2012-12-12  Akim Demaille  <akim@lrde.epita.fr>

	version 2.7
	* NEWS: Record release date.

2012-12-12  Akim Demaille  <akim@lrde.epita.fr>

	yacc.c: scope reduction
	* data/yacc.c (yysyntax_error): here.

2012-12-12  Akim Demaille  <akim@lrde.epita.fr>

	tests: C90 compliance
	* tests/synclines.at: here.

2012-12-12  Akim Demaille  <akim@lrde.epita.fr>

	fix C90 compliance
	* data/glr.c, src/graphviz.h, src/ielr.c, src/scan-gram.l,
	* src/system.h, tests/actions.at, tests/glr-regression.at: Do not
	use // comments.
	Do not introduce variables after statements.
	Provide "main" with a return value.

2012-12-12  Akim Demaille  <akim@lrde.epita.fr>

	glr.c: scope reduction
	* data/glr.c (yyreportSyntaxError): Reduce the scope of yysize1 (now
	yysz).

2012-12-12  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-12-09  Akim Demaille  <akim@lrde.epita.fr>

	news: prepare for forthcoming release
	* NEWS: Fill paragraph.
	Reorder.
	Update examples.
	Remove line for 2.6.90.

2012-12-09  Akim Demaille  <akim@lrde.epita.fr>

	doc: explain how mid-rule actions are translated
	* doc/bison.texi (Actions in Mid-Rule): Mention and use named references.
	Split into three subsections, among which...
	(Mid-Rule Action Translation): this new section.

2012-12-09  Akim Demaille  <akim@lrde.epita.fr>

	error: use better locations for unused midrule values
	On

	  %%
	  exp: {;} {$$;} { $$ = $1; }

	instead of reporting (with -fcaret -Wmidrule-value)

	  midrule.y:2.6-8: warning: unset value: $$ [-Wmidrule-values]
	   exp: {;} {$$;} { $$ = $1; }
	        ^^^
	  midrule.y:2.6-27: warning: unused value: $2 [-Wmidrule-values]
	   exp: {;} {$$;} { $$ = $1; }
	        ^^^^^^^^^^^^^^^^^^^^^^

	report

	  midrule.y:2.6-8: warning: unset value: $$
	   exp: {;} {$$;} { $$ = $1; }
	        ^^^
	  midrule.y:2.10-14: warning: unused value: $2
	   exp: {;} {$$;} { $$ = $1; }
	            ^^^^^

	* src/reader.c (grammar_rule_check): When warning about the value of a
	midrule action, use the location of the midrule action instead of the
	location of the rule.
	the location of the part of the rule.
	* tests/actions.at (Default %printer and %destructor for mid-rule values):
	Adjust expectations
	* tests/input.at (Unused values with default %destructor): Ditto.
	(AT_CHECK_UNUSED_VALUES): Ditto.
	And use -fcaret.

2012-12-09  Akim Demaille  <akim@lrde.epita.fr>

	doc: various minor improvements and fixes
	* doc/figs/example.dot, doc/figs/example.y: New.
	* doc/bison.texi: Prefer "token" to TOKEN.
	Use @group where appropriate.
	Adjust with style changes in the output (State 0, not state 0).
	Fix some @ref that were missing the third argument.
	Fix some incorrect line numbers.
	Use "nonterminal", not "non-terminal".
	Fix overfull and underfull TeX hboxes.
	Put the comments in the index.
	Remove duplicate index entries.
	Fuse glossary entries where appropriate.
	(Understanding): Improve the continuity between sections.
	Use example.dot to show the whole graph.
	* doc/Makefile.am: Adjust.

2012-12-09  Akim Demaille  <akim@lrde.epita.fr>

	tests: ignore more useless compiler warnings
	* tests/synclines.at (AT_SYNCLINES_COMPILE): Ignore complains about
	using c++ to compile C.

2012-12-09  Akim Demaille  <akim@lrde.epita.fr>

	tests: be robust to C being compiled with a C++11 compiler
	* tests/glr-regression.at: Use YY_NULL instead of NULL.
	Comment changes.

2012-12-09  Akim Demaille  <akim@lrde.epita.fr>

	build: beware of Clang++ not supporting POSIXLY_CORRECT
	* m4/c-working.m4 (BISON_LANG_COMPILER_POSIXLY_CORRECT): New.
	(BISON_C_COMPILER_POSIXLY_CORRECT): Use it.
	For consistency with C++, also define BISON_C_WORKS.
	* m4/cxx.m4 (BISON_CXX_COMPILER_POSIXLY_CORRECT): New.
	* configure.ac: Use it.
	* tests/atlocal.in: Get its result.
	Propagate properly CXX values when used to compile C.
	When POSIXLY_CORRECT, adjust BISON_C_WORKS and BISON_CXX_WORKS.
	* tests/local.at (AT_COMPILE): Use BISON_C_WORKS.

2012-12-07  Akim Demaille  <akim@lrde.epita.fr>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

2012-12-07  Akim Demaille  <akim@lrde.epita.fr>

	version 2.6.90
	* NEWS: Record release date.

2012-12-07  Akim Demaille  <akim@lrde.epita.fr>

	build: fix syntax-check error.
	* cfg.mk: Exclude names-refs, it includes a "double" if (end of first
	line, first of second line below).

	test.y:43.12-44.59:  symbol not found in production: if
	 if-stmt-a: IF expr[cond] THEN stmt.list[then] ELSE stmt.list[else] FI
	            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

2012-12-07  Theophile Ranquet  <ranquet@lrde.epita.fr>

	cpp: simplify the Flex version checking macro
	* src/flex-scanner,h (FLEX_VERSION): Consider YY_FLEX_SUBMINOR_VERSION
	defined.

2012-12-07  Theophile Ranquet  <ranquet@lrde.epita.fr>

	news: improve the carets example and fix a typo
	* NEWS: Here.

2012-12-07  Theophile Ranquet  <ranquet@lrde.epita.fr>

	cpp: improve the Flex version checking macro
	* src/flex-scanner.h (FLEX_VERSION): Here.

2012-12-07  Theophile Ranquet  <ranquet@lrde.epita.fr>

	carets: improve the code
	* src/location.c: Remove duplicate documentations.
	(caret_info): Stylistic change.
	(location_caret): Many reworks.

2012-12-07  Akim Demaille  <akim@lrde.epita.fr>

	maint: update news
	* NEWS: There is no 2.6.6, remove its stub.

2012-12-07  Akim Demaille  <akim@lrde.epita.fr>

	build: keep -Wmissing-declarations and -Wmissing-prototypes for modern GCCs
	Fixes a -Werror failure of xalloc.h used in src.
	From Eric Blake.
	http://lists.gnu.org/archive/html/bug-gnulib/2012-12/msg00006.html

	* configure.ac: Check whether GCC pragma diagnostic push/pop works.
	Enable these warnings for bison if it does.
	Enable these warnings for the test suite anyway.

2012-12-07  Akim Demaille  <akim@lrde.epita.fr>

	build: drop -Wcast-qual
	Suggested by Jim Meyering.
	http://lists.gnu.org/archive/html/bug-gnulib/2012-12/msg00017.html
	* configure.ac (warn_common): Remove -Wcast-qual.

2012-12-07  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-12-06  Theophile Ranquet  <ranquet@lrde.epita.fr>

	misc: pacify the Tiny C Compiler
	* src/graphviz.c (conclude_red): Remove a useless return.

2012-12-05  Theophile Ranquet  <ranquet@lrde.epita.fr>

	cpp: make the check of Flex version portable
	This was problematic with tcc 0.9.25

	* src/flex-scanner.h (FLEX_VERSION_GT): Rewrite and rename as...
	(FLEX_VERSION): This.

2012-12-05  Theophile Ranquet  <ranquet@lrde.epita.fr>

	misc: require getline
	* bootstrap.conf: Here, used by src/location.c.
	* src/getargs.c (long_options): Rename --flags to --feature.

2012-12-05  Akim Demaille  <akim@lrde.epita.fr>

	c++: support wide strings for file names
	Reported by Mark Boyall.
	http://lists.gnu.org/archive/html/help-bison/2011-08/msg00002.html

	* data/location.cc (operator<<): Be templated on the type of
	output stream.
	* tests/headers.at (Several parsers): Adjust.

2012-12-05  Theophile Ranquet  <ranquet@lrde.epita.fr>

	doc: document carets
	* NEWS: Announce it.
	* doc/bison.texi (Bison Options):  Here.

2012-12-05  Theophile Ranquet  <ranquet@lrde.epita.fr>

	tests: enhance existing tests with carets
	* tests/actions.at: Unset value.
	* tests/conflicts.at: Rule useless due to conflicts.
	* tests/input.at: Missing terminator, unexpected end of file, command line
	redefinition of variable.
	* tests/named-refs.at: Many errors.
	* tests/reduce.at: Useless nonterminals and rules.
	* tests/regression.at: Large token.

2012-12-05  Theophile Ranquet  <ranquet@lrde.epita.fr>

	errors: show carets
	* src/locations.c (caret_info): New, persistant information useful
	for...
	(location_caret): New, print a caret.
	(cleanup_caret): Release caret_info cleanly, call it...
	* src/main.c (main): Here.
	* src/complain.c (error_message): Call location_caret here.

2012-12-05  Theophile Ranquet  <ranquet@lrde.epita.fr>

	getargs: add support for --feature/-f
	Introduce -fdiagnostics-show-caret

	* src/getargs.c (feature_flag): New global.
	* src/getargs.h (feature): New enum.

2012-12-04  Theophile Ranquet  <ranquet@lrde.epita.fr>

	getargs: don't label --language/-l as experimental
	* NEWS: Announce it.
	* doc/bison.texi, src/getargs.c (usage): Here.

2012-12-03  Theophile Ranquet  <ranquet@lrde.epita.fr>

	getargs: fix the locations of command-line input
	* src/getargs.c (command_line_location): Here.
	* tests/input.at: Adjust.

2012-12-03  Theophile Ranquet  <ranquet@lrde.epita.fr>

	errors: indent missing action code semicolon warning
	Also, remove a duplicate #define.

	* src/scan-code.l (SC_RULE_ACTION): Here.
	* tests/actions.at: Adjust.

2012-12-03  Akim Demaille  <akim@lrde.epita.fr>

	parser: accept #line NUM
	* src/scan-gram.l (scanner): Accept '#line NUM'.
	(handle_syncline): Adjust to the possible missing file name.

2012-12-03  Akim Demaille  <akim@lrde.epita.fr>

	m4: use a safer pattern to enable/disable output
	Work on some other areas of Bison revealed that some macros expanded
	to be expanded only once were actually expanded several times.  This
	was due to the fact that changecom was not properly restored each
	time, and macro names appearing in comments were then expanded.

	Introduce begin/end macros which are easier to match that
	changecom()/changecom(#).

	* data/bison.m4 (b4_output_begin, b4_output_end): New.
	* data/glr.c, data/glr.cc, data/lalr1.cc, data/lalr1.java,
	* data/location.cc, data/stack.hh, data/yacc.c:
	Use them.

2012-12-03  Akim Demaille  <akim@lrde.epita.fr>

	tests: beware of gnulib's need for config.h
	* tests/skeletons.at, tests/torture.at: Be sure to include config.h
	where appropriate.

2012-11-30  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update
	* lib/yyerror.c: Include config.h since the following stdio.h might be
	from gnulib.

2012-11-30  Akim Demaille  <akim@lrde.epita.fr>

	yacc.c, glr.c: check and fix the display of locations
	In some case, negative column number could be displayed.
	Make YY_LOCATION_PRINT similar to bison's own implementation of
	locations.  Since the macro is getting fat, make it a static
	function.
	Reported by Jonathan Fabrizio.

	* data/c.m4 (yy_location_print_define): Improve the implementation,
	and generate the yy_location_print_ function.
	Adjust YY_LOCATION_PRINT.
	* tests/actions.at (Location Print): New tests.

2012-11-30  Akim Demaille  <akim@lrde.epita.fr>

	formatting changes
	* data/c.m4: Fix comments, put macros in a more natural order.
	Space changes (from M-x whitespace-cleanup).
	* src/location.c: Fix spaces.
	* tests/actions.at: Space changes.

2012-11-30  Akim Demaille  <akim@lrde.epita.fr>

	glr.c: remove stray macro
	* data/glr.c (YYOPTIONAL_LOC): Remove, unused since commit
	769a8ef9bcb5e14d0be9d0869f5dca20ab093930.

2012-11-29  Akim Demaille  <akim@lrde.epita.fr>

	doc: minor fixes
	* doc/bison.texi: Use stderr for error messages.
	Meta-variables are usually spelled in lower case.
	Use @code for function names.

2012-11-29  Akim Demaille  <akim@lrde.epita.fr>

	doc: improve the index
	* doc/bison.texi: Fix uses of "deffn" so that the arguments of the
	directives do not show in the index.
	Remove a duplicate entry for api.pure.

2012-11-29  Theophile Ranquet  <ranquet@lrde.epita.fr>

	doc: introduce api.pure full, rearrange some examples
	* NEWS: Add entry.
	* doc/bison.texi (%define Summary): Show the old Yacc behaviour.
	(Parser Function): Move parse-param examples here.
	(Pure Calling): Remove parse-param examples.
	(Error Reporting): Don't show the old behavior, stick to 'full'.

2012-11-29  Theophile Ranquet  <ranquet@lrde.epita.fr>

	yacc.c: support "%define api.pure full"
	This makes the interface for yyerror() pure without the need for a spurious
	parse_param.

	* data/yacc.c (b4_pure_if, b4_pure_flag): New definition, accept three states.
	(b4_yacc_pure_if): Rename as...
	(b4_yyerror_arg_loc_if): This, and use b4_pure_flag.
	* tests/actions.at (%define api.pure): Modernize.
	* test/calc.at (Simple LALR Calculator): Modernize.
	* tests/local.at (AT_YYERROR_ARG_LOC_IF): Adjust.

2012-11-26  Theophile Ranquet  <ranquet@lrde.epita.fr>

	local.at: improvements
	* tests/local.at (AT_YYERROR_FORMALS): Make llocp const.
	(AT_PURE_AND_LOC_IF, AT_GLR_OR_PARAM_IF): Remove, expand...
	(AT_YYERROR_ARG_LOC_IF): Here, and use m4_join for readability.

2012-11-26  Akim Demaille  <akim@lrde.epita.fr>

	Merge remote-tracking branch 'origin/branch-2.6' into maint
	* origin/branch-2.6:
	  yacc.c: always initialize yylloc
	  doc: one of the fixes for an ambiguous grammar was ambiguous too
	  doc: fix the dangling else with precedence directives
	  doc: prefer "token" to TOKEN
	  doc: formatting changes

2012-11-23  Theophile Ranquet  <ranquet@lrde.epita.fr>

	yacc.c: always initialize yylloc
	The initial location might be used if the parser starts by an empty
	reduction, so really ensure proper initialization of the initial
	location.  The previous approach fails for PostgreSQL, which uses
	Reported by Peter Eisentraut.
	http://lists.gnu.org/archive/html/bug-bison/2012-11/msg00023.html
	With help from Théophile Ranquet.

	* data/yacc.c (b4_declare_scanner_communication_variables): Be sure
	to initialize yylloc, even when its structure is unknown.
	(yyparse): Simplify the call to b4_dollar_pushdef.
	* tests/actions.at (Initial location): Check of similar pattern
	as in the case of PostgreSQL.

2012-11-23  Akim Demaille  <akim@lrde.epita.fr>

	scanner: issue a single error for groups of invalid characters
	* src/scan-gram.l: Scan groups of invalid characters together.
	* tests/input.at, tests/named-refs.at: Adjust.

2012-11-23  Akim Demaille  <akim@lrde.epita.fr>

	tests: formatting changes
	* tests/named-refs.at: Here.

2012-11-23  Akim Demaille  <akim@lrde.epita.fr>

	doc: one of the fixes for an ambiguous grammar was ambiguous too
	Reported by Аскар Сафин.
	http://lists.gnu.org/archive/html/bug-bison/2012-11/msg00024.html

	* doc/bison.texi (Reduce/Reduce): Fix the resulting ambiguity using
	precedence/associativity directives.

2012-11-22  Akim Demaille  <akim@lrde.epita.fr>

	doc: fix the dangling else with precedence directives
	* doc/bison.texi (Non Operators): New node.
	(Shift/Reduce): Point to it.
	Don't promote "%expect n" too much.

2012-11-22  Akim Demaille  <akim@lrde.epita.fr>

	doc: prefer "token" to TOKEN
	This is more readable in short examples.

	* doc/bison.texi (Shift/Reduce): here.
	Make "win" and "lose" action more alike.

2012-11-22  Akim Demaille  <akim@lrde.epita.fr>

	doc: formatting changes
	* doc/bison.texi: Use @group.

2012-11-14  Akim Demaille  <akim@lrde.epita.fr>

	scanner: use explicit "ignore" statements
	* src/scan-gram.l: here.

2012-11-12  Theophile Ranquet  <ranquet@lrde.epita.fr>

	tests: close files in glr-regression
	* tests/glr-regression.at: Here.

2012-11-12  Theophile Ranquet  <ranquet@lrde.epita.fr>

	xml: match DOT output and xml2dot.xsl processing
	Make the DOT produced by XSLT processing equivalent to the one made with the
	--graph option.

