| # Put some miscellaneous rules here |
| |
| # HACK: clear LOCAL_PATH from including last build target before calling |
| # intermedites-dir-for |
| LOCAL_PATH := $(BUILD_SYSTEM) |
| |
| # ----------------------------------------------------------------- |
| # Define rules to copy PRODUCT_COPY_FILES defined by the product. |
| # PRODUCT_COPY_FILES contains words like <source file>:<dest file>[:<owner>]. |
| # <dest file> is relative to $(PRODUCT_OUT), so it should look like, |
| # e.g., "system/etc/file.xml". |
| # The filter part means "only eval the copy-one-file rule if this |
| # src:dest pair is the first one to match the same dest" |
| #$(1): the src:dest pair |
| #$(2): the dest |
| define check-product-copy-files |
| $(if $(filter-out $(TARGET_COPY_OUT_SYSTEM_OTHER)/%,$(2)), \ |
| $(if $(filter %.apk, $(2)),$(error \ |
| Prebuilt apk found in PRODUCT_COPY_FILES: $(1), use BUILD_PREBUILT instead!))) \ |
| $(if $(filter true,$(BUILD_BROKEN_VINTF_PRODUCT_COPY_FILES)),, \ |
| $(if $(filter $(TARGET_COPY_OUT_SYSTEM)/etc/vintf/% \ |
| $(TARGET_COPY_OUT_SYSTEM)/manifest.xml \ |
| $(TARGET_COPY_OUT_SYSTEM)/compatibility_matrix.xml,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), use vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_PRODUCT)/etc/vintf/%,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use PRODUCT_MANIFEST_FILES / DEVICE_PRODUCT_COMPATIBILITY_MATRIX_FILE / vintf_compatibility_matrix / vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_SYSTEM_EXT)/etc/vintf/%,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use vintf_compatibility_matrix / vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_VENDOR)/etc/vintf/% \ |
| $(TARGET_COPY_OUT_VENDOR)/manifest.xml \ |
| $(TARGET_COPY_OUT_VENDOR)/compatibility_matrix.xml,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use DEVICE_MANIFEST_FILE / DEVICE_MATRIX_FILE / vintf_compatibility_matrix / vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_ODM)/etc/vintf/% \ |
| $(TARGET_COPY_OUT_ODM)/etc/manifest%,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use ODM_MANIFEST_FILES / vintf_fragments instead!)) \ |
| ) |
| endef |
| |
| # Phony target to check PRODUCT_COPY_FILES copy pairs don't contain ELF files |
| .PHONY: check-elf-prebuilt-product-copy-files |
| check-elf-prebuilt-product-copy-files: |
| |
| check_elf_prebuilt_product_copy_files := true |
| ifneq (,$(filter true,$(BUILD_BROKEN_ELF_PREBUILT_PRODUCT_COPY_FILES))) |
| check_elf_prebuilt_product_copy_files := |
| endif |
| check_elf_prebuilt_product_copy_files_hint := \ |
| found ELF prebuilt in PRODUCT_COPY_FILES, use cc_prebuilt_binary / cc_prebuilt_library_shared instead. |
| |
| # filter out the duplicate <source file>:<dest file> pairs. |
| unique_product_copy_files_pairs := |
| $(foreach cf,$(PRODUCT_COPY_FILES), \ |
| $(if $(filter $(unique_product_copy_files_pairs),$(cf)),,\ |
| $(eval unique_product_copy_files_pairs += $(cf)))) |
| unique_product_copy_files_destinations := |
| product_copy_files_ignored := |
| $(foreach cf,$(unique_product_copy_files_pairs), \ |
| $(eval _src := $(call word-colon,1,$(cf))) \ |
| $(eval _dest := $(call word-colon,2,$(cf))) \ |
| $(call check-product-copy-files,$(cf),$(_dest)) \ |
| $(if $(filter $(unique_product_copy_files_destinations),$(_dest)), \ |
| $(eval product_copy_files_ignored += $(cf)), \ |
| $(eval _fulldest := $(call append-path,$(PRODUCT_OUT),$(_dest))) \ |
| $(if $(filter %.xml,$(_dest)),\ |
| $(eval $(call copy-xml-file-checked,$(_src),$(_fulldest))),\ |
| $(if $(and $(filter %.jar,$(_dest)),$(filter $(basename $(notdir $(_dest))),$(PRODUCT_LOADED_BY_PRIVILEGED_MODULES))),\ |
| $(eval $(call copy-and-uncompress-dexs,$(_src),$(_fulldest))), \ |
| $(if $(filter init%rc,$(notdir $(_dest)))$(filter %/etc/init,$(dir $(_dest))),\ |
| $(eval $(call copy-init-script-file-checked,$(_src),$(_fulldest))),\ |
| $(if $(and $(filter true,$(check_elf_prebuilt_product_copy_files)), \ |
| $(filter bin lib lib64,$(subst /,$(space),$(_dest)))), \ |
| $(eval $(call copy-non-elf-file-checked,$(_src),$(_fulldest),$(check_elf_prebuilt_product_copy_files_hint))), \ |
| $(eval $(call copy-one-file,$(_src),$(_fulldest))))))) \ |
| $(eval unique_product_copy_files_destinations += $(_dest)))) |
| |
| # Dump a list of overriden (and ignored PRODUCT_COPY_FILES entries) |
| pcf_ignored_file := $(PRODUCT_OUT)/product_copy_files_ignored.txt |
| $(pcf_ignored_file): PRIVATE_IGNORED := $(sort $(product_copy_files_ignored)) |
| $(pcf_ignored_file): |
| echo "$(PRIVATE_IGNORED)" | tr " " "\n" >$@ |
| |
| $(call dist-for-goals,droidcore,$(pcf_ignored_file):logs/$(notdir $(pcf_ignored_file))) |
| |
| pcf_ignored_file := |
| product_copy_files_ignored := |
| unique_product_copy_files_pairs := |
| unique_product_copy_files_destinations := |
| |
| # ----------------------------------------------------------------- |
| # Returns the max allowed size for an image suitable for hash verification |
| # (e.g., boot.img, recovery.img, etc). |
| # The value 69632 derives from MAX_VBMETA_SIZE + MAX_FOOTER_SIZE in $(AVBTOOL). |
| # $(1): partition size to flash the image |
| define get-hash-image-max-size |
| $(if $(1), \ |
| $(if $(filter true,$(BOARD_AVB_ENABLE)), \ |
| $(eval _hash_meta_size := 69632), \ |
| $(eval _hash_meta_size := 0)) \ |
| $(1)-$(_hash_meta_size)) |
| endef |
| |
| # ----------------------------------------------------------------- |
| # Define rules to copy headers defined in copy_headers.mk |
| # If more than one makefile declared a header, print a warning, |
| # then copy the last one defined. This matches the previous make |
| # behavior. |
| has_dup_copy_headers := |
| $(foreach dest,$(ALL_COPIED_HEADERS), \ |
| $(eval _srcs := $(ALL_COPIED_HEADERS.$(dest).SRC)) \ |
| $(eval _src := $(lastword $(_srcs))) \ |
| $(if $(call streq,$(_src),$(_srcs)),, \ |
| $(warning Duplicate header copy: $(dest)) \ |
| $(warning _ Using $(_src)) \ |
| $(warning __ from $(lastword $(ALL_COPIED_HEADERS.$(dest).MAKEFILE))) \ |
| $(eval _makefiles := $$(wordlist 1,$(call int_subtract,$(words $(ALL_COPIED_HEADERS.$(dest).MAKEFILE)),1),$$(ALL_COPIED_HEADERS.$$(dest).MAKEFILE))) \ |
| $(foreach src,$(wordlist 1,$(call int_subtract,$(words $(_srcs)),1),$(_srcs)), \ |
| $(warning _ Ignoring $(src)) \ |
| $(warning __ from $(firstword $(_makefiles))) \ |
| $(eval _makefiles := $$(wordlist 2,9999,$$(_makefiles)))) \ |
| $(eval has_dup_copy_headers := true)) \ |
| $(eval $(call copy-one-header,$(_src),$(dest)))) |
| all_copied_headers: $(ALL_COPIED_HEADERS) |
| |
| ifdef has_dup_copy_headers |
| has_dup_copy_headers := |
| $(error duplicate header copies are no longer allowed. For more information about headers, see: https://android.googlesource.com/platform/build/soong/+/master/docs/best_practices.md#headers) |
| endif |
| |
| $(file >$(PRODUCT_OUT)/.copied_headers_list,$(TARGET_OUT_HEADERS) $(ALL_COPIED_HEADERS)) |
| |
| # ----------------------------------------------------------------- |
| # docs/index.html |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| gen := $(OUT_DOCS)/index.html |
| ALL_DOCS += $(gen) |
| $(gen): frameworks/base/docs/docs-redirect-index.html |
| @mkdir -p $(dir $@) |
| @cp -f $< $@ |
| endif |
| |
| ndk_doxygen_out := $(OUT_NDK_DOCS) |
| ndk_headers := $(SOONG_OUT_DIR)/ndk/sysroot/usr/include |
| ndk_docs_src_dir := frameworks/native/docs |
| ndk_doxyfile := $(ndk_docs_src_dir)/Doxyfile |
| ifneq ($(wildcard $(ndk_docs_src_dir)),) |
| ndk_docs_srcs := $(addprefix $(ndk_docs_src_dir)/,\ |
| $(call find-files-in-subdirs,$(ndk_docs_src_dir),"*",.)) |
| $(ndk_doxygen_out)/index.html: $(ndk_docs_srcs) $(SOONG_OUT_DIR)/ndk.timestamp |
| @mkdir -p $(ndk_doxygen_out) |
| @echo "Generating NDK docs to $(ndk_doxygen_out)" |
| @( cat $(ndk_doxyfile); \ |
| echo "INPUT=$(ndk_headers)"; \ |
| echo "HTML_OUTPUT=$(ndk_doxygen_out)" \ |
| ) | doxygen - |
| |
| # Note: Not a part of the docs target because we don't have doxygen available. |
| # You can run this target locally if you have doxygen installed. |
| ndk-docs: $(ndk_doxygen_out)/index.html |
| .PHONY: ndk-docs |
| endif |
| |
| $(call dist-for-goals,sdk,$(API_FINGERPRINT)) |
| |
| INSTALLED_RECOVERYIMAGE_TARGET := |
| # Build recovery image if |
| # BUILDING_RECOVERY_IMAGE && !BOARD_USES_RECOVERY_AS_BOOT && !BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT. |
| # If BOARD_USES_RECOVERY_AS_BOOT is true, leave empty because INSTALLED_BOOTIMAGE_TARGET is built |
| # with recovery resources. |
| # If BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT is true, leave empty to build recovery resources |
| # but not the final recovery image. |
| ifdef BUILDING_RECOVERY_IMAGE |
| ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| ifneq ($(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT),true) |
| INSTALLED_RECOVERYIMAGE_TARGET := $(PRODUCT_OUT)/recovery.img |
| endif |
| endif |
| endif |
| |
| include $(BUILD_SYSTEM)/sysprop.mk |
| |
| # ---------------------------------------------------------------- |
| |
| # ----------------------------------------------------------------- |
| # sdk-build.prop |
| # |
| # There are certain things in build.prop that we don't want to |
| # ship with the sdk; remove them. |
| |
| # This must be a list of entire property keys followed by |
| # "=" characters, without any internal spaces. |
| sdk_build_prop_remove := \ |
| ro.build.user= \ |
| ro.build.host= \ |
| ro.product.brand= \ |
| ro.product.manufacturer= \ |
| ro.product.device= |
| # TODO: Remove this soon-to-be obsolete property |
| sdk_build_prop_remove += ro.build.product= |
| INSTALLED_SDK_BUILD_PROP_TARGET := $(PRODUCT_OUT)/sdk/sdk-build.prop |
| $(INSTALLED_SDK_BUILD_PROP_TARGET): $(INSTALLED_BUILD_PROP_TARGET) |
| @echo SDK buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) grep -v "$(subst $(space),\|,$(strip \ |
| $(sdk_build_prop_remove)))" $< > $@.tmp |
| $(hide) for x in $(sdk_build_prop_remove); do \ |
| echo "$$x"generic >> $@.tmp; done |
| $(hide) mv $@.tmp $@ |
| |
| # ----------------------------------------------------------------- |
| # kernel modules |
| |
| # Depmod requires a well-formed kernel version so 0.0 is used as a placeholder. |
| DEPMOD_STAGING_SUBDIR :=$= lib/modules/0.0 |
| |
| define copy-and-strip-kernel-module |
| $(2): $(1) |
| $(LLVM_STRIP) -o $(2) --strip-debug $(1) |
| endef |
| |
| # $(1): modules list |
| # $(2): output dir |
| # $(3): mount point |
| # $(4): staging dir |
| # $(5): module load list |
| # $(6): module load list filename |
| # $(7): module archive |
| # $(8): staging dir for stripped modules |
| # $(9): module directory name |
| # Returns the a list of src:dest pairs to install the modules using copy-many-files. |
| define build-image-kernel-modules |
| $(if $(9), \ |
| $(eval _dir := $(9)/), \ |
| $(eval _dir :=)) \ |
| $(foreach module,$(1), \ |
| $(eval _src := $(module)) \ |
| $(if $(8), \ |
| $(eval _src := $(8)/$(notdir $(module))) \ |
| $(eval $(call copy-and-strip-kernel-module,$(module),$(_src)))) \ |
| $(_src):$(2)/lib/modules/$(_dir)$(notdir $(module))) \ |
| $(eval $(call build-image-kernel-modules-depmod,$(1),$(3),$(4),$(5),$(6),$(7),$(2),$(9))) \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/modules.dep:$(2)/lib/modules/$(_dir)modules.dep \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/modules.alias:$(2)/lib/modules/$(_dir)modules.alias \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/modules.softdep:$(2)/lib/modules/$(_dir)modules.softdep \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/$(6):$(2)/lib/modules/$(_dir)$(6) |
| endef |
| |
| # $(1): modules list |
| # $(2): mount point |
| # $(3): staging dir |
| # $(4): module load list |
| # $(5): module load list filename |
| # $(6): module archive |
| # $(7): output dir |
| # $(8): module directory name |
| # TODO(b/144844424): If a module archive is being used, this step (which |
| # generates obj/PACKAGING/.../modules.dep) also unzips the module archive into |
| # the output directory. This should be moved to a module with a |
| # LOCAL_POST_INSTALL_CMD so that if modules.dep is removed from the output dir, |
| # the archive modules are restored along with modules.dep. |
| define build-image-kernel-modules-depmod |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: .KATI_IMPLICIT_OUTPUTS := $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.alias $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.softdep $(3)/$(DEPMOD_STAGING_SUBDIR)/$(5) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: $(DEPMOD) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MODULES := $(1) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MOUNT_POINT := $(2) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MODULE_DIR := $(3)/$(DEPMOD_STAGING_SUBDIR)/$(2)/lib/modules/$(8) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_STAGING_DIR := $(3) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_LOAD_MODULES := $(4) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_LOAD_FILE := $(3)/$(DEPMOD_STAGING_SUBDIR)/$(5) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MODULE_ARCHIVE := $(6) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_OUTPUT_DIR := $(7) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: $(1) $(6) |
| @echo depmod $$(PRIVATE_STAGING_DIR) |
| rm -rf $$(PRIVATE_STAGING_DIR) |
| mkdir -p $$(PRIVATE_MODULE_DIR) |
| $(if $(6),\ |
| unzip -qoDD -d $$(PRIVATE_MODULE_DIR) $$(PRIVATE_MODULE_ARCHIVE); \ |
| mkdir -p $$(PRIVATE_OUTPUT_DIR)/lib; \ |
| cp -r $(3)/$(DEPMOD_STAGING_SUBDIR)/$(2)/lib/modules $$(PRIVATE_OUTPUT_DIR)/lib/; \ |
| find $$(PRIVATE_MODULE_DIR) -type f -name *.ko | xargs basename -a > $$(PRIVATE_LOAD_FILE); \ |
| ) |
| $(if $(1),\ |
| cp $$(PRIVATE_MODULES) $$(PRIVATE_MODULE_DIR)/; \ |
| for MODULE in $$(PRIVATE_LOAD_MODULES); do \ |
| basename $$$$MODULE >> $$(PRIVATE_LOAD_FILE); \ |
| done; \ |
| ) |
| $(DEPMOD) -b $$(PRIVATE_STAGING_DIR) 0.0 |
| # Turn paths in modules.dep into absolute paths |
| sed -i.tmp -e 's|\([^: ]*lib/modules/[^: ]*\)|/\1|g' $$(PRIVATE_STAGING_DIR)/$$(DEPMOD_STAGING_SUBDIR)/modules.dep |
| touch $$(PRIVATE_LOAD_FILE) |
| endef |
| |
| # $(1): staging dir |
| # $(2): modules list |
| # $(3): module load list |
| # $(4): module load list filename |
| # $(5): output dir |
| define module-load-list-copy-paths |
| $(eval $(call build-image-module-load-list,$(1),$(2),$(3),$(4))) \ |
| $(1)/$(DEPMOD_STAGING_SUBDIR)/$(4):$(5)/lib/modules/$(4) |
| endef |
| |
| # $(1): staging dir |
| # $(2): modules list |
| # $(3): module load list |
| # $(4): module load list filename |
| define build-image-module-load-list |
| $(1)/$(DEPMOD_STAGING_SUBDIR)/$(4): PRIVATE_LOAD_MODULES := $(3) |
| $(1)/$(DEPMOD_STAGING_SUBDIR)/$(4): $(2) |
| @echo load-list $$(@) |
| @echo '$$(strip $$(notdir $$(PRIVATE_LOAD_MODULES)))' | tr ' ' '\n' > $$(@) |
| endef |
| |
| # $(1): image name |
| # $(2): build output directory (TARGET_OUT_VENDOR, TARGET_RECOVERY_ROOT_OUT, etc) |
| # $(3): mount point |
| # $(4): module load filename |
| # $(5): stripped staging directory |
| # $(6): kernel module directory name (top is an out of band value for no directory) |
| define build-image-kernel-modules-dir |
| $(if $(filter top,$(6)),\ |
| $(eval _kver :=)$(eval _sep :=),\ |
| $(eval _kver := $(6))$(eval _sep :=_))\ |
| $(if $(5),\ |
| $(eval _stripped_staging_dir := $(5)$(_sep)$(_kver)),\ |
| $(eval _stripped_staging_dir :=))\ |
| $(if $(strip $(BOARD_$(1)_KERNEL_MODULES$(_sep)$(_kver))$(BOARD_$(1)_KERNEL_MODULES_ARCHIVE$(_sep)$(_kver))),\ |
| $(if $(BOARD_$(1)_KERNEL_MODULES_LOAD$(_sep)$(_kver)),,\ |
| $(eval BOARD_$(1)_KERNEL_MODULES_LOAD$(_sep)$(_kver) := $(BOARD_$(1)_KERNEL_MODULES$(_sep)$(_kver)))) \ |
| $(call copy-many-files,$(call build-image-kernel-modules,$(BOARD_$(1)_KERNEL_MODULES$(_sep)$(_kver)),$(2),$(3),$(call intermediates-dir-for,PACKAGING,depmod_$(1)$(_sep)$(_kver)),$(BOARD_$(1)_KERNEL_MODULES_LOAD$(_sep)$(_kver)),$(4),$(BOARD_$(1)_KERNEL_MODULES_ARCHIVE$(_sep)$(_kver)),$(_stripped_staging_dir),$(_kver)))) |
| endef |
| |
| # $(1): kernel module directory name (top is an out of band value for no directory) |
| define build-recovery-as-boot-load |
| $(if $(filter top,$(1)),\ |
| $(eval _kver :=)$(eval _sep :=),\ |
| $(eval _kver := $(1))$(eval _sep :=_))\ |
| $(if $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD$(_sep)$(_kver)),\ |
| $(call copy-many-files,$(call module-load-list-copy-paths,$(call intermediates-dir-for,PACKAGING,ramdisk_module_list$(_sep)$(_kver)),$(BOARD_GENERIC_RAMDISK_KERNEL_MODULES$(_sep)$(_kver)),$(BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD$(_sep)$(_kver)),modules.load,$(TARGET_RECOVERY_ROOT_OUT)))) |
| endef |
| |
| # $(1): kernel module directory name (top is an out of band value for no directory) |
| define build-vendor-ramdisk-recovery-load |
| $(if $(filter top,$(1)),\ |
| $(eval _kver :=)$(eval _sep :=),\ |
| $(eval _kver := $(1))$(eval _sep :=_))\ |
| $(if $(BOARD_VENDOR_RAMDISK_RECOVERY_KERNEL_MODULES_LOAD$(_sep)$(_kver)),\ |
| $(call copy-many-files,$(call module-load-list-copy-paths,$(call intermediates-dir-for,PACKAGING,vendor_ramdisk_recovery_module_list$(_sep)$(_kver)),$(BOARD_VENDOR_RAMDISK_KERNEL_MODULES$(_sep)$(_kver)),$(BOARD_VENDOR_RAMDISK_RECOVERY_KERNEL_MODULES_LOAD$(_sep)$(_kver)),modules.load.recovery,$(TARGET_VENDOR_RAMDISK_OUT)))) |
| endef |
| |
| # $(1): kernel module directory name (top is an out of band value for no directory) |
| define build-vendor-charger-load |
| $(if $(filter top,$(1)),\ |
| $(eval _kver :=)$(eval _sep :=),\ |
| $(eval _kver := $(1))$(eval _sep :=_))\ |
| $(if $(BOARD_VENDOR_CHARGER_KERNEL_MODULES_LOAD$(_sep)$(_kver)),\ |
| $(call copy-many-files,$(call module-load-list-copy-paths,$(call intermediates-dir-for,PACKAGING,vendor_charger_module_list$(_sep)$(_kver)),$(BOARD_VENDOR_CHARGER_KERNEL_MODULES$(_sep)$(_kver)),$(BOARD_VENDOR_CHARGER_KERNEL_MODULES_LOAD$(_sep)$(_kver)),modules.load.charger,$(TARGET_OUT_VENDOR)))) |
| endef |
| |
| ifneq ($(BUILDING_VENDOR_BOOT_IMAGE),true) |
| # If there is no vendor boot partition, store vendor ramdisk kernel modules in the |
| # boot ramdisk. |
| BOARD_GENERIC_RAMDISK_KERNEL_MODULES += $(BOARD_VENDOR_RAMDISK_KERNEL_MODULES) |
| BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD += $(BOARD_VENDOR_RAMDISK_KERNEL_MODULES_LOAD) |
| endif |
| |
| ifeq ($(BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD),) |
| BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD := $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES) |
| endif |
| |
| ifneq ($(strip $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES)),) |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT), true) |
| BOARD_RECOVERY_KERNEL_MODULES += $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES) |
| endif |
| endif |
| |
| ifneq ($(BOARD_DO_NOT_STRIP_VENDOR_MODULES),true) |
| VENDOR_STRIPPED_MODULE_STAGING_DIR := $(call intermediates-dir-for,PACKAGING,depmod_vendor_stripped) |
| else |
| VENDOR_STRIPPED_MODULE_STAGING_DIR := |
| endif |
| |
| ifneq ($(BOARD_DO_NOT_STRIP_VENDOR_RAMDISK_MODULES),true) |
| VENDOR_RAMDISK_STRIPPED_MODULE_STAGING_DIR := $(call intermediates-dir-for,PACKAGING,depmod_vendor_ramdisk_stripped) |
| else |
| VENDOR_RAMDISK_STRIPPED_MODULE_STAGING_DIR := |
| endif |
| |
| # Create the "kernel module directory" to "vendor ramdisk fragment" inverse mapping. |
| $(foreach vendor_ramdisk_fragment,$(BOARD_VENDOR_RAMDISK_FRAGMENTS), \ |
| $(if $(and $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).KERNEL_MODULE_DIRS), \ |
| $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).PREBUILT)), \ |
| $(error Must not specify KERNEL_MODULE_DIRS for prebuilt vendor ramdisk fragment "$(vendor_ramdisk_fragment)": $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).KERNEL_MODULE_DIRS))) \ |
| $(eval VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).STAGING_DIR := $(call intermediates-dir-for,PACKAGING,vendor_ramdisk_fragment-dlkm-$(vendor_ramdisk_fragment))) \ |
| $(eval VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).FILES :=) \ |
| $(foreach dir,$(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).KERNEL_MODULE_DIRS), \ |
| $(eval kmd_vrf := KERNEL_MODULE_DIR_VENDOR_RAMDISK_FRAGMENT_$(dir)) \ |
| $(if $($(kmd_vrf)),$(error Kernel module directory "$(dir)" belongs to multiple vendor ramdisk fragments: "$($(kmd_vrf))" "$(vendor_ramdisk_fragment)", each kernel module directory should belong to exactly one or none vendor ramdisk fragment)) \ |
| $(eval $(kmd_vrf) := $(vendor_ramdisk_fragment)) \ |
| ) \ |
| ) |
| |
| BOARD_KERNEL_MODULE_DIRS += top |
| $(foreach dir,$(BOARD_KERNEL_MODULE_DIRS), \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-image-kernel-modules-dir,RECOVERY,$(TARGET_RECOVERY_ROOT_OUT),,modules.load.recovery,,$(dir))) \ |
| $(eval vendor_ramdisk_fragment := $(KERNEL_MODULE_DIR_VENDOR_RAMDISK_FRAGMENT_$(dir))) \ |
| $(if $(vendor_ramdisk_fragment), \ |
| $(eval output_dir := $(VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).STAGING_DIR)) \ |
| $(eval result_var := VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).FILES) \ |
| $(eval ### else ###), \ |
| $(eval output_dir := $(TARGET_VENDOR_RAMDISK_OUT)) \ |
| $(eval result_var := ALL_DEFAULT_INSTALLED_MODULES)) \ |
| $(eval $(result_var) += $(call build-image-kernel-modules-dir,VENDOR_RAMDISK,$(output_dir),,modules.load,$(VENDOR_RAMDISK_STRIPPED_MODULE_STAGING_DIR),$(dir))) \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-vendor-ramdisk-recovery-load,$(dir))) \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-image-kernel-modules-dir,VENDOR,$(if $(filter true,$(BOARD_USES_VENDOR_DLKMIMAGE)),$(TARGET_OUT_VENDOR_DLKM),$(TARGET_OUT_VENDOR)),vendor,modules.load,$(VENDOR_STRIPPED_MODULE_STAGING_DIR),$(dir))) \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-vendor-charger-load,$(dir))) \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-image-kernel-modules-dir,ODM,$(if $(filter true,$(BOARD_USES_ODM_DLKMIMAGE)),$(TARGET_OUT_ODM_DLKM),$(TARGET_OUT_ODM)),odm,modules.load,,$(dir))) \ |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-recovery-as-boot-load,$(dir))),\ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-image-kernel-modules-dir,GENERIC_RAMDISK,$(TARGET_RAMDISK_OUT),,modules.load,,$(dir))))) |
