src/devices/tech/config/filesystem.jd

page.title=Configuring the File System
@jd:body

<!--
    Copyright 2015 The Android Open Source Project

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
-->

<div id="qv-wrapper">
  <div id="qv">
    <h2>In this document</h2>
    <ol id="auto-toc">
    </ol>
  </div>
</div>

<h2 id=abstract>Abstract</h2>

<p>This document describes impending changes to the manner in which the Android
file system is configured.</p>

<p>The Android file system configuration file (<code>system/core/include/private/android_filesystem_config.h</code>) is not extensible in that device manufacturers have no means to add their own
named binaries to the list to specify Discretionary Access Controls (DAC) of
ownership, access mode, or executable capabilities. This limitation is shown
with the introduction of support for Linux kernels 3.14 and higher where the
wake lock is enabled via a capability <code>CAP_SUSPEND_BLOCK</code>; partner-supplied GPS daemons will need to hold this wake lock and thus have
this capability set in the file system.</p>

<p>Therefore, the Android M release is planned to move both the <code>fs_config</code> inline and the structure definitions in <code>system/core/include/private/android_filesystem_config.h</code> that it feeds on into <code>system/core/libcutils/fs_config.c</code> to be updated or overridden by binary files installed in <code>/system/etc/fs_config_dirs </code>and<code> /system/etc/fs_config_files</code>.</p>

<h2 id=implementation>Implementation</h2>

<p>Separate matching and parsing rules exist for directories and files. Files get
the advantage of utilizing additional glob expressions. Files and Directories
are handled separately by two different tables.</p>

<p>The Android M release will remove the <code>fs_config</code> inline and the structure definitions that it feeds on, and place the code and
default definitions into <code>system/core/libcutils/fs_config.c</code>. The <code>fs_config.c</code> file is modified beyond the basic definition to allow runtime reading of <code>/system/etc/fs_config_dirs</code> and <code>/system/etc/fs_config_files</code> to garner override that the device manufacturer would wish to extend. The same
files accessed during build time to construct filesystem images as <code>${OUT}/system/etc/fs_config_dirs</code> and <code>${OUT}/system/etc/fs_config_files</code> may be used on the host.</p>

<p><strong>Caution</strong>: This change is disruptive, as it removes some includes, structures and inline
definitions; it also adds a need to refer to <code>libcutils</code> instead of running directly from <code>system/core/include/private/android_filesystem_config.h</code>. It also requires all device manufacturers to be informed that the location
for adjustments for file system configuration has changed.</p>

<p>There is also a tool to generate the aligned binary files <code>/system/etc/fs_config_dirs</code> and <code>/system/etc/fs_config_files</code> content that is delivered on the target.</p>

<p>A new function in <code>libcutils</code> - <code>fs_config_generate()</code> - is used to manage the DAC requirements into a buffer. <code>build/tools/fs_config</code> in turn houses the new tool <code>fs_config_generate</code> that uses this library function and defines rules for an include file to
institutionalize the DAC rules. It expects an include file in <code>device/<vendor>/<device>/android_filesystem_config.h</code> to act as the override in <code>structure fs_path_config</code> format as defined in <code>system/core/include/private/android_filesystem_config.h</code>, except defining the structure initialization for the symbols struct
fs_path_config android<strong>_device</strong>_dirs[] and struct fs_path_config android<strong>_device</strong>_files[] for directories and files, respectively. See the example below.</p>

<p>The override file may also be specified using <code>TARGET_ANDROID_FILESYSTEM_CONFIG_H </code>in the board configuration, with an enforced basename of <code>android_filesystem_config.h</code>. Finally, <code>PRODUCT_PACKAGES</code> must include <code>fs_config_dirs</code> and/or <code>fs_config_files</code> in order to install them to <code>/system/etc/fs_config_dirs</code> and <code>/system/etc/fs_config_files</code>, respectively.</p>

<h3 id=instructions>Instructions</h3>

<p>Follow these steps to configure the Android file system in the M release and
later.</p>

<ol>
  <li> Create the <code>$(TARGET_DEVICE_DIR)/android_filesystem_config.h</code> file
  <li> Add the <code>fs_config_dirs</code> and/or <code>fs_config_files</code> to <code>PRODUCT_PACKAGES </code>in the board configuration file (eg: <code>$(TARGET_DEVICE_DIR)/device.mk</code>)
</ol>

