| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] */ |
| |
| #ifndef OPENSSL_HEADER_CIPHER_H |
| #define OPENSSL_HEADER_CIPHER_H |
| |
| #include <openssl/base.h> |
| |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| |
| // Ciphers. |
| |
| |
| // Cipher primitives. |
| // |
| // The following functions return |EVP_CIPHER| objects that implement the named |
| // cipher algorithm. |
| |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_rc4(void); |
| |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_des_cbc(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ecb(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede_cbc(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3_cbc(void); |
| |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ecb(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cbc(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ctr(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ofb(void); |
| |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ecb(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cbc(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ctr(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ofb(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_xts(void); |
| |
| // EVP_enc_null returns a 'cipher' that passes plaintext through as |
| // ciphertext. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_enc_null(void); |
| |
| // EVP_rc2_cbc returns a cipher that implements 128-bit RC2 in CBC mode. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_rc2_cbc(void); |
| |
| // EVP_rc2_40_cbc returns a cipher that implements 40-bit RC2 in CBC mode. This |
| // is obviously very, very weak and is included only in order to read PKCS#12 |
| // files, which often encrypt the certificate chain using this cipher. It is |
| // deliberately not exported. |
| const EVP_CIPHER *EVP_rc2_40_cbc(void); |
| |
| // EVP_get_cipherbynid returns the cipher corresponding to the given NID, or |
| // NULL if no such cipher is known. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_get_cipherbynid(int nid); |
| |
| |
| // Cipher context allocation. |
| // |
| // An |EVP_CIPHER_CTX| represents the state of an encryption or decryption in |
| // progress. |
| |
| // EVP_CIPHER_CTX_init initialises an, already allocated, |EVP_CIPHER_CTX|. |
| OPENSSL_EXPORT void EVP_CIPHER_CTX_init(EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_new allocates a fresh |EVP_CIPHER_CTX|, calls |
| // |EVP_CIPHER_CTX_init| and returns it, or NULL on allocation failure. |
| OPENSSL_EXPORT EVP_CIPHER_CTX *EVP_CIPHER_CTX_new(void); |
| |
| // EVP_CIPHER_CTX_cleanup frees any memory referenced by |ctx|. It returns |
| // one. |
| OPENSSL_EXPORT int EVP_CIPHER_CTX_cleanup(EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_free calls |EVP_CIPHER_CTX_cleanup| on |ctx| and then frees |
| // |ctx| itself. |
| OPENSSL_EXPORT void EVP_CIPHER_CTX_free(EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_copy sets |out| to be a duplicate of the current state of |
| // |in|. The |out| argument must have been previously initialised. |
| OPENSSL_EXPORT int EVP_CIPHER_CTX_copy(EVP_CIPHER_CTX *out, |
| const EVP_CIPHER_CTX *in); |
| |
| // EVP_CIPHER_CTX_reset calls |EVP_CIPHER_CTX_cleanup| followed by |
| // |EVP_CIPHER_CTX_init| and returns one. |
| OPENSSL_EXPORT int EVP_CIPHER_CTX_reset(EVP_CIPHER_CTX *ctx); |
| |
| |
| // Cipher context configuration. |
| |
| // EVP_CipherInit_ex configures |ctx| for a fresh encryption (or decryption, if |
| // |enc| is zero) operation using |cipher|. If |ctx| has been previously |
