| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains L2CAP internal definitions |
| * |
| ******************************************************************************/ |
| #ifndef L2C_INT_H |
| #define L2C_INT_H |
| |
| #include "l2c_api.h" |
| #include "l2cdefs.h" |
| #include "gki.h" |
| #include "btm_api.h" |
| |
| #define L2CAP_MIN_MTU 48 /* Minimum acceptable MTU is 48 bytes */ |
| |
| /* Timeouts. Since L2CAP works off a 1-second list, all are in seconds. |
| */ |
| #define L2CAP_LINK_ROLE_SWITCH_TOUT 10 /* 10 seconds */ |
| #define L2CAP_LINK_CONNECT_TOUT 60 /* 30 seconds */ |
| #define L2CAP_LINK_CONNECT_TOUT_EXT 120 /* 120 seconds */ |
| #define L2CAP_ECHO_RSP_TOUT 30 /* 30 seconds */ |
| #define L2CAP_LINK_FLOW_CONTROL_TOUT 2 /* 2 seconds */ |
| #define L2CAP_LINK_DISCONNECT_TOUT 30 /* 30 seconds */ |
| |
| #ifndef L2CAP_CHNL_CONNECT_TOUT /* BTIF needs to override for internal project needs */ |
| #define L2CAP_CHNL_CONNECT_TOUT 60 /* 60 seconds */ |
| #endif |
| |
| #define L2CAP_CHNL_CONNECT_TOUT_EXT 120 /* 120 seconds */ |
| #define L2CAP_CHNL_CFG_TIMEOUT 30 /* 30 seconds */ |
| #define L2CAP_CHNL_DISCONNECT_TOUT 10 /* 10 seconds */ |
| #define L2CAP_DELAY_CHECK_SM4 2 /* 2 seconds */ |
| #define L2CAP_WAIT_INFO_RSP_TOUT 3 /* 3 seconds */ |
| #define L2CAP_WAIT_UNPARK_TOUT 2 /* 2 seconds */ |
| #define L2CAP_LINK_INFO_RESP_TOUT 2 /* 2 seconds */ |
| #define L2CAP_BLE_LINK_CONNECT_TOUT 30 /* 30 seconds */ |
| #define L2CAP_BLE_CONN_PARAM_UPD_TOUT 30 /* 30 seconds */ |
| |
| /* quick timer uses millisecond unit */ |
| #define L2CAP_DEFAULT_RETRANS_TOUT 2000 /* 2000 milliseconds */ |
| #define L2CAP_DEFAULT_MONITOR_TOUT 12000 /* 12000 milliseconds */ |
| #define L2CAP_FCR_ACK_TOUT 200 /* 200 milliseconds */ |
| |
| /* Define the possible L2CAP channel states. The names of |
| ** the states may seem a bit strange, but they are taken from |
| ** the Bluetooth specification. |
| */ |
| typedef enum |
| { |
| CST_CLOSED, /* Channel is in clodes state */ |
| CST_ORIG_W4_SEC_COMP, /* Originator waits security clearence */ |
| CST_TERM_W4_SEC_COMP, /* Acceptor waits security clearence */ |
| CST_W4_L2CAP_CONNECT_RSP, /* Waiting for peer conenct response */ |
| CST_W4_L2CA_CONNECT_RSP, /* Waiting for upper layer connect rsp */ |
| CST_CONFIG, /* Negotiating configuration */ |
| CST_OPEN, /* Data transfer state */ |
| CST_W4_L2CAP_DISCONNECT_RSP, /* Waiting for peer disconnect rsp */ |
| CST_W4_L2CA_DISCONNECT_RSP /* Waiting for upper layer disc rsp */ |
| } tL2C_CHNL_STATE; |
| |
| /* Define the possible L2CAP link states |
| */ |
| typedef enum |
| { |
| LST_DISCONNECTED, |
| LST_CONNECT_HOLDING, |
| LST_CONNECTING_WAIT_SWITCH, |
| LST_CONNECTING, |
| LST_CONNECTED, |
| LST_DISCONNECTING |
| } tL2C_LINK_STATE; |
| |
| |
| |
| /* Define input events to the L2CAP link and channel state machines. The names |
| ** of the events may seem a bit strange, but they are taken from |
| ** the Bluetooth specification. |
| */ |
| #define L2CEVT_LP_CONNECT_CFM 0 /* Lower layer connect confirm */ |
| #define L2CEVT_LP_CONNECT_CFM_NEG 1 /* Lower layer connect confirm (failed) */ |
| #define L2CEVT_LP_CONNECT_IND 2 /* Lower layer connect indication */ |
| #define L2CEVT_LP_DISCONNECT_IND 3 /* Lower layer disconnect indication */ |
| #define L2CEVT_LP_QOS_CFM 4 /* Lower layer QOS confirmation */ |
| #define L2CEVT_LP_QOS_CFM_NEG 5 /* Lower layer QOS confirmation (failed)*/ |
| #define L2CEVT_LP_QOS_VIOLATION_IND 6 /* Lower layer QOS violation indication */ |
| |
| #define L2CEVT_SEC_COMP 7 /* Security cleared successfully */ |
| #define L2CEVT_SEC_COMP_NEG 8 /* Security procedure failed */ |
| |
| #define L2CEVT_L2CAP_CONNECT_REQ 10 /* Peer connection request */ |
| #define L2CEVT_L2CAP_CONNECT_RSP 11 /* Peer connection response */ |
| #define L2CEVT_L2CAP_CONNECT_RSP_PND 12 /* Peer connection response pending */ |
| #define L2CEVT_L2CAP_CONNECT_RSP_NEG 13 /* Peer connection response (failed) */ |
| #define L2CEVT_L2CAP_CONFIG_REQ 14 /* Peer configuration request */ |
| #define L2CEVT_L2CAP_CONFIG_RSP 15 /* Peer configuration response */ |
| #define L2CEVT_L2CAP_CONFIG_RSP_NEG 16 /* Peer configuration response (failed) */ |
| #define L2CEVT_L2CAP_DISCONNECT_REQ 17 /* Peer disconnect request */ |
