| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package java.util; |
| |
| /** |
| * This is a near duplicate of {@link TimSort}, modified for use with |
| * arrays of objects that implement {@link Comparable}, instead of using |
| * explicit comparators. |
| * |
| * <p>If you are using an optimizing VM, you may find that ComparableTimSort |
| * offers no performance benefit over TimSort in conjunction with a |
| * comparator that simply returns {@code ((Comparable)first).compareTo(Second)}. |
| * If this is the case, you are better off deleting ComparableTimSort to |
| * eliminate the code duplication. (See Arrays.java for details.) |
| */ |
| class ComparableTimSort { |
| /** |
| * This is the minimum sized sequence that will be merged. Shorter |
| * sequences will be lengthened by calling binarySort. If the entire |
| * array is less than this length, no merges will be performed. |
| * |
| * This constant should be a power of two. It was 64 in Tim Peter's C |
| * implementation, but 32 was empirically determined to work better in |
| * this implementation. In the unlikely event that you set this constant |
| * to be a number that's not a power of two, you'll need to change the |
| * {@link #minRunLength} computation. |
| * |
| * If you decrease this constant, you must change the stackLen |
| * computation in the TimSort constructor, or you risk an |
| * ArrayOutOfBounds exception. See listsort.txt for a discussion |
| * of the minimum stack length required as a function of the length |
| * of the array being sorted and the minimum merge sequence length. |
| */ |
| private static final int MIN_MERGE = 32; |
| |
| /** |
| * The array being sorted. |
| */ |
| private final Object[] a; |
| |
| /** |
| * When we get into galloping mode, we stay there until both runs win less |
| * often than MIN_GALLOP consecutive times. |
| */ |
| private static final int MIN_GALLOP = 7; |
| |
| /** |
| * This controls when we get *into* galloping mode. It is initialized |
| * to MIN_GALLOP. The mergeLo and mergeHi methods nudge it higher for |
| * random data, and lower for highly structured data. |
| */ |
| private int minGallop = MIN_GALLOP; |
| |
| /** |
| * Maximum initial size of tmp array, which is used for merging. The array |
| * can grow to accommodate demand. |
| * |
| * Unlike Tim's original C version, we do not allocate this much storage |
| * when sorting smaller arrays. This change was required for performance. |
| */ |
| private static final int INITIAL_TMP_STORAGE_LENGTH = 256; |
| |
| /** |
| * Temp storage for merges. |
| */ |
| private Object[] tmp; |
| |
| /** |
| * A stack of pending runs yet to be merged. Run i starts at |
| * address base[i] and extends for len[i] elements. It's always |
| * true (so long as the indices are in bounds) that: |
| * |
| * runBase[i] + runLen[i] == runBase[i + 1] |
| * |
| * so we could cut the storage for this, but it's a minor amount, |
| * and keeping all the info explicit simplifies the code. |
| */ |
| private int stackSize = 0; // Number of pending runs on stack |
| private final int[] runBase; |
| private final int[] runLen; |
| |
| /** |
| * Asserts have been placed in if-statements for performace. To enable them, |
| * set this field to true and enable them in VM with a command line flag. |
| * If you modify this class, please do test the asserts! |
| */ |
| private static final boolean DEBUG = false; |
| |
| /** |
| * Creates a TimSort instance to maintain the state of an ongoing sort. |
| * |
| * @param a the array to be sorted |
| */ |
| private ComparableTimSort(Object[] a) { |
| this.a = a; |
| |
| // Allocate temp storage (which may be increased later if necessary) |
| int len = a.length; |
