| # | |
| # Copyright (C) 2008 The Android Open Source Project | |
| # | |
| # Licensed under the Apache License, Version 2.0 (the "License"); | |
| # you may not use this file except in compliance with the License. | |
| # You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, software | |
| # distributed under the License is distributed on an "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| # See the License for the specific language governing permissions and | |
| # limitations under the License. | |
| # | |
| ## | |
| ## Common build system definitions. Mostly standard | |
| ## commands for building various types of targets, which | |
| ## are used by others to construct the final targets. | |
| ## | |
| # These are variables we use to collect overall lists | |
| # of things being processed. | |
| # Full paths to all of the documentation | |
| ALL_DOCS:= | |
| # The short names of all of the targets in the system. | |
| # For each element of ALL_MODULES, two other variables | |
| # are defined: | |
| # $(ALL_MODULES.$(target)).BUILT | |
| # $(ALL_MODULES.$(target)).INSTALLED | |
| # The BUILT variable contains LOCAL_BUILT_MODULE for that | |
| # target, and the INSTALLED variable contains the LOCAL_INSTALLED_MODULE. | |
| # Some targets may have multiple files listed in the BUILT and INSTALLED | |
| # sub-variables. | |
| ALL_MODULES:= | |
| # Full paths to targets that should be added to the "make droid" | |
| # set of installed targets. | |
| ALL_DEFAULT_INSTALLED_MODULES:= | |
| # The list of tags that have been defined by | |
| # LOCAL_MODULE_TAGS. Each word in this variable maps | |
| # to a corresponding ALL_MODULE_TAGS.<tagname> variable | |
| # that contains all of the INSTALLED_MODULEs with that tag. | |
| ALL_MODULE_TAGS:= | |
| # Similar to ALL_MODULE_TAGS, but contains the short names | |
| # of all targets for a particular tag. The top-level variable | |
| # won't have the list of tags; ust ALL_MODULE_TAGS to get | |
| # the list of all known tags. (This means that this variable | |
| # will always be empty; it's just here as a placeholder for | |
| # its sub-variables.) | |
| ALL_MODULE_NAME_TAGS:= | |
| # Full paths to all prebuilt files that will be copied | |
| # (used to make the dependency on acp) | |
| ALL_PREBUILT:= | |
| # Full path to all files that are made by some tool | |
| ALL_GENERATED_SOURCES:= | |
| # Full path to all asm, C, C++, lex and yacc generated C files. | |
| # These all have an order-only dependency on the copied headers | |
| ALL_C_CPP_ETC_OBJECTS:= | |
| # The list of dynamic binaries that haven't been stripped/compressed/etc. | |
| ALL_ORIGINAL_DYNAMIC_BINARIES:= | |
| # These files go into the SDK | |
| ALL_SDK_FILES:= | |
| # Files for dalvik. This is often build without building the rest of the OS. | |
| INTERNAL_DALVIK_MODULES:= | |
| # All findbugs xml files | |
| ALL_FINDBUGS_FILES:= | |
| # GPL module license files | |
| ALL_GPL_MODULE_LICENSE_FILES:= | |
| # Target and host installed module's dependencies on shared libraries. | |
| # They are list of "<module_name>:<installed_file>:lib1,lib2...". | |
| TARGET_DEPENDENCIES_ON_SHARED_LIBRARIES := | |
| $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_DEPENDENCIES_ON_SHARED_LIBRARIES := | |
| HOST_DEPENDENCIES_ON_SHARED_LIBRARIES := | |
| $(HOST_2ND_ARCH_VAR_PREFIX)HOST_DEPENDENCIES_ON_SHARED_LIBRARIES := | |
| HOST_CROSS_DEPENDENCIES_ON_SHARED_LIBRARIES := | |
| # Generated class file names for Android resource. | |
| # They are escaped and quoted so can be passed safely to a bash command. | |
| ANDROID_RESOURCE_GENERATED_CLASSES := 'R.class' 'R$$*.class' 'Manifest.class' 'Manifest$$*.class' | |
| # Display names for various build targets | |
| TARGET_DISPLAY := target | |
| HOST_DISPLAY := host | |
| HOST_CROSS_DISPLAY := host cross | |
| ########################################################### | |
| ## Debugging; prints a variable list to stdout | |
| ########################################################### | |
| # $(1): variable name list, not variable values | |
| define print-vars | |
| $(foreach var,$(1), \ | |
| $(info $(var):) \ | |
| $(foreach word,$($(var)), \ | |
| $(info $(space)$(space)$(word)) \ | |
| ) \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Evaluates to true if the string contains the word true, | |
| ## and empty otherwise | |
| ## $(1): a var to test | |
| ########################################################### | |
| define true-or-empty | |
| $(filter true, $(1)) | |
| endef | |
| ########################################################### | |
| ## Retrieve the directory of the current makefile | |
