page.title=Viewing Network Usage Data
@jd:body

<!--
    Copyright 2015 The Android Open Source Project

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
-->

<p>Using the command <code>adb shell dumpsys netstats detail</code> provides
network usage statistics collected since the device booted up.</p>

<h2 id=input>Input</h2>


<p>To view network usage statistics, run the following command:</p>

<pre class=prettyprint>
$ adb shell dumpsys netstats detail
</pre>


<h2 id=output>Output</h2>


<p>The set of information reported varies depending on the version of Android but
consists of several sections: </p>

<ul>
  <li> Active interfaces
  <li> Active UID interfaces
  <li> Dev statistics
  <li> Xt statistics
  <li> UID statistics (sometimes also called "Detailed UID statistics")
  <li> UID tag statistics
</ul>

<h3 id=active_interfaces_active_uid_interfaces>Active interfaces/Active UID interfaces</h3>

<p>Here is sample output for the active interfaces and active UID interfaces
sections:</p>

<pre>
Active interfaces:
  iface=wlan0 ident=[{type=WIFI, subType=COMBINED, networkId="GoogleGuest"}]
Active UID interfaces:
  iface=wlan0 ident=[{type=WIFI, subType=COMBINED, networkId="GoogleGuest"}]
</pre>


<p>This shows network statistics for the whole device. In most cases, the
information in these two section is the same.</p>

<h3 id=dev_stats_xt_stats>Dev statistics/Xt statistics</h3>


<p>Here is sample output for the Dev statistics section:</p>

<pre>
Dev stats:
  Pending bytes: 170775
  Complete history:
  ident=[[type=MOBILE_HIPRI, subType=COMBINED, subscriberId=311111...]] uid=-1 set=ALL tag=0x0
    NetworkStatsHistory: bucketDuration=3600000
      bucketStart=1406138400000 activeTime=3603995 rxBytes=19467 rxPackets=53 txBytes=7500 txPackets=61 operations=0
      bucketStart=1406142000000 activeTime=20730 rxBytes=25403 rxPackets=66 txBytes=9140 txPackets=74 operations=0
      bucketStart=1406145600000 activeTime=29161 rxBytes=9263 rxPackets=37 txBytes=5180 txPackets=38 operations=0
      bucketStart=1406149200000 activeTime=9054 rxBytes=12387 rxPackets=31 txBytes=4052 txPackets=35 operations=0
  ident=[[type=WIFI, subType=COMBINED, networkId="MySSID"]] uid=-1 set=ALL tag=0x0
    NetworkStatsHistory: bucketDuration=3600000
      bucketStart=1406138400000 activeTime=4811082 rxBytes=335913292 rxPackets=265144 txBytes=9729261 txPackets=117220 operations=0
      bucketStart=1406142000000 activeTime=3513477 rxBytes=1193606876 rxPackets=956855 txBytes=29450792 txPackets=306634 operations=0
      bucketStart=1406145600000 activeTime=3297986 rxBytes=729381849 rxPackets=586396 txBytes=24247211 txPackets=237438 operations=0
      bucketStart=1406149200000 activeTime=3580941 rxBytes=57168575 rxPackets=51610 txBytes=5291167 txPackets=29260 operations=0
  ident=[[type=WIFI, subType=COMBINED, networkId="MySecondSSID"]] uid=-1 set=ALL tag=0x0
    NetworkStatsHistory: bucketDuration=3600000
</pre>

<h3 id=uid_stats>UID stats</h3>

<pre>
UID stats:
  Pending bytes: 744
  Complete history:
  ident=[[type=MOBILE_SUPL, subType=COMBINED, subscriberId=311111...], [type=MOBILE, subType=COMBINED, subscriberId=311111...]] uid=10007 set=DEFAULT tag=0x0
    NetworkStatsHistory: bucketDuration=7200000
      bucketStart=1406167200000 activeTime=7200000 rxBytes=4666 rxPackets=7 txBytes=1597 txPackets=10 operations=0
  ident=[[type=WIFI, subType=COMBINED, networkId="MySSID"]] uid=10007 set=DEFAULT tag=0x0
    NetworkStatsHistory: bucketDuration=7200000
      bucketStart=1406138400000 activeTime=7200000 rxBytes=17086802 rxPackets=15387 txBytes=1214969 txPackets=8036 operations=28
      bucketStart=1406145600000 activeTime=7200000 rxBytes=2396424 rxPackets=2946 txBytes=464372 txPackets=2609 operations=70
      bucketStart=1406152800000 activeTime=7200000 rxBytes=200907 rxPackets=606 txBytes=187418 txPackets=739 operations=0
      bucketStart=1406160000000 activeTime=7200000 rxBytes=826017 rxPackets=1126 txBytes=267342 txPackets=1175 operations=35
</pre>


<h3 id=interpreting_the_results>Interpreting the results</h3>


<p>To find the UID for your application, you can run this command:
<code>adb shell dumpsys package &lt;your package name&gt;</code>.
Then look for the line labeled <code>userId</code>.</p>

<p>In our example, suppose we are trying to find network usage for our app
“com.example.myapp”. We would run the following command:</p>

<pre>
$ adb shell dumpsys package com.example.myapp | grep userId

    userId=10007 gids=[3003, 1028, 1015]
</pre>

<p>Looking at the dump above, we look for lines that have uid=10007. Two such
lines exist, the first indicating a mobile connection, and the second a Wi-Fi
connection. Underneath each line, the number of bytes and packets sent and
received can be seen, bucketed into two-hour windows. </p>

<p>A bit more explanation:</p>

<ul>
  <li> <code>set=DEFAULT</code> indicates foreground
  network usage, while <code>set=BACKGROUND</code> indicates
background usage. <code>set=ALL</code> implies both.
  <li> <code>tag=0x0</code> indicates the socket tag associated with the traffic.
  <li> <code>rxBytes</code> and <code>rxPackets</code> represent received bytes and received packets in the
corresponding time interval.
  <li> <code>txBytes</code> and <code>txPackets</code> represent sent (transmitted) bytes and sent packets in
the corresponding time interval.
</ul>