper/0: 1] [SSP] pressure-type = 1
[ 2.008486] [7: swapper/0: 1] [SSP] mag-type = 1
[ 2.008492] [7: swapper/0: 1] [SSP] this project = 1
[ 2.008519] [7: swapper/0: 1]
[ 2.008519] [7: swapper/0: 1] #####################################################
[ 2.008531] [7: swapper/0: 1] [SSP] initialize_variable( 70): initialize_variable.
[ 2.008617] [7: kworker/7:3: 1772] usbpd_policy_work : usbpd cable is empty
[ 2.008624] [7: kworker/7:3: 1772] usbpd-s2mu004 5-003c: usbpd_policy_work Finished
[ 2.008638] [7: kworker/7:3: 1772] dual_role_get_local_prop : request prop = 1 , attached_state = 0, power_role_dual = 0
[ 2.008645] [7: kworker/7:3: 1772] dual_role_get_local_prop : request prop = 2 , attached_state = 0, power_role_dual = 0
[ 2.008651] [7: kworker/7:3: 1772] dual_role_get_local_prop : request prop = 3 , attached_state = 0, power_role_dual = 0
[ 2.008657] [7: kworker/7:3: 1772] dual_role_get_local_prop : request prop = 4 , attached_state = 0, power_role_dual = 0
[ 2.008723] [7: swapper/0: 1] [SSP] init accelerometer_sensor iio dev, type = 1
[ 2.008879] [7: swapper/0: 1] [SSP] init geomagnetic_sensor iio dev, type = 2
[ 2.009029] [7: swapper/0: 1] [SSP] init gyro_sensor iio dev, type = 4
[ 2.009160] [0: swapper/0: 1] [SSP] init light_sensor iio dev, type = 5
[ 2.009279] [7: swapper/0: 1] [SSP] init pressure_sensor iio dev, type = 6
[ 2.009380] [0: swapper/0: 1] [SSP] init proximity_sensor iio dev, type = 8
[ 2.009493] [7: swapper/0: 1] [SSP] init uncal_geomagnetic_sensor iio dev, type = 14
[ 2.009605] [0: swapper/0: 1] [SSP] init uncal_gyro_sensor iio dev, type = 16
[ 2.009713] [7: swapper/0: 1] [SSP] init sig_motion_sensor iio dev, type = 17
[ 2.009789] [7: swapper/0: 1] [SSP] init step_det_sensor iio dev, type = 18
[ 2.009890] [0: swapper/0: 1] [SSP] init step_cnt_sensor iio dev, type = 19
[ 2.010044] [7: swapper/0: 1] [SSP] init geomagnetic_rotation_vector_sensor iio dev, type = 20
[ 2.010122] [7: swapper/0: 1] [SSP] init tilt_detector iio dev, type = 22
[ 2.010231] [0: swapper/0: 1] [SSP] init pickup_gesture iio dev, type = 25
[ 2.010392] [7: swapper/0: 1] [SSP] init meta_event iio dev, type = 27
[ 2.010506] [0: swapper/0: 1] [SSP] init geomagnetic_power iio dev, type = 30
[ 2.010661] [7: swapper/0: 1] [SSP] init interrupt_gyro_sensor iio dev, type = 31
[ 2.010827] [6: swapper/0: 1] [SSP] requesting IRQ 212
[ 2.011017] [0:irq/212-SSP_Int: 2001] [SSP] parse_dataframe( 354): ssp shutdown, do not parse
[ 2.011312] [7: swapper/0: 1] [SSP] initialize_mobeam
[ 2.011412] [7: swapper/0: 1] input: ssp_context as /devices/virtual/input/input5
[ 2.011791] [6: swapper/0: 1] [SSP] ssp_enable( 21): enable = 1, is_shutdown = 1
[ 2.011806] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 4 type 255 subcmd 12 send_buf_len 0 timeout 1000
[ 2.012079] [0:irq/212-SSP_Int: 2001] [SSP] [M] MGI1
[ 2.012079] [0:irq/212-SSP_Int: 2001] MGI2
[ 2.012079] [0:irq/212-SSP_Int: 2001] #>l init
[ 2.012079] [0:irq/212-SSP_Int: 2001] #>p init
[ 2.012079] [0:irq/212-SSP_Int: 2001] #>pr init
[ 2.012079] [0:irq/212-SSP_Int: 2001] RESET
[ 2.012079] [0:irq/212-SSP_Int: 2001] TxRetry 2
[ 2.017268] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread
[ 2.018022] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 1000, status 0
[ 2.018029] [6: swapper/0: 1] [SSP] ssp_send_command( 350): receive_buf length = 4
[ 2.018035] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer)
[ 2.018041] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg)
[ 2.018047] [6: swapper/0: 1] [SSP] MCU Firm Rev : Old = 17112200, New = 17112200
[ 2.018053] [6: swapper/0: 1] [SSP] clean_pending_list( 290): IN
[ 2.018058] [6: swapper/0: 1] [SSP] clean_pending_list( 302): OUT
[ 2.018063] [6: swapper/0: 1] [SSP] initialize_mcu( 114): is_shutdown = 0
[ 2.018070] [6: swapper/0: 1] [SSP] set_sensor_position( 59):
[ 2.018075] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 1 subcmd 26 send_buf_len 4 timeout 0
[ 2.018895] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x0 0x1 0x0 0x60 0x0 0x0]
[ 2.019546] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: SINK
[ 2.021755] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: usbpd_policy_reset ATTACHED
[ 2.021770] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_check_port_detect 2175: is_host = 0, is_client = 0
[ 2.021785] [0:irq/211-s2mu004: 1980] usb: ccic_event_work,event_work(ffffffc86f5d2c00)
[ 2.021805] [0:irq/211-s2mu004: 1980] usb: ccic_event_work,event_work(ffffffc86f5d2c80)
[ 2.021812] [6: kworker/u16:0: 6] usb:ccic_event_notifier, dest=MUIC, id=ID_ATTACH, attach=1, event=0, event_work=ffffffc86f5d2c00
[ 2.021824] [6: kworker/u16:0: 6] ccic_notifier_notify: src:5 dest:4 id:01 attach:01 cable_type:00 rprd:0
[ 2.021832] [6: kworker/u16:0: 6] usb: [M] manager_handle_ccic_notification: src:CCIC dest:MUIC id:ID_ATTACH attach/rid:1
[ 2.021842] [6: kworker/u16:0: 6] usb: [M] manager_handle_ccic_notification: CCIC_NOTIFY_ATTACH
[ 2.021854] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: src:CCIC dest:MUIC id:ID_ATTACH sub1:01 sub2:00 sub3:00
[ 2.021866] [6: kworker/u16:0: 6] [MUIC] muic_manager_handle_notification: Rcvd Noti=> action: 1 src:5 dest:4 id:1 sub[1 0 0], muic_if : ffffffc07f50a000
[ 2.021875] [6: kworker/u16:0: 6] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:0 legacy_dev:0
[ 2.021880] [6: kworker/u16:0: 6] [MUIC] muic_manager_handle_notification: NOTIFY_ID_ATTACH: Attached
[ 2.021886] [0:irq/211-s2mu004: 1980] usb: ccic_event_work, dest=1, event=2, usbpd_data->data_role_dual=0, usbpd_data->try_state_change=0
[ 2.021944] [0: kworker/0:1: 1183] dual_role_get_local_prop : request prop = 1 , attached_state = 2, power_role_dual = 1
[ 2.021963] [0: kworker/0:1: 1183] dual_role_get_local_prop : request prop = 2 , attached_state = 2, power_role_dual = 1
[ 2.021982] [0: kworker/0:1: 1183] dual_role_get_local_prop : request prop = 3 , attached_state = 2, power_role_dual = 1
[ 2.021998] [0: kworker/0:1: 1183] dual_role_get_local_prop : request prop = 4 , attached_state = 2, power_role_dual = 1
[ 2.022543] [6: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 2.022550] [6: kworker/u16:0: 6] [MUIC] muic_manager_handle_ccic_attach: src:5 dest:4 id:1 attach:1 cable_type:0 rprd:0
[ 2.022556] [6: kworker/u16:0: 6] [MUIC] muic_manager_handle_ccic_attach: Attach
[ 2.022562] [6: kworker/u16:0: 6] [MUIC] muic_manager_is_valid_rid_open: 0th ...
