blob: 2c26bd917cf9c7261eeaa0aa90249f6ce71b3cef [file] [log] [blame]
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in all
# copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Copyright (C) 2014 Joakim Söderberg <joakim.soderberg@gmail.com>
#
# This is intended to be run by a custom target in a CMake project like this.
# 0. Compile program with coverage support.
# 1. Clear coverage data. (Recursively delete *.gcda in build dir)
# 2. Run the unit tests.
# 3. Run this script specifying which source files the coverage should be performed on.
#
# This script will then use gcov to generate .gcov files in the directory specified
# via the COV_PATH var. This should probably be the same as your cmake build dir.
#
# It then parses the .gcov files to convert them into the Coveralls JSON format:
# https://coveralls.io/docs/api
#
# Example for running as standalone CMake script from the command line:
# (Note it is important the -P is at the end...)
# $ cmake -DCOV_PATH=$(pwd)
# -DCOVERAGE_SRCS="catcierge_rfid.c;catcierge_timer.c"
# -P ../cmake/CoverallsGcovUpload.cmake
#
CMAKE_MINIMUM_REQUIRED(VERSION 2.8)
#
# Make sure we have the needed arguments.
#
if (NOT COVERALLS_OUTPUT_FILE)
message(FATAL_ERROR "Coveralls: No coveralls output file specified. Please set COVERALLS_OUTPUT_FILE")
endif()
if (NOT COV_PATH)
message(FATAL_ERROR "Coveralls: Missing coverage directory path where gcov files will be generated. Please set COV_PATH")
endif()
if (NOT COVERAGE_SRCS)
message(FATAL_ERROR "Coveralls: Missing the list of source files that we should get the coverage data for COVERAGE_SRCS")
endif()
if (NOT PROJECT_ROOT)
message(FATAL_ERROR "Coveralls: Missing PROJECT_ROOT.")
endif()
# Since it's not possible to pass a CMake list properly in the
# "1;2;3" format to an external process, we have replaced the
# ";" with "*", so reverse that here so we get it back into the
# CMake list format.
string(REGEX REPLACE "\\*" ";" COVERAGE_SRCS ${COVERAGE_SRCS})
find_program(GCOV_EXECUTABLE gcov)
if (NOT GCOV_EXECUTABLE)
message(FATAL_ERROR "gcov not found! Aborting...")
endif()
find_package(Git)
# TODO: Add these git things to the coveralls json.
if (GIT_FOUND)
# Branch.
execute_process(
COMMAND ${GIT_EXECUTABLE} rev-parse --abbrev-ref HEAD
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_BRANCH
OUTPUT_STRIP_TRAILING_WHITESPACE
)
macro (git_log_format FORMAT_CHARS VAR_NAME)
execute_process(
COMMAND ${GIT_EXECUTABLE} log -1 --pretty=format:%${FORMAT_CHARS}
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE ${VAR_NAME}
OUTPUT_STRIP_TRAILING_WHITESPACE
)
endmacro()
git_log_format(an GIT_AUTHOR_EMAIL)
git_log_format(ae GIT_AUTHOR_EMAIL)
git_log_format(cn GIT_COMMITTER_NAME)
git_log_format(ce GIT_COMMITTER_EMAIL)
git_log_format(B GIT_COMMIT_MESSAGE)
message("Git exe: ${GIT_EXECUTABLE}")
message("Git branch: ${GIT_BRANCH}")
message("Git author: ${GIT_AUTHOR_NAME}")
message("Git e-mail: ${GIT_AUTHOR_EMAIL}")
message("Git commiter name: ${GIT_COMMITTER_NAME}")
message("Git commiter e-mail: ${GIT_COMMITTER_EMAIL}")
message("Git commit message: ${GIT_COMMIT_MESSAGE}")
endif()
############################# Macros #########################################
#
# This macro converts from the full path format gcov outputs:
#
# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
#
# to the original source file path the .gcov is for:
#
# /path/to/project/root/subdir/the_file.c
#
macro(get_source_path_from_gcov_filename _SRC_FILENAME _GCOV_FILENAME)
# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
# ->
# #path#to#project#root#subdir#the_file.c.gcov
get_filename_component(_GCOV_FILENAME_WEXT ${_GCOV_FILENAME} NAME)
# #path#to#project#root#subdir#the_file.c.gcov -> /path/to/project/root/subdir/the_file.c
string(REGEX REPLACE "\\.gcov$" "" SRC_FILENAME_TMP ${_GCOV_FILENAME_WEXT})
string(REGEX REPLACE "\#" "/" SRC_FILENAME_TMP ${SRC_FILENAME_TMP})
set(${_SRC_FILENAME} "${SRC_FILENAME_TMP}")
endmacro()