| @SuppressWarnings({"unchecked", "UnnecessaryLocalVariable"}) |
| Object[] newArray = new Object[len < 2 * INITIAL_TMP_STORAGE_LENGTH ? |
| len >>> 1 : INITIAL_TMP_STORAGE_LENGTH]; |
| tmp = newArray; |
| |
| /* |
| * Allocate runs-to-be-merged stack (which cannot be expanded). The |
| * stack length requirements are described in listsort.txt. The C |
| * version always uses the same stack length (85), but this was |
| * measured to be too expensive when sorting "mid-sized" arrays (e.g., |
| * 100 elements) in Java. Therefore, we use smaller (but sufficiently |
| * large) stack lengths for smaller arrays. The "magic numbers" in the |
| * computation below must be changed if MIN_MERGE is decreased. See |
| * the MIN_MERGE declaration above for more information. |
| */ |
| int stackLen = (len < 120 ? 5 : |
| len < 1542 ? 10 : |
| len < 119151 ? 19 : 40); |
| runBase = new int[stackLen]; |
| runLen = new int[stackLen]; |
| } |
| |
| /* |
| * The next two methods (which are package private and static) constitute |
| * the entire API of this class. Each of these methods obeys the contract |
| * of the public method with the same signature in java.util.Arrays. |
| */ |
| |
| static void sort(Object[] a) { |
| sort(a, 0, a.length); |
| } |
| |
| static void sort(Object[] a, int lo, int hi) { |
| rangeCheck(a.length, lo, hi); |
| int nRemaining = hi - lo; |
| if (nRemaining < 2) |
| return; // Arrays of size 0 and 1 are always sorted |
| |
| // If array is small, do a "mini-TimSort" with no merges |
| if (nRemaining < MIN_MERGE) { |
| int initRunLen = countRunAndMakeAscending(a, lo, nRemaining); |
| binarySort(a, lo, hi, lo + initRunLen); |
| return; |
| } |
| |
| /** |
| * March over the array once, left to right, finding natural runs, |
| * extending short natural runs to minRun elements, and merging runs |
| * to maintain stack invariant. |
| */ |
| ComparableTimSort ts = new ComparableTimSort(a); |
| int minRun = minRunLength(nRemaining); |
| do { |
| // Identify next run |
| int runLen = countRunAndMakeAscending(a, lo, hi); |
| |
| // If run is short, extend to min(minRun, nRemaining) |
| if (runLen < minRun) { |
| int force = nRemaining <= minRun ? nRemaining : minRun; |
| binarySort(a, lo, lo + force, lo + runLen); |
| runLen = force; |
| } |
| |
| // Push run onto pending-run stack, and maybe merge |
| ts.pushRun(lo, runLen); |
| ts.mergeCollapse(); |
| |
| // Advance to find next run |
| lo += runLen; |
| nRemaining -= runLen; |
| } while (nRemaining != 0); |
| |
| // Merge all remaining runs to complete sort |
| if (DEBUG) assert lo == hi; |
| ts.mergeForceCollapse(); |
| if (DEBUG) assert ts.stackSize == 1; |
| } |
| |
| /** |
| * Sorts the specified portion of the specified array using a binary |
| * insertion sort. This is the best method for sorting small numbers |
| * of elements. It requires O(n log n) compares, but O(n^2) data |
| * movement (worst case). |
| * |
| * If the initial part of the specified range is already sorted, |
| * this method can take advantage of it: the method assumes that the |
| * elements from index {@code lo}, inclusive, to {@code start}, |
| * exclusive are already sorted. |
| * |
| * @param a the array in which a range is to be sorted |
| * @param lo the index of the first element in the range to be sorted |
| * @param hi the index after the last element in the range to be sorted |
| * @param start the index of the first element in the range that is |
| * not already known to be sorted (@code lo <= start <= hi} |
| */ |
| @SuppressWarnings("fallthrough") |
| private static void binarySort(Object[] a, int lo, int hi, int start) { |
| if (DEBUG) assert lo <= start && start <= hi; |
| if (start == lo) |
| start++; |
