| # |
| # Copyright (C) 2018 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| import copy |
| import os |
| import os.path |
| import zipfile |
| |
| import common |
| import test_utils |
| from ota_from_target_files import ( |
| _LoadOemDicts, AbOtaPropertyFiles, FinalizeMetadata, |
| GetPackageMetadata, GetTargetFilesZipForSecondaryImages, |
| GetTargetFilesZipWithoutPostinstallConfig, NonAbOtaPropertyFiles, |
| Payload, PayloadSigner, POSTINSTALL_CONFIG, PropertyFiles, |
| StreamingPropertyFiles, WriteFingerprintAssertion, |
| CalculateRuntimeDevicesAndFingerprints) |
| |
| |
| def construct_target_files(secondary=False): |
| """Returns a target-files.zip file for generating OTA packages.""" |
| target_files = common.MakeTempFile(prefix='target_files-', suffix='.zip') |
| with zipfile.ZipFile(target_files, 'w') as target_files_zip: |
| # META/update_engine_config.txt |
| target_files_zip.writestr( |
| 'META/update_engine_config.txt', |
| "PAYLOAD_MAJOR_VERSION=2\nPAYLOAD_MINOR_VERSION=4\n") |
| |
| # META/postinstall_config.txt |
| target_files_zip.writestr( |
| POSTINSTALL_CONFIG, |
| '\n'.join([ |
| "RUN_POSTINSTALL_system=true", |
| "POSTINSTALL_PATH_system=system/bin/otapreopt_script", |
| "FILESYSTEM_TYPE_system=ext4", |
| "POSTINSTALL_OPTIONAL_system=true", |
| ])) |
| |
| ab_partitions = [ |
| ('IMAGES', 'boot'), |
| ('IMAGES', 'system'), |
| ('IMAGES', 'vendor'), |
| ('RADIO', 'bootloader'), |
| ('RADIO', 'modem'), |
| ] |
| # META/ab_partitions.txt |
| target_files_zip.writestr( |
| 'META/ab_partitions.txt', |
| '\n'.join([partition[1] for partition in ab_partitions])) |
| |
| # Create dummy images for each of them. |
| for path, partition in ab_partitions: |
| target_files_zip.writestr( |
| '{}/{}.img'.format(path, partition), |
| os.urandom(len(partition))) |
| |
| # system_other shouldn't appear in META/ab_partitions.txt. |
| if secondary: |
| target_files_zip.writestr('IMAGES/system_other.img', |
| os.urandom(len("system_other"))) |
| |
| return target_files |
| |
| |
| class LoadOemDictsTest(test_utils.ReleaseToolsTestCase): |
| |
| def test_NoneDict(self): |
| self.assertIsNone(_LoadOemDicts(None)) |
| |
| def test_SingleDict(self): |
| dict_file = common.MakeTempFile() |
| with open(dict_file, 'w') as dict_fp: |
| dict_fp.write('abc=1\ndef=2\nxyz=foo\na.b.c=bar\n') |
| |
| oem_dicts = _LoadOemDicts([dict_file]) |
| self.assertEqual(1, len(oem_dicts)) |
| self.assertEqual('foo', oem_dicts[0]['xyz']) |
| self.assertEqual('bar', oem_dicts[0]['a.b.c']) |
| |
| def test_MultipleDicts(self): |
| oem_source = [] |
| for i in range(3): |
| dict_file = common.MakeTempFile() |
| with open(dict_file, 'w') as dict_fp: |
| dict_fp.write( |
| 'ro.build.index={}\ndef=2\nxyz=foo\na.b.c=bar\n'.format(i)) |
| oem_source.append(dict_file) |
| |
| oem_dicts = _LoadOemDicts(oem_source) |
| self.assertEqual(3, len(oem_dicts)) |
| for i, oem_dict in enumerate(oem_dicts): |
| self.assertEqual('2', oem_dict['def']) |
| self.assertEqual('foo', oem_dict['xyz']) |
| self.assertEqual('bar', oem_dict['a.b.c']) |
| self.assertEqual('{}'.format(i), oem_dict['ro.build.index']) |
| |
| |
| class OtaFromTargetFilesTest(test_utils.ReleaseToolsTestCase): |
| TEST_TARGET_INFO_DICT = { |
| 'build.prop': common.PartitionBuildProps.FromDictionary( |
| 'system', { |
| 'ro.product.device': 'product-device', |
| 'ro.build.fingerprint': 'build-fingerprint-target', |
| 'ro.build.version.incremental': 'build-version-incremental-target', |
| 'ro.build.version.sdk': '27', |
| 'ro.build.version.security_patch': '2017-12-01', |
| 'ro.build.date.utc': '1500000000'} |
| ) |
| } |
| |
| TEST_SOURCE_INFO_DICT = { |
| 'build.prop': common.PartitionBuildProps.FromDictionary( |
| 'system', { |
| 'ro.product.device': 'product-device', |
| 'ro.build.fingerprint': 'build-fingerprint-source', |
| 'ro.build.version.incremental': 'build-version-incremental-source', |
| 'ro.build.version.sdk': '25', |
| 'ro.build.version.security_patch': '2016-12-01', |
| 'ro.build.date.utc': '1400000000'} |
| ) |
| } |
| |
| TEST_INFO_DICT_USES_OEM_PROPS = { |
| 'build.prop': common.PartitionBuildProps.FromDictionary( |
| 'system', { |
| 'ro.product.name': 'product-name', |
| 'ro.build.thumbprint': 'build-thumbprint', |
| 'ro.build.bar': 'build-bar'} |
| ), |
| 'vendor.build.prop': common.PartitionBuildProps.FromDictionary( |
| 'vendor', { |
| 'ro.vendor.build.fingerprint': 'vendor-build-fingerprint'} |
| ), |
| 'property1': 'value1', |
| 'property2': 4096, |
| 'oem_fingerprint_properties': 'ro.product.device ro.product.brand', |
| } |
| |
| TEST_OEM_DICTS = [ |
| { |
| 'ro.product.brand': 'brand1', |
| 'ro.product.device': 'device1', |
| }, |
| { |
| 'ro.product.brand': 'brand2', |
| 'ro.product.device': 'device2', |
| }, |
| { |
| 'ro.product.brand': 'brand3', |
| 'ro.product.device': 'device3', |
| }, |
| ] |
| |
| def setUp(self): |
| self.testdata_dir = test_utils.get_testdata_dir() |
| self.assertTrue(os.path.exists(self.testdata_dir)) |
| |
| # Reset the global options as in ota_from_target_files.py. |
| common.OPTIONS.incremental_source = None |
| common.OPTIONS.downgrade = False |
| common.OPTIONS.retrofit_dynamic_partitions = False |
| common.OPTIONS.timestamp = False |
| common.OPTIONS.wipe_user_data = False |
| common.OPTIONS.no_signing = False |
| common.OPTIONS.package_key = os.path.join(self.testdata_dir, 'testkey') |
| common.OPTIONS.key_passwords = { |
| common.OPTIONS.package_key : None, |
| } |
| |
| common.OPTIONS.search_path = test_utils.get_search_path() |
| |
| def test_GetPackageMetadata_abOta_full(self): |
| target_info_dict = copy.deepcopy(self.TEST_TARGET_INFO_DICT) |
| target_info_dict['ab_update'] = 'true' |
| target_info = common.BuildInfo(target_info_dict, None) |
| metadata = GetPackageMetadata(target_info) |
| self.assertDictEqual( |
| { |
| 'ota-type' : 'AB', |
| 'ota-required-cache' : '0', |
| 'post-build' : 'build-fingerprint-target', |
| 'post-build-incremental' : 'build-version-incremental-target', |
| 'post-sdk-level' : '27', |
| 'post-security-patch-level' : '2017-12-01', |
| 'post-timestamp' : '1500000000', |
| 'pre-device' : 'product-device', |
| }, |
| metadata) |
| |
| def test_GetPackageMetadata_abOta_incremental(self): |
| target_info_dict = copy.deepcopy(self.TEST_TARGET_INFO_DICT) |
| target_info_dict['ab_update'] = 'true' |
| target_info = common.BuildInfo(target_info_dict, None) |
| source_info = common.BuildInfo(self.TEST_SOURCE_INFO_DICT, None) |
| common.OPTIONS.incremental_source = '' |
| metadata = GetPackageMetadata(target_info, source_info) |
| self.assertDictEqual( |
| { |
| 'ota-type' : 'AB', |
| 'ota-required-cache' : '0', |
| 'post-build' : 'build-fingerprint-target', |
| 'post-build-incremental' : 'build-version-incremental-target', |
| 'post-sdk-level' : '27', |
| 'post-security-patch-level' : '2017-12-01', |
| 'post-timestamp' : '1500000000', |
| 'pre-device' : 'product-device', |
| 'pre-build' : 'build-fingerprint-source', |
| 'pre-build-incremental' : 'build-version-incremental-source', |
| }, |
| metadata) |
| |