| #define L2CEVT_L2CAP_DISCONNECT_RSP 18 /* Peer disconnect response */ |
| #define L2CEVT_L2CAP_INFO_RSP 19 /* Peer information response */ |
| #define L2CEVT_L2CAP_DATA 20 /* Peer data */ |
| |
| #define L2CEVT_L2CA_CONNECT_REQ 21 /* Upper layer connect request */ |
| #define L2CEVT_L2CA_CONNECT_RSP 22 /* Upper layer connect response */ |
| #define L2CEVT_L2CA_CONNECT_RSP_NEG 23 /* Upper layer connect response (failed)*/ |
| #define L2CEVT_L2CA_CONFIG_REQ 24 /* Upper layer config request */ |
| #define L2CEVT_L2CA_CONFIG_RSP 25 /* Upper layer config response */ |
| #define L2CEVT_L2CA_CONFIG_RSP_NEG 26 /* Upper layer config response (failed) */ |
| #define L2CEVT_L2CA_DISCONNECT_REQ 27 /* Upper layer disconnect request */ |
| #define L2CEVT_L2CA_DISCONNECT_RSP 28 /* Upper layer disconnect response */ |
| #define L2CEVT_L2CA_DATA_READ 29 /* Upper layer data read */ |
| #define L2CEVT_L2CA_DATA_WRITE 30 /* Upper layer data write */ |
| #define L2CEVT_L2CA_FLUSH_REQ 31 /* Upper layer flush */ |
| |
| #define L2CEVT_TIMEOUT 32 /* Timeout */ |
| #define L2CEVT_SEC_RE_SEND_CMD 33 /* btm_sec has enough info to proceed */ |
| |
| #define L2CEVT_ACK_TIMEOUT 34 /* RR delay timeout */ |
| |
| |
| /* Bitmask to skip over Broadcom feature reserved (ID) to avoid sending two |
| successive ID values, '0' id only or both */ |
| #define L2CAP_ADJ_BRCM_ID 0x1 |
| #define L2CAP_ADJ_ZERO_ID 0x2 |
| #define L2CAP_ADJ_ID 0x3 |
| |
| /* Return values for l2cu_process_peer_cfg_req() */ |
| #define L2CAP_PEER_CFG_UNACCEPTABLE 0 |
| #define L2CAP_PEER_CFG_OK 1 |
| #define L2CAP_PEER_CFG_DISCONNECT 2 |
| |
| /* eL2CAP option constants */ |
| #define L2CAP_MIN_RETRANS_TOUT 2000 /* Min retransmission timeout if no flush timeout or PBF */ |
| #define L2CAP_MIN_MONITOR_TOUT 12000 /* Min monitor timeout if no flush timeout or PBF */ |
| |
| #define L2CAP_MAX_FCR_CFG_TRIES 2 /* Config attempts before disconnecting */ |
| |
| /* Only compiled in when in test mode. Production devices must not include |
| */ |
| #if L2CAP_CORRUPT_ERTM_PKTS == TRUE |
| |
| /* These are used for conformance and corruption testing only */ |
| typedef struct |
| { |
| BOOLEAN in_use; /* TRUE if test in progress */ |
| UINT8 type; /* Type of test to run or turns off random test */ |
| UINT8 freq; /* One-shot or random */ |
| BOOLEAN is_rx; /* TRUE if incoming packets */ |
| UINT16 count; /* How many I-frames to drop in a row; used only with one-shot tests */ |
| } tL2C_FCR_TEST_CFG; |
| |
| typedef struct |
| { |
| BOOLEAN in_use; /* TRUE if test in progress */ |
| UINT8 skip_sframe_count; /* Number of S-Frames to skip sending */ |
| } tL2C_FCR_CFM_TEST_CB; |
| |
| typedef struct |
| { |
| tL2C_FCR_TEST_CFG cfg; /* Current corruption test configuration */ |
| tL2C_FCR_CFM_TEST_CB cfm; /* Conformance test structure */ |
| } tL2C_FCR_TEST_CB; |
| |
| #endif /* L2CAP_CORRUPT_ERTM_PKTS == TRUE */ |
| |
| typedef struct |
| { |
| UINT8 next_tx_seq; /* Next sequence number to be Tx'ed */ |
| UINT8 last_rx_ack; /* Last sequence number ack'ed by the peer */ |
| UINT8 next_seq_expected; /* Next peer sequence number expected */ |
| UINT8 last_ack_sent; /* Last peer sequence number ack'ed */ |
| UINT8 num_tries; /* Number of retries to send a packet */ |
| UINT8 max_held_acks; /* Max acks we can hold before sending */ |
| |
| BOOLEAN remote_busy; /* TRUE if peer has flowed us off */ |
| BOOLEAN local_busy; /* TRUE if we have flowed off the peer */ |
| |
| BOOLEAN rej_sent; /* Reject was sent */ |
| BOOLEAN srej_sent; /* Selective Reject was sent */ |
| BOOLEAN wait_ack; /* Transmitter is waiting ack (poll sent) */ |
| BOOLEAN rej_after_srej; /* Send a REJ when SREJ clears */ |
| |
| BOOLEAN send_f_rsp; /* We need to send an F-bit response */ |
| |
| UINT16 rx_sdu_len; /* Length of the SDU being received */ |
| BT_HDR *p_rx_sdu; /* Buffer holding the SDU being received */ |
| BUFFER_Q waiting_for_ack_q; /* Buffers sent and waiting for peer to ack */ |
| BUFFER_Q srej_rcv_hold_q; /* Buffers rcvd but held pending SREJ rsp */ |
| BUFFER_Q retrans_q; /* Buffers being retransmitted */ |
| |
| TIMER_LIST_ENT ack_timer; /* Timer delaying RR */ |
| TIMER_LIST_ENT mon_retrans_timer; /* Timer Monitor or Retransmission */ |
| |
