#!/bin/bash
#
# Copyright (C) 2007 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# Set up prog to be the path of this script, including following symlinks,
# and set up progdir to be the fully-qualified pathname of its directory.
prog="$0"
while [ -h "${prog}" ]; do
    newProg=`/bin/ls -ld "${prog}"`
    newProg=`expr "${newProg}" : ".* -> \(.*\)$"`
    if expr "x${newProg}" : 'x/' >/dev/null; then
        prog="${newProg}"
    else
        progdir=`dirname "${prog}"`
        prog="${progdir}/${newProg}"
    fi
done
oldwd=`pwd`
progdir=`dirname "${prog}"`
cd "${progdir}"
progdir=`pwd`
prog="${progdir}"/`basename "${prog}"`

export JAVA="java"
export JAVAC="javac -target 1.5"
export RUN="${progdir}/etc/push-and-run-test-jar"

info="info.txt"
build="build"
run="run"
expected="expected.txt"
output="output.txt"
build_output="build-output.txt"
run_args="--quiet"

dev_mode="no"
update_mode="no"
debug_mode="no"
usage="no"

while true; do
    if [ "x$1" = "x--local" ]; then
        RUN="${progdir}/etc/local-run-test-jar"
        shift
    elif [ "x$1" = "x--reference" ]; then
        RUN="${progdir}/etc/reference-run-test-classes"
        shift
    elif [ "x$1" = "x--fast" ]; then
        run_args="${run_args} --fast"
        shift
    elif [ "x$1" = "x--portable" ]; then
        run_args="${run_args} --portable"
        shift
    elif [ "x$1" = "x--debug" ]; then
        run_args="${run_args} --debug"
        shift
    elif [ "x$1" = "x--gdb" ]; then
        run_args="${run_args} --gdb"
        dev_mode="yes"
        shift
    elif [ "x$1" = "x--zygote" ]; then
        run_args="${run_args} --zygote"
        shift
    elif [ "x$1" = "x--no-verify" ]; then
        run_args="${run_args} --no-verify"
        shift
    elif [ "x$1" = "x--no-optimize" ]; then
        run_args="${run_args} --no-optimize"
        shift
    elif [ "x$1" = "x--no-precise" ]; then
        run_args="${run_args} --no-precise"
        shift
    elif [ "x$1" = "x--valgrind" ]; then
        run_args="${run_args} --valgrind"
        shift
    elif [ "x$1" = "x--dev" ]; then
        run_args="${run_args} --dev"
        dev_mode="yes"
        shift
    elif [ "x$1" = "x--update" ]; then
        update_mode="yes"
        shift
    elif [ "x$1" = "x--help" ]; then
        usage="yes"
        shift
    elif expr "x$1" : "x--" >/dev/null 2>&1; then
        echo "unknown option: $1" 1>&2
        usage="yes"
        break
    else
        break
    fi
done

if [ "$dev_mode" = "yes" -a "$update_mode" = "yes" ]; then
    echo "--dev and --update are mutually exclusive" 1>&2
    usage="yes"
fi

if [ "$usage" = "no" ]; then
    if [ "x$1" = "x" -o "x$1" = "x-" ]; then
        test_dir=`basename "$oldwd"`
    else
        test_dir="$1"
    fi

    if [ '!' -d "$test_dir" ]; then
        td2=`echo ${test_dir}-*`
        if [ '!' -d "$td2" ]; then
            echo "${test_dir}: no such test directory" 1>&2
            usage="yes"
        fi
        test_dir="$td2"
    fi

    # Shift to get rid of the test name argument. The rest of the arguments
    # will get passed to the test run.
    shift
fi

if [ "$usage" = "yes" ]; then
    prog=`basename $prog`
    (
        echo "usage:"
        echo "  $prog --help                          Print this message."
        echo "  $prog [options] [test-name]           Run test normally."
        echo "  $prog --dev [options] [test-name]     Development mode" \
	    "(dumps to stdout)."
        echo "  $prog --update [options] [test-name]  Update mode" \
	    "(replaces expected.txt)."
        echo '  Omitting the test name or specifying "-" will use the' \
	    "current directory."
        echo "  Runtime Options:"
        echo "    --fast         Use the fast interpreter (the default)."
        echo "    --portable     Use the portable interpreter."
        echo "    --debug        Wait for a debugger to attach."
        #echo "    --gdb          Run under gdb; incompatible with some tests."
        echo "    --no-verify    Turn off verification (on by default)."
        echo "    --no-optimize  Turn off optimization (on by default)."
        echo "    --no-precise   Turn off precise GC (on by default)."
        echo "    --zygote       Spawn the process from the Zygote." \
	    "If used, then the"
	echo "                   other runtime options are ignored."
        echo "    --local        Use a host-local virtual machine."
        echo "    --valgrind     Use valgrind when running locally."
        echo "    --reference    Use a host-local reference virtual machine."
    ) 1>&2
    exit 1
fi

cd "$test_dir"
test_dir=`pwd`

td_info="${test_dir}/${info}"
td_expected="${test_dir}/${expected}"

tmp_dir="/tmp/test-$$"

if [ '!' '(' -r "$td_info" -a -r "$td_expected" ')' ]; then
    echo "${test_dir}: missing files" 1>&2
    exit 1
fi

# copy the test to a temp dir and run it

echo "${test_dir}: running..." 1>&2

rm -rf "$tmp_dir"
cp -Rp "$test_dir" "$tmp_dir"
cd "$tmp_dir"

if [ '!' -r "$build" ]; then
    cp "${progdir}/etc/default-build" build
fi

if [ '!' -r "$run" ]; then
    cp "${progdir}/etc/default-run" run
fi

chmod 755 "$build"
chmod 755 "$run"

good="no"
if [ "$dev_mode" = "yes" ]; then
    "./${build}" 2>&1
    echo "build exit status: $?" 1>&2
    "./${run}" $run_args "$@" 2>&1
    echo "run exit status: $?" 1>&2
    good="yes"
elif [ "$update_mode" = "yes" ]; then
    "./${build}" >"$build_output" 2>&1
    build_exit="$?"
    if [ "$build_exit" = '0' ]; then
        "./${run}" $run_args "$@" >"$output" 2>&1
	sed -e 's/[[:cntrl:]]$//g' < "$output" >"${td_expected}"
        good="yes"
    else
        cat "$build_output" 1>&2
        echo "build exit status: $build_exit" 1>&2
    fi
else
    "./${build}" >"$build_output" 2>&1
    build_exit="$?"
    if [ "$build_exit" = '0' ]; then
        "./${run}" $run_args "$@" >"$output" 2>&1
    else
        cp "$build_output" "$output"
        echo "build exit status: $build_exit" >>"$output"
    fi
    diff --strip-trailing-cr -q "$expected" "$output" >/dev/null
    if [ "$?" = "0" ]; then
        # output == expected
        good="yes"
        echo "${test_dir}: succeeded!" 1>&2
    fi
fi

if [ "$good" = "yes" ]; then
    cd "$oldwd"
    rm -rf "$tmp_dir"
    exit 0
fi

(
    if [ "$update_mode" '!=' "yes" ]; then
        echo "${test_dir}: FAILED!"
        echo ' '
        echo '#################### info'
        cat "${td_info}" | sed 's/^/# /g'
        echo '#################### diffs'
        diff --strip-trailing-cr -u "$expected" "$output"
        echo '####################'
        echo ' '
    fi
    echo "files left in ${tmp_dir}"
) 1>&2

exit 1