	* data/xslt/xml2dot.xsl: Stylistic changes, and add support for reductions.
	* doc/bison.texi (Xml): Update.
	* src/graphviz.c (conclude_red): Minor stylistic changes to DOT internals.
	(output_red): Swap enabled and disabled reductions output, for coherence
	with XSLT output.
	* src/print_graph.c (print_core): Minor stylistic change to States' output.
	(print_actions): Swap order of output for reductions and transitions.
	* tests/local.at (AT_BISON_CHECK_XML): Ignore differences in order.
	* tests/output.at: Adjust to changes in DOT internals.

2012-11-12  Theophile Ranquet  <ranquet@lrde.epita.fr>

	xml: factor xslt space template
	* data/xslt/bison.xsl (space): New, import from...
	* data/xslt/xml2text.xsl: Here.

2012-11-12  Theophile Ranquet  <ranquet@lrde.epita.fr>

	graph: fix a memory leak
	* src/graphviz.c (output_red): Here.

2012-11-12  Theophile Ranquet  <ranquet@lrde.epita.fr>

	xml: documentation
	The XML output combined with the XSL Transformations provided in data/ are
	incredibly useful, they should be documented.

	* doc/bison.texi (Xml): New node.

2012-11-12  Theophile Ranquet  <ranquet@lrde.epita.fr>

	output: capitalize State
	* src/print.c (print_state): Here.
	* tests/conflicts.at, tests/existing.at, tests/local.at, tests/reduce.at,
	tests/regression.at, tests/sets.at: Adjust.

2012-11-12  Akim Demaille  <akim@lrde.epita.fr>

	maint: address syntax-check errors.
	* cfg.mk: Ignore the "error" call in tests/c++.at, it is not to be
	translated.
	* doc/bison.texi: Fix incorrect @pxref use.
	* po/POTFILES.in: Add missing file.
	* src/print_graph.c: Remove useless include.

2012-11-12  Akim Demaille  <akim@lrde.epita.fr>

	tests: use valgrind where appropriate
	Reported by Théophile Ranquet.

	* cfg.mk (sc_at_parser_check): New.
	* tests/c++.at: Fix use of AT_CHECK vs. AT_PARSER_CHECK.

2012-11-12  Akim Demaille  <akim@lrde.epita.fr>

	Merge remote-tracking branch 'origin/branch-2.6' into maint
	* origin/branch-2.6:
	  tests: use valgrind where appropriate
	  tests: don't expect $EGREP to support -w

2012-11-10  Akim Demaille  <akim@lrde.epita.fr>

	tests: use valgrind where appropriate
	Reported by Théophile Ranquet.

	* tests/glr-regression.at: Rewrite some test cases so that AT_PARSER_CHECK,
	which runs valgrind, is exposed with the parser, not with "echo".
	* tests/local.at, tests/regression.at, tests/headers.at:
	Use AT_PARSER_CHECK for generated parsers.

2012-11-08  Akim Demaille  <akim@lrde.epita.fr>

	tests: don't expect $EGREP to support -w
	Does not work on Solaris 10.  Reported by Dennis Clarke.
	http://lists.gnu.org/archive/html/bug-bison/2012-11/msg00009.html
	* tests/headers.at (Several parsers): Use Perl instead.
	While at it, run it only once, on all the generated headers.
	Adjust to YY_NULL be defined in position.hh.

2012-11-08  Akim Demaille  <akim@lrde.epita.fr>

	tests: more possible error compiler messages for "#error"
	* tests/synclines.at (AT_SYNCLINES_COMPILE): Adjust for Clang.
	Verified with GCC 4.0, 4.2 to 4.8, and Clang 2.9, 3.2: none skip.

2012-11-08  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-11-08  Akim Demaille  <akim@lrde.epita.fr>

	Merge branch 'branch-2.6' into maint
	* origin/branch-2.6:
	  maint: post-release administrivia
	  version 2.6.5
	  regen
	  tests: syntax-check
	  tests: beware of compilers that do not support POSIXLY_CORRECT
	  gnulib: update

2012-11-07  Akim Demaille  <akim@lrde.epita.fr>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

2012-11-07  Akim Demaille  <akim@lrde.epita.fr>

	version 2.6.5
	* NEWS: Record release date.

2012-11-07  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-11-07  Akim Demaille  <akim@lrde.epita.fr>

	tests: syntax-check
	* tests/actions.at: Fix typo.

2012-11-07  Akim Demaille  <akim@lrde.epita.fr>

	tests: beware of compilers that do not support POSIXLY_CORRECT
	Running "maintainer-release-check" on OS X with Clang 2.9 fails,
	because "clang-mp-2.9 -o test -g test.c" launches "/usr/bin/dsymutil
	test -o test.dSYM" which fails with "error: unable to open executable
	'-o'".

	* m4/c-working.m4 (BISON_CHECK_WITH_POSIXLY_CORRECT)
	(BISON_C_COMPILER_POSIXLY_CORRECT): New.
	* configure.ac: Use the latter.
	* tests/atlocal.in (POSIXLY_CORRECT_IS_EXPORTED): New.
	* tests/local.at (AT_BISON_CHECK_WARNINGS_): Use it instead of computing its
	value each time.
	(AT_QUELL_VALGRIND): Skip tests that cannot work because of compilers
	that do not support POSIXLY_CORRECT.

2012-11-07  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-11-06  Akim Demaille  <akim@lrde.epita.fr>

	Merge branch 'branch-2.6' into maint
	* origin/branch-2.6: (24 commits)
	  tests: calc: modernize the use of locations
	  tests: remove useless location initializations
	  lalr1.cc: always initialize yylval.
	  tests: check that C and C++ objects can be linked together.
	  yacc.c: also disable -Wuninitialized.
	  glr.cc, yacc.c: initialize yylloc properly
	  yacc.c, glr.c: a better YY_LOCATION_PRINT
	  yacc.c: simplify initialization
	  doc: formatting changes
	  c++: fix position operator signatures
	  tests: remove useless location initialization.
	  tests: fix locations in C
	  tests: handle %parse-param in the generated yyerror
	  tests: simplifications
	  grammars: fix display of nul character in error message
	  tests: sort
	  tests: cosmetic changes
	  comment changes
	  autoconf: update
	  gnulib: update
	  ...

2012-11-06  Akim Demaille  <akim@lrde.epita.fr>

	tests: calc: modernize the use of locations
	* tests/calc.at: Don't initialize the location, let the parser
	do it.
	Use a $printer.
	Change some testing input to be easier to distinguish (instead of always
	"0 0" for instance).

2012-11-06  Akim Demaille  <akim@lrde.epita.fr>

	tests: remove useless location initializations
	* tests/actions.at, tests/calc.at: here.

2012-11-06  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: always initialize yylval.
	* data/lalr1.cc: here.

2012-11-06  Akim Demaille  <akim@lrde.epita.fr>

	tests: check that C and C++ objects can be linked together.
	* tests/local.at (AT_SKIP_IF_CANNOT_LINK_C_AND_CXX): New.
	* tests/headers.at (Several parsers): Use it.

2012-11-06  Akim Demaille  <akim@lrde.epita.fr>

	yacc.c: also disable -Wuninitialized.
	* data/yacc.c (YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN): For some versions
	of GCC, -Wmaybe-uninitialized alone does not suffice.

2012-11-06  Akim Demaille  <akim@lrde.epita.fr>

	glr.cc, yacc.c: initialize yylloc properly
	There are several issues to address here.  One is that yylloc should
	be initialized when possible.  Another is that the push parser needs
	to update yypushed_loc when the user modified it.  And if the parser
	starts by a reduction of an empty, it uses the first location on the
	stack, which, therefore, must also be initialized to this initial
	location.

	This is getting complex, especially since because initializing a
	global (impure interface) is different from initializing a local
	variable.  To simplify, the local yylloc is not initialized during its
	definition.

	* data/c.m4 (b4_yyloc_default_define): Replace by...
	(b4_yyloc_default): this.
	Adjust dependencies.
	* data/glr.cc: Initialize yylloc.
	* data/yacc.c (b4_declare_scanner_communication_variables):
	Initialize yylloc during its definition.
	Don't define yyloc_default.
	(yypush_parse): The location formal is not const, as we might
	initialize it.
	(yyparse): Define yyloc_default.
	Use it before running the user initial action.
	Possibly update the first location on the stack, and the pushed
	location after the user initial action.
	* tests/actions.at (Initial locations): Check that the initial
	location is correct.

2012-11-06  Akim Demaille  <akim@lrde.epita.fr>

	yacc.c, glr.c: a better YY_LOCATION_PRINT
	* data/c.m4 (b4_yy_location_print_define): New.
	Now issues "short" locations, e.g., "1.1" instead of "1.1-1.1".
	Was initially a function, but then we face "static but unused"
	warnings.
	Simpler as a macro.
	* tests/local.at, data/glr.c, data/yacc.c: Use it instead of duplicating.
	* tests/actions.at: Adjust expectations.

2012-11-06  Akim Demaille  <akim@lrde.epita.fr>

	yacc.c: simplify initialization
	* data/yacc.c: Fuse the initializations of yyssp, yyss and the like.
	Remove an obsolete comment: we do initialize these initial stack
	members (in some cases).

2012-11-05  Akim Demaille  <akim@lrde.epita.fr>

	doc: formatting changes
	* doc/bison.texi: In a pointer type.

2012-11-05  Akim Demaille  <akim@lrde.epita.fr>

	c++: fix position operator signatures
	* data/location.cc (operator+=, operator-=): Remove const from return
	type.

2012-11-05  Akim Demaille  <akim@lrde.epita.fr>

	tests: remove useless location initialization.
	* tests/glr-regression.at: here.
	glr.c does initialize yylloc.

2012-11-05  Akim Demaille  <akim@lrde.epita.fr>

	tests: fix locations in C
	* tests/local.at (AT_YYERROR_DEFINE): Don't display the end of the location
	if it is not after its beginning.
	* tests/actions.at, tests/cxx-type.at: Adjust the expected output.

2012-11-05  Akim Demaille  <akim@lrde.epita.fr>

	tests: handle %parse-param in the generated yyerror
	* tests/local.at (AT_PARSE_PARAMS): New.
	(AT_YYERROR_FORMALS, AT_YYERROR_DEFINE): Use it to add the parse-param
	to yyerror.
	* tests/calc.at, tests/regression.at: Use AT_YYERROR_DEFINE and
	AT_YYERROR_DECLARE, now that they handle properly the parse-params.
	Be sure to let AT_BISON_OPTION_PUSHDEFS now what parse-params are used.

2012-11-05  Akim Demaille  <akim@lrde.epita.fr>

	tests: simplifications
	* tests/actions.at (Exotic Dollars): Formatting changes.
	Use AT_FULL_COMPILE.
	(AT_CHECK_PRINTER_AND_DESTRUCTOR): Remove useless initialization of @$.

2012-11-01  Akim Demaille  <akim@lrde.epita.fr>

	grammars: fix display of nul character in error message
	Reported by Marc Mendiola.
	http://lists.gnu.org/archive/html/help-bison/2012-10/msg00017.html

	* gnulib: Update to get quote_mem.
	* src/scan-gram.l: Use it.
	* tests/input.at (Invalid inputs): Additional checks.
	* tests/named-refs.at: Likewise.

2012-11-01  Akim Demaille  <akim@lrde.epita.fr>

	tests: sort
	* tests/regression.at (Invalid inputs, Invalid inputs with {}): Move to...
	* tests/input.at: here, for consistency.

2012-11-01  Akim Demaille  <akim@lrde.epita.fr>

	tests: cosmetic changes
	* tests/actions.at (AT_CHECK_PRINTER_AND_DESTRUCTOR): Improve the
	displayed title.

2012-11-01  Akim Demaille  <akim@lrde.epita.fr>

	comment changes
	* data/lalr1.cc: here.

2012-11-01  Akim Demaille  <akim@lrde.epita.fr>

	autoconf: update
	There are comment changes only in the files we use.

2012-11-01  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-10-28  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-10-28  Akim Demaille  <akim@lrde.epita.fr>

	yacc.c: initialize yylval and yylloc.
	When generating a pure push parser, the initialization of yylval and
	yylloc may not be visible to the compiler.  With warnings enabled, GCC
	4.3.6, 4.4.7, 4.5.4, and 4.6.3 report uninitialized uses of
	yylval/yylloc.  Using local pragmas to disable these warnings is not
	supported before 4.6, and 4.6 does not support it properly.  So
	initialize yylval and yylloc at their definition.  Reported by Peter
	Simons.  See
	http://lists.gnu.org/archive/html/bison-patches/2012-10/msg00133.html

	* data/c.m4 (b4_yyloc_default_define): New.
	* data/yacc.c: Use it when locations are requested.
	(YYLVAL_INITIALIZE): Replace by...
	(YY_INITIAL_VALUE): this.
	(yyparse): Initialize yylloc and yylval.
	Therefore, remove the initialization of yylloc's field.
	* data/glr.c: Likewise.

2012-10-26  Akim Demaille  <akim@lrde.epita.fr>

	Merge branch 'branch-2.6' into maint
	* origin/branch-2.6:
	  regen
	  yacc.c: do not define location support when not using locations
	  maint: be compilable with GCC 4.0
	  tests: address a warning from GCC 4.4
	  tests: don't use options that Clang does not support
	  tests: restore the tests on -Werror
	  regen
	  parse-gram: update the Bison interface
	  fix comment

2012-10-26  Akim Demaille  <akim@lrde.epita.fr>

	doc: minor style change
	* doc/figs/example-reduce.txt: here.

2012-10-26  Akim Demaille  <akim@lrde.epita.fr>

	maint: use gendocs's new -I option
	* gnulib: Update gendocs.
	* cfg.mk (gendocs_options_): New.

2012-10-26  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-10-26  Akim Demaille  <akim@lrde.epita.fr>

	yacc.c: don't use _Pragma GCC diagnostic with 4.6
	Reported by Peter Simons.
	http://lists.gnu.org/archive/html/bug-bison/2012-10/msg00033.html

	* data/yacc.c (b4_declare_scanner_communication_variables): 4.7
	seems fine though.

2012-10-26  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-10-26  Akim Demaille  <akim@lrde.epita.fr>

	yacc.c: do not define location support when not using locations
	* data/yacc.c (YYLLOC_DEFAULT, YYRHSLOC): Don't define when not
	using locations.

2012-10-26  Akim Demaille  <akim@lrde.epita.fr>

	maint: be compilable with GCC 4.0
	The "shadows a global declaration" warning in GCC 4.0 was a bit
	annoying.  It does not like that a type name be used in a prototype of
	a function (not the implementation, just the declaration):

	  In file included from src/LR0.c:38:
	  src/reader.h:56: warning: declaration of 'named_ref' shadows a
	                            global declaration
	  src/named-ref.h:35: warning: shadowed declaration is here

	It does not like either when a global variable name is used in a
	prototype.  Flex 2.5.37 generates this prototype:

	  void gram_set_debug (int debug_flag  );

	* src/getargs.h, src/getargs.c (debug_flag): Rename as...
	(debug): this.
	Adjust dependencies.
	* src/reader.h: Don't use "named_ref" as a formal argument name.

2012-10-25  Akim Demaille  <akim@lrde.epita.fr>

	tests: address a warning from GCC 4.4
	236. torture.at:465: testing Exploding the Stack Size with Alloca ...
	../../../tests/torture.at:474: bison -o input.c input.y
	../../../tests/torture.at:474: $CC $CFLAGS $CPPFLAGS $LDFLAGS -o input input.c $LIBS
	stderr:
	cc1: warnings being treated as errors
	input.y: In function 'main':
	input.y:60: error: 'status' may be used uninitialized in this function

	* tests/torture.at (AT_DATA_STACK_TORTURE): Initial status to avoid
	the previous error.

2012-10-25  Akim Demaille  <akim@lrde.epita.fr>

	tests: don't use options that Clang does not support
	* configure.ac (WARN_CFLAGS, WARN_CXXFLAGS): Do not include options
	that Clang does not support.

2012-10-25  Akim Demaille  <akim@lrde.epita.fr>

	tests: restore the tests on -Werror
	When run as /bin/sh, Bash sets the shell variable POSIXLY_CORRECT to
	y.  The test suite checks for the envvar POSIXLY_CORRECT to turn of
	some tests not supported in POSIX mode.  Restore these tests.

	Reported by the Hydra build farm, from Rob Vermaas.

	* tests/local.at (AT_BISON_CHECK_WARNINGS_): Check the envvar
	POSIXLY_CORRECT, not the shell variable.

2012-10-25  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-10-25  Akim Demaille  <akim@lrde.epita.fr>

	parse-gram: update the Bison interface
	* src/parse-gram.y (%pure-parser, %name-prefix): Replace with...
	(%define api.pure, %define api.prefix)
	* src/location.h, src/scan-gram.h: Adjust to api.prefix.

2012-10-25  Akim Demaille  <akim@lrde.epita.fr>

	fix comment
	* data/c.m4 (b4_YYDEBUG_define): here.

2012-10-23  Akim Demaille  <akim@lrde.epita.fr>

	Merge branch 'branch-2.6' into maint
	* origin/branch-2.6:
	  maint: post-release administrivia
	  version 2.6.4
	  regen
	  2.6.4: botched 2.6.3

2012-10-23  Akim Demaille  <akim@lrde.epita.fr>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

2012-10-23  Akim Demaille  <akim@lrde.epita.fr>

	version 2.6.4
	* NEWS: Record release date.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	2.6.4: botched 2.6.3
	* NEWS: here.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	Merge branch '2.6.3' into maint
	* 2.6.3: (22 commits)
	  maint: post-release administrivia
	  version 2.6.3
	  gnulib: update
	  tests: check %no-lines
	  NEWS: warnings with clang
	  warnings: avoid warnings from clang
	  tests: no longer disable -O compiler options
	  yacc.c: initialize yylval in pure-parser mode
	  skeletons: style changes
	  tests: minor improvements
	  tests: use $PERL instead of perl
	  build: look for Perl in configure.
	  tests: fix sed portability issues
	  tests: diff -u is not portable
	  maint: word changes
	  lalr1.cc: fix test suite portability
	  maint: fix an erroneous include
	  tests: check that headers are self contained
	  doc: add missing documentation for --report
	  headers: move CPP guards into YY_*_INCLUDED to avoid collisions
	  ...