| for ( ; start < hi; start++) { |
| @SuppressWarnings("unchecked") |
| Comparable<Object> pivot = (Comparable) a[start]; |
| |
| // Set left (and right) to the index where a[start] (pivot) belongs |
| int left = lo; |
| int right = start; |
| if (DEBUG) assert left <= right; |
| /* |
| * Invariants: |
| * pivot >= all in [lo, left). |
| * pivot < all in [right, start). |
| */ |
| while (left < right) { |
| int mid = (left + right) >>> 1; |
| if (pivot.compareTo(a[mid]) < 0) |
| right = mid; |
| else |
| left = mid + 1; |
| } |
| if (DEBUG) assert left == right; |
| |
| /* |
| * The invariants still hold: pivot >= all in [lo, left) and |
| * pivot < all in [left, start), so pivot belongs at left. Note |
| * that if there are elements equal to pivot, left points to the |
| * first slot after them -- that's why this sort is stable. |
| * Slide elements over to make room to make room for pivot. |
| */ |
| int n = start - left; // The number of elements to move |
| // Switch is just an optimization for arraycopy in default case |
| switch(n) { |
| case 2: a[left + 2] = a[left + 1]; |
| case 1: a[left + 1] = a[left]; |
| break; |
| default: System.arraycopy(a, left, a, left + 1, n); |
| } |
| a[left] = pivot; |
| } |
| } |
| |
| /** |
| * Returns the length of the run beginning at the specified position in |
| * the specified array and reverses the run if it is descending (ensuring |
| * that the run will always be ascending when the method returns). |
| * |
| * A run is the longest ascending sequence with: |
| * |
| * a[lo] <= a[lo + 1] <= a[lo + 2] <= ... |
| * |
| * or the longest descending sequence with: |
| * |
| * a[lo] > a[lo + 1] > a[lo + 2] > ... |
| * |
| * For its intended use in a stable mergesort, the strictness of the |
| * definition of "descending" is needed so that the call can safely |
| * reverse a descending sequence without violating stability. |
| * |
| * @param a the array in which a run is to be counted and possibly reversed |
| * @param lo index of the first element in the run |
| * @param hi index after the last element that may be contained in the run. |
| It is required that @code{lo < hi}. |
| * @return the length of the run beginning at the specified position in |
| * the specified array |
| */ |
| @SuppressWarnings("unchecked") |
| private static int countRunAndMakeAscending(Object[] a, int lo, int hi) { |
| if (DEBUG) assert lo < hi; |
| int runHi = lo + 1; |
| if (runHi == hi) |
| return 1; |
| |
| // Find end of run, and reverse range if descending |
| if (((Comparable) a[runHi++]).compareTo(a[lo]) < 0) { // Descending |
| while(runHi < hi && ((Comparable) a[runHi]).compareTo(a[runHi - 1]) < 0) |
| runHi++; |
| reverseRange(a, lo, runHi); |
| } else { // Ascending |
| while (runHi < hi && ((Comparable) a[runHi]).compareTo(a[runHi - 1]) >= 0) |
| runHi++; |
| } |
| |
| return runHi - lo; |
| } |
| |
| /** |
| * Reverse the specified range of the specified array. |
| * |
| * @param a the array in which a range is to be reversed |
| * @param lo the index of the first element in the range to be reversed |
| * @param hi the index after the last element in the range to be reversed |
| */ |
| private static void reverseRange(Object[] a, int lo, int hi) { |
| hi--; |
| while (lo < hi) { |
| Object t = a[lo]; |
| a[lo++] = a[hi]; |
| a[hi--] = t; |
| } |
| } |
| |
| /** |
| * Returns the minimum acceptable run length for an array of the specified |
| * length. Natural runs shorter than this will be extended with |
| * {@link #binarySort}. |
| * |
| * Roughly speaking, the computation is: |
| * |
| * If n < MIN_MERGE, return n (it's too small to bother with fancy stuff). |
| * Else if n is an exact power of 2, return MIN_MERGE/2. |