| |
| # ----------------------------------------------------------------- |
| # Cert-to-package mapping. Used by the post-build signing tools. |
| # Use a macro to add newline to each echo command |
| # $1 stem name of the package |
| # $2 certificate |
| # $3 private key |
| # $4 compressed |
| # $5 partition tag |
| # $6 output file |
| define _apkcerts_write_line |
| $(hide) echo -n 'name="$(1).apk" certificate="$2" private_key="$3"' >> $6 |
| $(if $(4), $(hide) echo -n ' compressed="$4"' >> $6) |
| $(if $(5), $(hide) echo -n ' partition="$5"' >> $6) |
| $(hide) echo '' >> $6 |
| |
| endef |
| |
| # ----------------------------------------------------------------- |
| # Merge an individual apkcerts output into the final apkcerts.txt output. |
| # Use a macro to make it compatible with _apkcerts_write_line |
| # $1 apkcerts file to be merged |
| # $2 output file |
| define _apkcerts_merge |
| $(hide) cat $1 >> $2 |
| |
| endef |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-apkcerts-$(FILE_NAME_TAG) |
| intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,apkcerts) |
| APKCERTS_FILE := $(intermediates)/$(name).txt |
| all_apkcerts_files := $(sort $(foreach p,$(PACKAGES),$(PACKAGES.$(p).APKCERTS_FILE))) |
| $(APKCERTS_FILE): $(all_apkcerts_files) |
| # We don't need to really build all the modules. |
| # TODO: rebuild APKCERTS_FILE if any app change its cert. |
| $(APKCERTS_FILE): |
| @echo APK certs list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(foreach p,$(sort $(PACKAGES)),\ |
| $(if $(PACKAGES.$(p).APKCERTS_FILE),\ |
| $(call _apkcerts_merge,$(PACKAGES.$(p).APKCERTS_FILE), $@),\ |
| $(if $(PACKAGES.$(p).EXTERNAL_KEY),\ |
| $(call _apkcerts_write_line,$(PACKAGES.$(p).STEM),EXTERNAL,,$(PACKAGES.$(p).COMPRESSED),$(PACKAGES.$(p).PARTITION),$@),\ |
| $(call _apkcerts_write_line,$(PACKAGES.$(p).STEM),$(PACKAGES.$(p).CERTIFICATE),$(PACKAGES.$(p).PRIVATE_KEY),$(PACKAGES.$(p).COMPRESSED),$(PACKAGES.$(p).PARTITION),$@)))) |
| # In case value of PACKAGES is empty. |
| $(hide) touch $@ |
| |
| .PHONY: apkcerts-list |
| apkcerts-list: $(APKCERTS_FILE) |
| |
| ifneq (,$(TARGET_BUILD_APPS)) |
| $(call dist-for-goals, apps_only, $(APKCERTS_FILE):apkcerts.txt) |
| $(call dist-for-goals, apps_only, $(SOONG_APEX_KEYS_FILE):apexkeys.txt) |
| endif |
| |
| |
| # ----------------------------------------------------------------- |
| # build system stats |
| BUILD_SYSTEM_STATS := $(PRODUCT_OUT)/build_system_stats.txt |
| $(BUILD_SYSTEM_STATS): |
| @rm -f $@ |
| @$(foreach s,$(STATS.MODULE_TYPE),echo "modules_type_make,$(s),$(words $(STATS.MODULE_TYPE.$(s)))" >>$@;) |
| @$(foreach s,$(STATS.SOONG_MODULE_TYPE),echo "modules_type_soong,$(s),$(STATS.SOONG_MODULE_TYPE.$(s))" >>$@;) |
| $(call dist-for-goals,droidcore,$(BUILD_SYSTEM_STATS)) |
| |
| # ----------------------------------------------------------------- |
| # build /product/etc/security/avb/system_other.avbpubkey if needed |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| INSTALLED_PRODUCT_SYSTEM_OTHER_AVBKEY_TARGET := $(TARGET_OUT_PRODUCT_ETC)/security/avb/system_other.avbpubkey |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_PRODUCT_SYSTEM_OTHER_AVBKEY_TARGET) |
| endif # BOARD_AVB_ENABLE |
| endif # BUILDING_SYSTEM_OTHER_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # Modules ready to be converted to Soong, ordered by how many |
| # modules depend on them. |
| SOONG_CONV := $(sort $(SOONG_CONV)) |
| SOONG_CONV_DATA := $(call intermediates-dir-for,PACKAGING,soong_conversion)/soong_conv_data |
| $(SOONG_CONV_DATA): |
| @rm -f $@ |
| @$(foreach s,$(SOONG_CONV),echo "$(s),$(SOONG_CONV.$(s).TYPE),$(sort $(SOONG_CONV.$(s).PROBLEMS)),$(sort $(filter-out $(SOONG_ALREADY_CONV),$(SOONG_CONV.$(s).DEPS))),$(sort $(SOONG_CONV.$(s).MAKEFILES)),$(sort $(SOONG_CONV.$(s).INSTALLED))" >>$@;) |
| |
| SOONG_TO_CONVERT_SCRIPT := build/make/tools/soong_to_convert.py |
| SOONG_TO_CONVERT := $(PRODUCT_OUT)/soong_to_convert.txt |
| $(SOONG_TO_CONVERT): $(SOONG_CONV_DATA) $(SOONG_TO_CONVERT_SCRIPT) |
| @rm -f $@ |
| $(hide) $(SOONG_TO_CONVERT_SCRIPT) $< >$@ |
| $(call dist-for-goals,droidcore,$(SOONG_TO_CONVERT)) |
| |
| MK2BP_CATALOG_SCRIPT := build/make/tools/mk2bp_catalog.py |
| MK2BP_REMAINING_HTML := $(PRODUCT_OUT)/mk2bp_remaining.html |
| $(MK2BP_REMAINING_HTML): PRIVATE_CODE_SEARCH_BASE_URL := "https://cs.android.com/android/platform/superproject/+/master:" |
| $(MK2BP_REMAINING_HTML): $(SOONG_CONV_DATA) $(MK2BP_CATALOG_SCRIPT) |
| @rm -f $@ |
| $(hide) $(MK2BP_CATALOG_SCRIPT) \ |
| --device=$(TARGET_DEVICE) \ |
| --title="Remaining Android.mk files for $(TARGET_DEVICE)-$(TARGET_BUILD_VARIANT)" \ |
| --codesearch=$(PRIVATE_CODE_SEARCH_BASE_URL) \ |
| --out_dir="$(OUT_DIR)" \ |
| --mode=html \ |
| > $@ |
| $(call dist-for-goals,droidcore,$(MK2BP_REMAINING_HTML)) |
| |
| MK2BP_REMAINING_CSV := $(PRODUCT_OUT)/mk2bp_remaining.csv |
| $(MK2BP_REMAINING_CSV): $(SOONG_CONV_DATA) $(MK2BP_CATALOG_SCRIPT) |
| @rm -f $@ |
| $(hide) $(MK2BP_CATALOG_SCRIPT) \ |
| --device=$(TARGET_DEVICE) \ |
| --out_dir="$(OUT_DIR)" \ |
| --mode=csv \ |
| > $@ |
| $(call dist-for-goals,droidcore,$(MK2BP_REMAINING_CSV)) |
| |
| # ----------------------------------------------------------------- |
| # Modules use -Wno-error, or added default -Wall -Werror |
| WALL_WERROR := $(PRODUCT_OUT)/wall_werror.txt |
| $(WALL_WERROR): |
| @rm -f $@ |
| echo "# Modules using -Wno-error" >> $@ |
| for m in $(sort $(SOONG_MODULES_USING_WNO_ERROR) $(MODULES_USING_WNO_ERROR)); do echo $$m >> $@; done |
| echo "# Modules added default -Wall" >> $@ |
| for m in $(sort $(SOONG_MODULES_ADDED_WALL) $(MODULES_ADDED_WALL)); do echo $$m >> $@; done |
| |
| $(call dist-for-goals,droidcore,$(WALL_WERROR)) |
| |
| # ----------------------------------------------------------------- |
| # C/C++ flag information for modules |
| $(call dist-for-goals,droidcore,$(SOONG_MODULES_CFLAG_ARTIFACTS)) |
| |
| # ----------------------------------------------------------------- |
| # Modules missing profile files |
| PGO_PROFILE_MISSING := $(PRODUCT_OUT)/pgo_profile_file_missing.txt |
| $(PGO_PROFILE_MISSING): |
| @rm -f $@ |
| echo "# Modules missing PGO profile files" >> $@ |
| for m in $(SOONG_MODULES_MISSING_PGO_PROFILE_FILE); do echo $$m >> $@; done |
| |
| $(call dist-for-goals,droidcore,$(PGO_PROFILE_MISSING)) |
| |
| CERTIFICATE_VIOLATION_MODULES_FILENAME := $(PRODUCT_OUT)/certificate_violation_modules.txt |
| $(CERTIFICATE_VIOLATION_MODULES_FILENAME): |
| rm -f $@ |
| $(foreach m,$(sort $(CERTIFICATE_VIOLATION_MODULES)), echo $(m) >> $@;) |
| $(call dist-for-goals,droidcore,$(CERTIFICATE_VIOLATION_MODULES_FILENAME)) |
| |
| # ----------------------------------------------------------------- |
| # The dev key is used to sign this package, and as the key required |
| # for future OTA packages installed by this system. Actual product |
| # deliverables will be re-signed by hand. We expect this file to |
| # exist with the suffixes ".x509.pem" and ".pk8". |
| DEFAULT_KEY_CERT_PAIR := $(strip $(DEFAULT_SYSTEM_DEV_CERTIFICATE)) |
| |
| |
| # Rules that need to be present for the all targets, even |
| # if they don't do anything. |
| .PHONY: systemimage |
| systemimage: |
| |
| # ----------------------------------------------------------------- |
| |
| .PHONY: event-log-tags |
| |
| # Produce an event logs tag file for everything we know about, in order |
| # to properly allocate numbers. Then produce a file that's filtered |
| # for what's going to be installed. |
| |
| all_event_log_tags_file := $(TARGET_OUT_COMMON_INTERMEDIATES)/all-event-log-tags.txt |
| |
| event_log_tags_file := $(TARGET_OUT)/etc/event-log-tags |
| |
| # Include tags from all packages that we know about |
| all_event_log_tags_src := \ |
| $(sort $(foreach m, $(ALL_MODULES), $(ALL_MODULES.$(m).EVENT_LOG_TAGS))) |
| |
| $(all_event_log_tags_file): PRIVATE_SRC_FILES := $(all_event_log_tags_src) |
| $(all_event_log_tags_file): $(all_event_log_tags_src) $(MERGETAGS) build/make/tools/event_log_tags.py |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(MERGETAGS) -o $@ $(PRIVATE_SRC_FILES) |
| |
| # Include tags from all packages included in this product, plus all |
| # tags that are part of the system (ie, not in a vendor/ or device/ |
| # directory). |
| event_log_tags_src := \ |
| $(sort $(foreach m,\ |
| $(call resolve-bitness-for-modules,TARGET,$(PRODUCT_PACKAGES)) \ |
| $(call module-names-for-tag-list,user), \ |
| $(ALL_MODULES.$(m).EVENT_LOG_TAGS)) \ |
| $(filter-out vendor/% device/% out/%,$(all_event_log_tags_src))) |
| |
| $(event_log_tags_file): PRIVATE_SRC_FILES := $(event_log_tags_src) |
| $(event_log_tags_file): PRIVATE_MERGED_FILE := $(all_event_log_tags_file) |
| $(event_log_tags_file): $(event_log_tags_src) $(all_event_log_tags_file) $(MERGETAGS) build/make/tools/event_log_tags.py |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(MERGETAGS) -o $@ -m $(PRIVATE_MERGED_FILE) $(PRIVATE_SRC_FILES) |
| |
| event-log-tags: $(event_log_tags_file) |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(event_log_tags_file) |
| |
| |
| # ################################################################# |
| # Targets for boot/OS images |
| # ################################################################# |
| ifneq ($(strip $(TARGET_NO_BOOTLOADER)),true) |
| INSTALLED_BOOTLOADER_MODULE := $(PRODUCT_OUT)/bootloader |
| ifdef BOARD_PREBUILT_BOOTLOADER |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_BOOTLOADER),$(INSTALLED_BOOTLOADER_MODULE))) |
| $(call dist-for-goals,dist_files,$(INSTALLED_BOOTLOADER_MODULE)) |
| endif # BOARD_PREBUILT_BOOTLOADER |
| ifeq ($(strip $(TARGET_BOOTLOADER_IS_2ND)),true) |
| INSTALLED_2NDBOOTLOADER_TARGET := $(PRODUCT_OUT)/2ndbootloader |
| else |
| INSTALLED_2NDBOOTLOADER_TARGET := |
| endif |
| else |
| INSTALLED_BOOTLOADER_MODULE := |
| INSTALLED_2NDBOOTLOADER_TARGET := |
| endif # TARGET_NO_BOOTLOADER |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| ifneq ($(strip $(BOARD_KERNEL_BINARIES)),) |
| INSTALLED_KERNEL_TARGET := $(foreach k,$(BOARD_KERNEL_BINARIES), \ |
| $(PRODUCT_OUT)/$(k)) |
| else |
| INSTALLED_KERNEL_TARGET := $(PRODUCT_OUT)/kernel |
| endif |
| else |
| INSTALLED_KERNEL_TARGET := |
| endif |
| |
| # ----------------------------------------------------------------- |
| # the root dir |
| INTERNAL_ROOT_FILES := $(filter $(TARGET_ROOT_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_ROOT := $(PRODUCT_OUT)/installed-files-root.txt |
| INSTALLED_FILES_JSON_ROOT := $(INSTALLED_FILES_FILE_ROOT:.txt=.json) |
| $(INSTALLED_FILES_FILE_ROOT): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_ROOT) |
| $(INSTALLED_FILES_FILE_ROOT) : $(INTERNAL_ROOT_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_ROOT_OUT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| $(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE_ROOT)) |
| |
| #------------------------------------------------------------------ |
| # dtb |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INSTALLED_DTBIMAGE_TARGET := $(PRODUCT_OUT)/dtb.img |
| ifdef BOARD_PREBUILT_DTBIMAGE_DIR |
| $(INSTALLED_DTBIMAGE_TARGET) : $(sort $(wildcard $(BOARD_PREBUILT_DTBIMAGE_DIR)/*.dtb)) |
| cat $^ > $@ |
| endif |
| endif |
| |
| # ----------------------------------------------------------------- |
| # the ramdisk |
| ifdef BUILDING_RAMDISK_IMAGE |
| INTERNAL_RAMDISK_FILES := $(filter $(TARGET_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_RAMDISK := $(PRODUCT_OUT)/installed-files-ramdisk.txt |
| INSTALLED_FILES_JSON_RAMDISK := $(INSTALLED_FILES_FILE_RAMDISK:.txt=.json) |
| $(INSTALLED_FILES_FILE_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_RAMDISK) |
| $(INSTALLED_FILES_FILE_RAMDISK) : $(INTERNAL_RAMDISK_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(TARGET_RAMDISK_OUT) |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_RAMDISK_OUT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| $(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE_RAMDISK)) |
| BUILT_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk.img |
| |
| ifeq ($(BOARD_RAMDISK_USE_LZ4),true) |
| # -l enables the legacy format used by the Linux kernel |
| COMPRESSION_COMMAND_DEPS := $(LZ4) |
| COMPRESSION_COMMAND := $(LZ4) -l -12 --favor-decSpeed |
| RAMDISK_EXT := .lz4 |
| else |
| COMPRESSION_COMMAND_DEPS := $(MINIGZIP) |
| COMPRESSION_COMMAND := $(MINIGZIP) |
| RAMDISK_EXT := .gz |
| endif |
| |
| # We just build this directly to the install location. |
| INSTALLED_RAMDISK_TARGET := $(BUILT_RAMDISK_TARGET) |
| $(INSTALLED_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_RAMDISK_FILES) $(INSTALLED_FILES_FILE_RAMDISK) | $(COMPRESSION_COMMAND_DEPS) |
| $(call pretty,"Target ram disk: $@") |
| $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RAMDISK_OUT) | $(COMPRESSION_COMMAND) > $@ |
| |
| .PHONY: ramdisk-nodeps |
| ramdisk-nodeps: $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RAMDISK_OUT) | $(COMPRESSION_COMMAND) > $(INSTALLED_RAMDISK_TARGET) |
| |
| endif # BUILDING_RAMDISK_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # the boot image, which is a collection of other images. |
| |
| # This is defined here since we may be building recovery as boot |
| # below and only want to define this once |
| ifneq ($(strip $(BOARD_KERNEL_BINARIES)),) |
| BUILT_BOOTIMAGE_TARGET := $(foreach k,$(subst kernel,boot,$(BOARD_KERNEL_BINARIES)), $(PRODUCT_OUT)/$(k).img) |
| else |
| BUILT_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img |
| endif |
| |
| INTERNAL_PREBUILT_BOOTIMAGE := |
| |
| my_installed_prebuilt_gki_apex := $(strip $(foreach package,$(PRODUCT_PACKAGES),$(if $(ALL_MODULES.$(package).EXTRACTED_BOOT_IMAGE),$(package)))) |
| ifdef my_installed_prebuilt_gki_apex |
| ifneq (1,$(words $(my_installed_prebuilt_gki_apex))) # len(my_installed_prebuilt_gki_apex) > 1 |
| $(error More than one prebuilt GKI APEXes are installed: $(my_installed_prebuilt_gki_apex)) |
| endif # len(my_installed_prebuilt_gki_apex) > 1 |
| |
| ifdef BOARD_PREBUILT_BOOTIMAGE |
| $(error Must not define BOARD_PREBUILT_BOOTIMAGE because a prebuilt GKI APEX is installed: $(my_installed_prebuilt_gki_apex)) |
| endif # BOARD_PREBUILT_BOOTIMAGE defined |
| |
| my_apex_extracted_boot_image := $(ALL_MODULES.$(my_installed_prebuilt_gki_apex).EXTRACTED_BOOT_IMAGE) |
| INSTALLED_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img |
| $(eval $(call copy-one-file,$(my_apex_extracted_boot_image),$(INSTALLED_BOOTIMAGE_TARGET))) |
| |
| INTERNAL_PREBUILT_BOOTIMAGE := $(my_apex_extracted_boot_image) |
| |
| else # my_installed_prebuilt_gki_apex not defined |
| |
| # $1: boot image target |
| # returns the kernel used to make the bootimage |
| define bootimage-to-kernel |
| $(if $(BOARD_KERNEL_BINARIES),\ |
| $(PRODUCT_OUT)/$(subst .img,,$(subst boot,kernel,$(notdir $(1)))),\ |
| $(INSTALLED_KERNEL_TARGET)) |
| endef |
| |
| ifdef BOARD_BOOTIMAGE_PARTITION_SIZE |
| BOARD_KERNEL_BOOTIMAGE_PARTITION_SIZE := $(BOARD_BOOTIMAGE_PARTITION_SIZE) |
| endif |
| |
| # $1: boot image file name |
| # $2: boot image variant (boot, boot-debug) |
| define get-bootimage-partition-size |
| $(BOARD_$(call to-upper,$(subst .img,,$(subst $(2),kernel,$(notdir $(1)))))_BOOTIMAGE_PARTITION_SIZE) |
| endef |
| |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| INTERNAL_BOOTIMAGE_ARGS := \ |
| $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) |
| |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| INTERNAL_BOOTIMAGE_ARGS += --ramdisk $(INSTALLED_RAMDISK_TARGET) |
| endif |
| |
| ifndef BUILDING_VENDOR_BOOT_IMAGE |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INTERNAL_BOOTIMAGE_ARGS += --dtb $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| endif |
| |
| INTERNAL_BOOTIMAGE_FILES := $(filter-out --%,$(INTERNAL_BOOTIMAGE_ARGS)) |
| |
| ifeq ($(PRODUCT_SUPPORTS_VERITY),true) |
| ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| VERITY_KEYID := veritykeyid=id:`openssl x509 -in $(PRODUCT_VERITY_SIGNING_KEY).x509.pem -text \ |
| | grep keyid | sed 's/://g' | tr -d '[:space:]' | tr '[:upper:]' '[:lower:]' | sed 's/keyid//g'` |
| endif |
| endif |
| |
| INTERNAL_KERNEL_CMDLINE := $(strip $(INTERNAL_KERNEL_CMDLINE) buildvariant=$(TARGET_BUILD_VARIANT) $(VERITY_KEYID)) |
| |
| # kernel cmdline/base/pagesize in boot. |
| # - If using GKI, use GENERIC_KERNEL_CMDLINE. Remove kernel base and pagesize because they are |
| # device-specific. |
| # - If not using GKI: |
| # - If building vendor_boot, INTERNAL_KERNEL_CMDLINE, base and pagesize goes in vendor_boot. |
| # - Otherwise, put them in boot. |
| ifeq (true,$(BOARD_USES_GENERIC_KERNEL_IMAGE)) |
| ifdef GENERIC_KERNEL_CMDLINE |
| INTERNAL_BOOTIMAGE_ARGS += --cmdline "$(GENERIC_KERNEL_CMDLINE)" |
| endif |
| else ifndef BUILDING_VENDOR_BOOT_IMAGE # && BOARD_USES_GENERIC_KERNEL_IMAGE != true |
| ifdef INTERNAL_KERNEL_CMDLINE |
| INTERNAL_BOOTIMAGE_ARGS += --cmdline "$(INTERNAL_KERNEL_CMDLINE)" |
| endif |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_BOOTIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_BOOTIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| endif # BUILDING_VENDOR_BOOT_IMAGE == "" && BOARD_USES_GENERIC_KERNEL_IMAGE != true |
| |
| INTERNAL_MKBOOTIMG_VERSION_ARGS := \ |
| --os_version $(PLATFORM_VERSION_LAST_STABLE) \ |
| --os_patch_level $(PLATFORM_SECURITY_PATCH) |
| |
| # Define these only if we are building boot |
| ifdef BUILDING_BOOT_IMAGE |
| INSTALLED_BOOTIMAGE_TARGET := $(BUILT_BOOTIMAGE_TARGET) |
| |
| ifeq ($(TARGET_BOOTIMAGE_USE_EXT2),true) |
| $(error TARGET_BOOTIMAGE_USE_EXT2 is not supported anymore) |
| endif # TARGET_BOOTIMAGE_USE_EXT2 |
| |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET), $(eval $(call add-dependency,$(b),$(call bootimage-to-kernel,$(b))))) |
| |
| ifeq (true,$(BOARD_AVB_ENABLE)) |
| |
| # $1: boot image target |
| define build_boot_board_avb_enabled |
| $(MKBOOTIMG) --kernel $(call bootimage-to-kernel,$(1)) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1) |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(call get-bootimage-partition-size,$(1),boot))) |
| $(AVBTOOL) add_hash_footer \ |
| --image $(1) \ |
| --partition_size $(call get-bootimage-partition-size,$(1),boot) \ |
| --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) |
| endef |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(AVBTOOL) $(INTERNAL_BOOTIMAGE_FILES) $(BOARD_AVB_BOOT_KEY_PATH) |
| $(call pretty,"Target boot image: $@") |
| $(call build_boot_board_avb_enabled,$@) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH) |
| @echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET),$(call build_boot_board_avb_enabled,$(b))) |
| |
| else ifeq (true,$(PRODUCT_SUPPORTS_BOOT_SIGNER)) # BOARD_AVB_ENABLE != true |
| |
| # $1: boot image target |
| define build_boot_supports_boot_signer |
| $(MKBOOTIMG) --kernel $(call bootimage-to-kernel,$(1)) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1) |
| $(BOOT_SIGNER) /boot $@ $(PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1) |
| $(call assert-max-image-size,$(1),$(call get-bootimage-partition-size,$(1),boot)) |
| endef |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(BOOT_SIGNER) |
| $(call pretty,"Target boot image: $@") |
| $(call build_boot_supports_boot_signer,$@) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(BOOT_SIGNER) |
| @echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET),$(call build_boot_supports_boot_signer,$(b))) |
| |
| else ifeq (true,$(PRODUCT_SUPPORTS_VBOOT)) # PRODUCT_SUPPORTS_BOOT_SIGNER != true |
| |
| # $1: boot image target |
| define build_boot_supports_vboot |
| $(MKBOOTIMG) --kernel $(call bootimage-to-kernel,$(1)) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1).unsigned |
| $(VBOOT_SIGNER) $(FUTILITY) $(1).unsigned $(PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $(1).keyblock $(1) |
| $(call assert-max-image-size,$(1),$(call get-bootimage-partition-size,$(1),boot)) |
| endef |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(VBOOT_SIGNER) $(FUTILITY) |
| $(call pretty,"Target boot image: $@") |
| $(call build_boot_supports_vboot,$@) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(VBOOT_SIGNER) $(FUTILITY) |
| @echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET),$(call build_boot_supports_vboot,$(b))) |
| |
| else # PRODUCT_SUPPORTS_VBOOT != true |
| |
| # $1: boot image target |
| define build_boot_novboot |
| $(MKBOOTIMG) --kernel $(call bootimage-to-kernel,$(1)) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1) |
| $(call assert-max-image-size,$1,$(call get-bootimage-partition-size,$(1),boot)) |
| endef |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) |
| $(call pretty,"Target boot image: $@") |
| $(call build_boot_novboot,$@) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) |
| @echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET),$(call build_boot_novboot,$(b))) |
| |
| endif # BOARD_AVB_ENABLE |
| endif # BUILDING_BOOT_IMAGE |
| |
| else # TARGET_NO_KERNEL == "true" |
| ifdef BOARD_PREBUILT_BOOTIMAGE |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| # Remove when b/63676296 is resolved. |
| $(error Prebuilt bootimage is only supported for AB targets) |
| endif |
| INTERNAL_PREBUILT_BOOTIMAGE := $(BOARD_PREBUILT_BOOTIMAGE) |
| INSTALLED_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img |
| $(eval $(call copy-one-file,$(INTERNAL_PREBUILT_BOOTIMAGE),$(INSTALLED_BOOTIMAGE_TARGET))) |
