Release 4.15 (release date: 2015-09-08)

Bug Fixes

  • Fixed an OverflowError in apitools that caused download failures for large files on 32-bit machines.
  • Removed unnecessary sending of range headers for downloads when using the XML API.
  • Fixed a bug that caused perfdiag to report extremely high throughput when the -p flag was unspecified and exactly one of the -c or -k flags were specified.
  • Fixed a ValueError that occurred on Python 2.6 with sliced object downloads.

Other Changes

  • HTTP connections for downloads and uploads in the JSON API are now re-used per-thread.
  • When gsutil's automatic update feature prompts and the user chooses to update, gsutil will now exit with status code 1 after updating (because the original command was not executed).
  • The cp -A flag is disabled when using gsutil -m to ensure that ordering is preserved when copying between versioned buckets.

Release 4.14 (release date: 2015-08-24)

New Features

  • Implemented Sliced Object Download feature. This breaks up a single large object into multiple pieces and downloads them in parallel, improving performance. The gsutil cp, mv and rsync commands now use this by default when compiled crcmod is available for performing fast end-to-end integrity checks. If compiled crcmod is not available, normal object download will be used. Sliced download can be used in conjunction with the global -m flag for maximum performance to download multiple objects in parallel while additionally slicing each object. See the “SLICED OBJECT DOWNLOAD” section of “gsutil help cp” for details. Note: sliced download may cause performance degradation for disks with very slow seek times. You can disable this feature by setting sliced_object_download_threshold = 0 in your .boto configuration file.
  • Added rthru_file and wthru_file test modes to perfdiag, allowing measurement of reads and writes from a disk. This also allows measurement of transferring objects too large to fit in memory. The size restriction of 20GiB has been lifted.
  • perfdiag now supports a -p flag to choose a parallelism strategy (slice, fan, or both) when using multiple threads and/or processes.

Bug Fixes

  • Fixed an IOError that could occur in apitools when acquiring credentials using multiple threads and/or processes on Google Compute Engine.
  • Fixed a bug where rm -r would attempt to delete a nonexistent bucket.
  • Fixed a bug where a default object ACL could not be set or changed to empty.
  • Fixed a bug where cached credentials corresponding to an old account could be used (for example, credentials associated with a prior .boto configuration file).
  • Fixed a bug in apitools for retrieving byte ranges of size 1 (for example, “cat -r 1-1 ...”)
  • Fixed a bug that caused the main gsutil process to perform all work leaving all gsutil child processes idle.
  • Fixed a bug that caused multiple threads not to be used when multiprocessing was unavailable.
  • Fixed a bug that caused rsync to skip files that start with “.” when the -r option was not used.
  • Fixed a bug that caused rsync -C to bail out when it failed to read a source file.
  • Fixed a bug where gsutil stat printed unwanted output to stderr.
  • Fixed a bug where a parallel composite upload could return a nonzero exit code even though the upload completed successfully. This occurred if temporary component deletion triggered a retry but the original request succeeded.
  • Fixed a bug where gsutil would exit with code 0 when both running in debug mode and encountering an unhandled exception.
  • Fixed a bug where gsutil would suggest using parallel composite uploads multiple times.

Other Changes

  • Bucket removal is now supported even if billing is disabled for that bucket.
  • Refactored Windows installs to no longer use any multiprocessing module functions, as gsutil has never supported multiple processes on Windows. Multithreading is unaffected and still available on Windows.
  • All downloads are now written to a temporary file with a “_.gstmp” suffix while the download is still in progress.
  • Re-hashing of existing bytes when resuming downloads now displays progress.
  • Reduced the total number of multiprocessing.Manager processes to two.
  • The rm command now correctly counts the number of objects that could not be removed.
  • Increased the default retries to match the Google Cloud Storage SLA. By default, gsutil will now retry 23 times with exponential backoff up to 32 seconds, for a total timespan of ~10 minutes.
  • Improved bucket subdirectory checks to a single HTTP call. Detection of _$folder$ placeholder objects is now eventually consistent.
  • Eliminated two unnecessary HTTP calls when performing uploads via the cp, mv, or rsync commands.
  • Updated documentation for several topics including acl, cache-control, crcmod, cp, mb, rsync, and subdirs.
  • Added a warning about using parallel composite upload with NEARLINE storage-class buckets.

Release 4.13 (release date: 2015-06-03)

New Features

  • Added -U flag to cp and rsync commands to allow skipping of unsupported object types.
  • Added support for Google Developer Shell credentials.

Bug Fixes

  • Precondition headers (x-goog-if-...) are now respected for the setmeta command.
  • Fixed an index out of range error that could occur with an empty parallel composite upload tracker file.
  • The stat command outputs errors to stderr instead of stdout.
  • Fixed two possible sources of ResumableUploadStartOverException from httplib2 and oauth2client.
  • Fixed a bug in the compose command where a missing source object resulted in an error message claiming the destination object was missing.

Other Changes

  • Added a help section on throttling gsutil.
  • Resumable uploads will now start over if a PUT to the upload ID returns an HTTP 404. Previously this behavior applied only to an HTTP 410.
  • XML API resumable uploads now retry on HTTP 429 errors, matching the behavior of JSON API resumable uploads.
  • Improved response to process kill signals, reducing the likelihood of leaving orphaned child processes and temporary files.
  • Bucket lifecycle configuration now works for S3.
  • Removed the deprecated setmeta -n option.

Release 4.12 (release date: 2015-04-20)

New Features

  • Added support for JSON-format service account private key files.
  • Added support for the Rewrite API (JSON API only). This is used for all copies within the Google Cloud and supports copying objects across storage classes and/or locations.

Bug Fixes

  • Fixed a bug that could cause downloads to have a hash mismatch (and deletion of the corrupted file) when resumed across process breaks via a tracker file.

Other Changes

  • Updated documentation and examples for several topics including acl, cp, dev, signurl, stat, and wildcards.

Release 4.11 (release date: 2015-03-10)

New Features

  • Added Nearline storage class support to the mb command.

Bug Fixes

  • Fixed a bug for streaming uploads that could occasionally cause a HTTP 410 from the service or a hash mismatch (and deletion of the corrutped file).
  • Fixed an OverflowError that occurred when uploading files > 4GiB on a 32-bit operating system.

Other Changes

  • Added documentation around using the Content-MD5 header to extend integrity checking to include checksums computed by a client-side content pipeline.

Release 4.10 (release date: 2015-03-03)

Bug Fixes

  • Fixed a bug that could cause undetected data corruption (preserving incorrect data) if a streaming upload encountered a service error on non-8KiB-aligned boundary.
  • Fixed a bug that caused downloads to be truncated if the connection broke, resulting in a hash mismatch (and deletion of the corrupted file) for that download.
  • Fixed a format string arguments error that occurred if a download exhausted all retries.

Other Changes

  • The lifecycle command now accepts JSON input in the form of “{ “lifecycle”: { “rule” ...” in addition to “{ “rule”: ...”.
  • Improved access token expiry logic for GCE credentials.