| ## Must be called before including any other makefile!! | |
| ########################################################### | |
| # Figure out where we are. | |
| define my-dir | |
| $(strip \ | |
| $(eval LOCAL_MODULE_MAKEFILE := $$(lastword $$(MAKEFILE_LIST))) \ | |
| $(if $(filter $(BUILD_SYSTEM)/% $(OUT_DIR)/%,$(LOCAL_MODULE_MAKEFILE)), \ | |
| $(error my-dir must be called before including any other makefile.) \ | |
| , \ | |
| $(patsubst %/,%,$(dir $(LOCAL_MODULE_MAKEFILE))) \ | |
| ) \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Retrieve a list of all makefiles immediately below some directory | |
| ########################################################### | |
| define all-makefiles-under | |
| $(sort $(wildcard $(1)/*/Android.mk)) | |
| endef | |
| ########################################################### | |
| ## Look under a directory for makefiles that don't have parent | |
| ## makefiles. | |
| ########################################################### | |
| # $(1): directory to search under | |
| # Ignores $(1)/Android.mk | |
| define first-makefiles-under | |
| $(shell build/tools/findleaves.py --prune=$(OUT_DIR) --prune=.repo --prune=.git \ | |
| --mindepth=2 $(1) Android.mk) | |
| endef | |
| ########################################################### | |
| ## Retrieve a list of all makefiles immediately below your directory | |
| ## Must be called before including any other makefile!! | |
| ########################################################### | |
| define all-subdir-makefiles | |
| $(call all-makefiles-under,$(call my-dir)) | |
| endef | |
| ########################################################### | |
| ## Look in the named list of directories for makefiles, | |
| ## relative to the current directory. | |
| ## Must be called before including any other makefile!! | |
| ########################################################### | |
| # $(1): List of directories to look for under this directory | |
| define all-named-subdir-makefiles | |
| $(sort $(wildcard $(addsuffix /Android.mk, $(addprefix $(call my-dir)/,$(1))))) | |
| endef | |
| ########################################################### | |
| ## Find all of the java files under the named directories. | |
| ## Meant to be used like: | |
| ## SRC_FILES := $(call all-java-files-under,src tests) | |
| ########################################################### | |
| define all-java-files-under | |
| $(patsubst ./%,%, \ | |
| $(shell cd $(LOCAL_PATH) ; \ | |
| find -L $(1) -name "*.java" -and -not -name ".*") \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Find all of the java files from here. Meant to be used like: | |
| ## SRC_FILES := $(call all-subdir-java-files) | |
| ########################################################### | |
| define all-subdir-java-files | |
| $(call all-java-files-under,.) | |
| endef | |
| ########################################################### | |
| ## Find all of the c files under the named directories. | |
| ## Meant to be used like: | |
| ## SRC_FILES := $(call all-c-files-under,src tests) | |
| ########################################################### | |
| define all-c-files-under | |
| $(patsubst ./%,%, \ | |
| $(shell cd $(LOCAL_PATH) ; \ | |
| find -L $(1) -name "*.c" -and -not -name ".*") \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Find all of the c files from here. Meant to be used like: | |
| ## SRC_FILES := $(call all-subdir-c-files) | |
| ########################################################### | |
| define all-subdir-c-files | |
| $(call all-c-files-under,.) | |
| endef | |
| ########################################################### | |
| ## Find all files named "I*.aidl" under the named directories, | |
| ## which must be relative to $(LOCAL_PATH). The returned list | |
| ## is relative to $(LOCAL_PATH). | |
| ########################################################### | |
| define all-Iaidl-files-under | |
| $(patsubst ./%,%, \ | |
| $(shell cd $(LOCAL_PATH) ; \ | |
| find -L $(1) -name "I*.aidl" -and -not -name ".*") \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Find all of the "I*.aidl" files under $(LOCAL_PATH). | |
| ########################################################### | |
| define all-subdir-Iaidl-files | |
| $(call all-Iaidl-files-under,.) | |
| endef | |
| ########################################################### | |
| ## Find all of the logtags files under the named directories. | |
| ## Meant to be used like: | |
| ## SRC_FILES := $(call all-logtags-files-under,src) | |
| ########################################################### | |
| define all-logtags-files-under | |
| $(patsubst ./%,%, \ | |
| $(shell cd $(LOCAL_PATH) ; \ | |
