| /****************************************************************************** |
| * |
| * Copyright (C) 2003-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains the action functions for device manager state |
| * machine. |
| * |
| ******************************************************************************/ |
| |
| #include "gki.h" |
| #include "bd.h" |
| #include "bta_sys.h" |
| #include "bta_api.h" |
| #include "bta_dm_int.h" |
| #include "btm_api.h" |
| |
| #include <string.h> |
| |
| |
| static void bta_dm_pm_cback(tBTA_SYS_CONN_STATUS status, UINT8 id, UINT8 app_id, BD_ADDR peer_addr); |
| static void bta_dm_pm_set_mode(BD_ADDR peer_addr, BOOLEAN timed_out ); |
| static void bta_dm_pm_timer_cback(void *p_tle); |
| static void bta_dm_pm_btm_cback(BD_ADDR bd_addr, tBTM_PM_STATUS status, UINT16 value, UINT8 hci_status); |
| static BOOLEAN bta_dm_pm_park(BD_ADDR peer_addr); |
| static BOOLEAN bta_dm_pm_sniff(tBTA_DM_PEER_DEVICE *p_peer_dev, UINT8 index); |
| static BOOLEAN bta_dm_pm_is_sco_active (); |
| static void bta_dm_pm_hid_check(BOOLEAN bScoActive); |
| static void bta_dm_pm_set_sniff_policy(tBTA_DM_PEER_DEVICE *p_dev, BOOLEAN bDisable); |
| |
| #if (BTM_SSR_INCLUDED == TRUE) |
| #if (defined BTA_HH_INCLUDED && BTA_HH_INCLUDED == TRUE) |
| #include "../hh/bta_hh_int.h" |
| /* BTA_DM_PM_SSR1 will be dedicated for HH SSR setting entry, no other profile can use it */ |
| #define BTA_DM_PM_SSR_HH BTA_DM_PM_SSR1 |
| #endif |
| static void bta_dm_pm_ssr(BD_ADDR peer_addr); |
| #endif |
| |
| tBTA_DM_CONNECTED_SRVCS bta_dm_conn_srvcs; |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_init_pm |
| ** |
| ** Description Initialises the BT low power manager |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_dm_init_pm(void) |
| { |
| |
| memset(&bta_dm_conn_srvcs, 0x00, sizeof(bta_dm_conn_srvcs)); |
| |
| /* if there are no power manger entries, so not register */ |
| if(p_bta_dm_pm_cfg[0].app_id != 0) |
| { |
| bta_sys_pm_register((tBTA_SYS_CONN_CBACK*)bta_dm_pm_cback); |
| |
| BTM_PmRegister((BTM_PM_REG_SET | BTM_PM_REG_NOTIF), &bta_dm_cb.pm_id, |
| bta_dm_pm_btm_cback); |
| } |
| |
| |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_disable_pm |
| ** |
| ** Description Disable PM |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_dm_disable_pm(void) |
| { |
| UINT8 i; |
| |
| bta_sys_pm_register(NULL); |
| BTM_PmRegister( BTM_PM_DEREG, &bta_dm_cb.pm_id, NULL); |
| |
| /* Need to stop all active timers. */ |
| for(i=0; i<BTA_DM_NUM_PM_TIMER; i++) |
| { |
| if(bta_dm_cb.pm_timer[i].in_use) |
| { |
| APPL_TRACE_DEBUG("stop dm_pm_timer:%d", i); |
| bta_sys_stop_timer(&bta_dm_cb.pm_timer[i].timer); |
| bta_dm_cb.pm_timer[i].in_use = FALSE; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_stop_timer |
| ** |
| ** Description stop a PM timer |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_dm_pm_stop_timer(BD_ADDR peer_addr) |
| { |
| UINT8 i; |
| |
| for(i=0; i<BTA_DM_NUM_PM_TIMER; i++) |
| { |
| |
| if(bta_dm_cb.pm_timer[i].in_use && !bdcmp(bta_dm_cb.pm_timer[i].peer_bdaddr, peer_addr)) |
| { |
| APPL_TRACE_DEBUG("stop dm_pm_timer:%d", i); |
| bta_sys_stop_timer(&bta_dm_cb.pm_timer[i].timer); |
| bta_dm_cb.pm_timer[i].in_use = FALSE; |
| break; |
| } |
| |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_cback |