| #if (L2CAP_ERTM_STATS == TRUE) |
| UINT32 connect_tick_count; /* Time channel was established */ |
| UINT32 ertm_pkt_counts[2]; /* Packets sent and received */ |
| UINT32 ertm_byte_counts[2]; /* Bytes sent and received */ |
| UINT32 s_frames_sent[4]; /* S-frames sent (RR, REJ, RNR, SREJ) */ |
| UINT32 s_frames_rcvd[4]; /* S-frames rcvd (RR, REJ, RNR, SREJ) */ |
| UINT32 xmit_window_closed; /* # of times the xmit window was closed */ |
| UINT32 controller_idle; /* # of times less than 2 packets in controller */ |
| /* when the xmit window was closed */ |
| UINT32 pkts_retransmitted; /* # of packets that were retransmitted */ |
| UINT32 retrans_touts; /* # of retransmission timouts */ |
| UINT32 xmit_ack_touts; /* # of xmit ack timouts */ |
| |
| #define L2CAP_ERTM_STATS_NUM_AVG 10 |
| #define L2CAP_ERTM_STATS_AVG_NUM_SAMPLES 100 |
| UINT32 ack_delay_avg_count; |
| UINT32 ack_delay_avg_index; |
| UINT32 throughput_start; |
| UINT32 throughput[L2CAP_ERTM_STATS_NUM_AVG]; |
| UINT32 ack_delay_avg[L2CAP_ERTM_STATS_NUM_AVG]; |
| UINT32 ack_delay_min[L2CAP_ERTM_STATS_NUM_AVG]; |
| UINT32 ack_delay_max[L2CAP_ERTM_STATS_NUM_AVG]; |
| UINT32 ack_q_count_avg[L2CAP_ERTM_STATS_NUM_AVG]; |
| UINT32 ack_q_count_min[L2CAP_ERTM_STATS_NUM_AVG]; |
| UINT32 ack_q_count_max[L2CAP_ERTM_STATS_NUM_AVG]; |
| #endif |
| |
| #if L2CAP_CORRUPT_ERTM_PKTS == TRUE |
| tL2C_FCR_TEST_CB test_cb; /* Used for SVT and UPF testing */ |
| #endif |
| |
| } tL2C_FCRB; |
| |
| |
| /* Define a registration control block. Every application (e.g. RFCOMM, SDP, |
| ** TCS etc) that registers with L2CAP is assigned one of these. |
| */ |
| #if (L2CAP_UCD_INCLUDED == TRUE) |
| #define L2C_UCD_RCB_ID 0x00 |
| #define L2C_UCD_STATE_UNUSED 0x00 |
| #define L2C_UCD_STATE_W4_DATA 0x01 |
| #define L2C_UCD_STATE_W4_RECEPTION 0x02 |
| #define L2C_UCD_STATE_W4_MTU 0x04 |
| |
| typedef struct |
| { |
| UINT8 state; |
| tL2CAP_UCD_CB_INFO cb_info; |
| } tL2C_UCD_REG; |
| #endif |
| |
| typedef struct |
| { |
| BOOLEAN in_use; |
| UINT16 psm; |
| UINT16 real_psm; /* This may be a dummy RCB for an o/b connection but */ |
| /* this is the real PSM that we need to connect to */ |
| #if (L2CAP_UCD_INCLUDED == TRUE) |
| tL2C_UCD_REG ucd; |
| #endif |
| |
| tL2CAP_APPL_INFO api; |
| } tL2C_RCB; |
| |
| |
| /* Define a channel control block (CCB). There may be many channel control blocks |
| ** between the same two Bluetooth devices (i.e. on the same link). |
| ** Each CCB has unique local and remote CIDs. All channel control blocks on |
| ** the same physical link and are chained together. |
| */ |
| typedef struct t_l2c_ccb |
| { |
| BOOLEAN in_use; /* TRUE when in use, FALSE when not */ |
| tL2C_CHNL_STATE chnl_state; /* Channel state */ |
| |
| struct t_l2c_ccb *p_next_ccb; /* Next CCB in the chain */ |
| struct t_l2c_ccb *p_prev_ccb; /* Previous CCB in the chain */ |
| struct t_l2c_linkcb *p_lcb; /* Link this CCB is assigned to */ |
| |
| UINT16 local_cid; /* Local CID */ |
| UINT16 remote_cid; /* Remote CID */ |
| |
| TIMER_LIST_ENT timer_entry; /* CCB Timer List Entry */ |
| |
| tL2C_RCB *p_rcb; /* Registration CB for this Channel */ |
| |
| #define IB_CFG_DONE 0x01 |
| #define OB_CFG_DONE 0x02 |
| #define RECONFIG_FLAG 0x04 /* True after initial configuration */ |
| #define CFG_DONE_MASK (IB_CFG_DONE | OB_CFG_DONE) |
| |
| UINT8 config_done; /* Configuration flag word */ |
| UINT8 local_id; /* Transaction ID for local trans */ |
| UINT8 remote_id; /* Transaction ID for local */ |
| |
| #define CCB_FLAG_NO_RETRY 0x01 /* no more retry */ |
| #define CCB_FLAG_SENT_PENDING 0x02 /* already sent pending response */ |
| UINT8 flags; |
| |
| tL2CAP_CFG_INFO our_cfg; /* Our saved configuration options */ |
| tL2CAP_CH_CFG_BITS peer_cfg_bits; /* Store what peer wants to configure */ |
| tL2CAP_CFG_INFO peer_cfg; /* Peer's saved configuration options */ |
| |
| BUFFER_Q xmit_hold_q; /* Transmit data hold queue */ |
| |
| BOOLEAN cong_sent; /* Set when congested status sent */ |
| UINT16 buff_quota; /* Buffer quota before sending congestion */ |
| |
| tL2CAP_CHNL_PRIORITY ccb_priority; /* Channel priority */ |
| tL2CAP_CHNL_DATA_RATE tx_data_rate; /* Channel Tx data rate */ |
| tL2CAP_CHNL_DATA_RATE rx_data_rate; /* Channel Rx data rate */ |
| |