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	version 2.6.3
	* NEWS: Record release date.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: check %no-lines
	* tests/synclines.at: here.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	NEWS: warnings with clang
	* NEWS: here.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	warnings: avoid warnings from clang
	Fix the following warning

	  parse-gram.c:2078:14: error: equality comparison with extraneous parentheses
	                        [-Werror,-Wparentheses-equality]
	    if (((yyn) == (-91)))
	         ~~~~~~^~~~~~~~
	  parse-gram.c:2078:14: note: remove extraneous parentheses around the
	                        comparison to silence this warning
	    if (((yyn) == (-91)))
	        ~      ^       ~
	  parse-gram.c:2078:14: note: use '=' to turn this equality comparison into
	                        an assignment
	    if (((yyn) == (-91)))
	               ^~
	               =
	  1 error generated.

	and the following one:

	  input.cc:740:1: error: function declared 'noreturn' should not return
	                         [-Werror,-Winvalid-noreturn]
	  static void yyMemoryExhausted (yyGLRStack* yystackp)
	    __attribute__ ((__noreturn__));
	  static void
	  yyMemoryExhausted (yyGLRStack* yystackp)
	  {
	    YYLONGJMP (yystackp->yyexception_buffer, 2);
	  }
	  ^
	  1 warning and 1 error generated.

	This is Apple clang version 3.1 (tags/Apple/clang-318.0.61).

	* data/c.m4 (b4_table_value_equals): Use (!!(A == B)) instead of (A == B)
	to avoid this warning.
	Any reasonable compiler should generate the same code.
	* src/uniqstr.h (UNIQSTR_EQ): Likewise.
	* data/glr.c (LONGJMP): abort after longjmp to pacify clang.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: no longer disable -O compiler options
	Tests are running without -O since
	f377f69fec28013c79db4efe12bbb9d48987fb2c because some warnings (about
	yylval not being initialized) show only when GCC is given -O2.  The
	previous patch fixes the warnings. Run the test suite with compiler
	options unmodified.

	* tests/atlocal.in (O0CFLAGS, O0CXXFLAGS): Remove, use CFLAGS and
	CXXFLAGS.

2012-10-22  Paul Eggert  <eggert@cs.ucla.edu>

	yacc.c: initialize yylval in pure-parser mode
	See http://lists.gnu.org/archive/html/bison-patches/2012-08/msg00024.html
	(spreading over September and October).

	* data/yacc.c (YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN)
	(YY_IGNORE_MAYBE_UNINITIALIZED_END, YYLVAL_INITIALIZE):
	New macros.  Use them to suppress an unwanted GCC diagnostic.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	skeletons: style changes
	* data/yacc.c, data/glr.c: Prefer Title case for (CPP) macro arguments.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: minor improvements
	* tests/c++.at: Space changes.
	Use AT_YYERROR_DEFINE.
	* tests/local.at (AT_YYERROR_DEFINE): Issue errors on unknown languages.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: use $PERL instead of perl
	* tests/atlocal.in (PERL): New.
	Sort.
	* tests/calc.at, tests/input.at, tests/local.at, tests/regression.at,
	* tests/skeletons.at, tests/synclines.at, tests/torture.at: here.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	build: look for Perl in configure.
	Bison uses "/usr/bin/perl" or "perl" in several places, and it does
	not appear to be a problem.  But, at least to make it simpler to
	change PERL on the make command line, check for perl in configure.

	* configure.ac (PERL): New.
	* doc/Doxyfile.in, doc/Makefile.am, tests/bison.in: Use it.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: fix sed portability issues
	Reported by Didier Godefroy,
	<http://lists.gnu.org/archive/html/bug-bison/2012-10/msg00005.html>.

	* tests/calc.at (AT_CHECK_SPACES): Use Perl.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: diff -u is not portable
	Reported by Didier Godefroy
	<http://lists.gnu.org/archive/html/bug-bison/2012-10/msg00006.html>.

	* tests/existing.at (AT_LALR1_DIFF_CHECK): Skip if diff -u does not
	work.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	maint: word changes
	* README-hacking (Typical errors): Improve wording.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: fix test suite portability
	Reported by Rob Vermaas' Hydra build farm on x86_64-darwin 10.2.0 with
	G++ 4.6.3.

	* tests/headers.at (Several parsers): Include AT_DATA_SOURCE_PROLOGUE
	in the files to compile.
	* data/location.cc: Do not include twice string and iostream (once
	by position.hh, and then by location.hh).
	* README-hacking (Typical errors): Some hints for other maintainers.

2012-10-22  Theophile Ranquet  <theophile.ranquet@gmail.com>

	maint: fix an erroneous include
	This fixes test 130 (Several parsers).

	* data/location.cc: Include <iostream> rather than <iosfwd> since
	we really need << on strings for instance.
	* NEWS: Document this.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: check that headers are self contained
	Reported by Alexandre Duret-Lutz.

	* tests/headers.at (Several parsers): here.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	doc: add missing documentation for --report
	* doc/bison.texi (Bison Options): Document --report's "solved", "all",
	and "none".

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	headers: move CPP guards into YY_*_INCLUDED to avoid collisions
	See <http://lists.gnu.org/archive/html/bug-bison/2012-09/msg00016.html>.

	* data/c.m4 (b4_cpp_guard): Prepend YY_ and append _INCLUDED.
	* tests/headers.at: Adjust.
	* NEWS, doc/bison.texi: Document.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	minor changes.
	* NEWS: Word changes.
	* doc/bison.texi: Spell check.
	Fix minor issues.
	* tests/headers.at: Comment and formatting changes.

2012-10-22  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-10-19  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-10-19  Akim Demaille  <akim@lrde.epita.fr>

	xml: slight improvement of the DOT output
	This was completely forgotten...  Nothing about XML is actually
	documented...

	* data/xslt/xml2dot.xsl: Use boxes, and Courier font.

2012-10-19  Akim Demaille  <akim@lrde.epita.fr>

	maint: check for dot before using it
	* configure.ac: here.
	* doc/Makefile.am: Use $(DOT).
	Ship the generated files, to spare the user the need for Graphviz.

2012-10-18  Theophile Ranquet  <theophile.ranquet@gmail.com>

	graphs: documentation
	Note that 'make web-manual' fails.

	* NEWS: Document these changes.
	* doc/Makefile.am: Adjust to generate example files.
	* doc/bison.texi: Add a Graphviz section after "Understanding::", the section
	describing the .output file, because these are similar.
	* doc/figs/example-reduce.dot, doc/figs/example-reduce.txt,
	doc/figs/example-shift.dot, doc/figs/example-shift.txt: New, minimal
	examples to illustrate the documentation.

2012-10-18  Theophile Ranquet  <theophile.ranquet@gmail.com>

	graphs: add tests, introducing -k graph
	* tests/output.at (AT_TEST): New.
	Use it to add 6 --graph tests.

2012-10-18  Theophile Ranquet  <theophile.ranquet@gmail.com>

	graphs: change the output format of the rules
	Use something similar to the report file.

	* src/print_graph.c (print_lhs): New, obstack equivalent of rule_lhs_print.
	(print_core): Use here.

2012-10-18  Theophile Ranquet  <theophile.ranquet@gmail.com>

	graphs: style changes
	* src/graphviz.c (start_graph): Use courier font.
	(conclude_red): Use commas to separate attributes. Show the acceptation
	as a special reduction, with a blue color and an "Acc" label. Show the
	lookahead tokens between square brackets.
	(output_red): No longer label default reductions.
	* src/print_graph.c (print_core): Refactor spacing, and print an
	additional space between a rule's rhs and its lookahead tokens. Also,
	capitalize "State".
	(print_actions): Style, move a declaration.

2012-10-18  Theophile Ranquet  <theophile.ranquet@gmail.com>

	graphs: address an issue with R/R conflicts
	All disabled reductions should now be shown as such.

	* src/graphviz.c (output_red): Here.
	(conclude_red): New.

2012-10-16  Akim Demaille  <akim@lrde.epita.fr>

	java: fixes
	* data/java.m4: Remove stray M4 characters.

2012-10-12  Akim Demaille  <akim@lrde.epita.fr>

	java: use api.location.type and api.position.type
	* data/java.m4: here.
	* NEWS, doc/bison.texi, tests/java.at: Adjust.

2012-10-12  Akim Demaille  <akim@lrde.epita.fr>

	tests: check %no-lines
	* tests/synclines.at: here.

2012-10-12  Akim Demaille  <akim@lrde.epita.fr>

	tests: minor simplification
	* tests/headers.at (Several parsers): Use *.y even for C++.

2012-10-11  Akim Demaille  <akim@lrde.epita.fr>

	graphs: stylistic changes.
	* src/graphviz.c (output_red): Comment and formatting changes.

2012-10-11  Theophile Ranquet  <ranquet@lrde.epita.fr>

	graphs: minor style changes
	* src/graphviz.c (output_red): Fix C90 issues.
	Reduce variable scopes.

2012-10-11  Theophile Ranquet  <ranquet@lrde.epita.fr>

	graphs: show reductions
	* src/graphviz.c (output_red): New, show reductions on the graph.
	(no_reduce_bitset_init): New, initialize a bitset.
	(print_token): New, print a lookahead token.
	(escape): New, print "foo" as \"foo\" because Dot doesn't like quotes within
	a label.

	* src/graphviz.h : Adjust.
	* src/print_graph.c (print_actions): Call output_red here.

2012-10-11  Theophile Ranquet  <theophile.ranquet@gmail.com>

	graphs: style: prefix state number with "state"
	* src/print_graph.c (print_core): Here.

2012-10-11  Theophile Ranquet  <ranquet@lrde.epita.fr>

	graphs: style: use left justification for states
	The label text of nodes is centered "by default" (by the use of '\n' as
	a line feed). This gives bad readability to the grammar rules shown in
	state nodes, a left justification is much nicer. This is done by using '\l'
	as the line feed.

	In order to allow \l in the DOT file, changes to the quoting system seem
	necessary.

	* src/print_graph.c (print_core): Escape tokens here, instead of...
	* src/graphviz.c (output_node): Here...
	(escape): Using this, new.

2012-10-11  Theophile Ranquet  <theophile.ranquet@gmail.com>

	graphs: style: prefix rules and change shapes
	* src/graphviz.c (start_graph): Use box rather than ellipsis.
	* src/print_graph.c (print_core): Prefix rules with their number.

2012-10-11  Theophile Ranquet  <theophile.ranquet@gmail.com>

	obstack: import obstack_finish0 from master
	* src/system.h (obstack_finish0): New.

2012-10-09  Akim Demaille  <akim@lrde.epita.fr>

	c++: api.location.type
	This feature was introduced in 95a2de5695670ae0df98cb3c42141cad549f0204
	(which is part of 2.5), but not documented.  Give it a proper name, and
	make it public.

	* data/c++.m4, data/lalr1.cc, data/glr.cc, data/java.m4: Use
	api.location.type instead of location_type.
	* src/muscle-tab.c (muscle_percent_variable_update): Map the latter to
	the former.
	* tests/local.at: Adjust.
	* tests/calc.at: Use api.location.type.
	Leave tests/java.at with location_type, at least for the time being,
	to cover both names.
	* doc/bison.texi: Document api.location.type.
	(User Defined Location Type): New.
	* NEWS: Update.

2012-10-09  Akim Demaille  <akim@lrde.epita.fr>

	muscles: a function for backward compatibility
	Based on commit 171ad99d6421935a278656be6dc7161591835d00 from master.

	* src/muscle-tab.c (muscle_percent_variable_update): New.
	(muscle_percent_define_insert): Use it.
	Define the variables with their initial value.

2012-10-09  Akim Demaille  <akim@lrde.epita.fr>

	maint: more macros
	* src/output.c (ARRAY_CARDINALITY): Move to...
	* src/system.h: here.
	(STREQ, STRNEQ): new.

2012-10-08  Akim Demaille  <akim@lrde.epita.fr>

	NEWS: warnings with clang
	* NEWS: here.

2012-10-08  Akim Demaille  <akim@lrde.epita.fr>

	warnings: avoid warnings from clang
	Fix the following warning

	  parse-gram.c:2078:14: error: equality comparison with extraneous parentheses
	                        [-Werror,-Wparentheses-equality]
	    if (((yyn) == (-91)))
	         ~~~~~~^~~~~~~~
	  parse-gram.c:2078:14: note: remove extraneous parentheses around the
	                        comparison to silence this warning
	    if (((yyn) == (-91)))
	        ~      ^       ~
	  parse-gram.c:2078:14: note: use '=' to turn this equality comparison into
	                        an assignment
	    if (((yyn) == (-91)))
	               ^~
	               =
	  1 error generated.

	and the following one:

	  input.cc:740:1: error: function declared 'noreturn' should not return
	                         [-Werror,-Winvalid-noreturn]
	  static void yyMemoryExhausted (yyGLRStack* yystackp)
	    __attribute__ ((__noreturn__));
	  static void
	  yyMemoryExhausted (yyGLRStack* yystackp)
	  {
	    YYLONGJMP (yystackp->yyexception_buffer, 2);
	  }
	  ^
	  1 warning and 1 error generated.

	This is Apple clang version 3.1 (tags/Apple/clang-318.0.61).

	* data/c.m4 (b4_table_value_equals): Use (!!(A == B)) instead of (A == B)
	to avoid this warning.
	Any reasonable compiler should generate the same code.
	* src/uniqstr.h (UNIQSTR_EQ): Likewise.
	* data/glr.c (LONGJMP): abort after longjmp to pacify clang.

2012-10-08  Akim Demaille  <akim@lrde.epita.fr>

	tests: no longer disable -O compiler options
	Tests are running without -O since
	f377f69fec28013c79db4efe12bbb9d48987fb2c because some warnings (about
	yylval not being initialized) show only when GCC is given -O2.  The
	previous patch fixes the warnings. Run the test suite with compiler
	options unmodified.

	* tests/atlocal.in (O0CFLAGS, O0CXXFLAGS): Remove, use CFLAGS and
	CXXFLAGS.

2012-10-08  Paul Eggert  <eggert@cs.ucla.edu>

	yacc.c: initialize yylval in pure-parser mode
	See http://lists.gnu.org/archive/html/bison-patches/2012-08/msg00024.html
	(spreading over September and October).

	* data/yacc.c (YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN)
	(YY_IGNORE_MAYBE_UNINITIALIZED_END, YYLVAL_INITIALIZE):
	New macros.  Use them to suppress an unwanted GCC diagnostic.

2012-10-08  Akim Demaille  <akim@lrde.epita.fr>

	skeletons: style changes
	* data/yacc.c, data/glr.c: Prefer Title case for (CPP) macro arguments.

2012-10-06  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: document exception safety
	* NEWS: here.
	* doc/bison.texi (Destructor Decl, C++ Parser Interface): and there.

2012-10-06  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: check exception safety of error handling
	* tests/c++.at (Exception safety): Don't use swap here, it
	is useless.
	Cover more test cases: yyerror, YYERROR, YYABORT, and
	error recovery.
	(Object): Instead of just keeping a counter of instances, keep
	a list of them.

2012-10-06  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: check (and fix) %printer exception safety
	* tests/c++.at (Exception safety): Let the parser support the --debug
	option.
	On 'p', throw an exception from the %printer.
	* data/lalr1.cc (yyparse): Do not display the values we discard, as it
	uses %printer, which might have thrown the exception.

2012-10-06  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: check (and fix) %initial-action exception safety
	* data/lalr1.cc: Check size > 1, rather than size != 1, when cleaning
	the stack, as at the beginning, size is 0.
	* tests/c++.at (Exception safety): Check exception safety in
	%initial-action.

2012-10-06  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: fix exception safety
	lalr1.cc does not reclaim its memory when ended by an exception.

	Reported by Oleksii Taran:
	http://lists.gnu.org/archive/html/help-bison/2012-09/msg00000.html

	* data/lalr1.cc (yyparse): Protect the whole yyparse by a try-catch
	block that cleans the stack and the lookahead.

2012-10-06  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: check exception safety.
	* tests/c++.at (Exception safety): New.

2012-10-06  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: indentation fixes.
	* data/lalr1.cc (yyparse): here.
	Untabify a block of code.

2012-10-06  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: don't leave macros define to nothing
	* data/lalr1.cc (YY_SYMBOL_PRINT, YY_REDUCE_PRINT, YY_STACK_PRINT):
	Define to something so that, for instance, "if (foo) YY_SYMBOL_PRINT"
	is valid even when !YYDEBUG.

2012-10-06  Akim Demaille  <akim@lrde.epita.fr>

	tests: minor improvements
	* tests/c++.at: Space changes.
	Use AT_YYERROR_DEFINE.
	* tests/local.at (AT_YYERROR_DEFINE): Issue errors on unknown languages.

2012-10-05  Akim Demaille  <akim@lrde.epita.fr>

	tests: use $PERL instead of perl
	* tests/atlocal.in (PERL): New.
	Sort.
	* tests/calc.at, tests/input.at, tests/local.at, tests/regression.at,
	* tests/skeletons.at, tests/synclines.at, tests/torture.at: here.

