blob: e2cff2855ed5edfc1776e9b45a9adfe8c9b4fa18 [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/*****************************************************************************
*
* This file contains collection of utility functions used the RFCOMM unit
*
*****************************************************************************/
#include "bt_target.h"
#include "gki.h"
#include "btm_api.h"
#include "btm_int.h"
#include "rfcdefs.h"
#include "port_api.h"
#include "port_ext.h"
#include "port_int.h"
#include "rfc_int.h"
#include "btu.h"
#include "bt_utils.h"
#include <string.h>
/*******************************************************************************
**
** Function rfc_calc_fcs
**
** Description Reversed CRC Table , 8-bit, poly=0x07
** (GSM 07.10 TS 101 369 V6.3.0)
*******************************************************************************/
static const UINT8 rfc_crctable[] =
{
0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69, 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51, 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19, 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95, 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD, 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5, 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD, 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
};
/*******************************************************************************
**
** Function rfc_calc_fcs
**
** Description This function calculate FCS for the RFCOMM frame
** (GSM 07.10 TS 101 369 V6.3.0)
**
** Input len - number of bytes in the message
** p - points to message
**
*******************************************************************************/
UINT8 rfc_calc_fcs (UINT16 len, UINT8 *p)
{
UINT8 fcs = 0xFF;
while (len--)
{
fcs = rfc_crctable[fcs ^ *p++];
}
/* Ones compliment */
return (0xFF - fcs);
}
/*******************************************************************************
**
** Function rfc_check_fcs
**
** Description This function checks FCS for the RFCOMM frame
** (GSM 07.10 TS 101 369 V6.3.0)
**
** Input len - number of bytes in the message
** p - points to message
** received_fcs - received FCS
**
*******************************************************************************/
BOOLEAN rfc_check_fcs (UINT16 len, UINT8 *p, UINT8 received_fcs)
{
UINT8 fcs = 0xFF;
while (len--)
{
fcs = rfc_crctable[fcs ^ *p++];
}
/* Ones compliment */
fcs = rfc_crctable[fcs ^ received_fcs];
/*0xCF is the reversed order of 11110011.*/
return (fcs == 0xCF);
}
/*******************************************************************************
**
** Function rfc_alloc_multiplexer_channel
**
** Description This function returns existing or new control block for
** the BD_ADDR.
**
*******************************************************************************/
tRFC_MCB *rfc_alloc_multiplexer_channel (BD_ADDR bd_addr, BOOLEAN is_initiator)
{
int i, j;
tRFC_MCB *p_mcb = NULL;
RFCOMM_TRACE_DEBUG("rfc_alloc_multiplexer_channel: bd_addr:%02x:%02x:%02x:%02x:%02x:%02x",
bd_addr[0], bd_addr[1], bd_addr[2], bd_addr[3], bd_addr[4], bd_addr[5]);
RFCOMM_TRACE_DEBUG("rfc_alloc_multiplexer_channel:is_initiator:%d", is_initiator);
for (i = 0; i < MAX_BD_CONNECTIONS; i++)
{
RFCOMM_TRACE_DEBUG("rfc_alloc_multiplexer_channel rfc_cb.port.rfc_mcb[%d].state:%d",
i, rfc_cb.port.rfc_mcb[i].state);
RFCOMM_TRACE_DEBUG("(rfc_cb.port.rfc_mcb[i].bd_addr:%02x:%02x:%02x:%02x:%02x:%02x",
rfc_cb.port.rfc_mcb[i].bd_addr[0], rfc_cb.port.rfc_mcb[i].bd_addr[1],
