diff --git a/src/source/code-style.jd b/src/source/code-style.jd
index 9ec3c99..ee65c27 100644
--- a/src/source/code-style.jd
+++ b/src/source/code-style.jd
@@ -277,8 +277,7 @@
 <h3 id="define-fields-in-standard-places">Define Fields in Standard Places</h3>
 <p>Fields should be defined either at the top of the file, or immediately before the methods that use them.</p>
 <h3 id="limit-variable-scope">Limit Variable Scope</h3>
-<p>The scope of local variables should be kept to a minimum (<em>Effective
-Java</em> Item 29). By doing so, you increase the readability and
+<p>The scope of local variables should be kept to a minimum. By doing so, you increase the readability and
 maintainability of your code and reduce the likelihood of error. Each variable
 should be declared in the innermost block that encloses all uses of the
 variable.</p>
@@ -537,8 +536,7 @@
 <p>Both the JDK and the Android code bases are very inconsistent with regards
 to acronyms, therefore, it is virtually impossible to be consistent with the
 code around you. Bite the bullet, and treat acronyms as words.</p>
-<p>For further justifications of this style rule, see <em>Effective Java</em>
-Item 38 and <em>Java Puzzlers</em> Number 68.</p>
+
 <h3 id="use-todo-comments">Use TODO Comments</h3>
 <p>Use TODO comments for code that is temporary, a short-term solution, or
 good-enough but not perfect.</p>
@@ -553,10 +551,9 @@
 specific event ("Remove this code after all production mixers understand
 protocol V7.").</p>
 <h3 id="log-sparingly">Log Sparingly</h3>
-<p>While logging is necessary it has a significantly negative impact on
+<p>While logging is necessary, it has a significantly negative impact on
 performance and quickly loses its usefulness if it's not kept reasonably
-terse. The logging facilities provides five different levels of logging. Below
-are the different levels and when and how they should be used.</p>
+terse. The logging facilities provides five different levels of logging:</p>
 <ul>
 <li>
 <p><code>ERROR</code>: 
diff --git a/src/source/developing.jd b/src/source/developing.jd
index 64c24c2..e6a97b5 100644
--- a/src/source/developing.jd
+++ b/src/source/developing.jd
@@ -76,13 +76,15 @@
 <p>To start a topic branch using Repo, navigate into the project to be modified and issue: </p>
 <pre><code>$ repo start BRANCH_NAME .
 </code></pre>
-<p>To verify that your new branch was created:</p>
-<pre><code>$ repo status
+<p>Please note, the period represents the project in the current working directory. To verify your new branch was created:</p>
+<pre><code>$ repo status .
 </code></pre>
 <h2 id="using-topic-branches">Using topic branches</h2>
 <p>To assign the branch to a particular project:</p>
-<pre><code>$ repo start BRANCH_NAME PROJECT
+<pre><code>$ repo start BRANCH_NAME PROJECT_NAME
 </code></pre>
+<p>See <a href="https://android.googlesource.com/">android.googlesource.com</a> for a list of all projects. Again, if you've already navigated into a particular project directory, you may simply pass a period to represent the current project.</p>
+
 <p>To switch to another branch that you have created in your local work environment:</p>
 <pre><code>$ git checkout BRANCH_NAME
 </code></pre>
diff --git a/src/source/faqs.jd b/src/source/faqs.jd
index f08a896..58a9a21 100644
--- a/src/source/faqs.jd
+++ b/src/source/faqs.jd
@@ -321,5 +321,7 @@
 implement the 'adb' debugging utility. This means that any compatible device
 -- including ones available at retail -- must be able to run the CTS
 tests.</p>
+<h3 id="are-codecs-verified">Are codecs verified by CTS?</h3>
+<p>Yes. All mandatory codecs are verified by CTS.</p>
 
 <a href="#top">Back to top</a>
diff --git a/src/source/report-bugs.jd b/src/source/report-bugs.jd
index 027dcd2..300df54 100644
--- a/src/source/report-bugs.jd
+++ b/src/source/report-bugs.jd
@@ -78,7 +78,7 @@
 and a poor bug report.</p>
 
 <h2 id="a-poor-bug-report">A Poor Bug Report</h2>
-<pre>
+<blockquote>
 Title: Error message
 
 When running Eclipse I get an "Internal Error" that says "See the .log file for more details".
@@ -91,18 +91,18 @@
 
 Observed results:
 See above.
-</pre>
+</blockquote>
 <p>This is a poor bug report because it doesn't provide any context for the
 issue; is it a problem in the Dalvik virtual machine, the core framework, or
 something else? It also doesn't provide any code or hint on how to reproduce
 it. In other words, this bug report doesn't provide enough information for
 anyone to take action on, so it would be ignored.</p>
 <h2 id="a-good-bug-report">A Good Bug Report</h2>
-<pre>
+<blockquote>
 Title: Stepping over "Object o = null" causes Eclipse "Internal Error"
 
 Interesting bug, while using Eclipse 3.3.1.1 with m37a of android and the following code:
-
+<pre>
 package com.saville.android;
 
 import android.app.Activity;
@@ -125,7 +125,7 @@
 
     static final String TAG = "TestObjectNull";
 }
-
+</pre>
 Eclipse indicates an "Internal Error" with "See the .log file for more
 details" and then asks if I want to exit the workbench. This occurs when I
 place a break point on "setContentView(R.layout.main);" and then single
@@ -134,7 +134,7 @@
 If I change "Object o = null;" to "Object o" all is well.
 
 The last lines of the .log file are:
-
+<pre>
 !ENTRY org.eclipse.core.jobs 4 2 2008-01-01 13:04:15.825
 !MESSAGE An internal error occurred during: "has children update".
 !STACK 0
@@ -163,3 +163,4 @@
 org.eclipse.debug.internal.ui.model.elements.ElementContentProvider$3.run(ElementContentProvider.java:200)
         at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
 </pre>
+</blockquote>
diff --git a/src/source/submit-patches.jd b/src/source/submit-patches.jd
index 1c2dd0d..c41de25 100644
--- a/src/source/submit-patches.jd
+++ b/src/source/submit-patches.jd
@@ -199,7 +199,7 @@
 
 <h2 id="mksh">mksh</h2>
 <p>All changes to the MirBSD Korn Shell project at <code>external/mksh</code> should be made upstream
-either by sending an email to miros-mksh on the mirbsd.o®g domain (no subscription
+either by sending an email to miros-mksh on the mirbsd.org domain (no subscription
 required to submit there) or (optionally) at <a href="https://launchpad.net/mksh">Launchpad</a>.
 </p>
 <h2 id="openssl">OpenSSL</h2>
diff --git a/src/source/using-repo.jd b/src/source/using-repo.jd
index 67ca7b7..ce86c43 100644
--- a/src/source/using-repo.jd
+++ b/src/source/using-repo.jd
@@ -147,7 +147,7 @@
 <p><code>REPO_PATH</code> is the path relative to the root of the client.</p>
 </li>
 <li>
-<p><code>REPO_REMOTE</code> is the name of the remote sstem from the manifest.</p>
+<p><code>REPO_REMOTE</code> is the name of the remote system from the manifest.</p>
 </li>
 <li>
 <p><code>REPO_LREV</code> is the name of the revision from the manifest, translated to a local tracking branch.  Used if you need to pass the manifest revision to a locally executed git command.</p>