Release 4.9 (release date: 2015-02-13)

New Features

  • When using the JSON API, the ch acl/defacl subcommand now supports project groups via the -p flag. For details, see “gsutil help acl ch”.

Bug Fixes

  • Fixed a bug that caused daisy-chain copies (including cross-provider copies) for files large than 100MiB to fail.
  • Fixed a bug that caused streaming uploads than ran for longer than an hour to fail with HTTP 400s.
  • Fixed a bug where perfdiag would not properly clean up its test files.
  • Fixed a bug where using ls with the XML API could mistakenly report bucket configuration as present.

Other Changes

  • Updated documentation for metadata, retries, security, and subdirs.
  • Tracker files are no longer written for small downloads.

Release 4.8 (release date: 2015-01-23)

New Features

  • gsutil now supports HTTP proxy configuration via the http_proxy, https_proxy, or HTTPS_PROXY environment variables. This configuration is used only if proxy configuration is not present in the .boto configuration file.
  • gsutil rsync now supports regex-based source and destination URL exclusion via the -x flag.
  • The rm command now supports arguments on stdin via the -I flag.

Bug Fixes

  • Fixed a bug where perfdiag would fail if netstat was not available.
  • Fixed a bug where temporary ca_certs files were not being cleaned up.
  • Fixed a bug in rsync to unnecessarily remove or write objects, in some cases leaving the destination in a non-synchronized state. caused rsync to unnecessarily remove or rewrite objects.
  • Fixed a bug where rsync temporary listing files were not being cleaned up when the rsync process was killed.
  • Fixed a bug where rsync would remove destination URLs if listing the source encountered a non-retryable failure (for example, if the source did not exist).
  • Fixed a bug where mv would fail for some Unicode filenames.
  • Fixed a bug where mv would remove the source URL after skipping the destination URL.
  • Fixed a bug that caused daisy chain uploads to hang if the download thread raised an exception.
  • Fixed a bug where acl ch would return a zero exit code even if it failed.
  • Fixed a bug that sometimes caused the progress display to render multiple times at the end of an upload or download.

Other Changes

  • Resumable uploads of files using the JSON API now send their data in a single request, making separate HTTP calls only when resuming is necessary.
  • The test command now runs tests in parallel by default, and test parallelism on Windows is now supported.
  • All non-streaming downloads are now resumable (and retryable) by default, regardless of size.
  • Canned ACLs and canned default object ACLs are now supported in the JSON API (previously they would fall back to using the XML API).
  • Google Compute Engine service account credential tokens are now cached, avoiding unnecessary refreshes.
  • Improved detection of the Google Compute Engine metadata server, particularly when using the -m flag for multiprocessing.
  • Added new help sections about filename encoding and security/privacy considerations.
  • Download progress is now displayed for small XML API downloads.

Release 4.7 (release date: 2014-11-17)

New Features

  • Tab completion now works on gs:// URLs (for Cloud SDK installs only). To install via Cloud SDK, see https://cloud.google.com/sdk/#Quick_Start
  • Streaming uploads (with source URL “-”) using the JSON API now buffer in-memory up to 100MB, allowing large streams to be retried in the event of network flakiness or service errors.
  • Resumable uploads that receive a fatal service error (typically a 410) are now automatically retried from the beginning.

Bug Fixes

  • Fixed an apitools bug that impacted upload performance and caused “Retrying from byte __ after exception” to print after every 100MiB.
  • Fixed _$folder$ placeholder object detection on versioned buckets.
  • Removed an unnecessary credential check on load which increased startup time by over one second in some cases.
  • SignURL now properly retries when checking if the signed object is readable.
  • Files with both Content-Encoding and Content-Type gzip are now properly removed when hash validation fails (only one of the two should be set).
  • The x-goog-if-generation-match:0 header now works properly with the XML API.
  • Fixed a bug that caused “defacl ch” on a bucket with a private ACL to fail.
  • The rm command now properly supports precondition headers.
  • Fixed a bug that caused large streaming uploads to fail with the message “Failure: length too large” when using the JSON API.
  • Fixed a bug that caused JSON lifecycle configurations with createdBefore conditions to fail with a DecodeError.

Other Changes

  • Byte counts now display accurate abbreviations of binary sizing. For example, messages previously labeled MB are now properly labeled MiB to indicate 2**20 bytes. Only the labeling changed - the actual sizes were always binary.
  • Improved Cloud SDK integration, including improved error messages and instructions.
  • The num_retries .boto configuration value now applies to all requests (previously it was ignored for JSON API requests).
  • rsync now works with non-existent destination subdirectories.
  • Raised the default resumable upload threshold from 2MB to 8MB to improve performance.
  • Benign retry messages now print only when debug mode is enabled via the top-level -d flag.
  • The top-level -q flag now suppresses suggestions to use the -m flag.
  • Command synopsis is now output when the wrong number of arguments are provided.
  • Removed dependency on google-api-python-client module, added dependencies on oauth2client and six modules.

Release 4.6 (release date: 2014-09-08)

Bug Fixes

  • Fixed a TypeError bug that occurred in perfdiag write throughput tests.
  • Fixed an rsync bug that caused invalid symlinks to abort the transfer even when -e option was specified.
  • Fixed a perfdiag assumption that ipaddrlist was populated.
  • Fixed an AttributeError when setting an invalid canned ACL with defacl set.
  • Fixed a bug where non-resumable uploads would include payload in debug output when for running in debug mode (-D).

Other Changes

  • Added the proxy_rdns configuration variable for clients that do DNS lookups via a proxy.
  • Added the state_dir configuration variable for choosing the location of gsutil's internal state files, including resumable transfer tracker files. resumable_tracker_dir configuration variable is now deprecated.
  • Added DNS, connection latency, and proxy use information to perfdiag command.
  • perfdiag command will not perform DNS lookups if they are disabled in boto config.
  • perfdiag command will now only attempt to delete uploaded objects when running write tests.
  • Added code coverage support to test command.
  • rsync -d now succeeds on a 404 for a to-be-deleted object (for example, when the object was already deleted by an external process).

Release 4.5 (release date: 2014-08-14)

Bug Fixes

  • Fixed a bug that caused resumable uploads to restart if gsutil was terminated with CTRL-C.
  • Fixed a bug in defacl ch command that caused a failure when updating an existing default object ACL entry.
  • Fixed an invalid literal bug during rsync file listing.
  • Made several improvements to JSON upload stability, including fixing a bug which occasionally caused resumable upload hashes not to catch up properly.
  • All JSON calls now have socket timeouts, eliminating hangs under flaky network conditions.
  • Fixed a bug where acl ch -g AllAuthenticatedUsers would instead add AllUsers.
  • Fixed a bug that caused object custom metadata not to be preserved when copying in the cloud.
  • Fixed a bug where du -s did not properly elide subdirectories.