| // configured with a cipher then |cipher|, |key| and |iv| may be |NULL| and |
| // |enc| may be -1 to reuse the previous values. The operation will use |key| |
| // as the key and |iv| as the IV (if any). These should have the correct |
| // lengths given by |EVP_CIPHER_key_length| and |EVP_CIPHER_iv_length|. It |
| // returns one on success and zero on error. |
| OPENSSL_EXPORT int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx, |
| const EVP_CIPHER *cipher, ENGINE *engine, |
| const uint8_t *key, const uint8_t *iv, |
| int enc); |
| |
| // EVP_EncryptInit_ex calls |EVP_CipherInit_ex| with |enc| equal to one. |
| OPENSSL_EXPORT int EVP_EncryptInit_ex(EVP_CIPHER_CTX *ctx, |
| const EVP_CIPHER *cipher, ENGINE *impl, |
| const uint8_t *key, const uint8_t *iv); |
| |
| // EVP_DecryptInit_ex calls |EVP_CipherInit_ex| with |enc| equal to zero. |
| OPENSSL_EXPORT int EVP_DecryptInit_ex(EVP_CIPHER_CTX *ctx, |
| const EVP_CIPHER *cipher, ENGINE *impl, |
| const uint8_t *key, const uint8_t *iv); |
| |
| |
| // Cipher operations. |
| |
| // EVP_EncryptUpdate encrypts |in_len| bytes from |in| to |out|. The number |
| // of output bytes may be up to |in_len| plus the block length minus one and |
| // |out| must have sufficient space. The number of bytes actually output is |
| // written to |*out_len|. It returns one on success and zero otherwise. |
| OPENSSL_EXPORT int EVP_EncryptUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out, |
| int *out_len, const uint8_t *in, |
| int in_len); |
| |
| // EVP_EncryptFinal_ex writes at most a block of ciphertext to |out| and sets |
| // |*out_len| to the number of bytes written. If padding is enabled (the |
| // default) then standard padding is applied to create the final block. If |
| // padding is disabled (with |EVP_CIPHER_CTX_set_padding|) then any partial |
| // block remaining will cause an error. The function returns one on success and |
| // zero otherwise. |
| OPENSSL_EXPORT int EVP_EncryptFinal_ex(EVP_CIPHER_CTX *ctx, uint8_t *out, |
| int *out_len); |
| |
| // EVP_DecryptUpdate decrypts |in_len| bytes from |in| to |out|. The number of |
| // output bytes may be up to |in_len| plus the block length minus one and |out| |
| // must have sufficient space. The number of bytes actually output is written |
| // to |*out_len|. It returns one on success and zero otherwise. |
| OPENSSL_EXPORT int EVP_DecryptUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out, |
| int *out_len, const uint8_t *in, |
| int in_len); |
| |
| // EVP_DecryptFinal_ex writes at most a block of ciphertext to |out| and sets |
| // |*out_len| to the number of bytes written. If padding is enabled (the |
| // default) then padding is removed from the final block. |
| // |
| // WARNING: it is unsafe to call this function with unauthenticated |
| // ciphertext if padding is enabled. |
| OPENSSL_EXPORT int EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *out, |
| int *out_len); |
| |
| // EVP_Cipher performs a one-shot encryption/decryption operation. No partial |
| // blocks are maintained between calls. However, any internal cipher state is |
| // still updated. For CBC-mode ciphers, the IV is updated to the final |
| // ciphertext block. For stream ciphers, the stream is advanced past the bytes |
| // used. It returns one on success and zero otherwise, unless |EVP_CIPHER_flags| |
| // has |EVP_CIPH_FLAG_CUSTOM_CIPHER| set. Then it returns the number of bytes |
| // written or -1 on error. |
| // |
| // WARNING: this differs from the usual return value convention when using |
| // |EVP_CIPH_FLAG_CUSTOM_CIPHER|. |
| // |
| // TODO(davidben): The normal ciphers currently never fail, even if, e.g., |