[ 2.024286] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0
[ 2.024293] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer)
[ 2.024301] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg)
[ 2.024308] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 4 subcmd 26 send_buf_len 4 timeout 0
[ 2.027710] [0:irq/212-SSP_Int: 2001] [SSP] [M] ACC AXIS = 7
[ 2.030515] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0
[ 2.030522] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer)
[ 2.030528] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg)
[ 2.030535] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 2 subcmd 26 send_buf_len 4 timeout 0
[ 2.033986] [0:irq/212-SSP_Int: 2001] [SSP] [M] GYRO AXIS = 7
[ 2.036754] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0
[ 2.036762] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer)
[ 2.036770] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg)
[ 2.036778] [6: swapper/0: 1] [SSP] Sensor Posision A : 7, G : 7, M: 5, P: 0
[ 2.036786] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 4 type 255 subcmd 27 send_buf_len 0 timeout 1000
[ 2.040220] [0:irq/212-SSP_Int: 2001] [SSP] [M] MAG AXIS = 5
[ 2.043090] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 1000, status 0
[ 2.043100] [6: swapper/0: 1] [SSP] ssp_send_command( 350): receive_buf length = 8
[ 2.043109] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer)
[ 2.043115] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg)
[ 2.043123] [6: swapper/0: 1] [SSP] state(0x1f24f4176): 111110010010011110100000101110110
[ 2.043127] [6: swapper/0: 1] [SSP] state2: 0000000000000000000011010111111
[ 2.043134] [6: swapper/0: 1] [SSP] initialize_mcu( 128): sensor state 0x1f24f4176
[ 2.043141] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 2 subcmd 32 send_buf_len 27 timeout 0
[ 2.048239] [6: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 2.048245] [6: kworker/u16:0: 6] [MUIC] muic_manager_is_valid_rid_open: 1th ...
[ 2.048259] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_vbus_short_check, 10k check : cc1_val(2), cc2_val(4)
[ 2.049364] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0
[ 2.049371] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer)
[ 2.049376] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg)
[ 2.049384] [6: swapper/0: 1] [SSP] set_pdc_matrix: finished
[ 2.049391] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 5 subcmd 34 send_buf_len 28 timeout 0
[ 2.055701] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0
[ 2.055709] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer)
[ 2.055717] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg)
[ 2.055725] [6: swapper/0: 1] [SSP]: set_light_coef - -830 1100 -1180 1000 842 3521 2095
[ 2.055733] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 4 type 255 subcmd 12 send_buf_len 0 timeout 1000
[ 2.059293] [0:irq/212-SSP_Int: 2001] [SSP] [M] #>l set COEF -830 1100 -1180 1000 842 3521 2095
[ 2.062031] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 1000, status 0
[ 2.062040] [6: swapper/0: 1] [SSP] ssp_send_command( 350): receive_buf length = 4
[ 2.062048] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer)
[ 2.062056] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg)
[ 2.062061] [6: swapper/0: 1] [SSP] MCU Firm Rev : New = 17112200
[ 2.062069] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 255 subcmd 1 send_buf_len 0 timeout 0
[ 2.068379] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0
[ 2.068388] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer)
[ 2.068396] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg)
[ 2.068404] [6: swapper/0: 1] [SSP] ssp_send_status( 376): command 0xd3
[ 2.068413] [6: swapper/0: 1] [SSP] ssp_probe( 578): probe success!
[ 2.068417] [6: swapper/0: 1] #####################################################
[ 2.068417] [6: swapper/0: 1]
[ 2.068471] [6: swapper/0: 1] samsung_abox_dump_late_initcall
[ 2.068497] [6: swapper/0: 1] samsung_abox_log_late_initcall
[ 2.068520] [6: swapper/0: 1] samsung_abox_late_initcall
[ 2.068896] [6: swapper/0: 1] ALSA device list:
[ 2.068904] [6: swapper/0: 1] #0: Exynos7885-COD3035
[ 2.068912] [6: swapper/0: 1] #1: dspg-dbmdx
[ 2.068964] [6: swapper/0: 1] Warning: unable to open an initial console.
[ 2.069773] [6: swapper/0: 1] Freeing unused kernel memory: 4280K (ffffffc000f7b000 - ffffffc0013a9000)
[ 2.069794] [6: swapper/0: 1] Freeing alternatives memory: 56K (ffffffc0013a9000 - ffffffc0013b7000)
[ 2.071943] [7: init: 1] !@Boot: start init process
[ 2.072170] [7: init: 1] init: init first stage started!