##############################################################################
# Get the coverage data.
file(GLOB_RECURSE GCDA_FILES "${COV_PATH}/*.gcda")
message("GCDA files:")
# Get a list of all the object directories needed by gcov
# (The directories the .gcda files and .o files are found in)
# and run gcov on those.
foreach(GCDA ${GCDA_FILES})
message("Process: ${GCDA}")
message("------------------------------------------------------------------------------")
get_filename_component(GCDA_DIR ${GCDA} PATH)
#
# The -p below refers to "Preserve path components",
# This means that the generated gcov filename of a source file will
# keep the original files entire filepath, but / is replaced with #.
# Example:
#
# /path/to/project/root/build/CMakeFiles/the_file.dir/subdir/the_file.c.gcda
# ------------------------------------------------------------------------------
# File '/path/to/project/root/subdir/the_file.c'
# Lines executed:68.34% of 199
# /path/to/project/root/subdir/the_file.c:creating '#path#to#project#root#subdir#the_file.c.gcov'
#
# If -p is not specified then the file is named only "the_file.c.gcov"
#
execute_process(
COMMAND ${GCOV_EXECUTABLE} -c -p -o ${GCDA_DIR} ${GCDA}
WORKING_DIRECTORY ${COV_PATH}
)
endforeach()
# TODO: Make these be absolute path
file(GLOB ALL_GCOV_FILES ${COV_PATH}/*.gcov)
# Get only the filenames to use for filtering.
#set(COVERAGE_SRCS_NAMES "")
#foreach (COVSRC ${COVERAGE_SRCS})
# get_filename_component(COVSRC_NAME ${COVSRC} NAME)
# message("${COVSRC} -> ${COVSRC_NAME}")
# list(APPEND COVERAGE_SRCS_NAMES "${COVSRC_NAME}")
#endforeach()
#
# Filter out all but the gcov files we want.
#
# We do this by comparing the list of COVERAGE_SRCS filepaths that the
# user wants the coverage data for with the paths of the generated .gcov files,
# so that we only keep the relevant gcov files.
#
# Example:
# COVERAGE_SRCS =
# /path/to/project/root/subdir/the_file.c
#
# ALL_GCOV_FILES =
# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
# /path/to/project/root/build/#path#to#project#root#subdir#other_file.c.gcov
#
# Result should be:
# GCOV_FILES =
# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
#
set(GCOV_FILES "")
#message("Look in coverage sources: ${COVERAGE_SRCS}")
message("\nFilter out unwanted GCOV files:")
message("===============================")
set(COVERAGE_SRCS_REMAINING ${COVERAGE_SRCS})
foreach (GCOV_FILE ${ALL_GCOV_FILES})
#
# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
# ->
# /path/to/project/root/subdir/the_file.c
get_source_path_from_gcov_filename(GCOV_SRC_PATH ${GCOV_FILE})
# Is this in the list of source files?
# TODO: We want to match against relative path filenames from the source file root...
list(FIND COVERAGE_SRCS ${GCOV_SRC_PATH} WAS_FOUND)
if (NOT WAS_FOUND EQUAL -1)
message("YES: ${GCOV_FILE}")
list(APPEND GCOV_FILES ${GCOV_FILE})