2012-10-05  Akim Demaille  <akim@lrde.epita.fr>

	build: look for Perl in configure.
	Bison uses "/usr/bin/perl" or "perl" in several places, and it does
	not appear to be a problem.  But, at least to make it simpler to
	change PERL on the make command line, check for perl in configure.

	* configure.ac (PERL): New.
	* doc/Doxyfile.in, doc/Makefile.am, tests/bison.in: Use it.

2012-10-05  Akim Demaille  <akim@lrde.epita.fr>

	tests: fix sed portability issues
	Reported by Didier Godefroy,
	<http://lists.gnu.org/archive/html/bug-bison/2012-10/msg00005.html>.

	* tests/calc.at (AT_CHECK_SPACES): Use Perl.

2012-10-05  Akim Demaille  <akim@lrde.epita.fr>

	tests: diff -u is not portable
	Reported by Didier Godefroy
	<http://lists.gnu.org/archive/html/bug-bison/2012-10/msg00006.html>.

	* tests/existing.at (AT_LALR1_DIFF_CHECK): Skip if diff -u does not
	work.

2012-10-04  Akim Demaille  <akim@lrde.epita.fr>

	maint: word changes
	* README-hacking (Typical errors): Improve wording.

2012-10-04  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: fix test suite portability
	Reported by Rob Vermaas' Hydra build farm on x86_64-darwin 10.2.0 with
	G++ 4.6.3.

	* tests/headers.at (Several parsers): Include AT_DATA_SOURCE_PROLOGUE
	in the files to compile.
	* data/location.cc: Do not include twice string and iostream (once
	by position.hh, and then by location.hh).
	* README-hacking (Typical errors): Some hints for other maintainers.

2012-10-03  Theophile Ranquet  <theophile.ranquet@gmail.com>

	maint: fix an erroneous include
	This fixes test 130 (Several parsers).

	* data/location.cc: Include <iostream> rather than <iosfwd> since
	we really need << on strings for instance.
	* NEWS: Document this.

2012-10-03  Akim Demaille  <akim@lrde.epita.fr>

	tests: check that headers are self contained
	Reported by Alexandre Duret-Lutz.

	* tests/headers.at (Several parsers): here.

2012-10-03  Akim Demaille  <akim@lrde.epita.fr>

	doc: add missing documentation for --report
	* doc/bison.texi (Bison Options): Document --report's "solved", "all",
	and "none".

2012-10-01  Akim Demaille  <akim@lrde.epita.fr>

	headers: move CPP guards into YY_*_INCLUDED to avoid collisions
	See <http://lists.gnu.org/archive/html/bug-bison/2012-09/msg00016.html>.

	* data/c.m4 (b4_cpp_guard): Prepend YY_ and append _INCLUDED.
	* tests/headers.at: Adjust.
	* NEWS, doc/bison.texi: Document.

2012-10-01  Akim Demaille  <akim@lrde.epita.fr>

	minor changes.
	* NEWS: Word changes.
	* doc/bison.texi: Spell check.
	Fix minor issues.
	* tests/headers.at: Comment and formatting changes.

2012-09-28  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-09-28  Theophile Ranquet  <theophile.ranquet@gmail.com>

	errors: indent "user token number redeclaration" context
	This is the continuation of the work on the readability of errors
	context.

	* src/symtab.c (user_token_number_redeclaration): Use
	complain_at_indent to output with increased indentation level.
	* tests/input:at: Apply this change.

2012-09-26  Theophile Ranquet  <ranquet@lrde.epita.fr>

	warnings: introduce -Wdeprecated in the usage info
	The deprecated warning, introduced some time ago, was not displayed in
	the usage message. This patch addresses the issue.

	* src/getargs.c (usage): Insert here.

2012-09-26  Theophile Ranquet  <ranquet@lrde.epita.fr>

	errors: prefix the output with "error: "
	This improves readability. This is also what gcc does.

	* NEWS: Document this change.
	* src/complain.c (complain_at): Prefix all errors with "error: ".
	(complain_at_indent, warn_at_indent): Do not prefix the context
	information of errors, which are basically just indented errors.
	* tests/conflicts.at, tests/glr-regression.at, tests/input.at,
	tests/named-refs.at, tests/output.at, tests/push.at,
	tests/regression.at, tests/skeletons.at: Apply this change.

2012-09-26  Theophile Ranquet  <ranquet@lrde.epita.fr>

	errors: indent "invalid value for %define" context
	This is the continuation of the work on the readability of errors
	    context.

	For example, what used to be:
	  input.y:1.9-29: invalid value for %define variable 'foo' : 'bar'
	  input.y:1.9-29: accepted value: 'most'

	is now:
	  input.y:1.9-29: invalid value for %define variable 'foo' : 'bar'
	  input.y:1.9-29:     accepted value: 'most'

	* src/muscle-tab.c (muscle_percent_define_check_values): Use
	complain_at_indent to output with increased indentation level.
	* tests/input:at: Apply this change.

2012-09-26  Theophile Ranquet  <ranquet@lrde.epita.fr>

	errors: indent "%define var" redefinition context
	This is the continuation of the work on the readability of errors
	context.

	For example, what used to be:
	  input.y:2.9-11: %define variable 'var' redefined
	  input.y:1.9-11: previous definition

	is now:
	  input.y:2.9-11: %define variable 'var' redefined
	  input.y:1.9-11:     previous definition

	* src/muscle-tab.c (muscle_percent_define_insert): Use
	complain_at_indent to output with increased indentation level.
	* tests/input.at: Apply this change.

2012-09-26  Theophile Ranquet  <ranquet@lrde.epita.fr>

	errors: indent "symbol redeclaration" context
	This is the continuation of the work on the readability of errors
	context.

	For example, what used to be:
	  input.y:5.10-24: %printer redeclaration for <field2>
	  input.y:3.11-25: previous declaration

	is now:
	  input.y:5.10-24: %printer redeclaration for <field2>
	  input.y:3.11-25:     previous declaration

	* NEWS: Document this change.
	* src/symtab.c (symbol_redeclaration, semantic_type_redeclaration,
	user_token_number_redeclaration, default_tagged_destructor_set,
	default_tagless_destructor_set, default_tagged_printer_set,
	default_tagless_printer_set): Use complain_at_indent to
	output with increased indentation level.
	* tests/input.at: Apply this change.

2012-09-26  Theophile Ranquet  <ranquet@lrde.epita.fr>

	errors: indent "result type clash" error context
	This used to be the format of the error report:

	  input.y:6.5-10: result type clash on merge function 'merge': [...]
	  input.y:2.4-9: previous declaration

	In order to distinguish the actual error from the context provided, we
	rather this new output:

	  input.y:6.5-10: result type clash on merge function 'merge': [...]
	  input.y:2.4-9:     previous declaration

	Another patch will introduce an "error: " prefix to all non-indented
	lines, giving yet better readability to the reports.

	* src/complain.h (SUB_INDENT): Move to here.
	* src/reader.c (record_merge_function_type): Use complain_at_indent to
	output with increased indentation level.
	* src/scan-code.l (SUB_INDENT): Remove from here.
	* tests/glr-regression.at: Apply this change.

2012-09-25  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-09-25  Akim Demaille  <akim@lrde.epita.fr>

	yacc: fix handling of CPP guards when no header is generated
	When no header was to be generated, Bison would issue:

	  /* In a future release of Bison, this section will be replaced
	     by #include "".  */
	  #ifndef YY_
	  # define YY_

	It now properly generates nothing.

	* data/c.m4 (b4_cpp_guard_open, b4_cpp_guard_close): Issue nothing when
	the file name is empty.
	* data/yacc.c: Do not generate the above comment when there is no header
	to generate.
	* NEWS: Update.

2012-09-25  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-09-04  Akim Demaille  <akim@lrde.epita.fr>

	maint: remove useless file
	* externals/bootstrap.cfg: Remove.
	This file was used by a specific build system.
	It was added to the master repository by accident.

2012-09-04  Akim Demaille  <akim@lrde.epita.fr>

	update files to ignore
	* doc/.gitignore: Don't ignore split info files as we don't split our
	info file.
	See <http://lists.gnu.org/archive/html/bug-bison/2012-08/msg00006.html>.

2012-09-04  Akim Demaille  <akim@lrde.epita.fr>

	remove useless include
	* src/system.h: Don't include sys/types.h.
	Reported by Eric Blake,
	<http://lists.gnu.org/archive/html/bug-bison/2012-09/msg00002.html>.
	(FUNCTION_PRINT): Remove, unused.

2012-09-03  Jim Meyering  <meyering@redhat.com>

	use locale-indep. c_is* functions for parsing, not isspace, isprint etc
	* src/parse-gram.y: Include "c-ctype.h".
	(add_param): Parse with c_isspace, not isspace.
	* src/parse-gram.c: Likewise.
	* src/scan-gram.l: Include c-ctype.h, not ctype.h.
	(SC_ESCAPED_STRING,SC_ESCAPED_CHARACTER): Use c_isspace and c_isprint,
	not ctype.h's locale-dependent functions.

2012-09-03  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-09-03  Akim Demaille  <akim@lrde.epita.fr>

	--help: include a place to report translation issues
	http://lists.gnu.org/archive/html/bug-bison/2012-08/msg00007.html
	shows that it is useful to help users report translation issues.
	While at it, include other informative bits that the coreutils shows.

	* src/getargs.c (usage): Report more URLs where the user can
	refer to.
	Mostly copied/pasted from coreutils' emit_ancillary_info function.

2012-08-31  Akim Demaille  <akim@lrde.epita.fr>

	tests: style changes
	* tests/torture.at (AT_DATA_STACK_TORTURE): M4 style changes to
	improve readability.
	Fix an assertion which, because of a <= instead of ==, did not check
	new_status as visibly meant.
	(get_args): New.

2012-08-31  Akim Demaille  <akim@lrde.epita.fr>

	tests: fix push-pull test
	* tests/torture.at: %push-pull-parser is no longer supported.

2012-08-31  Akim Demaille  <akim@lrde.epita.fr>

	yacc.c: style changes
	* data/yacc.c: (yytoken): Define with initial value.

2012-08-03  Akim Demaille  <akim@lrde.epita.fr>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

2012-08-03  Akim Demaille  <akim@lrde.epita.fr>

	version 2.6.2
	* NEWS: Record release date.

2012-08-02  Akim Demaille  <akim@lrde.epita.fr>

	NEWS: update.
	* NEWS: Catch up with the other changes from 2.6.1.

2012-08-02  Akim Demaille  <akim@lrde.epita.fr>

	yacc: remove trailing end of line at end of file
	There are still spurious spaces at the end of some lines.  But this is
	addressed in the master branch, and I am reluctant to try to backport
	this.

	* data/yacc.c, data/glr.c, data/lalr1.cc, data/glr.cc: here.
	* tests/calc.at (AT_CHECK_SPACES): New.
	Use it.
	Be sure not to introduce trailing empty lines in the *.y files.
	* NEWS: Doc it.
	* cfg.mk (syntax-check): Remove the exception.

2012-08-02  Akim Demaille  <akim@lrde.epita.fr>

	thanks: fix a contributor name
	* THANKS: On his request.

2012-08-01  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-08-01  Akim Demaille  <akim@lrde.epita.fr>

	tests: synch line -> syncline, for consistency
	* tests/synclines.at: Do it, as "syncline" is used consistently
	everywhere else in Bison.

2012-08-01  Akim Demaille  <akim@lrde.epita.fr>

	tests: synclines: style changes
	* tests/synclines.at (AT_TEST_SYNCLINE): Rename as...
	(AT_TEST): this.
	Use pushdef/popdef.
	Formatting changes.
	Use '+' instead of '*' where appropriate.

2012-08-01  Akim Demaille  <akim@lrde.epita.fr>

	tests: synclines: fix perl invocation
	Reported by Summum Bonum.

	* tests/synclines.at: Fix Perl invocation: its -f is not like sed's.

2012-08-01  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-08-01  Akim Demaille  <akim@lrde.epita.fr>

	c++: trailing end-of-lines in %parse-param
	* src/parse-gram.y (add_param): No only skip ' ' and '\t', skip all
	leading and trailing spaces.
	* tests/regression.at (Lex and parse params): Check it.
	* NEWS: Document it.

2012-08-01  Akim Demaille  <akim@lrde.epita.fr>

	tests: simplify
	* tests/regression.at: Remove useless compilations: AT_FULL_COMPILE
	includes the compilation by bison.

2012-07-31  Akim Demaille  <akim@lrde.epita.fr>

	use obstack_printf
	This is not just nicer, it is also much safer, since we were
	using sprintf...

	* bootstrap.conf: Require it.
	* src/system.h (obstack_fgrow1, obstack_fgrow2, obstack_fgrow3)
	(obstack_fgrow4): Remove.
	Adjust dependencies.

2012-07-30  Akim Demaille  <akim@lrde.epita.fr>

	scanner: restore a missing start condition
	$ flex src/scan-skel.l
	src/scan-skel.l:145: multiple <<EOF>> rules for start condition SC_AT_DIRECTIVE_ARGS
	src/scan-skel.l:145: multiple <<EOF>> rules for start condition SC_AT_DIRECTIVE_SKIP_WS
	This is warning, and it seems there are no means to make it an error.

	* src/scan-skel.l: Restore the start-condition INITIAL for an <<EOF>>
	clause.

2012-07-30  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-07-30  Akim Demaille  <akim@lrde.epita.fr>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

2012-07-30  Akim Demaille  <akim@lrde.epita.fr>

	version 2.6.1
	* NEWS: Record release date.

2012-07-30  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-07-27  Akim Demaille  <akim@lrde.epita.fr>

	maint: fix some syntax-check issues
	* cfg.mk: Nuke the following warnings which are confused by our
	text reports (that state that the error token is number 256).
	  prohibit_magic_number_exit
	  ../../doc/bison.texi:8170:error (256)
	  ../../tests/conflicts.at:570:error (256)
	  ../../tests/conflicts.at:673:error (256)
	  ../../tests/conflicts.at:811:error (256)
	  ../../tests/conflicts.at:1154:error (256)
	  ../../tests/regression.at:281:error (256)
	  ../../tests/regression.at:582:error (256)
	  maint.mk: use EXIT_* values rather than magic number

2012-07-27  Akim Demaille  <akim@lrde.epita.fr>

	tests: do not depend on __cplusplus to decide for C++ or C output
	Since we do support compiling C code with a C++ compiler.

	* tests/actions.at (Qualified $$ in actions): Use AT_SKEL_CC_IF.

2012-07-27  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-07-27  Akim Demaille  <akim@lrde.epita.fr>

	synclines: remove spurious empty line
	* data/bison.m4 (b4_syncline): Do not start with an empty line.

2012-07-27  Akim Demaille  <akim@lrde.epita.fr>

	also support $<foo>$ in the %initial-action
	scan-code.l is already passing argument to b4_dollar_dollar for the
	initial acton, but its definition (of b4_dollar_dollar) does not use
	this argument.

	Generalize this definition, and use it for the %initial-action too.

	* data/c.m4 (b4_dollar_dollar_, b4_dollar_pushdef, b4_dollar_popdef):
	Instead of expecting a pointer, require a value, and use ".".
	Since they are now generic enough, move to...
	* data/c-like.m4: this new file.
	* data/c.m4, data/java.m4: Load it.
	* data/glr.c, data/lalr1.cc, data/lalr1.java, data/yacc.c: Use
	b4_dollar_pushdef for the %initial-action.
	* tests/actions.at: Check that.
	* data/Makefile.am: Adjust.
	* NEWS, doc/bison.texi: Document.

2012-07-27  Akim Demaille  <akim@lrde.epita.fr>

	skeletons: b4_dollar_pushdef and popdef to simpify complex definitions
	M4 is really making it uselessly hard to define macros that define
	macros.
	* data/c.m4 (b4_dollar_pushdef, b4_dollar_popdef): New.
	Use it.

2012-07-27  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-07-27  Akim Demaille  <akim@lrde.epita.fr>

	printer/destructor: translate only once
	Currently "%printer {...} a b c d e f" translates the {...} six times.
	Not only is this bad for time and space, it also issues six times the
	same warnings.

	* src/symlist.h, src/symlist.c (symbol_list_destructor_set)
	(symbol_list_printer_set): Take the action as code_props instead of
	const char *.
	* src/parse-gram.y: Translate these actions here.
	* src/scan-code.h: Comment change.
	* tests/input.at: Check that warnings are issued only once.

2012-07-27  Akim Demaille  <akim@lrde.epita.fr>

	factor the handling of m4 escaping
	The conversion from @ to @@ and so forth is coded is too many
	different places.  Factor, a bit.

	* src/scan-code.l: Instead of duplicating the logic of obstack_escape,
	use it.
	It sure is less efficient, but the cost is negligible.
	This allows to factor rules that are alike.
	And to factor some start-condition clauses.
	* tests/input.at (Stray $ or @): New.
	* NEWS: Document it.

2012-07-27  Akim Demaille  <akim@lrde.epita.fr>

	news: schedule the removal of the ";" hack
	scan-code.l is significantly more complex because of this.

	* NEWS: Doc it.