| * Else return an int k, MIN_MERGE/2 <= k <= MIN_MERGE, such that n/k |
| * is close to, but strictly less than, an exact power of 2. |
| * |
| * For the rationale, see listsort.txt. |
| * |
| * @param n the length of the array to be sorted |
| * @return the length of the minimum run to be merged |
| */ |
| private static int minRunLength(int n) { |
| if (DEBUG) assert n >= 0; |
| int r = 0; // Becomes 1 if any 1 bits are shifted off |
| while (n >= MIN_MERGE) { |
| r |= (n & 1); |
| n >>= 1; |
| } |
| return n + r; |
| } |
| |
| /** |
| * Pushes the specified run onto the pending-run stack. |
| * |
| * @param runBase index of the first element in the run |
| * @param runLen the number of elements in the run |
| */ |
| private void pushRun(int runBase, int runLen) { |
| this.runBase[stackSize] = runBase; |
| this.runLen[stackSize] = runLen; |
| stackSize++; |
| } |
| |
| /** |
| * Examines the stack of runs waiting to be merged and merges adjacent runs |
| * until the stack invariants are reestablished: |
| * |
| * 1. runLen[i - 3] > runLen[i - 2] + runLen[i - 1] |
| * 2. runLen[i - 2] > runLen[i - 1] |
| * |
| * This method is called each time a new run is pushed onto the stack, |
| * so the invariants are guaranteed to hold for i < stackSize upon |
| * entry to the method. |
| */ |
| private void mergeCollapse() { |
| while (stackSize > 1) { |
| int n = stackSize - 2; |
| if (n > 0 && runLen[n-1] <= runLen[n] + runLen[n+1]) { |
| if (runLen[n - 1] < runLen[n + 1]) |
| n--; |
| mergeAt(n); |
| } else if (runLen[n] <= runLen[n + 1]) { |
| mergeAt(n); |
| } else { |
| break; // Invariant is established |
| } |
| } |
| } |
| |
| /** |
| * Merges all runs on the stack until only one remains. This method is |
| * called once, to complete the sort. |
| */ |
| private void mergeForceCollapse() { |
| while (stackSize > 1) { |
| int n = stackSize - 2; |
| if (n > 0 && runLen[n - 1] < runLen[n + 1]) |
| n--; |
| mergeAt(n); |
| } |
| } |
| |
| /** |
| * Merges the two runs at stack indices i and i+1. Run i must be |
| * the penultimate or antepenultimate run on the stack. In other words, |
| * i must be equal to stackSize-2 or stackSize-3. |
| * |
| * @param i stack index of the first of the two runs to merge |
| */ |
| @SuppressWarnings("unchecked") |
| private void mergeAt(int i) { |
| if (DEBUG) assert stackSize >= 2; |
| if (DEBUG) assert i >= 0; |
| if (DEBUG) assert i == stackSize - 2 || i == stackSize - 3; |
| |
| int base1 = runBase[i]; |
| int len1 = runLen[i]; |
| int base2 = runBase[i + 1]; |
| int len2 = runLen[i + 1]; |
| if (DEBUG) assert len1 > 0 && len2 > 0; |
| if (DEBUG) assert base1 + len1 == base2; |
| |
| /* |
| * Record the length of the combined runs; if i is the 3rd-last |
| * run now, also slide over the last run (which isn't involved |
| * in this merge). The current run (i+1) goes away in any case. |
| */ |
| runLen[i] = len1 + len2; |
| if (i == stackSize - 3) { |
| runBase[i + 1] = runBase[i + 2]; |
| runLen[i + 1] = runLen[i + 2]; |
| } |
| stackSize--; |
| |
| /* |
| * Find where the first element of run2 goes in run1. Prior elements |
| * in run1 can be ignored (because they're already in place). |
| */ |
| int k = gallopRight((Comparable<Object>) a[base2], a, base1, len1, 0); |
| if (DEBUG) assert k >= 0; |
| base1 += k; |
| len1 -= k; |
| if (len1 == 0) |
| return; |
| |
| /* |
| * Find where the last element of run1 goes in run2. Subsequent elements |
| * in run2 can be ignored (because they're already in place). |
| */ |
| len2 = gallopLeft((Comparable<Object>) a[base1 + len1 - 1], a, |
| base2, len2, len2 - 1); |
| if (DEBUG) assert len2 >= 0; |
| if (len2 == 0) |
| return; |
| |
| // Merge remaining runs, using tmp array with min(len1, len2) elements |
| if (len1 <= len2) |
| mergeLo(base1, len1, base2, len2); |
| else |
| mergeHi(base1, len1, base2, len2); |
| } |
| |
| /** |
| * Locates the position at which to insert the specified key into the |
| * specified sorted range; if the range contains an element equal to key, |
| * returns the index of the leftmost equal element. |
| * |
| * @param key the key whose insertion point to search for |
| * @param a the array in which to search |
| * @param base the index of the first element in the range |
| * @param len the length of the range; must be > 0 |
| * @param hint the index at which to begin the search, 0 <= hint < n. |
| * The closer hint is to the result, the faster this method will run. |
| * @return the int k, 0 <= k <= n such that a[b + k - 1] < key <= a[b + k], |
| * pretending that a[b - 1] is minus infinity and a[b + n] is infinity. |
| * In other words, key belongs at index b + k; or in other words, |
| * the first k elements of a should precede key, and the last n - k |
| * should follow it. |
| */ |
| private static int gallopLeft(Comparable<Object> key, Object[] a, |
| int base, int len, int hint) { |
| if (DEBUG) assert len > 0 && hint >= 0 && hint < len; |
| |
| int lastOfs = 0; |
| int ofs = 1; |
| if (key.compareTo(a[base + hint]) > 0) { |
| // Gallop right until a[base+hint+lastOfs] < key <= a[base+hint+ofs] |
| int maxOfs = len - hint; |
| while (ofs < maxOfs && key.compareTo(a[base + hint + ofs]) > 0) { |
| lastOfs = ofs; |
| ofs = (ofs << 1) + 1; |
| if (ofs <= 0) // int overflow |
| ofs = maxOfs; |
| } |
| if (ofs > maxOfs) |
| ofs = maxOfs; |
| |
| // Make offsets relative to base |
| lastOfs += hint; |
| ofs += hint; |
| } else { // key <= a[base + hint] |
| // Gallop left until a[base+hint-ofs] < key <= a[base+hint-lastOfs] |
| final int maxOfs = hint + 1; |
| while (ofs < maxOfs && key.compareTo(a[base + hint - ofs]) <= 0) { |
| lastOfs = ofs; |
| ofs = (ofs << 1) + 1; |
| if (ofs <= 0) // int overflow |
| ofs = maxOfs; |
| } |
| if (ofs > maxOfs) |
| ofs = maxOfs; |
| |
| // Make offsets relative to base |
| int tmp = lastOfs; |
| lastOfs = hint - ofs; |
| ofs = hint - tmp; |
| } |
| if (DEBUG) assert -1 <= lastOfs && lastOfs < ofs && ofs <= len; |
| |
| /* |
| * Now a[base+lastOfs] < key <= a[base+ofs], so key belongs somewhere |
| * to the right of lastOfs but no farther right than ofs. Do a binary |
| * search, with invariant a[base + lastOfs - 1] < key <= a[base + ofs]. |
| */ |
| lastOfs++; |
| while (lastOfs < ofs) { |
| int m = lastOfs + ((ofs - lastOfs) >>> 1); |
| |
| if (key.compareTo(a[base + m]) > 0) |
| lastOfs = m + 1; // a[base + m] < key |
| else |
| ofs = m; // key <= a[base + m] |
| } |
| if (DEBUG) assert lastOfs == ofs; // so a[base + ofs - 1] < key <= a[base + ofs] |
| return ofs; |
| } |
| |
| /** |
| * Like gallopLeft, except that if the range contains an element equal to |
| * key, gallopRight returns the index after the rightmost equal element. |
| * |
| * @param key the key whose insertion point to search for |
| * @param a the array in which to search |
| * @param base the index of the first element in the range |
| * @param len the length of the range; must be > 0 |
| * @param hint the index at which to begin the search, 0 <= hint < n. |
| * The closer hint is to the result, the faster this method will run. |
| * @return the int k, 0 <= k <= n such that a[b + k - 1] <= key < a[b + k] |
| */ |
| private static int gallopRight(Comparable<Object> key, Object[] a, |
| int base, int len, int hint) { |
| if (DEBUG) assert len > 0 && hint >= 0 && hint < len; |
| |
| int ofs = 1; |
| int lastOfs = 0; |
| if (key.compareTo(a[base + hint]) < 0) { |
| // Gallop left until a[b+hint - ofs] <= key < a[b+hint - lastOfs] |
| int maxOfs = hint + 1; |
| while (ofs < maxOfs && key.compareTo(a[base + hint - ofs]) < 0) { |
| lastOfs = ofs; |
| ofs = (ofs << 1) + 1; |
| if (ofs <= 0) // int overflow |
| ofs = maxOfs; |
| } |
| if (ofs > maxOfs) |
| ofs = maxOfs; |
| |
| // Make offsets relative to b |
| int tmp = lastOfs; |
| lastOfs = hint - ofs; |
| ofs = hint - tmp; |
| } else { // a[b + hint] <= key |
| // Gallop right until a[b+hint + lastOfs] <= key < a[b+hint + ofs] |
| int maxOfs = len - hint; |
| while (ofs < maxOfs && key.compareTo(a[base + hint + ofs]) >= 0) { |
| lastOfs = ofs; |
| ofs = (ofs << 1) + 1; |
| if (ofs <= 0) // int overflow |
| ofs = maxOfs; |
| } |
| if (ofs > maxOfs) |
| ofs = maxOfs; |
| |
| // Make offsets relative to b |
| lastOfs += hint; |
| ofs += hint; |
| } |
| if (DEBUG) assert -1 <= lastOfs && lastOfs < ofs && ofs <= len; |
| |
| /* |
| * Now a[b + lastOfs] <= key < a[b + ofs], so key belongs somewhere to |
| * the right of lastOfs but no farther right than ofs. Do a binary |
| * search, with invariant a[b + lastOfs - 1] <= key < a[b + ofs]. |
| */ |
| lastOfs++; |
| while (lastOfs < ofs) { |
| int m = lastOfs + ((ofs - lastOfs) >>> 1); |
| |
| if (key.compareTo(a[base + m]) < 0) |
| ofs = m; // key < a[b + m] |
| else |
| lastOfs = m + 1; // a[b + m] <= key |
| } |
| if (DEBUG) assert lastOfs == ofs; // so a[b + ofs - 1] <= key < a[b + ofs] |
| return ofs; |
| } |
| |
| /** |
| * Merges two adjacent runs in place, in a stable fashion. The first |
| * element of the first run must be greater than the first element of the |
| * second run (a[base1] > a[base2]), and the last element of the first run |
| * (a[base1 + len1-1]) must be greater than all elements of the second run. |
| * |
| * For performance, this method should be called only when len1 <= len2; |
| * its twin, mergeHi should be called if len1 >= len2. (Either method |
| * may be called if len1 == len2.) |
| * |
| * @param base1 index of first element in first run to be merged |
| * @param len1 length of first run to be merged (must be > 0) |
| * @param base2 index of first element in second run to be merged |
| * (must be aBase + aLen) |
| * @param len2 length of second run to be merged (must be > 0) |
| */ |
| @SuppressWarnings("unchecked") |
| private void mergeLo(int base1, int len1, int base2, int len2) { |
| if (DEBUG) assert len1 > 0 && len2 > 0 && base1 + len1 == base2; |
| |
| // Copy first run into temp array |
| Object[] a = this.a; // For performance |
| Object[] tmp = ensureCapacity(len1); |
| System.arraycopy(a, base1, tmp, 0, len1); |
| |
| int cursor1 = 0; // Indexes into tmp array |
| int cursor2 = base2; // Indexes int a |
| int dest = base1; // Indexes int a |
| |
| // Move first element of second run and deal with degenerate cases |
| a[dest++] = a[cursor2++]; |
| if (--len2 == 0) { |
| System.arraycopy(tmp, cursor1, a, dest, len1); |
| return; |
| } |
| if (len1 == 1) { |
| System.arraycopy(a, cursor2, a, dest, len2); |
| a[dest + len2] = tmp[cursor1]; // Last elt of run 1 to end of merge |
| return; |
| } |
| |
| int minGallop = this.minGallop; // Use local variable for performance |
| outer: |
| while (true) { |
| int count1 = 0; // Number of times in a row that first run won |
| int count2 = 0; // Number of times in a row that second run won |
| |
| /* |
| * Do the straightforward thing until (if ever) one run starts |
| * winning consistently. |
| */ |
| do { |
| if (DEBUG) assert len1 > 1 && len2 > 0; |
| if (((Comparable) a[cursor2]).compareTo(tmp[cursor1]) < 0) { |
| a[dest++] = a[cursor2++]; |
| count2++; |
| count1 = 0; |
| if (--len2 == 0) |
| break outer; |
| } else { |
| a[dest++] = tmp[cursor1++]; |
| count1++; |
| count2 = 0; |
| if (--len1 == 1) |
| break outer; |
| } |
| } while ((count1 | count2) < minGallop); |
| |
| /* |
| * One run is winning so consistently that galloping may be a |
| * huge win. So try that, and continue galloping until (if ever) |
| * neither run appears to be winning consistently anymore. |
| */ |
| do { |
| if (DEBUG) assert len1 > 1 && len2 > 0; |
| count1 = gallopRight((Comparable) a[cursor2], tmp, cursor1, len1, 0); |
| if (count1 != 0) { |
| System.arraycopy(tmp, cursor1, a, dest, count1); |
| dest += count1; |
| cursor1 += count1; |
| len1 -= count1; |
| if (len1 <= 1) // len1 == 1 || len1 == 0 |
| break outer; |
| } |
| a[dest++] = a[cursor2++]; |
| if (--len2 == 0) |
| break outer; |
| |
| count2 = gallopLeft((Comparable) tmp[cursor1], a, cursor2, len2, 0); |
| if (count2 != 0) { |
| System.arraycopy(a, cursor2, a, dest, count2); |
| dest += count2; |
| cursor2 += count2; |
| len2 -= count2; |
| if (len2 == 0) |
| break outer; |
| } |
| a[dest++] = tmp[cursor1++]; |
| if (--len1 == 1) |
| break outer; |
| minGallop--; |
| } while (count1 >= MIN_GALLOP | count2 >= MIN_GALLOP); |
| if (minGallop < 0) |
| minGallop = 0; |
| minGallop += 2; // Penalize for leaving gallop mode |
| } // End of "outer" loop |
| this.minGallop = minGallop < 1 ? 1 : minGallop; // Write back to field |
| |
| if (len1 == 1) { |
| if (DEBUG) assert len2 > 0; |
| System.arraycopy(a, cursor2, a, dest, len2); |
| a[dest + len2] = tmp[cursor1]; // Last elt of run 1 to end of merge |
| } else if (len1 == 0) { |
| throw new IllegalArgumentException( |
| "Comparison method violates its general contract!"); |
| } else { |
| if (DEBUG) assert len2 == 0; |
| if (DEBUG) assert len1 > 1; |
| System.arraycopy(tmp, cursor1, a, dest, len1); |
| } |
| } |
| |
| /** |
| * Like mergeLo, except that this method should be called only if |
| * len1 >= len2; mergeLo should be called if len1 <= len2. (Either method |
| * may be called if len1 == len2.) |
| * |
| * @param base1 index of first element in first run to be merged |
| * @param len1 length of first run to be merged (must be > 0) |
| * @param base2 index of first element in second run to be merged |
| * (must be aBase + aLen) |
| * @param len2 length of second run to be merged (must be > 0) |
| */ |
| @SuppressWarnings("unchecked") |
| private void mergeHi(int base1, int len1, int base2, int len2) { |
| if (DEBUG) assert len1 > 0 && len2 > 0 && base1 + len1 == base2; |
| |
| // Copy second run into temp array |
| Object[] a = this.a; // For performance |
| Object[] tmp = ensureCapacity(len2); |
| System.arraycopy(a, base2, tmp, 0, len2); |
| |
| int cursor1 = base1 + len1 - 1; // Indexes into a |
| int cursor2 = len2 - 1; // Indexes into tmp array |
| int dest = base2 + len2 - 1; // Indexes into a |
| |
| // Move last element of first run and deal with degenerate cases |
| a[dest--] = a[cursor1--]; |
| if (--len1 == 0) { |
| System.arraycopy(tmp, 0, a, dest - (len2 - 1), len2); |
| return; |
| } |
| if (len2 == 1) { |
| dest -= len1; |
| cursor1 -= len1; |
| System.arraycopy(a, cursor1 + 1, a, dest + 1, len1); |
| a[dest] = tmp[cursor2]; |
| return; |
| } |
| |
| int minGallop = this.minGallop; // Use local variable for performance |
| outer: |
| while (true) { |
| int count1 = 0; // Number of times in a row that first run won |
| int count2 = 0; // Number of times in a row that second run won |
| |
| /* |
| * Do the straightforward thing until (if ever) one run |
| * appears to win consistently. |
| */ |
| do { |
| if (DEBUG) assert len1 > 0 && len2 > 1; |
| if (((Comparable) tmp[cursor2]).compareTo(a[cursor1]) < 0) { |
| a[dest--] = a[cursor1--]; |
| count1++; |
| count2 = 0; |
| if (--len1 == 0) |
| break outer; |
| } else { |