# We remove it from the list, so we don't bother searching for it again.
# Also files left in COVERAGE_SRCS_REMAINING after this loop ends should
# have coverage data generated from them (no lines are covered).
list(REMOVE_ITEM COVERAGE_SRCS_REMAINING ${GCOV_SRC_PATH})
else()
message("NO: ${GCOV_FILE}")
endif()
endforeach()
# TODO: Enable setting these
set(JSON_SERVICE_NAME "travis-ci")
set(JSON_SERVICE_JOB_ID $ENV{TRAVIS_JOB_ID})
set(JSON_TEMPLATE
"{
\"service_name\": \"\@JSON_SERVICE_NAME\@\",
\"service_job_id\": \"\@JSON_SERVICE_JOB_ID\@\",
\"source_files\": \@JSON_GCOV_FILES\@
}"
)
set(SRC_FILE_TEMPLATE
"{
\"name\": \"\@GCOV_SRC_REL_PATH\@\",
\"source_digest\": \"\@GCOV_CONTENTS_MD5\@\",
\"coverage\": \@GCOV_FILE_COVERAGE\@
}"
)
message("\nGenerate JSON for files:")
message("=========================")
set(JSON_GCOV_FILES "[")
# Read the GCOV files line by line and get the coverage data.
foreach (GCOV_FILE ${GCOV_FILES})
get_source_path_from_gcov_filename(GCOV_SRC_PATH ${GCOV_FILE})
file(RELATIVE_PATH GCOV_SRC_REL_PATH "${PROJECT_ROOT}" "${GCOV_SRC_PATH}")
# The new coveralls API doesn't need the entire source (Yay!)
# However, still keeping that part for now. Will cleanup in the future.
file(MD5 "${GCOV_SRC_PATH}" GCOV_CONTENTS_MD5)
message("MD5: ${GCOV_SRC_PATH} = ${GCOV_CONTENTS_MD5}")
# Loads the gcov file as a list of lines.
# (We first open the file and replace all occurences of [] with _
# because CMake will fail to parse a line containing unmatched brackets...
# also the \ to escaped \n in macros screws up things.)
# https://public.kitware.com/Bug/view.php?id=15369
file(READ ${GCOV_FILE} GCOV_CONTENTS)
string(REPLACE "[" "_" GCOV_CONTENTS "${GCOV_CONTENTS}")
string(REPLACE "]" "_" GCOV_CONTENTS "${GCOV_CONTENTS}")
string(REPLACE "\\" "_" GCOV_CONTENTS "${GCOV_CONTENTS}")
file(WRITE ${GCOV_FILE}_tmp "${GCOV_CONTENTS}")
file(STRINGS ${GCOV_FILE}_tmp GCOV_LINES)
list(LENGTH GCOV_LINES LINE_COUNT)
# Instead of trying to parse the source from the
# gcov file, simply read the file contents from the source file.
# (Parsing it from the gcov is hard because C-code uses ; in many places
# which also happens to be the same as the CMake list delimeter).
file(READ ${GCOV_SRC_PATH} GCOV_FILE_SOURCE)
string(REPLACE "\\" "\\\\" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
string(REGEX REPLACE "\"" "\\\\\"" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
string(REPLACE "\t" "\\\\t" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
string(REPLACE "\r" "\\\\r" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
string(REPLACE "\n" "\\\\n" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
# According to http://json.org/ these should be escaped as well.
# Don't know how to do that in CMake however...
#string(REPLACE "\b" "\\\\b" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
#string(REPLACE "\f" "\\\\f" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
#string(REGEX REPLACE "\u([a-fA-F0-9]{4})" "\\\\u\\1" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
# We want a json array of coverage data as a single string
# start building them from the contents of the .gcov
set(GCOV_FILE_COVERAGE "[")
set(GCOV_LINE_COUNT 1) # Line number for the .gcov.
set(DO_SKIP 0)
foreach (GCOV_LINE ${GCOV_LINES})
#message("${GCOV_LINE}")
# Example of what we're parsing:
# Hitcount |Line | Source
# " 8: 26: if (!allowed || (strlen(allowed) == 0))"
string(REGEX REPLACE
"^([^:]*):([^:]*):(.*)$"
"\\1;\\2;\\3"
RES
"${GCOV_LINE}")