[ 2.072326] [7: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:kernel RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1]
[ 2.072333] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_vbus_short_check, 56k check : cc1_val(4), cc2_val(4)
[ 2.072343] [6: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 2.072348] [0:irq/211-s2mu004: 1980] usb: ccic_event_work,event_work(ffffffc86f5d2e80)
[ 2.072357] [6: kworker/u16:0: 6] [MUIC] muic_manager_is_valid_rid_open: 2th ...
[ 2.076003] [7: init: 1] SELinux: 8192 avtab hash slots, 18765 rules.
[ 2.082746] [7: init: 1] SELinux: 8192 avtab hash slots, 18765 rules.
[ 2.082851] [7: init: 1] SELinux: 1 users, 2 roles, 2227 types, 0 bools, 1 sens, 1024 cats
[ 2.082859] [7: init: 1] SELinux: 63 classes, 18765 rules
[ 2.085014] [7: init: 1] SELinux: Completing initialization.
[ 2.085024] [7: init: 1] SELinux: Setting up existing superblocks.
[ 2.096558] [7: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 2.096569] [7: kworker/u16:0: 6] [MUIC] muic_manager_is_valid_rid_open: 3th ...
[ 2.098540] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_vbus_short_check, vbus short check(0) : cc1_val(1), cc2_val(4)
[ 2.107275] [7: init: 1] init: SELinux: Loaded policy from /sepolicy
[ 2.108554] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_vbus_short_check, cc short check success (26)
[ 2.109886] [0: kworker/0:1: 1183] usbpd_policy_work, 0
[ 2.109900] [0: kworker/0:1: 1183] usbpd_policy_work, SINK
[ 2.109917] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_startup
[ 2.109931] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: s2mu004_usbpd_set_cc_control, (1)
[ 2.111058] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_wait_for_capabilities
[ 2.111069] [0: kworker/0:1: 1183] usbpd_wait_msg, 505
[ 2.120026] [6: init: 1] init: (Initializing SELinux enforcing took 0.05s.)
[ 2.120304] [6: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:kernel:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1]
[ 2.120345] [7: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 2.120353] [7: kworker/u16:0: 6] [MUIC] muic_manager_is_valid_rid_open: 4th ...
[ 2.122739] [6: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts.bin.
[ 2.125040] [7: init: 1] init: init second stage started!
[ 2.131985] [7: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1]
[ 2.134365] [7: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts.bin.
[ 2.134486] [7: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1]
[ 2.135312] [7: init: 1] init: Running restorecon...
[ 2.148863] [6: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0)
[ 2.148873] [6: kworker/u16:0: 6] [MUIC] muic_manager_handle_ccic_attach: No VBUS-> doing nothing.
[ 2.148880] [6: kworker/u16:0: 6] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:1 legacy_dev:0
[ 2.148888] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.148893] [6: kworker/u16:0: 6] ccic_notifier_notify: notify done(0x0)
[ 2.148904] [6: kworker/u16:0: 6] usb:ccic_event_notifier, dest=USB, id=ID_USB, attach=Attached, drp=USB_ATTACH_UFP, event_work=ffffffc86f5d2c80
[ 2.148911] [6: kworker/u16:0: 6] ccic_notifier_notify: src:5 dest:1 id:03 sub1:1 sub2:02 sub3:00
[ 2.148918] [6: kworker/u16:0: 6] usb: [M] manager_handle_ccic_notification: src:CCIC dest:USB id:ID_USB attach/rid:1
[ 2.148925] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: src:CCIC dest:USB id:ID_USB sub1:01 sub2:02 sub3:00
[ 2.148935] [6: kworker/u16:0: 6] sec-battery battery: usb_typec_handle_notification: action (3) dump(0x5, 0x1, 0x03, 0x0001, 0x0002, 0x0000)
[ 2.148942] [6: kworker/u16:0: 6] sec-battery battery: usb_typec_handle_notification: skip handler dest(1)
[ 2.148948] [6: kworker/u16:0: 6] usb_notifier: ccic_usb_handle_notification: Turn On Device(UFP)
[ 2.148954] [6: kworker/u16:0: 6] usb_notify: send_otg_notify event=vbus(1) enable=1
[ 2.148959] [6: kworker/u16:0: 6] usb_notify: send_otg_notify reserve event
[ 2.148964] [6: kworker/u16:0: 6] usb_notify: is_blocked type=2, disable_state=0