| else # BOARD_PREBUILT_BOOTIMAGE not defined |
| INSTALLED_BOOTIMAGE_TARGET := |
| endif # BOARD_PREBUILT_BOOTIMAGE |
| endif # TARGET_NO_KERNEL |
| endif # my_installed_prebuilt_gki_apex not defined |
| |
| my_apex_extracted_boot_image := |
| my_installed_prebuilt_gki_apex := |
| |
| # ----------------------------------------------------------------- |
| # declare recovery ramdisk files |
| ifeq ($(BUILDING_RECOVERY_IMAGE),true) |
| INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP := $(call intermediates-dir-for,PACKAGING,recovery)/ramdisk_files-timestamp |
| endif |
| |
| # ----------------------------------------------------------------- |
| # vendor boot image |
| ifeq ($(BUILDING_VENDOR_BOOT_IMAGE),true) |
| |
| ifeq ($(PRODUCT_SUPPORTS_VERITY),true) |
| $(error vboot 1.0 does not support vendor_boot partition) |
| endif |
| |
| INTERNAL_VENDOR_RAMDISK_FILES := $(filter $(TARGET_VENDOR_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INTERNAL_VENDOR_RAMDISK_TARGET := $(call intermediates-dir-for,PACKAGING,vendor-boot)/vendor-ramdisk.cpio$(RAMDISK_EXT) |
| |
| ifeq (true,$(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT)) |
| $(INTERNAL_VENDOR_RAMDISK_TARGET): $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP) |
| $(INTERNAL_VENDOR_RAMDISK_TARGET): PRIVATE_ADDITIONAL_DIR := $(TARGET_RECOVERY_ROOT_OUT) |
| endif |
| |
| $(INTERNAL_VENDOR_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_VENDOR_RAMDISK_FILES) | $(COMPRESSION_COMMAND_DEPS) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_VENDOR_RAMDISK_OUT) $(PRIVATE_ADDITIONAL_DIR) | $(COMPRESSION_COMMAND) > $@ |
| |
| INSTALLED_FILES_FILE_VENDOR_RAMDISK := $(PRODUCT_OUT)/installed-files-vendor-ramdisk.txt |
| INSTALLED_FILES_JSON_VENDOR_RAMDISK := $(INSTALLED_FILES_FILE_VENDOR_RAMDISK:.txt=.json) |
| $(INSTALLED_FILES_FILE_VENDOR_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_VENDOR_RAMDISK) |
| $(INSTALLED_FILES_FILE_VENDOR_RAMDISK): $(INTERNAL_VENDOR_RAMDISK_TARGET) |
| $(INSTALLED_FILES_FILE_VENDOR_RAMDISK): $(INTERNAL_VENDOR_RAMDISK_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_VENDOR_RAMDISK_OUT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --dtb $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| ifdef INTERNAL_KERNEL_CMDLINE |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --vendor_cmdline "$(INTERNAL_KERNEL_CMDLINE)" |
| endif |
| |
| # $(1): Build target name |
| # $(2): Staging dir to be compressed |
| # $(3): Build dependencies |
| define build-vendor-ramdisk-fragment-target |
| $(1): $(3) $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(2) | $(COMPRESSION_COMMAND) > $$@ |
| endef |
| |
| # $(1): Ramdisk name |
| define build-vendor-ramdisk-fragment |
| $(strip \ |
| $(eval build_target := $(call intermediates-dir-for,PACKAGING,vendor_ramdisk_fragments)/$(1).cpio$(RAMDISK_EXT)) \ |
| $(eval $(call build-vendor-ramdisk-fragment-target,$(build_target),$(VENDOR_RAMDISK_FRAGMENT.$(1).STAGING_DIR),$(VENDOR_RAMDISK_FRAGMENT.$(1).FILES))) \ |
| $(build_target) \ |
| ) |
| endef |
| |
| # $(1): Ramdisk name |
| # $(2): Prebuilt file path |
| define build-prebuilt-vendor-ramdisk-fragment |
| $(strip \ |
| $(eval build_target := $(call intermediates-dir-for,PACKAGING,prebuilt_vendor_ramdisk_fragments)/$(1)) \ |
| $(eval $(call copy-one-file,$(2),$(build_target))) \ |
| $(build_target) \ |
| ) |
| endef |
| |
| INTERNAL_VENDOR_RAMDISK_FRAGMENT_TARGETS := |
| INTERNAL_VENDOR_RAMDISK_FRAGMENT_ARGS := |
| |
| $(foreach vendor_ramdisk_fragment,$(BOARD_VENDOR_RAMDISK_FRAGMENTS), \ |
| $(eval prebuilt_vendor_ramdisk_fragment_file := $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).PREBUILT)) \ |
| $(if $(prebuilt_vendor_ramdisk_fragment_file), \ |
| $(eval vendor_ramdisk_fragment_target := $(call build-prebuilt-vendor-ramdisk-fragment,$(vendor_ramdisk_fragment),$(prebuilt_vendor_ramdisk_fragment_file))) \ |
| $(eval ### else ###), \ |
| $(eval vendor_ramdisk_fragment_target := $(call build-vendor-ramdisk-fragment,$(vendor_ramdisk_fragment))) \ |
| $(if $(filter --ramdisk_type,$(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).MKBOOTIMG_ARGS)),, \ |
| $(eval BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).MKBOOTIMG_ARGS += --ramdisk_type DLKM))) \ |
| $(eval INTERNAL_VENDOR_RAMDISK_FRAGMENT_TARGETS += $(vendor_ramdisk_fragment_target)) \ |
| $(eval INTERNAL_VENDOR_RAMDISK_FRAGMENT_ARGS += $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).MKBOOTIMG_ARGS) --vendor_ramdisk_fragment $(vendor_ramdisk_fragment_target)) \ |
| ) |
| |
| INSTALLED_VENDOR_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/vendor_boot.img |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_VENDOR_RAMDISK_TARGET) $(INSTALLED_DTBIMAGE_TARGET) |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET): $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_TARGETS) |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_VENDOR_BOOTIMAGE_KEY_PATH) |
| $(call pretty,"Target vendor_boot image: $@") |
| $(MKBOOTIMG) $(INTERNAL_VENDOR_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --vendor_ramdisk $(INTERNAL_VENDOR_RAMDISK_TARGET) $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_ARGS) --vendor_boot $@ |
| $(call assert-max-image-size,$@,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| --partition_size $(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE) \ |
| --partition_name vendor_boot $(INTERNAL_AVB_VENDOR_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS) |
| else |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET): |
| $(call pretty,"Target vendor_boot image: $@") |
| $(MKBOOTIMG) $(INTERNAL_VENDOR_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --vendor_ramdisk $(INTERNAL_VENDOR_RAMDISK_TARGET) $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_ARGS) --vendor_boot $@ |
| $(call assert-max-image-size,$@,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| endif |
| endif # BUILDING_VENDOR_BOOT_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # NOTICE files |
| # |
| # We are required to publish the licenses for all code under BSD, GPL and |
| # Apache licenses (and possibly other more exotic ones as well). We err on the |
| # side of caution, so the licenses for other third-party code are included here |
| # too. |
| # |
| # This needs to be before the systemimage rules, because it adds to |
| # ALL_DEFAULT_INSTALLED_MODULES, which those use to pick which files |
| # go into the systemimage. |
| |
| .PHONY: notice_files |
| |
| # Create the rule to combine the files into text and html/xml forms |
| # $(1) - xml_excluded_system_product_odm_vendor_dlkm_odm_dlkm| |
| # xml_excluded_vendor_product_odm_vendor_dlkm_odm_dlkm| |
| # xml_product|xml_odm|xml_system_ext|xml_system|xml_vendor_dlkm| |
| # xml_odm_dlkm|html |
| # $(2) - Plain text output file |
| # $(3) - HTML/XML output file |
| # $(4) - File title |
| # $(5) - Directory to use. Notice files are all $(5)/src. Other |
| # directories in there will be used for scratch |
| # $(6) - Dependencies for the output files |
| # $(7) - Directories to exclude |
| # |
| # The algorithm here is that we go collect a hash for each of the notice |
| # files and write the names of the files that match that hash. Then |
| # to generate the real files, we go print out all of the files and their |
| # hashes. |
| # |
| # These rules are fairly complex, so they depend on this makefile so if |
| # it changes, they'll run again. |
| # |
| # TODO: We could clean this up so that we just record the locations of the |
| # original notice files instead of making rules to copy them somwehere. |
| # Then we could traverse that without quite as much bash drama. |
| define combine-notice-files |
| $(2): PRIVATE_MESSAGE := $(4) |
| $(2): PRIVATE_DIR := $(5) |
| $(2): .KATI_IMPLICIT_OUTPUTS := $(3) |
| $(2): $(6) $(BUILD_SYSTEM)/Makefile build/make/tools/generate-notice-files.py |
| build/make/tools/generate-notice-files.py --text-output $(2) $(foreach xdir, $(7), -e $(xdir) )\ |
| $(if $(filter $(1),xml_excluded_vendor_product_odm_vendor_dlkm_odm_dlkm),-e vendor -e product -e system_ext -e odm -e vendor_dlkm -e odm_dlkm --xml-output, \ |
| $(if $(filter $(1),xml_excluded_system_product_odm_vendor_dlkm_odm_dlkm),-e system -e product -e system_ext -e odm -e vendor_dlkm -e odm_dlkm --xml-output, \ |
| $(if $(filter $(1),xml_product),-i product --xml-output, \ |
| $(if $(filter $(1),xml_system_ext),-i system_ext --xml-output, \ |
| $(if $(filter $(1),xml_system),-i system --xml-output, \ |
| $(if $(filter $(1),xml_odm),-i odm --xml-output, \ |
| $(if $(filter $(1),xml_vendor_dlkm),-i vendor_dlkm --xml-output, \ |
| $(if $(filter $(1),xml_odm_dlkm),-i odm_dlkm --xml-output, \ |
| --html-output)))))))) $(3) \ |
| -t $$(PRIVATE_MESSAGE) $$(foreach dir,$$(sort $$(PRIVATE_DIR)), -s $$(dir)/src) |
| notice_files: $(2) $(3) |
| endef |
| |
| # Notice file logic isn't relevant for TARGET_BUILD_APPS |
| ifndef TARGET_BUILD_APPS |
| |
| # TODO These intermediate NOTICE.txt/NOTICE.html files should go into |
| # TARGET_OUT_NOTICE_FILES now that the notice files are gathered from |
| # the src subdirectory. |
| target_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE.txt |
| tools_notice_file_txt := $(HOST_OUT_INTERMEDIATES)/NOTICE.txt |
| tools_notice_file_html := $(HOST_OUT_INTERMEDIATES)/NOTICE.html |
| kernel_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/kernel.txt |
| winpthreads_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/winpthreads.txt |
| |
| # Some targets get included under $(PRODUCT_OUT) for debug symbols or other |
| # reasons--not to be flashed onto any device. Targets under these directories |
| # need no associated notice file on the device UI. |
| exclude_target_dirs := apex |
| |
| # TODO(b/69865032): Make PRODUCT_NOTICE_SPLIT the default behavior. |
| ifneq ($(PRODUCT_NOTICE_SPLIT),true) |
| target_notice_file_html := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html |
| target_notice_file_html_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html.gz |
| installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.html.gz |
| $(eval $(call combine-notice-files, html, \ |
| $(target_notice_file_txt), \ |
| $(target_notice_file_html), \ |
| "Notices for files contained in the filesystem images in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file), \ |
| $(exclude_target_dirs))) |
| $(target_notice_file_html_gz): $(target_notice_file_html) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(installed_notice_html_or_xml_gz): $(target_notice_file_html_gz) |
| $(copy-file-to-target) |
| else |
| target_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml |
| target_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml.gz |
| installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.xml.gz |
| |
| target_vendor_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.txt |
| target_vendor_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml |
| target_vendor_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml.gz |
| installed_vendor_notice_xml_gz := $(TARGET_OUT_VENDOR)/etc/NOTICE.xml.gz |
| |
| target_product_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.txt |
| target_product_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.xml |
| target_product_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.xml.gz |
| installed_product_notice_xml_gz := $(TARGET_OUT_PRODUCT)/etc/NOTICE.xml.gz |
| |
| target_system_ext_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_EXT.txt |
| target_system_ext_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_EXT.xml |
| target_system_ext_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_EXT.xml.gz |
| installed_system_ext_notice_xml_gz := $(TARGET_OUT_SYSTEM_EXT)/etc/NOTICE.xml.gz |
| |
| target_odm_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM.txt |
| target_odm_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM.xml |
| target_odm_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM.xml.gz |
| installed_odm_notice_xml_gz := $(TARGET_OUT_ODM)/etc/NOTICE.xml.gz |
| |
| target_vendor_dlkm_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR_DLKM.txt |
| target_vendor_dlkm_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR_DLKM.xml |
| target_vendor_dlkm_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR_DLKM.xml.gz |
| installed_vendor_dlkm_notice_xml_gz := $(TARGET_OUT_VENDOR_DLKM)/etc/NOTICE.xml.gz |
| |
| target_odm_dlkm_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM_DLKM.txt |
| target_odm_dlkm_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM_DLKM.xml |
| target_odm_dlkm_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM_DLKM.xml.gz |
| installed_odm_dlkm_notice_xml_gz := $(TARGET_OUT_ODM_DLKM)/etc/NOTICE.xml.gz |
| |
| # Notice files are copied to TARGET_OUT_NOTICE_FILES as a side-effect of their module |
| # being built. A notice xml file must depend on all modules that could potentially |
| # install a license file relevant to it. |
| license_modules := $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) |
| # Only files copied to a system image need system image notices. |
| license_modules := $(filter $(PRODUCT_OUT)/%,$(license_modules)) |
| # Phonys/fakes don't have notice files (though their deps might) |
| license_modules := $(filter-out $(TARGET_OUT_FAKE)/%,$(license_modules)) |
| # testcases are not relevant to the system image. |
| license_modules := $(filter-out $(TARGET_OUT_TESTCASES)/%,$(license_modules)) |
| # filesystem images: system, vendor, product, system_ext, odm, vendor_dlkm, and odm_dlkm |
| license_modules_system := $(filter $(TARGET_OUT)/%,$(license_modules)) |
| # system_other is relevant to system partition. |
| license_modules_system += $(filter $(TARGET_OUT_SYSTEM_OTHER)/%,$(license_modules)) |
| license_modules_vendor := $(filter $(TARGET_OUT_VENDOR)/%,$(license_modules)) |
| license_modules_product := $(filter $(TARGET_OUT_PRODUCT)/%,$(license_modules)) |
| license_modules_system_ext := $(filter $(TARGET_OUT_SYSTEM_EXT)/%,$(license_modules)) |
| license_modules_odm := $(filter $(TARGET_OUT_ODM)/%,$(license_modules)) |
| license_modules_vendor_dlkm := $(filter $(TARGET_OUT_VENDOR_DLKM)/%,$(license_modules)) |
| license_modules_odm_dlkm := $(filter $(TARGET_OUT_ODM_DLKM)/%,$(license_modules)) |
| license_modules_agg := $(license_modules_system) \ |
| $(license_modules_vendor) \ |
| $(license_modules_product) \ |
| $(license_modules_system_ext) \ |
| $(license_modules_odm) \ |
| $(license_modules_vendor_dlkm) \ |
| $(license_modules_odm_dlkm) |
| # targets used for debug symbols only and do not get copied to the device |
| license_modules_symbols_only := $(filter $(PRODUCT_OUT)/apex/%,$(license_modules)) |
| |
| license_modules_rest := $(filter-out $(license_modules_agg),$(license_modules)) |
| license_modules_rest := $(filter-out $(license_modules_symbols_only),$(license_modules_rest)) |
| |
| # Identify the other targets we expect to have notices for: |
| # targets copied to the device but are not readable by the UI (e.g. must boot |
| # into a different partition to read or don't have an associated /etc |
| # directory) must have their notices built somewhere readable. |
| license_modules_rehomed := $(filter-out $(PRODUCT_OUT)/%/%,$(license_modules_rest)) # files in root have no /etc |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/recovery/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/root/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/data/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/ramdisk/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/debug_ramdisk/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/vendor-ramdisk/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/persist/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/persist.img,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/system_other/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/kernel%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/%.img,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/%.bin,$(license_modules_rest)) |
| |
| # after removing targets in system images, targets reported in system images, and |
| # targets used for debug symbols that do not need notices, nothing must remain. |
| license_modules_rest := $(filter-out $(license_modules_rehomed),$(license_modules_rest)) |
| $(call maybe-print-list-and-error, $(license_modules_rest), \ |
| "Targets added under $(PRODUCT_OUT)/ unaccounted for notice handling.") |
| |
| # If we are building in a configuration that includes a prebuilt vendor.img, we can't |
| # update its notice file, so include those notices in the system partition instead |
| ifdef BOARD_PREBUILT_VENDORIMAGE |
| license_modules_system += $(license_modules_rehomed) |
| system_xml_directories := xml_excluded_vendor_product_odm_vendor_dlkm_odm_dlkm |
| system_notice_file_message := "Notices for files contained in all filesystem images except vendor/system_ext/product/odm/vendor_dlkm/odm_dlkm in this directory:" |
| else |
| license_modules_vendor += $(license_modules_rehomed) |
| system_xml_directories := xml_system |
| system_notice_file_message := "Notices for files contained in the system filesystem image in this directory:" |
| endif |
| |
| $(eval $(call combine-notice-files, $(system_xml_directories), \ |
| $(target_notice_file_txt), \ |
| $(target_notice_file_xml), \ |
| $(system_notice_file_message), \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_system), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_excluded_system_product_odm_vendor_dlkm_odm_dlkm, \ |
| $(target_vendor_notice_file_txt), \ |
| $(target_vendor_notice_file_xml), \ |
| "Notices for files contained in all filesystem images except system/system_ext/product/odm/vendor_dlkm/odm_dlkm in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_vendor), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_product, \ |
| $(target_product_notice_file_txt), \ |
| $(target_product_notice_file_xml), \ |
| "Notices for files contained in the product filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_product), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_system_ext, \ |
| $(target_system_ext_notice_file_txt), \ |
| $(target_system_ext_notice_file_xml), \ |
| "Notices for files contained in the system_ext filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_system_ext), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_odm, \ |
| $(target_odm_notice_file_txt), \ |
| $(target_odm_notice_file_xml), \ |
| "Notices for files contained in the odm filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_odm), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_vendor_dlkm, \ |
| $(target_vendor_dlkm_notice_file_txt), \ |
| $(target_vendor_dlkm_notice_file_xml), \ |
| "Notices for files contained in the vendor_dlkm filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_vendor_dlkm), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_odm_dlkm, \ |
| $(target_odm_dlkm_notice_file_txt), \ |
| $(target_odm_dlkm_notice_file_xml), \ |
| "Notices for files contained in the odm_dlkm filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_odm_dlkm), \ |
| $(exclude_target_dirs))) |
| |
| $(target_notice_file_xml_gz): $(target_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_vendor_notice_file_xml_gz): $(target_vendor_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_product_notice_file_xml_gz): $(target_product_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_system_ext_notice_file_xml_gz): $(target_system_ext_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_odm_notice_file_xml_gz): $(target_odm_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_vendor_dlkm_notice_file_xml_gz): $(target_vendor_dlkm_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_odm_dlkm_notice_file_xml_gz): $(target_odm_dlkm_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(installed_notice_html_or_xml_gz): $(target_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_vendor_notice_xml_gz): $(target_vendor_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_product_notice_xml_gz): $(target_product_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_system_ext_notice_xml_gz): $(target_system_ext_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_odm_notice_xml_gz): $(target_odm_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_vendor_dlkm_notice_xml_gz): $(target_vendor_dlkm_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_odm_dlkm_notice_xml_gz): $(target_odm_dlkm_notice_file_xml_gz) |
| $(copy-file-to-target) |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_or_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_vendor_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_product_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_system_ext_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_odm_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_vendor_dlkm_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_odm_dlkm_notice_xml_gz) |
| endif # PRODUCT_NOTICE_SPLIT |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_or_xml_gz) |
| |
| $(eval $(call combine-notice-files, html, \ |
| $(tools_notice_file_txt), \ |
| $(tools_notice_file_html), \ |
| "Notices for files contained in the tools directory:", \ |
| $(HOST_OUT_NOTICE_FILES), \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) \ |
| $(winpthreads_notice_file), \ |
| $(exclude_target_dirs))) |
| |
| endif # TARGET_BUILD_APPS |
| |
| # The kernel isn't really a module, so to get its module file in there, we |
| # make the target NOTICE files depend on this particular file too, which will |
| # then be in the right directory for the find in combine-notice-files to work. |
| $(eval $(call copy-one-file,$(BUILD_SYSTEM)/LINUX_KERNEL_COPYING,$(kernel_notice_file))) |
| |