Other Changes

  • Parallel composite uploads are now disabled by default until crcmod is available in major Linux distributions. To re-enable the setting from prior versions, in the [GSUtil] section of your .boto config file, add: parallel_composite_upload_threshold=150M
  • Non-wildcarded URLs for existing objects now use Get before trying List (as in gsutil3), and thus are not subject to eventual listing consistency.
  • gsutil -D now redacts proxy configuration values in the output.

Release 4.4 (release date: 2014-07-17)

New Features

  • Added the hash command, which can calculate hashes of local files. gsutil already calculates hashes for integrity checking, but this allows the user to separately calculate the MD5 and CRC32c hashes of a local file.

Bug Fixes

  • Many improvements to JSON API media transfers, including far more robust retry logic.
  • Fixed “File changed during upload: EOF...” errors on XML resumable uploads.
  • Fixed rsync command to read and write index files in binary mode.
  • Fix potential TypeError in _CheckAndHandleCredentialException.
  • Fixed possible data corruption when using JSON API uploads for small files with lines starting with “From:”, which would cause integrity checks to fail.
  • Fixed gsutil cp to skip directory placeholders when downloading, avoiding “directory exists where the file needs to be created” errors.
  • Fixed daisy chain cp/rsync for files >= 100MB.
  • Fixed a bug in JSON proxy support where the proxy info was sometimes unused.
  • Fixed a bug where an acl get on a private default object ACL returned an error instead of a blank ACL.
  • Fixed a JSON API issue with large HTTP responses on 32-bit systems.

Other Changes

  • Improved object listing performance when using the XML API.
  • Improved various error messages.
  • Improved progress display during media transfer.
  • Switched to truncated exponential backoff for retries.
  • Improved OS-specific ulimit checks.
  • Added some information such as OS and Cloud SDK wrapping to gsutil version, and changed the output format to be more uniform.
  • Daisy chain cp/rsync now supports resumable uploads.
  • Improved proxy support for proxy username and passwords.
  • x-amz headers are now supported for cp, rsync, and setmeta. x-amz-meta headers continue to be supported as well.

Release 4.3 (release date: 2014-06-10)

Bug Fixes

  • Fix acl/defacl ch changing the role of an existing group.
  • Fix unicode and 404 errors when using manifests.
  • Fix parallelism configuration bug that limited gsutil rsync to two threads and could lead to rsync hangs. “gsutil -m rsync” runs much faster, and rsync uploads of large local files are now faster via parallel composite upload. Parallel composite uploads of large files are also faster.
  • Fix rsync bug with parallel composite uploads.
  • Fix TypeError that could occur when running the cp command with no credentials.

Other Changes

  • Progress indicators for -m cp/rsync commands are now more readable.
  • Added command being run to gsutil -d/-D output.
  • Lowered default parallelism for ‘gsutil -m test’ and added hang detection.

Release 4.2 (release date: 2014-06-05)

New Features

  • Added parallel test execution support to test command, ex: “gsutil -m test”

Bug Fixes

  • Fix failure during retry of an XML download.
  • Moved to boto release 2.29.1 fixing boto authentication erroneously reporting OAuth2 credentials as invalid.
  • Fix parallel composite uploads when using only a single process and thread.
  • Fix an invalid seek during daisy chain operation that affected file copy from Google Cloud Storage -> S3 for files greater than 8KB in size.
  • Fix “gsutil acl ch” with AllUsers or AllAuthenticatedUsers groups.
  • Fix some copy errors writing new lines to the manifest file.
  • Fix “gsutil test” return code to properly be 0 on success.

Other Changes

  • “gsutil cp -z” now ignores whitespace in the extension list.

Release 4.1 (release date: 2014-05-28)

Bug Fixes

  • Fixed a bug in parallel composite uploads where uploads with existing components would fail.
  • Moved gcs-oauth2-boto-plugin to version 1.5, fixing a bug in the PyPi gsutil distribution that would cause gsutil to unnecessarily attempt to query the Google Compute Engine metadata service.

Other Changes

  • Parallel composite uploads no longer specify an if-not-match precondition when uploading component parts.
  • Parallel composite uploads no longer calculate a CRC32c hash prior to uploading component parts (these are still validated by an MD5 hash).
  • Removed apitools dependency on gflags.

Release 4.0 (release date: 2014-05-27)

Major New Gsutil Version - Backwards-Incompatible Changes

  • The Google Cloud Storage configuration data supported by the acl, cors, and lifecycle commands now uses the JSON format instead of the older XML format. gsutil 4.0 will fail and provide conversion instructions if an XML configuration file is provided as an argument for a gs:// URL.
  • gsutil no longer accepts arbitrary headers via the global -h flag. Documented headers for gsutil commands are still supported; for the full list of supported headers, see “gsutil help command_opts”.
  • The compose command will now default the destination object's Content-Type to the Content-Type of the first source object if none is provided via the -h global flag.
  • The long-deprecated -t and -q options have been removed from the cp command.
  • The perfdiag command no longer supports adding a host header.
  • Having OAuth2 User Account credentials and OAuth2 Service Account credentials configured simultaneously will now fail with an error message to avoid confusion. Also, a single invalid credential will fail with an error message. See “gsutil help creds” for details.
  • Bucket relocate scripts have been removed.
  • Downloading object names ending with ‘/’ is no longer supported to avoid problems this caused for directores using the Google Cloud Console.
  • rm -r now implies rm -ra (removing all object versions recursively).
  • All commands using the global -m option or a force option (such as rm -f or cp -c) will now return a non-zero exit code if there are any failures during the operation.
  • MD5 and CRC32c values are now represented in base64 encoding instead of hex encoding (this includes manifest files).

New Features

  • The Google Cloud Storage JSON API (v1) is now the default API used by gsutil for all commands targeting gs:// URLs. The JSON API is more bandwidth efficient than the older XML API when transferring metadata and does not require separate calls to preserve object ACLs when copying. The XML API will automatically be used when accessing s3:// URLs.
  • The Google Cloud Storage XML API can be used in lieu of the JSON API by setting ‘prefer_api = xml’ in the GSUtil section of your boto config file.
  • Added the rsync command that can synchronize cloud and local directories.
  • Added the signurl command that can generate Google Cloud Storage signed URLs.
  • The perfdiag command now supports a listing latency test.
  • The rb command now supports a -f flag allowing it to continue when errors are encountered.
  • The test command now supports a -s flag that runs tests against S3.

Other Changes

  • All python files not under a third_party directory are now pylint-clean, with the exception of TODO-format and a handful of warnings in root-level files. As part of the de-linting process, many edge-case bugs were identified and fixed.
  • The ls command now operates depth-first (as in Unix ls) instead of breadth-first.
  • Daisy-chain copying does not currently support resumable uploads.
  • Several compatibility improvements for Windows and S3.

Release 3.42 (release-date: 2014-01-15)

Other Changes

  • Fixed potential bug with update command on CentOS.

Release 3.41 (release-date: 2014-01-14)

Other Changes

  • Changes to protect security of resumable upload IDs.