| def test_GetPackageMetadata_nonAbOta_full(self): |
| target_info = common.BuildInfo(self.TEST_TARGET_INFO_DICT, None) |
| metadata = GetPackageMetadata(target_info) |
| self.assertDictEqual( |
| { |
| 'ota-type' : 'BLOCK', |
| 'post-build' : 'build-fingerprint-target', |
| 'post-build-incremental' : 'build-version-incremental-target', |
| 'post-sdk-level' : '27', |
| 'post-security-patch-level' : '2017-12-01', |
| 'post-timestamp' : '1500000000', |
| 'pre-device' : 'product-device', |
| }, |
| metadata) |
| |
| def test_GetPackageMetadata_nonAbOta_incremental(self): |
| target_info = common.BuildInfo(self.TEST_TARGET_INFO_DICT, None) |
| source_info = common.BuildInfo(self.TEST_SOURCE_INFO_DICT, None) |
| common.OPTIONS.incremental_source = '' |
| metadata = GetPackageMetadata(target_info, source_info) |
| self.assertDictEqual( |
| { |
| 'ota-type' : 'BLOCK', |
| 'post-build' : 'build-fingerprint-target', |
| 'post-build-incremental' : 'build-version-incremental-target', |
| 'post-sdk-level' : '27', |
| 'post-security-patch-level' : '2017-12-01', |
| 'post-timestamp' : '1500000000', |
| 'pre-device' : 'product-device', |
| 'pre-build' : 'build-fingerprint-source', |
| 'pre-build-incremental' : 'build-version-incremental-source', |
| }, |
| metadata) |
| |
| def test_GetPackageMetadata_wipe(self): |
| target_info = common.BuildInfo(self.TEST_TARGET_INFO_DICT, None) |
| common.OPTIONS.wipe_user_data = True |
| metadata = GetPackageMetadata(target_info) |
| self.assertDictEqual( |
| { |
| 'ota-type' : 'BLOCK', |
| 'ota-wipe' : 'yes', |
| 'post-build' : 'build-fingerprint-target', |
| 'post-build-incremental' : 'build-version-incremental-target', |
| 'post-sdk-level' : '27', |
| 'post-security-patch-level' : '2017-12-01', |
| 'post-timestamp' : '1500000000', |
| 'pre-device' : 'product-device', |
| }, |
| metadata) |
| |
| def test_GetPackageMetadata_retrofitDynamicPartitions(self): |
| target_info = common.BuildInfo(self.TEST_TARGET_INFO_DICT, None) |
| common.OPTIONS.retrofit_dynamic_partitions = True |
| metadata = GetPackageMetadata(target_info) |
| self.assertDictEqual( |
| { |
| 'ota-retrofit-dynamic-partitions' : 'yes', |
| 'ota-type' : 'BLOCK', |
| 'post-build' : 'build-fingerprint-target', |
| 'post-build-incremental' : 'build-version-incremental-target', |
| 'post-sdk-level' : '27', |
| 'post-security-patch-level' : '2017-12-01', |
| 'post-timestamp' : '1500000000', |
| 'pre-device' : 'product-device', |
| }, |
| metadata) |
| |
| @staticmethod |
| def _test_GetPackageMetadata_swapBuildTimestamps(target_info, source_info): |
| (target_info['build.prop'].build_props['ro.build.date.utc'], |
| source_info['build.prop'].build_props['ro.build.date.utc']) = ( |
| source_info['build.prop'].build_props['ro.build.date.utc'], |
| target_info['build.prop'].build_props['ro.build.date.utc']) |
| |
| def test_GetPackageMetadata_unintentionalDowngradeDetected(self): |
| target_info_dict = copy.deepcopy(self.TEST_TARGET_INFO_DICT) |
| source_info_dict = copy.deepcopy(self.TEST_SOURCE_INFO_DICT) |
| self._test_GetPackageMetadata_swapBuildTimestamps( |
| target_info_dict, source_info_dict) |
| |
| target_info = common.BuildInfo(target_info_dict, None) |
| source_info = common.BuildInfo(source_info_dict, None) |
| common.OPTIONS.incremental_source = '' |
| self.assertRaises(RuntimeError, GetPackageMetadata, target_info, |
| source_info) |
| |
| def test_GetPackageMetadata_downgrade(self): |
| target_info_dict = copy.deepcopy(self.TEST_TARGET_INFO_DICT) |
| source_info_dict = copy.deepcopy(self.TEST_SOURCE_INFO_DICT) |
| self._test_GetPackageMetadata_swapBuildTimestamps( |
| target_info_dict, source_info_dict) |
| |
| target_info = common.BuildInfo(target_info_dict, None) |
| source_info = common.BuildInfo(source_info_dict, None) |
| common.OPTIONS.incremental_source = '' |
| common.OPTIONS.downgrade = True |
| common.OPTIONS.wipe_user_data = True |
| metadata = GetPackageMetadata(target_info, source_info) |
| self.assertDictEqual( |
| { |
| 'ota-downgrade' : 'yes', |
| 'ota-type' : 'BLOCK', |
| 'ota-wipe' : 'yes', |
| 'post-build' : 'build-fingerprint-target', |
| 'post-build-incremental' : 'build-version-incremental-target', |
| 'post-sdk-level' : '27', |
| 'post-security-patch-level' : '2017-12-01', |
| 'post-timestamp' : '1400000000', |
| 'pre-device' : 'product-device', |
| 'pre-build' : 'build-fingerprint-source', |
| 'pre-build-incremental' : 'build-version-incremental-source', |
| }, |
| metadata) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_GetTargetFilesZipForSecondaryImages(self): |
| input_file = construct_target_files(secondary=True) |
| target_file = GetTargetFilesZipForSecondaryImages(input_file) |
| |
| with zipfile.ZipFile(target_file) as verify_zip: |
| namelist = verify_zip.namelist() |
| ab_partitions = verify_zip.read('META/ab_partitions.txt').decode() |
| |
| self.assertIn('META/ab_partitions.txt', namelist) |
| self.assertIn('IMAGES/system.img', namelist) |
| self.assertIn('RADIO/bootloader.img', namelist) |
| self.assertIn(POSTINSTALL_CONFIG, namelist) |
| |
| self.assertNotIn('IMAGES/boot.img', namelist) |
| self.assertNotIn('IMAGES/system_other.img', namelist) |
| self.assertNotIn('IMAGES/system.map', namelist) |
| self.assertNotIn('RADIO/modem.img', namelist) |
| |
| expected_ab_partitions = ['system', 'bootloader'] |
| self.assertEqual('\n'.join(expected_ab_partitions), ab_partitions) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_GetTargetFilesZipForSecondaryImages_skipPostinstall(self): |
| input_file = construct_target_files(secondary=True) |
| target_file = GetTargetFilesZipForSecondaryImages( |
| input_file, skip_postinstall=True) |
| |
| with zipfile.ZipFile(target_file) as verify_zip: |
| namelist = verify_zip.namelist() |
| |
| self.assertIn('META/ab_partitions.txt', namelist) |
| self.assertIn('IMAGES/system.img', namelist) |
| self.assertIn('RADIO/bootloader.img', namelist) |
| |
| self.assertNotIn('IMAGES/boot.img', namelist) |
| self.assertNotIn('IMAGES/system_other.img', namelist) |
| self.assertNotIn('IMAGES/system.map', namelist) |
| self.assertNotIn('RADIO/modem.img', namelist) |
| self.assertNotIn(POSTINSTALL_CONFIG, namelist) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_GetTargetFilesZipForSecondaryImages_withoutRadioImages(self): |
| input_file = construct_target_files(secondary=True) |
| common.ZipDelete(input_file, 'RADIO/bootloader.img') |
| common.ZipDelete(input_file, 'RADIO/modem.img') |
| target_file = GetTargetFilesZipForSecondaryImages(input_file) |
| |
| with zipfile.ZipFile(target_file) as verify_zip: |
| namelist = verify_zip.namelist() |
| |
| self.assertIn('META/ab_partitions.txt', namelist) |
| self.assertIn('IMAGES/system.img', namelist) |
| self.assertIn(POSTINSTALL_CONFIG, namelist) |
| |
| self.assertNotIn('IMAGES/boot.img', namelist) |
| self.assertNotIn('IMAGES/system_other.img', namelist) |
| self.assertNotIn('IMAGES/system.map', namelist) |
| self.assertNotIn('RADIO/bootloader.img', namelist) |
