/******************************************************************************
 *
 *  Copyright (C) 2003-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  This module contains API of the audio/video control transport protocol.
 *
 ******************************************************************************/

#include <string.h>
#include "data_types.h"
#include "bt_target.h"
#include "bt_utils.h"
#include "gki.h"
#include "l2c_api.h"
#include "l2cdefs.h"
#include "btm_api.h"
#include "avct_api.h"
#include "avct_int.h"

/* Control block for AVCT */
#if AVCT_DYNAMIC_MEMORY == FALSE
tAVCT_CB avct_cb;
#endif

/*******************************************************************************
**
** Function         AVCT_Register
**
** Description      This is the system level registration function for the
**                  AVCTP protocol.  This function initializes AVCTP and
**                  prepares the protocol stack for its use.  This function
**                  must be called once by the system or platform using AVCTP
**                  before the other functions of the API an be used.
**
**
** Returns          void
**
*******************************************************************************/
void AVCT_Register(UINT16 mtu, UINT16 mtu_br, UINT8 sec_mask)
{
    UNUSED(mtu_br);

    AVCT_TRACE_API0("AVCT_Register");

    /* register PSM with L2CAP */
    L2CA_Register(AVCT_PSM, (tL2CAP_APPL_INFO *) &avct_l2c_appl);

    /* set security level */
    BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVCTP, sec_mask, AVCT_PSM, 0, 0);
    BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_AVCTP, sec_mask, AVCT_PSM, 0, 0);

    /* initialize AVCTP data structures */
    memset(&avct_cb, 0, sizeof(tAVCT_CB));

#if (AVCT_BROWSE_INCLUDED == TRUE)
    /* Include the browsing channel which uses eFCR */
    L2CA_Register(AVCT_BR_PSM, (tL2CAP_APPL_INFO *) &avct_l2c_br_appl);

    BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVCTP_BROWSE, sec_mask, AVCT_BR_PSM, 0, 0);
    BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_AVCTP_BROWSE, sec_mask, AVCT_BR_PSM, 0, 0);

    if (mtu_br < AVCT_MIN_BROWSE_MTU)
        mtu_br = AVCT_MIN_BROWSE_MTU;
    avct_cb.mtu_br = mtu_br;
#endif

#if defined(AVCT_INITIAL_TRACE_LEVEL)
    avct_cb.trace_level = AVCT_INITIAL_TRACE_LEVEL;
#else
    avct_cb.trace_level = BT_TRACE_LEVEL_NONE;
#endif

    if (mtu < AVCT_MIN_CONTROL_MTU)
        mtu = AVCT_MIN_CONTROL_MTU;
    /* store mtu */
    avct_cb.mtu = mtu;
}

/*******************************************************************************
**
** Function         AVCT_Deregister
**
** Description      This function is called to deregister use AVCTP protocol.
**                  It is called when AVCTP is no longer being used by any
**                  application in the system.  Before this function can be
**                  called, all connections must be removed with
**                  AVCT_RemoveConn().
**
**
** Returns          void
**
*******************************************************************************/
void AVCT_Deregister(void)
{
    AVCT_TRACE_API0("AVCT_Deregister");

    /* deregister PSM with L2CAP */
    L2CA_Deregister(AVCT_PSM);
}

/*******************************************************************************
**
** Function         AVCT_CreateConn
**
** Description      Create an AVCTP connection.  There are two types of
**                  connections, initiator and acceptor, as determined by
**                  the p_cc->role parameter.  When this function is called to
**                  create an initiator connection, an AVCTP connection to
**                  the peer device is initiated if one does not already exist.
**                  If an acceptor connection is created, the connection waits
**                  passively for an incoming AVCTP connection from a peer device.
**
**
** Returns          AVCT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
UINT16 AVCT_CreateConn(UINT8 *p_handle, tAVCT_CC *p_cc, BD_ADDR peer_addr)
{
    UINT16      result = AVCT_SUCCESS;
    tAVCT_CCB   *p_ccb;
    tAVCT_LCB   *p_lcb;

    AVCT_TRACE_API2("AVCT_CreateConn: %d, control:%d", p_cc->role, p_cc->control);

    /* Allocate ccb; if no ccbs, return failure */
    if ((p_ccb = avct_ccb_alloc(p_cc)) == NULL)
    {
        result = AVCT_NO_RESOURCES;
    }
    else
    {
        /* get handle */
        *p_handle = avct_ccb_to_idx(p_ccb);