Release 3.40: Skipped

Release 3.39: Skipped

Release 3.38 (release-date: 2013-11-25)

Bug Fixes

  • Fix to include version number in user-agent string.
  • Fix bug wherein -m flag or parallel uploads caused crash on systems without /dev/shm.
  • Fix SSL errors and invalid results with perfdiag -c and -k rthru test.
  • Fixed cases where parallel composite uploads could leave orphaned components.
  • Fix bug attempting to stat objects you don't have auth to read.
  • Fixed bug breaking defacl's -d option.

Other Changes

  • Fixed gsutil config doc.
  • Fixed references to old command names; fix defacl ch example.
  • Improved error messages for deprecated command aliases.
  • Updated gsutil support info.

New Features

  • Enabled -R flag for recursion with setmeta command.

Release 3.37 (release-date: 2013-09-25)

Bug Fixes

  • Fix parsing of -R for “acl ch” and chacl commands.
  • Fixed import statement of unittest2 which caused installations using Python 2.6 without unittest2 installed to fail when starting up gsutil.

Other Changes

  • Fixed tests so they pass on Windows and package installs.
  • Add a root logging handler manually instead of relying on basicConfig.
  • Fix apiclient import statement.
  • Exponential backoff for access token requests.
  • Fix flakiness in test TearDown to account for eventual consistency of object listings.

Release 3.36 (release-date: 2013-09-18)

Bug Fixes

  • Fix bug when a 400 or 403 exception has no detail.
  • Fix bugs with config -e and config -o.

Other Changes

  • Clarify stat command documentation regarding trailing slashes.
  • Add Generation and Metageneration to gsutil stat output.

New Features

  • Set config values from command line with -o.

Release 3.35 (release-date: 2013-09-09)

Bug Fixes

  • Fix streaming upload to S3 and provide more useful stack traces multi-threaded failures.
  • Fix race condition in test_rm.
  • Fix retry decorator during test bucket cleanup.
  • Fixed cat bug that caused version to be ignored in URIs.
  • Don't decode -p or -h values other than x-goog-meta-. Fixes ability to use string project names.
  • Update bucket_relocate.sh to work on GCE.
  • Fix recursive uploading from subdirectories with unexpanded wildcard as source URI.
  • Make gsutil error text include content.
  • Change shebang line back to python because this doesn't work on some systems.
  • Fix hash_algs differences in perfdiag.
  • Update Python version check and shebang line.
  • Enforce project_id entry in config command; provide friendly error if missing proj ID.
  • Use transcoding-invariant headers when available in gs.Key.
  • Make gsutil cp not fail if unable to check versioning config on dest bucket.
  • Make gsutil detect when config fails because of proxy and prompt for proxy config.
  • Avoid checking metageneration attribute when long-listing S3 objects.
  • Exclude the no-op auth handler as indicating credentials are configured.

New Features

  • Implemented gsutil stat command.

Other Changes

  • Consolidate config-related commands.
  • Changed rm -r gs://bucket to delete bucket at end.
  • Various doc cleanup and improvement.
  • Warn user before updating to major new version. Also fixed minor version comparison bug, and added tests.
  • Change max component count to 1024.
  • Add retry-decorator as a submodule.
  • Explicitly state control chars to avoid in gsutil naming documentation.
  • Make config command recommend project strings.
  • Made long listing format a little better looking.
  • Allow --help flag for subcommands.
  • Implement help for subcommands and add OPTIONS sections for subcommands.
  • Add more detailed error message to notification watchbucket command.
  • Add notification URL configuration for notification tests.
  • Refactor to use upstream retry_decorator as external dependency.
  • Distribute cacerts file with gsutil.
  • Updated gsutil help to point to Google Cloud Console instead of older APIs console.
  • Make gsutil pass bundled cacerts.txt to oauth2client; stop checking SHA1 of certs, now that we no longer depend on boto distribution.
  • Move all TTY checks to a common util function and mock it for update tests.
  • Fix duplicate entry created in .gitmodules.
  • Fix unit test breakage because VERSION file is old.
  • Fix test using ? glob with ObjectToURI.
  • Fix update tests that fail for package installs.
  • Change bucket delete teardown to try more times.
  • Fix tests that perform operations on bucket listings.
  • Keep package install set to True unless VERSION file doesn't exist.
  • Fix handling of non-numeric version strings in update test.

Release 3.34 (release-date: 2013-07-18)

Bug Fixes

  • Fixed a bug where the no-op authentication handler was being loaded after other authentication plugins, causing the no-op handler to be chosen instead of other valid credentials.

Release 3.33 (release-date: 2013-07-16)

Bug Fixes

  • Added .git* to MANIFEST.in excludes and fixed cp doc typo. This was needed to overcome problem caused by accidental inclusion of .git* files in release, which caused the update command no longer to allow updates (since starting in 3.32 it checks whether the user has any extraneous files in the gsutil directory before updating)

Release 3.32 (release-date: 2013-07-16)

New Features

  • Added support for getting and setting lifecycle configuration for buckets.
  • Implemented Parallel Composite Uploads.
  • Added a new du command that displays object size, similar to Linux du.

Bug Fixes

  • Fixed a bug when using ls -R on objects with trailing slashes. Closes #93.
  • Fixed so won't crash in perfdiag when nslookup is missing or gethostbyname fails.
  • Smartly compare version strings during autoupdate check.
  • Made header handling for upload case-insensitive.
  • Re-enabled software update check for users with no credentials configured.
  • Fixed incorrectly-generated password editing comment in service account config. Fixes #146.

Other Changes

  • Improved flow when encounter auth failure for GCE service account with no configured storage scopes:
    1. Changed HasConfiguredCredentials() logic not to include has_auth_plugins as part of the evaluated expression, since that will always evaluate to true under GCE (since GCE configures its internal service account plugin under /etc/boto.cfg).
    2. Changed ConfigureNoOpAuthIfNeeded logic so we configure no-op auth plugin even if there is a config_file list, since GCE always configures /etc/boto.cfg, even if user has no storage scopes configured.
    3. Additional changes: a. Removed assertion of oauth access token cache check log from test_Doption.py, which may not be true sometimes (e.g., if user is using HMAC creds). b. Removed remnants of CONFIG_REQUIRED left over from earlier CL. c. Merged dupe _ConfigureNoOpAuthIfNeeded functions from two code files, moved to util.py.
  • Fixed confusing gsutil rm “Omitting” message.
  • Wrapped long gsutil update message.
  • Silenced additional possible perfdiag errors.
  • Improved perfdiag performance by only generating one chunk of random file.
  • Changed to swallow broken pipe errors when piping gsutil to other programs.
  • Made DotfulBucketNameNotUnderTld error message more user friendly.
  • Extracted function for building ACL error text from main try/except loop, for better readability.
  • Disallowed gsutil update when user data present in gsutil dir.
  • Plumbed accept-encoding into HEAD requests in ls -L command.
  • Updated README and moved ReleaseNotes.txt to CHANGES.md.
  • Updated crcmod docs with link to Windows installer.
  • Updated documentation regarding gzip content-encoding.
  • Removed StorageUri parse check for lone ‘:’ (interferes with using filenames containing ‘:’)
  • Added tests for gsutil update check and fixed bug for bad file contents.
  • Set accept-encoding and handle gzip on-the-fly encoding.