| self.assertNotIn('RADIO/modem.img', namelist) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_GetTargetFilesZipForSecondaryImages_dynamicPartitions(self): |
| input_file = construct_target_files(secondary=True) |
| misc_info = '\n'.join([ |
| 'use_dynamic_partition_size=true', |
| 'use_dynamic_partitions=true', |
| 'dynamic_partition_list=system vendor product', |
| 'super_partition_groups=google_dynamic_partitions', |
| 'super_google_dynamic_partitions_group_size=4873781248', |
| 'super_google_dynamic_partitions_partition_list=system vendor product', |
| ]) |
| dynamic_partitions_info = '\n'.join([ |
| 'super_partition_groups=google_dynamic_partitions', |
| 'super_google_dynamic_partitions_group_size=4873781248', |
| 'super_google_dynamic_partitions_partition_list=system vendor product', |
| ]) |
| |
| with zipfile.ZipFile(input_file, 'a') as append_zip: |
| common.ZipWriteStr(append_zip, 'META/misc_info.txt', misc_info) |
| common.ZipWriteStr(append_zip, 'META/dynamic_partitions_info.txt', |
| dynamic_partitions_info) |
| |
| target_file = GetTargetFilesZipForSecondaryImages(input_file) |
| |
| with zipfile.ZipFile(target_file) as verify_zip: |
| namelist = verify_zip.namelist() |
| updated_misc_info = verify_zip.read('META/misc_info.txt').decode() |
| updated_dynamic_partitions_info = verify_zip.read( |
| 'META/dynamic_partitions_info.txt').decode() |
| |
| self.assertIn('META/ab_partitions.txt', namelist) |
| self.assertIn('IMAGES/system.img', namelist) |
| self.assertIn(POSTINSTALL_CONFIG, namelist) |
| self.assertIn('META/misc_info.txt', namelist) |
| self.assertIn('META/dynamic_partitions_info.txt', namelist) |
| |
| self.assertNotIn('IMAGES/boot.img', namelist) |
| self.assertNotIn('IMAGES/system_other.img', namelist) |
| self.assertNotIn('IMAGES/system.map', namelist) |
| |
| # Check the vendor & product are removed from the partitions list. |
| expected_misc_info = misc_info.replace('system vendor product', |
| 'system') |
| expected_dynamic_partitions_info = dynamic_partitions_info.replace( |
| 'system vendor product', 'system') |
| self.assertEqual(expected_misc_info, updated_misc_info) |
| self.assertEqual(expected_dynamic_partitions_info, |
| updated_dynamic_partitions_info) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_GetTargetFilesZipWithoutPostinstallConfig(self): |
| input_file = construct_target_files() |
| target_file = GetTargetFilesZipWithoutPostinstallConfig(input_file) |
| with zipfile.ZipFile(target_file) as verify_zip: |
| self.assertNotIn(POSTINSTALL_CONFIG, verify_zip.namelist()) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_GetTargetFilesZipWithoutPostinstallConfig_missingEntry(self): |
| input_file = construct_target_files() |
| common.ZipDelete(input_file, POSTINSTALL_CONFIG) |
| target_file = GetTargetFilesZipWithoutPostinstallConfig(input_file) |
| with zipfile.ZipFile(target_file) as verify_zip: |
| self.assertNotIn(POSTINSTALL_CONFIG, verify_zip.namelist()) |
| |
| def _test_FinalizeMetadata(self, large_entry=False): |
| entries = [ |
| 'required-entry1', |
| 'required-entry2', |
| ] |
| zip_file = PropertyFilesTest.construct_zip_package(entries) |
| # Add a large entry of 1 GiB if requested. |
| if large_entry: |
| with zipfile.ZipFile(zip_file, 'a') as zip_fp: |
| zip_fp.writestr( |
| # Using 'zoo' so that the entry stays behind others after signing. |
| 'zoo', |
| 'A' * 1024 * 1024 * 1024, |
| zipfile.ZIP_STORED) |
| |
| metadata = {} |
| output_file = common.MakeTempFile(suffix='.zip') |
| needed_property_files = ( |
| TestPropertyFiles(), |
| ) |
| FinalizeMetadata(metadata, zip_file, output_file, needed_property_files) |
| self.assertIn('ota-test-property-files', metadata) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_FinalizeMetadata(self): |
| self._test_FinalizeMetadata() |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_FinalizeMetadata_withNoSigning(self): |
| common.OPTIONS.no_signing = True |
| self._test_FinalizeMetadata() |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_FinalizeMetadata_largeEntry(self): |
| self._test_FinalizeMetadata(large_entry=True) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_FinalizeMetadata_largeEntry_withNoSigning(self): |
| common.OPTIONS.no_signing = True |
| self._test_FinalizeMetadata(large_entry=True) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_FinalizeMetadata_insufficientSpace(self): |
| entries = [ |
| 'required-entry1', |
| 'required-entry2', |
| 'optional-entry1', |
| 'optional-entry2', |
| ] |
| zip_file = PropertyFilesTest.construct_zip_package(entries) |
| with zipfile.ZipFile(zip_file, 'a') as zip_fp: |
| zip_fp.writestr( |
| # 'foo-entry1' will appear ahead of all other entries (in alphabetical |
| # order) after the signing, which will in turn trigger the |
| # InsufficientSpaceException and an automatic retry. |
| 'foo-entry1', |
| 'A' * 1024 * 1024, |
| zipfile.ZIP_STORED) |
| |
| metadata = {} |
| needed_property_files = ( |
| TestPropertyFiles(), |
| ) |
| output_file = common.MakeTempFile(suffix='.zip') |
| FinalizeMetadata(metadata, zip_file, output_file, needed_property_files) |
| self.assertIn('ota-test-property-files', metadata) |
| |
| def test_WriteFingerprintAssertion_without_oem_props(self): |
| target_info = common.BuildInfo(self.TEST_TARGET_INFO_DICT, None) |
| source_info_dict = copy.deepcopy(self.TEST_TARGET_INFO_DICT) |
| source_info_dict['build.prop'].build_props['ro.build.fingerprint'] = ( |
| 'source-build-fingerprint') |
| source_info = common.BuildInfo(source_info_dict, None) |
| |
| script_writer = test_utils.MockScriptWriter() |
| WriteFingerprintAssertion(script_writer, target_info, source_info) |
| self.assertEqual( |
| [('AssertSomeFingerprint', 'source-build-fingerprint', |
| 'build-fingerprint-target')], |
| script_writer.lines) |
| |
| def test_WriteFingerprintAssertion_with_source_oem_props(self): |
| target_info = common.BuildInfo(self.TEST_TARGET_INFO_DICT, None) |
| source_info = common.BuildInfo(self.TEST_INFO_DICT_USES_OEM_PROPS, |
| self.TEST_OEM_DICTS) |
| |
| script_writer = test_utils.MockScriptWriter() |
| WriteFingerprintAssertion(script_writer, target_info, source_info) |
| self.assertEqual( |
| [('AssertFingerprintOrThumbprint', 'build-fingerprint-target', |
| 'build-thumbprint')], |
| script_writer.lines) |
| |
| def test_WriteFingerprintAssertion_with_target_oem_props(self): |
| target_info = common.BuildInfo(self.TEST_INFO_DICT_USES_OEM_PROPS, |
| self.TEST_OEM_DICTS) |
| source_info = common.BuildInfo(self.TEST_TARGET_INFO_DICT, None) |
| |
| script_writer = test_utils.MockScriptWriter() |
| WriteFingerprintAssertion(script_writer, target_info, source_info) |
| self.assertEqual( |
| [('AssertFingerprintOrThumbprint', 'build-fingerprint-target', |
| 'build-thumbprint')], |
| script_writer.lines) |
| |
| def test_WriteFingerprintAssertion_with_both_oem_props(self): |
| target_info = common.BuildInfo(self.TEST_INFO_DICT_USES_OEM_PROPS, |
| self.TEST_OEM_DICTS) |
| source_info_dict = copy.deepcopy(self.TEST_INFO_DICT_USES_OEM_PROPS) |
| source_info_dict['build.prop'].build_props['ro.build.thumbprint'] = ( |
| 'source-build-thumbprint') |
