All devices MUST meet the requirements of section 9.9.1. Devices which launched on an API level earlier than that of this document are exempted from the requirements of sections 9.9.2 and 9.9.3; instead they MUST meet the requirements in section 9.9 of the Android Compatibility Definition document corresponding to the API level on which the device launched.
[C-0-1] MUST implement the Direct Boot mode APIs even if they do not support Storage Encryption.
[C-0-2] The [`ACTION_LOCKED_BOOT_COMPLETED`](
ACTION_USER_UNLOCKED Intents MUST still be broadcast to signal Direct Boot aware applications that Device Encrypted (DE) and Credential Encrypted (CE) storage locations are available for user.
[C-0-1] MUST encrypt the application private data (
/data partition), as well as the application shared storage partition (
/sdcard partition) if it is a permanent, non-removable part of the device.
[C-0-2] MUST enable the data storage encryption by default at the time the user has completed the out-of-box setup experience.
[C-0-3] MUST meet the above data storage encryption requirement by implementing one of the following two encryption methods:
If device implementations are encrypted, they:
ACTION_LOCKED_BOOT_COMPLETED message is broadcasted.
ACTION_USER_UNLOCKED message is broadcasted.
If device implementations use File Based Encryption with Metadata Encryption, they:
[C-1-5] MUST encrypt file contents and filesystem metadata using AES-256-XTS or Adiantum. AES-256-XTS refers to the Advanced Encryption Standard with a 256-bit cipher key length, operated in XTS mode; the full length of the key is 512 bits. Adiantum refers to Adiantum-XChaCha12-AES, as specified at https://github.com/google/adiantum. Filesystem metadata is data such as file sizes, ownership, modes, and extended attributes (xattrs).
[C-1-6] MUST encrypt file names using AES-256-CBC-CTS or Adiantum.
[C-1-12] If the device has Advanced Encryption Standard (AES) instructions (such as ARMv8 Cryptography Extensions on ARM-based devices, or AES-NI on x86-based devices) then the AES-based options above for file name, file contents, and filesystem metadata encryption MUST be used, not Adiantum.
[C-1-13] MUST use a cryptographically strong and non-reversible key derivation function (e.g. HKDF-SHA512) to derive any needed subkeys (e.g. per-file keys) from the CE and DE keys. “Cryptographically strong and non-reversible” means that the key derivation function has a security strength of at least 256 bits and behaves as a pseudorandom function family over its inputs.
[C-1-14] MUST NOT use the same File Based Encryption (FBE) keys or subkeys for different cryptographic purposes (e.g. for both encryption and key derivation, or for two different encryption algorithms).
The keys protecting CE and DE storage areas and filesystem metadata:
[C-1-7] MUST be cryptographically bound to a hardware-backed Keystore. This keystore MUST be bound to Verified Boot and the device's hardware root of trust.
[C-1-8] CE keys MUST be bound to a user's lock screen credentials.
[C-1-9] CE keys MUST be bound to a default passcode when the user has not specified lock screen credentials.
[C-1-10] MUST be unique and distinct, in other words no user‘s CE or DE key matches any other user’s CE or DE keys.
[C-1-11] MUST use the mandatorily supported ciphers, key lengths and modes.
SHOULD make preinstalled essential apps (e.g. Alarm, Phone, Messenger) Direct Boot aware.
The upstream Android Open Source project provides a preferred implementation of File Based Encryption based on the Linux kernel “fscrypt” encryption feature, and of Metadata Encryption based on the Linux kernel “dm-default-key” feature.
If device implementations use per-user block-level encryption, they:
[C-1-1] MUST enable multi-user support as described in section 9.5.
[C-1-2] MUST provide per-user partitions, either using raw partitions or logical volumes.
[C-1-3] MUST use unique and distinct encryption keys per-user for encryption of the underlying block devices.
[C-1-4] MUST use AES-256-XTS for block-level encryption of the user partitions.
The keys protecting the per-user block-level encrypted devices:
[C-1-5] MUST be cryptographically bound to a hardware-backed Keystore. This keystore MUST be bound to Verified Boot and the device's hardware root of trust.
[C-1-6] MUST be bound to the corresponding user's lock screen credentials.
Per-user block-level encryption can be implemented using the Linux kernel “dm-crypt” feature over per-user partitions.
Resume on Reboot allows unlocking the CE storage of all apps, including those that do not yet support Direct Boot, after a reboot initiated by an OTA. This feature enables users to receive notifications from installed apps after the reboot.
An implementation of Resume-on-Reboot must continue to ensure that when a device falls into an attacker’s hands, it is extremely difficult for that attacker to recover the user’s CE-encrypted data, even if the device is powered on, CE storage is unlocked, and the user has unlocked the device after receiving an OTA. For insider attack resistance, we also assume the attacker gains access to broadcast cryptographic signing keys.
[C-0-1] CE storage MUST NOT be readable even for the attacker who physically has the device and then has these capabilities and limitations:
By way of example, a device implementation that implements and complies with all of the descriptions found here will be compliant with [C-0-1].