| $(eval $(call copy-one-file,$(BUILD_SYSTEM)/WINPTHREADS_COPYING,$(winpthreads_notice_file))) |
| |
| |
| # ################################################################# |
| # Targets for user images |
| # ################################################################# |
| |
| INTERNAL_USERIMAGES_EXT_VARIANT := |
| ifeq ($(TARGET_USERIMAGES_USE_EXT2),true) |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext2 |
| else |
| ifeq ($(TARGET_USERIMAGES_USE_EXT3),true) |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext3 |
| else |
| ifeq ($(TARGET_USERIMAGES_USE_EXT4),true) |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext4 |
| endif |
| endif |
| endif |
| |
| # These options tell the recovery updater/installer how to mount the partitions writebale. |
| # <fstype>=<fstype_opts>[|<fstype_opts>]... |
| # fstype_opts := <opt>[,<opt>]... |
| # opt := <name>[=<value>] |
| # The following worked on Nexus devices with Kernel 3.1, 3.4, 3.10 |
| DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS := ext4=max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc |
| |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_EXT_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_EXT_FLAG := -s |
| endif |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_EROFS_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_EROFS_FLAG := -s |
| endif |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_SQUASHFS_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG := -s |
| endif |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_F2FS_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_F2FS_FLAG := -S |
| endif |
| |
| INTERNAL_USERIMAGES_DEPS := \ |
| $(BUILD_IMAGE) \ |
| $(MKE2FS_CONF) \ |
| $(MKEXTUSERIMG) |
| |
| ifeq ($(TARGET_USERIMAGES_USE_F2FS),true) |
| INTERNAL_USERIMAGES_DEPS += $(MKF2FSUSERIMG) |
| endif |
| |
| ifneq ($(filter \ |
| $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_VENDOR_DLKMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_ODM_DLKMIMAGE_FILE_SYSTEM_TYPE) \ |
| ,erofs),) |
| INTERNAL_USERIMAGES_DEPS += $(MKEROFSUSERIMG) |
| endif |
| |
| ifneq ($(filter \ |
| $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_VENDOR_DLKMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_ODM_DLKMIMAGE_FILE_SYSTEM_TYPE) \ |
| ,squashfs),) |
| INTERNAL_USERIMAGES_DEPS += $(MKSQUASHFSUSERIMG) |
| endif |
| |
| ifeq (true,$(PRODUCT_SUPPORTS_VERITY)) |
| INTERNAL_USERIMAGES_DEPS += $(BUILD_VERITY_METADATA) $(BUILD_VERITY_TREE) $(APPEND2SIMG) $(VERITY_SIGNER) |
| ifeq (true,$(PRODUCT_SUPPORTS_VERITY_FEC)) |
| INTERNAL_USERIMAGES_DEPS += $(FEC) |
| endif |
| endif |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| INTERNAL_USERIMAGES_DEPS += $(AVBTOOL) |
| endif |
| |
| # Get a colon-separated list of search paths. |
| INTERNAL_USERIMAGES_BINARY_PATHS := $(subst $(space),:,$(sort $(dir $(INTERNAL_USERIMAGES_DEPS)))) |
| |
| # Collects file_contexts files from modules to be installed |
| $(call merge-fc-files, \ |
| $(sort $(foreach m,$(product_MODULES),$(ALL_MODULES.$(m).FILE_CONTEXTS))),\ |
| $(call intermediates-dir-for,ETC,file_contexts.bin)/file_contexts.modules.tmp) |
| |
| SELINUX_FC := $(call intermediates-dir-for,ETC,file_contexts.bin)/file_contexts.bin |
| |
| INTERNAL_USERIMAGES_DEPS += $(SELINUX_FC) |
| |
| ifeq (true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)) |
| |
| ifeq ($(PRODUCT_SUPPORTS_VERITY),true) |
| $(error vboot 1.0 doesn't support logical partition) |
| endif |
| |
| endif # PRODUCT_USE_DYNAMIC_PARTITIONS |
| |
| # $(1): the path of the output dictionary file |
| # $(2): a subset of "system vendor cache userdata product system_ext oem odm vendor_dlkm odm_dlkm" |
| # $(3): additional "key=value" pairs to append to the dictionary file. |
| define generate-image-prop-dictionary |
| $(if $(filter $(2),system),\ |
| $(if $(BOARD_SYSTEMIMAGE_PARTITION_SIZE),$(hide) echo "system_size=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(INTERNAL_SYSTEM_OTHER_PARTITION_SIZE),$(hide) echo "system_other_size=$(INTERNAL_SYSTEM_OTHER_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "system_fs_type=$(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_COMPRESS),$(hide) echo "system_fs_compress=$(BOARD_SYSTEMIMAGE_FILE_SYSTEM_COMPRESS)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_F2FS_SLOAD_COMPRESS_FLAGS),$(hide) echo "system_f2fs_sldc_flags=$(BOARD_SYSTEMIMAGE_F2FS_SLOAD_COMPRESS_FLAGS)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "system_extfs_inode_count=$(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_EXTFS_RSV_PCT),$(hide) echo "system_extfs_rsv_pct=$(BOARD_SYSTEMIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_JOURNAL_SIZE),$(hide) echo "system_journal_size=$(BOARD_SYSTEMIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "system_squashfs_compressor=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "system_squashfs_compressor_opt=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "system_squashfs_block_size=$(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "system_squashfs_disable_4k_align=$(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_BASE_FS_PATH),$(hide) echo "system_base_fs_file=$(PRODUCT_SYSTEM_BASE_FS_PATH)" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_HEADROOM),$(hide) echo "system_headroom=$(PRODUCT_SYSTEM_HEADROOM)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "system_reserved_size=$(BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "system_selinux_fc=$(SELINUX_FC)" >> $(1) |
| $(hide) echo "building_system_image=$(BUILDING_SYSTEM_IMAGE)" >> $(1) |
| ) |
| $(if $(filter $(2),system_other),\ |
| $(hide) echo "building_system_other_image=$(BUILDING_SYSTEM_OTHER_IMAGE)" >> $(1) |
| ) |
| $(if $(filter $(2),userdata),\ |
| $(if $(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "userdata_fs_type=$(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_USERDATAIMAGE_PARTITION_SIZE),$(hide) echo "userdata_size=$(BOARD_USERDATAIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(PRODUCT_FS_CASEFOLD),$(hide) echo "needs_casefold=$(PRODUCT_FS_CASEFOLD)" >> $(1)) |
| $(if $(PRODUCT_QUOTA_PROJID),$(hide) echo "needs_projid=$(PRODUCT_QUOTA_PROJID)" >> $(1)) |
| $(if $(PRODUCT_FS_COMPRESSION),$(hide) echo "needs_compress=$(PRODUCT_FS_COMPRESSION)" >> $(1)) |
| $(hide) echo "userdata_selinux_fc=$(SELINUX_FC)" >> $(1) |
| $(hide) echo "building_userdata_image=$(BUILDING_USERDATA_IMAGE)" >> $(1) |
| ) |
| $(if $(filter $(2),cache),\ |
| $(if $(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "cache_fs_type=$(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_CACHEIMAGE_PARTITION_SIZE),$(hide) echo "cache_size=$(BOARD_CACHEIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(hide) echo "cache_selinux_fc=$(SELINUX_FC)" >> $(1) |
| $(hide) echo "building_cache_image=$(BUILDING_CACHE_IMAGE)" >> $(1) |
| ) |
| $(if $(filter $(2),vendor),\ |
| $(if $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "vendor_fs_type=$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT),$(hide) echo "vendor_extfs_inode_count=$(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_EXTFS_RSV_PCT),$(hide) echo "vendor_extfs_rsv_pct=$(BOARD_VENDORIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_PARTITION_SIZE),$(hide) echo "vendor_size=$(BOARD_VENDORIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_JOURNAL_SIZE),$(hide) echo "vendor_journal_size=$(BOARD_VENDORIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "vendor_squashfs_compressor=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "vendor_squashfs_compressor_opt=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "vendor_squashfs_block_size=$(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "vendor_squashfs_disable_4k_align=$(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(PRODUCT_VENDOR_BASE_FS_PATH),$(hide) echo "vendor_base_fs_file=$(PRODUCT_VENDOR_BASE_FS_PATH)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "vendor_reserved_size=$(BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "vendor_selinux_fc=$(SELINUX_FC)" >> $(1) |
| $(hide) echo "building_vendor_image=$(BUILDING_VENDOR_IMAGE)" >> $(1) |
| ) |
| $(if $(filter $(2),product),\ |
| $(if $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "product_fs_type=$(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT),$(hide) echo "product_extfs_inode_count=$(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_EXTFS_RSV_PCT),$(hide) echo "product_extfs_rsv_pct=$(BOARD_PRODUCTIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_PARTITION_SIZE),$(hide) echo "product_size=$(BOARD_PRODUCTIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_JOURNAL_SIZE),$(hide) echo "product_journal_size=$(BOARD_PRODUCTIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "product_squashfs_compressor=$(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "product_squashfs_compressor_opt=$(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "product_squashfs_block_size=$(BOARD_PRODUCTIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "product_squashfs_disable_4k_align=$(BOARD_PRODUCTIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(PRODUCT_PRODUCT_BASE_FS_PATH),$(hide) echo "product_base_fs_file=$(PRODUCT_PRODUCT_BASE_FS_PATH)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "product_reserved_size=$(BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "product_selinux_fc=$(SELINUX_FC)" >> $(1) |
| $(hide) echo "building_product_image=$(BUILDING_PRODUCT_IMAGE)" >> $(1) |
| ) |
| $(if $(filter $(2),system_ext),\ |
| $(if $(BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "system_ext_fs_type=$(BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_EXTFS_INODE_COUNT),$(hide) echo "system_ext_extfs_inode_count=$(BOARD_SYSTEM_EXTIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_EXTFS_RSV_PCT),$(hide) echo "system_ext_extfs_rsv_pct=$(BOARD_SYSTEM_EXTIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_PARTITION_SIZE),$(hide) echo "system_ext_size=$(BOARD_SYSTEM_EXTIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_JOURNAL_SIZE),$(hide) echo "system_ext_journal_size=$(BOARD_SYSTEM_EXTIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "system_ext_squashfs_compressor=$(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "system_ext_squashfs_compressor_opt=$(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "system_ext_squashfs_block_size=$(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "system_ext_squashfs_disable_4k_align=$(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "system_ext_reserved_size=$(BOARD_SYSTEM_EXTIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "system_ext_selinux_fc=$(SELINUX_FC)" >> $(1) |
| $(hide) echo "building_system_ext_image=$(BUILDING_SYSTEM_EXT_IMAGE)" >> $(1) |
| ) |
| $(if $(filter $(2),odm),\ |
| $(if $(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "odm_fs_type=$(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "odm_extfs_inode_count=$(BOARD_ODMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_EXTFS_RSV_PCT),$(hide) echo "odm_extfs_rsv_pct=$(BOARD_ODMIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_PARTITION_SIZE),$(hide) echo "odm_size=$(BOARD_ODMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_JOURNAL_SIZE),$(hide) echo "odm_journal_size=$(BOARD_ODMIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "odm_squashfs_compressor=$(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "odm_squashfs_compressor_opt=$(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "odm_squashfs_block_size=$(BOARD_ODMIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "odm_squashfs_disable_4k_align=$(BOARD_ODMIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(PRODUCT_ODM_BASE_FS_PATH),$(hide) echo "odm_base_fs_file=$(PRODUCT_ODM_BASE_FS_PATH)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "odm_reserved_size=$(BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "odm_selinux_fc=$(SELINUX_FC)" >> $(1) |
| $(hide) echo "building_odm_image=$(BUILDING_ODM_IMAGE)" >> $(1) |
| ) |
| $(if $(filter $(2),vendor_dlkm),\ |
| $(if $(BOARD_VENDOR_DLKMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "vendor_dlkm_fs_type=$(BOARD_VENDOR_DLKMIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_VENDOR_DLKMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "vendor_dlkm_extfs_inode_count=$(BOARD_VENDOR_DLKMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_VENDOR_DLKMIMAGE_EXTFS_RSV_PCT),$(hide) echo "vendor_dlkm_extfs_rsv_pct=$(BOARD_VENDOR_DLKMIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_VENDOR_DLKMIMAGE_PARTITION_SIZE),$(hide) echo "vendor_dlkm_size=$(BOARD_VENDOR_DLKMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDOR_DLKMIMAGE_JOURNAL_SIZE),$(hide) echo "vendor_dlkm_journal_size=$(BOARD_VENDOR_DLKMIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDOR_DLKMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "vendor_dlkm_squashfs_compressor=$(BOARD_VENDOR_DLKMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_VENDOR_DLKMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "vendor_dlkm_squashfs_compressor_opt=$(BOARD_VENDOR_DLKMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_VENDOR_DLKMIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "vendor_dlkm_squashfs_block_size=$(BOARD_VENDOR_DLKMIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDOR_DLKMIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "vendor_dlkm_squashfs_disable_4k_align=$(BOARD_VENDOR_DLKMIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(BOARD_VENDOR_DLKMIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "vendor_dlkm_reserved_size=$(BOARD_VENDOR_DLKMIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "vendor_dlkm_selinux_fc=$(SELINUX_FC)" >> $(1) |
| $(hide) echo "building_vendor_dlkm_image=$(BUILDING_VENDOR_DLKM_IMAGE)" >> $(1) |
| ) |
| $(if $(filter $(2),odm_dlkm),\ |
| $(if $(BOARD_ODM_DLKMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "odm_dlkm_fs_type=$(BOARD_ODM_DLKMIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_ODM_DLKMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "odm_dlkm_extfs_inode_count=$(BOARD_ODM_DLKMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_ODM_DLKMIMAGE_EXTFS_RSV_PCT),$(hide) echo "odm_dlkm_extfs_rsv_pct=$(BOARD_ODM_DLKMIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_ODM_DLKMIMAGE_PARTITION_SIZE),$(hide) echo "odm_dlkm_size=$(BOARD_ODM_DLKMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_ODM_DLKMIMAGE_JOURNAL_SIZE),$(hide) echo "odm_dlkm_journal_size=$(BOARD_ODM_DLKMIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_ODM_DLKMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "odm_dlkm_squashfs_compressor=$(BOARD_ODM_DLKMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_ODM_DLKMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "odm_dlkm_squashfs_compressor_opt=$(BOARD_ODM_DLKMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_ODM_DLKMIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "odm_dlkm_squashfs_block_size=$(BOARD_ODM_DLKMIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_ODM_DLKMIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "odm_dlkm_squashfs_disable_4k_align=$(BOARD_ODM_DLKMIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(BOARD_ODM_DLKMIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "odm_dlkm_reserved_size=$(BOARD_ODM_DLKMIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "odm_dlkm_selinux_fc=$(SELINUX_FC)" >> $(1) |
| $(hide) echo "building_odm_dlkm_image=$(BUILDING_ODM_DLKM_IMAGE)" >> $(1) |
| ) |
| $(if $(filter $(2),oem),\ |
| $(if $(BOARD_OEMIMAGE_PARTITION_SIZE),$(hide) echo "oem_size=$(BOARD_OEMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_JOURNAL_SIZE),$(hide) echo "oem_journal_size=$(BOARD_OEMIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "oem_extfs_inode_count=$(BOARD_OEMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_EXTFS_RSV_PCT),$(hide) echo "oem_extfs_rsv_pct=$(BOARD_OEMIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(hide) echo "oem_selinux_fc=$(SELINUX_FC)" >> $(1) |
| ) |
| $(hide) echo "ext_mkuserimg=$(notdir $(MKEXTUSERIMG))" >> $(1) |
| |
| $(if $(INTERNAL_USERIMAGES_EXT_VARIANT),$(hide) echo "fs_type=$(INTERNAL_USERIMAGES_EXT_VARIANT)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG),$(hide) echo "extfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_EROFS_FLAG),$(hide) echo "erofs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EROFS_FLAG)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG),$(hide) echo "squashfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_F2FS_FLAG),$(hide) echo "f2fs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_F2FS_FLAG)" >> $(1)) |
| $(if $(BOARD_EXT4_SHARE_DUP_BLOCKS),$(hide) echo "ext4_share_dup_blocks=$(BOARD_EXT4_SHARE_DUP_BLOCKS)" >> $(1)) |
| $(if $(BOARD_FLASH_LOGICAL_BLOCK_SIZE), $(hide) echo "flash_logical_block_size=$(BOARD_FLASH_LOGICAL_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_FLASH_ERASE_BLOCK_SIZE), $(hide) echo "flash_erase_block_size=$(BOARD_FLASH_ERASE_BLOCK_SIZE)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_BOOT_SIGNER),$(hide) echo "boot_signer=$(PRODUCT_SUPPORTS_BOOT_SIGNER)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity=$(PRODUCT_SUPPORTS_VERITY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_key=$(PRODUCT_VERITY_SIGNING_KEY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_signer_cmd=$(notdir $(VERITY_SIGNER))" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY_FEC),$(hide) echo "verity_fec=$(PRODUCT_SUPPORTS_VERITY_FEC)" >> $(1)) |
| $(if $(filter eng, $(TARGET_BUILD_VARIANT)),$(hide) echo "verity_disable=true" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_VERITY_PARTITION),$(hide) echo "system_verity_block_device=$(PRODUCT_SYSTEM_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_VENDOR_VERITY_PARTITION),$(hide) echo "vendor_verity_block_device=$(PRODUCT_VENDOR_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_PRODUCT_VERITY_PARTITION),$(hide) echo "product_verity_block_device=$(PRODUCT_PRODUCT_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_EXT_VERITY_PARTITION),$(hide) echo "system_ext_verity_block_device=$(PRODUCT_SYSTEM_EXT_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_VENDOR_DLKM_VERITY_PARTITION),$(hide) echo "vendor_dlkm_verity_block_device=$(PRODUCT_VENDOR_DLKM_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_ODM_DLKM_VERITY_PARTITION),$(hide) echo "odm_dlkm_verity_block_device=$(PRODUCT_ODM_DLKM_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot=$(PRODUCT_SUPPORTS_VBOOT)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_key=$(PRODUCT_VBOOT_SIGNING_KEY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_subkey=$(PRODUCT_VBOOT_SIGNING_SUBKEY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "futility=$(notdir $(FUTILITY))" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_signer_cmd=$(VBOOT_SIGNER)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_avbtool=$(notdir $(AVBTOOL))" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_SYSTEM_KEY_PATH),\ |
| $(hide) echo "avb_system_key_path=$(BOARD_AVB_SYSTEM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_system_algorithm=$(BOARD_AVB_SYSTEM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_system_rollback_index_location=$(BOARD_AVB_SYSTEM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_other_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_other_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_OTHER_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_SYSTEM_OTHER_KEY_PATH),\ |
| $(hide) echo "avb_system_other_key_path=$(BOARD_AVB_SYSTEM_OTHER_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_system_other_algorithm=$(BOARD_AVB_SYSTEM_OTHER_ALGORITHM)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_add_hashtree_footer_args=$(BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_VENDOR_KEY_PATH),\ |
| $(hide) echo "avb_vendor_key_path=$(BOARD_AVB_VENDOR_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_vendor_algorithm=$(BOARD_AVB_VENDOR_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_vendor_rollback_index_location=$(BOARD_AVB_VENDOR_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_product_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_product_add_hashtree_footer_args=$(BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_PRODUCT_KEY_PATH),\ |
| $(hide) echo "avb_product_key_path=$(BOARD_AVB_PRODUCT_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_product_algorithm=$(BOARD_AVB_PRODUCT_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_product_rollback_index_location=$(BOARD_AVB_PRODUCT_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_ext_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(hide) echo "avb_system_ext_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_EXT_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_SYSTEM_EXT_KEY_PATH),\ |
| $(hide) echo "avb_system_ext_key_path=$(BOARD_AVB_SYSTEM_EXT_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_system_ext_algorithm=$(BOARD_AVB_SYSTEM_EXT_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_system_ext_rollback_index_location=$(BOARD_AVB_SYSTEM_EXT_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_odm_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_odm_add_hashtree_footer_args=$(BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_ODM_KEY_PATH),\ |
| $(hide) echo "avb_odm_key_path=$(BOARD_AVB_ODM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_odm_algorithm=$(BOARD_AVB_ODM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_odm_rollback_index_location=$(BOARD_AVB_ODM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_dlkm_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(hide) echo "avb_vendor_dlkm_add_hashtree_footer_args=$(BOARD_AVB_VENDOR_DLKM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_VENDOR_DLKM_KEY_PATH),\ |