2012-07-27  Akim Demaille  <akim@lrde.epita.fr>

	style changes in the scanners
	* src/scan-code.l, src/scan-skel.l: Use a more traditional indentation
	style for start-conditions.
	Prefer "continue" to a comment, for empty actions.
	Strip useless {}.
	Remove useless start-condition clauses.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	regen

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	support $<tag>$ in printers and destructors
	* src/scan-code.l (SC_SYMBOL_ACTION): Accept $<tag>$, not just $$.
	* data/c.m4 (b4_dollar_dollar_): New.
	(b4_symbol_actions): Let b4_dollar_dollar use b4_dollar_dollar_.
	* NEWS, doc/bison.texi: Document it.
	* tests/actions.at: Check this for C and C++.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	scan-code: factor the handling of the type in $<TYPE>$
	* src/scan-code.l (fetch_type_name): New.
	(handle_action_dollar): Use it.
	(gt_ptr): Remove, useless.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	muscles: fix another occurrence of unescaped type name
	* src/output.c (quoted_output): Split into...
	(quoted_output, string_output): these.
	Use the former when outputting a type_name.
	* tests/input.at: Check this case.
	* src/symtab.h: Comment changes.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	glr.cc: fix the handling of yydebug
	* data/glr.cc (yydebug_): Remove, unused.
	(set_debug_level, debug_level): Work on yydebug instead.
	* doc/bison.texi, NEWS: Document this.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	formatting changes
	* src/symtab.h: here.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	tests: fix an assertion
	* tests/local.at (AT_YYLEX_DEFINE): Be sure to check the array
	against its length, not its size in bytes.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	tests: adjust to GCC 4.8, which displays caret errors
	With GCC 4.8, the tests on synclines are skipped.  Transform

	  input.y:1:2: error: #error "1"
	   #error "1"
	    ^

	into

	  input.y:1: #error "1"

	* tests/synclines.at (AT_SYNCLINES_COMPILE): Do it, using Perl instead of
	sed.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	be sure to properly escape type names
	* src/scan-code.l: Use obstack_quote when passing type_name to m4.
	* tests/input.at (Code injection): New.
	* NEWS: Document it.
	Thanks to Paul Eggert for the wording.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	obstack_quote: escape and quote for M4
	* src/system.h (obstack_quote): New.
	* src/muscle-tab.c: Use it instead of obstack_escape where applicable.
	* src/scan-code.l: Since obstack_quote supports NULL, leave type_name
	as NULL instead of defaulting to "".

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	muscles: shuffle responsabilities
	* src/muscle-tab.c (muscle_boundary_grow): Be in charge of quotation,
	instead of leaving this to the caller.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	muscles: make private functions static
	* src/muscle-tab.h, src/muscle-tab.c (muscle_boundary_grow)
	(muscle_location_grow): Now static.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	muscles: rename private functions/macros
	* src/muscle-tab.c (MUSCLE_COMMON_DECODE, muscle_string_decode)
	(muscle_location_decode): Not related to muscles, rename as...
	(COMMON_DECODE, string_decode, location_decode): these.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	obstack_escape: escape M4 characters
	* src/muscle-tab.h (MUSCLE_OBSTACK_SGROW): This is not related to
	muscles, so move to, and rename as...
	* src/system.h (obstack_escape): this.
	Adjust dependencies.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	remove dead macro
	* src/system.h (DEFAULT_TMPDIR): Remove, unused.

2012-07-26  Akim Demaille  <akim@lrde.epita.fr>

	maint: style changes
	* src/scan-code.l: Remove useless braces.
	Formatting changes.
	Prefer NULL to 0.
	* src/muscle-tab.c, src/system.h: Formatting changes.

2012-07-24  Akim Demaille  <akim@lrde.epita.fr>

	doc: avoid problems with case insensitive file systems
	makeinfo --html generates index.html, and the node "Index" will result
	in Index.html.  On case insensitive file systems, such as on Mac OS X
	by default, this results in a single, invalid, file (Texinfo 4.13).
	See http://lists.gnu.org/archive/html/bug-texinfo/2012-07/msg00032.html

	* doc/bison.texi (Index): Rename as...
	(Index of Terms): this.

2012-07-24  Stefano Lattarini  <stefano.lattarini@gmail.com>  (tiny change)

	configure: fix botched quoting
	* configure.ac: In the AC_SUBST call on 'VALGRIND_PREBISON'.  Without
	this change, when running ./configure, I see:

	    ...
	    checking for valgrind... valgrind
	    ./configure: line 35221: -q: command not found
	    checking for Java compiler... gcj -C -fsource=1.3 -ftarget=1.4
	    ...

2012-07-20  Akim Demaille  <akim@lrde.epita.fr>

	news: fix typo.
	* NEWS: here.
	Reported by Ben Pfaff.

2012-07-19  Akim Demaille  <akim@lrde.epita.fr>

	maint: update gnu-web-doc-update.
	* gnulib: here.

2012-07-19  Akim Demaille  <akim@lrde.epita.fr>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

2012-07-19  Akim Demaille  <akim@lrde.epita.fr>

	version 2.6
	* NEWS: Record release date.

2012-07-19  Akim Demaille  <akim@lrde.epita.fr>

	maint: prepare for release 2.6
	* NEWS: here.

2012-07-18  Akim Demaille  <akim@lrde.epita.fr>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

2012-07-18  Akim Demaille  <akim@lrde.epita.fr>

	version 2.5.91
	* NEWS: Record release date.

2012-07-18  Akim Demaille  <akim@lrde.epita.fr>

	maint: prepare NEWS.

2012-07-18  Akim Demaille  <akim@lrde.epita.fr>

	maint: fix spaces.
	* build-aux/Makefile.am: here.

2012-07-18  Akim Demaille  <akim@lrde.epita.fr>

	tests: adjust to case where the C compiler is actually a C++ compiler
	* tests/atlocal.in (CC_IS_CXX): New.
	* tests/headers.at (Several parsers): Use it.

2012-07-18  Akim Demaille  <akim@lrde.epita.fr>

	tests: fix dependencies
	* tests/Makefile.am: we need atconfig and atlocal to be up to date
	when calling testsuite.

2012-07-18  Akim Demaille  <akim@lrde.epita.fr>

	doc: fix Texinfo command
	* doc/bison.texi: In parens, use @pxref.

2012-07-18  Akim Demaille  <akim@lrde.epita.fr>

	maint: Valgrind on OS X.
	* configure.ac (VALGRIND_PREBISON): New.
	* tests/Makefile.am (maintainer-check-valgrind): Use it.
	* etc/darwin11.4.0.supp: New.
	* configure.ac, etc/Makefile.am: Use it.
	* configure.ac: Disable Valgrind on Mac OS X.
	* README-hacking: Explain why.

2012-07-17  Akim Demaille  <akim@lrde.epita.fr>

	tests: be sure that backups are safe.
	* tests/local.at (at_save_special_files): here.

2012-07-17  Akim Demaille  <akim@lrde.epita.fr>

	maint: dead comment.
	* etc/README: here.

2012-07-17  Akim Demaille  <akim@lrde.epita.fr>

	tests: refactor for legibility.
	* tests/local.at (AT_BISON_CHECK_WARNINGS, AT_BISON_CHECK_WARNINGS_):
	New.

2012-07-17  Akim Demaille  <akim@lrde.epita.fr>

	tests: refactor the bison invocations.
	* tests/local.at (m4_null_if, AT_BISON_CHECK_): New.

2012-07-17  Akim Demaille  <akim@lrde.epita.fr>

	maint: fix syntax-check ignore patterns.
	* cfg.mk: here.

2012-07-17  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update

2012-07-16  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update.
	* gnulib: Update so that gitlog-to-changelog support --srcdir.
	* Makefile.am: Use it.

2012-07-10  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update
	* bootstrap, build-aux/.gitignore, gnulib, m4/.gitignore: update.

2012-07-06  Akim Demaille  <akim@lrde.epita.fr>

	maint: update release instructions
	* README-hacking: here.

2012-07-05  Akim Demaille  <akim@lrde.epita.fr>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

2012-07-05  Akim Demaille  <akim@lrde.epita.fr>

	version 2.5.90
	* NEWS: Record release date.

2012-07-05  Akim Demaille  <akim@lrde.epita.fr>

	build: fix gen-ChangeLog call.
	* Makefile.am: Be sure to catch errors, and fix option name

2012-07-05  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update.
	* gnulib/build-aux/do-release-commit-and-tag: Fix.

2012-07-05  Akim Demaille  <akim@lrde.epita.fr>

	tests: fix SKIP_IF for Java.
	* tests/local.at (AT_JAVA_COMPILE): here.

2012-07-05  Akim Demaille  <akim@lrde.epita.fr>

	api.prefix: incompatible with %name-prefix.
	* data/bison.m4: Make it incompatible.
	* tests/input.at: Check that it is.

2012-07-05  Akim Demaille  <akim@lrde.epita.fr>

	api.prefix: strengthen the tests and fix push-parsers.
	* tests/calc.at: Check api.prefix in addition to %name-prefix.
	* tests/headers.at: Check push parsers and pure interface.
	* tests/local.at: Use YYLTYPE renamed.
	* data/yacc.c (b4_declare_yyparse_push_): Handle api.prefix.
	* doc/bison.texi: Style changes.

2012-07-05  Akim Demaille  <akim@lrde.epita.fr>

	skeletons: style changes.
	* data/bison.m4: Define default values after having defined
	the support macros.
	Kill a dead comment.

2012-07-05  Akim Demaille  <akim@lrde.epita.fr>

	NEWS: minor changes.
	* NEWS: style changes.

2012-07-05  Akim Demaille  <akim@lrde.epita.fr>

	api.prefix: improve the documentation for YYDEBUG.
	* doc/bison.texi: Explain how api.prefix is applied to YYDEBUG.

2012-07-05  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update.
	* bootstrap, gnulib: Update.
	* cfg.mk (syntax-check): Don't check "error" usage in bison.texi.

2012-07-04  Akim Demaille  <akim@lrde.epita.fr>

	tests: headers.at: strengthen.
	* tests/headers.at (Several headers): Be stricter when checking
	the exported macros.

2012-07-04  Akim Demaille  <akim@lrde.epita.fr>

	glr.cc: do not override C++ definitions by C macros.
	* data/glr.c: here.
	* data/glr.cc: Fix overquotation.
	* tests/headers.at: Comment changes.

2012-07-04  Akim Demaille  <akim@lrde.epita.fr>

	YYLLOC_DEFAULT: factor, and don't export it in headers.
	* data/c++.m4, data/c.m4 (b4_yylloc_default_define): New.
	* data/glr.c, data/glr.cc, data/lalr1.cc, data/yacc.c: Use it.
	* data/glr.cc: Do not define YYLLOC_DEFAULT in the header file,
	but in the implementation one.

2012-07-04  Akim Demaille  <akim@lrde.epita.fr>

	api.prefix: do not use #define to handle YYSTYPE_IS_TRIVIAL etc.
	The following mixture is insane:

	  #define YYSTYPE_IS_TRIVIAL PREFIX_STYPE_IS_TRIVIAL
	  #if (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)

	since, of course YYSTYPE_IS_TRIVIAL is defined.  Instead we could
	define YYSTYPE_IS_TRIVIAL as PREFIX_STYPE_IS_TRIVIAL only when the
	later is defined, but let's avoid stacking CPP on top of M4: rather, use

	  #if (defined PREFIX_STYPE_IS_TRIVIAL && PREFIX_STYPE_IS_TRIVIAL)

	* data/glr.c, data/yacc.c: Use YYSTYPE_IS_TRIVIAL, YYSTYPE_IS_DECLARED,
	YYLTYPE_IS_TRIVIAL and YYLTYPE_IS_DECLARED under their api.prefix-renamed
	name.

2012-07-04  Akim Demaille  <akim@lrde.epita.fr>

	tests: portability fixes.
	Reported by Hydra.

	* tests/headers.at (Several headers): Be sure to include config.h
	in the files to compile.

2012-07-04  Akim Demaille  <akim@lrde.epita.fr>

	c++: fewer #includes in the headers.
	* data/lalr1.cc: Define YY_NULL in the *.cc file, it is not needed
	in the header.
	* data/location.cc: iosfwd suffices.

2012-07-04  Akim Demaille  <akim@lrde.epita.fr>

	glr.cc: formatting changes.
	* data/glr.cc: here.

2012-07-04  Akim Demaille  <akim@lrde.epita.fr>

	tests: more logs.
	* tests/headers.at (Several parsers): Here.

2012-07-04  Akim Demaille  <akim@lrde.epita.fr>

	api.prefix: also rename YYDEBUG.
	The testsuite in master has shown weird errors for the "Mulitple
	Parsers" tests: the caller of p5.parse() received some apparently
	random value, while tracing p5.parse() showed that the function was
	consistently returning 0.

	It happens when mixing several parser headers, some generated without
	%debug, others with.  In particular the C++ parser was generated with
	%debug, i.e., with:

	  #ifndef YYDEBUG
	  # define YYDEBUG 1
	  #endif

	and compiled separatedly.  Yet, its header was included after the one
	of another parser, this time without %debug, i.e., with

	  #ifndef YYDEBUG
	  # define YYDEBUG 0
	  #endif

	in its header.  As a result, the parser was compiled with YYDEBUG set,
	but its header was used without.  Since the layout of the objects are
	then completely different, boom.

	Therefore, do not change the value of YYDEBUG.  Rather, use it as a
	default value for <API.PREFIX>DEBUG.

	* data/c.m4 (b4_YYDEBUG_define): New.
	(b4_declare_yydebug): Rename as...
	(b4_yydebug_declare): this, for consistency.
	* data/glr.c, data/glr.cc, data/lalr1.cc, data/yacc.c: Use it.
	* NEWS: Document it.

2012-07-02  Akim Demaille  <akim@lrde.epita.fr>

	NEWS: spell check.
	* NEWS: here.

2012-06-29  Akim Demaille  <akim@lrde.epita.fr>

	api.prefix.
	* data/c.m4 (b4_api_prefix, b4_api_PREFIX): New.
	(b4_prefix, b4_union_name, b4_token_enums, b4_declare_yylstype): Use them.
	* data/glr.c, data/yacc.c, data/glr.cc, data/lalr1.cc: Use them to change
	the prefix of exported preprocessor symbols.
	* src/getargs.c (usage): Ditto.
	* tests/headers.at (Several parsers): New.
	* tests/local.at (AT_API_PREFIX): New.
	AT_YYSTYPE, AT_YYLTYPE): Adjust.
	* doc/bison.texi (Multiple Parsers): Move documentation of %name-prefix to...
	(Table of Symbols): here.
	(Multiple Parsers): Document api.prefix.
	(%define Summary): Point to it.
	Use @code for variable names.
	(Bison Options): -p/--name-prefix are obsoleted.
	* NEWS: Announce api.prefix.

2012-06-28  Akim Demaille  <akim@lrde.epita.fr>

	tests: use the generalized default yylex.
	* tests/actions.at, tests/glr-regression.at, tests/regression.at: here.

2012-06-28  Akim Demaille  <akim@lrde.epita.fr>

	tests: AT_YYERROR_DEFINE: prepare for list of ints.
	* tests/local.at (AT_YYERROR_DEFINE): Don't add quotes, check their
	presence to detect char/int types.
	* tests/actions.at, tests/conflicts.at, tests/glr-regression.at,
	* tests/push.at, tests/regression.at: Adjust.

2012-06-27  Akim Demaille  <akim@lrde.epita.fr>

	skeletons: no longer define YYLSP_NEEDED.
	* data/c.m4, data/glr.cc: here.
	* NEWS, TODO: Adjust.

2012-06-27  Akim Demaille  <akim@lrde.epita.fr>

	c++: do not export YYTOKEN_TABLE and YYERROR_VERBOSE.
	* src/output.c (prepare_symbols): Do not define b4_token_table.
	(prepare): Define b4_token_table_flag.
	* data/bison.m4 (b4_token_table_if): New.
	Arm it when error-verbose.
	* data/glr.c, data/yacc.c (YYTOKEN_TABLE): Remove.
	Use m4.
	* data/lalr1.cc: Likewise.
	(YYERROR_VERBOSE): Remove.
	* NEWS, doc/bison.texi: Document this.

2012-06-26  Akim Demaille  <akim@lrde.epita.fr>

	maint: use *.texi.
	This is more consistent with the other packages, and Automake-NG
	supports only *.texi.

	* doc/bison.texinfo: Rename as...
	* doc/bison.texi: this.
	* doc/Makefile.am, examples/calc++/Makefile.am: Adjust.

2012-06-26  Akim Demaille  <akim@lrde.epita.fr>

	tests: do not output m4 set up.
	* tests/local.at (AT_BISON_OPTION_PUSHDEFS, AT_BISON_OPTION_POPDEFS):
	Use a diversion to avoid outputting comments etc.
	Removes 17k lines from testsuite (10% of the number of lines).

2012-06-26  Akim Demaille  <akim@lrde.epita.fr>

	tests: use the generic yyerror function.
	* tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Factor.
	Use AT_YYERROR_DEFINE.
	Therefore, instead of using stdout, use and check stderr.
	* tests/glr-regression.at (Uninitialized location when reporting ambiguity):
	Use AT_YYERROR_DEFINE.

2012-06-26  Akim Demaille  <akim@lrde.epita.fr>

	tests: use assert instead of plain abort.
	* tests/actions.at, tests/calc.at, tests/conflicts.at,
	* tests/cxx-type.at, tests/glr-regression.at, tests/input.at,
	* tests/named-refs.at, tests/regression.at, tests/torture.at,
	* tests/local.at:
	Prefer assert to abort.

2012-06-26  Akim Demaille  <akim@lrde.epita.fr>

	tests: improve the generic yylex implementation.
	* tests/local.at (AT_YYSTYPE, AT_YYLTYPE): New.
	(AT_YYLEX_FORMALS): Use them.
	(AT_YYLEX_DEFINE): Be independent of the location implementation.