| source_info = common.BuildInfo(source_info_dict, self.TEST_OEM_DICTS) |
| |
| script_writer = test_utils.MockScriptWriter() |
| WriteFingerprintAssertion(script_writer, target_info, source_info) |
| self.assertEqual( |
| [('AssertSomeThumbprint', 'build-thumbprint', |
| 'source-build-thumbprint')], |
| script_writer.lines) |
| |
| |
| class TestPropertyFiles(PropertyFiles): |
| """A class that extends PropertyFiles for testing purpose.""" |
| |
| def __init__(self): |
| super(TestPropertyFiles, self).__init__() |
| self.name = 'ota-test-property-files' |
| self.required = ( |
| 'required-entry1', |
| 'required-entry2', |
| ) |
| self.optional = ( |
| 'optional-entry1', |
| 'optional-entry2', |
| ) |
| |
| |
| class PropertyFilesTest(test_utils.ReleaseToolsTestCase): |
| |
| def setUp(self): |
| common.OPTIONS.no_signing = False |
| |
| @staticmethod |
| def construct_zip_package(entries): |
| zip_file = common.MakeTempFile(suffix='.zip') |
| with zipfile.ZipFile(zip_file, 'w') as zip_fp: |
| for entry in entries: |
| zip_fp.writestr( |
| entry, |
| entry.replace('.', '-').upper(), |
| zipfile.ZIP_STORED) |
| return zip_file |
| |
| @staticmethod |
| def _parse_property_files_string(data): |
| result = {} |
| for token in data.split(','): |
| name, info = token.split(':', 1) |
| result[name] = info |
| return result |
| |
| def _verify_entries(self, input_file, tokens, entries): |
| for entry in entries: |
| offset, size = map(int, tokens[entry].split(':')) |
| with open(input_file, 'rb') as input_fp: |
| input_fp.seek(offset) |
| if entry == 'metadata': |
| expected = b'META-INF/COM/ANDROID/METADATA' |
| else: |
| expected = entry.replace('.', '-').upper().encode() |
| self.assertEqual(expected, input_fp.read(size)) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Compute(self): |
| entries = ( |
| 'required-entry1', |
| 'required-entry2', |
| ) |
| zip_file = self.construct_zip_package(entries) |
| property_files = TestPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| property_files_string = property_files.Compute(zip_fp) |
| |
| tokens = self._parse_property_files_string(property_files_string) |
| self.assertEqual(3, len(tokens)) |
| self._verify_entries(zip_file, tokens, entries) |
| |
| def test_Compute_withOptionalEntries(self): |
| entries = ( |
| 'required-entry1', |
| 'required-entry2', |
| 'optional-entry1', |
| 'optional-entry2', |
| ) |
| zip_file = self.construct_zip_package(entries) |
| property_files = TestPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| property_files_string = property_files.Compute(zip_fp) |
| |
| tokens = self._parse_property_files_string(property_files_string) |
| self.assertEqual(5, len(tokens)) |
| self._verify_entries(zip_file, tokens, entries) |
| |
| def test_Compute_missingRequiredEntry(self): |
| entries = ( |
| 'required-entry2', |
| ) |
| zip_file = self.construct_zip_package(entries) |
| property_files = TestPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| self.assertRaises(KeyError, property_files.Compute, zip_fp) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Finalize(self): |
| entries = [ |
| 'required-entry1', |
| 'required-entry2', |
| 'META-INF/com/android/metadata', |
| ] |
| zip_file = self.construct_zip_package(entries) |
| property_files = TestPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| raw_metadata = property_files.GetPropertyFilesString( |
| zip_fp, reserve_space=False) |
| streaming_metadata = property_files.Finalize(zip_fp, len(raw_metadata)) |
| tokens = self._parse_property_files_string(streaming_metadata) |
| |
| self.assertEqual(3, len(tokens)) |
| # 'META-INF/com/android/metadata' will be key'd as 'metadata' in the |
| # streaming metadata. |
| entries[2] = 'metadata' |
| self._verify_entries(zip_file, tokens, entries) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Finalize_assertReservedLength(self): |
| entries = ( |
| 'required-entry1', |
| 'required-entry2', |
| 'optional-entry1', |
| 'optional-entry2', |
| 'META-INF/com/android/metadata', |
| ) |
| zip_file = self.construct_zip_package(entries) |
| property_files = TestPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| # First get the raw metadata string (i.e. without padding space). |
| raw_metadata = property_files.GetPropertyFilesString( |
| zip_fp, reserve_space=False) |
| raw_length = len(raw_metadata) |
| |
| # Now pass in the exact expected length. |
| streaming_metadata = property_files.Finalize(zip_fp, raw_length) |
| self.assertEqual(raw_length, len(streaming_metadata)) |
| |
| # Or pass in insufficient length. |
| self.assertRaises( |
| PropertyFiles.InsufficientSpaceException, |
| property_files.Finalize, |
| zip_fp, |
| raw_length - 1) |
| |
| # Or pass in a much larger size. |
| streaming_metadata = property_files.Finalize( |
| zip_fp, |
| raw_length + 20) |
| self.assertEqual(raw_length + 20, len(streaming_metadata)) |
| self.assertEqual(' ' * 20, streaming_metadata[raw_length:]) |
| |
| def test_Verify(self): |
| entries = ( |
| 'required-entry1', |
| 'required-entry2', |
| 'optional-entry1', |
| 'optional-entry2', |
| 'META-INF/com/android/metadata', |
| ) |
| zip_file = self.construct_zip_package(entries) |
| property_files = TestPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| # First get the raw metadata string (i.e. without padding space). |
| raw_metadata = property_files.GetPropertyFilesString( |
| zip_fp, reserve_space=False) |
| |
| # Should pass the test if verification passes. |
| property_files.Verify(zip_fp, raw_metadata) |
| |
| # Or raise on verification failure. |
| self.assertRaises( |
| AssertionError, property_files.Verify, zip_fp, raw_metadata + 'x') |
| |
| |
| class StreamingPropertyFilesTest(PropertyFilesTest): |
| """Additional sanity checks specialized for StreamingPropertyFiles.""" |
| |
| def test_init(self): |
| property_files = StreamingPropertyFiles() |
| self.assertEqual('ota-streaming-property-files', property_files.name) |
| self.assertEqual( |
| ( |
| 'payload.bin', |
| 'payload_properties.txt', |
| ), |
| property_files.required) |
| self.assertEqual( |
| ( |
| 'care_map.pb', |
| 'care_map.txt', |
| 'compatibility.zip', |
| ), |
| property_files.optional) |
| |
| def test_Compute(self): |
| entries = ( |
| 'payload.bin', |
| 'payload_properties.txt', |
| 'care_map.txt', |
| 'compatibility.zip', |
| ) |
| zip_file = self.construct_zip_package(entries) |
| property_files = StreamingPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| property_files_string = property_files.Compute(zip_fp) |
| |
| tokens = self._parse_property_files_string(property_files_string) |
| self.assertEqual(5, len(tokens)) |
| self._verify_entries(zip_file, tokens, entries) |
| |
| def test_Finalize(self): |
| entries = [ |
| 'payload.bin', |
| 'payload_properties.txt', |
| 'care_map.txt', |
| 'compatibility.zip', |
| 'META-INF/com/android/metadata', |
| ] |
| zip_file = self.construct_zip_package(entries) |
| property_files = StreamingPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| raw_metadata = property_files.GetPropertyFilesString( |