        /* if initiator connection */
        if (p_cc->role == AVCT_INT)
        {
            /* find link; if none allocate a new one */
            if ((p_lcb = avct_lcb_by_bd(peer_addr)) == NULL)
            {
                if ((p_lcb = avct_lcb_alloc(peer_addr)) == NULL)
                {
                    /* no link resources; free ccb as well */
                    avct_ccb_dealloc(p_ccb, AVCT_NO_EVT, 0, NULL);
                    result = AVCT_NO_RESOURCES;
                }
            }
            /* check if PID already in use */
            else if (avct_lcb_has_pid(p_lcb, p_cc->pid))
            {
                avct_ccb_dealloc(p_ccb, AVCT_NO_EVT, 0, NULL);
                result = AVCT_PID_IN_USE;
            }

            if (result == AVCT_SUCCESS)
            {
                /* bind lcb to ccb */
                p_ccb->p_lcb = p_lcb;
                AVCT_TRACE_DEBUG1("ch_state: %d", p_lcb->ch_state);
                avct_lcb_event(p_lcb, AVCT_LCB_UL_BIND_EVT, (tAVCT_LCB_EVT *) &p_ccb);
            }
        }
    }
    return result;
}

/*******************************************************************************
**
** Function         AVCT_RemoveConn
**
** Description      Remove an AVCTP connection.  This function is called when
**                  the application is no longer using a connection.  If this
**                  is the last connection to a peer the L2CAP channel for AVCTP
**                  will be closed.
**
**
** Returns          AVCT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
UINT16 AVCT_RemoveConn(UINT8 handle)
{
    UINT16              result = AVCT_SUCCESS;
    tAVCT_CCB           *p_ccb;

    AVCT_TRACE_API0("AVCT_RemoveConn");

    /* map handle to ccb */
    if ((p_ccb = avct_ccb_by_idx(handle)) == NULL)
    {
        result = AVCT_BAD_HANDLE;
    }
    /* if connection not bound to lcb, dealloc */
    else if (p_ccb->p_lcb == NULL)
    {
        avct_ccb_dealloc(p_ccb, AVCT_NO_EVT, 0, NULL);
    }
    /* send unbind event to lcb */
    else
    {
        avct_lcb_event(p_ccb->p_lcb, AVCT_LCB_UL_UNBIND_EVT, (tAVCT_LCB_EVT *) &p_ccb);
    }
    return result;
}

/*******************************************************************************
**
** Function         AVCT_CreateBrowse
**
** Description      Create an AVCTP Browse channel.  There are two types of
**                  connections, initiator and acceptor, as determined by
**                  the role parameter.  When this function is called to
**                  create an initiator connection, the Browse channel to
**                  the peer device is initiated if one does not already exist.
**                  If an acceptor connection is created, the connection waits
**                  passively for an incoming AVCTP connection from a peer device.
**
**
** Returns          AVCT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
UINT16 AVCT_CreateBrowse (UINT8 handle, UINT8 role)
{
#if (AVCT_BROWSE_INCLUDED == TRUE)
    UINT16      result = AVCT_SUCCESS;
    tAVCT_CCB   *p_ccb;
    tAVCT_BCB   *p_bcb;
    int         index;

    AVCT_TRACE_API1("AVCT_CreateBrowse: %d", role);

    /* map handle to ccb */
    if ((p_ccb = avct_ccb_by_idx(handle)) == NULL)
    {
        return AVCT_BAD_HANDLE;
    }
    else
    {
        /* mark this CCB as supporting browsing channel */
        if ((p_ccb->allocated & AVCT_ALOC_BCB) == 0)
        {
            p_ccb->allocated |= AVCT_ALOC_BCB;
        }
    }

    /* if initiator connection */
    if (role == AVCT_INT)
    {
        /* the link control block must exist before this function is called as INT. */
        if (p_ccb->p_lcb == NULL)
        {
            result = AVCT_NOT_OPEN;
        }
        else
        {
            /* find link; if none allocate a new one */
            index = p_ccb->p_lcb->allocated;
            if (index > AVCT_NUM_LINKS)
            {
                result = AVCT_BAD_HANDLE;
            }
            else
            {
                p_bcb = &avct_cb.bcb[index - 1];
                p_bcb->allocated = index;
            }
        }

        if (result == AVCT_SUCCESS)
        {
            /* bind bcb to ccb */
            p_ccb->p_bcb = p_bcb;
            AVCT_TRACE_DEBUG1("ch_state: %d", p_bcb->ch_state);
            avct_bcb_event(p_bcb, AVCT_LCB_UL_BIND_EVT, (tAVCT_LCB_EVT *) &p_ccb);
        }
    }

    return result;
#else
    UNUSED(handle);
    UNUSED(role);
    return AVCT_NO_RESOURCES;
#endif
}

/*******************************************************************************
**
** Function         AVCT_RemoveBrowse
**
** Description      Remove an AVCTP Browse channel.  This function is called when
**                  the application is no longer using a connection.  If this
**                  is the last connection to a peer the L2CAP channel for AVCTP
**                  will be closed.
**
**
** Returns          AVCT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
UINT16 AVCT_RemoveBrowse (UINT8 handle)
{
#if (AVCT_BROWSE_INCLUDED == TRUE)
    UINT16              result = AVCT_SUCCESS;
    tAVCT_CCB           *p_ccb;

    AVCT_TRACE_API0("AVCT_RemoveBrowse");