| ** |
| ** Description Conn change callback from sys for low power management |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_dm_pm_cback(tBTA_SYS_CONN_STATUS status, UINT8 id, UINT8 app_id, BD_ADDR peer_addr) |
| { |
| |
| UINT8 i,j; |
| UINT16 policy_setting; |
| tBTM_STATUS btm_status; |
| tBTM_VERSION_INFO vers; |
| #if (BTM_SSR_INCLUDED == TRUE) |
| int index = BTA_DM_PM_SSR0; |
| #endif |
| tBTA_DM_PEER_DEVICE *p_dev; |
| |
| APPL_TRACE_DEBUG("bta_dm_pm_cback: st(%d), id(%d), app(%d)", status, id, app_id); |
| |
| btm_status = BTM_ReadLocalVersion (&vers); |
| p_dev = bta_dm_find_peer_device(peer_addr); |
| |
| /* Disable/Enable sniff policy on the SCO link if sco Up/Down. Will be removed in 2.2*/ |
| if ((p_dev) && |
| ((status == BTA_SYS_SCO_OPEN) || (status == BTA_SYS_SCO_CLOSE)) ) |
| { |
| if ((btm_status == BTM_SUCCESS) && |
| (vers.manufacturer == LMP_COMPID_BROADCOM) && |
| (vers.hci_version < HCI_PROTO_VERSION_2_0)) |
| { |
| bta_dm_pm_set_sniff_policy(p_dev, (status == BTA_SYS_SCO_OPEN)); |
| } |
| } |
| |
| /* find if there is an power mode entry for the service */ |
| for(i=1; i<=p_bta_dm_pm_cfg[0].app_id; i++) |
| { |
| |
| if((p_bta_dm_pm_cfg[i].id == id) |
| && ((p_bta_dm_pm_cfg[i].app_id == BTA_ALL_APP_ID ) || (p_bta_dm_pm_cfg[i].app_id == app_id ))) |
| break; |
| |
| } |
| |
| /* if no entries are there for the app_id and subystem in p_bta_dm_pm_spec*/ |
| if(i> p_bta_dm_pm_cfg[0].app_id) |
| return; |
| |
| bta_dm_pm_stop_timer(peer_addr); |
| /*p_dev = bta_dm_find_peer_device(peer_addr);*/ |
| |
| #if (BTM_SSR_INCLUDED == TRUE) |
| /* set SSR parameters on SYS CONN OPEN */ |
| if((BTA_SYS_CONN_OPEN == status) && p_dev && (p_dev->info & BTA_DM_DI_USE_SSR)) |
| { |
| index = p_bta_dm_pm_spec[p_bta_dm_pm_cfg[i].spec_idx].ssr; |
| } |
| #endif |
| |
| /* if no action for the event */ |
| if(p_bta_dm_pm_spec[p_bta_dm_pm_cfg[i].spec_idx].actn_tbl[status][0].power_mode == BTA_DM_PM_NO_ACTION) |
| { |
| #if (BTM_SSR_INCLUDED == TRUE) |
| if(BTA_DM_PM_SSR0 == index) /* and do not need to set SSR, return. */ |
| #endif |
| return; |
| } |
| |
| for(j=0; j<bta_dm_conn_srvcs.count ; j++) |
| { |
| /* check if an entry already present */ |
| if((bta_dm_conn_srvcs.conn_srvc[j].id == id) |
| && (bta_dm_conn_srvcs.conn_srvc[j].app_id == app_id ) |
| && !bdcmp(bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr, peer_addr)) |
| break; |
| |
| } |
| |
| /* if subsystem has no more preference on the power mode remove |
| the cb */ |
| if(p_bta_dm_pm_spec[p_bta_dm_pm_cfg[i].spec_idx].actn_tbl[status][0].power_mode == BTA_DM_PM_NO_PREF) |
| { |
| |
| if(j != bta_dm_conn_srvcs.count) |
| { |
| bta_dm_conn_srvcs.count--; |
| |
| for(; j<bta_dm_conn_srvcs.count ; j++) |
| { |
| |
| memcpy(&bta_dm_conn_srvcs.conn_srvc[j], &bta_dm_conn_srvcs.conn_srvc[j+1], sizeof(bta_dm_conn_srvcs.conn_srvc[j])); |
| |
| } |
| } |
| else |
| { |
| APPL_TRACE_WARNING("bta_dm_act no entry for connected service cbs"); |
| return; |
| } |
| } |
| else if(j == bta_dm_conn_srvcs.count ) |
| { |
| /* check if we have more connected service that cbs */ |
| if(bta_dm_conn_srvcs.count == BTA_DM_NUM_CONN_SRVS) |
| { |
| APPL_TRACE_WARNING("bta_dm_act no more connected service cbs"); |
| return; |
| } |
| |
| /* fill in a new cb */ |
