| /****************************************************************************** |
| * |
| * Copyright (C) 2006-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This is the public interface file the BTA Java I/F |
| * |
| ******************************************************************************/ |
| #ifndef BTA_JV_API_H |
| #define BTA_JV_API_H |
| |
| #include "data_types.h" |
| #include "bt_target.h" |
| #include "bt_types.h" |
| #include "bta_api.h" |
| #include "btm_api.h" |
| /***************************************************************************** |
| ** Constants and data types |
| *****************************************************************************/ |
| /* status values */ |
| #define BTA_JV_SUCCESS 0 /* Successful operation. */ |
| #define BTA_JV_FAILURE 1 /* Generic failure. */ |
| #define BTA_JV_BUSY 2 /* Temporarily can not handle this request. */ |
| #define BTA_JV_NO_DATA 3 /* no data. */ |
| #define BTA_JV_NO_RESOURCE 4 /* No more set pm control block */ |
| |
| typedef UINT8 tBTA_JV_STATUS; |
| #define BTA_JV_INTERNAL_ERR (-1) /* internal error. */ |
| |
| #define BTA_JV_MAX_UUIDS SDP_MAX_UUID_FILTERS |
| #define BTA_JV_MAX_ATTRS SDP_MAX_ATTR_FILTERS |
| #define BTA_JV_MAX_SDP_REC SDP_MAX_RECORDS |
| #if SDP_FOR_JV_INCLUDED == TRUE |
| #define BTA_JV_MAX_L2C_CONN (GAP_MAX_CONNECTIONS + 1) |
| #else |
| #define BTA_JV_MAX_L2C_CONN GAP_MAX_CONNECTIONS |
| #endif |
| #define BTA_JV_MAX_SCN PORT_MAX_RFC_PORTS /* same as BTM_MAX_SCN (in btm_int.h) */ |
| #define BTA_JV_MAX_RFC_CONN MAX_RFC_PORTS |
| |
| #ifndef BTA_JV_DEF_RFC_MTU |
| #define BTA_JV_DEF_RFC_MTU (3*330) |
| #endif |
| |
| /* */ |
| #ifndef BTA_JV_MAX_RFC_SR_SESSION |
| #define BTA_JV_MAX_RFC_SR_SESSION MAX_BD_CONNECTIONS |
| #endif |
| |
| /* BTA_JV_MAX_RFC_SR_SESSION can not be bigger than MAX_BD_CONNECTIONS */ |
| #if (BTA_JV_MAX_RFC_SR_SESSION > MAX_BD_CONNECTIONS) |
| #undef BTA_JV_MAX_RFC_SR_SESSION |
| #define BTA_JV_MAX_RFC_SR_SESSION MAX_BD_CONNECTIONS |
| #endif |
| |
| #define BTA_JV_FIRST_SERVICE_ID BTA_FIRST_JV_SERVICE_ID |
| #define BTA_JV_LAST_SERVICE_ID BTA_LAST_JV_SERVICE_ID |
| #define BTA_JV_NUM_SERVICE_ID (BTA_LAST_JV_SERVICE_ID - BTA_FIRST_JV_SERVICE_ID + 1) |
| |
| /* Discoverable modes */ |
| enum |
| { |
| BTA_JV_DISC_NONE, |
| BTA_JV_DISC_LIMITED, |
| BTA_JV_DISC_GENERAL |
| }; |
| typedef UINT16 tBTA_JV_DISC; |
| |
| /* Security Mode (BTA_JvGetSecurityMode) */ |
| #define BTA_JV_SEC_MODE_UNDEFINED BTM_SEC_MODE_UNDEFINED /* 0 */ |
| #define BTA_JV_SEC_MODE_NONE BTM_SEC_MODE_NONE /* 1 */ |
| #define BTA_JV_SEC_MODE_SERVICE BTM_SEC_MODE_SERVICE /* 2 */ |
| #define BTA_JV_SEC_MODE_LINK BTM_SEC_MODE_LINK /* 3 */ |
| #define BTA_JV_SEC_MODE_SP BTM_SEC_MODE_SP /* 4 */ |
| #define BTA_JV_SEC_MODE_SP_DEBUG BTM_SEC_MODE_SP_DEBUG /* 5 */ |
| typedef UINT8 tBTA_JV_SEC_MODE; |
| |
| #define BTA_JV_ROLE_SLAVE BTM_ROLE_SLAVE |
| #define BTA_JV_ROLE_MASTER BTM_ROLE_MASTER |
| typedef UINT32 tBTA_JV_ROLE; |
| |
| #define BTA_JV_SERVICE_LMTD_DISCOVER BTM_COD_SERVICE_LMTD_DISCOVER /* 0x0020 */ |
| #define BTA_JV_SERVICE_POSITIONING BTM_COD_SERVICE_POSITIONING /* 0x0100 */ |
| #define BTA_JV_SERVICE_NETWORKING BTM_COD_SERVICE_NETWORKING /* 0x0200 */ |
| #define BTA_JV_SERVICE_RENDERING BTM_COD_SERVICE_RENDERING /* 0x0400 */ |
| #define BTA_JV_SERVICE_CAPTURING BTM_COD_SERVICE_CAPTURING /* 0x0800 */ |
| #define BTA_JV_SERVICE_OBJ_TRANSFER BTM_COD_SERVICE_OBJ_TRANSFER /* 0x1000 */ |
| #define BTA_JV_SERVICE_AUDIO BTM_COD_SERVICE_AUDIO /* 0x2000 */ |
| #define BTA_JV_SERVICE_TELEPHONY BTM_COD_SERVICE_TELEPHONY /* 0x4000 */ |
| #define BTA_JV_SERVICE_INFORMATION BTM_COD_SERVICE_INFORMATION /* 0x8000 */ |
| |
| /* JV ID type */ |
| #define BTA_JV_PM_ID_1 1 /* PM example profile 1 */ |
| #define BTA_JV_PM_ID_2 2 /* PM example profile 2 */ |
| #define BTA_JV_PM_ID_CLEAR 0 /* Special JV ID used to clear PM profile */ |
| #define BTA_JV_PM_ALL 0xFF /* Generic match all id, see bta_dm_cfg.c */ |
| typedef UINT8 tBTA_JV_PM_ID; |
| |
| #define BTA_JV_PM_HANDLE_CLEAR 0xFF /* Special JV ID used to clear PM profile */ |
| |
| /* define maximum number of registered PM entities. should be in sync with bta pm! */ |
| #ifndef BTA_JV_PM_MAX_NUM |
| #define BTA_JV_PM_MAX_NUM 5 |
| #endif |
| |
| /* JV pm connection states */ |
| enum |
| { |
| BTA_JV_CONN_OPEN = 0, /* Connection opened state */ |
| BTA_JV_CONN_CLOSE, /* Connection closed state */ |
| BTA_JV_APP_OPEN, /* JV Application opened state */ |
| BTA_JV_APP_CLOSE, /* JV Application closed state */ |
| BTA_JV_SCO_OPEN, /* SCO connection opened state */ |
| BTA_JV_SCO_CLOSE, /* SCO connection opened state */ |
| BTA_JV_CONN_IDLE, /* Connection idle state */ |
| BTA_JV_CONN_BUSY, /* Connection busy state */ |
| BTA_JV_MAX_CONN_STATE /* Max number of connection state */ |