| /* Fields used for eL2CAP */ |
| tL2CAP_ERTM_INFO ertm_info; |
| tL2C_FCRB fcrb; |
| UINT16 tx_mps; /* TX MPS adjusted based on current controller */ |
| UINT16 max_rx_mtu; |
| UINT8 fcr_cfg_tries; /* Max number of negotiation attempts */ |
| BOOLEAN peer_cfg_already_rejected; /* If mode rejected once, set to TRUE */ |
| BOOLEAN out_cfg_fcr_present; /* TRUE if cfg response shoulkd include fcr options */ |
| |
| #define L2CAP_CFG_FCS_OUR 0x01 /* Our desired config FCS option */ |
| #define L2CAP_CFG_FCS_PEER 0x02 /* Peer's desired config FCS option */ |
| #define L2CAP_BYPASS_FCS (L2CAP_CFG_FCS_OUR | L2CAP_CFG_FCS_PEER) |
| UINT8 bypass_fcs; |
| |
| #if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE) |
| BOOLEAN is_flushable; /* TRUE if channel is flushable */ |
| #endif |
| |
| #if (L2CAP_NUM_FIXED_CHNLS > 0) || (L2CAP_UCD_INCLUDED == TRUE) |
| UINT16 fixed_chnl_idle_tout; /* Idle timeout to use for the fixed channel */ |
| #endif |
| |
| } tL2C_CCB; |
| |
| /*********************************************************************** |
| ** Define a queue of linked CCBs. |
| */ |
| typedef struct |
| { |
| tL2C_CCB *p_first_ccb; /* The first channel in this queue */ |
| tL2C_CCB *p_last_ccb; /* The last channel in this queue */ |
| } tL2C_CCB_Q; |
| |
| #if (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE) |
| |
| /* Round-Robin service for the same priority channels */ |
| #define L2CAP_NUM_CHNL_PRIORITY 3 /* Total number of priority group (high, medium, low)*/ |
| #define L2CAP_CHNL_PRIORITY_WEIGHT 5 /* weight per priority for burst transmission quota */ |
| #define L2CAP_GET_PRIORITY_QUOTA(pri) ((L2CAP_NUM_CHNL_PRIORITY - (pri)) * L2CAP_CHNL_PRIORITY_WEIGHT) |
| |
| /* CCBs within the same LCB are served in round robin with priority */ |
| /* It will make sure that low priority channel (for example, HF signaling on RFCOMM) */ |
| /* can be sent to headset even if higher priority channel (for example, AV media channel) */ |
| /* is congested. */ |
| |
| typedef struct |
| { |
| tL2C_CCB *p_serve_ccb; /* current serving ccb within priority group */ |
| tL2C_CCB *p_first_ccb; /* first ccb of priority group */ |
| UINT8 num_ccb; /* number of channels in priority group */ |
| UINT8 quota; /* burst transmission quota */ |
| } tL2C_RR_SERV; |
| |
| #endif /* (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE) */ |
| |
| /* Define a link control block. There is one link control block between |
| ** this device and any other device (i.e. BD ADDR). |
| */ |
| typedef struct t_l2c_linkcb |
| { |
| BOOLEAN in_use; /* TRUE when in use, FALSE when not */ |
| tL2C_LINK_STATE link_state; |
| |
| TIMER_LIST_ENT timer_entry; /* Timer list entry for timeout evt */ |
| UINT16 handle; /* The handle used with LM */ |
| |
| tL2C_CCB_Q ccb_queue; /* Queue of CCBs on this LCB */ |
| |
| tL2C_CCB *p_pending_ccb; /* ccb of waiting channel during link disconnect */ |
| TIMER_LIST_ENT info_timer_entry; /* Timer entry for info resp timeout evt */ |
| BD_ADDR remote_bd_addr; /* The BD address of the remote */ |
| |
| UINT8 link_role; /* Master or slave */ |
| UINT8 id; |
| UINT8 cur_echo_id; /* Current id value for echo request */ |
| tL2CA_ECHO_RSP_CB *p_echo_rsp_cb; /* Echo response callback */ |
| UINT16 idle_timeout; /* Idle timeout */ |
| BOOLEAN is_bonding; /* True - link active only for bonding */ |
| |
| UINT16 link_flush_tout; /* Flush timeout used */ |
| |
| UINT16 link_xmit_quota; /* Num outstanding pkts allowed */ |
| UINT16 sent_not_acked; /* Num packets sent but not acked */ |
| |
| BOOLEAN partial_segment_being_sent; /* Set TRUE when a partial segment */ |
| /* is being sent. */ |
| BOOLEAN w4_info_rsp; /* TRUE when info request is active */ |
| UINT8 info_rx_bits; /* set 1 if received info type */ |
| UINT32 peer_ext_fea; /* Peer's extended features mask */ |
| BUFFER_Q link_xmit_data_q; /* Transmit data buffer queue */ |
| |
| UINT8 peer_chnl_mask[L2CAP_FIXED_CHNL_ARRAY_SIZE]; |
| #if (L2CAP_UCD_INCLUDED == TRUE) |
| UINT16 ucd_mtu; /* peer MTU on UCD */ |
| BUFFER_Q ucd_out_sec_pending_q; /* Security pending outgoing UCD packet */ |
| BUFFER_Q ucd_in_sec_pending_q; /* Security pending incoming UCD packet */ |
| #endif |
| |
| #if (L2CAP_HOST_FLOW_CTRL == TRUE) |