| // |in_len| is not a multiple of the block size for CBC-mode decryption. The |
| // input just gets rounded up while the output gets truncated. This should |
| // either be officially documented or fail. |
| OPENSSL_EXPORT int EVP_Cipher(EVP_CIPHER_CTX *ctx, uint8_t *out, |
| const uint8_t *in, size_t in_len); |
| |
| // EVP_CipherUpdate calls either |EVP_EncryptUpdate| or |EVP_DecryptUpdate| |
| // depending on how |ctx| has been setup. |
| OPENSSL_EXPORT int EVP_CipherUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out, |
| int *out_len, const uint8_t *in, |
| int in_len); |
| |
| // EVP_CipherFinal_ex calls either |EVP_EncryptFinal_ex| or |
| // |EVP_DecryptFinal_ex| depending on how |ctx| has been setup. |
| OPENSSL_EXPORT int EVP_CipherFinal_ex(EVP_CIPHER_CTX *ctx, uint8_t *out, |
| int *out_len); |
| |
| |
| // Cipher context accessors. |
| |
| // EVP_CIPHER_CTX_cipher returns the |EVP_CIPHER| underlying |ctx|, or NULL if |
| // none has been set. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_CIPHER_CTX_cipher( |
| const EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_nid returns a NID identifying the |EVP_CIPHER| underlying |
| // |ctx| (e.g. |NID_aes_128_gcm|). It will crash if no cipher has been |
| // configured. |
| OPENSSL_EXPORT int EVP_CIPHER_CTX_nid(const EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_encrypting returns one if |ctx| is configured for encryption |
| // and zero otherwise. |
| OPENSSL_EXPORT int EVP_CIPHER_CTX_encrypting(const EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_block_size returns the block size, in bytes, of the cipher |
| // underlying |ctx|, or one if the cipher is a stream cipher. It will crash if |
| // no cipher has been configured. |
| OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_block_size(const EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_key_length returns the key size, in bytes, of the cipher |
| // underlying |ctx| or zero if no cipher has been configured. |
| OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_key_length(const EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_iv_length returns the IV size, in bytes, of the cipher |
| // underlying |ctx|. It will crash if no cipher has been configured. |
| OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_iv_length(const EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_get_app_data returns the opaque, application data pointer for |
| // |ctx|, or NULL if none has been set. |
| OPENSSL_EXPORT void *EVP_CIPHER_CTX_get_app_data(const EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_set_app_data sets the opaque, application data pointer for |
| // |ctx| to |data|. |
| OPENSSL_EXPORT void EVP_CIPHER_CTX_set_app_data(EVP_CIPHER_CTX *ctx, |
| void *data); |
| |
| // EVP_CIPHER_CTX_flags returns a value which is the OR of zero or more |
| // |EVP_CIPH_*| flags. It will crash if no cipher has been configured. |
| OPENSSL_EXPORT uint32_t EVP_CIPHER_CTX_flags(const EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_mode returns one of the |EVP_CIPH_*| cipher mode values |
| // enumerated below. It will crash if no cipher has been configured. |
| OPENSSL_EXPORT uint32_t EVP_CIPHER_CTX_mode(const EVP_CIPHER_CTX *ctx); |
| |
| // EVP_CIPHER_CTX_ctrl is an |ioctl| like function. The |command| argument |
| // should be one of the |EVP_CTRL_*| values. The |arg| and |ptr| arguments are |
| // specific to the command in question. |
| OPENSSL_EXPORT int EVP_CIPHER_CTX_ctrl(EVP_CIPHER_CTX *ctx, int command, |
| int arg, void *ptr); |
| |
| // EVP_CIPHER_CTX_set_padding sets whether padding is enabled for |ctx| and |