| }; |
| typedef UINT8 tBTA_JV_CONN_STATE; |
| |
| /* Java I/F callback events */ |
| /* events received by tBTA_JV_DM_CBACK */ |
| #define BTA_JV_ENABLE_EVT 0 /* JV enabled */ |
| #define BTA_JV_SET_DISCOVER_EVT 1 /* the result for BTA_JvSetDiscoverability */ |
| #define BTA_JV_LOCAL_ADDR_EVT 2 /* Local device address */ |
| #define BTA_JV_LOCAL_NAME_EVT 3 /* Local device name */ |
| #define BTA_JV_REMOTE_NAME_EVT 4 /* Remote device name */ |
| #define BTA_JV_SET_ENCRYPTION_EVT 5 /* Set Encryption */ |
| #define BTA_JV_GET_SCN_EVT 6 /* Reserved an SCN */ |
| #define BTA_JV_GET_PSM_EVT 7 /* Reserved a PSM */ |
| #define BTA_JV_DISCOVERY_COMP_EVT 8 /* SDP discovery complete */ |
| #define BTA_JV_SERVICES_LEN_EVT 9 /* the result for BTA_JvGetServicesLength */ |
| #define BTA_JV_SERVICE_SEL_EVT 10 /* the result for BTA_JvServiceSelect */ |
| #define BTA_JV_CREATE_RECORD_EVT 11 /* the result for BTA_JvCreateRecord */ |
| #define BTA_JV_UPDATE_RECORD_EVT 12 /* the result for BTA_JvUpdateRecord */ |
| #define BTA_JV_ADD_ATTR_EVT 13 /* the result for BTA_JvAddAttribute */ |
| #define BTA_JV_DELETE_ATTR_EVT 14 /* the result for BTA_JvDeleteAttribute */ |
| #define BTA_JV_CANCEL_DISCVRY_EVT 15 /* the result for BTA_JvCancelDiscovery */ |
| |
| /* events received by tBTA_JV_L2CAP_CBACK */ |
| #define BTA_JV_L2CAP_OPEN_EVT 16 /* open status of L2CAP connection */ |
| #define BTA_JV_L2CAP_CLOSE_EVT 17 /* L2CAP connection closed */ |
| #define BTA_JV_L2CAP_START_EVT 18 /* L2CAP server started */ |
| #define BTA_JV_L2CAP_CL_INIT_EVT 19 /* L2CAP client initiated a connection */ |
| #define BTA_JV_L2CAP_DATA_IND_EVT 20 /* L2CAP connection received data */ |
| #define BTA_JV_L2CAP_CONG_EVT 21 /* L2CAP connection congestion status changed */ |
| #define BTA_JV_L2CAP_READ_EVT 22 /* the result for BTA_JvL2capRead */ |
| #define BTA_JV_L2CAP_RECEIVE_EVT 23 /* the result for BTA_JvL2capReceive*/ |
| #define BTA_JV_L2CAP_WRITE_EVT 24 /* the result for BTA_JvL2capWrite*/ |
| |
| /* events received by tBTA_JV_RFCOMM_CBACK */ |
| #define BTA_JV_RFCOMM_OPEN_EVT 25 /* open status of RFCOMM Client connection */ |
| #define BTA_JV_RFCOMM_CLOSE_EVT 26 /* RFCOMM connection closed */ |
| #define BTA_JV_RFCOMM_START_EVT 27 /* RFCOMM server started */ |
| #define BTA_JV_RFCOMM_CL_INIT_EVT 28 /* RFCOMM client initiated a connection */ |
| #define BTA_JV_RFCOMM_DATA_IND_EVT 29 /* RFCOMM connection received data */ |
| #define BTA_JV_RFCOMM_CONG_EVT 30 /* RFCOMM connection congestion status changed */ |
| #define BTA_JV_RFCOMM_READ_EVT 31 /* the result for BTA_JvRfcommRead */ |
| #define BTA_JV_RFCOMM_WRITE_EVT 32 /* the result for BTA_JvRfcommWrite*/ |
| #define BTA_JV_RFCOMM_SRV_OPEN_EVT 33 /* open status of Server RFCOMM connection */ |
| #define BTA_JV_MAX_EVT 34 /* max number of JV events */ |
| |
| typedef UINT16 tBTA_JV_EVT; |
| |
| /* data associated with BTA_JV_SET_DISCOVER_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| tBTA_JV_DISC disc_mode; /* The current discoverable mode */ |
| } tBTA_JV_SET_DISCOVER; |
| |
| /* data associated with BTA_JV_DISCOVERY_COMP_EVT_ */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| int scn; /* channel # */ |
| } tBTA_JV_DISCOVERY_COMP; |
| |
| /* data associated with BTA_JV_SET_ENCRYPTION_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| BD_ADDR bd_addr; /* The peer address */ |
| } tBTA_JV_SET_ENCRYPTION; |
| |
| /* data associated with BTA_JV_SERVICES_LEN_EVT */ |
| typedef struct |
| { |
| INT32 num_services; /* -1, if error. Otherwise, the number of |
| * services collected from peer */ |
| UINT16 *p_services_len; /* this points the same location as the |
| * parameter in BTA_JvGetServicesLength() */ |
| } tBTA_JV_SERVICES_LEN; |
| |
| /* data associated with BTA_JV_SERVICE_SEL_EVT */ |
| typedef struct |
| { |
| BD_ADDR bd_addr; /* The peer address */ |
| UINT16 service_len; /* the length of this record */ |
| } tBTA_JV_SERVICE_SEL; |
| |
| /* data associated with BTA_JV_CREATE_RECORD_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| } tBTA_JV_CREATE_RECORD; |
| |
| /* data associated with BTA_JV_UPDATE_RECORD_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The SDP record handle was updated */ |
| } tBTA_JV_UPDATE_RECORD; |
| |
| /* data associated with BTA_JV_ADD_ATTR_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The SDP record handle was updated */ |
| } tBTA_JV_ADD_ATTR; |
| |
| /* data associated with BTA_JV_DELETE_ATTR_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The SDP record handle was updated */ |
| } tBTA_JV_DELETE_ATTR; |
| |
| /* data associated with BTA_JV_L2CAP_OPEN_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| BD_ADDR rem_bda; /* The peer address */ |
| INT32 tx_mtu; /* The transmit MTU */ |
