/*
 * Copyright (C) 2013 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package com.android.cts.verifier.sensors;

import com.android.cts.verifier.R;
import com.android.cts.verifier.sensors.base.SensorCtsVerifierTestActivity;

import android.hardware.Sensor;
import android.hardware.SensorEvent;
import android.hardware.SensorEventListener2;
import android.hardware.SensorManager;
import android.hardware.cts.helpers.SensorCalibratedUncalibratedVerifier;
import android.hardware.cts.helpers.SensorCtsHelper;
import android.hardware.cts.helpers.TestSensorEnvironment;
import android.hardware.cts.helpers.TestSensorEventListener;
import android.hardware.cts.helpers.TestSensorManager;
import android.hardware.cts.helpers.sensoroperations.TestSensorOperation;
import android.hardware.cts.helpers.sensorverification.MagnitudeVerification;
import android.hardware.cts.helpers.sensorverification.StandardDeviationVerification;

/**
 * Semi-automated test that focuses characteristics associated with Accelerometer measurements.
 * These test cases require calibration of the sensor before performing the verifications.
 * Also, it is recommended to execute these tests outdoors, or at least far from magnetic
 * disturbances.
 */
public class MagneticFieldMeasurementTestActivity extends SensorCtsVerifierTestActivity {
    private static final float THRESHOLD_CALIBRATED_UNCALIBRATED_UT = 3f;

    public MagneticFieldMeasurementTestActivity() {
        super(MagneticFieldMeasurementTestActivity.class);
    }

    @Override
    public void activitySetUp() throws InterruptedException {
        calibrateMagnetometer();
    }

    /**
     * This test verifies that the Norm of the sensor data is close to the expected reference value.
     * The units of the reference value are dependent on the type of sensor.
     * This test is used to verify that the data reported by the sensor is close to the expected
     * range and scale.
     *
     * The test takes a sample from the sensor under test and calculates the Euclidean Norm of the
     * vector represented by the sampled data. It then compares it against the test expectations
     * that are represented by a reference value and a threshold.
     *
     * The test is susceptible to errors when the Sensor under test is uncalibrated, or the units in
     * which the data are reported and the expectations are set are different.
     *
     * The assertion associated with the test provides the required data needed to identify any
     * possible issue. It provides:
     * - the thread id on which the failure occurred
     * - the sensor type and sensor handle that caused the failure
     * - the values representing the expectation of the test
     * - the values sampled from the sensor
     */
    @SuppressWarnings("unused")
    public String testNorm() throws Throwable {
        getTestLogger().logMessage(R.string.snsr_mag_verify_norm);

        TestSensorEnvironment environment = new TestSensorEnvironment(
                getApplicationContext(),
                Sensor.TYPE_MAGNETIC_FIELD,
                SensorManager.SENSOR_DELAY_FASTEST);
        TestSensorOperation verifyNorm =
                new TestSensorOperation(environment, 100 /* event count */);

        float expectedMagneticFieldEarth =
                (SensorManager.MAGNETIC_FIELD_EARTH_MAX + SensorManager.MAGNETIC_FIELD_EARTH_MIN) / 2;
        float magneticFieldEarthThreshold =
                expectedMagneticFieldEarth - SensorManager.MAGNETIC_FIELD_EARTH_MIN;
        verifyNorm.addVerification(new MagnitudeVerification(
                expectedMagneticFieldEarth,
                magneticFieldEarthThreshold));
        verifyNorm.execute();
        return null;
    }