| bta_dm_conn_srvcs.conn_srvc[j].id = id; |
| bta_dm_conn_srvcs.conn_srvc[j].app_id = app_id; |
| bdcpy(bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr, peer_addr); |
| |
| APPL_TRACE_WARNING("new conn_srvc id:%d, app_id:%d", id, app_id); |
| |
| bta_dm_conn_srvcs.count++; |
| bta_dm_conn_srvcs.conn_srvc[j].state = status; |
| } |
| else |
| { |
| /* no service is added or removed. only updating status. */ |
| bta_dm_conn_srvcs.conn_srvc[j].state = status; |
| } |
| |
| if(p_dev) |
| { |
| p_dev->pm_mode_attempted = 0; |
| p_dev->pm_mode_failed = 0; |
| } |
| |
| #if (BTM_SSR_INCLUDED == TRUE) |
| if(p_bta_dm_ssr_spec[index].max_lat |
| #if (defined BTA_HH_INCLUDED && BTA_HH_INCLUDED == TRUE) |
| || index == BTA_DM_PM_SSR_HH |
| #endif |
| ) |
| { |
| bta_dm_pm_ssr(peer_addr); |
| } |
| #endif |
| |
| bta_dm_pm_set_mode(peer_addr, FALSE); |
| |
| /* perform the HID link workaround if needed |
| ** 1. If SCO up/down event is received OR |
| ** 2. If HID connection open is received and SCO is already active. |
| ** This will handle the case where HID connects when SCO already active |
| */ |
| if ( (btm_status == BTM_SUCCESS) && |
| ( ((status == BTA_SYS_SCO_OPEN) || (status == BTA_SYS_SCO_CLOSE)) || |
| ((status == BTA_SYS_CONN_OPEN) && (id == BTA_ID_HH) && bta_dm_pm_is_sco_active()) ) ) |
| { |
| BOOLEAN bScoActive; |
| if (status == BTA_SYS_CONN_OPEN) |
| bScoActive = TRUE; |
| else |
| bScoActive = (status == BTA_SYS_SCO_OPEN); |
| |
| bta_dm_pm_hid_check(bScoActive); |
| } |
| |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_set_mode |
| ** |
| ** Description Set the power mode for the device |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_dm_pm_set_mode(BD_ADDR peer_addr, BOOLEAN timed_out ) |
| { |
| |
| tBTA_DM_PM_ACTTION pm_action = BTA_DM_PM_NO_ACTION; |
| UINT16 timeout = 0; |
| UINT8 i,j; |
| tBTA_DM_PM_ACTTION failed_pm = 0; |
| tBTA_DM_PEER_DEVICE *p_peer_device = NULL; |
| tBTA_DM_PM_ACTTION allowed_modes = 0; |
| tBTA_DM_PM_ACTTION pref_modes = 0; |
| tBTA_DM_PM_CFG *p_pm_cfg; |
| tBTA_DM_PM_SPEC *p_pm_spec; |
| tBTA_DM_PM_ACTN *p_act0, *p_act1; |
| tBTA_DM_SRVCS *p_srvcs; |
| |
| |
| if(!bta_dm_cb.device_list.count) |
| return; |
| |
| /* see if any attempt to put device in low power mode failed */ |
| p_peer_device = bta_dm_find_peer_device(peer_addr); |
| /* if no peer device found return */ |
| if (p_peer_device == NULL) |
| return; |
| |
| failed_pm = p_peer_device->pm_mode_failed; |
| |
| for(i=0; i<bta_dm_conn_srvcs.count ; i++) |
| { |
| |
| p_srvcs = &bta_dm_conn_srvcs.conn_srvc[i]; |
| if(!bdcmp(p_srvcs->peer_bdaddr, peer_addr)) |
| { |
| |
| /* p_bta_dm_pm_cfg[0].app_id is the number of entries */ |
| for(j=1; j<=p_bta_dm_pm_cfg[0].app_id; j++) |
| { |
| if((p_bta_dm_pm_cfg[j].id == p_srvcs->id) |
| && ((p_bta_dm_pm_cfg[j].app_id == BTA_ALL_APP_ID ) || |
| (p_bta_dm_pm_cfg[j].app_id == p_srvcs->app_id))) |
| break; |
| } |
| |
| p_pm_cfg = &p_bta_dm_pm_cfg[j]; |
| p_pm_spec = &p_bta_dm_pm_spec[p_pm_cfg->spec_idx]; |
| p_act0 = &p_pm_spec->actn_tbl[p_srvcs->state][0]; |
| p_act1 = &p_pm_spec->actn_tbl[p_srvcs->state][1]; |
| |
| APPL_TRACE_DEBUG("bta_dm_pm_set_mode: srvcsid: %d, state: %d, j: %d", p_srvcs->id, p_srvcs->state, j); |
| allowed_modes |= p_pm_spec->allow_mask; |
| |