| $(hide) echo "avb_vendor_dlkm_key_path=$(BOARD_AVB_VENDOR_DLKM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_vendor_dlkm_algorithm=$(BOARD_AVB_VENDOR_DLKM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_vendor_dlkm_rollback_index_location=$(BOARD_AVB_VENDOR_DLKM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_odm_dlkm_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(hide) echo "avb_odm_dlkm_add_hashtree_footer_args=$(BOARD_AVB_ODM_DLKM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_ODM_DLKM_KEY_PATH),\ |
| $(hide) echo "avb_odm_dlkm_key_path=$(BOARD_AVB_ODM_DLKM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_odm_dlkm_algorithm=$(BOARD_AVB_ODM_DLKM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_odm_dlkm_rollback_index_location=$(BOARD_AVB_ODM_DLKM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ |
| $(hide) echo "recovery_as_boot=true" >> $(1)) |
| $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)),\ |
| $(hide) echo "system_root_image=true" >> $(1)) |
| $(hide) echo "root_dir=$(TARGET_ROOT_OUT)" >> $(1) |
| $(if $(filter true,$(PRODUCT_USE_DYNAMIC_PARTITION_SIZE)),\ |
| $(hide) echo "use_dynamic_partition_size=true" >> $(1)) |
| $(if $(3),$(hide) $(foreach kv,$(3),echo "$(kv)" >> $(1);)) |
| endef |
| |
| # $(1): the path of the output dictionary file |
| # $(2): additional "key=value" pairs to append to the dictionary file. |
| PROP_DICTIONARY_IMAGES := oem |
| ifdef BUILDING_CACHE_IMAGE |
| PROP_DICTIONARY_IMAGES += cache |
| endif |
| ifdef BUILDING_SYSTEM_IMAGE |
| PROP_DICTIONARY_IMAGES += system |
| endif |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| PROP_DICTIONARY_IMAGES += system_other |
| endif |
| ifdef BUILDING_USERDATA_IMAGE |
| PROP_DICTIONARY_IMAGES += userdata |
| endif |
| ifdef BUILDING_VENDOR_IMAGE |
| PROP_DICTIONARY_IMAGES += vendor |
| endif |
| ifdef BUILDING_PRODUCT_IMAGE |
| PROP_DICTIONARY_IMAGES += product |
| endif |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| PROP_DICTIONARY_IMAGES += system_ext |
| endif |
| ifdef BUILDING_ODM_IMAGE |
| PROP_DICTIONARY_IMAGES += odm |
| endif |
| ifdef BUILDING_VENDOR_DLKM_IMAGE |
| PROP_DICTIONARY_IMAGES += vendor_dlkm |
| endif |
| ifdef BUILDING_ODM_DLKM_IMAGE |
| PROP_DICTIONARY_IMAGES += odm_dlkm |
| endif |
| define generate-userimage-prop-dictionary |
| $(call generate-image-prop-dictionary,$(1),$(PROP_DICTIONARY_IMAGES),$(2)) |
| endef |
| |
| # $(1): the path of the input dictionary file, where each line has the format key=value |
| # $(2): the key to look up |
| define read-image-prop-dictionary |
| $$(grep '$(2)=' $(1) | cut -f2- -d'=') |
| endef |
| |
| # ----------------------------------------------------------------- |
| # Recovery image |
| |
| # Recovery image exists if we are building recovery, or building recovery as boot. |
| ifdef BUILDING_RECOVERY_IMAGE |
| |
| INTERNAL_RECOVERYIMAGE_FILES := $(filter $(TARGET_RECOVERY_OUT)/%, \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_RECOVERY := $(PRODUCT_OUT)/installed-files-recovery.txt |
| INSTALLED_FILES_JSON_RECOVERY := $(INSTALLED_FILES_FILE_RECOVERY:.txt=.json) |
| |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| INSTALLED_BOOTIMAGE_TARGET := $(BUILT_BOOTIMAGE_TARGET) |
| endif |
| |
| # TODO(b/30414428): Can't depend on INTERNAL_RECOVERYIMAGE_FILES alone like other |
| # INSTALLED_FILES_FILE_* rules. Because currently there're cp/rsync/rm commands in |
| # build-recoveryimage-target, which would touch the files under TARGET_RECOVERY_OUT and race with |
| # the call to FILELIST. |
| $(INSTALLED_FILES_FILE_RECOVERY): $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP) |
| |
| $(INSTALLED_FILES_FILE_RECOVERY): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_RECOVERY) |
| $(INSTALLED_FILES_FILE_RECOVERY): $(INTERNAL_RECOVERYIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_RECOVERY_ROOT_OUT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| recovery_sepolicy := \ |
| $(TARGET_RECOVERY_ROOT_OUT)/sepolicy \ |
| $(TARGET_RECOVERY_ROOT_OUT)/plat_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/plat_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/system_ext_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/system_ext_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/vendor_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/vendor_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/odm_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/odm_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/product_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/product_property_contexts |
| |
| # Passed into rsync from non-recovery root to recovery root, to avoid overwriting recovery-specific |
| # SELinux files |
| IGNORE_RECOVERY_SEPOLICY := $(patsubst $(TARGET_RECOVERY_OUT)/%,--exclude=/%,$(recovery_sepolicy)) |
| |
| # if building multiple boot images from multiple kernels, use the first kernel listed |
| # for the recovery image |
| recovery_kernel := $(firstword $(INSTALLED_KERNEL_TARGET)) |
| recovery_ramdisk := $(PRODUCT_OUT)/ramdisk-recovery.img |
| recovery_resources_common := bootable/recovery/res |
| |
| # Set recovery_density to a density bucket based on TARGET_SCREEN_DENSITY, PRODUCT_AAPT_PREF_CONFIG, |
| # or mdpi, in order of preference. We support both specific buckets (e.g. xdpi) and numbers, |
| # which get remapped to a bucket. |
| recovery_density := $(or $(TARGET_SCREEN_DENSITY),$(PRODUCT_AAPT_PREF_CONFIG),mdpi) |
| ifeq (,$(filter xxxhdpi xxhdpi xhdpi hdpi mdpi,$(recovery_density))) |
| recovery_density_value := $(patsubst %dpi,%,$(recovery_density)) |
| # We roughly use the medium point between the primary densities to split buckets. |
| # ------160------240------320----------480------------640------ |
| # mdpi hdpi xhdpi xxhdpi xxxhdpi |
| recovery_density := $(strip \ |
| $(or $(if $(filter $(shell echo $$(($(recovery_density_value) >= 560))),1),xxxhdpi),\ |
| $(if $(filter $(shell echo $$(($(recovery_density_value) >= 400))),1),xxhdpi),\ |
| $(if $(filter $(shell echo $$(($(recovery_density_value) >= 280))),1),xhdpi),\ |
| $(if $(filter $(shell echo $$(($(recovery_density_value) >= 200))),1),hdpi,mdpi))) |
| endif |
| |
| ifneq (,$(wildcard $(recovery_resources_common)-$(recovery_density))) |
| recovery_resources_common := $(recovery_resources_common)-$(recovery_density) |
| else |
| recovery_resources_common := $(recovery_resources_common)-xhdpi |
| endif |
| |
| # Select the 18x32 font on high-density devices (xhdpi and up); and the 12x22 font on other devices. |
| # Note that the font selected here can be overridden for a particular device by putting a font.png |
| # in its private recovery resources. |
| ifneq (,$(filter xxxhdpi xxhdpi xhdpi,$(recovery_density))) |
| recovery_font := bootable/recovery/fonts/18x32.png |
| else |
| recovery_font := bootable/recovery/fonts/12x22.png |
| endif |
| |
| |
| # We will only generate the recovery background text images if the variable |
| # TARGET_RECOVERY_UI_SCREEN_WIDTH is defined. For devices with xxxhdpi and xxhdpi, we set the |
| # variable to the commonly used values here, if it hasn't been intialized elsewhere. While for |
| # devices with lower density, they must have TARGET_RECOVERY_UI_SCREEN_WIDTH defined in their |
| # BoardConfig in order to use this feature. |
| ifeq ($(recovery_density),xxxhdpi) |
| TARGET_RECOVERY_UI_SCREEN_WIDTH ?= 1440 |
| else ifeq ($(recovery_density),xxhdpi) |
| TARGET_RECOVERY_UI_SCREEN_WIDTH ?= 1080 |
| endif |
| |
| ifneq ($(TARGET_RECOVERY_UI_SCREEN_WIDTH),) |
| # Subtracts the margin width and menu indent from the screen width; it's safe to be conservative. |
| ifeq ($(TARGET_RECOVERY_UI_MARGIN_WIDTH),) |
| recovery_image_width := $$(($(TARGET_RECOVERY_UI_SCREEN_WIDTH) - 10)) |
| else |
| recovery_image_width := $$(($(TARGET_RECOVERY_UI_SCREEN_WIDTH) - $(TARGET_RECOVERY_UI_MARGIN_WIDTH) - 10)) |
| endif |
| |
| |
| RECOVERY_INSTALLING_TEXT_FILE := $(call intermediates-dir-for,ETC,recovery_text_res)/installing_text.png |
| RECOVERY_INSTALLING_SECURITY_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/installing_security_text.png |
| RECOVERY_ERASING_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/erasing_text.png |
| RECOVERY_ERROR_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/error_text.png |
| RECOVERY_NO_COMMAND_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/no_command_text.png |
| |
| RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/cancel_wipe_data_text.png |
| RECOVERY_FACTORY_DATA_RESET_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/factory_data_reset_text.png |
| RECOVERY_TRY_AGAIN_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/try_again_text.png |
| RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/wipe_data_confirmation_text.png |
| RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/wipe_data_menu_header_text.png |
| |
| generated_recovery_text_files := \ |
| $(RECOVERY_INSTALLING_TEXT_FILE) \ |
| $(RECOVERY_INSTALLING_SECURITY_TEXT_FILE) \ |
| $(RECOVERY_ERASING_TEXT_FILE) \ |
| $(RECOVERY_ERROR_TEXT_FILE) \ |
| $(RECOVERY_NO_COMMAND_TEXT_FILE) \ |
| $(RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE) \ |
| $(RECOVERY_FACTORY_DATA_RESET_TEXT_FILE) \ |
| $(RECOVERY_TRY_AGAIN_TEXT_FILE) \ |
| $(RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE) \ |
| $(RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE) |
| |
| resource_dir := bootable/recovery/tools/recovery_l10n/res/ |
| resource_dir_deps := $(sort $(shell find $(resource_dir) -name *.xml -not -name .*)) |
| image_generator_jar := $(HOST_OUT_JAVA_LIBRARIES)/RecoveryImageGenerator.jar |
| zopflipng := $(HOST_OUT_EXECUTABLES)/zopflipng |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_SOURCE_FONTS := $(recovery_noto-fonts_dep) $(recovery_roboto-fonts_dep) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_FONT_FILES_DIR := $(call intermediates-dir-for,ETC,recovery_font_files) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RESOURCE_DIR := $(resource_dir) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_IMAGE_GENERATOR_JAR := $(image_generator_jar) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_ZOPFLIPNG := $(zopflipng) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_IMAGE_WIDTH := $(recovery_image_width) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST := \ |
| recovery_installing \ |
| recovery_installing_security \ |
| recovery_erasing \ |
| recovery_error \ |
| recovery_no_command |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_WIPE_DATA_TEXT_LIST := \ |
| recovery_cancel_wipe_data \ |
| recovery_factory_data_reset \ |
| recovery_try_again \ |
| recovery_wipe_data_menu_header \ |
| recovery_wipe_data_confirmation |
| $(RECOVERY_INSTALLING_TEXT_FILE): .KATI_IMPLICIT_OUTPUTS := $(filter-out $(RECOVERY_INSTALLING_TEXT_FILE),$(generated_recovery_text_files)) |
| $(RECOVERY_INSTALLING_TEXT_FILE): $(image_generator_jar) $(resource_dir_deps) $(recovery_noto-fonts_dep) $(recovery_roboto-fonts_dep) $(zopflipng) |
| # Prepares the font directory. |
| @rm -rf $(PRIVATE_RECOVERY_FONT_FILES_DIR) |
| @mkdir -p $(PRIVATE_RECOVERY_FONT_FILES_DIR) |
| $(foreach filename,$(PRIVATE_SOURCE_FONTS), cp $(filename) $(PRIVATE_RECOVERY_FONT_FILES_DIR) &&) true |
| @rm -rf $(dir $@) |
| @mkdir -p $(dir $@) |
| $(foreach text_name,$(PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST) $(PRIVATE_RECOVERY_WIPE_DATA_TEXT_LIST), \ |
| $(eval output_file := $(dir $@)/$(patsubst recovery_%,%_text.png,$(text_name))) \ |
| $(eval center_alignment := $(if $(filter $(text_name),$(PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST)), --center_alignment)) \ |
| java -jar $(PRIVATE_IMAGE_GENERATOR_JAR) \ |
| --image_width $(PRIVATE_RECOVERY_IMAGE_WIDTH) \ |
| --text_name $(text_name) \ |
| --font_dir $(PRIVATE_RECOVERY_FONT_FILES_DIR) \ |
| --resource_dir $(PRIVATE_RESOURCE_DIR) \ |
| --output_file $(output_file) $(center_alignment) && \ |
| $(PRIVATE_ZOPFLIPNG) -y --iterations=1 --filters=0 $(output_file) $(output_file) > /dev/null &&) true |
| else |
| RECOVERY_INSTALLING_TEXT_FILE := |
| RECOVERY_INSTALLING_SECURITY_TEXT_FILE := |
| RECOVERY_ERASING_TEXT_FILE := |
| RECOVERY_ERROR_TEXT_FILE := |
| RECOVERY_NO_COMMAND_TEXT_FILE := |
| RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE := |
| RECOVERY_FACTORY_DATA_RESET_TEXT_FILE := |
| RECOVERY_TRY_AGAIN_TEXT_FILE := |
| RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE := |
| RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE := |
| endif # TARGET_RECOVERY_UI_SCREEN_WIDTH |
| |
| ifndef TARGET_PRIVATE_RES_DIRS |
| TARGET_PRIVATE_RES_DIRS := $(wildcard $(TARGET_DEVICE_DIR)/recovery/res) |
| endif |
| recovery_resource_deps := $(shell find $(recovery_resources_common) \ |
| $(TARGET_PRIVATE_RES_DIRS) -type f) |
| recovery_resource_deps += $(generated_recovery_text_files) |
| |
| |
| ifdef TARGET_RECOVERY_FSTAB |
| recovery_fstab := $(TARGET_RECOVERY_FSTAB) |
| else |
| recovery_fstab := $(strip $(wildcard $(TARGET_DEVICE_DIR)/recovery.fstab)) |
| endif |
| ifdef TARGET_RECOVERY_WIPE |
| recovery_wipe := $(TARGET_RECOVERY_WIPE) |
| else |
| recovery_wipe := |
| endif |
| |
| # Traditionally with non-A/B OTA we have: |
| # boot.img + recovery-from-boot.p + recovery-resource.dat = recovery.img. |
| # recovery-resource.dat is needed only if we carry an imgdiff patch of the boot and recovery images |
| # and invoke install-recovery.sh on the first boot post an OTA update. |
| # |
| # We no longer need that if one of the following conditions holds: |
| # a) We carry a full copy of the recovery image - no patching needed |
| # (BOARD_USES_FULL_RECOVERY_IMAGE = true); |
| # b) We build a single image that contains boot and recovery both - no recovery image to install |
| # (BOARD_USES_RECOVERY_AS_BOOT = true); |
| # c) We mount the system image as / and therefore do not have a ramdisk in boot.img |
| # (BOARD_BUILD_SYSTEM_ROOT_IMAGE = true). |
| # d) We include the recovery DTBO image within recovery - not needing the resource file as we |
| # do bsdiff because boot and recovery will contain different number of entries |
| # (BOARD_INCLUDE_RECOVERY_DTBO = true). |
| # e) We include the recovery ACPIO image within recovery - not needing the resource file as we |
| # do bsdiff because boot and recovery will contain different number of entries |
| # (BOARD_INCLUDE_RECOVERY_ACPIO = true). |
| # f) We build a single image that contains vendor_boot and recovery both - no recovery image to |
| # install |
| # (BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT = true). |
| |
| ifeq (,$(filter true, $(BOARD_USES_FULL_RECOVERY_IMAGE) $(BOARD_USES_RECOVERY_AS_BOOT) \ |
| $(BOARD_BUILD_SYSTEM_ROOT_IMAGE) $(BOARD_INCLUDE_RECOVERY_DTBO) $(BOARD_INCLUDE_RECOVERY_ACPIO) \ |
| $(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT))) |
| # Named '.dat' so we don't attempt to use imgdiff for patching it. |
| RECOVERY_RESOURCE_ZIP := $(TARGET_OUT_VENDOR)/etc/recovery-resource.dat |
| ALL_DEFAULT_INSTALLED_MODULES += $(RECOVERY_RESOURCE_ZIP) |
| else |
| RECOVERY_RESOURCE_ZIP := |
| endif |
| |
| INSTALLED_RECOVERY_BUILD_PROP_TARGET := $(TARGET_RECOVERY_ROOT_OUT)/prop.default |
| |
| $(INSTALLED_RECOVERY_BUILD_PROP_TARGET): PRIVATE_RECOVERY_UI_PROPERTIES := \ |
| TARGET_RECOVERY_UI_ANIMATION_FPS:animation_fps \ |
| TARGET_RECOVERY_UI_MARGIN_HEIGHT:margin_height \ |
| TARGET_RECOVERY_UI_MARGIN_WIDTH:margin_width \ |
| TARGET_RECOVERY_UI_MENU_UNUSABLE_ROWS:menu_unusable_rows \ |
| TARGET_RECOVERY_UI_PROGRESS_BAR_BASELINE:progress_bar_baseline \ |
| TARGET_RECOVERY_UI_TOUCH_LOW_THRESHOLD:touch_low_threshold \ |
| TARGET_RECOVERY_UI_TOUCH_HIGH_THRESHOLD:touch_high_threshold \ |
| TARGET_RECOVERY_UI_VR_STEREO_OFFSET:vr_stereo_offset |
| |
| # Parses the given list of build variables and writes their values as build properties if defined. |
| # For example, if a target defines `TARGET_RECOVERY_UI_MARGIN_HEIGHT := 100`, |
| # `ro.recovery.ui.margin_height=100` will be appended to the given output file. |
| # $(1): Map from the build variable names to property names |
| # $(2): Output file |
| define append-recovery-ui-properties |
| echo "#" >> $(2) |
| echo "# RECOVERY UI BUILD PROPERTIES" >> $(2) |
| echo "#" >> $(2) |
| $(foreach prop,$(1), \ |
| $(eval _varname := $(call word-colon,1,$(prop))) \ |
| $(eval _propname := $(call word-colon,2,$(prop))) \ |
| $(eval _value := $($(_varname))) \ |
| $(if $(_value), \ |
| echo ro.recovery.ui.$(_propname)=$(_value) >> $(2) &&)) true |
| endef |
| |
| $(INSTALLED_RECOVERY_BUILD_PROP_TARGET): \ |
| $(INSTALLED_BUILD_PROP_TARGET) \ |
| $(INSTALLED_VENDOR_BUILD_PROP_TARGET) \ |
| $(INSTALLED_ODM_BUILD_PROP_TARGET) \ |
| $(INSTALLED_PRODUCT_BUILD_PROP_TARGET) \ |
| $(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET) |
| @echo "Target recovery buildinfo: $@" |
| $(hide) mkdir -p $(dir $@) |
| $(hide) rm -f $@ |
| $(hide) cat $(INSTALLED_BUILD_PROP_TARGET) >> $@ |
| $(hide) cat $(INSTALLED_VENDOR_BUILD_PROP_TARGET) >> $@ |
| $(hide) cat $(INSTALLED_ODM_BUILD_PROP_TARGET) >> $@ |
| $(hide) cat $(INSTALLED_PRODUCT_BUILD_PROP_TARGET) >> $@ |
| $(hide) cat $(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET) >> $@ |
| $(call append-recovery-ui-properties,$(PRIVATE_RECOVERY_UI_PROPERTIES),$@) |
| |
| # Only install boot/etc/build.prop to recovery image on recovery_as_boot. |
| # On device with dedicated recovery partition, the file should come from the boot |
| # ramdisk. |
| ifeq (true,$(BOARD_USES_RECOVERY_AS_BOOT)) |
| INSTALLED_RECOVERY_RAMDISK_BUILD_PROP_TARGET := $(TARGET_RECOVERY_ROOT_OUT)/$(RAMDISK_BUILD_PROP_REL_PATH) |
| $(INSTALLED_RECOVERY_RAMDISK_BUILD_PROP_TARGET): $(INSTALLED_RAMDISK_BUILD_PROP_TARGET) |
| $(copy-file-to-target) |
| endif |
| |
| INTERNAL_RECOVERYIMAGE_ARGS := --ramdisk $(recovery_ramdisk) |
| |
| ifneq (truetrue,$(strip $(BUILDING_VENDOR_BOOT_IMAGE))$(strip $(BOARD_USES_RECOVERY_AS_BOOT))) |
| INTERNAL_RECOVERYIMAGE_ARGS += $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) |
| # Assumes this has already been stripped |
| ifneq (true,$(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE)) |
| ifdef INTERNAL_KERNEL_CMDLINE |
| INTERNAL_RECOVERYIMAGE_ARGS += --cmdline "$(INTERNAL_KERNEL_CMDLINE)" |
| endif # INTERNAL_KERNEL_CMDLINE != "" |
| endif # BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE != true |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_RECOVERYIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_RECOVERYIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_PREBUILT_RECOVERY_DTBOIMAGE |
| INTERNAL_RECOVERYIMAGE_ARGS += --recovery_dtbo $(BOARD_PREBUILT_RECOVERY_DTBOIMAGE) |
| else |
| INTERNAL_RECOVERYIMAGE_ARGS += --recovery_dtbo $(BOARD_PREBUILT_DTBOIMAGE) |
| endif |
| endif # BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_INCLUDE_RECOVERY_ACPIO |
| INTERNAL_RECOVERYIMAGE_ARGS += --recovery_acpio $(BOARD_RECOVERY_ACPIO) |
| endif |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INTERNAL_RECOVERYIMAGE_ARGS += --dtb $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| endif # (BUILDING_VENDOR_BOOT_IMAGE and BOARD_USES_RECOVERY_AS_BOOT) |
| ifndef BOARD_RECOVERY_MKBOOTIMG_ARGS |
| BOARD_RECOVERY_MKBOOTIMG_ARGS := $(BOARD_MKBOOTIMG_ARGS) |
| endif |
| |
| $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP): $(MKBOOTFS) $(COMPRESSION_COMMAND_DEPS) \ |
| $(INTERNAL_ROOT_FILES) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INTERNAL_RECOVERYIMAGE_FILES) \ |
| $(recovery_sepolicy) \ |
| $(INSTALLED_2NDBOOTLOADER_TARGET) \ |
| $(INSTALLED_RECOVERY_BUILD_PROP_TARGET) \ |
| $(INSTALLED_RECOVERY_RAMDISK_BUILD_PROP_TARGET) \ |
| $(recovery_resource_deps) \ |
| $(recovery_fstab) |
| # Making recovery image |
| mkdir -p $(TARGET_RECOVERY_OUT) |
| mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/sdcard $(TARGET_RECOVERY_ROOT_OUT)/tmp |
| # Copying baseline ramdisk... |
| # Use rsync because "cp -Rf" fails to overwrite broken symlinks on Mac. |
| rsync -a --exclude=sdcard $(IGNORE_RECOVERY_SEPOLICY) $(IGNORE_CACHE_LINK) $(TARGET_ROOT_OUT) $(TARGET_RECOVERY_OUT) |
| # Modifying ramdisk contents... |
| $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)),, \ |
| ln -sf /system/bin/init $(TARGET_RECOVERY_ROOT_OUT)/init) |
| # Removes $(TARGET_RECOVERY_ROOT_OUT)/init*.rc EXCEPT init.recovery*.rc. |
| find $(TARGET_RECOVERY_ROOT_OUT) -maxdepth 1 -name 'init*.rc' -type f -not -name "init.recovery.*.rc" | xargs rm -f |
| cp $(TARGET_ROOT_OUT)/init.recovery.*.rc $(TARGET_RECOVERY_ROOT_OUT)/ 2> /dev/null || true # Ignore error when the src file doesn't exist. |
| mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/res |
| rm -rf $(TARGET_RECOVERY_ROOT_OUT)/res/* |
| cp -rf $(recovery_resources_common)/* $(TARGET_RECOVERY_ROOT_OUT)/res |
| $(foreach recovery_text_file,$(generated_recovery_text_files), \ |
| cp -rf $(recovery_text_file) $(TARGET_RECOVERY_ROOT_OUT)/res/images/ &&) true |
| cp -f $(recovery_font) $(TARGET_RECOVERY_ROOT_OUT)/res/images/font.png |
| $(foreach item,$(TARGET_PRIVATE_RES_DIRS), \ |
| cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/$(newline)) |
| $(foreach item,$(recovery_fstab), \ |
| cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/recovery.fstab) |
| $(if $(strip $(recovery_wipe)), \ |
| cp -f $(recovery_wipe) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/recovery.wipe) |
| ln -sf prop.default $(TARGET_RECOVERY_ROOT_OUT)/default.prop |
| $(BOARD_RECOVERY_IMAGE_PREPARE) |
| $(hide) touch $@ |
| |
| $(recovery_ramdisk): $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RECOVERY_ROOT_OUT) | $(COMPRESSION_COMMAND) > $(recovery_ramdisk) |
| |
| # $(1): output file |
| # $(2): optional kernel file |
| define build-recoveryimage-target |
| $(if $(filter true,$(PRODUCT_SUPPORTS_VBOOT)), \ |