rfc_cb.port.rfc_mcb[i].bd_addr[2], rfc_cb.port.rfc_mcb[i].bd_addr[3],
rfc_cb.port.rfc_mcb[i].bd_addr[4], rfc_cb.port.rfc_mcb[i].bd_addr[5]);
if ((rfc_cb.port.rfc_mcb[i].state != RFC_MX_STATE_IDLE)
&& (!memcmp (rfc_cb.port.rfc_mcb[i].bd_addr, bd_addr, BD_ADDR_LEN)))
{
/* Multiplexer channel found do not change anything */
/* If there was an inactivity timer running stop it now */
if (rfc_cb.port.rfc_mcb[i].state == RFC_MX_STATE_CONNECTED)
rfc_timer_stop (&rfc_cb.port.rfc_mcb[i]);
RFCOMM_TRACE_DEBUG("rfc_alloc_multiplexer_channel:is_initiator:%d, found, state:%d, p_mcb:%p",
is_initiator, rfc_cb.port.rfc_mcb[i].state, &rfc_cb.port.rfc_mcb[i]);
return (&rfc_cb.port.rfc_mcb[i]);
}
}
/* connection with bd_addr does not exist */
for (i = 0, j = rfc_cb.rfc.last_mux + 1; i < MAX_BD_CONNECTIONS; i++, j++)
{
if (j >= MAX_BD_CONNECTIONS)
j = 0;
p_mcb = &rfc_cb.port.rfc_mcb[j];
if (rfc_cb.port.rfc_mcb[j].state == RFC_MX_STATE_IDLE)
{
/* New multiplexer control block */
memset (p_mcb, 0, sizeof (tRFC_MCB));
memcpy (p_mcb->bd_addr, bd_addr, BD_ADDR_LEN);
RFCOMM_TRACE_DEBUG("rfc_alloc_multiplexer_channel:is_initiator:%d, create new p_mcb:%p, index:%d",
is_initiator, &rfc_cb.port.rfc_mcb[j], j);
GKI_init_q(&p_mcb->cmd_q);
p_mcb->is_initiator = is_initiator;
rfc_timer_start (p_mcb, RFC_MCB_INIT_INACT_TIMER);
rfc_cb.rfc.last_mux = (UINT8) j;
return (p_mcb);
}
}
return (NULL);
}
/*******************************************************************************
**
** Function rfc_release_multiplexer_channel
**
** Description This function returns existing or new control block for
** the BD_ADDR.
**
*******************************************************************************/
void rfc_release_multiplexer_channel (tRFC_MCB *p_mcb)
{
void *p_buf;
rfc_timer_stop (p_mcb);
while ((p_buf = GKI_dequeue(&p_mcb->cmd_q)) != NULL)
GKI_freebuf(p_buf);
memset (p_mcb, 0, sizeof (tRFC_MCB));
p_mcb->state = RFC_MX_STATE_IDLE;
}
/*******************************************************************************
**
** Function rfc_timer_start
**
** Description Start RFC Timer
**
*******************************************************************************/
void rfc_timer_start (tRFC_MCB *p_mcb, UINT16 timeout)
{
TIMER_LIST_ENT *p_tle = &p_mcb->tle;
RFCOMM_TRACE_EVENT ("rfc_timer_start - timeout:%d", timeout);
p_tle->param = (UINT32)p_mcb;
btu_start_timer (p_tle, BTU_TTYPE_RFCOMM_MFC, timeout);
}
/*******************************************************************************
**
** Function rfc_timer_stop
**
** Description Stop RFC Timer
**
*******************************************************************************/
void rfc_timer_stop (tRFC_MCB *p_mcb)
{
RFCOMM_TRACE_EVENT ("rfc_timer_stop");
btu_stop_timer (&p_mcb->tle);
}
/*******************************************************************************
**
** Function rfc_port_timer_start
**
** Description Start RFC Timer
**
*******************************************************************************/
void rfc_port_timer_start (tPORT *p_port, UINT16 timeout)
{
TIMER_LIST_ENT *p_tle = &p_port->rfc.tle;
RFCOMM_TRACE_EVENT ("rfc_port_timer_start - timeout:%d", timeout);
p_tle->param = (UINT32)p_port;
btu_start_timer (p_tle, BTU_TTYPE_RFCOMM_PORT, timeout);
}
/*******************************************************************************
**
** Function rfc_port_timer_stop
**
** Description Stop RFC Timer
**
*******************************************************************************/
void rfc_port_timer_stop (tPORT *p_port)
{
RFCOMM_TRACE_EVENT ("rfc_port_timer_stop");
btu_stop_timer (&p_port->rfc.tle);