    /**
     * This test verifies that the standard deviation of a set of sampled data from a particular
     * sensor falls into the expectations defined in the CDD. The verification applies to each axis
     * of the sampled data reported by the Sensor under test.
     * This test is used to validate the requirement imposed by the CDD to Sensors in Android. And
     * characterizes how the Sensor behaves while static.
     *
     * The test takes a set of samples from the sensor under test, and calculates the Standard
     * Deviation for each of the axes the Sensor reports data for. The StdDev is compared against
     * the expected value documented in the CDD.
     *
     * The test is susceptible to errors if the device is moving while the test is running, or if
     * the Sensor's sampled data indeed falls into a large StdDev.
     *
     * The assertion associated with the test provides the required data to identify any possible
     * issue. It provides:
     * - the thread id on which the failure occurred
     * - the sensor type and sensor handle that caused the failure
     * - the expectation of the test
     * - the std dev calculated and the axis it applies to
     * Additionally, the device's debug output (adb logcat) dumps the set of values associated with
     * the failure to help track down the issue.
     */
    @SuppressWarnings("unused")
    public String testStandardDeviation() throws Throwable {
        getTestLogger().logMessage(R.string.snsr_mag_verify_std_dev);

        TestSensorEnvironment environment = new TestSensorEnvironment(
                getApplicationContext(),
                Sensor.TYPE_MAGNETIC_FIELD,
                SensorManager.SENSOR_DELAY_FASTEST);
        TestSensorOperation verifyStdDev =
                new TestSensorOperation(environment, 100 /* event count */);

        verifyStdDev.addVerification(new StandardDeviationVerification(
                new float[]{2f, 2f, 2f} /* uT */));
        verifyStdDev.execute();
        return null;
    }

    /**
     * Verifies that the relationship between readings from calibrated and their corresponding
     * uncalibrated sensors comply to the following equation:
     *      calibrated = uncalibrated - bias
     */
    @SuppressWarnings("unused")
    public String testCalibratedAndUncalibrated() throws Throwable {
        getTestLogger().logMessage(R.string.snsr_mag_verify_calibrated_uncalibrated);

        TestSensorEnvironment calibratedEnvironment = new TestSensorEnvironment(
                getApplicationContext(),
                Sensor.TYPE_MAGNETIC_FIELD,
                SensorManager.SENSOR_DELAY_FASTEST);
        TestSensorEnvironment uncalibratedEnvironment = new TestSensorEnvironment(
                getApplicationContext(),
                Sensor.TYPE_MAGNETIC_FIELD_UNCALIBRATED,
                SensorManager.SENSOR_DELAY_FASTEST);
        SensorCalibratedUncalibratedVerifier verifier = new SensorCalibratedUncalibratedVerifier(
                calibratedEnvironment,
                uncalibratedEnvironment,
                THRESHOLD_CALIBRATED_UNCALIBRATED_UT);

        try {
            verifier.execute();
        } finally {
            playSound();
        }
        return null;
    }

    /**
     * A routine to help operators calibrate the magnetometer.
     */
    private void calibrateMagnetometer() throws InterruptedException {
        SensorEventListener2 listener = new SensorEventListener2() {
            @Override
            public void onSensorChanged(SensorEvent event) {
                clearText();

                float values[] = event.values;
                SensorTestLogger logger = getTestLogger();
                logger.logInstructions(R.string.snsr_mag_calibration_description);
                logger.logMessage(
                        R.string.snsr_mag_measurement,
                        values[0],
                        values[1],
                        values[2],
                        SensorCtsHelper.getMagnitude(values));

                // TODO: automate finding out when the magnetometer is calibrated
                logger.logInstructions(R.string.snsr_mag_calibration_complete);
            }

            @Override
            public void onAccuracyChanged(Sensor sensor, int accuracy) {}

            @Override
            public void onFlushCompleted(Sensor sensor) {}
        };

        TestSensorEnvironment environment = new TestSensorEnvironment(
                getApplicationContext(),
                Sensor.TYPE_MAGNETIC_FIELD,
                SensorManager.SENSOR_DELAY_NORMAL);
        TestSensorManager magnetometer = new TestSensorManager(environment);
        try {
            magnetometer.registerListener(new TestSensorEventListener(listener));
            waitForUserToContinue();
        } finally {
            magnetometer.unregisterListener();
        }
    }
}