| $(MKBOOTIMG) $(if $(strip $(2)),--kernel $(strip $(2))) $(INTERNAL_RECOVERYIMAGE_ARGS) \ |
| $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_RECOVERY_MKBOOTIMG_ARGS) \ |
| --output $(1).unsigned, \ |
| $(MKBOOTIMG) $(if $(strip $(2)),--kernel $(strip $(2))) $(INTERNAL_RECOVERYIMAGE_ARGS) \ |
| $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_RECOVERY_MKBOOTIMG_ARGS) \ |
| --output $(1)) |
| $(if $(filter true,$(PRODUCT_SUPPORTS_BOOT_SIGNER)),\ |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ |
| $(BOOT_SIGNER) /boot $(1) $(PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1),\ |
| $(BOOT_SIGNER) /recovery $(1) $(PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1)\ |
| )\ |
| ) |
| $(if $(filter true,$(PRODUCT_SUPPORTS_VBOOT)), \ |
| $(VBOOT_SIGNER) $(FUTILITY) $(1).unsigned $(PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $(1).keyblock $(1)) |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)), \ |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(call get-bootimage-partition-size,$(1),boot))), \ |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)))) |
| $(if $(filter true,$(BOARD_AVB_ENABLE)), \ |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)), \ |
| $(AVBTOOL) add_hash_footer --image $(1) --partition_size $(call get-bootimage-partition-size,$(1),boot) --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS),\ |
| $(AVBTOOL) add_hash_footer --image $(1) --partition_size $(BOARD_RECOVERYIMAGE_PARTITION_SIZE) --partition_name recovery $(INTERNAL_AVB_RECOVERY_SIGNING_ARGS) $(BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS))) |
| endef |
| |
| recoveryimage-deps := $(MKBOOTIMG) $(recovery_ramdisk) $(recovery_kernel) |
| ifeq (true,$(PRODUCT_SUPPORTS_BOOT_SIGNER)) |
| recoveryimage-deps += $(BOOT_SIGNER) |
| endif |
| ifeq (true,$(PRODUCT_SUPPORTS_VBOOT)) |
| recoveryimage-deps += $(VBOOT_SIGNER) |
| endif |
| ifeq (true,$(BOARD_AVB_ENABLE)) |
| recoveryimage-deps += $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH) |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_PREBUILT_RECOVERY_DTBOIMAGE |
| recoveryimage-deps += $(BOARD_PREBUILT_RECOVERY_DTBOIMAGE) |
| else |
| recoveryimage-deps += $(BOARD_PREBUILT_DTBOIMAGE) |
| endif |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_ACPIO |
| recoveryimage-deps += $(BOARD_RECOVERY_ACPIO) |
| endif |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| recoveryimage-deps += $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET), $(eval $(call add-dependency,$(b),$(call bootimage-to-kernel,$(b))))) |
| $(INSTALLED_BOOTIMAGE_TARGET): $(recoveryimage-deps) |
| $(call pretty,"Target boot image from recovery: $@") |
| $(call build-recoveryimage-target, $@, $(PRODUCT_OUT)/$(subst .img,,$(subst boot,kernel,$(notdir $@)))) |
| endif # BOARD_USES_RECOVERY_AS_BOOT |
| |
| $(INSTALLED_RECOVERYIMAGE_TARGET): $(recoveryimage-deps) |
| $(call build-recoveryimage-target, $@, \ |
| $(if $(filter true, $(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE)),, $(recovery_kernel))) |
| |
| ifdef RECOVERY_RESOURCE_ZIP |
| $(RECOVERY_RESOURCE_ZIP): $(INSTALLED_RECOVERYIMAGE_TARGET) | $(ZIPTIME) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) find $(TARGET_RECOVERY_ROOT_OUT)/res -type f | sort | zip -0qrjX $@ -@ |
| $(remove-timestamps-from-package) |
| endif |
| |
| .PHONY: recoveryimage-nodeps |
| recoveryimage-nodeps: |
| @echo "make $@: ignoring dependencies" |
| $(call build-recoveryimage-target, $(INSTALLED_RECOVERYIMAGE_TARGET), \ |
| $(if $(filter true, $(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE)),, $(recovery_kernel))) |
| |
| else # BUILDING_RECOVERY_IMAGE |
| RECOVERY_RESOURCE_ZIP := |
| endif # BUILDING_RECOVERY_IMAGE |
| |
| .PHONY: recoveryimage |
| recoveryimage: $(INSTALLED_RECOVERYIMAGE_TARGET) $(RECOVERY_RESOURCE_ZIP) |
| |
| ifneq ($(BOARD_NAND_PAGE_SIZE),) |
| $(error MTD device is no longer supported and thus BOARD_NAND_PAGE_SIZE is deprecated.) |
| endif |
| |
| ifneq ($(BOARD_NAND_SPARE_SIZE),) |
| $(error MTD device is no longer supported and thus BOARD_NAND_SPARE_SIZE is deprecated.) |
| endif |
| |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| # ----------------------------------------------------------------- |
| # the debug ramdisk, which is the original ramdisk plus additional |
| # files: force_debuggable, adb_debug.prop and userdebug sepolicy. |
| # When /force_debuggable is present, /init will load userdebug sepolicy |
| # and property files to allow adb root, if the device is unlocked. |
| |
| ifdef BUILDING_RAMDISK_IMAGE |
| BUILT_DEBUG_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk-debug.img |
| INSTALLED_DEBUG_RAMDISK_TARGET := $(BUILT_DEBUG_RAMDISK_TARGET) |
| |
| INTERNAL_DEBUG_RAMDISK_FILES := $(filter $(TARGET_DEBUG_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # Note: TARGET_DEBUG_RAMDISK_OUT will be $(PRODUCT_OUT)/debug_ramdisk/first_stage_ramdisk, |
| # if BOARD_USES_RECOVERY_AS_BOOT is true. Otherwise, it will be $(PRODUCT_OUT)/debug_ramdisk. |
| # But the root dir of the ramdisk to build is always $(PRODUCT_OUT)/debug_ramdisk. |
| my_debug_ramdisk_root_dir := $(PRODUCT_OUT)/debug_ramdisk |
| |
| INSTALLED_FILES_FILE_DEBUG_RAMDISK := $(PRODUCT_OUT)/installed-files-ramdisk-debug.txt |
| INSTALLED_FILES_JSON_DEBUG_RAMDISK := $(INSTALLED_FILES_FILE_DEBUG_RAMDISK:.txt=.json) |
| $(INSTALLED_FILES_FILE_DEBUG_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_DEBUG_RAMDISK) |
| $(INSTALLED_FILES_FILE_DEBUG_RAMDISK): DEBUG_RAMDISK_ROOT_DIR := $(my_debug_ramdisk_root_dir) |
| |
| # Cannot just depend on INTERNAL_DEBUG_RAMDISK_FILES like other INSTALLED_FILES_FILE_* rules. |
| # Because ramdisk-debug.img will rsync from either ramdisk.img or ramdisk-recovery.img. |
| # Need to depend on the built ramdisk-debug.img, to get a complete list of the installed files. |
| $(INSTALLED_FILES_FILE_DEBUG_RAMDISK) : $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| $(INSTALLED_FILES_FILE_DEBUG_RAMDISK) : $(INTERNAL_DEBUG_RAMDISK_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(DEBUG_RAMDISK_ROOT_DIR) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| # ramdisk-debug.img will rsync the content from either ramdisk.img or ramdisk-recovery.img, |
| # depending on whether BOARD_USES_RECOVERY_AS_BOOT is set or not. |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| my_debug_ramdisk_sync_dir := $(TARGET_RECOVERY_ROOT_OUT) |
| else |
| my_debug_ramdisk_sync_dir := $(TARGET_RAMDISK_OUT) |
| endif # BOARD_USES_RECOVERY_AS_BOOT |
| |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): DEBUG_RAMDISK_SYNC_DIR := $(my_debug_ramdisk_sync_dir) |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): DEBUG_RAMDISK_ROOT_DIR := $(my_debug_ramdisk_root_dir) |
| |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| # ramdisk-recovery.img isn't a make target, need to depend on boot.img if it's for recovery. |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): $(INSTALLED_BOOTIMAGE_TARGET) |
| else |
| # Depends on ramdisk.img, note that some target has ramdisk.img but no boot.img, e.g., emulator. |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): $(INSTALLED_RAMDISK_TARGET) |
| endif # BOARD_USES_RECOVERY_AS_BOOT |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_DEBUG_RAMDISK_FILES) | $(COMPRESSION_COMMAND_DEPS) |
| $(call pretty,"Target debug ram disk: $@") |
| mkdir -p $(TARGET_DEBUG_RAMDISK_OUT) |
| touch $(TARGET_DEBUG_RAMDISK_OUT)/force_debuggable |
| rsync -a $(DEBUG_RAMDISK_SYNC_DIR)/ $(DEBUG_RAMDISK_ROOT_DIR) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(DEBUG_RAMDISK_ROOT_DIR) | $(COMPRESSION_COMMAND) > $@ |
| |
| .PHONY: ramdisk_debug-nodeps |
| ramdisk_debug-nodeps: DEBUG_RAMDISK_SYNC_DIR := $(my_debug_ramdisk_sync_dir) |
| ramdisk_debug-nodeps: DEBUG_RAMDISK_ROOT_DIR := $(my_debug_ramdisk_root_dir) |
| ramdisk_debug-nodeps: $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| echo "make $@: ignoring dependencies" |
| mkdir -p $(TARGET_DEBUG_RAMDISK_OUT) |
| touch $(TARGET_DEBUG_RAMDISK_OUT)/force_debuggable |
| rsync -a $(DEBUG_RAMDISK_SYNC_DIR)/ $(DEBUG_RAMDISK_ROOT_DIR) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(DEBUG_RAMDISK_ROOT_DIR) | $(COMPRESSION_COMMAND) > $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| |
| my_debug_ramdisk_sync_dir := |
| my_debug_ramdisk_root_dir := |
| |
| endif # BUILDING_RAMDISK_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # the boot-debug.img, which is the kernel plus ramdisk-debug.img |
| # |
| # Note: it's intentional to skip signing for boot-debug.img, because it |
| # can only be used if the device is unlocked with verification error. |
| ifneq ($(INSTALLED_BOOTIMAGE_TARGET),) |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| ifneq ($(strip $(BOARD_KERNEL_BINARIES)),) |
| INSTALLED_DEBUG_BOOTIMAGE_TARGET := $(foreach k,$(subst kernel,boot-debug,$(BOARD_KERNEL_BINARIES)), \ |
| $(PRODUCT_OUT)/$(k).img) |
| else |
| INSTALLED_DEBUG_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot-debug.img |
| endif |
| |
| # Replace ramdisk.img in $(MKBOOTIMG) ARGS with ramdisk-debug.img to build boot-debug.img |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| INTERNAL_DEBUG_BOOTIMAGE_ARGS := $(subst $(recovery_ramdisk),$(INSTALLED_DEBUG_RAMDISK_TARGET), $(INTERNAL_RECOVERYIMAGE_ARGS)) |
| else |
| INTERNAL_DEBUG_BOOTIMAGE_ARGS := $(subst $(INSTALLED_RAMDISK_TARGET),$(INSTALLED_DEBUG_RAMDISK_TARGET), $(INTERNAL_BOOTIMAGE_ARGS)) |
| endif |
| |
| # If boot.img is chained but boot-debug.img is not signed, libavb in bootloader |
| # will fail to find valid AVB metadata from the end of /boot, thus stop booting. |
| # Using a test key to sign boot-debug.img to continue booting with the mismatched |
| # public key, if the device is unlocked. |
| ifneq ($(BOARD_AVB_BOOT_KEY_PATH),) |
| $(INSTALLED_DEBUG_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_BOOT_TEST_KEY_PATH) |
| endif |
| |
| BOARD_AVB_BOOT_TEST_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem |
| INTERNAL_AVB_BOOT_TEST_SIGNING_ARGS := --algorithm SHA256_RSA2048 --key $(BOARD_AVB_BOOT_TEST_KEY_PATH) |
| # $(1): the bootimage to sign |
| define test-key-sign-bootimage |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(call get-bootimage-partition-size,$(1),boot-debug))) |
| $(AVBTOOL) add_hash_footer \ |
| --image $(1) \ |
| --partition_size $(call get-bootimage-partition-size,$(1),boot-debug)\ |
| --partition_name boot $(INTERNAL_AVB_BOOT_TEST_SIGNING_ARGS) \ |
| $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) |
| $(call assert-max-image-size,$(1),$(call get-bootimage-partition-size,$(1),boot-debug)) |
| endef |
| |
| # $(1): output file |
| define build-debug-bootimage-target |
| $(MKBOOTIMG) --kernel $(PRODUCT_OUT)/$(subst .img,,$(subst boot-debug,kernel,$(notdir $(1)))) \ |
| $(INTERNAL_DEBUG_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $1 |
| $(if $(BOARD_AVB_BOOT_KEY_PATH),$(call test-key-sign-bootimage,$1)) |
| endef |
| |
| # Depends on original boot.img and ramdisk-debug.img, to build the new boot-debug.img |
| $(INSTALLED_DEBUG_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INSTALLED_BOOTIMAGE_TARGET) $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| $(call pretty,"Target boot debug image: $@") |
| $(call build-debug-bootimage-target, $@) |
| |
| .PHONY: bootimage_debug-nodeps |
| bootimage_debug-nodeps: $(MKBOOTIMG) |
| echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_DEBUG_BOOTIMAGE_TARGET),$(call build-debug-bootimage-target,$b)) |
| |
| endif # TARGET_NO_KERNEL |
| endif # INSTALLED_BOOTIMAGE_TARGET |
| |
| ifeq ($(BUILDING_VENDOR_BOOT_IMAGE),true) |
| ifeq ($(BUILDING_RAMDISK_IMAGE),true) |
| # ----------------------------------------------------------------- |
| # vendor debug ramdisk |
| # Combines vendor ramdisk files and debug ramdisk files to build the vendor debug ramdisk. |
| INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET := $(PRODUCT_OUT)/vendor-ramdisk-debug.cpio$(RAMDISK_EXT) |
| $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET): DEBUG_RAMDISK_FILES := $(INTERNAL_DEBUG_RAMDISK_FILES) |
| $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET): VENDOR_RAMDISK_DIR := $(TARGET_VENDOR_RAMDISK_OUT) |
| |
| INTERNAL_VENDOR_DEBUG_RAMDISK_FILES := $(filter $(TARGET_VENDOR_DEBUG_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # Note: TARGET_VENDOR_DEBUG_RAMDISK_OUT will be $(PRODUCT_OUT)/vendor_debug_ramdisk/first_stage_ramdisk, |
| # if BOARD_USES_RECOVERY_AS_BOOT is true. Otherwise, it will be $(PRODUCT_OUT)/vendor_debug_ramdisk. |
| # But the path of $(VENDOR_DEBUG_RAMDISK_DIR) to build the vendor debug ramdisk, is always |
| # $(PRODUCT_OUT)/vendor_debug_ramdisk. |
| $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET): VENDOR_DEBUG_RAMDISK_DIR := $(PRODUCT_OUT)/vendor_debug_ramdisk |
| $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET): $(INTERNAL_VENDOR_RAMDISK_TARGET) $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_VENDOR_DEBUG_RAMDISK_FILES) | $(COMPRESSION_COMMAND_DEPS) |
| $(call pretty,"Target vendor debug ram disk: $@") |
| mkdir -p $(TARGET_VENDOR_DEBUG_RAMDISK_OUT) |
| touch $(TARGET_VENDOR_DEBUG_RAMDISK_OUT)/force_debuggable |
| $(foreach debug_file,$(DEBUG_RAMDISK_FILES), \ |
| cp -f $(debug_file) $(subst $(PRODUCT_OUT)/debug_ramdisk,$(PRODUCT_OUT)/vendor_debug_ramdisk,$(debug_file)) &&) true |
| rsync -a $(VENDOR_RAMDISK_DIR)/ $(VENDOR_DEBUG_RAMDISK_DIR) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(VENDOR_DEBUG_RAMDISK_DIR) | $(COMPRESSION_COMMAND) > $@ |
| |
| INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK := $(PRODUCT_OUT)/installed-files-vendor-ramdisk-debug.txt |
| INSTALLED_FILES_JSON_VENDOR_DEBUG_RAMDISK := $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK:.txt=.json) |
| $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_VENDOR_DEBUG_RAMDISK) |
| $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK): VENDOR_DEBUG_RAMDISK_DIR := $(PRODUCT_OUT)/vendor_debug_ramdisk |
| |
| # The vendor debug ramdisk will rsync from $(TARGET_VENDOR_RAMDISK_OUT) and $(INTERNAL_DEBUG_RAMDISK_FILES), |
| # so we have to wait for the vendor debug ramdisk to be built before generating the installed file list. |
| $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK): $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET) |
| $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK): $(INTERNAL_VENDOR_DEBUG_RAMDISK_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(VENDOR_DEBUG_RAMDISK_DIR) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| # ----------------------------------------------------------------- |
| # vendor_boot-debug.img. |
| INSTALLED_VENDOR_DEBUG_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/vendor_boot-debug.img |
| |
| # The util to sign vendor_boot-debug.img with a test key. |
| BOARD_AVB_VENDOR_BOOT_TEST_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem |
| INTERNAL_AVB_VENDOR_BOOT_TEST_SIGNING_ARGS := --algorithm SHA256_RSA2048 --key $(BOARD_AVB_VENDOR_BOOT_TEST_KEY_PATH) |
| # $(1): the vendor bootimage to sign |
| define test-key-sign-vendor-bootimage |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE))) |
| $(AVBTOOL) add_hash_footer \ |
| --image $(1) \ |
| --partition_size $(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE) \ |
| --partition_name vendor_boot $(INTERNAL_AVB_VENDOR_BOOT_TEST_SIGNING_ARGS) \ |
| $(BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS) |
| $(call assert-max-image-size,$(1),$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| endef |
| |
| ifneq ($(BOARD_AVB_VENDOR_BOOT_KEY_PATH),) |
| $(INSTALLED_VENDOR_DEBUG_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_VENDOR_BOOT_TEST_KEY_PATH) |
| endif |
| |
| # Depends on vendor_boot.img and vendor-ramdisk-debug.cpio.gz to build the new vendor_boot-debug.img |
| $(INSTALLED_VENDOR_DEBUG_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INSTALLED_VENDOR_BOOTIMAGE_TARGET) $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET) |
| $(INSTALLED_VENDOR_DEBUG_BOOTIMAGE_TARGET): $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_TARGETS) |
| $(call pretty,"Target vendor_boot debug image: $@") |
| $(MKBOOTIMG) $(INTERNAL_VENDOR_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --vendor_ramdisk $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET) $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_ARGS) --vendor_boot $@ |
| $(call assert-max-image-size,$@,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| $(if $(BOARD_AVB_VENDOR_BOOT_KEY_PATH),$(call test-key-sign-vendor-bootimage,$@)) |
| |
| endif # BUILDING_RAMDISK_IMAGE |
| endif # BUILDING_VENDOR_BOOT_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # The test harness ramdisk, which is based off debug_ramdisk, plus a |
| # few additional test-harness-specific properties in adb_debug.prop. |
| |
| ifdef BUILDING_RAMDISK_IMAGE |
| BUILT_TEST_HARNESS_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk-test-harness.img |
| INSTALLED_TEST_HARNESS_RAMDISK_TARGET := $(BUILT_TEST_HARNESS_RAMDISK_TARGET) |
| |
| # rsync the content from ramdisk-debug.img to ramdisk-test-harness.img, then |
| # appends a few test harness specific properties into the adb_debug.prop. |
| TEST_HARNESS_RAMDISK_SYNC_DIR := $(PRODUCT_OUT)/debug_ramdisk |
| TEST_HARNESS_RAMDISK_ROOT_DIR := $(PRODUCT_OUT)/test_harness_ramdisk |
| |
| # The following TARGET_TEST_HARNESS_RAMDISK_OUT will be $(PRODUCT_OUT)/test_harness_ramdisk/first_stage_ramdisk, |
| # if BOARD_USES_RECOVERY_AS_BOOT is true. Otherwise, it will be $(PRODUCT_OUT)/test_harness_ramdisk. |
| TEST_HARNESS_PROP_TARGET := $(TARGET_TEST_HARNESS_RAMDISK_OUT)/adb_debug.prop |
| ADDITIONAL_TEST_HARNESS_PROPERTIES := ro.audio.silent=1 |
| ADDITIONAL_TEST_HARNESS_PROPERTIES += ro.test_harness=1 |
| |
| # $(1): a list of key=value pairs for additional property assignments |
| # $(2): the target .prop file to append the properties from $(1) |
| define append-test-harness-props |
| echo "#" >> $(2); \ |
| echo "# ADDITIONAL TEST HARNESS_PROPERTIES" >> $(2); \ |
| echo "#" >> $(2); |
| $(foreach line,$(1), echo "$(line)" >> $(2);) |
| endef |
| |
| $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET): $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_TEST_HARNESS_RAMDISK_FILES) | $(COMPRESSION_COMMAND_DEPS) |
| $(call pretty,"Target test harness ram disk: $@") |
| rsync -a $(TEST_HARNESS_RAMDISK_SYNC_DIR)/ $(TEST_HARNESS_RAMDISK_ROOT_DIR) |
| $(call append-test-harness-props,$(ADDITIONAL_TEST_HARNESS_PROPERTIES),$(TEST_HARNESS_PROP_TARGET)) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(TEST_HARNESS_RAMDISK_ROOT_DIR) | $(COMPRESSION_COMMAND) > $@ |
| |
| .PHONY: ramdisk_test_harness-nodeps |
| ramdisk_test_harness-nodeps: $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| echo "make $@: ignoring dependencies" |
| rsync -a $(TEST_HARNESS_RAMDISK_SYNC_DIR)/ $(TEST_HARNESS_RAMDISK_ROOT_DIR) |
| $(call append-test-harness-props,$(ADDITIONAL_TEST_HARNESS_PROPERTIES),$(TEST_HARNESS_PROP_TARGET)) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(TEST_HARNESS_RAMDISK_ROOT_DIR) | $(COMPRESSION_COMMAND) > $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET) |
| |
| endif # BUILDING_RAMDISK_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # the boot-test-harness.img, which is the kernel plus ramdisk-test-harness.img |
| # |
| # Note: it's intentional to skip signing for boot-test-harness.img, because it |
| # can only be used if the device is unlocked with verification error. |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| |
| ifneq ($(strip $(BOARD_KERNEL_BINARIES)),) |
| INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET := $(foreach k,$(subst kernel,boot-test-harness,$(BOARD_KERNEL_BINARIES)), \ |
| $(PRODUCT_OUT)/$(k).img) |
| else |
| INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot-test-harness.img |
| endif |
| |
| # Replace ramdisk-debug.img in $(MKBOOTIMG) ARGS with ramdisk-test-harness.img to build boot-test-harness.img |
| INTERNAL_TEST_HARNESS_BOOTIMAGE_ARGS := $(subst $(INSTALLED_DEBUG_RAMDISK_TARGET),$(INSTALLED_TEST_HARNESS_RAMDISK_TARGET),$(INTERNAL_DEBUG_BOOTIMAGE_ARGS)) |
| |
| # If boot.img is chained but boot-test-harness.img is not signed, libavb in bootloader |
| # will fail to find valid AVB metadata from the end of /boot, thus stop booting. |
| # Using a test key to sign boot-test-harness.img to continue booting with the mismatched |
| # public key, if the device is unlocked. |
| ifneq ($(BOARD_AVB_BOOT_KEY_PATH),) |
| $(INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_BOOT_TEST_KEY_PATH) |
| endif |
| |
| # $(1): output file |
| define build-boot-test-harness-target |
| $(MKBOOTIMG) --kernel $(PRODUCT_OUT)/$(subst .img,,$(subst boot-test-harness,kernel,$(notdir $(1)))) \ |
| $(INTERNAL_TEST_HARNESS_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ |
| $(if $(BOARD_AVB_BOOT_KEY_PATH),$(call test-key-sign-bootimage,$@)) |
| endef |
| |
| # Build the new boot-test-harness.img, based on boot-debug.img and ramdisk-test-harness.img. |
| $(INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INSTALLED_DEBUG_BOOTIMAGE_TARGET) $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET) |
| $(call pretty,"Target boot test harness image: $@") |
| $(call build-boot-test-harness-target,$@) |
| |
| .PHONY: bootimage_test_harness-nodeps |
| bootimage_test_harness-nodeps: $(MKBOOTIMG) |
| echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET),$(call build-boot-test-harness-target,$b)) |
| |
| endif # TARGET_NO_KERNEL |
| endif # BOARD_BUILD_SYSTEM_ROOT_IMAGE is not true |
| |
| # Creates a compatibility symlink between two partitions, e.g. /system/vendor to /vendor |
| # $1: from location (e.g $(TARGET_OUT)/vendor) |
| # $2: destination location (e.g. /vendor) |
| # $3: partition image name (e.g. vendor.img) |