| /* PM actions are in the order of strictness */ |
| |
| /* first check if the first preference is ok */ |
| if(!(failed_pm & p_act0->power_mode)) |
| { |
| pref_modes |= p_act0->power_mode; |
| |
| if(p_act0->power_mode > pm_action) |
| { |
| pm_action = p_act0->power_mode; |
| timeout = p_act0->timeout; |
| |
| } |
| } |
| /* if first preference has already failed, try second preference */ |
| else if(!(failed_pm & p_act1->power_mode)) |
| { |
| pref_modes |= p_act1->power_mode; |
| |
| if(p_act1->power_mode > pm_action) |
| { |
| pm_action = p_act1->power_mode; |
| timeout = p_act1->timeout; |
| |
| } |
| } |
| } |
| } |
| |
| if(pm_action & (BTA_DM_PM_PARK | BTA_DM_PM_SNIFF)) |
| { |
| |
| /* some service don't like the mode */ |
| if(!(allowed_modes & pm_action)) |
| { |
| |
| /* select the other mode if its allowed and preferred, otherwise 0 which is BTA_DM_PM_NO_ACTION */ |
| pm_action = (allowed_modes & (BTA_DM_PM_PARK | BTA_DM_PM_SNIFF) & pref_modes); |
| |
| /* no timeout needed if no action is required */ |
| if(pm_action == BTA_DM_PM_NO_ACTION) |
| { |
| timeout = 0; |
| } |
| |
| } |
| |
| |
| } |
| |
| if(!timed_out && timeout) |
| { |
| |
| for(i=0; i<BTA_DM_NUM_PM_TIMER; i++) |
| { |
| |
| if(!bta_dm_cb.pm_timer[i].in_use) |
| { |
| bta_dm_cb.pm_timer[i].in_use = TRUE; |
| bdcpy(bta_dm_cb.pm_timer[i].peer_bdaddr, peer_addr); |
| bta_dm_cb.pm_timer[i].timer.p_cback = bta_dm_pm_timer_cback; |
| bta_sys_start_timer(&bta_dm_cb.pm_timer[i].timer, 0, timeout); |
| APPL_TRACE_DEBUG("start dm_pm_timer:%d, %d", i, timeout); |
| return; |
| |
| } |
| |
| } |
| |
| /* no more timers */ |
| if(i==BTA_DM_NUM_PM_TIMER) |
| { |
| APPL_TRACE_WARNING("bta_dm_act dm_pm_timer no more"); |
| return; |
| } |
| } |
| |
| if(pm_action == BTA_DM_PM_NO_ACTION) |
| { |
| |
| |
| } |
| else if(pm_action == BTA_DM_PM_PARK) |
| { |
| p_peer_device->pm_mode_attempted = BTA_DM_PM_PARK; |
| bta_dm_pm_park(peer_addr); |
| |
| } |
| else if(pm_action & BTA_DM_PM_SNIFF) |
| { |
| /* dont initiate SNIFF, if link_policy has it disabled */ |
| if (p_peer_device->link_policy & HCI_ENABLE_SNIFF_MODE) |
| { |
| p_peer_device->pm_mode_attempted = BTA_DM_PM_SNIFF; |
| bta_dm_pm_sniff(p_peer_device, (UINT8)(pm_action & 0x0F) ); |
| } |
| else |
| { |
| APPL_TRACE_DEBUG("bta_dm_pm_set_mode: Link policy disallows SNIFF, ignore request"); |
| } |
| } |
| else if(pm_action == BTA_DM_PM_ACTIVE) |
| { |
| |
| bta_dm_pm_active(peer_addr); |
| |
| } |
| |
| |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_pm_park |
| ** |
| ** Description Switch to park mode. |
| ** |
| ** |
| ** Returns TRUE if park attempted, FALSE otherwise. |
| ** |
| *******************************************************************************/ |
| static BOOLEAN bta_dm_pm_park(BD_ADDR peer_addr) |
| { |
| |
| tBTM_PM_MODE mode = BTM_PM_STS_ACTIVE; |
| |
| /* if not in park mode, switch to park */ |
| BTM_ReadPowerMode(peer_addr, &mode); |
| |
| if(mode != BTM_PM_MD_PARK) |
| { |
| BTM_SetPowerMode (bta_dm_cb.pm_id, peer_addr, &p_bta_dm_pm_md[BTA_DM_PM_PARK_IDX]); |
| } |
| return TRUE; |
| |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_pm_sniff |
| ** |
| ** Description Switch to sniff mode. |
| ** |
| ** |
| ** Returns TRUE if sniff attempted, FALSE otherwise. |
| ** |
