page.title=Configuring the Products
@jd:body

<!--
    Copyright 2015 The Android Open Source Project

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
-->
<div id="qv-wrapper">
  <div id="qv">
    <h2>In this document</h2>
    <ol id="auto-toc">
    </ol>
  </div>
</div>

<p>Use the information in this page to create the Makefiles for your device and product.</p>

<h2 id="build-layers">Understand Build Layers</h2>

<p>The build hierarchy includes the abstraction layers that correspond to the
physical makeup of a device. These layers are described in the table below.
Each layer relates to the one above it in a one-to-many relationship. For
example, an architecture can have more than one board and each board can have
more than one product. You may define an element in a given layer as a
specialization of an element in the same layer, thus eliminating copying and
simplifying maintenance.</p>

<table>
 <tbody><tr>
  <th>Layer</th>
  <th>Example</th>
  <th>Description</th>
 </tr>
  <tr>
    <td>Product</td>
    <td>myProduct, myProduct_eu, myProduct_eu_fr, j2, sdk</td>
    <td><p>The product layer defines the feature specification of a shipping product such as the modules to build,
    locales supported, and the configuration for various locales. In other words, this is the name of the
    overall product. Product-specific variables are defined in product definition Makefiles. A product
     can inherit from other product definitions,
    which simplifies maintenance. A common method is to create a base product that contains features that apply
    for all products, then creating product variants based on that base product. For example, you can have
    two products that differ only by their radios (CDMA vs GSM) inherit from the same base product that does not define a radio.
</td>

  </tr>
 <tr>
    <td>Board/Device</td>
    <td>sardine, trout, goldfish</td>
    <td>The device/board layer represents the physical layer of plastic on the
    device (i.e. the industrial design of the device). For example, North American
    devices probably include QWERTY keyboards whereas devices sold in France
    probably include AZERTY keyboards. This layer also represents the bare
    schematics of a product. These include the peripherals on the board and their
    configuration. The names used are merely codes for different board/device configurations.</td>
  </tr>
<tr>
    <td>Arch</td>
    <td>arm, x86, mips, arm64, x86_64, mips64</td>
    <td>The architecture layer describes the processor configuration and ABI (Application Binary Interface) running on the board. </td>
  </tr>
</table>

<h2 id="build-variants">Use Build Variants</h2>

<p>When building for a particular product, it's often useful to have minor
variations on what is ultimately the final release build. In a module
definition, the module can specify tags with <code>LOCAL_MODULE_TAGS</code>,
which can be one or more values of <code>optional</code> (default),
<code>debug</code>, <code>eng</code>.</p>

<p>If a module doesn't specify a tag (by <code>LOCAL_MODULE_TAGS</code>), its
tag defaults to <code>optional</code>. An optional module is installed only if
it is required by product configuration with <code>PRODUCT_PACKAGES</code>.

<p>These are the currently-defined build variants:</p>

<table border=1>
<tr>
    <td>
        <code>eng<code>
    </td>
    <td>
        This is the default flavor.
        <ul>
        <li>Installs modules tagged with: <code>eng</code> and/or <code>debug</code>.
        <li>Installs modules according to the product definition files, in addition to tagged modules.</li>
        <li><code>ro.secure=0</code>
        <li><code>ro.debuggable=1</code>
        <li><code>ro.kernel.android.checkjni=1</code>
        <li><code>adb</code> is enabled by default.
    </td>
</tr>
<tr>
    <td>
        <code>user<code>
    </td>
    <td>
        This is the flavor intended to be the final release bits.
        <ul>
        <li>Installs modules tagged with <code>user</code>.</li>
        <li>Installs modules according to the product definition files, in addition to tagged modules.</li>
        <li><code>ro.secure=1</code> </li>
        <li><code>ro.debuggable=0</code> </li>
        <li><code>adb</code> is disabled by default.</li>
    </td>
</tr>
<tr>
    <td>
        <code>userdebug<code>
    </td>
    <td>
        The same as <code>user</code>, except:
        <ul>
        <li>Also installs modules tagged with <code>debug</code>.
        <li><code>ro.debuggable=1</code>
        <li><code>adb</code> is enabled by default.
    </td>
</tr>
</table>

<h2 id="build-a-product">Build a Product</h2>

<p>
There are many ways to organize the source files for your device. We'll briefly
go over how the Nexus 6 implementation was organized as an example, but you can
organize your source files and build the way you see fit.
</p>
<p>
Nexus 6 was implemented with a main device configuration named
<code>shamu</code>. From this device configuration, a product is created with a
product definition Makefile that declares product-specific information about
the device such as the name and model. You can view the
<code>device/moto/shamu</code> directory to see how all of this is setup.
</p>
<h3 id="makefiles">Write the Makefiles</h2>
<p>
  The following steps describe how to set up product Makefiles in a way similar
to that of the Nexus 6 product line:
</p>
<ol>
  <li>Create a <code>device/&lt;company_name&gt;/&lt;device_name&gt;</code> directory for your
  product. For example, <code>device/moto/shamu</code>. This directory will contain source code
  for your device along with the Makefiles to build them.
  </li>

  <li>Create a <code>device.mk</code> Makefile that declares the files and modules needed for the
  device. For an example, see <code>device/moto/shamu/device.mk</code>.
  </li>

  <li>Create a product definition Makefile to create a specific product based on the device. The
  following Makefile is taken from <code>device/moto/shamu/aosp_shamu.mk</code> as an example.
  Notice the product is inheriting from the
  <code>device/moto/shamu/device.mk</code> and
  <code>vendor/moto/shamu/device-vendor.mk</code> files via the Makefile while
  also declaring the product-specific information such as name, brand, and model.