| define create-partition-compat-symlink |
| $(eval \ |
| $1: |
| @echo Symlink $(patsubst $(PRODUCT_OUT)/%,%,$1) to $2 |
| mkdir -p $(dir $1) |
| if [ -d $1 ] && [ ! -h $1 ]; then \ |
| echo 'Non-symlink $1 detected!' 1>&2; \ |
| echo 'You cannot install files to $1 while building a separate $3!' 1>&2; \ |
| exit 1; \ |
| fi |
| ln -sfn $2 $1 |
| $1: .KATI_SYMLINK_OUTPUTS := $1 |
| ) |
| $1 |
| endef |
| |
| |
| # ----------------------------------------------------------------- |
| # system image |
| |
| INTERNAL_SYSTEMIMAGE_FILES := $(sort $(filter $(TARGET_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES))) |
| |
| # Create symlink /system/vendor to /vendor if necessary. |
| ifdef BOARD_USES_VENDORIMAGE |
| INTERNAL_SYSTEMIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT)/vendor,/vendor,vendor.img) |
| endif |
| |
| # Create symlink /system/product to /product if necessary. |
| ifdef BOARD_USES_PRODUCTIMAGE |
| INTERNAL_SYSTEMIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT)/product,/product,product.img) |
| endif |
| |
| # Create symlink /system/system_ext to /system_ext if necessary. |
| ifdef BOARD_USES_SYSTEM_EXTIMAGE |
| INTERNAL_SYSTEMIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT)/system_ext,/system_ext,system_ext.img) |
| endif |
| |
| FULL_SYSTEMIMAGE_DEPS := $(INTERNAL_SYSTEMIMAGE_FILES) $(INTERNAL_USERIMAGES_DEPS) |
| |
| # ASAN libraries in the system image - add dependency. |
| ASAN_IN_SYSTEM_INSTALLED := $(TARGET_OUT)/asan.tar.bz2 |
| ifneq (,$(filter address, $(SANITIZE_TARGET))) |
| ifeq (true,$(SANITIZE_TARGET_SYSTEM)) |
| FULL_SYSTEMIMAGE_DEPS += $(ASAN_IN_SYSTEM_INSTALLED) |
| endif |
| endif |
| |
| FULL_SYSTEMIMAGE_DEPS += $(INTERNAL_ROOT_FILES) $(INSTALLED_FILES_FILE_ROOT) |
| |
| # ----------------------------------------------------------------- |
| ifdef BUILDING_SYSTEM_IMAGE |
| |
| # Install system linker configuration |
| # Collect all available stub libraries installed in system and install with predefined linker configuration |
| SYSTEM_LINKER_CONFIG := $(TARGET_OUT)/etc/linker.config.pb |
| $(SYSTEM_LINKER_CONFIG) : $(INTERNAL_SYSTEMIMAGE_FILES) $(LINKER_CONFIG_PATH_system_linker_config) | conv_linker_config |
| $(HOST_OUT_EXECUTABLES)/conv_linker_config systemprovide --source $(LINKER_CONFIG_PATH_system_linker_config)\ |
| --output $@ --value "$(STUB_LIBRARIES)" --system "$(TARGET_OUT)" |
| |
| FULL_SYSTEMIMAGE_DEPS += $(SYSTEM_LINKER_CONFIG) |
| |
| # installed file list |
| # Depending on anything that $(BUILT_SYSTEMIMAGE) depends on. |
| # We put installed-files.txt ahead of image itself in the dependency graph |
| # so that we can get the size stat even if the build fails due to too large |
| # system image. |
| INSTALLED_FILES_FILE := $(PRODUCT_OUT)/installed-files.txt |
| INSTALLED_FILES_JSON := $(INSTALLED_FILES_FILE:.txt=.json) |
| $(INSTALLED_FILES_FILE): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON) |
| $(INSTALLED_FILES_FILE): $(FULL_SYSTEMIMAGE_DEPS) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| .PHONY: installed-file-list |
| installed-file-list: $(INSTALLED_FILES_FILE) |
| |
| $(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE)) |
| |
| systemimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,systemimage) |
| BUILT_SYSTEMIMAGE := $(systemimage_intermediates)/system.img |
| |
| # $(1): output file |
| define build-systemimage-target |
| @echo "Target system fs image: $(1)" |
| @mkdir -p $(dir $(1)) $(systemimage_intermediates) && rm -rf $(systemimage_intermediates)/system_image_info.txt |
| $(call generate-image-prop-dictionary, $(systemimage_intermediates)/system_image_info.txt,system, \ |
| skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT) $(systemimage_intermediates)/system_image_info.txt $(1) $(TARGET_OUT) \ |
| || ( mkdir -p $${DIST_DIR}; \ |
| cp $(INSTALLED_FILES_FILE) $${DIST_DIR}/installed-files-rescued.txt; \ |
| exit 1 ) |
| endef |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(BUILT_SYSTEMIMAGE): $(BOARD_AVB_SYSTEM_KEY_PATH) |
| endif |
| $(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE) |
| $(call build-systemimage-target,$@) |
| |
| INSTALLED_SYSTEMIMAGE_TARGET := $(PRODUCT_OUT)/system.img |
| SYSTEMIMAGE_SOURCE_DIR := $(TARGET_OUT) |
| |
| # INSTALLED_SYSTEMIMAGE_TARGET used to be named INSTALLED_SYSTEMIMAGE. Create an alias for backward |
| # compatibility, in case device-specific Makefiles still refer to the old name. |
| INSTALLED_SYSTEMIMAGE := $(INSTALLED_SYSTEMIMAGE_TARGET) |
| |
| # The system partition needs room for the recovery image as well. We |
| # now store the recovery image as a binary patch using the boot image |
| # as the source (since they are very similar). Generate the patch so |
| # we can see how big it's going to be, and include that in the system |
| # image size check calculation. |
| ifneq ($(INSTALLED_BOOTIMAGE_TARGET),) |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| ifneq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true) |
| ifneq (,$(filter true, $(BOARD_BUILD_SYSTEM_ROOT_IMAGE) $(BOARD_INCLUDE_RECOVERY_DTBO) $(BOARD_INCLUDE_RECOVERY_ACPIO))) |
| diff_tool := $(HOST_OUT_EXECUTABLES)/bsdiff |
| else |
| diff_tool := $(HOST_OUT_EXECUTABLES)/imgdiff |
| endif |
| intermediates := $(call intermediates-dir-for,PACKAGING,recovery_patch) |
| RECOVERY_FROM_BOOT_PATCH := $(intermediates)/recovery_from_boot.p |
| $(RECOVERY_FROM_BOOT_PATCH): PRIVATE_DIFF_TOOL := $(diff_tool) |
| $(RECOVERY_FROM_BOOT_PATCH): \ |
| $(INSTALLED_RECOVERYIMAGE_TARGET) \ |
| $(firstword $(INSTALLED_BOOTIMAGE_TARGET)) \ |
| $(diff_tool) |
| @echo "Construct recovery from boot" |
| mkdir -p $(dir $@) |
| $(PRIVATE_DIFF_TOOL) $(firstword $(INSTALLED_BOOTIMAGE_TARGET)) $(INSTALLED_RECOVERYIMAGE_TARGET) $@ |
| else # $(BOARD_USES_FULL_RECOVERY_IMAGE) == true |
| RECOVERY_FROM_BOOT_PATCH := $(INSTALLED_RECOVERYIMAGE_TARGET) |
| endif # BOARD_USES_FULL_RECOVERY_IMAGE |
| endif # INSTALLED_RECOVERYIMAGE_TARGET |
| endif # INSTALLED_BOOTIMAGE_TARGET |
| |
| $(INSTALLED_SYSTEMIMAGE_TARGET): $(BUILT_SYSTEMIMAGE) |
| @echo "Install system fs image: $@" |
| $(copy-file-to-target) |
| $(hide) $(call assert-max-image-size,$@,$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| |
| systemimage: $(INSTALLED_SYSTEMIMAGE_TARGET) |
| |
| .PHONY: systemimage-nodeps snod |
| systemimage-nodeps snod: $(filter-out systemimage-nodeps snod,$(MAKECMDGOALS)) \ |
| | $(INTERNAL_USERIMAGES_DEPS) |
| @echo "make $@: ignoring dependencies" |
| $(call build-systemimage-target,$(INSTALLED_SYSTEMIMAGE_TARGET)) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMIMAGE_TARGET),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| ifeq (true,$(WITH_DEXPREOPT)) |
| $(warning Warning: with dexpreopt enabled, you may need a full rebuild.) |
| endif |
| |
| endif # BUILDING_SYSTEM_IMAGE |
| |
| .PHONY: sync syncsys |
| sync syncsys: $(INTERNAL_SYSTEMIMAGE_FILES) |
| |
| # ----------------------------------------------------------------- |
| # Old PDK fusion targets |
| .PHONY: platform |
| platform: |
| echo "Warning: 'platform' is obsolete" |
| |
| .PHONY: platform-java |
| platform-java: |
| echo "Warning: 'platform-java' is obsolete" |
| |
| # ----------------------------------------------------------------- |
| # data partition image |
| INTERNAL_USERDATAIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_DATA)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| ifdef BUILDING_USERDATA_IMAGE |
| userdataimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,userdata) |
| BUILT_USERDATAIMAGE_TARGET := $(PRODUCT_OUT)/userdata.img |
| |
| define build-userdataimage-target |
| $(call pretty,"Target userdata fs image: $(INSTALLED_USERDATAIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_DATA) |
| @mkdir -p $(userdataimage_intermediates) && rm -rf $(userdataimage_intermediates)/userdata_image_info.txt |
| $(call generate-image-prop-dictionary, $(userdataimage_intermediates)/userdata_image_info.txt,userdata,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_DATA) $(userdataimage_intermediates)/userdata_image_info.txt \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_USERDATAIMAGE_TARGET),$(BOARD_USERDATAIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_USERDATAIMAGE_TARGET := $(BUILT_USERDATAIMAGE_TARGET) |
| INSTALLED_USERDATAIMAGE_TARGET_DEPS := \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_USERDATAIMAGE_FILES) |
| $(INSTALLED_USERDATAIMAGE_TARGET): $(INSTALLED_USERDATAIMAGE_TARGET_DEPS) |
| $(build-userdataimage-target) |
| |
| .PHONY: userdataimage-nodeps |
| userdataimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-userdataimage-target) |
| |
| endif # BUILDING_USERDATA_IMAGE |
| |
| # ASAN libraries in the system image - build rule. |
| ASAN_OUT_DIRS_FOR_SYSTEM_INSTALL := $(sort $(patsubst $(PRODUCT_OUT)/%,%,\ |
| $(TARGET_OUT_SHARED_LIBRARIES) \ |
| $(2ND_TARGET_OUT_SHARED_LIBRARIES) \ |
| $(TARGET_OUT_VENDOR_SHARED_LIBRARIES) \ |
| $(2ND_TARGET_OUT_VENDOR_SHARED_LIBRARIES))) |
| # Extra options: Enforce the system user for the files to avoid having to change ownership. |
| ASAN_SYSTEM_INSTALL_OPTIONS := --owner=1000 --group=1000 |
| # Note: experimentally, it seems not worth it to try to get "best" compression. We don't save |
| # enough space. |
| $(ASAN_IN_SYSTEM_INSTALLED): $(INSTALLED_USERDATAIMAGE_TARGET_DEPS) |
| tar cfj $(ASAN_IN_SYSTEM_INSTALLED) $(ASAN_SYSTEM_INSTALL_OPTIONS) -C $(TARGET_OUT_DATA)/.. $(ASAN_OUT_DIRS_FOR_SYSTEM_INSTALL) >/dev/null |
| |
| # ----------------------------------------------------------------- |
| # partition table image |
| ifdef BOARD_BPT_INPUT_FILES |
| |
| BUILT_BPTIMAGE_TARGET := $(PRODUCT_OUT)/partition-table.img |
| BUILT_BPTJSON_TARGET := $(PRODUCT_OUT)/partition-table.bpt |
| |
| INTERNAL_BVBTOOL_MAKE_TABLE_ARGS := \ |
| --output_gpt $(BUILT_BPTIMAGE_TARGET) \ |
| --output_json $(BUILT_BPTJSON_TARGET) \ |
| $(foreach file, $(BOARD_BPT_INPUT_FILES), --input $(file)) |
| |
| ifdef BOARD_BPT_DISK_SIZE |
| INTERNAL_BVBTOOL_MAKE_TABLE_ARGS += --disk_size $(BOARD_BPT_DISK_SIZE) |
| endif |
| |
| define build-bptimage-target |
| $(call pretty,"Target partition table image: $(INSTALLED_BPTIMAGE_TARGET)") |
| $(hide) $(BPTTOOL) make_table $(INTERNAL_BVBTOOL_MAKE_TABLE_ARGS) $(BOARD_BPT_MAKE_TABLE_ARGS) |
| endef |
| |
| INSTALLED_BPTIMAGE_TARGET := $(BUILT_BPTIMAGE_TARGET) |
| $(BUILT_BPTJSON_TARGET): $(INSTALLED_BPTIMAGE_TARGET) |
| $(hide) touch -c $(BUILT_BPTJSON_TARGET) |
| |
| $(INSTALLED_BPTIMAGE_TARGET): $(BPTTOOL) $(BOARD_BPT_INPUT_FILES) |
| $(build-bptimage-target) |
| |
| .PHONY: bptimage-nodeps |
| bptimage-nodeps: |
| $(build-bptimage-target) |
| |
| endif # BOARD_BPT_INPUT_FILES |
| |
| # ----------------------------------------------------------------- |
| # cache partition image |
| ifdef BUILDING_CACHE_IMAGE |
| INTERNAL_CACHEIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_CACHE)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| cacheimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,cache) |
| BUILT_CACHEIMAGE_TARGET := $(PRODUCT_OUT)/cache.img |
| |
| define build-cacheimage-target |
| $(call pretty,"Target cache fs image: $(INSTALLED_CACHEIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_CACHE) |
| @mkdir -p $(cacheimage_intermediates) && rm -rf $(cacheimage_intermediates)/cache_image_info.txt |
| $(call generate-image-prop-dictionary, $(cacheimage_intermediates)/cache_image_info.txt,cache,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_CACHE) $(cacheimage_intermediates)/cache_image_info.txt \ |
| $(INSTALLED_CACHEIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_CACHEIMAGE_TARGET),$(BOARD_CACHEIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_CACHEIMAGE_TARGET := $(BUILT_CACHEIMAGE_TARGET) |
| $(INSTALLED_CACHEIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_CACHEIMAGE_FILES) |
| $(build-cacheimage-target) |
| |
| .PHONY: cacheimage-nodeps |
| cacheimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-cacheimage-target) |
| |
| else # BUILDING_CACHE_IMAGE |
| # we need to ignore the broken cache link when doing the rsync |
| IGNORE_CACHE_LINK := --exclude=cache |
| endif # BUILDING_CACHE_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # system_other partition image |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| ifeq ($(BOARD_USES_SYSTEM_OTHER_ODEX),true) |
| # Marker file to identify that odex files are installed |
| INSTALLED_SYSTEM_OTHER_ODEX_MARKER := $(TARGET_OUT_SYSTEM_OTHER)/system-other-odex-marker |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_SYSTEM_OTHER_ODEX_MARKER) |
| $(INSTALLED_SYSTEM_OTHER_ODEX_MARKER): |
| $(hide) touch $@ |
| endif |
| |
| INTERNAL_SYSTEMOTHERIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_SYSTEM_OTHER)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # system_other dex files are installed as a side-effect of installing system image files |
| INTERNAL_SYSTEMOTHERIMAGE_FILES += $(INTERNAL_SYSTEMIMAGE_FILES) |
| |
| INSTALLED_FILES_FILE_SYSTEMOTHER := $(PRODUCT_OUT)/installed-files-system-other.txt |
| INSTALLED_FILES_JSON_SYSTEMOTHER := $(INSTALLED_FILES_FILE_SYSTEMOTHER:.txt=.json) |
| $(INSTALLED_FILES_FILE_SYSTEMOTHER): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_SYSTEMOTHER) |
| $(INSTALLED_FILES_FILE_SYSTEMOTHER) : $(INTERNAL_SYSTEMOTHERIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_SYSTEM_OTHER) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| # Determines partition size for system_other.img. |
| ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true) |
| ifneq ($(filter system,$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)),) |
| INTERNAL_SYSTEM_OTHER_PARTITION_SIZE := $(BOARD_SUPER_PARTITION_SYSTEM_DEVICE_SIZE) |
| endif |
| endif |
| |
| ifndef INTERNAL_SYSTEM_OTHER_PARTITION_SIZE |
| INTERNAL_SYSTEM_OTHER_PARTITION_SIZE:= $(BOARD_SYSTEMIMAGE_PARTITION_SIZE) |
| endif |
| |
| systemotherimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,system_other) |
| BUILT_SYSTEMOTHERIMAGE_TARGET := $(PRODUCT_OUT)/system_other.img |
| |
| # Note that we assert the size is SYSTEMIMAGE_PARTITION_SIZE since this is the 'b' system image. |
| define build-systemotherimage-target |
| $(call pretty,"Target system_other fs image: $(INSTALLED_SYSTEMOTHERIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_SYSTEM_OTHER) |
| @mkdir -p $(systemotherimage_intermediates) && rm -rf $(systemotherimage_intermediates)/system_other_image_info.txt |
| $(call generate-image-prop-dictionary, $(systemotherimage_intermediates)/system_other_image_info.txt,system,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_SYSTEM_OTHER) $(systemotherimage_intermediates)/system_other_image_info.txt \ |
| $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_SYSTEMOTHERIMAGE_TARGET),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_SYSTEMOTHERIMAGE_TARGET := $(BUILT_SYSTEMOTHERIMAGE_TARGET) |
| ifneq (true,$(SANITIZE_LITE)) |
| # Only create system_other when not building the second stage of a SANITIZE_LITE build. |
| $(INSTALLED_SYSTEMOTHERIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_SYSTEMOTHERIMAGE_FILES) $(INSTALLED_FILES_FILE_SYSTEMOTHER) |
| $(build-systemotherimage-target) |
| endif |
| |
| .PHONY: systemotherimage-nodeps |
| systemotherimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-systemotherimage-target) |
| |
| endif # BUILDING_SYSTEM_OTHER_IMAGE |
| |
| |
| # ----------------------------------------------------------------- |
| # vendor partition image |
| ifdef BUILDING_VENDOR_IMAGE |
| INTERNAL_VENDORIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_VENDOR)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| |
| # Create symlink /vendor/odm to /odm if necessary. |
| ifdef BOARD_USES_ODMIMAGE |
| INTERNAL_VENDORIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT_VENDOR)/odm,/odm,odm.img) |
| endif |
| |
| # Create symlinks for vendor_dlkm on devices with a vendor_dlkm partition: |
| # /vendor/lib/modules -> /vendor_dlkm/lib/modules |
| # |
| # On devices with a vendor_dlkm partition, |
| # - /vendor/lib/modules is a symlink to a directory that stores vendor DLKMs. |
| # - /vendor_dlkm/{etc,...} store other vendor_dlkm files directly. The vendor_dlkm partition is |
| # mounted at /vendor_dlkm at runtime and the symlinks created in system/core/rootdir/Android.mk |
| # are hidden. |
| # On devices without a vendor_dlkm partition, |
| # - /vendor/lib/modules stores vendor DLKMs directly. |
| # - /vendor_dlkm/{etc,...} are symlinks to directories that store other vendor_dlkm files. |
| # See system/core/rootdir/Android.mk for a list of created symlinks. |
| # The vendor DLKMs and other vendor_dlkm files must not be accessed using other paths because they |
| # are not guaranteed to exist on all devices. |
| ifdef BOARD_USES_VENDOR_DLKMIMAGE |
| INTERNAL_VENDORIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT_VENDOR)/lib/modules,/vendor_dlkm/lib/modules,vendor_dlkm.img) |
| endif |
| |
| INSTALLED_FILES_FILE_VENDOR := $(PRODUCT_OUT)/installed-files-vendor.txt |
| INSTALLED_FILES_JSON_VENDOR := $(INSTALLED_FILES_FILE_VENDOR:.txt=.json) |
| $(INSTALLED_FILES_FILE_VENDOR): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_VENDOR) |
| $(INSTALLED_FILES_FILE_VENDOR) : $(INTERNAL_VENDORIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_VENDOR) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| vendorimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,vendor) |
| BUILT_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img |
| define build-vendorimage-target |
| $(call pretty,"Target vendor fs image: $(INSTALLED_VENDORIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_VENDOR) |
| @mkdir -p $(vendorimage_intermediates) && rm -rf $(vendorimage_intermediates)/vendor_image_info.txt |
| $(call generate-image-prop-dictionary, $(vendorimage_intermediates)/vendor_image_info.txt,vendor,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_VENDOR) $(vendorimage_intermediates)/vendor_image_info.txt \ |
| $(INSTALLED_VENDORIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_VENDORIMAGE_TARGET) $(RECOVERY_FROM_BOOT_PATCH),$(BOARD_VENDORIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_VENDORIMAGE_TARGET := $(BUILT_VENDORIMAGE_TARGET) |
| $(INSTALLED_VENDORIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_VENDORIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_VENDOR) \ |
| $(RECOVERY_FROM_BOOT_PATCH) |
| $(build-vendorimage-target) |
| |
| .PHONY: vendorimage-nodeps vnod |
| vendorimage-nodeps vnod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-vendorimage-target) |
| |
| sync: $(INTERNAL_VENDORIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_VENDORIMAGE |
| INSTALLED_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_VENDORIMAGE),$(INSTALLED_VENDORIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # product partition image |
| ifdef BUILDING_PRODUCT_IMAGE |
| INTERNAL_PRODUCTIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_PRODUCT)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_PRODUCT := $(PRODUCT_OUT)/installed-files-product.txt |
| INSTALLED_FILES_JSON_PRODUCT := $(INSTALLED_FILES_FILE_PRODUCT:.txt=.json) |
| $(INSTALLED_FILES_FILE_PRODUCT): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_PRODUCT) |
| $(INSTALLED_FILES_FILE_PRODUCT) : $(INTERNAL_PRODUCTIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_PRODUCT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| productimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,product) |
| BUILT_PRODUCTIMAGE_TARGET := $(PRODUCT_OUT)/product.img |
| define build-productimage-target |
| $(call pretty,"Target product fs image: $(INSTALLED_PRODUCTIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_PRODUCT) |
| @mkdir -p $(productimage_intermediates) && rm -rf $(productimage_intermediates)/product_image_info.txt |
| $(call generate-image-prop-dictionary, $(productimage_intermediates)/product_image_info.txt,product,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_PRODUCT) $(productimage_intermediates)/product_image_info.txt \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_PRODUCTIMAGE_TARGET),$(BOARD_PRODUCTIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_PRODUCTIMAGE_TARGET := $(BUILT_PRODUCTIMAGE_TARGET) |
| $(INSTALLED_PRODUCTIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_PRODUCTIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_PRODUCT) |
| $(build-productimage-target) |
| |
| .PHONY: productimage-nodeps pnod |
| productimage-nodeps pnod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-productimage-target) |
| |
| sync: $(INTERNAL_PRODUCTIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_PRODUCTIMAGE |
| INSTALLED_PRODUCTIMAGE_TARGET := $(PRODUCT_OUT)/product.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_PRODUCTIMAGE),$(INSTALLED_PRODUCTIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # system_ext partition image |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| INTERNAL_SYSTEM_EXTIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_SYSTEM_EXT)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_SYSTEM_EXT := $(PRODUCT_OUT)/installed-files-system_ext.txt |
| INSTALLED_FILES_JSON_SYSTEM_EXT := $(INSTALLED_FILES_FILE_SYSTEM_EXT:.txt=.json) |
| $(INSTALLED_FILES_FILE_SYSTEM_EXT): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_SYSTEM_EXT) |
| $(INSTALLED_FILES_FILE_SYSTEM_EXT) : $(INTERNAL_SYSTEM_EXTIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_SYSTEM_EXT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| system_extimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,system_ext) |
| BUILT_SYSTEM_EXTIMAGE_TARGET := $(PRODUCT_OUT)/system_ext.img |
| define build-system_extimage-target |
| $(call pretty,"Target system_ext fs image: $(INSTALLED_SYSTEM_EXTIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_SYSTEM_EXT) |