| zip_fp, reserve_space=False) |
| streaming_metadata = property_files.Finalize(zip_fp, len(raw_metadata)) |
| tokens = self._parse_property_files_string(streaming_metadata) |
| |
| self.assertEqual(5, len(tokens)) |
| # 'META-INF/com/android/metadata' will be key'd as 'metadata' in the |
| # streaming metadata. |
| entries[4] = 'metadata' |
| self._verify_entries(zip_file, tokens, entries) |
| |
| def test_Verify(self): |
| entries = ( |
| 'payload.bin', |
| 'payload_properties.txt', |
| 'care_map.txt', |
| 'compatibility.zip', |
| 'META-INF/com/android/metadata', |
| ) |
| zip_file = self.construct_zip_package(entries) |
| property_files = StreamingPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| # First get the raw metadata string (i.e. without padding space). |
| raw_metadata = property_files.GetPropertyFilesString( |
| zip_fp, reserve_space=False) |
| |
| # Should pass the test if verification passes. |
| property_files.Verify(zip_fp, raw_metadata) |
| |
| # Or raise on verification failure. |
| self.assertRaises( |
| AssertionError, property_files.Verify, zip_fp, raw_metadata + 'x') |
| |
| |
| class AbOtaPropertyFilesTest(PropertyFilesTest): |
| """Additional sanity checks specialized for AbOtaPropertyFiles.""" |
| |
| # The size for payload and metadata signature size. |
| SIGNATURE_SIZE = 256 |
| |
| def setUp(self): |
| self.testdata_dir = test_utils.get_testdata_dir() |
| self.assertTrue(os.path.exists(self.testdata_dir)) |
| |
| common.OPTIONS.wipe_user_data = False |
| common.OPTIONS.payload_signer = None |
| common.OPTIONS.payload_signer_args = None |
| common.OPTIONS.package_key = os.path.join(self.testdata_dir, 'testkey') |
| common.OPTIONS.key_passwords = { |
| common.OPTIONS.package_key : None, |
| } |
| |
| def test_init(self): |
| property_files = AbOtaPropertyFiles() |
| self.assertEqual('ota-property-files', property_files.name) |
| self.assertEqual( |
| ( |
| 'payload.bin', |
| 'payload_properties.txt', |
| ), |
| property_files.required) |
| self.assertEqual( |
| ( |
| 'care_map.pb', |
| 'care_map.txt', |
| 'compatibility.zip', |
| ), |
| property_files.optional) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_GetPayloadMetadataOffsetAndSize(self): |
| target_file = construct_target_files() |
| payload = Payload() |
| payload.Generate(target_file) |
| |
| payload_signer = PayloadSigner() |
| payload.Sign(payload_signer) |
| |
| output_file = common.MakeTempFile(suffix='.zip') |
| with zipfile.ZipFile(output_file, 'w') as output_zip: |
| payload.WriteToZip(output_zip) |
| |
| # Find out the payload metadata offset and size. |
| property_files = AbOtaPropertyFiles() |
| with zipfile.ZipFile(output_file) as input_zip: |
| # pylint: disable=protected-access |
| payload_offset, metadata_total = ( |
| property_files._GetPayloadMetadataOffsetAndSize(input_zip)) |
| |
| # The signature proto has the following format (details in |
| # /platform/system/update_engine/update_metadata.proto): |
| # message Signature { |
| # optional uint32 version = 1; |
| # optional bytes data = 2; |
| # optional fixed32 unpadded_signature_size = 3; |
| # } |
| # |
| # According to the protobuf encoding, the tail of the signature message will |
| # be [signature string(256 bytes) + encoding of the fixed32 number 256]. And |
| # 256 is encoded as 'x1d\x00\x01\x00\x00': |
| # [3 (field number) << 3 | 5 (type) + byte reverse of 0x100 (256)]. |
| # Details in (https://developers.google.com/protocol-buffers/docs/encoding) |
| signature_tail_length = self.SIGNATURE_SIZE + 5 |
| self.assertGreater(metadata_total, signature_tail_length) |
| with open(output_file, 'rb') as verify_fp: |
| verify_fp.seek(payload_offset + metadata_total - signature_tail_length) |
| metadata_signature_proto_tail = verify_fp.read(signature_tail_length) |
| |
| self.assertEqual(b'\x1d\x00\x01\x00\x00', |
| metadata_signature_proto_tail[-5:]) |
| metadata_signature = metadata_signature_proto_tail[:-5] |
| |
| # Now we extract the metadata hash via brillo_update_payload script, which |
| # will serve as the oracle result. |
| payload_sig_file = common.MakeTempFile(prefix="sig-", suffix=".bin") |
| metadata_sig_file = common.MakeTempFile(prefix="sig-", suffix=".bin") |
| cmd = ['brillo_update_payload', 'hash', |
| '--unsigned_payload', payload.payload_file, |
| '--signature_size', str(self.SIGNATURE_SIZE), |
| '--metadata_hash_file', metadata_sig_file, |
| '--payload_hash_file', payload_sig_file] |
| proc = common.Run(cmd) |
| stdoutdata, _ = proc.communicate() |
| self.assertEqual( |
| 0, proc.returncode, |
| 'Failed to run brillo_update_payload:\n{}'.format(stdoutdata)) |
| |
| signed_metadata_sig_file = payload_signer.Sign(metadata_sig_file) |
| |
| # Finally we can compare the two signatures. |
| with open(signed_metadata_sig_file, 'rb') as verify_fp: |
| self.assertEqual(verify_fp.read(), metadata_signature) |
| |
| @staticmethod |
| def construct_zip_package_withValidPayload(with_metadata=False): |
| # Cannot use construct_zip_package() since we need a "valid" payload.bin. |
| target_file = construct_target_files() |
| payload = Payload() |
| payload.Generate(target_file) |
| |
| payload_signer = PayloadSigner() |
| payload.Sign(payload_signer) |
| |
| zip_file = common.MakeTempFile(suffix='.zip') |
| with zipfile.ZipFile(zip_file, 'w') as zip_fp: |
| # 'payload.bin', |
| payload.WriteToZip(zip_fp) |
| |
| # Other entries. |
| entries = ['care_map.txt', 'compatibility.zip'] |
| |
| # Put META-INF/com/android/metadata if needed. |
| if with_metadata: |
| entries.append('META-INF/com/android/metadata') |
| |
| for entry in entries: |
| zip_fp.writestr( |
| entry, entry.replace('.', '-').upper(), zipfile.ZIP_STORED) |
| |
| return zip_file |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Compute(self): |
| zip_file = self.construct_zip_package_withValidPayload() |
| property_files = AbOtaPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| property_files_string = property_files.Compute(zip_fp) |
| |
| tokens = self._parse_property_files_string(property_files_string) |
| # "6" indcludes the four entries above, one metadata entry, and one entry |
| # for payload-metadata.bin. |
| self.assertEqual(6, len(tokens)) |
| self._verify_entries( |
| zip_file, tokens, ('care_map.txt', 'compatibility.zip')) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Finalize(self): |
| zip_file = self.construct_zip_package_withValidPayload(with_metadata=True) |
| property_files = AbOtaPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| raw_metadata = property_files.GetPropertyFilesString( |
| zip_fp, reserve_space=False) |
| property_files_string = property_files.Finalize(zip_fp, len(raw_metadata)) |
| |
| tokens = self._parse_property_files_string(property_files_string) |
| # "6" indcludes the four entries above, one metadata entry, and one entry |
| # for payload-metadata.bin. |
| self.assertEqual(6, len(tokens)) |
| self._verify_entries( |
| zip_file, tokens, ('care_map.txt', 'compatibility.zip')) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Verify(self): |