Release 3.31 (release-date: 2013-06-10)

New Features

  • Implemented consumption of manifest files for cp.
  • Add ETag to ls -l and make ls -b variants more efficient.
  • Expand the manifest path to allow for tildes in paths.
  • Added bucket_relocate.sh script to gsutil.

Bug Fixes

  • Fix gsutil cp -R to copy all versioned objects.
  • Fixed bug where gsutil cp -D -n caused precondition failure.
  • Fixed gsutil daisy-chain copy to allow preserving ACLs when copying within same provider.
  • Fix identification of non-MD5 ETags.
  • Fixed bugs where gsutil -q cp and gsutil cp -q sometimes weren't quiet.
  • Fixed unicode error when constructing tracker filename from non-ASCII Unicode filename.
  • Fixed that noclobber would not resume partial resumable downloads.
  • Fixed bug when running gsutil cp -Dp by user other than object owner.
  • Properly encode metageneration and etag in ls output with -a and -e.
  • Update resumable threshold stated in gsutil help prod.

Other Changes

  • ls -Lb no longer shows total # files/total size of bucket, so that ls -Lb instead provides an efficient way to view just the metadata for large buckets.
  • Catch and ignore EEXIST error when creating gsutil tracker dir.
  • Add note to gsutil update doc about auto-update checks being disabled with gsutil -q option.
  • Disable hashing and increase buffer size in perfdiag.
  • Added better error messages for service account auth.
  • Make perfdiag behave more like normal gsutil, with multi-threading option.
  • Changed so auto-update check/prompt aren't made if gsutil -q specified.
  • Changed gsutil mb command to clarify that EU means European Union.
  • Added doc warnings about losing version ordering if using gsutil -m cp between versioned buckets; removed trailing whitespace.
  • Added to gsutil cp -L doc to describe how to build a reliable script for copying many objects.

Release 3.30 (release-date: 2013-06-10)

  • Abandoned.

Release 3.29 (release-date: 2013-05-13)

Bug Fixes

  • Fixed incorrect package installation detection that resulted in not being able to run the update command while running gsutil from a symlink.

Other Changes

  • Added a test for debug mode (gsutil -D) output.
  • List numbering and title case fixes in additional help pages.
  • Removed dateutil module dependency from cp command test.
  • Updated documentation to clarify that public-read objects are cached for 1 hour by default.
  • Added a filter to suppress “module was already imported” warnings that were sometimes printed while running gsutil on Google Compute Engine instances.

Release 3.28 (release-date: 2013-05-07)

New Features

  • Added support for new Object Change Notifications feature.

Bug Fixes

  • Fixed problem where gsutil update command didn’t take default action.
  • Fixed a problem with the update command sometimes triggering an additional update command.

Other Changes

  • Add packaging information to version output.
  • Removed fancy_urllib, since it is no longer used.
  • Changed num_retries default for resumable downloads to 6.
  • Don’t check for newer software version if gs_host is specified in boto config file.
  • Modified oauth2client logging behavior to be consistent with gsutil.
  • Added gs_port configuration option.
  • Skip update tests when SSL is disabled.

Release 3.27 (release-date: 2013-04-25)

New Features

  • Added a human readable option (-h) to ls command.
  • Changed WildcardIterator not to materialize list of all matching files from directory listing (so works faster when walking over large directories)
  • Added -f option to setacl command to allow command to continue after errors encountered.
  • Add manifest log support for the cp command.
  • Added never option for check_hashes_config; fixed bug that assumes an ETag is always returned from server.
  • Made gsutil provide friendlier error message if attempting non-public data access with missing credentials.
  • Set 70 second default socket timeout for httplib.
  • Add ability to run a single test class or function with the test command.

Bug Fixes

  • Don't check for updates if the user has no credentials configured. This fixes a bug for users without credentials trying to use gsutil for first time.
  • Fixed case where chacl command incorrectly recognized an email address as a domain.
  • Fix setmeta command for S3 objects.
  • Fixed bug where wildcarded dest URI attempted string op on Key object.
  • Fixed case where gsutil -q outputted progress output when doing a streaming upload.
  • Error handling for out of space during downloads.
  • Include ISO 8601-required “Z” at end of timestamp string for gsutil ls -l, to be spec-compliant.
  • Removed deprecated setmeta syntax and fixed unicode issues.
  • Changed update command not to suggest running sudo if running under Cygwin.
  • Removed references to deprecated gs-discussion forum from gsutil built-in help.
  • Add literal quotes around CORS config example URL in gsutil setcors help to avoid having example URL turn into an HREF in auto-generated doc.

Other Changes

  • Added proper setup.py to make gsutil installable via PyPi.
  • Added warning to gsutil built-in help that delete operations cannot be undone.
  • Replaced gsutil's OAuth2 client implementation with oauth2client.
  • Updates to perfdiag.
  • Updated config help about currently supported settings.
  • Fixes to setup.py and modified version command.
  • Move gslib/commands/cred_types.py to gslib, so only Command subclasses live in gslib/commands.
  • Updated gsutil setmeta help no longer to warn that setmeta with versioning enabled creates a new object.

Release 3.26 (release-date: 2013-03-25)

New Features

  • Added support for object composition.
  • Added support for external service accounts.
  • Changed gsutil to check for available updates periodically (only while stdin, stderr, stdout are connected to a TTY, so as not to interfere with cron jobs).
  • Added chdefacl command.
  • Made gsutil built-in help available under https://developers.google.com/storage/docs/gsutil
  • Add a command suggestion when the command name is not found.
  • Added byte suffix parsing to the -s parameter of perfdiag.
  • Added --help support to subcommands. Fixes #96.
  • Updated perfdiag command to track availability and record TCP settings.
  • Added metadata parameter to perfdiag command.
  • Added support for specifying byte range to cat command.
  • Output more bucket metadata on ls -Lb.
  • Implemented gsutil -q (global quiet) option (fixes issue #130). Also changed gsutil to output all progress indicators using logging levels. Also changed help command not to output bold escape sequences and not use PAGER if stdout is not a tty, which also fixes bug that caused gsutil help test to fail.
  • Plumbed https_validate_certificates through to OAuth2 plugin handler, allowing control over cert validation for OAuth2 requests
  • Fixed ISO 639.1 ref in config command help text

Bug Fixes

  • Fixed bug where gsutil cp -D didn't preserve metadata
  • Fixed problem where gsutil -m is hard to interrupt (partial fix for issue #99 - only for Linux/MacOS; problem still exists for Windows).
  • Fixed broken reference to boto_lib_dir in update command.
  • Made changing ACL not retry on 400 error.
  • Fixed name expansion bug for case where uri_strs is itself an iterator (issue #131); implemented additional naming unit test for this case.
  • Fixed flaky gsutil rm test
  • Fixed a bug in the chacl command that made it so you couldn't delete the AllAuthenticatedUsers group from an ACL.