| find -L $(1) -name "*.logtags" -and -not -name ".*") \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Find all of the .proto files under the named directories. | |
| ## Meant to be used like: | |
| ## SRC_FILES := $(call all-proto-files-under,src) | |
| ########################################################### | |
| define all-proto-files-under | |
| $(patsubst ./%,%, \ | |
| $(shell cd $(LOCAL_PATH) ; \ | |
| find -L $(1) -name "*.proto" -and -not -name ".*") \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Find all of the RenderScript files under the named directories. | |
| ## Meant to be used like: | |
| ## SRC_FILES := $(call all-renderscript-files-under,src) | |
| ########################################################### | |
| define all-renderscript-files-under | |
| $(patsubst ./%,%, \ | |
| $(shell cd $(LOCAL_PATH) ; \ | |
| find -L $(1) \( -name "*.rs" -or -name "*.fs" \) -and -not -name ".*") \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Find all of the S files under the named directories. | |
| ## Meant to be used like: | |
| ## SRC_FILES := $(call all-c-files-under,src tests) | |
| ########################################################### | |
| define all-S-files-under | |
| $(patsubst ./%,%, \ | |
| $(shell cd $(LOCAL_PATH) ; \ | |
| find -L $(1) -name "*.S" -and -not -name ".*") \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Find all of the html files under the named directories. | |
| ## Meant to be used like: | |
| ## SRC_FILES := $(call all-html-files-under,src tests) | |
| ########################################################### | |
| define all-html-files-under | |
| $(patsubst ./%,%, \ | |
| $(shell cd $(LOCAL_PATH) ; \ | |
| find -L $(1) -name "*.html" -and -not -name ".*") \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Find all of the html files from here. Meant to be used like: | |
| ## SRC_FILES := $(call all-subdir-html-files) | |
| ########################################################### | |
| define all-subdir-html-files | |
| $(call all-html-files-under,.) | |
| endef | |
| ########################################################### | |
| ## Find all of the files matching pattern | |
| ## SRC_FILES := $(call find-subdir-files, <pattern>) | |
| ########################################################### | |
| define find-subdir-files | |
| $(patsubst ./%,%,$(shell cd $(LOCAL_PATH) ; find -L $(1))) | |
| endef | |
| ########################################################### | |
| # find the files in the subdirectory $1 of LOCAL_DIR | |
| # matching pattern $2, filtering out files $3 | |
| # e.g. | |
| # SRC_FILES += $(call find-subdir-subdir-files, \ | |
| # css, *.cpp, DontWantThis.cpp) | |
| ########################################################### | |
| define find-subdir-subdir-files | |
| $(filter-out $(patsubst %,$(1)/%,$(3)),$(patsubst ./%,%,$(shell cd \ | |
| $(LOCAL_PATH) ; find -L $(1) -maxdepth 1 -name $(2)))) | |
| endef | |
| ########################################################### | |
| ## Find all of the files matching pattern | |
| ## SRC_FILES := $(call all-subdir-java-files) | |
| ########################################################### | |
| define find-subdir-assets | |
| $(if $(1),$(patsubst ./%,%, \ | |
| $(shell if [ -d $(1) ] ; then cd $(1) ; find ./ -not -name '.*' -and -type f -and -not -type l ; fi)), \ | |
| $(warning Empty argument supplied to find-subdir-assets) \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Find various file types in a list of directories relative to $(LOCAL_PATH) | |
| ########################################################### | |
| define find-other-java-files | |
| $(call find-subdir-files,$(1) -name "*.java" -and -not -name ".*") | |
| endef | |
| define find-other-html-files | |
| $(call find-subdir-files,$(1) -name "*.html" -and -not -name ".*") | |
| endef | |
| ########################################################### | |
| # Use utility find to find given files in the given subdirs. | |
| # This function uses $(1), instead of LOCAL_PATH as the base. | |
| # $(1): the base dir, relative to the root of the source tree. | |
| # $(2): the file name pattern to be passed to find as "-name". | |
| # $(3): a list of subdirs of the base dir. | |
| # Returns: a list of paths relative to the base dir. | |
| ########################################################### | |
| define find-files-in-subdirs | |
| $(patsubst ./%,%, \ | |
| $(shell cd $(1) ; \ | |
| find -L $(3) -name $(2) -and -not -name ".*") \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Scan through each directory of $(1) looking for files | |