    /* map handle to ccb */
    if ((p_ccb = avct_ccb_by_idx(handle)) == NULL)
    {
        result = AVCT_BAD_HANDLE;
    }
    else if (p_ccb->p_bcb != NULL)
    /* send unbind event to bcb */
    {
        avct_bcb_event(p_ccb->p_bcb, AVCT_LCB_UL_UNBIND_EVT, (tAVCT_LCB_EVT *) &p_ccb);
    }
    return result;
#else
    UNUSED(handle);
    return AVCT_NO_RESOURCES;
#endif
}

/*******************************************************************************
**
** Function         AVCT_GetBrowseMtu
**
** Description      Get the peer_mtu for the AVCTP Browse channel of the given
**                  connection.
**
** Returns          the peer browsing channel MTU.
**
*******************************************************************************/
UINT16 AVCT_GetBrowseMtu (UINT8 handle)
{
    UINT16  peer_mtu = AVCT_MIN_BROWSE_MTU;
#if (AVCT_BROWSE_INCLUDED == TRUE)
    tAVCT_CCB           *p_ccb;

    if ((p_ccb = avct_ccb_by_idx(handle)) != NULL && p_ccb->p_bcb != NULL)
    {
        peer_mtu = p_ccb->p_bcb->peer_mtu;
    }
#else
    UNUSED(handle);
#endif
    return peer_mtu;
}

/*******************************************************************************
**
** Function         AVCT_GetPeerMtu
**
** Description      Get the peer_mtu for the AVCTP channel of the given
**                  connection.
**
** Returns          the peer MTU size.
**
*******************************************************************************/
UINT16 AVCT_GetPeerMtu (UINT8 handle)
{
    UINT16      peer_mtu = L2CAP_DEFAULT_MTU;
    tAVCT_CCB   *p_ccb;

    /* map handle to ccb */
    if ((p_ccb = avct_ccb_by_idx(handle)) != NULL)
    {
        if (p_ccb->p_lcb)
        {
            peer_mtu = p_ccb->p_lcb->peer_mtu;
        }
    }

    return peer_mtu;
}

/*******************************************************************************
**
** Function         AVCT_MsgReq
**
** Description      Send an AVCTP message to a peer device.  In calling
**                  AVCT_MsgReq(), the application should keep track of the
**                  congestion state of AVCTP as communicated with events
**                  AVCT_CONG_IND_EVT and AVCT_UNCONG_IND_EVT.   If the
**                  application calls AVCT_MsgReq() when AVCTP is congested
**                  the message may be discarded.  The application may make its
**                  first call to AVCT_MsgReq() after it receives an
**                  AVCT_CONNECT_CFM_EVT or AVCT_CONNECT_IND_EVT on control channel or
**                  AVCT_BROWSE_CONN_CFM_EVT or AVCT_BROWSE_CONN_IND_EVT on browsing channel.
**
**                  p_msg->layer_specific must be set to
**                  AVCT_DATA_CTRL for control channel traffic;
**                  AVCT_DATA_BROWSE for for browse channel traffic.
**
** Returns          AVCT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
UINT16 AVCT_MsgReq(UINT8 handle, UINT8 label, UINT8 cr, BT_HDR *p_msg)
{
    UINT16          result = AVCT_SUCCESS;
    tAVCT_CCB       *p_ccb;
    tAVCT_UL_MSG    ul_msg;

    AVCT_TRACE_API0("AVCT_MsgReq");

    /* verify p_msg parameter */
    if (p_msg == NULL)
    {
        return AVCT_NO_RESOURCES;
    }
    AVCT_TRACE_API1("len: %d", p_msg->len);

    /* map handle to ccb */
    if ((p_ccb = avct_ccb_by_idx(handle)) == NULL)
    {
        result = AVCT_BAD_HANDLE;
        GKI_freebuf(p_msg);
    }
    /* verify channel is bound to link */
    else if (p_ccb->p_lcb == NULL)
    {
        result = AVCT_NOT_OPEN;
        GKI_freebuf(p_msg);
    }

    if (result == AVCT_SUCCESS)
    {
        ul_msg.p_buf = p_msg;
        ul_msg.p_ccb = p_ccb;
        ul_msg.label = label;
        ul_msg.cr = cr;

#if (AVCT_BROWSE_INCLUDED == TRUE)
        /* send msg event to bcb */
        if (p_msg->layer_specific == AVCT_DATA_BROWSE)
        {
            if (p_ccb->p_bcb == NULL && (p_ccb->allocated & AVCT_ALOC_BCB) == 0)
            {
                /* BCB channel is not open and not allocated */
                result = AVCT_BAD_HANDLE;
                GKI_freebuf(p_msg);
            }
            else
            {
                p_ccb->p_bcb = avct_bcb_by_lcb(p_ccb->p_lcb);
                avct_bcb_event(p_ccb->p_bcb, AVCT_LCB_UL_MSG_EVT, (tAVCT_LCB_EVT *) &ul_msg);
            }
        }
        /* send msg event to lcb */
        else
#endif
        {
            avct_lcb_event(p_ccb->p_lcb, AVCT_LCB_UL_MSG_EVT, (tAVCT_LCB_EVT *) &ul_msg);
        }
    }
    return result;
}