| UINT16 link_pkts_unacked; /* Packets received but not acked */ |
| UINT16 link_ack_thresh; /* Threshold at which to ack pkts */ |
| #endif |
| |
| BT_HDR *p_hcit_rcv_acl; /* Current HCIT ACL buf being rcvd */ |
| UINT16 idle_timeout_sv; /* Save current Idle timeout */ |
| UINT8 acl_priority; /* L2C_PRIORITY_NORMAL or L2C_PRIORITY_HIGH */ |
| tL2CA_NOCP_CB *p_nocp_cb; /* Num Cmpl pkts callback */ |
| |
| #if (L2CAP_NUM_FIXED_CHNLS > 0) |
| tL2C_CCB *p_fixed_ccbs[L2CAP_NUM_FIXED_CHNLS]; |
| UINT16 disc_reason; |
| #endif |
| |
| tBT_TRANSPORT transport; |
| #if (BLE_INCLUDED == TRUE) |
| tBLE_ADDR_TYPE ble_addr_type; |
| |
| #define L2C_BLE_CONN_UPDATE_DISABLE 0x1 /* disable update connection parameters */ |
| #define L2C_BLE_NEW_CONN_PARAM 0x2 /* new connection parameter to be set */ |
| #define L2C_BLE_UPDATE_PENDING 0x4 /* waiting for connection update finished */ |
| #define L2C_BLE_NOT_DEFAULT_PARAM 0x8 /* not using default connection parameters */ |
| UINT8 conn_update_mask; |
| |
| UINT16 min_interval; /* parameters as requested by peripheral */ |
| UINT16 max_interval; |
| UINT16 latency; |
| UINT16 timeout; |
| |
| #endif |
| |
| #if (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE) |
| /* each priority group is limited burst transmission */ |
| /* round robin service for the same priority channels */ |
| tL2C_RR_SERV rr_serv[L2CAP_NUM_CHNL_PRIORITY]; |
| UINT8 rr_pri; /* current serving priority group */ |
| #endif |
| |
| } tL2C_LCB; |
| |
| /* Define the L2CAP control structure |
| */ |
| typedef struct |
| { |
| UINT8 l2cap_trace_level; |
| UINT16 controller_xmit_window; /* Total ACL window for all links */ |
| |
| UINT16 round_robin_quota; /* Round-robin link quota */ |
| UINT16 round_robin_unacked; /* Round-robin unacked */ |
| BOOLEAN check_round_robin; /* Do a round robin check */ |
| |
| BOOLEAN is_cong_cback_context; |
| |
| tL2C_LCB lcb_pool[MAX_L2CAP_LINKS]; /* Link Control Block pool */ |
| tL2C_CCB ccb_pool[MAX_L2CAP_CHANNELS]; /* Channel Control Block pool */ |
| tL2C_RCB rcb_pool[MAX_L2CAP_CLIENTS]; /* Registration info pool */ |
| |
| tL2C_CCB *p_free_ccb_first; /* Pointer to first free CCB */ |
| tL2C_CCB *p_free_ccb_last; /* Pointer to last free CCB */ |
| |
| UINT8 desire_role; /* desire to be master/slave when accepting a connection */ |
| BOOLEAN disallow_switch; /* FALSE, to allow switch at create conn */ |
| UINT16 num_lm_acl_bufs; /* # of ACL buffers on controller */ |
| UINT16 idle_timeout; /* Idle timeout */ |
| |
| BUFFER_Q rcv_hold_q; /* Recv pending queue */ |
| TIMER_LIST_ENT rcv_hold_tle; /* Timer list entry for rcv hold */ |
| |
| tL2C_LCB *p_cur_hcit_lcb; /* Current HCI Transport buffer */ |
| UINT16 num_links_active; /* Number of links active */ |
| |
| #if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE) |
| UINT16 non_flushable_pbf; /* L2CAP_PKT_START_NON_FLUSHABLE if controller supports */ |
| /* Otherwise, L2CAP_PKT_START */ |
| BOOLEAN is_flush_active; /* TRUE if an HCI_Enhanced_Flush has been sent */ |
| #endif |
| |
| #if L2CAP_CONFORMANCE_TESTING == TRUE |
| UINT32 test_info_resp; /* Conformance testing needs a dynamic response */ |
| #endif |
| |
| #if (L2CAP_NUM_FIXED_CHNLS > 0) |
| tL2CAP_FIXED_CHNL_REG fixed_reg[L2CAP_NUM_FIXED_CHNLS]; /* Reg info for fixed channels */ |
| #endif |
| |
| #if (BLE_INCLUDED == TRUE) |
| UINT16 num_ble_links_active; /* Number of LE links active */ |
| BOOLEAN is_ble_connecting; |
| BD_ADDR ble_connecting_bda; |
| UINT16 controller_le_xmit_window; /* Total ACL window for all links */ |
| UINT16 num_lm_ble_bufs; /* # of ACL buffers on controller */ |
| UINT16 ble_round_robin_quota; /* Round-robin link quota */ |
| UINT16 ble_round_robin_unacked; /* Round-robin unacked */ |
| BOOLEAN ble_check_round_robin; /* Do a round robin check */ |
| #endif |
| |
| tL2CA_ECHO_DATA_CB *p_echo_data_cb; /* Echo data callback */ |
| |
| #if (defined(L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE) && (L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE == TRUE)) |
| UINT16 high_pri_min_xmit_quota; /* Minimum number of ACL credit for high priority link */ |
| #endif /* (L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE == TRUE) */ |
| |
| UINT16 dyn_psm; |
| } tL2C_CB; |
| |
| |
| |