Other Changes

  • Refactored gsutil main function into gslib, with gsutil being a thin wrapper.
  • Added a test for the update command.
  • Renamed gsutil meta_generation params to metageneration, for consistency with GCS docs.
  • Removed .pyc files from tarball/zipfile.
  • Added new root certs to cacerts.txt, to provide additional flexibility in the future.

Release 3.25 (release-date: 2013-02-21)

Bug Fixes

  • Fixed two version-specific URI bugs:
    1. gsutil cp -r gs://bucket1 gs://bucket2 would create objects in bucket2 with names corresponding to version-specific URIs in bucket1 (e.g., gs://bucket2/obj#1361417568482000, where the “#1361417568482000” part was part of the object name, not the object's generation).

      This problem similarly caused gsutil cp -r gs://bucket1 ./dir to create files names corresponding to version-specific URIs in bucket1.

    2. gsutil rm -a gs://bucket/obj would attempt to delete the same object twice, getting a NoSuchKey error on the second attempt.

Release 3.24 (release-date: 2013-02-19)

Bug Fixes

  • Fixed bug that caused attempt to dupe-encode a unicode filename.

Other Changes

  • Refactored retry logic from setmeta and chacl to use @Retry decorator.
  • Moved @Retry decorator to third_party.
  • Fixed flaky tests.

Release 3.23 (release-date: 2013-02-16)

Bug Fixes

  • Make version-specific URI parsing more robust. This fixes a bug where listing buckets in certain cases would result in the error ‘BucketStorageUri’ object has no attribute ‘version_specific_uri’

Release 3.22 (release-date: 2013-02-15)

New Features

  • Implemented new chacl command, which makes it easy to add and remove bucket and object ACL grants without having to edit XML (like the older setacl command).
  • Implemented new “daisy-chain” copying mode, which allows cross-provider copies to run without buffering to local disk, and to use resumable uploads. This copying mode also allows copying between locations and between storage classes, using the new gsutil cp -D option. (Daisy-chain copying is the default when copying between providers, but must be explicitly requested for the other cases to keep costs and performance expectations clear.)
  • Implemented new perfdiag command to run a diagnostic test against a bucket, collect system information, and report results. Useful when working with Google Cloud Storage team to resolve questions about performance.
  • Added SIGQUIT (^) handler, to allow breakpointing a running gsutil.

Bug Fixes

  • Fixed bug where gsutil setwebcfg signature didn't match with HMAC authentication.

  • Fixed ASCII codec decode error when constructing tracker filename from non-7bit ASCII input filename.

  • Changed boto auth plugin framework to allow multiple plugins supporting requested capability, which fixes gsutil exception that used to happen where a GCE user had a service account configured and then ran gsutil config.

  • Changed Command.Apply method to be resilient to name expansion exceptions. Before this change, if an exception was raised during iteration of NameExpansionResult, the parent process would immediately stop execution, causing the _EOF_NAME_EXPANSION_RESULT to never be sent to child processes. This resulted in the process hanging forever.

  • Fixed various bugs for gsutil running on Windows:

    • Fixed various places from a hard-coded ‘/’ to os.sep.
    • Fixed a bug in the cp command where it was using the destination URI's .delim property instead of the source URI.
    • Fixed a bug in the cp command's _SrcDstSame function by simplifying it to use os.path.normpath.
    • Fixed windows bug in tests/util.py _NormalizeURI function.
    • Fixed ZeroDivisionError sometimes happening during unit tests on Windows.
  • Fixed gsutil rm bug that caused exit status 1 when encountered non-existent URI.

  • Fixed support for gsutil cp file -.

  • Added preconditions and retry logic to setmeta command, to enforce concurrency control.

  • Fixed bug in copying subdirs to subdirs.

  • Fixed cases where boto debug_level caused too much or too little logging:

    • resumable and one-shot uploads weren't showing response headers when connection.debug > 0.
    • payload was showing up in debug output when connection.debug < 4 for streaming uploads.
  • Removed XML parsing from setacl. The previous implementation relied on loose XML handling, which could truncate what it sends to the service, allowing invalid XML to be specified by the user. Instead now the ACL XML is passed verbatim and we rely on server-side schema enforcement.

  • Added user-agent header to resumable uploads.

  • Fixed reporting bits/s when it was really bytes/s.

  • Changed so we now pass headers with API version & project ID to create_bucket().

  • Made “gsutil rm -r gs://bucket/folder” remove xyz_$folder$ object (which is created by various GUI tools).

  • Fixed bug where gsutil binary was shipped with protection 750 instead of 755.

Other Changes

  • Reworked versioned object handling:

    • Removed need for commands to specify -v option to parse versions. Versioned URIs are now uniformly handled by all commands.
    • Refactored StorageUri parsing that had been split across storage_uri and convenience; made versioned URIs render with version string so StorageUri is round-trippable (boto change).
    • Implemented gsutil cp -v option for printing the version-specific URI that was just created.
    • Added error detail for attempt to delete non-empty versioned bucket. Also added versioning state to ls -L -b gs://bucket output.
    • Changed URI parsing to use pre-compiled regex's.
    • Other bug fixes.
  • Rewrote/deepened/improved various parts of built-in help:

    • Updated ‘gsutil help dev’.
    • Fixed help command handling when terminal does not have the number of rows set.
    • Rewrote versioning help.
    • Added gsutil help text for common 403 AccountProblem error.
    • Added text to ‘gsutil help dev’ about legal agreement needed with code submissions.
    • Fixed various other typos.
    • Updated doc for cp command regarding metadata not being preserved when copying between providers.
    • Fixed gsutil ls command documentation typo for the -L option.
    • Added HTTP scheme to doc/examples for gsutil setcors command.
    • Changed minimum version in documentation from 2.5 to 2.6 since gsutil no longer works in Python 2.5.
    • Cleaned up/clarify/deepen various other parts of gsutil built-in documentation.
  • Numerous improvements to testing infrastructure:

    • Completely refactored infrastructure, allowing deeper testing and more readable test code, and enabling better debugging output when tests fail.
    • Moved gslib/test_*.py unit tests to gslib/tests module.
    • Made all tests (unit and integration, per-command and modules (like naming) run from single gsutil test command.
    • Moved TempDir functions from GsUtilIntegrationTestCase to GsUtilTestCase.
    • Made test runner message show the test function being run.
    • Added file path support to ObjectToURI function.
    • Disabled the test command if running on Python 2.6 and unittest2 is not available instead of breaking all of gsutil.
    • Changed to pass GCS V2 API and project_id from boto config if necessary in integration_testcase#CreateBucket().
    • Fixed unit tests by using a GS-specific mocking class to override the S3 provider.
    • Added friendlier error message if test path munging fails.
    • Fixed bug where gsutil test only cleaned up first few test files.
    • Implemented setacl integration tests.
    • Implemented StorageUri parsing unit tests.
    • Implemented test for gsutil cp -D.
    • Implemented setacl integration tests.
    • Implemented tests for reading and seeking past end of file.
    • Implemented and tests for it in new tests module.
    • Changed cp tests that don't specify a Content-Type to check for new binary/octet-stream default instead of server-detected mime type.
  • Changed gsutil mv to allow moving local files/dirs to the cloud. Previously this was disallowed in the belief we should be conservative about deleting data from local disk but there are legitimate use cases for moving data from a local dir to the cloud, it's clear to the user this would remove data from the local disk, and allowing it makes the tool behavior more consistent with what users would expect.