| zip_file = self.construct_zip_package_withValidPayload(with_metadata=True) |
| property_files = AbOtaPropertyFiles() |
| with zipfile.ZipFile(zip_file, 'r') as zip_fp: |
| raw_metadata = property_files.GetPropertyFilesString( |
| zip_fp, reserve_space=False) |
| |
| property_files.Verify(zip_fp, raw_metadata) |
| |
| |
| class NonAbOtaPropertyFilesTest(PropertyFilesTest): |
| """Additional sanity checks specialized for NonAbOtaPropertyFiles.""" |
| |
| def test_init(self): |
| property_files = NonAbOtaPropertyFiles() |
| self.assertEqual('ota-property-files', property_files.name) |
| self.assertEqual((), property_files.required) |
| self.assertEqual((), property_files.optional) |
| |
| def test_Compute(self): |
| entries = () |
| zip_file = self.construct_zip_package(entries) |
| property_files = NonAbOtaPropertyFiles() |
| with zipfile.ZipFile(zip_file) as zip_fp: |
| property_files_string = property_files.Compute(zip_fp) |
| |
| tokens = self._parse_property_files_string(property_files_string) |
| self.assertEqual(1, len(tokens)) |
| self._verify_entries(zip_file, tokens, entries) |
| |
| def test_Finalize(self): |
| entries = [ |
| 'META-INF/com/android/metadata', |
| ] |
| zip_file = self.construct_zip_package(entries) |
| property_files = NonAbOtaPropertyFiles() |
| with zipfile.ZipFile(zip_file) as zip_fp: |
| raw_metadata = property_files.GetPropertyFilesString( |
| zip_fp, reserve_space=False) |
| property_files_string = property_files.Finalize(zip_fp, len(raw_metadata)) |
| tokens = self._parse_property_files_string(property_files_string) |
| |
| self.assertEqual(1, len(tokens)) |
| # 'META-INF/com/android/metadata' will be key'd as 'metadata'. |
| entries[0] = 'metadata' |
| self._verify_entries(zip_file, tokens, entries) |
| |
| def test_Verify(self): |
| entries = ( |
| 'META-INF/com/android/metadata', |
| ) |
| zip_file = self.construct_zip_package(entries) |
| property_files = NonAbOtaPropertyFiles() |
| with zipfile.ZipFile(zip_file) as zip_fp: |
| raw_metadata = property_files.GetPropertyFilesString( |
| zip_fp, reserve_space=False) |
| |
| property_files.Verify(zip_fp, raw_metadata) |
| |
| |
| class PayloadSignerTest(test_utils.ReleaseToolsTestCase): |
| |
| SIGFILE = 'sigfile.bin' |
| SIGNED_SIGFILE = 'signed-sigfile.bin' |
| |
| def setUp(self): |
| self.testdata_dir = test_utils.get_testdata_dir() |
| self.assertTrue(os.path.exists(self.testdata_dir)) |
| |
| common.OPTIONS.payload_signer = None |
| common.OPTIONS.payload_signer_args = [] |
| common.OPTIONS.package_key = os.path.join(self.testdata_dir, 'testkey') |
| common.OPTIONS.key_passwords = { |
| common.OPTIONS.package_key : None, |
| } |
| |
| def _assertFilesEqual(self, file1, file2): |
| with open(file1, 'rb') as fp1, open(file2, 'rb') as fp2: |
| self.assertEqual(fp1.read(), fp2.read()) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_init(self): |
| payload_signer = PayloadSigner() |
| self.assertEqual('openssl', payload_signer.signer) |
| self.assertEqual(256, payload_signer.maximum_signature_size) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_init_withPassword(self): |
| common.OPTIONS.package_key = os.path.join( |
| self.testdata_dir, 'testkey_with_passwd') |
| common.OPTIONS.key_passwords = { |
| common.OPTIONS.package_key : 'foo', |
| } |
| payload_signer = PayloadSigner() |
| self.assertEqual('openssl', payload_signer.signer) |
| |
| def test_init_withExternalSigner(self): |
| common.OPTIONS.payload_signer = 'abc' |
| common.OPTIONS.payload_signer_args = ['arg1', 'arg2'] |
| common.OPTIONS.payload_signer_maximum_signature_size = '512' |
| payload_signer = PayloadSigner() |
| self.assertEqual('abc', payload_signer.signer) |
| self.assertEqual(['arg1', 'arg2'], payload_signer.signer_args) |
| self.assertEqual(512, payload_signer.maximum_signature_size) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_GetMaximumSignatureSizeInBytes_512Bytes(self): |
| signing_key = os.path.join(self.testdata_dir, 'testkey_RSA4096.key') |
| # pylint: disable=protected-access |
| signature_size = PayloadSigner._GetMaximumSignatureSizeInBytes(signing_key) |
| self.assertEqual(512, signature_size) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_GetMaximumSignatureSizeInBytes_ECKey(self): |
| signing_key = os.path.join(self.testdata_dir, 'testkey_EC.key') |
| # pylint: disable=protected-access |
| signature_size = PayloadSigner._GetMaximumSignatureSizeInBytes(signing_key) |
| self.assertEqual(72, signature_size) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Sign(self): |
| payload_signer = PayloadSigner() |
| input_file = os.path.join(self.testdata_dir, self.SIGFILE) |
| signed_file = payload_signer.Sign(input_file) |
| |
| verify_file = os.path.join(self.testdata_dir, self.SIGNED_SIGFILE) |
| self._assertFilesEqual(verify_file, signed_file) |
| |
| def test_Sign_withExternalSigner_openssl(self): |
| """Uses openssl as the external payload signer.""" |
| common.OPTIONS.payload_signer = 'openssl' |
| common.OPTIONS.payload_signer_args = [ |
| 'pkeyutl', '-sign', '-keyform', 'DER', '-inkey', |
| os.path.join(self.testdata_dir, 'testkey.pk8'), |
| '-pkeyopt', 'digest:sha256'] |
| payload_signer = PayloadSigner() |
| input_file = os.path.join(self.testdata_dir, self.SIGFILE) |
| signed_file = payload_signer.Sign(input_file) |
| |
| verify_file = os.path.join(self.testdata_dir, self.SIGNED_SIGFILE) |
| self._assertFilesEqual(verify_file, signed_file) |
| |
| def test_Sign_withExternalSigner_script(self): |
| """Uses testdata/payload_signer.sh as the external payload signer.""" |
| common.OPTIONS.payload_signer = os.path.join( |
| self.testdata_dir, 'payload_signer.sh') |
| os.chmod(common.OPTIONS.payload_signer, 0o700) |
| common.OPTIONS.payload_signer_args = [ |
| os.path.join(self.testdata_dir, 'testkey.pk8')] |
| payload_signer = PayloadSigner() |
| input_file = os.path.join(self.testdata_dir, self.SIGFILE) |
| signed_file = payload_signer.Sign(input_file) |
| |
| verify_file = os.path.join(self.testdata_dir, self.SIGNED_SIGFILE) |
| self._assertFilesEqual(verify_file, signed_file) |
| |
| |
| class PayloadTest(test_utils.ReleaseToolsTestCase): |
| |
| def setUp(self): |
| self.testdata_dir = test_utils.get_testdata_dir() |
| self.assertTrue(os.path.exists(self.testdata_dir)) |
| |
| common.OPTIONS.wipe_user_data = False |
| common.OPTIONS.payload_signer = None |
| common.OPTIONS.payload_signer_args = None |
| common.OPTIONS.package_key = os.path.join(self.testdata_dir, 'testkey') |
| common.OPTIONS.key_passwords = { |
| common.OPTIONS.package_key : None, |
| } |
| |
| @staticmethod |
| def _create_payload_full(secondary=False): |
| target_file = construct_target_files(secondary) |
| payload = Payload(secondary) |
| payload.Generate(target_file) |
| return payload |
| |
| @staticmethod |
| def _create_payload_incremental(): |
| target_file = construct_target_files() |
| source_file = construct_target_files() |
| payload = Payload() |
| payload.Generate(target_file, source_file) |
| return payload |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Generate_full(self): |