| /* Define a structure that contains the information about a connection. |
| ** This structure is used to pass between functions, and not all the |
| ** fields will always be filled in. |
| */ |
| typedef struct |
| { |
| BD_ADDR bd_addr; /* Remote BD address */ |
| UINT8 status; /* Connection status */ |
| UINT16 psm; /* PSM of the connection */ |
| UINT16 l2cap_result; /* L2CAP result */ |
| UINT16 l2cap_status; /* L2CAP status */ |
| UINT16 remote_cid; /* Remote CID */ |
| } tL2C_CONN_INFO; |
| |
| |
| typedef void (tL2C_FCR_MGMT_EVT_HDLR) (UINT8, tL2C_CCB *); |
| |
| /* The offset in a buffer that L2CAP will use when building commands. |
| */ |
| #define L2CAP_SEND_CMD_OFFSET 0 |
| |
| |
| /* Number of ACL buffers to use for high priority channel |
| */ |
| #if (!defined(L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE) || (L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE == FALSE)) |
| #define L2CAP_HIGH_PRI_MIN_XMIT_QUOTA_A (L2CAP_HIGH_PRI_MIN_XMIT_QUOTA) |
| #else |
| #define L2CAP_HIGH_PRI_MIN_XMIT_QUOTA_A (l2cb.high_pri_min_xmit_quota) |
| #endif |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| |
| /* L2CAP global data |
| ************************************ |
| */ |
| #if (!defined L2C_DYNAMIC_MEMORY) || (L2C_DYNAMIC_MEMORY == FALSE) |
| L2C_API extern tL2C_CB l2cb; |
| #else |
| L2C_API extern tL2C_CB *l2c_cb_ptr; |
| #define l2cb (*l2c_cb_ptr) |
| #endif |
| |
| |
| /* Functions provided by l2c_main.c |
| ************************************ |
| */ |
| extern void l2c_init (void); |
| extern void l2c_process_timeout (TIMER_LIST_ENT *p_tle); |
| extern UINT8 l2c_data_write (UINT16 cid, BT_HDR *p_data, UINT16 flag); |
| extern void l2c_rcv_acl_data (BT_HDR *p_msg); |
| extern void l2c_process_held_packets (BOOLEAN timed_out); |
| |
| /* Functions provided by l2c_utils.c |
| ************************************ |
| */ |
| extern tL2C_LCB *l2cu_allocate_lcb (BD_ADDR p_bd_addr, BOOLEAN is_bonding, tBT_TRANSPORT transport); |
| extern BOOLEAN l2cu_start_post_bond_timer (UINT16 handle); |
| extern void l2cu_release_lcb (tL2C_LCB *p_lcb); |
| extern tL2C_LCB *l2cu_find_lcb_by_bd_addr (BD_ADDR p_bd_addr, tBT_TRANSPORT transport); |
| extern tL2C_LCB *l2cu_find_lcb_by_handle (UINT16 handle); |
| extern void l2cu_update_lcb_4_bonding (BD_ADDR p_bd_addr, BOOLEAN is_bonding); |
| |
| extern UINT8 l2cu_get_conn_role (tL2C_LCB *p_this_lcb); |
| extern BOOLEAN l2cu_set_acl_priority (BD_ADDR bd_addr, UINT8 priority, BOOLEAN reset_after_rs); |
| |
| extern void l2cu_enqueue_ccb (tL2C_CCB *p_ccb); |
| extern void l2cu_dequeue_ccb (tL2C_CCB *p_ccb); |
| extern void l2cu_change_pri_ccb (tL2C_CCB *p_ccb, tL2CAP_CHNL_PRIORITY priority); |
| |
| extern tL2C_CCB *l2cu_allocate_ccb (tL2C_LCB *p_lcb, UINT16 cid); |
| extern void l2cu_release_ccb (tL2C_CCB *p_ccb); |
| extern tL2C_CCB *l2cu_find_ccb_by_cid (tL2C_LCB *p_lcb, UINT16 local_cid); |
| extern tL2C_CCB *l2cu_find_ccb_by_remote_cid (tL2C_LCB *p_lcb, UINT16 remote_cid); |
| extern void l2cu_adj_id (tL2C_LCB *p_lcb, UINT8 adj_mask); |
| extern BOOLEAN l2c_is_cmd_rejected (UINT8 cmd_code, UINT8 id, tL2C_LCB *p_lcb); |
| |
| extern void l2cu_send_peer_cmd_reject (tL2C_LCB *p_lcb, UINT16 reason, |
| UINT8 rem_id,UINT16 p1, UINT16 p2); |
| extern void l2cu_send_peer_connect_req (tL2C_CCB *p_ccb); |
| extern void l2cu_send_peer_connect_rsp (tL2C_CCB *p_ccb, UINT16 result, UINT16 status); |
| extern void l2cu_send_peer_config_req (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg); |
| extern void l2cu_send_peer_config_rsp (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg); |
| extern void l2cu_send_peer_config_rej (tL2C_CCB *p_ccb, UINT8 *p_data, UINT16 data_len, UINT16 rej_len); |
| extern void l2cu_send_peer_disc_req (tL2C_CCB *p_ccb); |
| extern void l2cu_send_peer_disc_rsp (tL2C_LCB *p_lcb, UINT8 remote_id, UINT16 local_cid, UINT16 remote_cid); |
| extern void l2cu_send_peer_echo_req (tL2C_LCB *p_lcb, UINT8 *p_data, UINT16 data_len); |
| extern void l2cu_send_peer_echo_rsp (tL2C_LCB *p_lcb, UINT8 id, UINT8 *p_data, UINT16 data_len); |
| extern void l2cu_send_peer_info_rsp (tL2C_LCB *p_lcb, UINT8 id, UINT16 info_type); |
| extern void l2cu_reject_connection (tL2C_LCB *p_lcb, UINT16 remote_cid, UINT8 rem_id, UINT16 result); |