| } tBTA_JV_L2CAP_OPEN; |
| |
| /* data associated with BTA_JV_L2CAP_CLOSE_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| BOOLEAN async; /* FALSE, if local initiates disconnect */ |
| } tBTA_JV_L2CAP_CLOSE; |
| |
| /* data associated with BTA_JV_L2CAP_START_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| UINT8 sec_id; /* security ID used by this server */ |
| } tBTA_JV_L2CAP_START; |
| |
| /* data associated with BTA_JV_L2CAP_CL_INIT_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| UINT8 sec_id; /* security ID used by this client */ |
| } tBTA_JV_L2CAP_CL_INIT; |
| |
| /* data associated with BTA_JV_L2CAP_CONG_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| BOOLEAN cong; /* TRUE, congested. FALSE, uncongested */ |
| } tBTA_JV_L2CAP_CONG; |
| |
| /* data associated with BTA_JV_L2CAP_READ_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| UINT32 req_id; /* The req_id in the associated BTA_JvL2capRead() */ |
| UINT8 *p_data; /* This points the same location as the p_data |
| * parameter in BTA_JvL2capRead () */ |
| UINT16 len; /* The length of the data read. */ |
| } tBTA_JV_L2CAP_READ; |
| |
| /* data associated with BTA_JV_L2CAP_RECEIVE_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| UINT32 req_id; /* The req_id in the associated BTA_JvL2capReceive() */ |
| UINT8 *p_data; /* This points the same location as the p_data |
| * parameter in BTA_JvL2capReceive () */ |
| UINT16 len; /* The length of the data read. */ |
| } tBTA_JV_L2CAP_RECEIVE; |
| |
| /* data associated with BTA_JV_L2CAP_WRITE_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| UINT32 req_id; /* The req_id in the associated BTA_JvL2capWrite() */ |
| UINT16 len; /* The length of the data written. */ |
| BOOLEAN cong; /* congestion status */ |
| } tBTA_JV_L2CAP_WRITE; |
| |
| /* data associated with BTA_JV_RFCOMM_OPEN_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| BD_ADDR rem_bda; /* The peer address */ |
| } tBTA_JV_RFCOMM_OPEN; |
| /* data associated with BTA_JV_RFCOMM_SRV_OPEN_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| UINT32 new_listen_handle; /* The new listen handle */ |
| BD_ADDR rem_bda; /* The peer address */ |
| } tBTA_JV_RFCOMM_SRV_OPEN; |
| |
| |
| /* data associated with BTA_JV_RFCOMM_CLOSE_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 port_status; /* PORT status */ |
| UINT32 handle; /* The connection handle */ |
| BOOLEAN async; /* FALSE, if local initiates disconnect */ |
| } tBTA_JV_RFCOMM_CLOSE; |
| |
| /* data associated with BTA_JV_RFCOMM_START_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| UINT8 sec_id; /* security ID used by this server */ |
| BOOLEAN use_co; /* TRUE to use co_rfc_data */ |
| } tBTA_JV_RFCOMM_START; |
| |
| /* data associated with BTA_JV_RFCOMM_CL_INIT_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| UINT8 sec_id; /* security ID used by this client */ |
| BOOLEAN use_co; /* TRUE to use co_rfc_data */ |
| } tBTA_JV_RFCOMM_CL_INIT; |
| /*data associated with BTA_JV_L2CAP_DATA_IND_EVT & BTA_JV_RFCOMM_DATA_IND_EVT */ |
| typedef struct |
| { |
| UINT32 handle; /* The connection handle */ |
| } tBTA_JV_DATA_IND; |
| |
| /* data associated with BTA_JV_RFCOMM_CONG_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| BOOLEAN cong; /* TRUE, congested. FALSE, uncongested */ |
| } tBTA_JV_RFCOMM_CONG; |
| |
| /* data associated with BTA_JV_RFCOMM_READ_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| UINT32 req_id; /* The req_id in the associated BTA_JvRfcommRead() */ |
| UINT8 *p_data; /* This points the same location as the p_data |
| * parameter in BTA_JvRfcommRead () */ |
| UINT16 len; /* The length of the data read. */ |
| } tBTA_JV_RFCOMM_READ; |
| |
| /* data associated with BTA_JV_RFCOMM_WRITE_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Whether the operation succeeded or failed. */ |
| UINT32 handle; /* The connection handle */ |
| UINT32 req_id; /* The req_id in the associated BTA_JvRfcommWrite() */ |
| int len; /* The length of the data written. */ |
| BOOLEAN cong; /* congestion status */ |
| } tBTA_JV_RFCOMM_WRITE; |
| |
| /* data associated with BTA_JV_API_SET_PM_PROFILE_EVT */ |
| typedef struct |
| { |
| tBTA_JV_STATUS status; /* Status of the operation */ |
| UINT32 handle; /* Connection handle */ |
| tBTA_JV_PM_ID app_id; /* JV app ID */ |
| } tBTA_JV_SET_PM_PROFILE; |
| |
| /* data associated with BTA_JV_API_NOTIFY_PM_STATE_CHANGE_EVT */ |
| typedef struct |
| { |
| UINT32 handle; /* Connection handle */ |
| tBTA_JV_CONN_STATE state; /* JV connection stata */ |
| } tBTA_JV_NOTIFY_PM_STATE_CHANGE; |
| |
| |
| /* union of data associated with JV callback */ |
| typedef union |
| { |
| tBTA_JV_STATUS status; /* BTA_JV_ENABLE_EVT */ |
| tBTA_JV_DISCOVERY_COMP disc_comp; /* BTA_JV_DISCOVERY_COMP_EVT */ |