2012-06-26  Akim Demaille  <akim@lrde.epita.fr>

	tests: generalize the compilation macros.
	* tests/local.at (AT_COMPILE, AT_COMPILE_CXX): If OUTPUT ends with ".o",
	then append the "natural" extension for the input file (.c or .cc).
	If there is no source, pass -c.
	* tests/headers.at, tests/input.at, tests/regression.at: Adjust.

2012-06-26  Akim Demaille  <akim@lrde.epita.fr>

	tests: fix confusion between api.prefix and name-prefix.
	* tests/local.at (AT_NAME_PREFIX): Take api.prefix into account.
	(AT_API_PREFIX): Rename as...
	(AT_API_prefix): this.
	Do not take %name-prefix into account.
	Fix misuses.

2012-06-26  Akim Demaille  <akim@lrde.epita.fr>

	maint: gitignores.

2012-06-25  Akim Demaille  <akim@lrde.epita.fr>

	yacc: work around the ylwrap limitation.
	* data/yacc.c (b4_shared_declarations): Include the header guards.
	Do not include the header in the *.c file, duplicate it.
	* NEWS (Future Changes): Extend, and announce the forthcoming change
	about the use of the parser header.

2012-06-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: more uniformity.
	* tests/local.at (AT_LEX_FORMALS, AT_LEX_ARGS, AT_LEX_PRE_FORMALS)
	(AT_LEX_PRE_ARGS): Rename as...
	(AT_YYLEX_FORMALS, AT_YYLEX_ARGS, AT_YYLEX_PRE_FORMALS)
	(AT_YYLEX_PRE_ARGS): these, for consistency.
	(AT_API_PREFIX): Take %name-prefix into account.
	(AT_YYLEX_PROTOTYPE): New.
	Use it.
	* tests/actions.at, tests/calc.at, tests/cxx-type.at: Adjust to
	use them.

2012-06-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: handle locations in a more generic way.
	* tests/local.at (AT_YYERROR_PROTOTYPE): New.
	Use it.
	* tests/cxx-type.at: Extensive revamp to use a more traditional
	quotation scheme, and to use the generic yyerror implementation.
	Prefer Autotest macros to CPP macros.
	* tests/java.at: .

2012-06-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: handle locations in the generic yyerror functions.
	* tests/local.at (AT_YYERROR_DECLARE_EXTERN, AT_YYERROR_DECLARE)
	(AT_YYERROR_DEFINE): Handle locations for C and C++.
	* tests/calc.at: Use it for C++ (as C has extra arguments which
	are not yet handled by AT_BISON_OPTION_PUSHDEFS).
	* tests/actions.at: Adjust.

2012-06-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: fix AT_CHECK_CALC.
	* tests/calc.at (AT_CHECK_CALC): Contrary to its documentation,
	the test was skipped if given a second argument.
	Unused feature, remove it.

2012-06-22  Akim Demaille  <akim@lrde.epita.fr>

	tests: improve infrastructure
	* tests/local.at (AT_LANG): Use c++ instead of cxx for C++.
	Adjust dependencies.
	(AT_YYERROR_DECLARE_EXTERN, AT_YYERROR_DECLARE): Issue nothing
	for C++/Java.
	(AT_YYERROR_DEFINE): Use m4_case.
	(AT_JAVA_COMPILE): Use AT_SKIP_IF.

2012-06-21  Akim Demaille  <akim@lrde.epita.fr>

	tests: factor.
	* tests/glr-regression.at, tests/output.at, tests/push.at,
	* tests/regression.at, tests/torture.at, tests/actions.at:
	Use AT_YYLEX_* and AT_YYERROR_*.

2012-06-21  Akim Demaille  <akim@lrde.epita.fr>

	skeletons: minor style changes
	* data/glr.c, data/yacc.c: here.

2012-06-21  Akim Demaille  <akim@lrde.epita.fr>

	tests: AT_LANG.
	* tests/local.at (AT_BISON_OPTION_PUSHDEFS, AT_BISON_OPTION_POPDEFS):
	Define/undefine AT_LANGE
	(AT_LANG_COMPILE): New.
	(AT_FULL_COMPILE): Use AT_LANG.

2012-06-21  Akim Demaille  <akim@lrde.epita.fr>

	c skeletons: factor the declaration of yylloc and yylval.
	There is one difference: now, even without --defines, we generate
	extern declarations for these variables.  The factoring is worth it.
	* data/c.m4 (b4_declare_yylstype): Declare them.
	* data/glr.c, data/yacc.c: Adjust.

2012-06-21  Akim Demaille  <akim@lrde.epita.fr>

	news: condemn YYPARSE_PARAM and YYLEX_PARAM.
	* NEWS: here.
	(Bison 1.875): Add %parse-param and %lex-param.
	* doc/bison.texinfo: Spello.

2012-06-20  Akim Demaille  <akim@lrde.epita.fr>

	maint: regen.
	* Makefile.am (regen): New target.

2012-06-19  Akim Demaille  <akim@lrde.epita.fr>

	maint: formatting changes.
	* NEWS: Fix indentation of code snippets.
	Untabify.

2012-06-17  Akim Demaille  <akim@lrde.epita.fr>

	tests: support api.prefix.
	* tests/local.at (AT_BISON_OPTION_PUSHDEFS, AT_BISON_OPTION_POPDEFS):
	Define AT_API_PREFIX.
	(AT_YYERROR_DEFINE, AT_YYERROR_DECLARE_EXTERN, AT_YYLEX_DECLARE_EXTERN)
	(AT_YYLEX_DEFINE): Use it.
	* tests/input.at, tests/regression.at, tests/torture.at: Add
	AT_BISON_OPTION_PUSHDEFS/POPDEFS.

2012-06-17  Akim Demaille  <akim@lrde.epita.fr>

	tests: pacify font-lock-mode.
	* tests/local.at: here.

2012-06-17  Akim Demaille  <akim@lrde.epita.fr>

	tests: remove test covered elsewhere.
	* tests/headers.at (%union and --defines): Remove, pretty useless and
	insignificant.

2012-06-17  Akim Demaille  <akim@lrde.epita.fr>

	tests: factor the declaration/definition of yyerror and yylex.
	* tests/local.at (AT_YYERROR_DECLARE, AT_YYERROR_DECLARE_EXTERN)
	(AT_YYERROR_DEFINE, AT_YYLEX_DECLARE, AT_YYLEX_DECLARE_EXTERN)
	(AT_YYLEX_DEFINE): New.
	Must be used inside AT_BISON_OPTION_PUSHDEFS/POPDEFS pair.
	* tests/actions.at, tests/conflicts.at, tests/glr-regression.at,
	* tests/headers.at, tests/input.at, tests/named-refs.at,
	* tests/regression.at, tests/skeletons.at, tests/synclines.at,
	* tests/torture.at: Use them.

2012-06-17  Akim Demaille  <akim@lrde.epita.fr>

	regen.

2012-06-17  Akim Demaille  <akim@lrde.epita.fr>

	tests: portability issues.
	* tests/calc.at (AT_CALC_MAIN): Missing include reported by Hydra.

2012-06-15  Akim Demaille  <akim@lrde.epita.fr>

	tests: call the parser from another compilation unit.
	In order to improve the testing of %defines, which exports the
	interface of the generated parser, change the calc.at tests so that
	when %defines is passed, main will be in another compilation unit.  It
	loads the generated header.

	* tests/calc.at (AT_CALC_MAIN): New.
	Includes the definition of the global variables.
	Therefore, now declare them from the %requires section of the parser.
	Adjust to yydebug and yyparse being renamed by %name-prefix.

2012-06-15  Akim Demaille  <akim@lrde.epita.fr>

	glr.c, yacc.c: declare yydebug in the header.
	* data/c.m4 (b4_declare_yydebug): New.
	* data/glr.c, data/yacc.c (b4_shared_declarations): Use it.
	Remove the corresponding code from the parser body.
	* NEWS: Doc this.

2012-06-15  Akim Demaille  <akim@lrde.epita.fr>

	skeletons: use header guards.
	* data/glr.c, data/glr.cc, data/yacc.c: here.
	* NEWS: Document it.

2012-06-15  Akim Demaille  <akim@lrde.epita.fr>

	tests: improve AT_FULL_COMPILE.
	* tests/local.at: Accept a third argument.
	Simplify quotation pattern.
	Calls for better refactoring, but will suffice for a while.

2012-06-15  Akim Demaille  <akim@lrde.epita.fr>

	tests: reorder.
	* tests/calc.at (power): Move its definition, as a preparation for
	forthcoming changes.
	And space changes.

2012-06-15  Akim Demaille  <akim@lrde.epita.fr>

	tests: strengthen the test on generated headers inclusion
	* tests/headers.at (AT_TEST_CPP_GUARD_H): Accept Bison directives.
	(Invalid CPP headers): Check glr.

2012-06-15  Akim Demaille  <akim@lrde.epita.fr>

	yacc.c: instead of duplicating y.tab.h inside y.tac.c, include it.
	This is already what glr.c and lalr1.cc do.

	* data/yacc.c: here.

2012-06-13  Akim Demaille  <akim@lrde.epita.fr>

	yacc.c: factor.
	yacc.c used to include two almost identical sections: one for the *.h
	file, and another for the *.c file.  The main difference is that in
	the *.c file we used the yy* names (as %name-prefix is handled by
	"#define yy* <prefix>*" before), while the *.hh used <prefix>* names.
	Keep only the later.  If this is troublesome, b4_shared_declarations
	can easily take the desired prefix as argument.

	* data/yacc.c (b4_shared_declarations): New.
	Use it to factor duplicated declarations.

2012-06-12  Akim Demaille  <akim@lrde.epita.fr>

	skeletons: factor yacc.c and glr.c.
	yacc.c and glr.c share common declarations.  Their YYLTYPE are exactly
	equal, and their YYSTYPE are sufficiently alike to be fused (its
	declaration was protected by YYSTYPE_IS_DECLARED in yacc.c, but not in
	glr.c).  Besides, yacc.c duplicated the definitions of YYLTYPE and
	YYSTYPE (*.h/*.c).

	* data/c.m4 (b4_declare_yylstype): New.
	* data/yacc.c, data/glr.c: Use it.

2012-06-12  Akim Demaille  <akim@lrde.epita.fr>

	glr.c: minor refactoring.
	* data/glr.c (b4_shared_declarations): Move from the generated file
	section, to the M4 prologue.

2012-06-12  Akim Demaille  <akim@lrde.epita.fr>

	tests: remove all the -On flags.
	* tests/atlocal.in: Here.
	Reported by Gilles Espinasse.

2012-06-12  Akim Demaille  <akim@lrde.epita.fr>

	maint: fix spello.
	* README-hacking: Here.
	* THANKS: Reported by Gilles Espinasse.

2012-06-12  Akim Demaille  <akim@lrde.epita.fr>

	maint: improve release procedure instructions.
	* gnulib: Update, in particular (README-release).
	* bootstrap.conf: don't require gendocs, provided by gnu-web-doc-update,
	provided by readme-release.
	* README-hacking: Update accordingly.

2012-06-07  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update readme-release.
	* gnulib (readme-release): Now includes the modules it promotes.
	* bootstrap.conf: Simplify accordingly.

2012-06-07  Akim Demaille  <akim@lrde.epita.fr>

	maint: cfg.mk: manual title.
	* cfg.mk (manuel_title): New.

2012-06-07  Akim Demaille  <akim@lrde.epita.fr>

	maint: cfg.mk: simplify
	* cfg.mk: Remove bits provided by maint.mk.

2012-06-07  Akim Demaille  <akim@lrde.epita.fr>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

2012-06-05  Akim Demaille  <akim@lrde.epita.fr>

	version 2.5.1
	* NEWS: Record release date.

2012-06-05  Akim Demaille  <akim@lrde.epita.fr>

	NEWS: prepare for 2.5.1.
	* NEWS: Be compliant with do-release-commit-and-tag.

2012-06-05  Akim Demaille  <akim@lrde.epita.fr>

	maint: update release procedure
	* bootstrap.conf: Request do-release-commit-and-tag and readme-release.
	* README-hacking: Adjust.

2012-06-05  Jim Meyering  <meyering@redhat.com>

	maint: fix comment typos
	Using http://github.com/lyda/misspell-check, massage its
	output into sed commands to perform the suggested changes.
	Initially, I filtered out the THRU->Through changes, because
	that failed to retain capitalization in the grammar token.
	Instead, do this manually, beforehand:

	sed -i s/THRU/THROUGH/ tests/existing.at
	git ls-files|misspellings -f -|perl -nl \
	  -e '/^(.*?)\[(\d+)\]: (\w+) -> "(.*?)"$/ or next;' \
	  -e '($file,$n,$l,$r)=($1,$2,$3,$4); $q="'\''"; $r=~s/$q/$q\\$q$q/g;'\
	  -e 'print "sed -i $q${n}s!$l!$r!$q $file"'|bash

2012-05-23  Akim Demaille  <akim@lrde.epita.fr>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

2012-05-23  Akim Demaille  <akim@lrde.epita.fr>

	Bison 2.5.1_rc2.
	* NEWS: Update.

2012-05-23  Akim Demaille  <akim@lrde.epita.fr>

	doc: fixes.
	* doc/bison.texinfo: Fix errors spotted by syntax-check.

2012-05-23  Akim Demaille  <akim@lrde.epita.fr>

	build: fix ChangeLog generation.
	* gnulib: Update to get newest gitlog-to-changelog.
	* bootstrap: Update.
	* Makefile.am (gen-ChangeLog): Fix for Bison's git log style.

2012-05-21  Akim Demaille  <akim@lrde.epita.fr>

	c++: compute the header guards.
	This is a frequent request.  Recently pointed out by Wei Song,
	<http://lists.gnu.org/archive/html/help-bison/2012-05/msg00002.html>.

	* data/c.m4 (b4_tocpp, b4_cpp_guard, b4_cpp_guard_open)
	(b4_cpp_guard_close): New.
	* data/lalr1.cc, data/location.cc, data/stack.hh: Use them.
	* TODO (Header Guards): Move to...
	* NEWS: here.
	Formatting changes.

2012-05-21  Akim Demaille  <akim@lrde.epita.fr>

	skeletons: remove support for unused directive.
	* src/scan-skel.l (@dir_prefix@): Remove support, has never been
	used, not even in the commit that introduced it,
	2b81e969ea04c1a6502928ba7e847ec8ff7dcb2f.

2012-05-21  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: improve Doxygen documentation.
	* data/location.cc: Qualify file names with directory name.

2012-05-21  Akim Demaille  <akim@lrde.epita.fr>

	lalr1.cc: extract stack.hh.
	See commit 51bacae6b58fd5c6cce861f00440dc917384625e.
	* data/stack.hh: New, extracted from...
	* data/lalr1.cc: here.
	* data/Makefile.am: Adjust.

2012-05-21  Akim Demaille  <akim@lrde.epita.fr>

	news: convert to double quotes.
	* NEWS: Convert from `quoted' to "quoted".
	Reported by Stefano Lattarini.
	http://lists.gnu.org/archive/html/bison-patches/2012-05/msg00039.html

2012-05-21  Akim Demaille  <akim@lrde.epita.fr>

	space changes.
	* src/flex-scanner.h: Indent nested cpp directives.

2012-05-21  Akim Demaille  <akim@lrde.epita.fr>

	build: do not prototype flex-generated functions.
	Some versions of Flex, possibly modified by the distribution package
	maintainers, have incompatible signatures.  Since newer versions of
	Flex prototype their functions, avoid the conflicts in that case.
	Reported by Stefano Lattarini.
	<http://lists.gnu.org/archive/html/bug-bison/2012-05/msg00012.html>.

	* src/flex-scanner.h (FLEX_VERSION_GT): New.
	Use it to issue prototypes for flex-generated functions only for
	versions up to 2.5.31, in accordance with the comment.
	See commit dc9701e848f27ae64b6ddcf809580998667d60f2.
	Use it to define yylex_destroy when needed.

2012-05-16  Akim Demaille  <akim@lrde.epita.fr>

	build: fix ChangeLog generation.
	* Makefile.am (gen-ChangeLog): Fix for VPATH builds.

2012-05-14  Akim Demaille  <akim@lrde.epita.fr>

	Bison 2.5.1_rc1.
	* NEWS: Update.
	* src/parse-gram.c, src/parse-gram.h: Regen.

2012-05-11  Akim Demaille  <akim@lrde.epita.fr>

	tests: save/restore Autotest special files when checking XML support.
	Currently the test 248, "parse-gram.y: LALR = IELR", fails
	BISON_TEST_XML is set.

	* tests/local.at (AT_BISON_CHECK_XML): Belt: Save/restore files.
	* tests/regression.at (parse-gram.y: LALR = IELR): Suspenders: Don't
	rely on expout.
	Each one of these changes suffices.

2012-05-11  Akim Demaille  <akim@lrde.epita.fr>

	tests: AT_SAVE_SPECIAL_FILES / AT_RESTORE_SPECIAL_FILES.
	Some of our macros play with expout and other Autotest special files,
	which may break their callers (e.g., currently TESTSUITEFLAGS='248
	BISON_TEST_XML=1' fails).

	There is already some support for this.  Expand it to be ready to use
	it elsewhere.

	* tests/local.at (AT_RESTORE_SPECIAL_FILES, AT_SAVE_SPECIAL_FILES)
	(at_save_special_files, at_restore_special_files): New.
	(AT_BISON_CHECK_NO_XML): Use them.

2012-05-11  Akim Demaille  <akim@lrde.epita.fr>

	tests: honor TESTSUITEFLAGS in all the check targets.
	* tests/Makefile.am (installcheck-local): Simplify.
	(maintainer-check-posix, maintainer-check-valgrind): Honor
	$(TESTSUITEFLAGS).