| *******************************************************************************/ |
| static BOOLEAN bta_dm_pm_sniff(tBTA_DM_PEER_DEVICE *p_peer_dev, UINT8 index) |
| { |
| tBTM_PM_MODE mode = BTM_PM_STS_ACTIVE; |
| tBTM_PM_PWR_MD pwr_md; |
| tBTM_STATUS status; |
| |
| BTM_ReadPowerMode(p_peer_dev->peer_bdaddr, &mode); |
| |
| #if (BTM_SSR_INCLUDED == TRUE) |
| APPL_TRACE_DEBUG("bta_dm_pm_sniff cur:%d, idx:%d, info:x%x", mode, index, p_peer_dev->info); |
| if (mode != BTM_PM_MD_SNIFF || |
| (HCI_SNIFF_SUB_RATE_SUPPORTED(BTM_ReadLocalFeatures ()) && |
| HCI_SNIFF_SUB_RATE_SUPPORTED(BTM_ReadRemoteFeatures (p_peer_dev->peer_bdaddr)) && |
| !(p_peer_dev->info & BTA_DM_DI_USE_SSR))) |
| #else |
| APPL_TRACE_DEBUG("bta_dm_pm_sniff cur:%d, idx:%d", mode, index); |
| if(mode != BTM_PM_MD_SNIFF) |
| #endif |
| { |
| /* if the current mode is not sniff, issue the sniff command. |
| * If sniff, but SSR is not used in this link, still issue the command */ |
| memcpy(&pwr_md, &p_bta_dm_pm_md[index], sizeof (tBTM_PM_PWR_MD)); |
| if (p_peer_dev->info & BTA_DM_DI_INT_SNIFF) |
| { |
| pwr_md.mode |= BTM_PM_MD_FORCE; |
| } |
| status = BTM_SetPowerMode (bta_dm_cb.pm_id, p_peer_dev->peer_bdaddr, &pwr_md); |
| if (status == BTM_CMD_STORED|| status == BTM_CMD_STARTED) |
| { |
| p_peer_dev->info &= ~(BTA_DM_DI_INT_SNIFF|BTA_DM_DI_ACP_SNIFF); |
| p_peer_dev->info |= BTA_DM_DI_SET_SNIFF; |
| } |
| else if (status == BTM_SUCCESS) |
| { |
| APPL_TRACE_DEBUG("bta_dm_pm_sniff BTM_SetPowerMode() returns BTM_SUCCESS"); |
| p_peer_dev->info &= ~(BTA_DM_DI_INT_SNIFF|BTA_DM_DI_ACP_SNIFF|BTA_DM_DI_SET_SNIFF); |
| } |
| else /* error */ |
| { |
| APPL_TRACE_ERROR("bta_dm_pm_sniff BTM_SetPowerMode() returns ERROR status=%d", status); |
| p_peer_dev->info &= ~(BTA_DM_DI_INT_SNIFF|BTA_DM_DI_ACP_SNIFF|BTA_DM_DI_SET_SNIFF); |
| } |
| } |
| /* else already in sniff and is using SSR, do nothing */ |
| |
| return TRUE; |
| |
| } |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_ssr |
| ** |
| ** Description checks and sends SSR parameters |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| static void bta_dm_pm_ssr(BD_ADDR peer_addr) |
| { |
| tBTA_DM_SSR_SPEC *p_spec, *p_spec_cur; |
| UINT8 i,j; |
| int ssr = BTA_DM_PM_SSR0; |
| |
| /* go through the connected services */ |
| for(i=0; i<bta_dm_conn_srvcs.count ; i++) |
| { |
| if(!bdcmp(bta_dm_conn_srvcs.conn_srvc[i].peer_bdaddr, peer_addr)) |
| { |
| /* p_bta_dm_pm_cfg[0].app_id is the number of entries */ |
| for(j=1; j<=p_bta_dm_pm_cfg[0].app_id; j++) |
| { |
| /* find the associated p_bta_dm_pm_cfg */ |
| if((p_bta_dm_pm_cfg[j].id == bta_dm_conn_srvcs.conn_srvc[i].id) |
| && ((p_bta_dm_pm_cfg[j].app_id == BTA_ALL_APP_ID ) |
| || (p_bta_dm_pm_cfg[j].app_id == bta_dm_conn_srvcs.conn_srvc[i].app_id))) |
| { |
| APPL_TRACE_WARNING("bta_dm_pm_ssr conn_srvc id:%d, app_id:%d", |
| bta_dm_conn_srvcs.conn_srvc[i].id, bta_dm_conn_srvcs.conn_srvc[i].app_id); |
| break; |
| } |
| } |
| |
| /* find the ssr index with the smallest max latency. */ |
| p_spec_cur = &p_bta_dm_ssr_spec[p_bta_dm_pm_spec[p_bta_dm_pm_cfg[j].spec_idx].ssr]; |
| p_spec = &p_bta_dm_ssr_spec[ssr]; |
| |
| #if (defined BTA_HH_INCLUDED && BTA_HH_INCLUDED == TRUE) |
| /* HH has the per connection SSR preference, already read the SSR params from BTA HH */ |
| if (p_bta_dm_pm_spec[p_bta_dm_pm_cfg[j].spec_idx].ssr == BTA_DM_PM_SSR_HH) |