| tBTA_JV_SET_DISCOVER set_discover; /* BTA_JV_SET_DISCOVER_EVT */ |
| tBTA_JV_SET_ENCRYPTION set_encrypt; /* BTA_JV_SET_ENCRYPTION_EVT */ |
| BD_ADDR bd_addr; /* BTA_JV_LOCAL_ADDR_EVT */ |
| UINT8 *p_name; /* BTA_JV_LOCAL_NAME_EVT, |
| BTA_JV_REMOTE_NAME_EVT */ |
| UINT8 scn; /* BTA_JV_GET_SCN_EVT */ |
| UINT16 psm; /* BTA_JV_GET_PSM_EVT */ |
| tBTA_JV_SERVICES_LEN servs_len; /* BTA_JV_SERVICES_LEN_EVT */ |
| tBTA_JV_SERVICE_SEL serv_sel; /* BTA_JV_SERVICE_SEL_EVT */ |
| tBTA_JV_CREATE_RECORD create_rec; /* BTA_JV_CREATE_RECORD_EVT */ |
| tBTA_JV_UPDATE_RECORD update_rec; /* BTA_JV_UPDATE_RECORD_EVT */ |
| tBTA_JV_ADD_ATTR add_attr; /* BTA_JV_ADD_ATTR_EVT */ |
| tBTA_JV_DELETE_ATTR del_attr; /* BTA_JV_DELETE_ATTR_EVT */ |
| tBTA_JV_L2CAP_OPEN l2c_open; /* BTA_JV_L2CAP_OPEN_EVT */ |
| tBTA_JV_L2CAP_CLOSE l2c_close; /* BTA_JV_L2CAP_CLOSE_EVT */ |
| tBTA_JV_L2CAP_START l2c_start; /* BTA_JV_L2CAP_START_EVT */ |
| tBTA_JV_L2CAP_CL_INIT l2c_cl_init; /* BTA_JV_L2CAP_CL_INIT_EVT */ |
| tBTA_JV_L2CAP_CONG l2c_cong; /* BTA_JV_L2CAP_CONG_EVT */ |
| tBTA_JV_L2CAP_READ l2c_read; /* BTA_JV_L2CAP_READ_EVT */ |
| tBTA_JV_L2CAP_WRITE l2c_write; /* BTA_JV_L2CAP_WRITE_EVT */ |
| tBTA_JV_RFCOMM_OPEN rfc_open; /* BTA_JV_RFCOMM_OPEN_EVT */ |
| tBTA_JV_RFCOMM_SRV_OPEN rfc_srv_open; /* BTA_JV_RFCOMM_SRV_OPEN_EVT */ |
| tBTA_JV_RFCOMM_CLOSE rfc_close; /* BTA_JV_RFCOMM_CLOSE_EVT */ |
| tBTA_JV_RFCOMM_START rfc_start; /* BTA_JV_RFCOMM_START_EVT */ |
| tBTA_JV_RFCOMM_CL_INIT rfc_cl_init; /* BTA_JV_RFCOMM_CL_INIT_EVT */ |
| tBTA_JV_RFCOMM_CONG rfc_cong; /* BTA_JV_RFCOMM_CONG_EVT */ |
| tBTA_JV_RFCOMM_READ rfc_read; /* BTA_JV_RFCOMM_READ_EVT */ |
| tBTA_JV_RFCOMM_WRITE rfc_write; /* BTA_JV_RFCOMM_WRITE_EVT */ |
| tBTA_JV_DATA_IND data_ind; /* BTA_JV_L2CAP_DATA_IND_EVT |
| BTA_JV_RFCOMM_DATA_IND_EVT */ |
| } tBTA_JV; |
| |
| /* JAVA DM Interface callback */ |
| typedef void (tBTA_JV_DM_CBACK)(tBTA_JV_EVT event, tBTA_JV *p_data, void * user_data); |
| |
| /* JAVA RFCOMM interface callback */ |
| typedef void* (tBTA_JV_RFCOMM_CBACK)(tBTA_JV_EVT event, tBTA_JV *p_data, void *user_data); |
| |
| /* JAVA L2CAP interface callback */ |
| typedef void (tBTA_JV_L2CAP_CBACK)(tBTA_JV_EVT event, tBTA_JV *p_data); |
| |
| /* JV configuration structure */ |
| typedef struct |
| { |
| UINT16 sdp_raw_size; /* The size of p_sdp_raw_data */ |
| UINT16 sdp_db_size; /* The size of p_sdp_db */ |
| UINT8 *p_sdp_raw_data; /* The data buffer to keep raw data */ |
| tSDP_DISCOVERY_DB *p_sdp_db; /* The data buffer to keep SDP database */ |
| } tBTA_JV_CFG; |
| |
| /***************************************************************************** |
| ** External Function Declarations |
| *****************************************************************************/ |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvEnable |
| ** |
| ** Description Enable the Java I/F service. When the enable |
| ** operation is complete the callback function will be |
| ** called with a BTA_JV_ENABLE_EVT. This function must |
| ** be called before other functions in the JV API are |
| ** called. |
| ** |
| ** Returns BTA_JV_SUCCESS if successful. |
| ** BTA_JV_FAIL if internal failure. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvEnable(tBTA_JV_DM_CBACK *p_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvDisable |
| ** |
| ** Description Disable the Java I/F |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_JvDisable(void); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvIsEnable |
| ** |
| ** Description Get the JV registration status. |
| ** |
| ** Returns TRUE, if registered |
| ** |
| *******************************************************************************/ |
| BTA_API extern BOOLEAN BTA_JvIsEnable(void); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvSetDiscoverability |
| ** |
| ** Description This function sets the Bluetooth discoverable modes |
| ** of the local device. This controls whether other |
| ** Bluetooth devices can find the local device. |
| ** |
| ** When the operation is complete the tBTA_JV_DM_CBACK callback |
| ** function will be called with a BTA_JV_SET_DISCOVER_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS if successful. |
| ** BTA_JV_FAIL if internal failure. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvSetDiscoverability(tBTA_JV_DISC disc_mode); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvGetDiscoverability |
| ** |
| ** Description This function gets the Bluetooth |
| ** discoverable modes of local device |
| ** |
| ** Returns The current Bluetooth discoverable mode. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_DISC BTA_JvGetDiscoverability(void); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvGetLocalDeviceAddr |
| ** |