[ 2.148969] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.148974] [6: kworker/u16:0: 6] ccic_notifier_notify: notify done(0x0)
[ 2.148980] [6: kworker/u16:0: 6] usb:ccic_event_notifier, dest=BATTERY, id=ID_POWER_STATUS, attach=1, event=0, event_work=ffffffc86f5d2e80
[ 2.148985] [6: kworker/u16:0: 6] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0
[ 2.148991] [6: kworker/u16:0: 6] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1
[ 2.148996] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00
[ 2.149003] [6: kworker/u16:0: 6] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000)
[ 2.149009] [6: kworker/u16:0: 6] sec-battery battery: usb_typec_handle_notification: battery->rp_currentlvl(2)
[ 2.149015] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.149019] [6: kworker/u16:0: 6] ccic_notifier_notify: notify done(0x0)
[ 2.163462] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt1(0x00)
[ 2.164199] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt2(0x00)
[ 2.164984] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: AFC interrupt(0x00)
[ 2.165717] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: 0x48 (0x00)
[ 2.167135] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: muic interrupt(0x20, 0x01)
[ 2.167151] [0:irq/131-s2mu004: 1241] [MUIC] muic-rid_chg S2MU004_FIRST_ATTACH start
[ 2.167793] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (1)
[ 2.168433] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 1, irq_num : 28
[ 2.168445] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 1, irq_num: 28
[ 2.168458] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_FIRST_ATTACH done
[ 2.168472] [0:irq/131-s2mu004: 1241] [MUIC] muic-vbus_on S2MU004_FIRST_ATTACH start
[ 2.169111] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (1)
[ 2.169753] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 1, irq_num : 29
[ 2.169766] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 1, irq_num: 29
[ 2.192657] [0:irq/131-s2mu004: 1241] [MUIC] dev[1:0x80, 2:0x00, 3:0x00]
[ 2.192673] [0:irq/131-s2mu004: 1241] [MUIC] adc:0x00, vbvolt:0x01, apple:0x06
[ 2.192687] [0:irq/131-s2mu004: 1241] [MUIC] chg_type:0x00, vmid:0x01, dev_id:0x38
[ 2.192702] [0:irq/131-s2mu004: 1241] [MUIC] muic_pdic_notifier_attach_attached_dev: (52)
[ 2.192715] [0:irq/131-s2mu004: 1241] [MUIC] muic_ccic_notifier_notify: CMD=4, DATA=52
[ 2.192733] [0:irq/131-s2mu004: 1241] type3_handle_notification action:4, attached_dev:52, lpm:0, pdic_data->is_otg_vboost:0, pdic_data->is_otg_reboost:0
[ 2.192746] [0:irq/131-s2mu004: 1241] [MUIC] muic_ccic_notifier_notify: notify done(0x0)
[ 2.192760] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_detect_second_attach change mode to second attach!
[ 2.192774] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_control_rid_adc (Disable)
[ 2.244501] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread
[ 2.246316] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x0 0x21 0x0 0x8 0xc0 0x0]
[ 2.246349] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_evaluate_capability
[ 2.248597] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: [Rx] [0x1161] [0x3601912c]
[ 2.248614] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: [1] FIXED volt(5000)mV, max current(3000)
[ 2.248626] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_select_capability
[ 2.251712] [0: kworker/0:1: 1183] usbpd_wait_msg, 505
[ 2.256410] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread
[ 2.257890] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x3 0x0 0x1 0x0 0xc 0x80 0x0]
[ 2.257916] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_transition_sink
[ 2.257928] [0: kworker/0:1: 1183] usbpd_wait_msg, 505
[ 2.291493] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread
[ 2.293121] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x10 0x1 0x0 0x8 0xc0 0x0]
[ 2.293147] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: got PS_READY.