<pre>
# Inherit from the common Open Source product configuration
$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)

PRODUCT_NAME := aosp_shamu
PRODUCT_DEVICE := shamu
PRODUCT_BRAND := Android
PRODUCT_MODEL := AOSP on Shamu
PRODUCT_MANUFACTURER := motorola
PRODUCT_RESTRICT_VENDOR_FILES := true

$(call inherit-product, device/moto/shamu/device.mk)
$(call inherit-product-if-exists, vendor/moto/shamu/device-vendor.mk)

PRODUCT_NAME := aosp_shamu

PRODUCT_PACKAGES += \
    Launcher3
</pre>

    <p>
      See <a href="#prod-def">Product Definition Variables</a> for additional product-specific
      variables you can add to your Makefiles.
    </p>
  </li>

  <li>Create an <code>AndroidProducts.mk</code> file that points to the product's Makefiles. In
  this example, only the product definition Makefile is needed. The example below is from
  <code>device/moto/shamu/AndroidProducts.mk</code>:
    <pre>
#
# This file should set PRODUCT_MAKEFILES to a list of product makefiles
# to expose to the build system.  LOCAL_DIR will already be set to
# the directory containing this file.
#
# This file may not rely on the value of any variable other than
# LOCAL_DIR; do not use any conditionals, and do not look up the
# value of any variable that isn't set in this file or in a file that
# it includes.
#

PRODUCT_MAKEFILES := \
    $(LOCAL_DIR)/aosp_shamu.mk
</pre>
  </li>

  <li>Create a <code>BoardConfig.mk</code> Makefile that contains board-specific configurations.
  For an example, see <code>device/moto/shamu/BoardConfig.mk</code>.
  </li>

  <li>Create a <code>vendorsetup.sh</code> file to add your product (a "lunch combo") to the build
  along with a <a href="#build-variants">build variant</a> separated by a dash. For example:
<pre>
add_lunch_combo &lt;product_name&gt;-userdebug
</pre>
  </li>

  <li>At this point, you can create more product variants based on the same device.
  </li>

</ol>
<h3 id="prod-def">Set Product Definition Variables</h3>
<p>
  Product-specific variables are defined in the product's Makefile. Variables maintained in a
  product definition files include:
</p>
<table>
  <tbody>
    <tr>
      <th>
        Parameter
      </th>
      <th>
        Description
      </th>
      <th>
        Example
      </th>
    </tr>
    <tr>
      <td>
        PRODUCT_AAPT_CONFIG
      </td>
      <td>
        <code>aapt</code> configurations to use when creating packages
      </td>
      <td></td>
    </tr>
    <tr>
      <td>
        PRODUCT_BRAND
      </td>
      <td>
        The brand (e.g., carrier) the software is customized for, if any
      </td>
      <td></td>
    </tr>
    <tr>
      <td>
        PRODUCT_CHARACTERISTICS
      </td>
      <td>
        <code>aapt</code> characteristics to allow adding variant-specific resources to a package.
      </td>
      <td>
        tablet,nosdcard
      </td>
    </tr>
    <tr>
      <td>
        PRODUCT_COPY_FILES
      </td>
      <td>
        List of words like <code>source_path:destination_path</code>. The file at the source path
        should be copied to the destination path when building this product. The rules for the copy
        steps are defined in config/Makefile
      </td>
      <td></td>
    </tr>
    <tr>
      <td>
        PRODUCT_DEVICE
      </td>
      <td>
        Name of the industrial design. This is also the board name, and the build system uses it to locate the <code>BoardConfig.mk.</code>
      </td>
      <td>
        <code>tuna</code>
      </td>
    </tr>
    <tr>
      <td>
        PRODUCT_LOCALES
      </td>
      <td>
        A space-separated list of two-letter language code, two-letter country code pairs that
        describe several settings for the user, such as the UI language and time, date and currency
        formatting. The first locale listed in PRODUCT_LOCALES is used as the product's default locale.
      </td>
      <td>
        <code>en_GB de_DE es_ES fr_CA</code>
      </td>
    </tr>
    <tr>
      <td>
        PRODUCT_MANUFACTURER
      </td>
      <td>
        Name of the manufacturer
      </td>
      <td>
        <code>acme</code>
      </td>
    </tr>
    <tr>
      <td>
        PRODUCT_MODEL
      </td>
      <td>
        End-user-visible name for the end product
      </td>
      <td></td>
    </tr>
    <tr>
      <td>
        PRODUCT_NAME
      </td>
      <td>
        End-user-visible name for the overall product. Appears in the Settings &gt; About screen.
      </td>
      <td></td>
    </tr>
    <tr>
      <td>
        PRODUCT_OTA_PUBLIC_KEYS
      </td>
      <td>
        List of Over the Air (OTA) public keys for the product
      </td>
      <td></td>
    </tr>
    <tr>
      <td>
        PRODUCT_PACKAGES
      </td>
      <td>
        Lists the APKs and modules to install.
      </td>
      <td>
        <code>Calendar Contacts</code>
      </td>
    </tr>
    <tr>
      <td>
        PRODUCT_PACKAGE_OVERLAYS
      </td>
      <td>
        Indicate whether to use default resources or add any product specific overlays
      </td>
      <td>
        <code>vendor/acme/overlay</code>
      </td>
    </tr>
    <tr>
      <td>
        PRODUCT_PROPERTY_OVERRIDES
      </td>
      <td>
        List of system property assignments in the format "key=value"
      </td>
      <td></td>
    </tr>
  </tbody>
</table>