| @mkdir -p $(system_extimage_intermediates) && rm -rf $(system_extimage_intermediates)/system_ext_image_info.txt |
| $(call generate-image-prop-dictionary, $(system_extimage_intermediates)/system_ext_image_info.txt,system_ext, skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_SYSTEM_EXT) \ |
| $(system_extimage_intermediates)/system_ext_image_info.txt \ |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) \ |
| $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET),$(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_SYSTEM_EXTIMAGE_TARGET := $(BUILT_SYSTEM_EXTIMAGE_TARGET) |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_SYSTEM_EXTIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_SYSTEM_EXT) |
| $(build-system_extimage-target) |
| |
| .PHONY: systemextimage-nodeps senod |
| systemextimage-nodeps senod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-system_extimage-target) |
| |
| sync: $(INTERNAL_SYSTEM_EXTIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_SYSTEM_EXTIMAGE |
| INSTALLED_SYSTEM_EXTIMAGE_TARGET := $(PRODUCT_OUT)/system_ext.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_SYSTEM_EXTIMAGE),$(INSTALLED_SYSTEM_EXTIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # odm partition image |
| ifdef BUILDING_ODM_IMAGE |
| INTERNAL_ODMIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_ODM)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # Create symlinks for odm_dlkm on devices with a odm_dlkm partition: |
| # /odm/lib/modules -> /odm_dlkm/lib/modules |
| # |
| # On devices with a odm_dlkm partition, |
| # - /odm/lib/modules is a symlink to a directory that stores odm DLKMs. |
| # - /odm_dlkm/{etc,...} store other odm_dlkm files directly. The odm_dlkm partition is |
| # mounted at /odm_dlkm at runtime and the symlinks created in system/core/rootdir/Android.mk |
| # are hidden. |
| # On devices without a odm_dlkm partition, |
| # - /odm/lib/modules stores odm DLKMs directly. |
| # - /odm_dlkm/{etc,...} are symlinks to directories that store other odm_dlkm files. |
| # See system/core/rootdir/Android.mk for a list of created symlinks. |
| # The odm DLKMs and other odm_dlkm files must not be accessed using other paths because they |
| # are not guaranteed to exist on all devices. |
| ifdef BOARD_USES_ODM_DLKMIMAGE |
| INTERNAL_ODMIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT_ODM)/lib/modules,/odm_dlkm/lib/modules,odm_dlkm.img) |
| endif |
| |
| INSTALLED_FILES_FILE_ODM := $(PRODUCT_OUT)/installed-files-odm.txt |
| INSTALLED_FILES_JSON_ODM := $(INSTALLED_FILES_FILE_ODM:.txt=.json) |
| $(INSTALLED_FILES_FILE_ODM): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_ODM) |
| $(INSTALLED_FILES_FILE_ODM) : $(INTERNAL_ODMIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_ODM) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| odmimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,odm) |
| BUILT_ODMIMAGE_TARGET := $(PRODUCT_OUT)/odm.img |
| define build-odmimage-target |
| $(call pretty,"Target odm fs image: $(INSTALLED_ODMIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_ODM) |
| @mkdir -p $(odmimage_intermediates) && rm -rf $(odmimage_intermediates)/odm_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(odmimage_intermediates)/odm_image_info.txt, skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_ODM) $(odmimage_intermediates)/odm_image_info.txt \ |
| $(INSTALLED_ODMIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_ODMIMAGE_TARGET),$(BOARD_ODMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_ODMIMAGE_TARGET := $(BUILT_ODMIMAGE_TARGET) |
| $(INSTALLED_ODMIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_ODMIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_ODM) |
| $(build-odmimage-target) |
| |
| .PHONY: odmimage-nodeps onod |
| odmimage-nodeps onod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-odmimage-target) |
| |
| sync: $(INTERNAL_ODMIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_ODMIMAGE |
| INSTALLED_ODMIMAGE_TARGET := $(PRODUCT_OUT)/odm.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_ODMIMAGE),$(INSTALLED_ODMIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # vendor_dlkm partition image |
| ifdef BUILDING_VENDOR_DLKM_IMAGE |
| INTERNAL_VENDOR_DLKMIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_VENDOR_DLKM)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_VENDOR_DLKM := $(PRODUCT_OUT)/installed-files-vendor_dlkm.txt |
| INSTALLED_FILES_JSON_VENDOR_DLKM := $(INSTALLED_FILES_FILE_VENDOR_DLKM:.txt=.json) |
| $(INSTALLED_FILES_FILE_VENDOR_DLKM): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_VENDOR_DLKM) |
| $(INSTALLED_FILES_FILE_VENDOR_DLKM) : $(INTERNAL_VENDOR_DLKMIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_VENDOR_DLKM) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| vendor_dlkmimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,vendor_dlkm) |
| BUILT_VENDOR_DLKMIMAGE_TARGET := $(PRODUCT_OUT)/vendor_dlkm.img |
| define build-vendor_dlkmimage-target |
| $(call pretty,"Target vendor_dlkm fs image: $(INSTALLED_VENDOR_DLKMIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_VENDOR_DLKM) |
| @mkdir -p $(vendor_dlkmimage_intermediates) && rm -rf $(vendor_dlkmimage_intermediates)/vendor_dlkm_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(vendor_dlkmimage_intermediates)/vendor_dlkm_image_info.txt, skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_VENDOR_DLKM) $(vendor_dlkmimage_intermediates)/vendor_dlkm_image_info.txt \ |
| $(INSTALLED_VENDOR_DLKMIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_VENDOR_DLKMIMAGE_TARGET),$(BOARD_VENDOR_DLKMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_VENDOR_DLKMIMAGE_TARGET := $(BUILT_VENDOR_DLKMIMAGE_TARGET) |
| $(INSTALLED_VENDOR_DLKMIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_VENDOR_DLKMIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_VENDOR_DLKM) |
| $(build-vendor_dlkmimage-target) |
| |
| .PHONY: vendor_dlkmimage-nodeps vdnod |
| vendor_dlkmimage-nodeps vdnod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-vendor_dlkmimage-target) |
| |
| sync: $(INTERNAL_VENDOR_DLKMIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_VENDOR_DLKMIMAGE |
| INSTALLED_VENDOR_DLKMIMAGE_TARGET := $(PRODUCT_OUT)/vendor_dlkm.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_VENDOR_DLKMIMAGE),$(INSTALLED_VENDOR_DLKMIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # odm_dlkm partition image |
| ifdef BUILDING_ODM_DLKM_IMAGE |
| INTERNAL_ODM_DLKMIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_ODM_DLKM)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_ODM_DLKM := $(PRODUCT_OUT)/installed-files-odm_dlkm.txt |
| INSTALLED_FILES_JSON_ODM_DLKM := $(INSTALLED_FILES_FILE_ODM_DLKM:.txt=.json) |
| $(INSTALLED_FILES_FILE_ODM_DLKM): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_ODM_DLKM) |
| $(INSTALLED_FILES_FILE_ODM_DLKM) : $(INTERNAL_ODM_DLKMIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_ODM_DLKM) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| odm_dlkmimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,odm_dlkm) |
| BUILT_ODM_DLKMIMAGE_TARGET := $(PRODUCT_OUT)/odm_dlkm.img |
| define build-odm_dlkmimage-target |
| $(call pretty,"Target odm_dlkm fs image: $(INSTALLED_ODM_DLKMIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_ODM_DLKM) |
| @mkdir -p $(odm_dlkmimage_intermediates) && rm -rf $(odm_dlkmimage_intermediates)/odm_dlkm_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(odm_dlkmimage_intermediates)/odm_dlkm_image_info.txt, skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_ODM_DLKM) $(odm_dlkmimage_intermediates)/odm_dlkm_image_info.txt \ |
| $(INSTALLED_ODM_DLKMIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_ODM_DLKMIMAGE_TARGET),$(BOARD_ODM_DLKMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_ODM_DLKMIMAGE_TARGET := $(BUILT_ODM_DLKMIMAGE_TARGET) |
| $(INSTALLED_ODM_DLKMIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_ODM_DLKMIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_ODM_DLKM) |
| $(build-odm_dlkmimage-target) |
| |
| .PHONY: odm_dlkmimage-nodeps odnod |
| odm_dlkmimage-nodeps odnod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-odm_dlkmimage-target) |
| |
| sync: $(INTERNAL_ODM_DLKMIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_ODM_DLKMIMAGE |
| INSTALLED_ODM_DLKMIMAGE_TARGET := $(PRODUCT_OUT)/odm_dlkm.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_ODM_DLKMIMAGE),$(INSTALLED_ODM_DLKMIMAGE_TARGET))) |
| endif |
| |
| |
| # ----------------------------------------------------------------- |
| # dtbo image |
| ifdef BOARD_PREBUILT_DTBOIMAGE |
| INSTALLED_DTBOIMAGE_TARGET := $(PRODUCT_OUT)/dtbo.img |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) $(AVBTOOL) $(BOARD_AVB_DTBO_KEY_PATH) |
| cp $(BOARD_PREBUILT_DTBOIMAGE) $@ |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| --partition_size $(BOARD_DTBOIMG_PARTITION_SIZE) \ |
| --partition_name dtbo $(INTERNAL_AVB_DTBO_SIGNING_ARGS) \ |
| $(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS) |
| else |
| $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) |
| cp $(BOARD_PREBUILT_DTBOIMAGE) $@ |
| endif |
| |
| endif # BOARD_PREBUILT_DTBOIMAGE |
| |
| # ----------------------------------------------------------------- |
| # Protected VM firmware image |
| ifdef BOARD_PREBUILT_PVMFWIMAGE |
| INSTALLED_PVMFWIMAGE_TARGET := $(PRODUCT_OUT)/pvmfw.img |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_PVMFWIMAGE_TARGET): $(BOARD_PREBUILT_PVMFWIMAGE) $(AVBTOOL) $(BOARD_AVB_PVMFW_KEY_PATH) |
| cp $(BOARD_PREBUILT_PVMFWIMAGE) $@ |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| --partition_size $(BOARD_PVMFWIMG_PARTITION_SIZE) \ |
| --partition_name pvmfw $(INTERNAL_AVB_PVMFW_SIGNING_ARGS) \ |
| $(BOARD_AVB_PVMFW_ADD_HASH_FOOTER_ARGS) |
| else |
| $(INSTALLED_PVMFWIMAGE_TARGET): $(BOARD_PREBUILT_PVMFWIMAGE) |
| cp $(BOARD_PREBUILT_PVMFWIMAGE) $@ |
| endif |
| |
| endif # BOARD_PREBUILT_PVMFWIMAGE |
| |
| # Returns a list of image targets corresponding to the given list of partitions. For example, it |
| # returns "$(INSTALLED_PRODUCTIMAGE_TARGET)" for "product", or "$(INSTALLED_SYSTEMIMAGE_TARGET) |
| # $(INSTALLED_VENDORIMAGE_TARGET)" for "system vendor". |
| # (1): list of partitions like "system", "vendor" or "system product system_ext". |
| define images-for-partitions |
| $(strip $(foreach item,$(1),$(INSTALLED_$(call to-upper,$(item))IMAGE_TARGET))) |
| endef |
| |
| # ----------------------------------------------------------------- |
| # custom images |
| INSTALLED_CUSTOMIMAGES_TARGET := |
| |
| ifneq ($(strip $(BOARD_CUSTOMIMAGES_PARTITION_LIST)),) |
| INTERNAL_AVB_CUSTOMIMAGES_SIGNING_ARGS := |
| |
| # Sign custom image. |
| # $(1): the prebuilt custom image. |
| # $(2): the mount point of the prebuilt custom image. |
| # $(3): the signed custom image target. |
| define sign_custom_image |
| $(3): $(1) $(INTERNAL_USERIMAGES_DEPS) |
| @echo Target custom image: $(3) |
| mkdir -p $(dir $(3)) |
| cp $(1) $(3) |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$$$PATH \ |
| $(AVBTOOL) add_hashtree_footer \ |
| --image $(3) \ |
| --key $(BOARD_AVB_$(call to-upper,$(2))_KEY_PATH) \ |
| --algorithm $(BOARD_AVB_$(call to-upper,$(2))_ALGORITHM) \ |
| --partition_size $(BOARD_AVB_$(call to-upper,$(2))_PARTITION_SIZE) \ |
| --partition_name $(2) \ |
| $(INTERNAL_AVB_CUSTOMIMAGES_SIGNING_ARGS) \ |
| $(BOARD_AVB_$(call to-upper,$(2))_ADD_HASHTREE_FOOTER_ARGS) |
| endif |
| INSTALLED_CUSTOMIMAGES_TARGET += $(3) |
| endef |
| |
| $(foreach partition,$(BOARD_CUSTOMIMAGES_PARTITION_LIST), \ |
| $(foreach image,$(BOARD_AVB_$(call to-upper,$(partition))_IMAGE_LIST), \ |
| $(eval $(call sign_custom_image,$(image),$(partition),$(PRODUCT_OUT)/$(notdir $(image)))))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # vbmeta image |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| |
| BUILT_VBMETAIMAGE_TARGET := $(PRODUCT_OUT)/vbmeta.img |
| AVB_CHAIN_KEY_DIR := $(TARGET_OUT_INTERMEDIATES)/avb_chain_keys |
| |
| ifdef BOARD_AVB_KEY_PATH |
| $(if $(BOARD_AVB_ALGORITHM),,$(error BOARD_AVB_ALGORITHM is not defined)) |
| else |
| # If key path isn't specified, use the 4096-bit test key. |
| BOARD_AVB_ALGORITHM := SHA256_RSA4096 |
| BOARD_AVB_KEY_PATH := external/avb/test/data/testkey_rsa4096.pem |
| endif |
| |
| # AVB signing for system_other.img. |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| ifdef BOARD_AVB_SYSTEM_OTHER_KEY_PATH |
| $(if $(BOARD_AVB_SYSTEM_OTHER_ALGORITHM),,$(error BOARD_AVB_SYSTEM_OTHER_ALGORITHM is not defined)) |
| else |
| # If key path isn't specified, use the same key as BOARD_AVB_KEY_PATH. |
| BOARD_AVB_SYSTEM_OTHER_KEY_PATH := $(BOARD_AVB_KEY_PATH) |
| BOARD_AVB_SYSTEM_OTHER_ALGORITHM := $(BOARD_AVB_ALGORITHM) |
| endif |
| |
| $(INSTALLED_PRODUCT_SYSTEM_OTHER_AVBKEY_TARGET): $(AVBTOOL) $(BOARD_AVB_SYSTEM_OTHER_KEY_PATH) |
| @echo Extracting system_other avb key: $@ |
| @rm -f $@ |
| @mkdir -p $(dir $@) |
| $(AVBTOOL) extract_public_key --key $(BOARD_AVB_SYSTEM_OTHER_KEY_PATH) --output $@ |
| |
| ifndef BOARD_AVB_SYSTEM_OTHER_ROLLBACK_INDEX |
| BOARD_AVB_SYSTEM_OTHER_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP) |
| endif |
| |
| BOARD_AVB_SYSTEM_OTHER_ADD_HASHTREE_FOOTER_ARGS += --rollback_index $(BOARD_AVB_SYSTEM_OTHER_ROLLBACK_INDEX) |
| endif # end of AVB for BUILDING_SYSTEM_OTHER_IMAGE |
| |
| INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES := \ |
| $(BOARD_AVB_VBMETA_SYSTEM) \ |
| $(BOARD_AVB_VBMETA_VENDOR) |
| |
| # Not allowing the same partition to appear in multiple groups. |
| ifneq ($(words $(sort $(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES))),$(words $(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES))) |
| $(error BOARD_AVB_VBMETA_SYSTEM and BOARD_AVB_VBMETA_VENDOR cannot have duplicates) |
| endif |
| |
| # When building a standalone recovery image for non-A/B devices, recovery image must be self-signed |
| # to be verified independently, and cannot be chained into vbmeta.img. See the link below for |
| # details. |
| ifeq ($(TARGET_OTA_ALLOW_NON_AB),true) |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(if $(BOARD_AVB_RECOVERY_KEY_PATH),,\ |
| $(error BOARD_AVB_RECOVERY_KEY_PATH must be defined for if non-A/B is supported. \ |
| See https://android.googlesource.com/platform/external/avb/+/master/README.md#booting-into-recovery)) |
| endif |
| endif |
| |
| # Appends os version and security patch level as a AVB property descriptor |
| |
| BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.system.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.system.os_version:$(PLATFORM_VERSION_LAST_STABLE) \ |
| --prop com.android.build.system.security_patch:$(PLATFORM_SECURITY_PATCH) |
| |
| BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.product.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.product.os_version:$(PLATFORM_VERSION_LAST_STABLE) \ |
| --prop com.android.build.product.security_patch:$(PLATFORM_SECURITY_PATCH) |
| |
| BOARD_AVB_SYSTEM_EXT_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.system_ext.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.system_ext.os_version:$(PLATFORM_VERSION_LAST_STABLE) \ |
| --prop com.android.build.system_ext.security_patch:$(PLATFORM_SECURITY_PATCH) |
| |
| BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.boot.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.boot.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.vendor_boot.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| |
| BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.recovery.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) |
| |
| BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.vendor.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.vendor.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.odm.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.odm.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_VENDOR_DLKM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.vendor_dlkm.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.vendor_dlkm.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_ODM_DLKM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.odm_dlkm.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.odm_dlkm.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.dtbo.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) |
| |
| BOARD_AVB_PVMFW_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.pvmfw.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) |
| |
| # The following vendor- and odm-specific images needs explicit SPL set per board. |
| ifdef BOOT_SECURITY_PATCH |
| BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.boot.security_patch:$(BOOT_SECURITY_PATCH) |
| endif |
| |
| ifdef VENDOR_SECURITY_PATCH |
| BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.vendor.security_patch:$(VENDOR_SECURITY_PATCH) |
| endif |
| |
| ifdef ODM_SECURITY_PATCH |
| BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.odm.security_patch:$(ODM_SECURITY_PATCH) |
| endif |
| |
| ifdef VENDOR_DLKM_SECURITY_PATCH |
| BOARD_AVB_VENDOR_DLKM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.vendor_dlkm.security_patch:$(VENDOR_DLKM_SECURITY_PATCH) |
| endif |
| |
| ifdef ODM_DLKM_SECURITY_PATCH |
| BOARD_AVB_ODM_DLKM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.odm_dlkm.security_patch:$(ODM_DLKM_SECURITY_PATCH) |
| endif |
| |
| ifdef PVMFW_SECURITY_PATCH |
| BOARD_AVB_PVMFW_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.pvmfw.security_patch:$(PVMFW_SECURITY_PATCH) |
| endif |
| |
| BOOT_FOOTER_ARGS := BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS |
| VENDOR_BOOT_FOOTER_ARGS := BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS |
| DTBO_FOOTER_ARGS := BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS |
| PVMFW_FOOTER_ARGS := BOARD_AVB_PVMFW_ADD_HASH_FOOTER_ARGS |
| SYSTEM_FOOTER_ARGS := BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS |
| VENDOR_FOOTER_ARGS := BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS |
| RECOVERY_FOOTER_ARGS := BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS |
| PRODUCT_FOOTER_ARGS := BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS |
| SYSTEM_EXT_FOOTER_ARGS := BOARD_AVB_SYSTEM_EXT_ADD_HASHTREE_FOOTER_ARGS |
| ODM_FOOTER_ARGS := BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS |
| VENDOR_DLKM_FOOTER_ARGS := BOARD_AVB_VENDOR_DLKM_ADD_HASHTREE_FOOTER_ARGS |
| ODM_DLKM_FOOTER_ARGS := BOARD_AVB_ODM_DLKM_ADD_HASHTREE_FOOTER_ARGS |
| |
| # Helper function that checks and sets required build variables for an AVB chained partition. |
| # $(1): the partition to enable AVB chain, e.g., boot or system or vbmeta_system. |
| define _check-and-set-avb-chain-args |
| $(eval part := $(1)) |
| $(eval PART=$(call to-upper,$(part))) |
| |
| $(eval _key_path := BOARD_AVB_$(PART)_KEY_PATH) |
| $(eval _signing_algorithm := BOARD_AVB_$(PART)_ALGORITHM) |
| $(eval _rollback_index := BOARD_AVB_$(PART)_ROLLBACK_INDEX) |
| $(eval _rollback_index_location := BOARD_AVB_$(PART)_ROLLBACK_INDEX_LOCATION) |
| $(if $($(_key_path)),,$(error $(_key_path) is not defined)) |
| $(if $($(_signing_algorithm)),,$(error $(_signing_algorithm) is not defined)) |
| $(if $($(_rollback_index)),,$(error $(_rollback_index) is not defined)) |
| $(if $($(_rollback_index_location)),,$(error $(_rollback_index_location) is not defined)) |
| |
| # Set INTERNAL_AVB_(PART)_SIGNING_ARGS |
| $(eval _signing_args := INTERNAL_AVB_$(PART)_SIGNING_ARGS) |
| $(eval $(_signing_args) := \ |
| --algorithm $($(_signing_algorithm)) --key $($(_key_path))) |
| |
| # The recovery partition in non-A/B devices should be verified separately. Skip adding the chain |
| # partition descriptor for recovery partition into vbmeta.img. |
| $(if $(or $(filter-out true,$(TARGET_OTA_ALLOW_NON_AB)),$(filter-out recovery,$(part))),\ |
| $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --chain_partition $(part):$($(_rollback_index_location)):$(AVB_CHAIN_KEY_DIR)/$(part).avbpubkey)) |
| |
| # Set rollback_index via footer args for non-chained vbmeta image. Chained vbmeta image will pick up |
| # the index via a separate flag (e.g. BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX). |
| $(if $(filter $(part),$(part:vbmeta_%=%)),\ |
| $(eval _footer_args := $(PART)_FOOTER_ARGS) \ |
| $(eval $($(_footer_args)) += --rollback_index $($(_rollback_index)))) |
| endef |
| |
| # Checks and sets the required build variables for an AVB partition. The partition will be |
| # configured as a chained partition, if BOARD_AVB_<partition>_KEY_PATH is defined. Otherwise the |
| # image descriptor will be included into vbmeta.img, unless it has been already added to any chained |
| # VBMeta image. |
| # Multiple boot images can be generated based on BOARD_KERNEL_BINARIES |
| # but vbmeta would capture the image descriptor of only the first boot |
| # image specified in BUILT_BOOTIMAGE_TARGET. |
| # $(1): Partition name, e.g. boot or system. |
| define check-and-set-avb-args |
| $(eval _in_chained_vbmeta := $(filter $(1),$(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES))) |
| $(if $(BOARD_AVB_$(call to-upper,$(1))_KEY_PATH),\ |
| $(if $(_in_chained_vbmeta),\ |
| $(error Chaining partition "$(1)" in chained VBMeta image is not supported)) \ |
| $(call _check-and-set-avb-chain-args,$(1)),\ |
| $(if $(_in_chained_vbmeta),,\ |
| $(if $(filter boot,$(1)),\ |
| $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --include_descriptors_from_image $(firstword $(call images-for-partitions,$(1)))),\ |
| $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --include_descriptors_from_image $(call images-for-partitions,$(1)))))) |
| endef |
| |
| # Checks and sets build variables for a custom chained partition to include it into vbmeta.img. |
|