[ 2.293159] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready
[ 2.293172] [0: kworker/0:1: 1183] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:ffff rprd:ffc0
[ 2.293183] [0: kworker/0:1: 1183] ccic_notifier_notify: PD event:2, num:1, sel:1
[ 2.293198] [0: kworker/0:1: 1183] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1
[ 2.293210] [0: kworker/0:1: 1183] usb: [M] manager_handle_ccic_notification: PD charger + UFP
[ 2.293222] [0: kworker/0:1: 1183] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:ffc0 sub3:ffff
[ 2.293240] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0xffc0, 0xffff)
[ 2.293258] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1
[ 2.293270] [0: kworker/0:1: 1183] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000
[ 2.293283] [0: kworker/0:1: 1183] make_pd_list: total pd_list_index: 1
[ 2.293295] [0: kworker/0:1: 1183] make_pd_list: Made pd_list[0], voltage : 5000, current : 3000, index : 1
[ 2.293307] [0: kworker/0:1: 1183] sec-battery battery: make_pd_list: battery->pdic_ps_rdy(1)
[ 2.293321] [0: kworker/0:1: 1183] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1)
[ 2.293335] [0: kworker/0:1: 1183] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4)
[ 2.293357] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19]
[ 2.293370] [0: kworker/0:1: 1183] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.293381] [0: kworker/0:1: 1183] ccic_notifier_notify: notify done(0x0)
[ 2.293394] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_work Finished
[ 2.293407] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready
[ 2.293418] [0: kworker/0:1: 1183] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0
[ 2.293425] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: Start
[ 2.293435] [6: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x0), after(0x4)
[ 2.293443] [6: kworker/u16:0: 6] sec_bat_get_input_current_in_power_list:max_input_current : 3000mA
[ 2.293448] [6: kworker/u16:0: 6] sec_bat_get_charging_current_in_power_list:pd_charge_power : 15000000mW, max_charging_current : 2150mA
[ 2.293455] [0: kworker/0:1: 1183] ccic_notifier_notify: PD event:2, num:1, sel:1
[ 2.293464] [0: kworker/0:1: 1183] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1
[ 2.293473] [0: kworker/0:1: 1183] usb: [M] manager_handle_ccic_notification: PD charger + UFP
[ 2.293481] [0: kworker/0:1: 1183] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00
[ 2.293493] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000)
[ 2.293502] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1)
[ 2.293508] [6: kworker/u16:0: 6] [DEBUG]s2mu004_chg_set_property: float voltage(4350)
[ 2.293515] [6: kworker/u16:0: 6] [DEBUG]s2mu004_set_regulation_voltage: float_voltage 4350
[ 2.293529] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1
[ 2.293540] [0: kworker/0:1: 1183] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000
[ 2.293568] [0: kworker/0:1: 1183] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1)
[ 2.293579] [0: kworker/0:1: 1183] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4)
[ 2.293599] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19]
[ 2.293611] [0: kworker/0:1: 1183] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.293631] [0: kworker/0:1: 1183] ccic_notifier_notify: notify done(0x0)
[ 2.293643] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_work Finished
[ 2.294645] [6: kworker/u16:0: 6] sec_bat_cable_work: float voltage = 4350
[ 2.294656] [6: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x4), after(0x4)
[ 2.294672] [6: kworker/u16:0: 6] sec_bat_get_property cable type = 19 sleep_mode = 0
[ 2.294679] [6: kworker/u16:0: 6] [DEBUG]s2mu004_enable_charger_switch: turn on charger
[ 2.295619] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_bcd_rescan
[ 2.297226] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_SECOND_ATTACH done
[ 2.297981] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt1(0x80)
[ 2.298806] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt2(0x00)
[ 2.299452] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: AFC interrupt(0x00)
[ 2.300122] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: 0x48 (0x00)
[ 2.300168] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread
[ 2.301550] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: muic interrupt(0x02, 0x04)
[ 2.301704] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x0 0x21 0x0 0x8 0x80 0x0]
[ 2.301738] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready
[ 2.301752] [1: kworker/1:1: 1962] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0
[ 2.301763] [1: kworker/1:1: 1962] ccic_notifier_notify: PD event:2, num:1, sel:1
[ 2.301780] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1
[ 2.301791] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: PD charger + UFP
[ 2.301804] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00
[ 2.301824] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000)
[ 2.301838] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1)
[ 2.301851] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1
[ 2.301864] [1: kworker/1:1: 1962] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000
[ 2.301878] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1)
[ 2.301890] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4)
[ 2.301918] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19]
[ 2.301930] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.301942] [1: kworker/1:1: 1962] ccic_notifier_notify: notify done(0x0)
[ 2.301955] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_evaluate_capability
[ 2.302200] [0:irq/131-s2mu004: 1241] [IRQ] s2mu004_chg_isr , STATUS0 : 63
[ 2.302200] [0:irq/131-s2mu004: 1241]
[ 2.302213] [0:irq/131-s2mu004: 1241] s2mu004_chg_isr: Vbus status 0x63