| ** Description This function obtains the local Bluetooth device address. |
| ** The local Bluetooth device address is reported by the |
| ** tBTA_JV_DM_CBACK callback with a BTA_JV_LOCAL_ADDR_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS if successful. |
| ** BTA_JV_FAIL if internal failure. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvGetLocalDeviceAddr(void); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvGetLocalDeviceName |
| ** |
| ** Description This function obtains the name of the local device |
| ** The local Bluetooth device name is reported by the |
| ** tBTA_JV_DM_CBACK callback with a BTA_JV_LOCAL_NAME_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS if successful. |
| ** BTA_JV_FAIL if internal failure. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvGetLocalDeviceName(void); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvGetRemoteDeviceName |
| ** |
| ** Description This function obtains the name of the specified device. |
| ** The Bluetooth device name is reported by the |
| ** tBTA_JV_DM_CBACK callback with a BTA_JV_REMOTE_NAME_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS if successful. |
| ** BTA_JV_FAIL if internal failure. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvGetRemoteDeviceName(BD_ADDR bd_addr); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvGetPreknownDevice |
| ** |
| ** Description This function obtains the Bluetooth address in the inquiry |
| ** database collected via the previous call to BTA_DmSearch(). |
| ** |
| ** Returns The number of preknown devices if p_bd_addr is NULL |
| ** BTA_JV_SUCCESS if successful. |
| ** BTA_JV_INTERNAL_ERR(-1) if internal failure. |
| ** |
| *******************************************************************************/ |
| BTA_API extern INT32 BTA_JvGetPreknownDevice(UINT8 * p_bd_addr, UINT32 index); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvGetDeviceClass |
| ** |
| ** Description This function obtains the local Class of Device. |
| ** |
| ** Returns DEV_CLASS, A three-byte array of UINT8 that contains the |
| ** Class of Device information. The definitions are in the |
| ** "Bluetooth Assigned Numbers". |
| ** |
| *******************************************************************************/ |
| BTA_API extern UINT8 * BTA_JvGetDeviceClass(void); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvSetServiceClass |
| ** |
| ** Description This function sets the service class of local Class of Device |
| ** |
| ** Returns BTA_JV_SUCCESS if successful. |
| ** BTA_JV_FAIL if internal failure. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvSetServiceClass(UINT32 service); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvSetEncryption |
| ** |
| ** Description This function ensures that the connection to the given device |
| ** is encrypted. |
| ** When the operation is complete the tBTA_JV_DM_CBACK callback |
| ** function will be called with a BTA_JV_SET_ENCRYPTION_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvSetEncryption(BD_ADDR bd_addr); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvIsAuthenticated |
| ** |
| ** Description This function checks if the peer device is authenticated |
| ** |
| ** Returns TRUE if authenticated. |
| ** FALSE if not. |
| ** |
| *******************************************************************************/ |
| BTA_API extern BOOLEAN BTA_JvIsAuthenticated(BD_ADDR bd_addr); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvIsTrusted |
| ** |
| ** Description This function checks if the peer device is trusted |
| ** (previously paired) |
| ** |
| ** Returns TRUE if trusted. |
| ** FALSE if not. |
| ** |
| *******************************************************************************/ |
| BTA_API extern BOOLEAN BTA_JvIsTrusted(BD_ADDR bd_addr); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvIsAuthorized |
| ** |
| ** Description This function checks if the peer device is authorized |
| ** |
| ** Returns TRUE if authorized. |
| ** FALSE if not. |
| ** |
| *******************************************************************************/ |
| BTA_API extern BOOLEAN BTA_JvIsAuthorized(BD_ADDR bd_addr); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvIsEncrypted |
| ** |
| ** Description This function checks if the link to peer device is encrypted |
| ** |
| ** Returns TRUE if encrypted. |
| ** FALSE if not. |
| ** |
| *******************************************************************************/ |
| BTA_API extern BOOLEAN BTA_JvIsEncrypted(BD_ADDR bd_addr); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvGetSecurityMode |
| ** |
| ** Description This function returns the current Bluetooth security mode |
| ** of the local device |
| ** |