}
/*******************************************************************************
**
** Function rfc_check_mcb_active
**
** Description Check if there are any opened ports on the MCB if not
** start MCB Inact timer.
**
** Returns void
**
*******************************************************************************/
void rfc_check_mcb_active (tRFC_MCB *p_mcb)
{
UINT16 i;
for (i = 0; i < RFCOMM_MAX_DLCI; i++)
{
if (p_mcb->port_inx[i] != 0)
{
p_mcb->is_disc_initiator = FALSE;
return;
}
}
/* The last port was DISCed. On the client side start disconnecting Mx */
/* On the server side start inactivity timer */
if (p_mcb->is_disc_initiator)
{
p_mcb->is_disc_initiator = FALSE;
rfc_mx_sm_execute (p_mcb, RFC_MX_EVENT_CLOSE_REQ, NULL);
}
else
rfc_timer_start (p_mcb, RFC_MCB_RELEASE_INACT_TIMER);
}
/*******************************************************************************
**
** Function rfcomm_process_timeout
**
** Description The function called every second to check RFCOMM timers
**
** Returns void
**
*******************************************************************************/
void rfcomm_process_timeout (TIMER_LIST_ENT *p_tle)
{
switch (p_tle->event)
{
case BTU_TTYPE_RFCOMM_MFC:
rfc_mx_sm_execute ((tRFC_MCB *)p_tle->param, RFC_EVENT_TIMEOUT, NULL);
break;
case BTU_TTYPE_RFCOMM_PORT:
rfc_port_sm_execute ((tPORT *)p_tle->param, RFC_EVENT_TIMEOUT, NULL);
break;
default:
break;
}
}
/*******************************************************************************
**
** Function rfc_sec_check_complete
**
** Description The function called when Security Manager finishes
** verification of the service side connection
**
** Returns void
**
*******************************************************************************/
void rfc_sec_check_complete (BD_ADDR bd_addr, tBT_TRANSPORT transport, void *p_ref_data, UINT8 res)
{
tPORT *p_port = (tPORT *)p_ref_data;
UNUSED(bd_addr);
UNUSED(transport);
/* Verify that PORT is still waiting for Security to complete */
if (!p_port->in_use
|| ((p_port->rfc.state != RFC_STATE_ORIG_WAIT_SEC_CHECK)
&& (p_port->rfc.state != RFC_STATE_TERM_WAIT_SEC_CHECK)))
return;
rfc_port_sm_execute ((tPORT *)p_ref_data, RFC_EVENT_SEC_COMPLETE, &res);
}
/*******************************************************************************
**
** Function rfc_port_closed
**
** Description The function is called when port is released based on the
** event received from the lower layer, typically L2CAP
** connection down, DISC, or DM frame.
**
** Returns void
**
*******************************************************************************/
void rfc_port_closed (tPORT *p_port)
{
tRFC_MCB *p_mcb = p_port->rfc.p_mcb;
RFCOMM_TRACE_DEBUG ("rfc_port_closed");
rfc_port_timer_stop (p_port);
p_port->rfc.state = RFC_STATE_CLOSED;
/* If multiplexer channel was up mark it as down */
if (p_mcb)
{
p_mcb->port_inx[p_port->dlci] = 0;
/* If there are no more ports opened on this MCB release it */
rfc_check_mcb_active (p_mcb);
}
/* Notify port that RFC connection is gone */
port_rfc_closed (p_port, PORT_CLOSED);
}
/*******************************************************************************
**
** Function rfc_inc_credit
**
** Description The function is called when a credit is received in a UIH
** frame. It increments the TX credit count, and if data
** flow had halted, it restarts it.
**
** Returns void
**
*******************************************************************************/
void rfc_inc_credit (tPORT *p_port, UINT8 credit)
{
if (p_port->rfc.p_mcb->flow == PORT_FC_CREDIT)
{
p_port->credit_tx += credit;
RFCOMM_TRACE_EVENT ("rfc_inc_credit:%d", p_port->credit_tx);
if (p_port->tx.peer_fc == TRUE)
PORT_FlowInd(p_port->rfc.p_mcb, p_port->dlci, TRUE);
}
}
/*******************************************************************************
**
** Function rfc_dec_credit
**
** Description The function is called when a UIH frame of user data is
** sent. It decrements the credit count. If credit count
** Reaches zero, peer_fc is set.
**
** Returns void
**
*******************************************************************************/
void rfc_dec_credit (tPORT *p_port)
{
if (p_port->rfc.p_mcb->flow == PORT_FC_CREDIT)
{
if (p_port->credit_tx > 0)
p_port->credit_tx--;
if (p_port->credit_tx == 0)
p_port->tx.peer_fc = TRUE;
}
}
/*******************************************************************************
**
** Function rfc_check_send_cmd
**
** Description This function is called to send an RFCOMM command message
** or to handle the RFCOMM command message queue.
**
** Returns void
**
*******************************************************************************/
void rfc_check_send_cmd(tRFC_MCB *p_mcb, BT_HDR *p_buf)
{
BT_HDR *p;
/* if passed a buffer queue it */
if (p_buf != NULL)
{
GKI_enqueue(&p_mcb->cmd_q, p_buf);
}
/* handle queue if L2CAP not congested */
while (p_mcb->l2cap_congested == FALSE)
{
if ((p = (BT_HDR *) GKI_dequeue(&p_mcb->cmd_q)) == NULL)
{
break;
}
L2CA_DataWrite (p_mcb->lcid, p);
}
}