| payload = self._create_payload_full() |
| self.assertTrue(os.path.exists(payload.payload_file)) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Generate_incremental(self): |
| payload = self._create_payload_incremental() |
| self.assertTrue(os.path.exists(payload.payload_file)) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Generate_additionalArgs(self): |
| target_file = construct_target_files() |
| source_file = construct_target_files() |
| payload = Payload() |
| # This should work the same as calling payload.Generate(target_file, |
| # source_file). |
| payload.Generate( |
| target_file, additional_args=["--source_image", source_file]) |
| self.assertTrue(os.path.exists(payload.payload_file)) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Generate_invalidInput(self): |
| target_file = construct_target_files() |
| common.ZipDelete(target_file, 'IMAGES/vendor.img') |
| payload = Payload() |
| self.assertRaises(common.ExternalError, payload.Generate, target_file) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Sign_full(self): |
| payload = self._create_payload_full() |
| payload.Sign(PayloadSigner()) |
| |
| output_file = common.MakeTempFile(suffix='.zip') |
| with zipfile.ZipFile(output_file, 'w') as output_zip: |
| payload.WriteToZip(output_zip) |
| |
| import check_ota_package_signature |
| check_ota_package_signature.VerifyAbOtaPayload( |
| os.path.join(self.testdata_dir, 'testkey.x509.pem'), |
| output_file) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Sign_incremental(self): |
| payload = self._create_payload_incremental() |
| payload.Sign(PayloadSigner()) |
| |
| output_file = common.MakeTempFile(suffix='.zip') |
| with zipfile.ZipFile(output_file, 'w') as output_zip: |
| payload.WriteToZip(output_zip) |
| |
| import check_ota_package_signature |
| check_ota_package_signature.VerifyAbOtaPayload( |
| os.path.join(self.testdata_dir, 'testkey.x509.pem'), |
| output_file) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Sign_withDataWipe(self): |
| common.OPTIONS.wipe_user_data = True |
| payload = self._create_payload_full() |
| payload.Sign(PayloadSigner()) |
| |
| with open(payload.payload_properties) as properties_fp: |
| self.assertIn("POWERWASH=1", properties_fp.read()) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Sign_secondary(self): |
| payload = self._create_payload_full(secondary=True) |
| payload.Sign(PayloadSigner()) |
| |
| with open(payload.payload_properties) as properties_fp: |
| self.assertIn("SWITCH_SLOT_ON_REBOOT=0", properties_fp.read()) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_Sign_badSigner(self): |
| """Tests that signing failure can be captured.""" |
| payload = self._create_payload_full() |
| payload_signer = PayloadSigner() |
| payload_signer.signer_args.append('bad-option') |
| self.assertRaises(common.ExternalError, payload.Sign, payload_signer) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_WriteToZip(self): |
| payload = self._create_payload_full() |
| payload.Sign(PayloadSigner()) |
| |
| output_file = common.MakeTempFile(suffix='.zip') |
| with zipfile.ZipFile(output_file, 'w') as output_zip: |
| payload.WriteToZip(output_zip) |
| |
| with zipfile.ZipFile(output_file) as verify_zip: |
| # First make sure we have the essential entries. |
| namelist = verify_zip.namelist() |
| self.assertIn(Payload.PAYLOAD_BIN, namelist) |
| self.assertIn(Payload.PAYLOAD_PROPERTIES_TXT, namelist) |
| |
| # Then assert these entries are stored. |
| for entry_info in verify_zip.infolist(): |
| if entry_info.filename not in (Payload.PAYLOAD_BIN, |
| Payload.PAYLOAD_PROPERTIES_TXT): |
| continue |
| self.assertEqual(zipfile.ZIP_STORED, entry_info.compress_type) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_WriteToZip_unsignedPayload(self): |
| """Unsigned payloads should not be allowed to be written to zip.""" |
| payload = self._create_payload_full() |
| |
| output_file = common.MakeTempFile(suffix='.zip') |
| with zipfile.ZipFile(output_file, 'w') as output_zip: |
| self.assertRaises(AssertionError, payload.WriteToZip, output_zip) |
| |
| # Also test with incremental payload. |
| payload = self._create_payload_incremental() |
| |
| output_file = common.MakeTempFile(suffix='.zip') |
| with zipfile.ZipFile(output_file, 'w') as output_zip: |
| self.assertRaises(AssertionError, payload.WriteToZip, output_zip) |
| |
| @test_utils.SkipIfExternalToolsUnavailable() |
| def test_WriteToZip_secondary(self): |
| payload = self._create_payload_full(secondary=True) |
| payload.Sign(PayloadSigner()) |
| |
| output_file = common.MakeTempFile(suffix='.zip') |
| with zipfile.ZipFile(output_file, 'w') as output_zip: |
| payload.WriteToZip(output_zip) |
| |
| with zipfile.ZipFile(output_file) as verify_zip: |
| # First make sure we have the essential entries. |
| namelist = verify_zip.namelist() |
| self.assertIn(Payload.SECONDARY_PAYLOAD_BIN, namelist) |
| self.assertIn(Payload.SECONDARY_PAYLOAD_PROPERTIES_TXT, namelist) |
| |
| # Then assert these entries are stored. |
| for entry_info in verify_zip.infolist(): |
| if entry_info.filename not in ( |
| Payload.SECONDARY_PAYLOAD_BIN, |
| Payload.SECONDARY_PAYLOAD_PROPERTIES_TXT): |
| continue |
| self.assertEqual(zipfile.ZIP_STORED, entry_info.compress_type) |
| |
| |
| class RuntimeFingerprintTest(test_utils.ReleaseToolsTestCase): |
| MISC_INFO = [ |
| 'recovery_api_version=3', |
| 'fstab_version=2', |
| 'recovery_as_boot=true', |
| ] |
| |
| BUILD_PROP = [ |
| 'ro.build.version.release=version-release', |
| 'ro.build.id=build-id', |
| 'ro.build.version.incremental=version-incremental', |
| 'ro.build.type=build-type', |
| 'ro.build.tags=build-tags', |
| 'ro.build.version.sdk=30', |
| 'ro.build.version.security_patch=2020', |
| 'ro.build.date.utc=12345678' |
| ] |
| |
| VENDOR_BUILD_PROP = [ |
| 'ro.product.vendor.brand=vendor-product-brand', |
| 'ro.product.vendor.name=vendor-product-name', |
| 'ro.product.vendor.device=vendor-product-device' |
| ] |
| |
| def setUp(self): |
| common.OPTIONS.oem_dicts = None |
| self.test_dir = common.MakeTempDir() |
| self.writeFiles({'META/misc_info.txt': '\n'.join(self.MISC_INFO)}, |
| self.test_dir) |
| |
| def writeFiles(self, contents_dict, out_dir): |
| for path, content in contents_dict.items(): |
| abs_path = os.path.join(out_dir, path) |
| dir_name = os.path.dirname(abs_path) |
| if not os.path.exists(dir_name): |
| os.makedirs(dir_name) |
| with open(abs_path, 'w') as f: |
| f.write(content) |
| |
| @staticmethod |
| def constructFingerprint(prefix): |
| return '{}:version-release/build-id/version-incremental:' \ |
| 'build-type/build-tags'.format(prefix) |
| |
| def test_CalculatePossibleFingerprints_no_dynamic_fingerprint(self): |
| build_prop = copy.deepcopy(self.BUILD_PROP) |
| build_prop.extend([ |
| 'ro.product.brand=product-brand', |
| 'ro.product.name=product-name', |
| 'ro.product.device=product-device', |
| ]) |
| self.writeFiles({ |
| 'SYSTEM/build.prop': '\n'.join(build_prop), |
| 'VENDOR/build.prop': '\n'.join(self.VENDOR_BUILD_PROP), |