| ** Returns The current Bluetooth security mode. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_SEC_MODE BTA_JvGetSecurityMode(void); |
| |
| /* BTA_JvIsMaster is replaced by BTA_DmIsMaster */ |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvGetSCN |
| ** |
| ** Description This function reserves a SCN (server channel number) for |
| ** applications running over RFCOMM. It is primarily called by |
| ** server profiles/applications to register their SCN into the |
| ** SDP database. The SCN is reported by the tBTA_JV_DM_CBACK |
| ** callback with a BTA_JV_GET_SCN_EVT. |
| ** If the SCN reported is 0, that means all SCN resources are |
| ** exhausted. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvGetSCN(void); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvFreeSCN |
| ** |
| ** Description This function frees a server channel number that was used |
| ** by an application running over RFCOMM. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvFreeSCN(UINT8 scn); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvGetPSM |
| ** |
| ** Description This function reserves a PSM (Protocol Service Multiplexer) |
| ** applications running over L2CAP. It is primarily called by |
| ** server profiles/applications to register their PSM into the |
| ** SDP database. |
| ** |
| ** Returns The next free PSM |
| ** |
| *******************************************************************************/ |
| BTA_API extern UINT16 BTA_JvGetPSM(void); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvStartDiscovery |
| ** |
| ** Description This function performs service discovery for the services |
| ** provided by the given peer device. When the operation is |
| ** complete the tBTA_JV_DM_CBACK callback function will be |
| ** called with a BTA_JV_DISCOVERY_COMP_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvStartDiscovery(BD_ADDR bd_addr, UINT16 num_uuid, |
| tSDP_UUID *p_uuid_list, void* user_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvCancelDiscovery |
| ** |
| ** Description This function cancels an active service discovery. |
| ** When the operation is |
| ** complete the tBTA_JV_DM_CBACK callback function will be |
| ** called with a BTA_JV_CANCEL_DISCVRY_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvCancelDiscovery(void * user_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvGetServicesLength |
| ** |
| ** Description This function obtains the number of services and the length |
| ** of each service found in the SDP database (result of last |
| ** BTA_JvStartDiscovery().When the operation is complete the |
| ** tBTA_JV_DM_CBACK callback function will be called with a |
| ** BTA_JV_SERVICES_LEN_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvGetServicesLength(BOOLEAN inc_hdr, UINT16 *p_services_len); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvGetServicesResult |
| ** |
| ** Description This function returns a number of service records found |
| ** during current service search, equals to the number returned |
| ** by previous call to BTA_JvGetServicesLength. |
| ** The contents of each SDP record will be returned under a |
| ** TLV (type, len, value) representation in the data buffer |
| ** provided by the caller. |
| ** |
| ** Returns -1, if error. Otherwise, the number of services |
| ** |
| *******************************************************************************/ |
| BTA_API extern INT32 BTA_JvGetServicesResult(BOOLEAN inc_hdr, UINT8 **TLVs); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvServiceSelect |
| ** |
| ** Description This function checks if the SDP database contains the given |
| ** service UUID. When the operation is complete the |
| ** tBTA_JV_DM_CBACK callback function will be called with a |
| ** BTA_JV_SERVICE_SEL_EVT with the length of the service record. |
| ** If the service is not found or error, -1 is reported. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvServiceSelect(UINT16 uuid); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvServiceResult |
| ** |
| ** Description This function returns the contents of the SDP record from |
| ** last BTA_JvServiceSelect. The contents will be returned under |
| ** a TLV (type, len, value) representation in the data buffer |
| ** provided by the caller. |
| ** |
| ** Returns -1, if error. Otherwise, the length of service record. |
| ** |
| *******************************************************************************/ |
| BTA_API extern INT32 BTA_JvServiceResult(UINT8 *TLV); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvCreateRecord |
| ** |
| ** Description Create a service record in the local SDP database by user in |
| ** tBTA_JV_DM_CBACK callback with a BTA_JV_CREATE_RECORD_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvCreateRecordByUser(void* user_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvUpdateRecord |
| ** |
| ** Description Update a service record in the local SDP database. |
| ** When the operation is complete the tBTA_JV_DM_CBACK callback |
| ** function will be called with a BTA_JV_UPDATE_RECORD_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvUpdateRecord(UINT32 handle, UINT16 *p_ids, |
| UINT8 **p_values, INT32 *p_value_sizes, INT32 array_len); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvAddAttribute |
| ** |
| ** Description Add an attribute to a service record in the local SDP database. |
| ** When the operation is complete the tBTA_JV_DM_CBACK callback |
| ** function will be called with a BTA_JV_ADD_ATTR_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvAddAttribute(UINT32 handle, UINT16 attr_id, |
| UINT8 *p_value, INT32 value_size); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvDeleteAttribute |
| ** |
| ** Description Delete an attribute from a service record in the local SDP database. |
| ** When the operation is complete the tBTA_JV_DM_CBACK callback |
| ** function will be called with a BTA_JV_DELETE_ATTR_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvDeleteAttribute(UINT32 handle, UINT16 attr_id); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvDeleteRecord |
| ** |
| ** Description Delete a service record in the local SDP database. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvDeleteRecord(UINT32 handle); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvReadRecord |
| ** |
| ** Description Read a service record in the local SDP database. |
| ** |
| ** Returns -1, if the record is not found. |
| ** Otherwise, the offset (0 or 1) to start of data in p_data. |
| ** |
| ** The size of data copied into p_data is in *p_data_len. |
| ** |
| *******************************************************************************/ |
| BTA_API extern INT32 BTA_JvReadRecord(UINT32 handle, UINT8 *p_data, INT32 *p_data_len); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvL2capConnect |
| ** |
| ** Description Initiate a connection as a L2CAP client to the given BD |
| ** Address. |
| ** When the connection is initiated or failed to initiate, |
| ** tBTA_JV_L2CAP_CBACK is called with BTA_JV_L2CAP_CL_INIT_EVT |
| ** When the connection is established or failed, |
| ** tBTA_JV_L2CAP_CBACK is called with BTA_JV_L2CAP_OPEN_EVT |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvL2capConnect(tBTA_SEC sec_mask, |
| tBTA_JV_ROLE role, UINT16 remote_psm, UINT16 rx_mtu, |
| BD_ADDR peer_bd_addr, tBTA_JV_L2CAP_CBACK *p_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvL2capClose |
| ** |
| ** Description This function closes an L2CAP client connection |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvL2capClose(UINT32 handle); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvL2capStartServer |
| ** |
| ** Description This function starts an L2CAP server and listens for an L2CAP |
| ** connection from a remote Bluetooth device. When the server |
| ** is started successfully, tBTA_JV_L2CAP_CBACK is called with |
| ** BTA_JV_L2CAP_START_EVT. When the connection is established, |
| ** tBTA_JV_L2CAP_CBACK is called with BTA_JV_L2CAP_OPEN_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvL2capStartServer(tBTA_SEC sec_mask, tBTA_JV_ROLE role, |
| UINT16 local_psm, UINT16 rx_mtu, |
| tBTA_JV_L2CAP_CBACK *p_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvL2capStopServer |
| ** |
| ** Description This function stops the L2CAP server. If the server has an |
| ** active connection, it would be closed. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvL2capStopServer(UINT16 local_psm); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvL2capRead |
| ** |
| ** Description This function reads data from an L2CAP connection |
| ** When the operation is complete, tBTA_JV_L2CAP_CBACK is |
| ** called with BTA_JV_L2CAP_READ_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvL2capRead(UINT32 handle, UINT32 req_id, |
| UINT8 *p_data, UINT16 len); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvL2capReceive |
| ** |
| ** Description This function reads data from an L2CAP connection |
| ** When the operation is complete, tBTA_JV_L2CAP_CBACK is |
| ** called with BTA_JV_L2CAP_RECEIVE_EVT. |
| ** If there are more data queued in L2CAP than len, the extra data will be discarded. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvL2capReceive(UINT32 handle, UINT32 req_id, |
| UINT8 *p_data, UINT16 len); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvL2capReady |
| ** |
| ** Description This function determined if there is data to read from |
| ** an L2CAP connection |
| ** |
| ** Returns BTA_JV_SUCCESS, if data queue size is in *p_data_size. |