| { |
| if (bta_hh_read_ssr_param(peer_addr, &p_spec_cur->max_lat, &p_spec_cur->min_rmt_to) == BTA_HH_ERR) |
| continue; |
| } |
| #endif |
| if (p_spec_cur->max_lat < p_spec->max_lat || |
| (ssr == BTA_DM_PM_SSR0 && p_bta_dm_pm_spec[p_bta_dm_pm_cfg[j].spec_idx].ssr != BTA_DM_PM_SSR0)) |
| { |
| ssr = p_bta_dm_pm_spec[p_bta_dm_pm_cfg[j].spec_idx].ssr; |
| } |
| |
| } |
| } |
| |
| p_spec = &p_bta_dm_ssr_spec[ssr]; |
| APPL_TRACE_WARNING("bta_dm_pm_ssr:%d, lat:%d", ssr, p_spec->max_lat); |
| if(p_spec->max_lat) |
| { |
| /* set the SSR parameters. */ |
| BTM_SetSsrParams (peer_addr, p_spec->max_lat, |
| p_spec->min_rmt_to, p_spec->min_loc_to); |
| } |
| } |
| #endif |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_active |
| ** |
| ** Description Brings connection to active mode |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_dm_pm_active(BD_ADDR peer_addr) |
| { |
| tBTM_PM_PWR_MD pm; |
| |
| memset( (void*)&pm, 0, sizeof(pm)); |
| |
| /* switch to active mode */ |
| pm.mode = BTM_PM_MD_ACTIVE; |
| BTM_SetPowerMode (bta_dm_cb.pm_id, peer_addr, &pm); |
| |
| |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_btm_cback |
| ** |
| ** Description BTM power manager callback. |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_dm_pm_btm_cback(BD_ADDR bd_addr, tBTM_PM_STATUS status, UINT16 value, UINT8 hci_status) |
| { |
| tBTA_DM_PM_BTM_STATUS *p_buf; |
| |
| if ((p_buf = (tBTA_DM_PM_BTM_STATUS *) GKI_getbuf(sizeof(tBTA_DM_PM_BTM_STATUS))) != NULL) |
| { |
| p_buf->hdr.event = BTA_DM_PM_BTM_STATUS_EVT; |
| p_buf->status = status; |
| p_buf->value = value; |
| p_buf->hci_status = hci_status; |
| bdcpy(p_buf->bd_addr, bd_addr); |
| bta_sys_sendmsg(p_buf); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_timer_cback |
| ** |
| ** Description Power management timer callback. |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_dm_pm_timer_cback(void *p_tle) |
| { |
| tBTA_DM_PM_TIMER *p_buf; |
| UINT8 i; |
| |
| APPL_TRACE_WARNING("dm_pm_timer expires"); |
| |
| for(i=0; i<BTA_DM_NUM_PM_TIMER; i++) |
| { |
| |
| if(bta_dm_cb.pm_timer[i].in_use) |
| { |
| |
| if(&bta_dm_cb.pm_timer[i].timer == (TIMER_LIST_ENT*) p_tle) |
| { |
| APPL_TRACE_WARNING("dm_pm_timer expires %d", i); |
| bta_dm_cb.pm_timer[i].in_use = FALSE; |
| break; |
| } |
| |
| } |
| |
| } |
| |
| |
| /* no more timers */ |
| if(i==BTA_DM_NUM_PM_TIMER) |
| { |
| return; |
| } |
| |
| if ((p_buf = (tBTA_DM_PM_TIMER *) GKI_getbuf(sizeof(tBTA_DM_PM_TIMER))) != NULL) |
| { |
| p_buf->hdr.event = BTA_DM_PM_TIMER_EVT; |
| bdcpy(p_buf->bd_addr, bta_dm_cb.pm_timer[i].peer_bdaddr); |
| bta_sys_sendmsg(p_buf); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_btm_status |
| ** |
| ** Description Process pm status event from btm |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_dm_pm_btm_status(tBTA_DM_MSG *p_data) |
| { |
| |
| tBTA_DM_PEER_DEVICE *p_dev; |
| tBTA_DM_DEV_INFO info; |
| |
| APPL_TRACE_DEBUG("bta_dm_pm_btm_status:%d", p_data->pm_status.status); |
| p_dev = bta_dm_find_peer_device(p_data->pm_status.bd_addr); |
| if(NULL == p_dev) |
| return; |
| |
| info = p_dev->info; |
| /* check new mode */ |
| switch (p_data->pm_status.status) |
| { |
| case BTM_PM_STS_ACTIVE: |
| /* if our sniff or park attempt failed |