  • Changed gsutil update command to insist on is_secure and https_validate_certificates.

  • Fixed release no longer to include extraneous boto dirs in top-level of gsutil distribution (like bin/ and docs/).

  • Changed resumable upload threshold from 1 MB to 2 MB.

  • Removed leftover cloudauth and cloudreader dirs. Sample code now lives at https://github.com/GoogleCloudPlatform.

  • Updated copyright notice on code files.

Release 3.21 (release-date: 2012-12-10)

New Features

  • Added the ability for the cp command to continue even if there is an error. This can be activated with the -c flag.
  • Added support for specifying src args for gsutil cp on stdin (-I option)

Bug Fixes

  • Fixed gsutil test cp, which assumed it was run from gsutil install dir.
  • Mods so we send generation subresource only when user requested version parsing (-v option for cp and cat commands).

Other Changes

  • Updated docs about using setmeta with versioning enabled.
  • Changed GCS endpoint in boto to storage.googleapis.com.

Release 3.20 (release-date: 2012-11-30)

New Features

  • Added a noclobber (-n) setting for the cp command. Existing objects/files will not be overwritten when using this setting.

Bug Fixes

  • Fixed off-by-one error when reporting bytes transferred.

Other Changes

  • Improved versioning support for the remove command.
  • Improved test runner support.

Release 3.19 (release-date: 2012-11-26)

New Features

  • Added support for object versions.
  • Added support for storage classes (including Durable Reduced Availability).

Bug Fixes

  • Fixed problem where cp -q prevented resumable uploads from being performed.
  • Made setwebcfg and setcors tests robust wrt XML formatting variation.

Other Changes

  • Incorporated vapier@ mods to make version command not fail if CHECKSUM file missing.
  • Refactored gsutil such that most functionality exists in boto.
  • Updated gsutil help dev instructions for how to check out source.

Release 3.18 (release-date: 2012-09-19)

Bug Fixes

  • Fixed resumable upload boundary condition when handling POST request when server already has complete file, which resulted in an infinite loop that consumed 100% of the CPU.
  • Fixed one more place that outputted progress info when gsutil cp -q specified (during streaming uploads).

Other Changes

  • Updated help text for “gsutil help setmeta” and “gsutil help metadata”, to clarify and deepen parts of the documentation.

Release 3.17 (release-date: 2012-08-17)

Bug Fixes

  • Fixed race condition when multiple threads attempt to get an OAuth2 refresh token concurrently.

Other Changes

  • Implemented simplified syntax for setmeta command. The old syntax still works but is now deprecated.
  • Added help to gsutil cp -z option, to describe how to change where temp files are written.

Release 3.16 (release-date: 2012-08-13)

Bug Fixes

  • Added info to built-in help for setmeta command, to explain the syntax needed when running from Windows.

Release 3.15 (release-date: 2012-08-12)

New Features

  • Implemented gsutil setmeta command.
  • Made gsutil understand bucket subdir conventions used by various tools (like GCS Manager and CloudBerry) so if you cp or mv to a subdir you created with one of those tools it will work as expected.
  • Added support for Windows drive letter-prefaced paths when using Storage URIs.

Bug Fixes

  • Fixed performance bug when downloading a large object with Content- Encoding:gzip, where decompression attempted to load the entire object in memory. Also added “Uncompressing” log output if file is larger than 50M, to make it clear the download hasn't stalled.
  • Fixed naming bug when performing gsutil mv from a bucket subdir to and existing bucket subdir.
  • Fixed bug that caused cross-provider copies into Google Cloud Storage to fail.
  • Made change needed to make resumable transfer progress messages not print when running gsutil cp -q.
  • Fixed copy/paste error in config file documentation for https_validate_certificates option.
  • Various typo fixes.

Other Changes

  • Changed gsutil to unset http_proxy environment variable if it's set, because it confuses boto. (Proxies should instead be configured via the boto config file.)

Release 3.14 (release-date: 2012-07-28)

New Features

  • Added cp -q option, to support quiet operation from cron jobs.
  • Made config command restore backed up file if there was a failure or user hits ^C.

Bug Fixes

  • Fixed bug where gsutil cp -R from a source directory didn't generate correct destination path.
  • Fixed file handle leak in gsutil cp -z
  • Fixed bug that caused cp -a option not to work when copying in the cloud.
  • Fixed bug that caused ‘/-’ to be appended to object name for streaming uploads.
  • Revert incorrect line I changed in previous CL, that attempted to get fp from src_key object. The real fix that's needed is described in https://github.com/GoogleCloudPlatform/gsutil/issues/72.

Other Changes

  • Changed logging to print “Copying...” and Content-Type on same line; refactored content type and log handling.

Release 3.13 (release-date: 2012-07-19)

Bug Fixes

  • Included the fix to make ‘gsutil config’ honor BOTO_CONFIG environment variable (which was intended to be included in Release 3.12)

Release 3.11 (release-date: 2012-06-28)

New Features

  • Added support for configuring website buckets.

Bug Fixes

  • Fixed bug that caused simultaneous resumable downloads of the same source object to use the same tracker file.
  • Changed language code spec pointer from Wikipedia to loc.gov (for Content-Language header).

Release 3.10 (release-date: 2012-06-19)

New Features

  • Added support for setting and listing Content-Language header.

Bug Fixes

  • Fixed bug that caused getacl/setacl commands to get a character encoding exception when ACL content contained content not representable in ISO-8859-1 character set.
  • Fixed gsutil update not to fail under Windows exclusive file locking.
  • Fixed gsutil ls -L to continue past 403 errors.
  • Updated gsutil tests and also help dev with instructions on how to run boto tests, based on recent test refactoring done to in boto library.
  • Cleaned up parts of cp help text.

Release 3.9 (release-date: 2012-05-24)

Bug Fixes

  • Fixed bug that caused extra “file:/” to be included in pathnames with doing gsutil cp -R on Windows.

Release 3.8 (release-date: 2012-05-20)

Bug Fixes

  • Fixed problem with non-ASCII filename characters not setting encoding before attempting to hash for generating resumable transfer filename.

Release 3.7 (release-date: 2012-05-11)

Bug Fixes

  • Fixed handling of HTTPS tunneling through a proxy.

Release 3.6 (release-date: 2012-05-09)

Bug Fixes

  • Fixed bug that caused wildcards spanning directories not to work.
  • Fixed bug that gsutil cp -z not to find available tmp space correctly under Windows.

Release 3.5 (release-date: 2012-04-30)

Performance Improvement

  • Change by Evan Worley to calculate MD5s incrementally during uploads and downloads. This reduces overall transfer time substantially for large objects.

Bug Fixes

  • Fixed bug where uploading and moving multiple files to a bucket subdirectory didn't work as intended. (https://github.com/GoogleCloudPlatform/gsutil/issues/92).
  • Fixed bug where gsutil cp -r sourcedir didn't copy to specified subdir if there is only one file in sourcedir.
  • Fixed bug where tracker file included a timestamp that caused it not to be recognized across sessions.
  • Fixed bug where gs://bucket/*/dir wildcard matches too many objects.
  • Fixed documentation errors in help associated with ACLs and projects.
  • Changed GCS ACL parsing to be case-insensitive.
  • Changed ls to print error and exit with non-0 status when wildcard matches nothing, to be more consistent with UNIX shell behavior.

Release 3.4 (release-date: 2012-04-06)

Bug Fixes

  • Fixed problem where resumable uploads/downloads of objects with very long names would generate tracking files with names that exceeded local file system limits, making it impossible to complete resumable transfers for those objects. Solution was to build the tracking file name from a fixed prefix, SHA1 hash of the long filename, epoch timestamp and last 16 chars of the long filename, which is guarantee to be a predictable and reasonable length.
  • Fixed minor bug in output from ‘gsutil help dev’ which advised executing an inconsequential test script (test_util.py).

Release 3.3 (release-date: 2012-04-03)

Bug Fixes

  • Fixed problem where gsutil ver and debug flags crashed when used with newly generated boto config files.
  • Fixed gsutil bug in windows path handling, and make checksumming work across platforms.
  • Fixed enablelogging to translate -b URI param to plain bucket name in REST API request.

Release 3.2 (release-date: 2012-03-30)

Bug Fixes

  • Fixed problem where gsutil didn't convert between OS-specific directory separators when copying individually-named files (issue 87).
  • Fixed problem where gsutil ls -R didn't work right if there was a key with a leading path (like /foo/bar/baz)

Release 3.1 (release-date: 2012-03-20)

Bug Fixes

  • Removed erroneous setting of Content-Encoding when a gzip file is uploaded (vs running gsutil cp -z, when Content-Encoding should be set). This error caused users to get gsutil.tar.gz file uncompressed by the user agent (like wget) while downloading, making the file appear to be of the wrong size/content.
  • Fixed handling of gsutil help for Windows (previous code depended on termios and fcntl libs, which are Linux/MacOS-specific).

Release 3.0 (release-date: 2012-03-20)

Important Notes

  • Backwards-incompatible wildcard change: The ‘*’ wildcard now only matches objects within a bucket directory. If you have scripts that depend on being able to match spanning multiple directories you need to use ‘**’ instead. For example, the command:

      gsutil cp gs://bucket/*.txt
    

    will now only match .txt files in the top-level directory.

      gsutil cp gs://bucket/**.txt
    

    will match across all directories.

  • gsutil ls now lists one directory at a time. If you want to list all objects in a bucket, you can use:

      gsutil ls gs://bucket/**
    

    or:

      gsutil ls -R gs://bucket
    

New Features

  • Built-in help for all commands and many additional topics. Try “gsutil help” for a list of available commands and topics.

  • A new hierarchical file tree abstraction layer, which makes the flat bucket name space look like a hierarchical file tree. This makes several things possible:

    • copying data to/from bucket sub-directories (see “gsutil help cp”).
    • distributing large uploads/downloads across many machines (see “gsutil help cp”)
    • renaming bucket sub-directories (see “gsutil help mv”).
    • listing individual bucket sub-directories and for listing directories recursively (see “gsutil help ls”).
    • setting ACLs for objects in a sub-directory (see “gsutil help setacl”).
  • Support for per-directory (*) and recursive (**) wildcards. Essentially, ** works the way * did in previous gsutil releases, and * now behaves consistently with how it works in command interpreters (like bash). The ability to specify directory-only wildcards also enables a number of use cases, such as distributing large uploads/downloads by wildcarded name. See “gsutil help wildcards” for details.

  • Support for Cross-Origin Resource Sharing (CORS) configuration. See “gsutil help cors” for details.

  • Support for multi-threading and recursive operation for setacl command (see “gsutil help setacl”).

  • Ability to use the UNIX ‘file’ command to do content type recognition as an alternative to filename extensions.

  • Introduction of new end-to-end test suite.

  • The gsutil version command now computes a checksum of the code, to detect corruption and local modification when assisting with technical support.

  • The gsutil update command is no longer beta/experimental, and now also supports updating from named URIs (for early/test releases).

  • Changed gsutil ls -L to also print Content-Disposition header.

Bug Fixes

  • The gsutil cp -t option previously didn't work as documented, and instead Content-Type was always detected based on filename extension. Content-Type detection is now the default, the -t option is deprecated (to be removed in the future), and specifying a -h Content-Type header now correctly overrides the filename extension based handling. For details see “gsutil help metadata”.
  • Fixed bug that caused multi-threaded mv command not to percolate failures during the cp phase to the rm phase, which could under some circumstances cause data that was not copied to be deleted.
  • Fixed bug that caused gsutil to use GET for ls -L requests. It now uses HEAD for ls -L requests, which is more efficient and faster.
  • Fixed bug that caused gsutil not to preserve metadata during copy-in-the-cloud.
  • Fixed bug that prevented setacl command from allowing DisplayName's in ACLs.
  • Fixed bug that caused gsutil/boto to suppress consecutive slashes in path names.
  • Fixed spec-non-compliant URI construction for resumable uploads.
  • Fixed bug that caused rm -f not to work.
  • Fixed UnicodeEncodeError that happened when redirecting gsutil ls output to a file with non-ASCII object names.

Other Changes

  • UserAgent sent in HTTP requests now includes gsutil version number and OS name.
  • Starting with this release users are able to get individual named releases from version-named objects: gs://pub/gsutil_.tar.gz and gs://pub/gsutil_.zip. The version-less counterparts (gs://pub/gsutil.tar.gz and gs://pub/gsutil.zip) will contain the latest release. Also, the gs://pub bucket is now publicly readable (so, anyone can list its contents).

Release 2.0 (release-date: 2012-01-13)

New Features

  • Support for for two new installation modes: enterprise and RPM. Customers can now install gsutil one of three ways:

    • Individual user mode (previously the only available mode): unpacking from a gzipped tarball (gs://pub/gsutil.tar.gz) or zip file (gs://pub/gsutil.zip) and running the gsutil command in place in the unpacked gsutil directory.
    • Enterprise mode (new): unpacking as above, and then running the setup.py script in the unpacked gsutil directory. This allows a systems administrator to install gsutil in a central location, using the Python distutils facility. This mode is supported only on Linux and MacOS.
    • RPM mode (new). A RedHat RPM can be built from the gsutil.spec.in file in the unpacked gsutil directory, allowing it to be installed as part of a RedHat build.
  • Note: v2.0 is the first numbered gsutil release. Previous releases were given timestamps for versions. Numbered releases enable downstream package builds (like RPMs) to define dependencies more easily. This is also the first version where we began including release notes.