2012-05-11  Akim Demaille  <akim@lrde.epita.fr>

	build: do not enable c++ warnings on 0 when nullptr is not supported.
	* configure.ac (WARN_CXXFLAGS): Enable -Wzero-as-null-pointer-constant
	only when nullptr is supported..

2012-05-11  Akim Demaille  <akim@lrde.epita.fr>

	maint: update gnulib.
	* bootstrap, gnulib: Update.

2012-05-09  Akim Demaille  <akim@lrde.epita.fr>

	build: config.in.h.
	Historically we used config.hin (where everybody else used
	config.h.in) to please DOS.  Now that we use gnulib, there are already
	tons of files with several dots, especially *.in.h.

	* configure.ac: Rename config.hin as config.in.h.

2012-05-09  Akim Demaille  <akim@lrde.epita.fr>

	build: move silent rules.
	* tests/Makefile.am: In the generation of the test suite.

2012-05-09  Akim Demaille  <demaille@gostai.com>

	glr.c: reduce variable scopes.
	* data/glr.c: Where appropriate, fuse variable declarations followed
	by assignments by variable declarations with a value.
	Where appropriate, introduce new scopes to limit variable spans.

2012-05-08  Akim Demaille  <akim@lrde.epita.fr>

	maint: maintainer-release-check.
	* tests/Makefile.am (maintainer-release-check): New.
	* Makefile.am (MAINTAINER_CHECKS): New.
	Support maintainer-release-check.
	* README-hacking: Document it, and syntax-check too.

2012-05-08  Akim Demaille  <akim@lrde.epita.fr>

	maint: shush a syntax-check.
	* cfg.mk: lib/timevar is not planned to be gnulib'ed, as it comes
	from GCC.

2012-05-08  Akim Demaille  <akim@lrde.epita.fr>

	maint: prefer "commit message" to "log entry".
	* README-hacking: here.
	Suggested by Stefano Lattarini.

2012-05-08  Akim Demaille  <akim@lrde.epita.fr>

	command line: fix minor leaks.
	* src/getargs.c (getargs): Free pointers before allocating them new
	content.

2012-05-08  Akim Demaille  <akim@lrde.epita.fr>

	maint: we no longer maintain the ChangeLog.
	* .gitattributes: No need to merge it.
	* README-hacking: Update release instructions.

2012-05-06  Akim Demaille  <akim@lrde.epita.fr>

	maint: fix the generation of the synclines for bison's parser.
	* tests/bison.in: Import from master the changes that make
	this script generate synclines that are independant of the
	builddir/srcdir user's set up.

2012-05-06  Akim Demaille  <akim@lrde.epita.fr>

	maint: regen.
	* src/parse-gram.c, src/parse-gram.h: Regen.

2012-05-06  Akim Demaille  <akim@lrde.epita.fr>

	maint: import the xmemdup0 gnulib module.
	* bootstrap.conf: Require this module.
	* src/parse-gram.y: Include xmemdup0.h.

2012-05-06  Akim Demaille  <akim@lrde.epita.fr>

	maint: remove left-over gnulib modules.
	* bootstrap.conf (gnulib_modules): Remove pipe-posix.
	* lib/.gitignore, m4/.gitignore: Remove files that we no longer use.

2012-05-06  Akim Demaille  <akim@lrde.epita.fr>

	maint: ignore files imported by autopoint.
	* m4/.gitignore: here.

2012-05-06  Akim Demaille  <akim@lrde.epita.fr>

	build: AC_PROG_LEX: use more readable variable names.
	* m4/flex.m4 (AC_PROG_LEX): Prefer LEX_IS_FLEX to FLEX.
	Prefer true/false to yes/no for such variables.
	* configure.ac: Adjust.

2012-05-06  Jim Meyering  <meyering@redhat.com>

	maint: regen src/parse-gram.[ch]

2012-05-06  Jim Meyering  <meyering@redhat.com>
	    Akim Demaille  <akim@lrde.epita.fr>

	maint: simplify parse-gram.y
	* src/parse-gram.y (add_param): Use xmemdup0 in place of
	xmalloc+memcpy, and strspn in place of an open-coded loop.

2012-05-06  Jim Meyering  <meyering@redhat.com>

	maint: s/strncpy/memcpy/, when equivalent
	* src/output.c (output_skeleton): Use memcpy, not strncpy,
	since the source is known to fit in the destination buffer.
	* src/parse-gram.y (%skeleton): Likewise.

2012-05-04  Akim Demaille  <akim@lrde.epita.fr>

	glr.c: untabify.
	* data/glr.c: here.

2012-05-04  Akim Demaille  <akim@lrde.epita.fr>

	glr.cc: untabify.
	* data/glr.cc: here.

2012-05-04  Akim Demaille  <akim@lrde.epita.fr>

	glr.cc: formatting changes.
	* data/glr.cc: Fit in 80 columns.

2012-05-04  Akim Demaille  <akim@lrde.epita.fr>

	glr.cc: remove unused signature.
	* data/glr.cc (yydestruct_): Not used, remove.
	It is yydestruct which is used.

2012-05-04  Akim Demaille  <akim@lrde.epita.fr>

	glr.cc: properly declare locations are const where appropriate.
	* data/glr.cc (yyerror): The location is const.

2012-05-04  Akim Demaille  <akim@lrde.epita.fr>

	doc: fix @xref.
	* doc/bison.texinfo: here.

2012-05-02  Akim Demaille  <akim@lrde.epita.fr>

	tests: ignore code coverage/profiling failure messages
	The Hydra buildfarm provides code coverage analysis.  For some reason,
	in some test cases, code coverage data seem to be incompatible, and
	generate error messages at parser run-time.  Ignore these messages so
	that (i) these tests do pass, (ii) coverage results be provided by
	Hydra.

	* tests/local.at (AT_PARSER_CHECK): Ignore messages for failed merges
	of code coverage/profiling results.

2012-04-16  Akim Demaille  <akim@lrde.epita.fr>

	doc: fix some invalid @ref.
	* doc/bison.texinfo: Fix incorrect @ref uses.

2012-04-16  Akim Demaille  <akim@lrde.epita.fr>

	build: fix previous commit.
	* bootstrap: Update from gnulib.

2012-04-16  Akim Demaille  <akim@lrde.epita.fr>

	install-pdf: fix.
	* gnulib: Fix install-pdf in po/ and runtime-po/.
	Reported by Hans Aberg.
	Fixed by Joel E. Denny.
	http://lists.gnu.org/archive/html/bug-bison/2011-05/msg00008.html

2012-04-16  Akim Demaille  <akim@lrde.epita.fr>

	NEWS: Update.
	* NEWS: Spell check.
	(%printer): is now documented.

2012-04-16  Akim Demaille  <akim@lrde.epita.fr>

	%printer: support both yyo and yyoutput.
	lalr1.cc used to support yyo, but not yyoutput.  Support both,
	but document only yyoutput (at least until there is some consensus
	on this).

	* data/c.m4 (yy_symbol_value_print): Also support yyo.
	* data/glr.cc  (yy_symbol_value_print_): Support both yyo and yyoutput.
	* data/lalr1.cc: Also support yyoutput.
	* doc/bison.texinfo: Explicitly use yyoutput in the examples.
	* examples/mfcalc/mfcalc.test: Test the -p option.

2012-04-16  Akim Demaille  <akim@lrde.epita.fr>

	doc: mfcalc: demonstrate %printer.
	* doc/bison.texinfo (Printer Decl): New.
	Number mfcalc.y snippets so that they are output in
	the proper order.
	(The mfcalc Main): Use yydebug.
	(Debugging): Simplify the text.
	(Enabling Traces, Mfcalc Traces, The YYPRINT Macro): New.
	(Table of Symbols): Document YYPRINT and YYFPRINTF.

2012-04-16  Akim Demaille  <akim@lrde.epita.fr>

	tests: style changes.
	* tests/input.at: Use "print" in %printer instead of "destroy".
	It is unused, so we don't care, yet it is less surprising.
	* tests/actions.at: Comment changes.

2012-04-10  Akim Demaille  <akim@lrde.epita.fr>

	build: require Flex.
	* configure.ac: Require Flex.

2012-04-10  Akim Demaille  <akim@lrde.epita.fr>

	build: flex.m4: check for Flex.
	* m4/flex.m4 (_AC_PROG_LEX_YYTEXT_DECL): Check that $LEX
	supports some of the Flex options, and exclusive start conditions.
	Define FLEX to 'yes'/'', as AC_PROG_CC does for GCC.

2012-04-10  Akim Demaille  <akim@lrde.epita.fr>

	build: flex.m4: quote properly.
	* m4/flex.m4: Use quotes more systematically.

2012-04-10  Akim Demaille  <akim@lrde.epita.fr>

	build: flex.m4.
	* m4/flex.m4: New.
	An exact copy of what is in Autoconf currently.

2012-04-10  Akim Demaille  <akim@lrde.epita.fr>

	build: autoconf: update.
	* submodules/autoconf: Update.
	There are no changes in data/m4sugar/foreach.m4, and the
	changes in data/m4sugar/m4sugar.m4 are minor.

2012-04-10  Akim Demaille  <akim@lrde.epita.fr>

	glr: eliminate last bits of unwanted locations.
	* data/glr.c (YYLTYPE): Do not define when locations are
	not demanded.
	Adjust all dependencies.

2012-04-10  Akim Demaille  <akim@lrde.epita.fr>

	NEWS: 2.6 will drop K&R.
	* NEWS: here.
	(glr.c): Fix a spello.

2012-04-09  Akim Demaille  <akim@lrde.epita.fr>

	TODO: remove dead items.
	* TODO (Documentation, %printer, Java): Remove, already done (or just
	waiting for approval).
	(Fortran, BTYacc): Remove, there does not seem to be demand.

2012-04-09  Akim Demaille  <akim@lrde.epita.fr>

	TODO: import from master.
	* TODO: Copy the current version.

2012-04-07  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update.
	* bootstrap.conf (bootstrap_sync): True again.
	It was disabled while waiting for changes to be integrated
	in gnulib's bootstrap, which was done long ago.
	* bootstrap, gnulib: Update.

2012-04-04  Akim Demaille  <akim@lrde.epita.fr>

	maint: update NEWS.
	* NEWS: Fix entry about __attribute__.
	Reorder by "decreasing" order of importance.

2012-04-04  Akim Demaille  <akim@lrde.epita.fr>

	doc: fix index.
	http://lists.gnu.org/archive/html/bison-patches/2012-04/msg00006.html

	* doc/bison.texinfo: Avoid using @def* variant with more
	than the defined entity as main entity, as it results in
	an incorrect index.  For instance, don't document
	{return YYERROR;}, which results in a single index entry
	"return YYERROR;", but rather as typed function whose
	return type is "type", and whose argument list is ";".

2012-04-04  Akim Demaille  <akim@lrde.epita.fr>

	doc: fix documentation of YYERROR.
	* doc/bison.texinfo (Table of Symbols): Fix the documentation
	of YYERROR by copying that from "Action Features".

2012-04-01  Akim Demaille  <akim@lrde.epita.fr>

	c++: more YY_NULL
	Caught by maintainer-check-g++.
	* data/glr.c, data/lalr1.cc, data/yacc.c, tests/cxx-type.at,
	* tests/glr-regression.at, tests/push.at:
	When simple to do, avoid expliciting the null ptr.
	Otherwise use YY_NULL.

2012-04-01  Akim Demaille  <akim@lrde.epita.fr>

	bump to 2012 in skeletons.
	* data/glr.c, data/glr.cc, data/lalr1.cc, data/lalr1.java,
	* data/location.cc, data/yacc.c: Bump copyright year ranges.

2012-04-01  Akim Demaille  <akim@lrde.epita.fr>

	build: remove ancient Autoconf tests.
	lib/subpipe.c was removed in 47fa574761319b0a422691223c9b8a9a72f36aa2.

	* m4/subpipe.m4: Remove.
	* configure.ac (BISON_PREREQ_SUBPIPE): Remove.

2012-03-31  Akim Demaille  <akim@lrde.epita.fr>

	doc: c++: complete the location documentation.
	* data/location.cc (position::initialize, location::initialize):
	Also accept line and column, with default values.
	* doc/bison.texinfo (C++ position, C++ location): New nodes.
	Describe more thoroughly these classes.
	Fix several Texinfo misuses.

2012-03-31  Akim Demaille  <demaille@gostai.com>

	c++: locations: provide convenience constructors.
	* data/location.cc (position::position): Accept file, line and
	column as arguments with default values.
	Always qualify initial line and column literals as unsigned.
	(location::location): Provide convenience constructors.

2012-03-31  Akim Demaille  <akim@lrde.epita.fr>

	c++: locations: remove useless "inline".
	* data/location.cc: "inline" is implicit when defining
	methods in the class definition.

2012-03-31  Akim Demaille  <akim@lrde.epita.fr>

	glr: do not use locations when they are not requested
	When the test suite runs with -O2 and warnings enabled, G++
	complains of locations being used, but not initialized.
	The simplest is to not use locations.

	* data/glr.c (b4_locuser_formals, b4_locuser_args): New.
	Use them when locations should not be used.
	Use b4_locations_if where appropriate.
	(yyuserAction): Modify the order to the arguments to make
	it more alike the other routines, and to make use of
	b4_locuser_args simpler.

2012-03-31  Akim Demaille  <akim@lrde.epita.fr>

	c++: use nullptr for C++11.
	C++11 introduces "nullptr" which plays the role of C's NULL, in
	replacement of "0".  Fix the C++ skeletons to avoid warnings about
	uses of "0" in place of "nullptr", and improve C skeletons to also use
	this "nullptr" when compiled with a C++11 compiler.

	* configure.ac: More C++ warnings.
	* NEWS (2.5.1): Document this.
	* data/c++.m4, data/c.m4 (b4_null_define): New.
	(b4_null): Use YY_NULL instead of 0.
	* data/glr.c, data/lalr1.cc, data/location.cc, data/yacc.c:
	Call b4_null_define/b4_null where appropriate.
	Use YY_NULL instead of NULL.
	* data/location.cc (initialize): Accept a default argument,
	YY_NULL.
	* tests/actions.at, tests/calc.at: Adjust.

	* data/glr.c, lib/libiberty.h, src/system.h (__attribute__):
	Do not disable it when __STRICT_ANSI__ is defined, as, for
	instance, it disables the __attribute__((unused)) which
	protects us from some compiler warnings.
	This was already done elsewhere in Bison, in 2001, see
	4a0d89369599a2cea01f4fbdf791f426a02cb5a3.
	* tests/regression.at: Adjust output.

2012-03-30  Akim Demaille  <akim@lrde.epita.fr>

	build: simplify and improve the compiler warnings for tests.
	* configure.ac (warn_common, warn_c, warn_cxx): New.
	Use them to compute independently the options supported
	by the C and C++ compilers.
	Don't AC_SUBST the variables passed to gl_WARN_ADD: it
	does it for us.
	(WARN_CFLAGS_TEST, WARN_CXXFLAGS_TEST): Don't aggregate
	$WARN_CFLAGS and $WARN_CXXFLAGS in them now, leave it
	to atlocal.in.
	(O0CFLAGS, O0CXXFLAGS): Move their definition to...
	* tests/atlocal.in: here.
	Be more systematic between C and C++.
	Reorder to factor between variables.
	Propagate all of the variables when --compile-c-with-cxx.

2012-03-30  Akim Demaille  <akim@lrde.epita.fr>

	gnulib: update.

2012-03-30  Akim Demaille  <akim@lrde.epita.fr>

	maint: formatting changes.
	* src/system.h: Indent CPP directives using cppi.

2012-03-27  Akim Demaille  <akim@lrde.epita.fr>

	NEWS: update.
	* NEWS: Java fixes, more about the doc changes, liby issues.

2012-03-27  Tim Landscheidt  <tim@tim-landscheidt.de>

	Java: Fix syntax error handling without error token.
	* data/lalr1.java (YYParser::parse): Here.
	* tests/java.at: Add test case.

2012-03-24  Akim Demaille  <akim@lrde.epita.fr>

	tests: beware of -pedantic on large #line numbers.
	* tests/local.at (AT_TEST_TABLES_AND_PARSE): Don't pass -pedantic
	when compiling large canonical-LR parsers.
	Reported by Tys Lefering.
	http://lists.gnu.org/archive/html/bug-bison/2012-03/msg00025.html

2012-03-24  Akim Demaille  <akim@lrde.epita.fr>

	tests: when using the C++ compiler, use its flags too.
	* tests/local.at: Go for colors.
	(--compile-c-with-cxx): New option.
	We used to pass "CC=$CXX" as command line argument,
	but it was not possible to adjust CFLAGS accordingly
	in atlocal, since it is loaded before assignments on
	the command line are honored (so that the command line
	takes precedence).
	* tests/atlocal.in: Implement it.
	* tests/local.mk: Use it.

2012-03-19  Akim Demaille  <akim@lrde.epita.fr>

	doc: update the --verbose report format.
	* doc/bison.texinfo (Understanding): Adjust to match the
	current format.

2012-03-19  Akim Demaille  <akim@lrde.epita.fr>

	doc: spell check.
	* doc/bison.texinfo: here.

2012-03-19  Akim Demaille  <akim@lrde.epita.fr>

	doc: stmt, not stmnt.
	* doc/bison.texinfo: s/stmnt/stmt/g.  This is a
	much more common abbreviation for "statement".

2012-03-19  Akim Demaille  <akim@lrde.epita.fr>

	doc: save width.
	* doc/bison.texinfo (Language and Grammar): Use the same
	layout for an example in all the versions, i.e., keep
	as general case what used to be used only for Info.