| }, self.test_dir) |
| |
| build_info = common.BuildInfo(common.LoadInfoDict(self.test_dir)) |
| expected = ({'product-device'}, |
| {self.constructFingerprint( |
| 'product-brand/product-name/product-device')}) |
| self.assertEqual(expected, |
| CalculateRuntimeDevicesAndFingerprints(build_info, {})) |
| |
| def test_CalculatePossibleFingerprints_single_override(self): |
| vendor_build_prop = copy.deepcopy(self.VENDOR_BUILD_PROP) |
| vendor_build_prop.extend([ |
| 'import /vendor/etc/build_${ro.boot.sku_name}.prop', |
| ]) |
| self.writeFiles({ |
| 'SYSTEM/build.prop': '\n'.join(self.BUILD_PROP), |
| 'VENDOR/build.prop': '\n'.join(vendor_build_prop), |
| 'VENDOR/etc/build_std.prop': |
| 'ro.product.vendor.name=vendor-product-std', |
| 'VENDOR/etc/build_pro.prop': |
| 'ro.product.vendor.name=vendor-product-pro', |
| }, self.test_dir) |
| |
| build_info = common.BuildInfo(common.LoadInfoDict(self.test_dir)) |
| boot_variable_values = {'ro.boot.sku_name': ['std', 'pro']} |
| |
| expected = ({'vendor-product-device'}, { |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-name/vendor-product-device'), |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-std/vendor-product-device'), |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-pro/vendor-product-device'), |
| }) |
| self.assertEqual( |
| expected, CalculateRuntimeDevicesAndFingerprints( |
| build_info, boot_variable_values)) |
| |
| def test_CalculatePossibleFingerprints_multiple_overrides(self): |
| vendor_build_prop = copy.deepcopy(self.VENDOR_BUILD_PROP) |
| vendor_build_prop.extend([ |
| 'import /vendor/etc/build_${ro.boot.sku_name}.prop', |
| 'import /vendor/etc/build_${ro.boot.device_name}.prop', |
| ]) |
| self.writeFiles({ |
| 'SYSTEM/build.prop': '\n'.join(self.BUILD_PROP), |
| 'VENDOR/build.prop': '\n'.join(vendor_build_prop), |
| 'VENDOR/etc/build_std.prop': |
| 'ro.product.vendor.name=vendor-product-std', |
| 'VENDOR/etc/build_product1.prop': |
| 'ro.product.vendor.device=vendor-device-product1', |
| 'VENDOR/etc/build_pro.prop': |
| 'ro.product.vendor.name=vendor-product-pro', |
| 'VENDOR/etc/build_product2.prop': |
| 'ro.product.vendor.device=vendor-device-product2', |
| }, self.test_dir) |
| |
| build_info = common.BuildInfo(common.LoadInfoDict(self.test_dir)) |
| boot_variable_values = { |
| 'ro.boot.sku_name': ['std', 'pro'], |
| 'ro.boot.device_name': ['product1', 'product2'], |
| } |
| |
| expected_devices = {'vendor-product-device', 'vendor-device-product1', |
| 'vendor-device-product2'} |
| expected_fingerprints = { |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-name/vendor-product-device'), |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-std/vendor-device-product1'), |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-pro/vendor-device-product1'), |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-std/vendor-device-product2'), |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-pro/vendor-device-product2') |
| } |
| self.assertEqual((expected_devices, expected_fingerprints), |
| CalculateRuntimeDevicesAndFingerprints( |
| build_info, boot_variable_values)) |
| |
| def test_GetPackageMetadata_full_package(self): |
| vendor_build_prop = copy.deepcopy(self.VENDOR_BUILD_PROP) |
| vendor_build_prop.extend([ |
| 'import /vendor/etc/build_${ro.boot.sku_name}.prop', |
| ]) |
| self.writeFiles({ |
| 'SYSTEM/build.prop': '\n'.join(self.BUILD_PROP), |
| 'VENDOR/build.prop': '\n'.join(vendor_build_prop), |
| 'VENDOR/etc/build_std.prop': |
| 'ro.product.vendor.name=vendor-product-std', |
| 'VENDOR/etc/build_pro.prop': |
| 'ro.product.vendor.name=vendor-product-pro', |
| }, self.test_dir) |
| |
| common.OPTIONS.boot_variable_file = common.MakeTempFile() |
| with open(common.OPTIONS.boot_variable_file, 'w') as f: |
| f.write('ro.boot.sku_name=std,pro') |
| |
| build_info = common.BuildInfo(common.LoadInfoDict(self.test_dir)) |
| metadata = GetPackageMetadata(build_info) |
| self.assertEqual('vendor-product-device', metadata['pre-device']) |
| fingerprints = [ |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-name/vendor-product-device'), |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-pro/vendor-product-device'), |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-std/vendor-product-device'), |
| ] |
| self.assertEqual('|'.join(fingerprints), metadata['post-build']) |
| |
| def test_GetPackageMetadata_incremental_package(self): |
| vendor_build_prop = copy.deepcopy(self.VENDOR_BUILD_PROP) |
| vendor_build_prop.extend([ |
| 'import /vendor/etc/build_${ro.boot.sku_name}.prop', |
| ]) |
| self.writeFiles({ |
| 'SYSTEM/build.prop': '\n'.join(self.BUILD_PROP), |
| 'VENDOR/build.prop': '\n'.join(vendor_build_prop), |
| 'VENDOR/etc/build_std.prop': |
| 'ro.product.vendor.device=vendor-device-std', |
| 'VENDOR/etc/build_pro.prop': |
| 'ro.product.vendor.device=vendor-device-pro', |
| }, self.test_dir) |
| |
| common.OPTIONS.boot_variable_file = common.MakeTempFile() |
| with open(common.OPTIONS.boot_variable_file, 'w') as f: |
| f.write('ro.boot.sku_name=std,pro') |
| |
| source_dir = common.MakeTempDir() |
| source_build_prop = [ |
| 'ro.build.version.release=source-version-release', |
| 'ro.build.id=source-build-id', |
| 'ro.build.version.incremental=source-version-incremental', |
| 'ro.build.type=build-type', |
| 'ro.build.tags=build-tags', |
| 'ro.build.version.sdk=29', |
| 'ro.build.version.security_patch=2020', |
| 'ro.build.date.utc=12340000' |
| ] |
| self.writeFiles({ |
| 'META/misc_info.txt': '\n'.join(self.MISC_INFO), |
| 'SYSTEM/build.prop': '\n'.join(source_build_prop), |
| 'VENDOR/build.prop': '\n'.join(vendor_build_prop), |
| 'VENDOR/etc/build_std.prop': |
| 'ro.product.vendor.device=vendor-device-std', |
| 'VENDOR/etc/build_pro.prop': |
| 'ro.product.vendor.device=vendor-device-pro', |
| }, source_dir) |
| common.OPTIONS.incremental_source = source_dir |
| |
| target_info = common.BuildInfo(common.LoadInfoDict(self.test_dir)) |
| source_info = common.BuildInfo(common.LoadInfoDict(source_dir)) |
| |
| metadata = GetPackageMetadata(target_info, source_info) |
| self.assertEqual( |
| 'vendor-device-pro|vendor-device-std|vendor-product-device', |
| metadata['pre-device']) |
| suffix = ':source-version-release/source-build-id/' \ |
| 'source-version-incremental:build-type/build-tags' |
| pre_fingerprints = [ |
| 'vendor-product-brand/vendor-product-name/vendor-device-pro' |
| '{}'.format(suffix), |
| 'vendor-product-brand/vendor-product-name/vendor-device-std' |
| '{}'.format(suffix), |
| 'vendor-product-brand/vendor-product-name/vendor-product-device' |
| '{}'.format(suffix), |
| ] |
| self.assertEqual('|'.join(pre_fingerprints), metadata['pre-build']) |
| |
| post_fingerprints = [ |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-name/vendor-device-pro'), |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-name/vendor-device-std'), |
| self.constructFingerprint( |
| 'vendor-product-brand/vendor-product-name/vendor-product-device'), |
| ] |
| self.assertEqual('|'.join(post_fingerprints), metadata['post-build']) |