# Check if we should exclude lines using the Lcov syntax.
string(REGEX MATCH "LCOV_EXCL_START" START_SKIP "${GCOV_LINE}")
string(REGEX MATCH "LCOV_EXCL_END" END_SKIP "${GCOV_LINE}")
string(REGEX MATCH "LCOV_EXCL_LINE" LINE_SKIP "${GCOV_LINE}")
set(RESET_SKIP 0)
if (LINE_SKIP AND NOT DO_SKIP)
set(DO_SKIP 1)
set(RESET_SKIP 1)
endif()
if (START_SKIP)
set(DO_SKIP 1)
message("${GCOV_LINE_COUNT}: Start skip")
endif()
if (END_SKIP)
set(DO_SKIP 0)
endif()
list(LENGTH RES RES_COUNT)
if (RES_COUNT GREATER 2)
list(GET RES 0 HITCOUNT)
list(GET RES 1 LINE)
list(GET RES 2 SOURCE)
string(STRIP ${HITCOUNT} HITCOUNT)
string(STRIP ${LINE} LINE)
# Lines with 0 line numbers are metadata and can be ignored.
if (NOT ${LINE} EQUAL 0)
if (DO_SKIP)
set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}null, ")
else()
# Translate the hitcount into valid JSON values.
if (${HITCOUNT} STREQUAL "#####")
set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}0, ")
elseif (${HITCOUNT} STREQUAL "-")
set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}null, ")
else()
set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}${HITCOUNT}, ")
endif()
endif()
endif()
else()
message(WARNING "Failed to properly parse line (RES_COUNT = ${RES_COUNT}) ${GCOV_FILE}:${GCOV_LINE_COUNT}\n-->${GCOV_LINE}")
endif()
if (RESET_SKIP)
set(DO_SKIP 0)
endif()
math(EXPR GCOV_LINE_COUNT "${GCOV_LINE_COUNT}+1")
endforeach()
message("${GCOV_LINE_COUNT} of ${LINE_COUNT} lines read!")
# Advanced way of removing the trailing comma in the JSON array.
# "[1, 2, 3, " -> "[1, 2, 3"
string(REGEX REPLACE ",[ ]*$" "" GCOV_FILE_COVERAGE ${GCOV_FILE_COVERAGE})
# Append the trailing ] to complete the JSON array.
set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}]")
# Generate the final JSON for this file.
message("Generate JSON for file: ${GCOV_SRC_REL_PATH}...")
string(CONFIGURE ${SRC_FILE_TEMPLATE} FILE_JSON)
set(JSON_GCOV_FILES "${JSON_GCOV_FILES}${FILE_JSON}, ")
endforeach()
# Loop through all files we couldn't find any coverage for
# as well, and generate JSON for those as well with 0% coverage.
foreach(NOT_COVERED_SRC ${COVERAGE_SRCS_REMAINING})
# Loads the source file as a list of lines.
file(STRINGS ${NOT_COVERED_SRC} SRC_LINES)
set(GCOV_FILE_COVERAGE "[")
set(GCOV_FILE_SOURCE "")
foreach (SOURCE ${SRC_LINES})
set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}0, ")
string(REPLACE "\\" "\\\\" SOURCE "${SOURCE}")
string(REGEX REPLACE "\"" "\\\\\"" SOURCE "${SOURCE}")
string(REPLACE "\t" "\\\\t" SOURCE "${SOURCE}")
string(REPLACE "\r" "\\\\r" SOURCE "${SOURCE}")
set(GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}${SOURCE}\\n")
endforeach()
# Remove trailing comma, and complete JSON array with ]
string(REGEX REPLACE ",[ ]*$" "" GCOV_FILE_COVERAGE ${GCOV_FILE_COVERAGE})
set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}]")
# Generate the final JSON for this file.
message("Generate JSON for non-gcov file: ${NOT_COVERED_SRC}...")
string(CONFIGURE ${SRC_FILE_TEMPLATE} FILE_JSON)
set(JSON_GCOV_FILES "${JSON_GCOV_FILES}${FILE_JSON}, ")
endforeach()
# Get rid of trailing comma.
string(REGEX REPLACE ",[ ]*$" "" JSON_GCOV_FILES ${JSON_GCOV_FILES})
set(JSON_GCOV_FILES "${JSON_GCOV_FILES}]")
# Generate the final complete JSON!
message("Generate final JSON...")
string(CONFIGURE ${JSON_TEMPLATE} JSON)
file(WRITE "${COVERALLS_OUTPUT_FILE}" "${JSON}")
message("###########################################################################")
message("Generated coveralls JSON containing coverage data:")
message("${COVERALLS_OUTPUT_FILE}")
message("###########################################################################")