2012-03-19  Akim Demaille  <akim@lrde.epita.fr>

	doc: reformat grammar snippets.
	* doc/bison.texinfo: Convert the grammar examples to
	use a narrower style.  This helps fitting into the
	@smallbook constraints.
	http://lists.gnu.org/archive/html/bison-patches/2012-03/msg00011.html

2012-03-19  Akim Demaille  <akim@lrde.epita.fr>

	doc: use only @example, not @smallexample.
	* doc/bison.texinfo: Convert all @smallexamples into @examples.
	Adjust layout where needed.

2012-03-19  Akim Demaille  <akim@lrde.epita.fr>

	doc: style changes.
	* doc/bison.texinfo: Avoid line width issues with TeX.
	Upgrade ancient messages.
	Move some comments to better looking places.
	Add more @group.
	(Mfcalc Symbol Table): Reduce variable scopes.
	Prefer size_t for sizes.
	Prefer declarations with an initial value.
	Fix a @group environment.

2012-03-19  Paul Eggert  <eggert@cs.ucla.edu>

	doc: minor fixes to "Understanding" section
	* doc/bison.texinfo (Understanding): Minor wording fixes and
	improvements.  Fixes problems reported in
	<https://savannah.gnu.org/patch/?4306>.

2012-03-13  Akim Demaille  <demaille@gostai.com>

	tests: minor fixes/simplifications
	* tests/local.at (AT_BISON_CHECK_NO_XML): Simplify sed programs,
	quotation, and default value assignments.
	Ensure a proper value to the numeric variables.
	Reported by Lie Yan.
	http://lists.gnu.org/archive/html/bug-bison/2012-03/msg00000.html

2012-03-09  Akim Demaille  <demaille@gostai.com>

	tests: be robust to quote style.
	See <http://lists.gnu.org/archive/html/bug-bison/2012-01/msg00120.html>.

	* src/main.c (main): Define the quoting style we use.
	* tests/atlocal.in: Use ASCII style quotes during the tests.

2012-03-09  Akim Demaille  <demaille@gostai.com>

	maint: update gnulib.
	* gnulib: update.
	* src/scan-gram.l: Don't use the (former version of) STREQ.

2012-03-06  Akim Demaille  <demaille@gostai.com>

	tests: be robust to POSIXLY_CORRECT being defined.
	* tests/local.at (AT_BISON_CHECK_NO_XML): Check if
	POSIXLY_CORRECT is defined, not if it is defined to 1.
	Reported by Lie Yan.
	http://lists.gnu.org/archive/html/bug-bison/2012-03/msg00000.html

2012-02-23  Akim Demaille  <demaille@gostai.com>

	doc: fix environment issues.
	* doc/bison.texinfo: Do not use @verbatim, in particular when
	we use @group inside.
	Use @quotation instead of @display for frequently asked questions,
	it looks much nicer.

2012-02-23  Akim Demaille  <demaille@gostai.com>

	regen.
	* src/parse-gram.h, src/parse-gram.c: regen.

2012-02-23  Akim Demaille  <demaille@gostai.com>

	tests: fix regressions.
	Exit status 63 is documented for version-mismatch.
	* bootstrap.conf (gnulib_modules): Remove sysexits.
	* src/system.h (EX_MISMATCH): Define.
	* src/parse-gram.y (version_check): Use it instead of EX_CONFIG.

	Missing includes.
	* tests/calc.at, tests/named-refs.at: Include assert.h.

2012-02-21  Akim Demaille  <demaille@gostai.com>

	glr: fix ambiguity reports.
	* tests/glr-regression.at (Ambiguity reports): New.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	doc: stylistic improvements.
	* doc/bison.texinfo: Prefer "continue" to empty loop bodies.
	Add some @group/@end group to avoid poor page breaks.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	maint: address sc_prohibit_doubled_word.
	* data/yacc.c, doc/bison.texinfo: Reword to avoid having to
	disable that check.
	* cfg.mk: No longer skip this test.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	maint: address sc_prohibit_always-defined_macros.
	* cfg.mk: No longer skip it, except where EXIT_SUCCESS is used
	as a witness for stdlib.h.
	Skip this test when appropriate.
	* data/yacc.c: Drop a note about why EXIT_SUCCESS is defined here.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	maint: address sc_bindtextdomain, sc_program_name and sc_prohibit_HAVE_MBRTOWC.
	* bootstrap.conf (gnulib_modules): Require progname.
	* src/complain.c, src/getargs.c, src/getargs.h, src/main.c: Use it.
	* cfg.mk (exclude): New.
	Use it.
	Skip lib/main.c for bindtextdomain and set_program_name.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	maint: remove stray file.
	* config.hin: Remove.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	maint: address some syntax-issues remaining after cherry-picking from master.
	* cfg.mk: Skip bison generated files, 2.5 is generating trailing
	blanks.  This is already fixed in master.
	* tests/conflicts.at, tests/java.at: Fix white space issues.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	regen.
	* src/parse-gram.c, src/parse-gram.h: Regen.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	bitset: fix an incorrect error message.
	* lib/bitset_stats.c: here.
	Reported by Stefano Lattarini.

2012-02-19  Jim Meyering  <meyering@redhat.com>

	maint: reenable sc_m4_quote_check
	* cfg.mk (local-checks-to-skip): Reenable sc_m4_quote_check.
	* m4/dmalloc.m4: Add quotes.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	maint: remove trailing empty lines.
	* cfg.mk: No longer skip sc_prohibit_empty_lines_at_EOF, except
	for parse-gram.h (generated).
	* examples/mfcalc/.gitignore, lib/.gitignore, m4/.gitignore,
	* po/.gitignore, runtime-po/.gitignore: Remove trailing/leading
	empty lines.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	maint: avoid "magic number exit".
	* cfg.mk (local-checks-to-skip): No longer skip it.
	* bootstrap.conf (gnulib_modules): Add sysexits.
	* doc/bison.texinfo, etc/bench.pl.in, src/parse-gram.y,
	* src/system.h, tests/calc.at, tests/named-refs.at: Use assert
	where appropriate instead of "if (...) exit".
	Use symbolic exit status elsewhere.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	maint: fix some syntax-check issues.
	* cfg.mk (local-checks-to-skip): Remove
	sc_prohibit_quotearg_without_use, sc_prohibit_strcmp,
	sc_unmarked_diagnostics, sc_useless_cpp_parens.
	(sc_unmarked_diagnostics): Skip DJGPP.
	* data/yacc.c, src/LR0.c, src/closure.c,
	* src/flex-scanner.h, src/gram.c, src/lalr.c,
	* src/print-xml.c, src/print.c, src/print_graph.c,
	* src/reader.c, src/reduce.c, src/tables.c:
	Don't use parens with cpp's defined.
	Remove useless includes.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	maint: address a couple of syntax-check errors.
	* cfg.mk (local-checks-to-skip): Remove sc_error_message_period
	and sc_error_message_uppercase.
	Address the uncovered issues.
	* po/POTFILES.in: Add missing files.
	* src/symtab.c: Remove useless includes.
	* lib/bitset_stats.c, src/files.c, tests/glr-regression.at: Use
	conformant error messages.

2012-02-19  Akim Demaille  <demaille@gostai.com>

	maint: gnulib: upgrade.

2012-02-15  Akim Demaille  <demaille@gostai.com>

	maint: rely on Automake for parsers.
	* Makefile.am (AM_YFLAGS): Automake looks for "-d" alone.
	Move other options in here.
	(BISON): New.
	(YACC): Use it.
	(bison_SOURCES): Now that automake can see `-d' in AM_YFLAGS,
	we can rely on it to compile and ship the parser header
	files.

	Based on commit 737406a32c201471699bfa0843d1f432f3ec29ab and
	commit 3d6ca339083c278d907c9f030f4ba6bc5ecb07f2.

2012-02-14  Akim Demaille  <demaille@gostai.com>

	maint: more authors.
	* AUTHORS: here.
	Suggested by Tys Lefering.

2012-02-14  Akim Demaille  <demaille@gostai.com>

	maint: add license headers.
	* examples/calc++/test, examples/variant.yy, AUTHORS, THANKS,
	* tests/atlocal.in, tests/bison.in: Add license headers.
	Reported by Tys Lefering.

2012-02-14  Akim Demaille  <demaille@gostai.com>

	maint: remove obsolete file.
	* etc/make-ChangeLogs: Remove (used for rcs to cvs migration!).
	Reported by Tys Lefering.

2012-02-08  Akim Demaille  <demaille@gostai.com>

	use a more consistent quoting style.
	See <http://lists.gnu.org/archive/html/bug-bison/2012-01/msg00120.html>.
	Use quotearg as often as possible instead of leaving the choice of
	the quotes to the translators.  Use shorter messages.  Factor similar
	messages to a single format, to make localization easier.

	* src/files.c, src/getargs.c, src/muscle-tab.c, src/reader.c
	* src/scan-code.l, src/scan-gram.l, src/symtab.c:
	Use quote() or quotearg_colon() on printf arguments instead of
	quotes in the format string.
	* data/bison.m4: Keep sync with the changes in muscle-tab.c.

	* tests/skeletons.at, tests/input.at, tests/regression.at: Adjust
	expected messages.

2012-01-31  Akim Demaille  <demaille@gostai.com>

	maint: remove stray debug code.
	* src/Makefile.am (echo): Remove.

2012-01-31  Akim Demaille  <demaille@gostai.com>

	maint: space changes.
	* src/Makefile.am: Use 2 leading spaces for variable definition
	spreading over several lines.

2012-01-31  Akim Demaille  <demaille@gostai.com>

	maint: more silent-rules.
	* doc/local.mk, src/local.mk, examples/calc++/Makefile.am: Use
	$(AM_V_GEN) and $(AM_V_at) where appropriate.

2012-01-31  Jim Meyering  <meyering@redhat.com>

	do not ignore errors like ENOSPC,EIO when writing to stdout
	Standard output was never explicitly closed, so we could not
	detect failure.  Thus, bison would ignore the errors of writing
	to a full file system and getting an I/O error on write, but only
	for standard output, e.g., for --print-localedir, --print-datadir,
	--help and some verbose output.
	Now, "bison --print-datadir > /dev/full" reports the write failure:
	bison: write error: No space left on device
	Before, it would exit 0 with no diagnostic, implying success.
	This is not an issue for "--output=-" or the other FILE-accepting
	command-line options, because unlike most other GNU programs,
	an output file argument of "-" is treated as the literal "./-",
	rather than standard output.
	* bootstrap.conf (gnulib_modules): Add closeout.
	* src/main.c: Include "closeout.h".
	Use atexit to ensure we close stdout.
	* .gitignore: Ignore new files pulled in via gnulib-tool.

2012-01-26  Akim Demaille  <demaille@gostai.com>

	tests: fix expected output.
	* tests/actions.at (YYBACKUP): here.

2012-01-26  Akim Demaille  <demaille@gostai.com>

	yacc: fix YYBACKUP.
	Reported by David Kastrup:
	https://lists.gnu.org/archive/html/bug-bison/2011-10/msg00002.html.

	* data/yacc.c (YYBACKUP): Accept rhs size.
	Restore the proper state value.
	* TODO (YYBACKUP): Make it...
	* tests/actions.at: a new test case.
	* NEWS, THANKS: Update.

2012-01-26  Akim Demaille  <demaille@gostai.com>

	maint: update TODO.
	* TODO (Labeling the symbols): Remove, it's done ("Name references").

2012-01-26  Akim Demaille  <demaille@gostai.com>

	maint: update THANKS.
	* THANKS: Update Tys's address, on his request.

2012-01-26  Akim Demaille  <demaille@gostai.com>

	maint: fix --gcc-warnings support.
	* configure.ac: Use enable_gcc_warnings instead of enableval,
	which is valid only with AC_ARG_ENABLE.

2012-01-26  Akim Demaille  <demaille@gostai.com>

	maint: silent-rules.
	* configure.ac: Ask for silent-rules support.
	Enable it by default.

2012-01-26  Akim Demaille  <demaille@gostai.com>

	maint: remove trailing blanks.
	* src/scan-code.l: Here.

2012-01-25  Paul Eggert  <eggert@cs.ucla.edu>

	tests: port to Solaris 10 'diff -u'
	* tests/regression.at (parse-gram.y: LALR = IELR): Port to Solaris 10,
	where "diff -u X X" outputs "No differences encountered"
	instead of outputting nothing.  Reported by Tomohiro Suzuki in
	<http://lists.gnu.org/archive/html/bug-bison/2012-01/msg00101.html>.

2012-01-25  Jim Meyering  <meyering@redhat.com>

	build: avoid possibly-replaced fprintf in liby-source, yyerror.c
	* lib/yyerror.c (yyerror): Use fputs and fputc rather than fprintf
	with a mere "%s\n" format.  Always return 0 now, on the assumption
	that the return value was never used anyway.
	Don't include <config.h> after all.  This avoids a problem
	reported by Thiru Ramakrishnan in
	http://lists.gnu.org/archive/html/help-bison/2011-11/msg00000.html
	* cfg.mk: Exempt lib/yyerror.c from the sc_require_config_h_first test.
	* THANKS: Update.

2012-01-24  Jim Meyering  <meyering@redhat.com>

	maint: generate ChangeLog from git log
	* Makefile.am (gen-ChangeLog): New rule.
	(dist-hook): Depend on it.
	(EXTRA_DIST): Distribute the two ChangeLog-* files.
	* bootstrap.conf (gnulib_modules): Add gitlog-to-changelog.
	(bootstrap_post_import_hook): Ensure that ChangeLog exists.
	* build-aux/git-log-fix: New file.
	* ChangeLog-2012: Renamed ...
	* ChangeLog: ... from this.
	* ChangeLog-1998: Renamed ...
	* OChangeLog: ...from this
	* .gitignore: Add ChangeLog.

2012-01-24  Jim Meyering  <meyering@redhat.com>

	change more quotes in source, and adjust tests to match
	Run this command to change each `%s' to '%s' in source directories:
	  git grep -l '`%s'\' src djgpp data \
	    |xargs perl -pi -e '$q="'\''";s/`%s$q/$q%s$q/g'
	* data/bison.m4: Affected per the above.
	* djgpp/subpipe.c: Likewise.
	* src/files.c: Likewise.
	* src/getargs.c: Likewise.
	* src/muscle-tab.c: Likewise.
	* src/reader.c: Likewise.
	* tests/glr-regression.at: Adjust to match.
	* tests/input.at: Likewise.
	* tests/push.at: Likewise.
	* tests/skeletons.at: Likewise.

2012-01-23  Jim Meyering  <meyering@redhat.com>

	quote consistently and make tests pass with new quoting from gnulib
	Updating to gnulib pulled in new quote and quotarg modules,
	by which quoting is now done like 'this' rather than `this'.
	That change induces many "make check" test failures.  This change
	adapts code and tests so that "make check" passes once again.
	* src/scan-code.l: Quote like 'this', not like `this'.
	* src/scan-gram.l: Likewise.
	* src/symtab.c: Likewise.
	* tests/actions.at: Adjust tests to match.
	* tests/input.at: Likewise.
	* tests/named-refs.at: Likewise.
	* tests/output.at: Likewise.
	* tests/regression.at: Likewise.
	* lib/.gitignore: Regenerate.
	* m4/.gitignore: Likewise.

2012-01-23  Jim Meyering  <meyering@redhat.com>

	build: update gnulib and autoconf submodules to latest (cherry picked from commit 728415f885e5cb8e518c8576fa6e1f541e384130)

2012-01-23  Jim Meyering  <meyering@redhat.com>

	build: manually update bootstrap from gnulib, and adapt
	Updating to the latest bootstrap from gnulib involves more of a
	change than usual, and updating to the latest gnulib would involve
	its own set of challenges with the upcoming quoting changes, so
	we update bootstrap manually and separately.
	* bootstrap: Update from gnulib.
	* lib/Makefile.am: Initialize more variables to empty, so that gnulib.mk
	can append to them with "+=".
	* bootstrap.conf (gnulib_mk_hook): Remove.  No longer honored.
	(gnulib_tool_option_extras): Generate gnulib.mk.

2012-01-23  Jim Meyering  <meyering@redhat.com>

	maint: include <config.h> first
	* cfg.mk (exclude_file_name_regexp--sc_require_config_h_first):
	Exempt data/glr.c and data/yacc.c from the include-config.h-first
	requirement.

2012-01-23  Jim Meyering  <meyering@redhat.com>

	build: include <config.h> from lib/yyerror.c
	* lib/yyerror.c: Include <config.h>.

2012-01-23  Jim Meyering  <meyering@redhat.com>

	maint: list djgpp/subpipe.c in po/POTFILES.in
	* po/POTFILES.in: Add djgpp/subpipe.c.

2012-01-23  Jim Meyering  <meyering@redhat.com>

	maint: placate the space-TAB syntax-check
	* cfg.mk (exclude_file_name_regexp--sc_space_tab): Exempt
	tests/input.at and tests/c++.at, since they appear to use
	SP-TAB sequences deliberately.
	* OChangeLog: Remove space-before-TAB.

2012-01-23  Jim Meyering  <meyering@redhat.com>

	doc: correct typo: s/can not/cannot/
	* doc/bison.texinfo (Bug Reports): s/can not/cannot/
	And remove trailing blanks.

2012-01-22  Jim Meyering  <meyering@redhat.com>

	maint: get gpl-3.0 from gnulib
	* bootstrap.conf (gnulib_modules): Add gpl-3.0.
	* doc/gpl-3.0.texi: Remove from version control, now that
	we get it via gnulib.
	* doc/.gitignore: Ignore it.