| ** BTA_JV_FAILURE, if error. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvL2capReady(UINT32 handle, UINT32 *p_data_size); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvL2capWrite |
| ** |
| ** Description This function writes data to an L2CAP connection |
| ** When the operation is complete, tBTA_JV_L2CAP_CBACK is |
| ** called with BTA_JV_L2CAP_WRITE_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvL2capWrite(UINT32 handle, UINT32 req_id, |
| UINT8 *p_data, UINT16 len); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvRfcommConnect |
| ** |
| ** Description This function makes an RFCOMM conection to a remote BD |
| ** Address. |
| ** When the connection is initiated or failed to initiate, |
| ** tBTA_JV_RFCOMM_CBACK is called with BTA_JV_RFCOMM_CL_INIT_EVT |
| ** When the connection is established or failed, |
| ** tBTA_JV_RFCOMM_CBACK is called with BTA_JV_RFCOMM_OPEN_EVT |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvRfcommConnect(tBTA_SEC sec_mask, |
| tBTA_JV_ROLE role, UINT8 remote_scn, BD_ADDR peer_bd_addr, |
| tBTA_JV_RFCOMM_CBACK *p_cback, void *user_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvRfcommClose |
| ** |
| ** Description This function closes an RFCOMM connection |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvRfcommClose(UINT32 handle, void* user_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvRfcommStartServer |
| ** |
| ** Description This function starts listening for an RFCOMM connection |
| ** request from a remote Bluetooth device. When the server is |
| ** started successfully, tBTA_JV_RFCOMM_CBACK is called |
| ** with BTA_JV_RFCOMM_START_EVT. |
| ** When the connection is established, tBTA_JV_RFCOMM_CBACK |
| ** is called with BTA_JV_RFCOMM_OPEN_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvRfcommStartServer(tBTA_SEC sec_mask, |
| tBTA_JV_ROLE role, UINT8 local_scn, UINT8 max_session, |
| tBTA_JV_RFCOMM_CBACK *p_cback, void *user_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvRfcommStopServer |
| ** |
| ** Description This function stops the RFCOMM server. If the server has an |
| ** active connection, it would be closed. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvRfcommStopServer(UINT32 handle, void* user_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvRfcommRead |
| ** |
| ** Description This function reads data from an RFCOMM connection |
| ** When the operation is complete, tBTA_JV_RFCOMM_CBACK is |
| ** called with BTA_JV_RFCOMM_READ_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvRfcommRead(UINT32 handle, UINT32 req_id, |
| UINT8 *p_data, UINT16 len); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvRfcommReady |
| ** |
| ** Description This function determined if there is data to read from |
| ** an RFCOMM connection |
| ** |
| ** Returns BTA_JV_SUCCESS, if data queue size is in *p_data_size. |
| ** BTA_JV_FAILURE, if error. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvRfcommReady(UINT32 handle, UINT32 *p_data_size); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvRfcommWrite |
| ** |
| ** Description This function writes data to an RFCOMM connection |
| ** When the operation is complete, tBTA_JV_RFCOMM_CBACK is |
| ** called with BTA_JV_RFCOMM_WRITE_EVT. |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvRfcommWrite(UINT32 handle, UINT32 req_id); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JVSetPmProfile |
| ** |
| ** Description This function set or free power mode profile for different JV application |
| ** |
| ** Parameters: handle, JV handle from RFCOMM or L2CAP |
| ** app_id: app specific pm ID, can be BTA_JV_PM_ALL, see bta_dm_cfg.c for details |
| ** BTA_JV_PM_ID_CLEAR: removes pm management on the handle. init_st is ignored and |
| ** BTA_JV_CONN_CLOSE is called implicitely |
| ** init_st: state after calling this API. typically it should be BTA_JV_CONN_OPEN |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| ** NOTE: BTA_JV_PM_ID_CLEAR: In general no need to be called as jv pm calls automatically |
| ** BTA_JV_CONN_CLOSE to remove in case of connection close! |
| ** |
| *******************************************************************************/ |
| BTA_API extern tBTA_JV_STATUS BTA_JvSetPmProfile(UINT32 handle, tBTA_JV_PM_ID app_id, |
| tBTA_JV_CONN_STATE init_st); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_JvRfcommGetPortHdl |
| ** |
| ** Description This function fetches the rfcomm port handle |
| ** |
| ** Returns BTA_JV_SUCCESS, if the request is being processed. |
| ** BTA_JV_FAILURE, otherwise. |
| ** |
| *******************************************************************************/ |
| UINT16 BTA_JvRfcommGetPortHdl(UINT32 handle); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* BTA_JV_API_H */ |
| |