| we should not try it again*/ |
| if (p_data->pm_status.hci_status != 0) |
| { |
| APPL_TRACE_ERROR("bta_dm_pm_btm_status hci_status=%d", p_data->pm_status.hci_status); |
| p_dev->info &= ~(BTA_DM_DI_INT_SNIFF|BTA_DM_DI_ACP_SNIFF|BTA_DM_DI_SET_SNIFF); |
| |
| if(p_dev->pm_mode_attempted &(BTA_DM_PM_PARK | BTA_DM_PM_SNIFF)) |
| { |
| p_dev->pm_mode_failed |
| |= ((BTA_DM_PM_PARK | BTA_DM_PM_SNIFF) & p_dev->pm_mode_attempted); |
| bta_dm_pm_stop_timer(p_data->pm_status.bd_addr); |
| bta_dm_pm_set_mode(p_data->pm_status.bd_addr, FALSE); |
| } |
| } |
| else |
| { |
| #if (BTM_SSR_INCLUDED == TRUE) |
| if(p_dev->prev_low) |
| { |
| /* need to send the SSR paramaters to controller again */ |
| bta_dm_pm_ssr(p_dev->peer_bdaddr); |
| } |
| p_dev->prev_low = BTM_PM_STS_ACTIVE; |
| #endif |
| bta_dm_pm_stop_timer(p_data->pm_status.bd_addr); |
| bta_dm_pm_set_mode(p_data->pm_status.bd_addr, FALSE); |
| } |
| break; |
| |
| #if (BTM_SSR_INCLUDED == TRUE) |
| case BTM_PM_STS_PARK: |
| case BTM_PM_STS_HOLD: |
| /* save the previous low power mode - for SSR. |
| * SSR parameters are sent to controller on "conn open". |
| * the numbers stay good until park/hold/detach */ |
| if(p_dev->info & BTA_DM_DI_USE_SSR) |
| p_dev->prev_low = p_data->pm_status.status; |
| break; |
| |
| case BTM_PM_STS_SSR: |
| if(p_data->pm_status.value) |
| p_dev->info |= BTA_DM_DI_USE_SSR; |
| else |
| p_dev->info &= ~BTA_DM_DI_USE_SSR; |
| break; |
| #endif |
| case BTM_PM_STS_SNIFF: |
| if (p_data->pm_status.hci_status == 0) |
| { |
| /* Stop PM timer now if already active for |
| * particular device since link is already |
| * put in sniff mode by remote device, and |
| * PM timer sole purpose is to put the link |
| * in sniff mode from host side. |
| */ |
| bta_dm_pm_stop_timer(p_data->pm_status.bd_addr); |
| } |
| p_dev->info &= ~(BTA_DM_DI_SET_SNIFF|BTA_DM_DI_INT_SNIFF|BTA_DM_DI_ACP_SNIFF); |
| if (info & BTA_DM_DI_SET_SNIFF) |
| p_dev->info |= BTA_DM_DI_INT_SNIFF; |
| else |
| p_dev->info |= BTA_DM_DI_ACP_SNIFF; |
| break; |
| |
| case BTM_PM_STS_ERROR: |
| p_dev->info &= ~BTA_DM_DI_SET_SNIFF; |
| break; |
| |
| default: |
| break; |
| } |
| |
| |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_timer |
| ** |
| ** Description Process pm timer event from btm |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_dm_pm_timer(tBTA_DM_MSG *p_data) |
| { |
| |
| APPL_TRACE_WARNING("proc dm_pm_timer expires"); |
| bta_dm_pm_set_mode(p_data->pm_status.bd_addr, TRUE); |
| |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_find_peer_device |
| ** |
| ** Description Given an address, find the associated control block. |
| ** |
| ** Returns tBTA_DM_PEER_DEVICE |
| ** |
| *******************************************************************************/ |
| tBTA_DM_PEER_DEVICE * bta_dm_find_peer_device(BD_ADDR peer_addr) |
| { |
| tBTA_DM_PEER_DEVICE *p_dev = NULL; |
| int i; |
| |
| for(i=0; i<bta_dm_cb.device_list.count; i++) |
| { |
| if(!bdcmp( bta_dm_cb.device_list.peer_device[i].peer_bdaddr, peer_addr)) |
| { |
| p_dev = &bta_dm_cb.device_list.peer_device[i]; |
| break; |
| } |
| |
| } |
| return p_dev; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_is_sco_active |
| ** |
| ** Description Loop through connected services for HFP+State=SCO |
| ** |