| // returns one. Pass a non-zero |pad| to enable padding (the default) or zero |
| // to disable. |
| OPENSSL_EXPORT int EVP_CIPHER_CTX_set_padding(EVP_CIPHER_CTX *ctx, int pad); |
| |
| // EVP_CIPHER_CTX_set_key_length sets the key length for |ctx|. This is only |
| // valid for ciphers that can take a variable length key. It returns one on |
| // success and zero on error. |
| OPENSSL_EXPORT int EVP_CIPHER_CTX_set_key_length(EVP_CIPHER_CTX *ctx, |
| unsigned key_len); |
| |
| |
| // Cipher accessors. |
| |
| // EVP_CIPHER_nid returns a NID identifying |cipher|. (For example, |
| // |NID_aes_128_gcm|.) |
| OPENSSL_EXPORT int EVP_CIPHER_nid(const EVP_CIPHER *cipher); |
| |
| // EVP_CIPHER_block_size returns the block size, in bytes, for |cipher|, or one |
| // if |cipher| is a stream cipher. |
| OPENSSL_EXPORT unsigned EVP_CIPHER_block_size(const EVP_CIPHER *cipher); |
| |
| // EVP_CIPHER_key_length returns the key size, in bytes, for |cipher|. If |
| // |cipher| can take a variable key length then this function returns the |
| // default key length and |EVP_CIPHER_flags| will return a value with |
| // |EVP_CIPH_VARIABLE_LENGTH| set. |
| OPENSSL_EXPORT unsigned EVP_CIPHER_key_length(const EVP_CIPHER *cipher); |
| |
| // EVP_CIPHER_iv_length returns the IV size, in bytes, of |cipher|, or zero if |
| // |cipher| doesn't take an IV. |
| OPENSSL_EXPORT unsigned EVP_CIPHER_iv_length(const EVP_CIPHER *cipher); |
| |
| // EVP_CIPHER_flags returns a value which is the OR of zero or more |
| // |EVP_CIPH_*| flags. |
| OPENSSL_EXPORT uint32_t EVP_CIPHER_flags(const EVP_CIPHER *cipher); |
| |
| // EVP_CIPHER_mode returns one of the cipher mode values enumerated below. |
| OPENSSL_EXPORT uint32_t EVP_CIPHER_mode(const EVP_CIPHER *cipher); |
| |
| |
| // Key derivation. |
| |
| // EVP_BytesToKey generates a key and IV for the cipher |type| by iterating |
| // |md| |count| times using |data| and |salt|. On entry, the |key| and |iv| |
| // buffers must have enough space to hold a key and IV for |type|. It returns |
| // the length of the key on success or zero on error. |
| OPENSSL_EXPORT int EVP_BytesToKey(const EVP_CIPHER *type, const EVP_MD *md, |
| const uint8_t *salt, const uint8_t *data, |
| size_t data_len, unsigned count, uint8_t *key, |
| uint8_t *iv); |
| |
| |
| // Cipher modes (for |EVP_CIPHER_mode|). |
| |
| #define EVP_CIPH_STREAM_CIPHER 0x0 |
| #define EVP_CIPH_ECB_MODE 0x1 |
| #define EVP_CIPH_CBC_MODE 0x2 |
| #define EVP_CIPH_CFB_MODE 0x3 |
| #define EVP_CIPH_OFB_MODE 0x4 |
| #define EVP_CIPH_CTR_MODE 0x5 |
| #define EVP_CIPH_GCM_MODE 0x6 |
| #define EVP_CIPH_XTS_MODE 0x7 |
| |
| |
| // Cipher flags (for |EVP_CIPHER_flags|). |
| |
| // EVP_CIPH_VARIABLE_LENGTH indicates that the cipher takes a variable length |
| // key. |
| #define EVP_CIPH_VARIABLE_LENGTH 0x40 |
| |
| // EVP_CIPH_ALWAYS_CALL_INIT indicates that the |init| function for the cipher |
| // should always be called when initialising a new operation, even if the key |
| // is NULL to indicate that the same key is being used. |
| #define EVP_CIPH_ALWAYS_CALL_INIT 0x80 |
| |
| // EVP_CIPH_CUSTOM_IV indicates that the cipher manages the IV itself rather |
| // than keeping it in the |iv| member of |EVP_CIPHER_CTX|. |
| #define EVP_CIPH_CUSTOM_IV 0x100 |
| |
| // EVP_CIPH_CTRL_INIT indicates that EVP_CTRL_INIT should be used when |
| // initialising an |EVP_CIPHER_CTX|. |
| #define EVP_CIPH_CTRL_INIT 0x200 |
| |
| // EVP_CIPH_FLAG_CUSTOM_CIPHER indicates that the cipher manages blocking |
| // itself. This causes EVP_(En|De)crypt_ex to be simple wrapper functions. |