<h3 id=example>Example</h3>

<p>In order to activate an override for the<code> system/bin/glgps</code> daemon to add wake lock support, one would do something like this within the <code>device/<vendor>/<device></code> directory (in patch format, relevant actions are highlighted for clarity):</p>

<pre>
diff --git a/android_filesystem_config.h b/android_filesystem_config.h
new file mode 100644
index 0000000..874195f
--- /dev/null
+++ b/android_filesystem_config.h
&#64;&#64; -0,0 +1,36 &#64;&#64;
+/*
+ * Copyright (C) 2015 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * permissions and limitations under the License.
+ */
+
+/* This file is used to define the properties of the filesystem
+** images generated by build tools (eg: mkbootfs) and
+** by the device side of adb.
+*/
+
+#define NO_ANDROID_FILESYSTEM_CONFIG_DEVICE_DIRS
+/* static const struct fs_path_config android_device_dirs[] = { }; */
+
+/* Rules for files.
+** These rules are applied based on "first match", so they
+** should start with the most specific path and work their
+** way up to the root. Prefixes ending in * denotes wildcard
+** and will allow partial matches.
+*/
+static const struct fs_path_config android_device_files[] = {
+  { 00755, AID_ROOT, AID_SHELL, (1ULL &lt;&lt; CAP_BLOCK_SUSPEND),
"system/bin/glgps" },
+#ifdef NO_ANDROID_FILESYSTEM_CONFIG_DEVICE_DIRS
+  { 00000, AID_ROOT, AID_ROOT, 0, "system/etc/fs_config_dirs" },
+#endif
+};


diff --git a/device.mk b/device.mk
index 0c71d21..235c1a7 100644
--- a/device.mk
+++ b/device.mk
&#64;&#64; -18,7 +18,8 &#64;&#64; PRODUCT_PACKAGES := \
     libwpa_client \
     hostapd \
     wpa_supplicant \
-    wpa_supplicant.conf
+    wpa_supplicant.conf \
+    fs_config_files
 
 ifeq ($(TARGET_PREBUILT_KERNEL),)
 ifeq ($(USE_SVELTE_KERNEL), true)
</pre>

<h3 id=checklist>Checklist</h3>

<ol>
  <li> <code>NO_ANDROID_FILESYSTEM_CONFIG_DEVICE_DIRS</code> and <code>NO_ANDROID_FILESYSTEM_CONFIG_DEVICE_FILES</code> are available to be defined when android_device_dirs[] and
android_device_files[] is not being filled out.

  <li> Each structure entry is the mode, uid, gid, capabilities and the name. <code>system/core/include/private/android_filesystem_config.h</code> has been included already automatically to provide the manifest defines (<code>AID_ROOT</code>, <code>AID_SHELL</code>, <code>CAP_BLOCK_SUSPEND</code> in the above).

  <li> The action above in the example android_device_files[] to suppress access to <code>system/etc/fs_config_dirs</code> when we have not specified it will act as an additional DAC protection for our
lack of any content for the directory overrides. It is considered pedantic weak
protection since if someone has control over<code> /system</code>, they can typically do anything they want.

  <li> The build system searches for the custom <code>android_filesystem_config.h</code> in <code>$(TARGET_DEVICE_DIR)</code>, in which the BoardConfig.mk exists. You can also set board config variable <code>TARGET_ANDROID_FILESYSTEM_CONFIG_H</code> to point to the file, if it exists elsewhere.

  <li> On the target system, we reserve the right to apply SELinux Mandatory Access
Controls (MAC) to these configuration files. Please check if you have custom
target executables that utilize fs_config() to make sure you permit access if
not provided otherwise.
</ol>

<h3 id=architectural_concerns>Architectural Concerns</h3>

<ul>
  <li> Device manufacturer private branch copies of the <code>system/core/include/private/android_filesystem_config.h</code> with extra content on existing targets will have to move over to: <code>device/<vendor>/<device>/android_filesystem_config.h</code>
  <li> Device manufacturer private executables that depend on <code>system/code/include/private_filesystem_config.h</code> for the file or directory structures or <code>fs_config</code> will have to add <code>libcutils</code> library dependencies.