| ** Returns BOOLEAN. TRUE if SCO active, else FALSE |
| ** |
| *******************************************************************************/ |
| static BOOLEAN bta_dm_pm_is_sco_active () |
| { |
| int j; |
| BOOLEAN bScoActive = FALSE; |
| |
| for(j=0; j<bta_dm_conn_srvcs.count ; j++) |
| { |
| /* check if an entry already present */ |
| if ( (bta_dm_conn_srvcs.conn_srvc[j].id == BTA_ID_AG ) && (bta_dm_conn_srvcs.conn_srvc[j].state == BTA_SYS_SCO_OPEN) ) |
| { |
| bScoActive = TRUE; |
| break; |
| } |
| } |
| |
| APPL_TRACE_DEBUG("bta_dm_is_sco_active: SCO active: %d", bScoActive); |
| return bScoActive; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_hid_check |
| ** |
| ** Description Disables/Enables sniff in link policy based on SCO Up/Down |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| |
| static void bta_dm_pm_hid_check(BOOLEAN bScoActive) |
| { |
| int j; |
| |
| /* if HID is active, disable the link policy */ |
| for(j=0; j<bta_dm_conn_srvcs.count ; j++) |
| { |
| /* check if an entry already present */ |
| if(bta_dm_conn_srvcs.conn_srvc[j].id == BTA_ID_HH ) |
| { |
| APPL_TRACE_DEBUG ("SCO status change(Active: %d), modify HID link policy. state: %d", |
| bScoActive, bta_dm_conn_srvcs.conn_srvc[j].state); |
| bta_dm_pm_set_sniff_policy( bta_dm_find_peer_device(bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr), bScoActive); |
| |
| /* if we had disabled link policy, seems like the hid device stop retrying SNIFF after a few tries. force sniff if needed */ |
| if (!bScoActive) |
| bta_dm_pm_set_mode(bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr, FALSE); |
| } |
| } |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_set_sniff_policy |
| ** |
| ** Description Disables/Enables sniff in link policy for the give device |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| static void bta_dm_pm_set_sniff_policy(tBTA_DM_PEER_DEVICE *p_dev, BOOLEAN bDisable) |
| { |
| UINT16 policy_setting; |
| |
| if (!p_dev) |
| return; |
| |
| if (bDisable) |
| { |
| policy_setting = bta_dm_cb.cur_policy & |
| (HCI_ENABLE_MASTER_SLAVE_SWITCH | |
| HCI_ENABLE_HOLD_MODE | |
| HCI_ENABLE_PARK_MODE); |
| |
| } |
| else |
| { |
| /* allow sniff after sco is closed */ |
| policy_setting= bta_dm_cb.cur_policy; |
| } |
| |
| /* if disabling SNIFF, make sure link is Active */ |
| if (bDisable) |
| bta_dm_pm_active(p_dev->peer_bdaddr); |
| |
| /* update device record and set link policy */ |
| p_dev->link_policy = policy_setting; |
| BTM_SetLinkPolicy(p_dev->peer_bdaddr, &policy_setting); |
| |
| } |
| |
| #if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_pm_obtain_controller_state |
| ** |
| ** Description This function obtains the consolidated controller power state |
| ** |
| ** Parameters: |
| ** |
| *******************************************************************************/ |
| tBTA_DM_CONTRL_STATE bta_dm_pm_obtain_controller_state(void) |
| { |
| /* Did not use counts as it is not sure, how accurate the count values are in |
| ** bta_dm_cb.device_list.count > 0 || bta_dm_cb.device_list.le_count > 0 */ |
| |
| tBTA_DM_CONTRL_STATE cur_state = BTA_DM_CONTRL_UNKNOWN; |
| cur_state = BTM_PM_ReadControllerState(); |
| |
| APPL_TRACE_DEBUG("bta_dm_pm_obtain_controller_state: %d", cur_state); |
| return cur_state; |
| } |
| #endif |