| extern void l2cu_send_peer_info_req (tL2C_LCB *p_lcb, UINT16 info_type); |
| extern void l2cu_set_acl_hci_header (BT_HDR *p_buf, tL2C_CCB *p_ccb); |
| extern void l2cu_check_channel_congestion (tL2C_CCB *p_ccb); |
| extern void l2cu_disconnect_chnl (tL2C_CCB *p_ccb); |
| |
| #if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE) |
| extern void l2cu_set_non_flushable_pbf(BOOLEAN); |
| #endif |
| |
| #if (BLE_INCLUDED == TRUE) |
| extern void l2cu_send_peer_ble_par_req (tL2C_LCB *p_lcb, UINT16 min_int, UINT16 max_int, UINT16 latency, UINT16 timeout); |
| extern void l2cu_send_peer_ble_par_rsp (tL2C_LCB *p_lcb, UINT16 reason, UINT8 rem_id); |
| #endif |
| |
| extern BOOLEAN l2cu_initialize_fixed_ccb (tL2C_LCB *p_lcb, UINT16 fixed_cid, tL2CAP_FCR_OPTS *p_fcr); |
| extern void l2cu_no_dynamic_ccbs (tL2C_LCB *p_lcb); |
| extern void l2cu_process_fixed_chnl_resp (tL2C_LCB *p_lcb); |
| |
| /* Functions provided by l2c_ucd.c |
| ************************************ |
| */ |
| #if (L2CAP_UCD_INCLUDED == TRUE) |
| void l2c_ucd_delete_sec_pending_q(tL2C_LCB *p_lcb); |
| void l2c_ucd_enqueue_pending_out_sec_q(tL2C_CCB *p_ccb, void *p_data); |
| BOOLEAN l2c_ucd_check_pending_info_req(tL2C_CCB *p_ccb); |
| BOOLEAN l2c_ucd_check_pending_out_sec_q(tL2C_CCB *p_ccb); |
| void l2c_ucd_send_pending_out_sec_q(tL2C_CCB *p_ccb); |
| void l2c_ucd_discard_pending_out_sec_q(tL2C_CCB *p_ccb); |
| BOOLEAN l2c_ucd_check_pending_in_sec_q(tL2C_CCB *p_ccb); |
| void l2c_ucd_send_pending_in_sec_q(tL2C_CCB *p_ccb); |
| void l2c_ucd_discard_pending_in_sec_q(tL2C_CCB *p_ccb); |
| BOOLEAN l2c_ucd_check_rx_pkts(tL2C_LCB *p_lcb, BT_HDR *p_msg); |
| BOOLEAN l2c_ucd_process_event(tL2C_CCB *p_ccb, UINT16 event, void *p_data); |
| #endif |
| |
| #if (BLE_INCLUDED == TRUE) |
| extern void l2cu_send_peer_ble_par_req (tL2C_LCB *p_lcb, UINT16 min_int, UINT16 max_int, UINT16 latency, UINT16 timeout); |
| extern void l2cu_send_peer_ble_par_rsp (tL2C_LCB *p_lcb, UINT16 reason, UINT8 rem_id); |
| #endif |
| |
| extern BOOLEAN l2cu_initialize_fixed_ccb (tL2C_LCB *p_lcb, UINT16 fixed_cid, tL2CAP_FCR_OPTS *p_fcr); |
| extern void l2cu_no_dynamic_ccbs (tL2C_LCB *p_lcb); |
| extern void l2cu_process_fixed_chnl_resp (tL2C_LCB *p_lcb); |
| |
| |
| /* Functions provided for Broadcom Aware |
| **************************************** |
| */ |
| extern BOOLEAN l2cu_check_feature_req (tL2C_LCB *p_lcb, UINT8 id, UINT8 *p_data, UINT16 data_len); |
| extern void l2cu_check_feature_rsp (tL2C_LCB *p_lcb, UINT8 id, UINT8 *p_data, UINT16 data_len); |
| extern void l2cu_send_feature_req (tL2C_CCB *p_ccb); |
| |
| extern tL2C_RCB *l2cu_allocate_rcb (UINT16 psm); |
| extern tL2C_RCB *l2cu_find_rcb_by_psm (UINT16 psm); |
| extern void l2cu_release_rcb (tL2C_RCB *p_rcb); |
| |
| extern UINT8 l2cu_process_peer_cfg_req (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg); |
| extern void l2cu_process_peer_cfg_rsp (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg); |
| extern void l2cu_process_our_cfg_req (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg); |
| extern void l2cu_process_our_cfg_rsp (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg); |
| |
| extern void l2cu_device_reset (void); |
| extern tL2C_LCB *l2cu_find_lcb_by_state (tL2C_LINK_STATE state); |
| extern BOOLEAN l2cu_lcb_disconnecting (void); |
| |
| extern BOOLEAN l2cu_create_conn (tL2C_LCB *p_lcb, tBT_TRANSPORT transport); |
| extern BOOLEAN l2cu_create_conn_after_switch (tL2C_LCB *p_lcb); |
| extern BT_HDR *l2cu_get_next_buffer_to_send (tL2C_LCB *p_lcb); |
| extern void l2cu_resubmit_pending_sec_req (BD_ADDR p_bda); |
| extern void l2cu_initialize_amp_ccb (tL2C_LCB *p_lcb); |
| extern void l2cu_adjust_out_mps (tL2C_CCB *p_ccb); |
| |
| /* Functions provided by l2c_link.c |
| ************************************ |
| */ |
| extern BOOLEAN l2c_link_hci_conn_req (BD_ADDR bd_addr); |
| extern BOOLEAN l2c_link_hci_conn_comp (UINT8 status, UINT16 handle, BD_ADDR p_bda); |
| extern BOOLEAN l2c_link_hci_disc_comp (UINT16 handle, UINT8 reason); |
| extern BOOLEAN l2c_link_hci_qos_violation (UINT16 handle); |
| extern void l2c_link_timeout (tL2C_LCB *p_lcb); |
| extern void l2c_info_timeout (tL2C_LCB *p_lcb); |