| #define EVP_CIPH_FLAG_CUSTOM_CIPHER 0x400 |
| |
| // EVP_CIPH_FLAG_AEAD_CIPHER specifies that the cipher is an AEAD. This is an |
| // older version of the proper AEAD interface. See aead.h for the current |
| // one. |
| #define EVP_CIPH_FLAG_AEAD_CIPHER 0x800 |
| |
| // EVP_CIPH_CUSTOM_COPY indicates that the |ctrl| callback should be called |
| // with |EVP_CTRL_COPY| at the end of normal |EVP_CIPHER_CTX_copy| |
| // processing. |
| #define EVP_CIPH_CUSTOM_COPY 0x1000 |
| |
| // EVP_CIPH_FLAG_NON_FIPS_ALLOW is meaningless. In OpenSSL it permits non-FIPS |
| // algorithms in FIPS mode. But BoringSSL FIPS mode doesn't prohibit algorithms |
| // (it's up the the caller to use the FIPS module in a fashion compliant with |
| // their needs). Thus this exists only to allow code to compile. |
| #define EVP_CIPH_FLAG_NON_FIPS_ALLOW 0 |
| |
| |
| // Deprecated functions |
| |
| // EVP_CipherInit acts like EVP_CipherInit_ex except that |EVP_CIPHER_CTX_init| |
| // is called on |cipher| first, if |cipher| is not NULL. |
| OPENSSL_EXPORT int EVP_CipherInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, |
| const uint8_t *key, const uint8_t *iv, |
| int enc); |
| |
| // EVP_EncryptInit calls |EVP_CipherInit| with |enc| equal to one. |
| OPENSSL_EXPORT int EVP_EncryptInit(EVP_CIPHER_CTX *ctx, |
| const EVP_CIPHER *cipher, const uint8_t *key, |
| const uint8_t *iv); |
| |
| // EVP_DecryptInit calls |EVP_CipherInit| with |enc| equal to zero. |
| OPENSSL_EXPORT int EVP_DecryptInit(EVP_CIPHER_CTX *ctx, |
| const EVP_CIPHER *cipher, const uint8_t *key, |
| const uint8_t *iv); |
| |
| // EVP_add_cipher_alias does nothing and returns one. |
| OPENSSL_EXPORT int EVP_add_cipher_alias(const char *a, const char *b); |
| |
| // EVP_get_cipherbyname returns an |EVP_CIPHER| given a human readable name in |
| // |name|, or NULL if the name is unknown. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_get_cipherbyname(const char *name); |
| |
| // These AEADs are deprecated AES-GCM implementations that set |
| // |EVP_CIPH_FLAG_CUSTOM_CIPHER|. Use |EVP_aead_aes_128_gcm| and |
| // |EVP_aead_aes_256_gcm| instead. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_gcm(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_gcm(void); |
| |
| // These are deprecated, 192-bit version of AES. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_ecb(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cbc(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_ctr(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_gcm(void); |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_ofb(void); |
| |
| // EVP_des_ede3_ecb is an alias for |EVP_des_ede3|. Use the former instead. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3_ecb(void); |
| |
| // EVP_aes_128_cfb128 is only available in decrepit. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cfb128(void); |
| |
| // EVP_aes_128_cfb is an alias for |EVP_aes_128_cfb128| and is only available in |
| // decrepit. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cfb(void); |
| |
| // EVP_aes_192_cfb128 is only available in decrepit. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cfb128(void); |
| |
| // EVP_aes_192_cfb is an alias for |EVP_aes_192_cfb128| and is only available in |
| // decrepit. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cfb(void); |
| |
| // EVP_aes_256_cfb128 is only available in decrepit. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cfb128(void); |
| |
| // EVP_aes_256_cfb is an alias for |EVP_aes_256_cfb128| and is only available in |
| // decrepit. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cfb(void); |
| |
| // EVP_bf_ecb is Blowfish in ECB mode and is only available in decrepit. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_bf_ecb(void); |
| |
| // EVP_bf_cbc is Blowfish in CBC mode and is only available in decrepit. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_bf_cbc(void); |
| |
| // EVP_bf_cfb is Blowfish in 64-bit CFB mode and is only available in decrepit. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_bf_cfb(void); |
| |
| // EVP_cast5_ecb is CAST5 in ECB mode and is only available in decrepit. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_cast5_ecb(void); |
| |
| // EVP_cast5_cbc is CAST5 in CBC mode and is only available in decrepit. |
| OPENSSL_EXPORT const EVP_CIPHER *EVP_cast5_cbc(void); |
| |
| // The following flags do nothing and are included only to make it easier to |
| // compile code with BoringSSL. |
| #define EVP_CIPH_CCM_MODE (-1) |
| #define EVP_CIPH_OCB_MODE (-2) |
| #define EVP_CIPH_WRAP_MODE (-3) |
| #define EVP_CIPHER_CTX_FLAG_WRAP_ALLOW 0 |
| |
| // EVP_CIPHER_CTX_set_flags does nothing. |
| OPENSSL_EXPORT void EVP_CIPHER_CTX_set_flags(const EVP_CIPHER_CTX *ctx, |
| uint32_t flags); |
| |
| |
| // Private functions. |
| |
| // EVP_CIPH_NO_PADDING disables padding in block ciphers. |
| #define EVP_CIPH_NO_PADDING 0x800 |
| |
| // The following are |EVP_CIPHER_CTX_ctrl| commands. |
| #define EVP_CTRL_INIT 0x0 |
| #define EVP_CTRL_SET_KEY_LENGTH 0x1 |
| #define EVP_CTRL_GET_RC2_KEY_BITS 0x2 |
| #define EVP_CTRL_SET_RC2_KEY_BITS 0x3 |
| #define EVP_CTRL_GET_RC5_ROUNDS 0x4 |
| #define EVP_CTRL_SET_RC5_ROUNDS 0x5 |
| #define EVP_CTRL_RAND_KEY 0x6 |
| #define EVP_CTRL_PBE_PRF_NID 0x7 |
| #define EVP_CTRL_COPY 0x8 |
| #define EVP_CTRL_AEAD_SET_IVLEN 0x9 |
| #define EVP_CTRL_AEAD_GET_TAG 0x10 |
| #define EVP_CTRL_AEAD_SET_TAG 0x11 |
| #define EVP_CTRL_AEAD_SET_IV_FIXED 0x12 |
| #define EVP_CTRL_GCM_IV_GEN 0x13 |
| #define EVP_CTRL_AEAD_SET_MAC_KEY 0x17 |
| // EVP_CTRL_GCM_SET_IV_INV sets the GCM invocation field, decrypt only |
| #define EVP_CTRL_GCM_SET_IV_INV 0x18 |
| |
| // The following constants are unused. |
| #define EVP_GCM_TLS_FIXED_IV_LEN 4 |
| #define EVP_GCM_TLS_EXPLICIT_IV_LEN 8 |
| #define EVP_GCM_TLS_TAG_LEN 16 |
| |
| // The following are legacy aliases for AEAD |EVP_CIPHER_CTX_ctrl| values. |
| #define EVP_CTRL_GCM_SET_IVLEN EVP_CTRL_AEAD_SET_IVLEN |
| #define EVP_CTRL_GCM_GET_TAG EVP_CTRL_AEAD_GET_TAG |
| #define EVP_CTRL_GCM_SET_TAG EVP_CTRL_AEAD_SET_TAG |
| #define EVP_CTRL_GCM_SET_IV_FIXED EVP_CTRL_AEAD_SET_IV_FIXED |
| |
| #define EVP_MAX_KEY_LENGTH 64 |
| #define EVP_MAX_IV_LENGTH 16 |
| #define EVP_MAX_BLOCK_LENGTH 32 |
| |
| struct evp_cipher_ctx_st { |
| // cipher contains the underlying cipher for this context. |
| const EVP_CIPHER *cipher; |
| |
| // app_data is a pointer to opaque, user data. |
| void *app_data; // application stuff |
| |
| // cipher_data points to the |cipher| specific state. |
| void *cipher_data; |
| |
| // key_len contains the length of the key, which may differ from |
| // |cipher->key_len| if the cipher can take a variable key length. |
| unsigned key_len; |
| |
| // encrypt is one if encrypting and zero if decrypting. |
| int encrypt; |
| |
| // flags contains the OR of zero or more |EVP_CIPH_*| flags, above. |
| uint32_t flags; |
| |
| // oiv contains the original IV value. |
| uint8_t oiv[EVP_MAX_IV_LENGTH]; |
| |
| // iv contains the current IV value, which may have been updated. |
| uint8_t iv[EVP_MAX_IV_LENGTH]; |
| |
| // buf contains a partial block which is used by, for example, CTR mode to |
| // store unused keystream bytes. |
| uint8_t buf[EVP_MAX_BLOCK_LENGTH]; |
| |
| // buf_len contains the number of bytes of a partial block contained in |
| // |buf|. |
| int buf_len; |
| |
| // num contains the number of bytes of |iv| which are valid for modes that |
| // manage partial blocks themselves. |
| unsigned num; |
| |
| // final_used is non-zero if the |final| buffer contains plaintext. |
| int final_used; |
| |
| // block_mask contains |cipher->block_size| minus one. (The block size |
| // assumed to be a power of two.) |
| int block_mask; |
| |
| uint8_t final[EVP_MAX_BLOCK_LENGTH]; // possible final block |
| } /* EVP_CIPHER_CTX */; |
| |
| typedef struct evp_cipher_info_st { |
| const EVP_CIPHER *cipher; |
| unsigned char iv[EVP_MAX_IV_LENGTH]; |
| } EVP_CIPHER_INFO; |
| |
| struct evp_cipher_st { |
| // type contains a NID identifing the cipher. (e.g. NID_aes_128_gcm.) |
| int nid; |
| |
| // block_size contains the block size, in bytes, of the cipher, or 1 for a |
| // stream cipher. |
| unsigned block_size; |
| |
| // key_len contains the key size, in bytes, for the cipher. If the cipher |
| // takes a variable key size then this contains the default size. |
| unsigned key_len; |
| |
| // iv_len contains the IV size, in bytes, or zero if inapplicable. |
| unsigned iv_len; |
| |
| // ctx_size contains the size, in bytes, of the per-key context for this |
| // cipher. |
| unsigned ctx_size; |
| |
| // flags contains the OR of a number of flags. See |EVP_CIPH_*|. |
| uint32_t flags; |
| |
| // app_data is a pointer to opaque, user data. |
| void *app_data; |
| |
| int (*init)(EVP_CIPHER_CTX *ctx, const uint8_t *key, const uint8_t *iv, |
| int enc); |
| |
| int (*cipher)(EVP_CIPHER_CTX *ctx, uint8_t *out, const uint8_t *in, |
| size_t inl); |
| |
| // cleanup, if non-NULL, releases memory associated with the context. It is |
| // called if |EVP_CTRL_INIT| succeeds. Note that |init| may not have been |
| // called at this point. |
| void (*cleanup)(EVP_CIPHER_CTX *); |
| |
| int (*ctrl)(EVP_CIPHER_CTX *, int type, int arg, void *ptr); |
| }; |
| |
| |
| #if defined(__cplusplus) |
| } // extern C |
| |
| #if !defined(BORINGSSL_NO_CXX) |
| extern "C++" { |
| |
| BSSL_NAMESPACE_BEGIN |
| |
| BORINGSSL_MAKE_DELETER(EVP_CIPHER_CTX, EVP_CIPHER_CTX_free) |
| |
| using ScopedEVP_CIPHER_CTX = |
| internal::StackAllocated<EVP_CIPHER_CTX, int, EVP_CIPHER_CTX_init, |
| EVP_CIPHER_CTX_cleanup>; |
| |
| BSSL_NAMESPACE_END |
| |
| } // extern C++ |
| #endif |
| |
| #endif |
| |
| #define CIPHER_R_AES_KEY_SETUP_FAILED 100 |
| #define CIPHER_R_BAD_DECRYPT 101 |
| #define CIPHER_R_BAD_KEY_LENGTH 102 |
| #define CIPHER_R_BUFFER_TOO_SMALL 103 |
| #define CIPHER_R_CTRL_NOT_IMPLEMENTED 104 |
| #define CIPHER_R_CTRL_OPERATION_NOT_IMPLEMENTED 105 |
| #define CIPHER_R_DATA_NOT_MULTIPLE_OF_BLOCK_LENGTH 106 |
| #define CIPHER_R_INITIALIZATION_ERROR 107 |
| #define CIPHER_R_INPUT_NOT_INITIALIZED 108 |
| #define CIPHER_R_INVALID_AD_SIZE 109 |
| #define CIPHER_R_INVALID_KEY_LENGTH 110 |
| #define CIPHER_R_INVALID_NONCE_SIZE 111 |
| #define CIPHER_R_INVALID_OPERATION 112 |
| #define CIPHER_R_IV_TOO_LARGE 113 |
| #define CIPHER_R_NO_CIPHER_SET 114 |
| #define CIPHER_R_OUTPUT_ALIASES_INPUT 115 |
| #define CIPHER_R_TAG_TOO_LARGE 116 |
| #define CIPHER_R_TOO_LARGE 117 |
| #define CIPHER_R_UNSUPPORTED_AD_SIZE 118 |
| #define CIPHER_R_UNSUPPORTED_INPUT_SIZE 119 |
| #define CIPHER_R_UNSUPPORTED_KEY_SIZE 120 |
| #define CIPHER_R_UNSUPPORTED_NONCE_SIZE 121 |
| #define CIPHER_R_UNSUPPORTED_TAG_SIZE 122 |
| #define CIPHER_R_WRONG_FINAL_BLOCK_LENGTH 123 |
| #define CIPHER_R_NO_DIRECTION_SET 124 |
| #define CIPHER_R_INVALID_NONCE 125 |
| |
| #endif // OPENSSL_HEADER_CIPHER_H |