[ 2.302213] [0:irq/131-s2mu004: 1241] <6>[ 2.303349] [0:irq/131-s2mu004: 1241] [MUIC] muic-detach S2MU004_SECOND_ATTACH start
[ 2.303888] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: [Rx] [0x1761] [0x2601912c]
[ 2.303904] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: [1] FIXED volt(5000)mV, max current(3000)
[ 2.303918] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_select_capability
[ 2.304001] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (1)
[ 2.304651] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x1f, vbvolt : 1, irq_num : 24
[ 2.304665] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 2, irq_num: 24
[ 2.304679] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_SECOND_ATTACH done
[ 2.304695] [0:irq/131-s2mu004: 1241] [MUIC] muic-adc_change S2MU004_SECOND_ATTACH start
[ 2.305349] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (1)
[ 2.305998] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x1f, vbvolt : 1, irq_num : 31
[ 2.306010] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 2, irq_num: 31
[ 2.306021] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_SECOND_ATTACH done
[ 2.307191] [1: kworker/1:1: 1962] usbpd_wait_msg, 505
[ 2.311848] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread
[ 2.313383] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x3 0x0 0x1 0x0 0xc 0x80 0x0]
[ 2.313414] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_transition_sink
[ 2.313427] [1: kworker/1:1: 1962] usbpd_wait_msg, 505
[ 2.346998] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread
[ 2.348769] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x10 0x1 0x0 0x8 0x80 0x0]
[ 2.348806] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread
[ 2.348835] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: got PS_READY.
[ 2.348848] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready
[ 2.348862] [1: kworker/1:1: 1962] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:ffff rprd:ffc0
[ 2.348872] [1: kworker/1:1: 1962] ccic_notifier_notify: PD event:2, num:1, sel:1
[ 2.348891] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1
[ 2.348902] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: PD charger + UFP
[ 2.348916] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:ffc0 sub3:ffff
[ 2.348934] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0xffc0, 0xffff)
[ 2.348948] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1)
[ 2.348961] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1
[ 2.348974] [1: kworker/1:1: 1962] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000
[ 2.348987] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1)
[ 2.348998] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4)
[ 2.349025] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19]
[ 2.349038] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.349050] [1: kworker/1:1: 1962] ccic_notifier_notify: notify done(0x0)
[ 2.349068] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_work Finished
[ 2.349082] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready
[ 2.349098] [1: kworker/1:1: 1962] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0
[ 2.349108] [1: kworker/1:1: 1962] ccic_notifier_notify: PD event:2, num:1, sel:1
[ 2.349121] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1
[ 2.349131] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: PD charger + UFP
[ 2.349145] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00
[ 2.349159] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000)
[ 2.349173] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1)
[ 2.349185] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1
[ 2.349199] [1: kworker/1:1: 1962] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000
[ 2.349213] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1)
[ 2.349224] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4)
[ 2.349243] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19]
[ 2.349256] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.349269] [1: kworker/1:1: 1962] ccic_notifier_notify: notify done(0x0)
[ 2.349282] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_work Finished
[ 2.350337] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x4 0x1 0x0 0x8 0x0 0x0]
[ 2.350366] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready
[ 2.350380] [1: kworker/1:2: 2019] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0
[ 2.350391] [1: kworker/1:2: 2019] ccic_notifier_notify: PD event:2, num:1, sel:1
[ 2.350404] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1
[ 2.350414] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: PD charger + UFP
[ 2.350427] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00
[ 2.350442] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000)
[ 2.350455] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1)
[ 2.350467] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1
[ 2.350477] [1: kworker/1:2: 2019] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000
[ 2.350489] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1)
[ 2.350499] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4)
[ 2.350519] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19]
[ 2.350530] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.350541] [1: kworker/1:2: 2019] ccic_notifier_notify: notify done(0x0)
[ 2.350553] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_give_sink_cap
[ 2.354756] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready
[ 2.354772] [1: kworker/1:2: 2019] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:ffff rprd:ffc8
[ 2.354783] [1: kworker/1:2: 2019] ccic_notifier_notify: PD event:2, num:1, sel:0
[ 2.354797] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1
[ 2.354809] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: PD charger + UFP
[ 2.354823] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:ffc8 sub3:ffff
[ 2.354840] [1: kwork