| extern void l2c_link_check_send_pkts (tL2C_LCB *p_lcb, tL2C_CCB *p_ccb, BT_HDR *p_buf); |
| extern void l2c_link_adjust_allocation (void); |
| extern void l2c_link_process_num_completed_pkts (UINT8 *p); |
| extern void l2c_link_process_num_completed_blocks (UINT8 controller_id, UINT8 *p, UINT16 evt_len); |
| extern void l2c_link_processs_num_bufs (UINT16 num_lm_acl_bufs); |
| extern UINT8 l2c_link_pkts_rcvd (UINT16 *num_pkts, UINT16 *handles); |
| extern void l2c_link_role_changed (BD_ADDR bd_addr, UINT8 new_role, UINT8 hci_status); |
| extern void l2c_link_sec_comp (BD_ADDR p_bda, tBT_TRANSPORT trasnport, void *p_ref_data, UINT8 status); |
| extern void l2c_link_segments_xmitted (BT_HDR *p_msg); |
| extern void l2c_pin_code_request (BD_ADDR bd_addr); |
| extern void l2c_link_adjust_chnl_allocation (void); |
| |
| #if (BLE_INCLUDED == TRUE) |
| extern void l2c_link_processs_ble_num_bufs (UINT16 num_lm_acl_bufs); |
| #endif |
| |
| #if ((BTM_PWR_MGR_INCLUDED == TRUE) && L2CAP_WAKE_PARKED_LINK == TRUE) |
| extern BOOLEAN l2c_link_check_power_mode ( tL2C_LCB *p_lcb ); |
| #define L2C_LINK_CHECK_POWER_MODE(x) l2c_link_check_power_mode ((x)) |
| #else |
| #define L2C_LINK_CHECK_POWER_MODE(x) (FALSE) |
| #endif |
| |
| #if L2CAP_CONFORMANCE_TESTING == TRUE |
| /* Used only for conformance testing */ |
| L2C_API extern void l2cu_set_info_rsp_mask (UINT32 mask); |
| #endif |
| |
| /* Functions provided by l2c_csm.c |
| ************************************ |
| */ |
| extern void l2c_csm_execute (tL2C_CCB *p_ccb, UINT16 event, void *p_data); |
| |
| L2C_API extern BT_HDR *l2cap_link_chk_pkt_start(BT_HDR *); /* Called at start of rcv to check L2CAP segmentation */ |
| L2C_API extern BOOLEAN l2cap_link_chk_pkt_end (void); /* Called at end of rcv to check L2CAP segmentation */ |
| |
| L2C_API extern void l2c_enqueue_peer_data (tL2C_CCB *p_ccb, BT_HDR *p_buf); |
| |
| |
| /* Functions provided by l2c_fcr.c |
| ************************************ |
| */ |
| extern void l2c_fcr_cleanup (tL2C_CCB *p_ccb); |
| extern void l2c_fcr_proc_pdu (tL2C_CCB *p_ccb, BT_HDR *p_buf); |
| extern void l2c_fcr_proc_tout (tL2C_CCB *p_ccb); |
| extern void l2c_fcr_proc_ack_tout (tL2C_CCB *p_ccb); |
| extern void l2c_fcr_send_S_frame (tL2C_CCB *p_ccb, UINT16 function_code, UINT16 pf_bit); |
| extern BT_HDR *l2c_fcr_clone_buf (BT_HDR *p_buf, UINT16 new_offset, UINT16 no_of_bytes, UINT8 pool); |
| extern BOOLEAN l2c_fcr_is_flow_controlled (tL2C_CCB *p_ccb); |
| extern BT_HDR *l2c_fcr_get_next_xmit_sdu_seg (tL2C_CCB *p_ccb, UINT16 max_packet_length); |
| extern void l2c_fcr_start_timer (tL2C_CCB *p_ccb); |
| |
| /* Configuration negotiation */ |
| extern UINT8 l2c_fcr_chk_chan_modes (tL2C_CCB *p_ccb); |
| extern BOOLEAN l2c_fcr_adj_our_req_options (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg); |
| extern void l2c_fcr_adj_our_rsp_options (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_peer_cfg); |
| extern BOOLEAN l2c_fcr_renegotiate_chan(tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg); |
| extern UINT8 l2c_fcr_process_peer_cfg_req(tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg); |
| extern void l2c_fcr_adj_monitor_retran_timeout (tL2C_CCB *p_ccb); |
| extern void l2c_fcr_stop_timer (tL2C_CCB *p_ccb); |
| |
| /* Functions provided by l2c_ble.c |
| ************************************ |
| */ |
| #if (BLE_INCLUDED == TRUE) |
| extern BOOLEAN l2cble_create_conn (tL2C_LCB *p_lcb); |
| extern void l2cble_process_sig_cmd (tL2C_LCB *p_lcb, UINT8 *p, UINT16 pkt_len); |
| extern void l2cble_conn_comp (UINT16 handle, UINT8 role, BD_ADDR bda, tBLE_ADDR_TYPE type, |
| UINT16 conn_interval, UINT16 conn_latency, UINT16 conn_timeout); |
| extern BOOLEAN l2cble_init_direct_conn (tL2C_LCB *p_lcb); |
| extern void l2cble_notify_le_connection (BD_ADDR bda); |
| extern void l2c_ble_link_adjust_allocation (void); |
| extern void l2cble_process_conn_update_evt (UINT16 handle, UINT8 status); |
| |
| #if (defined BLE_LLT_INCLUDED) && (BLE_LLT_INCLUDED == TRUE) |
| extern void l2cble_process_rc_param_request_evt(UINT16 handle, UINT16 int_min, UINT16 int_max, |
| UINT16 latency, UINT16 timeout); |
| #endif |
| #endif |
| extern void l2cu_process_fixed_disc_cback (tL2C_LCB *p_lcb); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |
