blob: fb6df2716595ddb3beb19f1aeacdeeba24bbf610 [file] [log] [blame]
/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Common subroutines and data.
*/
#if defined(WITH_JIT)
/*
* Placeholder entries for x86 JIT
*/
.global dvmJitToInterpPunt
dvmJitToInterpPunt:
.global dvmJitToInterpSingleStep
dvmJitToInterpSingleStep:
.global dvmJitToInterpNoChainNoProfile
dvmJitToInterpNoChainNoProfile:
.global dvmJitToInterpTraceSelectNoChain
dvmJitToInterpTraceSelectNoChain:
.global dvmJitToInterpTraceSelect
dvmJitToInterpTraceSelect:
.global dvmJitToInterpBackwardBranch
dvmJitToInterpBackwardBranch:
.global dvmJitToInterpNormal
dvmJitToInterpNormal:
.global dvmJitToInterpNoChain
dvmJitToInterpNoChain:
jmp common_abort
#endif
/*
* Common code when a backwards branch is taken
*
* On entry:
* ebx (a.k.a. rINST) -> PC adjustment in 16-bit words
*/
common_backwardBranch:
movl rGLUE,%ecx
call common_periodicChecks # Note: expects rPC to be preserved
ADVANCE_PC_INDEXED rINST
FETCH_INST
GOTO_NEXT
/*
* Common code for method invocation with range.
*
* On entry:
* eax = Method* methodToCall
* rINSTw trashed, must reload
*/
common_invokeMethodRange:
.LinvokeNewRange:
/*
* prepare to copy args to "outs" area of current frame
*/
movzbl 1(rPC),rINST # rINST<- AA
movzwl 4(rPC), %ecx # %ecx<- CCCC
SAVEAREA_FROM_FP %edx # %edx<- &StackSaveArea
test rINST, rINST
movl rINST, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET(%ebp)<- AA
jz .LinvokeArgsDone # no args; jump to args done
/*
* %eax=methodToCall, %ecx=CCCC, LOCAL0_OFFSET(%ebp)=count, %edx=&outs (&stackSaveArea)
* (very few methods have > 10 args; could unroll for common cases)
*/
movl %ebx, LOCAL1_OFFSET(%ebp) # LOCAL1_OFFSET(%ebp)<- save %ebx
lea (rFP, %ecx, 4), %ecx # %ecx<- &vCCCC
shll $$2, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET(%ebp)<- offset
subl LOCAL0_OFFSET(%ebp), %edx # %edx<- update &outs
shrl $$2, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET(%ebp)<- offset
1:
movl (%ecx), %ebx # %ebx<- vCCCC
lea 4(%ecx), %ecx # %ecx<- &vCCCC++
subl $$1, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET<- LOCAL0_OFFSET--
movl %ebx, (%edx) # *outs<- vCCCC
lea 4(%edx), %edx # outs++
jne 1b # loop if count (LOCAL0_OFFSET(%ebp)) not zero
movl LOCAL1_OFFSET(%ebp), %ebx # %ebx<- restore %ebx
jmp .LinvokeArgsDone # continue
/*
* %eax is "Method* methodToCall", the method we're trying to call
* prepare to copy args to "outs" area of current frame
*/
common_invokeMethodNoRange:
.LinvokeNewNoRange:
movzbl 1(rPC),rINST # rINST<- BA
movl rINST, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET(%ebp)<- BA
shrl $$4, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET(%ebp)<- B
je .LinvokeArgsDone # no args; jump to args done
movzwl 4(rPC), %ecx # %ecx<- GFED
SAVEAREA_FROM_FP %edx # %edx<- &StackSaveArea
/*
* %eax=methodToCall, %ecx=GFED, LOCAL0_OFFSET(%ebp)=count, %edx=outs
*/
.LinvokeNonRange:
cmp $$2, LOCAL0_OFFSET(%ebp) # compare LOCAL0_OFFSET(%ebp) to 2
movl %ecx, LOCAL1_OFFSET(%ebp) # LOCAL1_OFFSET(%ebp)<- GFED
jl 1f # handle 1 arg
je 2f # handle 2 args
cmp $$4, LOCAL0_OFFSET(%ebp) # compare LOCAL0_OFFSET(%ebp) to 4
jl 3f # handle 3 args
je 4f # handle 4 args
5:
andl $$15, rINST # rINSTw<- A
lea -4(%edx), %edx # %edx<- update &outs; &outs--
movl (rFP, rINST, 4), %ecx # %ecx<- vA
movl %ecx, (%edx) # *outs<- vA
movl LOCAL1_OFFSET(%ebp), %ecx # %ecx<- GFED
4:
shr $$12, %ecx # %ecx<- G
lea -4(%edx), %edx # %edx<- update &outs; &outs--
movl (rFP, %ecx, 4), %ecx # %ecx<- vG
movl %ecx, (%edx) # *outs<- vG
movl LOCAL1_OFFSET(%ebp), %ecx # %ecx<- GFED
3:
and $$0x0f00, %ecx # %ecx<- 0F00
shr $$8, %ecx # %ecx<- F
lea -4(%edx), %edx # %edx<- update &outs; &outs--
movl (rFP, %ecx, 4), %ecx # %ecx<- vF
movl %ecx, (%edx) # *outs<- vF
movl LOCAL1_OFFSET(%ebp), %ecx # %ecx<- GFED
2:
and $$0x00f0, %ecx # %ecx<- 00E0
shr $$4, %ecx # %ecx<- E
lea -4(%edx), %edx # %edx<- update &outs; &outs--
movl (rFP, %ecx, 4), %ecx # %ecx<- vE
movl %ecx, (%edx) # *outs<- vE
movl LOCAL1_OFFSET(%ebp), %ecx # %ecx<- GFED
1:
and $$0x000f, %ecx # %ecx<- 000D
movl (rFP, %ecx, 4), %ecx # %ecx<- vD
movl %ecx, -4(%edx) # *--outs<- vD
0:
/*
* %eax is "Method* methodToCall", the method we're trying to call
* find space for the new stack frame, check for overflow
*/
.LinvokeArgsDone:
movzwl offMethod_registersSize(%eax), %edx # %edx<- methodToCall->regsSize
movzwl offMethod_outsSize(%eax), %ecx # %ecx<- methodToCall->outsSize
movl %eax, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET<- methodToCall
shl $$2, %edx # %edx<- update offset
SAVEAREA_FROM_FP %eax # %eax<- &StackSaveArea
subl %edx, %eax # %eax<- newFP; (old savearea - regsSize)
movl rGLUE,%edx # %edx<- pMterpGlue
movl %eax, LOCAL1_OFFSET(%ebp) # LOCAL1_OFFSET(%ebp)<- &outs
subl $$sizeofStackSaveArea, %eax # %eax<- newSaveArea (stack save area using newFP)
movl offGlue_interpStackEnd(%edx), %edx # %edx<- glue->interpStackEnd
movl %edx, LOCAL2_OFFSET(%ebp) # LOCAL2_OFFSET<- glue->interpStackEnd
shl $$2, %ecx # %ecx<- update offset for outsSize
movl %eax, %edx # %edx<- newSaveArea
sub %ecx, %eax # %eax<- bottom; (newSaveArea - outsSize)
cmp LOCAL2_OFFSET(%ebp), %eax # compare interpStackEnd and bottom
movl LOCAL0_OFFSET(%ebp), %eax # %eax<- restore methodToCall
jl .LstackOverflow # handle frame overflow
/*
* set up newSaveArea
*/
#ifdef EASY_GDB
SAVEAREA_FROM_FP %ecx # %ecx<- &StackSaveArea
movl %ecx, offStackSaveArea_prevSave(%edx) # newSaveArea->prevSave<- &outs
#endif
movl rFP, offStackSaveArea_prevFrame(%edx) # newSaveArea->prevFrame<- rFP
movl rPC, offStackSaveArea_savedPc(%edx) # newSaveArea->savedPc<- rPC
testl $$ACC_NATIVE, offMethod_accessFlags(%eax) # check for native call
movl %eax, offStackSaveArea_method(%edx) # newSaveArea->method<- method to call
jne .LinvokeNative # handle native call
/*
* Update "glue" values for the new method
* %eax=methodToCall, LOCAL1_OFFSET(%ebp)=newFp
*/
movl offMethod_clazz(%eax), %edx # %edx<- method->clazz
movl rGLUE,%ecx # %ecx<- pMterpGlue
movl offClassObject_pDvmDex(%edx), %edx # %edx<- method->clazz->pDvmDex
movl %eax, offGlue_method(%ecx) # glue->method<- methodToCall
movl %edx, offGlue_methodClassDex(%ecx) # glue->methodClassDex<- method->clazz->pDvmDex
movl offMethod_insns(%eax), rPC # rPC<- methodToCall->insns
movl offGlue_self(%ecx), %eax # %eax<- glue->self
movl LOCAL1_OFFSET(%ebp), rFP # rFP<- newFP
movl rFP, offThread_curFrame(%eax) # glue->self->curFrame<- newFP
FETCH_INST
GOTO_NEXT # jump to methodToCall->insns
/*
* Prep for the native call
* %eax=methodToCall, LOCAL1_OFFSET(%ebp)=newFP, %edx=newSaveArea
*/
.LinvokeNative:
movl rGLUE,%ecx # %ecx<- pMterpGlue
movl %eax, OUT_ARG1(%esp) # push parameter methodToCall
movl offGlue_self(%ecx), %ecx # %ecx<- glue->self
movl offThread_jniLocal_topCookie(%ecx), %eax # %eax<- self->localRef->...
movl %eax, offStackSaveArea_localRefCookie(%edx) # newSaveArea->localRefCookie<- top
movl %edx, OUT_ARG4(%esp) # save newSaveArea
movl LOCAL1_OFFSET(%ebp), %edx # %edx<- newFP
movl %edx, offThread_curFrame(%ecx) # glue->self->curFrame<- newFP
movl %ecx, OUT_ARG3(%esp) # save glue->self
movl %ecx, OUT_ARG2(%esp) # push parameter glue->self
movl rGLUE,%ecx # %ecx<- pMterpGlue
movl OUT_ARG1(%esp), %eax # %eax<- methodToCall
lea offGlue_retval(%ecx), %ecx # %ecx<- &retval
movl %ecx, OUT_ARG0(%esp) # push parameter pMterpGlue
push %edx # push parameter newFP
call *offMethod_nativeFunc(%eax) # call methodToCall->nativeFunc
lea 4(%esp), %esp
movl OUT_ARG4(%esp), %ecx # %ecx<- newSaveArea
movl OUT_ARG3(%esp), %eax # %eax<- glue->self
movl offStackSaveArea_localRefCookie(%ecx), %edx # %edx<- old top
cmp $$0, offThread_exception(%eax) # check for exception
movl rFP, offThread_curFrame(%eax) # glue->self->curFrame<- rFP
movl %edx, offThread_jniLocal_topCookie(%eax) # new top <- old top
jne common_exceptionThrown # handle exception
FETCH_INST_OPCODE 3 %edx
ADVANCE_PC 3
GOTO_NEXT_R %edx # jump to next instruction
.LstackOverflow: # eax=methodToCall
movl %eax, OUT_ARG1(%esp) # push parameter methodToCall
movl rGLUE,%eax # %eax<- pMterpGlue
movl offGlue_self(%eax), %eax # %eax<- glue->self
movl %eax, OUT_ARG0(%esp) # push parameter self
call dvmHandleStackOverflow # call: (Thread* self, Method* meth)
jmp common_exceptionThrown # handle exception
/*
* Do we need the thread to be suspended or have debugger/profiling activity?
*
* On entry:
* ebx -> PC adjustment in 16-bit words (must be preserved)
* ecx -> GLUE pointer
* reentry type, e.g. kInterpEntryInstr stored in rGLUE->entryPoint
*
* Note: A call will normally kill %eax and %ecx. To
* streamline the normal case, this routine will preserve
* %ecx in addition to the normal caller save regs. The save/restore
* is a bit ugly, but will happen in the relatively uncommon path.
* TODO: Basic-block style Jit will need a hook here as well. Fold it into
* the suspendCount check so we can get both in 1 shot.
*/
common_periodicChecks:
movl offGlue_pSelfSuspendCount(%ecx),%eax # eax <- &suspendCount
cmpl $$0,(%eax)
jne 1f
6:
movl offGlue_pDebuggerActive(%ecx),%eax # eax <- &DebuggerActive
movl offGlue_pActiveProfilers(%ecx),%ecx # ecx <- &ActiveProfilers
testl %eax,%eax # debugger enabled?
je 2f
movzbl (%eax),%eax # get active count
2:
orl (%ecx),%eax # eax <- debuggerActive | activeProfilers
movl rGLUE,%ecx # restore rGLUE
jne 3f # one or both active - switch interp
5:
ret
/* Check for suspend */
1:
/* At this point, the return pointer to the caller of
* common_periodicChecks is on the top of stack. We need to preserve
* GLUE(ecx).
* The outgoing profile is:
* bool dvmCheckSuspendPending(Thread* self)
* Because we reached here via a call, go ahead and build a new frame.
*/
EXPORT_PC # need for precise GC
movl offGlue_self(%ecx),%eax # eax<- glue->self
push %ebp
movl %esp,%ebp
subl $$24,%esp
movl %eax,OUT_ARG0(%esp)
call dvmCheckSuspendPending
addl $$24,%esp
pop %ebp
movl rGLUE,%ecx
/*
* Need to check to see if debugger or profiler flags got set
* while we were suspended.
*/
jmp 6b
/* Switch interpreters */
/* Note: %ebx contains the 16-bit word offset to be applied to rPC to
* "complete" the interpretation of backwards branches. In effect, we
* are completing the interpretation of the branch instruction here,
* and the new interpreter will resume interpretation at the branch
* target. However, a switch request recognized during the handling
* of a return from method instruction results in an immediate abort,
* and the new interpreter will resume by re-interpreting the return
* instruction.
*/
3:
leal (rPC,%ebx,2),rPC # adjust pc to show target
movl rGLUE,%ecx # bail expect GLUE already loaded
movl $$1,rINST # set changeInterp to true
jmp common_gotoBail
/*
* Common code for handling a return instruction
*/
common_returnFromMethod:
movl rGLUE,%ecx
/* Set entry mode in case we bail */
movb $$kInterpEntryReturn,offGlue_entryPoint(%ecx)
xorl rINST,rINST # zero offset in case we switch interps
call common_periodicChecks # Note: expects %ecx to be preserved
SAVEAREA_FROM_FP %eax # eax<- saveArea (old)
movl offStackSaveArea_prevFrame(%eax),rFP # rFP<- prevFrame
movl (offStackSaveArea_method-sizeofStackSaveArea)(rFP),rINST
cmpl $$0,rINST # break?
je common_gotoBail # break frame, bail out completely
movl offStackSaveArea_savedPc(%eax),rPC # pc<- saveArea->savedPC
movl offGlue_self(%ecx),%eax # eax<- self
movl rINST,offGlue_method(%ecx) # glue->method = newSave->meethod
movl rFP,offThread_curFrame(%eax) # self->curFrame = fp
movl offMethod_clazz(rINST),%eax # eax<- method->clazz
FETCH_INST_OPCODE 3 %edx
movl offClassObject_pDvmDex(%eax),%eax # eax<- method->clazz->pDvmDex
ADVANCE_PC 3
movl %eax,offGlue_methodClassDex(%ecx)
/* not bailing - restore entry mode to default */
movb $$kInterpEntryInstr,offGlue_entryPoint(%ecx)
GOTO_NEXT_R %edx
/*
* Prepare to strip the current frame and "longjump" back to caller of
* dvmMterpStdRun.
*
* on entry:
* rINST holds changeInterp
* ecx holds glue pointer
*
* expected profile: dvmMterpStdBail(MterpGlue *glue, bool changeInterp)
*/
common_gotoBail:
movl rPC,offGlue_pc(%ecx) # export state to glue
movl rFP,offGlue_fp(%ecx)
movl %ecx,OUT_ARG0(%esp) # glue in arg0
movl rINST,OUT_ARG1(%esp) # changeInterp in arg1
call dvmMterpStdBail # bail out....
/*
* After returning from a "glued" function, pull out the updated values
* and start executing at the next instruction.
*/
common_resumeAfterGlueCall:
LOAD_PC_FP_FROM_GLUE
FETCH_INST
GOTO_NEXT
/*
* Integer divide or mod by zero
*/
common_errDivideByZero:
EXPORT_PC
movl $$.LstrArithmeticException,%eax
movl %eax,OUT_ARG0(%esp)
movl $$.LstrDivideByZero,%eax
movl %eax,OUT_ARG1(%esp)
call dvmThrowException
jmp common_exceptionThrown
/*
* Attempt to allocate an array with a negative size.
*/
common_errNegativeArraySize:
EXPORT_PC
movl $$.LstrNegativeArraySizeException,%eax
movl %eax,OUT_ARG0(%esp)
xorl %eax,%eax
movl %eax,OUT_ARG1(%esp)
call dvmThrowException
jmp common_exceptionThrown
/*
* Attempt to allocate an array with a negative size.
*/
common_errNoSuchMethod:
EXPORT_PC
movl $$.LstrNoSuchMethodError,%eax
movl %eax,OUT_ARG0(%esp)
xorl %eax,%eax
movl %eax,OUT_ARG1(%esp)
call dvmThrowException
jmp common_exceptionThrown
/*
* Hit a null object when we weren't expecting one. Export the PC, throw a
* NullPointerException and goto the exception processing code.
*/
common_errNullObject:
EXPORT_PC
movl $$.LstrNullPointerException,%eax
movl %eax,OUT_ARG0(%esp)
xorl %eax,%eax
movl %eax,OUT_ARG1(%esp)
call dvmThrowException
jmp common_exceptionThrown
/*
* Array index exceeds max.
* On entry:
* eax <- array object
* ecx <- index
*/
common_errArrayIndex:
EXPORT_PC
movl offArrayObject_length(%eax), %eax
movl %ecx,OUT_ARG0(%esp)
movl %eax,OUT_ARG1(%esp)
call dvmThrowAIOOBE # dvmThrowAIOO(index, length)
jmp common_exceptionThrown
/*
* Invalid array value.
*/
common_errArrayStore:
EXPORT_PC
movl $$.LstrArrayStoreException,%eax
movl %eax,OUT_ARG0(%esp)
xorl %eax,%eax
movl %eax,OUT_ARG1(%esp)
call dvmThrowException
jmp common_exceptionThrown
/*
* Somebody has thrown an exception. Handle it.
*
* If the exception processing code returns to us (instead of falling
* out of the interpreter), continue with whatever the next instruction
* now happens to be.
*
* This does not return.
*/
common_exceptionThrown:
movl rGLUE,%ecx
movl rPC,offGlue_pc(%ecx)
movl rFP,offGlue_fp(%ecx)
movl %ecx,OUT_ARG0(%esp)
call dvmMterp_exceptionThrown
jmp common_resumeAfterGlueCall
common_abort:
movl $$0xdeadf00d,%eax
call *%eax
/*
* Strings
*/
.section .rodata
.LstrNullPointerException:
.asciz "Ljava/lang/NullPointerException;"
.LstrArithmeticException:
.asciz "Ljava/lang/ArithmeticException;"
.LstrDivideByZero:
.asciz "divide by zero"
.LstrArrayStoreException:
.asciz "Ljava/lang/ArrayStoreException;"
.LstrNegativeArraySizeException:
.asciz "Ljava/lang/NegativeArraySizeException;"
.LstrInstantiationError:
.asciz "Ljava/lang/InstantiationError;"
.LstrClassCastException:
.asciz "Ljava/lang/ClassCastException;"
.LstrNoSuchMethodError:
.asciz "Ljava/lang/NoSuchMethodError;"
.LstrInternalErrorA:
.asciz "Ljava/lang/InternalError;"
.LstrFilledNewArrayNotImplA:
.asciz "filled-new-array only implemented for 'int'"