| a[dest--] = tmp[cursor2--]; |
| count2++; |
| count1 = 0; |
| if (--len2 == 1) |
| break outer; |
| } |
| } while ((count1 | count2) < minGallop); |
| |
| /* |
| * One run is winning so consistently that galloping may be a |
| * huge win. So try that, and continue galloping until (if ever) |
| * neither run appears to be winning consistently anymore. |
| */ |
| do { |
| if (DEBUG) assert len1 > 0 && len2 > 1; |
| count1 = len1 - gallopRight((Comparable) tmp[cursor2], a, base1, len1, len1 - 1); |
| if (count1 != 0) { |
| dest -= count1; |
| cursor1 -= count1; |
| len1 -= count1; |
| System.arraycopy(a, cursor1 + 1, a, dest + 1, count1); |
| if (len1 == 0) |
| break outer; |
| } |
| a[dest--] = tmp[cursor2--]; |
| if (--len2 == 1) |
| break outer; |
| |
| count2 = len2 - gallopLeft((Comparable) a[cursor1], tmp, 0, len2, len2 - 1); |
| if (count2 != 0) { |
| dest -= count2; |
| cursor2 -= count2; |
| len2 -= count2; |
| System.arraycopy(tmp, cursor2 + 1, a, dest + 1, count2); |
| if (len2 <= 1) |
| break outer; // len2 == 1 || len2 == 0 |
| } |
| a[dest--] = a[cursor1--]; |
| if (--len1 == 0) |
| break outer; |
| minGallop--; |
| } while (count1 >= MIN_GALLOP | count2 >= MIN_GALLOP); |
| if (minGallop < 0) |
| minGallop = 0; |
| minGallop += 2; // Penalize for leaving gallop mode |
| } // End of "outer" loop |
| this.minGallop = minGallop < 1 ? 1 : minGallop; // Write back to field |
| |
| if (len2 == 1) { |
| if (DEBUG) assert len1 > 0; |
| dest -= len1; |
| cursor1 -= len1; |
| System.arraycopy(a, cursor1 + 1, a, dest + 1, len1); |
| a[dest] = tmp[cursor2]; // Move first elt of run2 to front of merge |
| } else if (len2 == 0) { |
| throw new IllegalArgumentException( |
| "Comparison method violates its general contract!"); |
| } else { |
| if (DEBUG) assert len1 == 0; |
| if (DEBUG) assert len2 > 0; |
| System.arraycopy(tmp, 0, a, dest - (len2 - 1), len2); |
| } |
| } |
| |
| /** |
| * Ensures that the external array tmp has at least the specified |
| * number of elements, increasing its size if necessary. The size |
| * increases exponentially to ensure amortized linear time complexity. |
| * |
| * @param minCapacity the minimum required capacity of the tmp array |
| * @return tmp, whether or not it grew |
| */ |
| private Object[] ensureCapacity(int minCapacity) { |
| if (tmp.length < minCapacity) { |
| // Compute smallest power of 2 > minCapacity |
| int newSize = minCapacity; |
| newSize |= newSize >> 1; |
| newSize |= newSize >> 2; |
| newSize |= newSize >> 4; |
| newSize |= newSize >> 8; |
| newSize |= newSize >> 16; |
| newSize++; |
| |
| if (newSize < 0) // Not bloody likely! |
| newSize = minCapacity; |
| else |
| newSize = Math.min(newSize, a.length >>> 1); |
| |
| @SuppressWarnings({"unchecked", "UnnecessaryLocalVariable"}) |
| Object[] newArray = new Object[newSize]; |
| tmp = newArray; |
| } |
| return tmp; |
| } |
| |
| /** |
| * Checks that fromIndex and toIndex are in range, and throws an |
| * appropriate exception if they aren't. |
| * |
| * @param arrayLen the length of the array |
| * @param fromIndex the index of the first element of the range |
| * @param toIndex the index after the last element of the range |
| * @throws IllegalArgumentException if fromIndex > toIndex |
| * @throws ArrayIndexOutOfBoundsException if fromIndex < 0 |
| * or toIndex > arrayLen |
| */ |
| private static void rangeCheck(int arrayLen, int fromIndex, int toIndex) { |
| if (fromIndex > toIndex) |
| throw new IllegalArgumentException("fromIndex(" + fromIndex + |
| ") > toIndex(" + toIndex+")"); |
| if (fromIndex < 0) |
| throw new ArrayIndexOutOfBoundsException(fromIndex); |
| if (toIndex > arrayLen) |
| throw new ArrayIndexOutOfBoundsException(toIndex); |
| } |
| } |