| ## that match $(2) using $(wildcard). Useful for seeing if | |
| ## a given directory or one of its parents contains | |
| ## a particular file. Returns the first match found, | |
| ## starting furthest from the root. | |
| ########################################################### | |
| define find-parent-file | |
| $(strip \ | |
| $(eval _fpf := $(wildcard $(foreach f, $(2), $(strip $(1))/$(f)))) \ | |
| $(if $(_fpf),$(_fpf), \ | |
| $(if $(filter-out ./ .,$(1)), \ | |
| $(call find-parent-file,$(patsubst %/,%,$(dir $(1))),$(2)) \ | |
| ) \ | |
| ) \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Function we can evaluate to introduce a dynamic dependency | |
| ########################################################### | |
| define add-dependency | |
| $(1): $(2) | |
| endef | |
| ########################################################### | |
| ## Reverse order of a list | |
| ########################################################### | |
| define reverse-list | |
| $(if $(1),$(call reverse-list,$(wordlist 2,$(words $(1)),$(1)))) $(firstword $(1)) | |
| endef | |
| ########################################################### | |
| ## The intermediates directory. Where object files go for | |
| ## a given target. We could technically get away without | |
| ## the "_intermediates" suffix on the directory, but it's | |
| ## nice to be able to grep for that string to find out if | |
| ## anyone's abusing the system. | |
| ########################################################### | |
| # $(1): target class, like "APPS" | |
| # $(2): target name, like "NotePad" | |
| # $(3): if non-empty, this is a HOST target. | |
| # $(4): if non-empty, force the intermediates to be COMMON | |
| # $(5): if non-empty, force the intermediates to be for the 2nd arch | |
| # $(6): if non-empty, force the intermediates to be for the host cross os | |
| define intermediates-dir-for | |
| $(strip \ | |
| $(eval _idfClass := $(strip $(1))) \ | |
| $(if $(_idfClass),, \ | |
| $(error $(LOCAL_PATH): Class not defined in call to intermediates-dir-for)) \ | |
| $(eval _idfName := $(strip $(2))) \ | |
| $(if $(_idfName),, \ | |
| $(error $(LOCAL_PATH): Name not defined in call to intermediates-dir-for)) \ | |
| $(eval _idfPrefix := $(if $(strip $(3)),$(if $(strip $(6)),HOST_CROSS,HOST),TARGET)) \ | |
| $(eval _idf2ndArchPrefix := $(if $(strip $(5)),$(TARGET_2ND_ARCH_VAR_PREFIX))) \ | |
| $(if $(filter $(_idfPrefix)-$(_idfClass),$(COMMON_MODULE_CLASSES))$(4), \ | |
| $(eval _idfIntBase := $($(_idfPrefix)_OUT_COMMON_INTERMEDIATES)) \ | |
| ,$(if $(filter $(_idfClass),SHARED_LIBRARIES STATIC_LIBRARIES EXECUTABLES GYP),\ | |
| $(eval _idfIntBase := $($(_idf2ndArchPrefix)$(_idfPrefix)_OUT_INTERMEDIATES)) \ | |
| ,$(eval _idfIntBase := $($(_idfPrefix)_OUT_INTERMEDIATES)) \ | |
| ) \ | |
| ) \ | |
| $(_idfIntBase)/$(_idfClass)/$(_idfName)_intermediates \ | |
| ) | |
| endef | |
| # Uses LOCAL_MODULE_CLASS, LOCAL_MODULE, and LOCAL_IS_HOST_MODULE | |
| # to determine the intermediates directory. | |
| # | |
| # $(1): if non-empty, force the intermediates to be COMMON | |
| # $(2): if non-empty, force the intermediates to be for the 2nd arch | |
| # $(3): if non-empty, force the intermediates to be for the host cross os | |
| define local-intermediates-dir | |
| $(strip \ | |
| $(if $(strip $(LOCAL_MODULE_CLASS)),, \ | |
| $(error $(LOCAL_PATH): LOCAL_MODULE_CLASS not defined before call to local-intermediates-dir)) \ | |
| $(if $(strip $(LOCAL_MODULE)),, \ | |
| $(error $(LOCAL_PATH): LOCAL_MODULE not defined before call to local-intermediates-dir)) \ | |
| $(call intermediates-dir-for,$(LOCAL_MODULE_CLASS),$(LOCAL_MODULE),$(LOCAL_IS_HOST_MODULE),$(1),$(2),$(3)) \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## The generated sources directory. Placing generated | |
| ## source files directly in the intermediates directory | |
| ## causes problems for multiarch builds, where there are | |
| ## two intermediates directories for a single target. Put | |
| ## them in a separate directory, and they will be copied to | |
| ## each intermediates directory automatically. | |
| ########################################################### | |
| # $(1): target class, like "APPS" | |
| # $(2): target name, like "NotePad" | |
| # $(3): if non-empty, this is a HOST target. | |
| # $(4): if non-empty, force the generated sources to be COMMON | |
| define generated-sources-dir-for | |
| $(strip \ | |
| $(eval _idfClass := $(strip $(1))) \ | |
| $(if $(_idfClass),, \ | |
| $(error $(LOCAL_PATH): Class not defined in call to generated-sources-dir-for)) \ | |
| $(eval _idfName := $(strip $(2))) \ | |
| $(if $(_idfName),, \ | |
| $(error $(LOCAL_PATH): Name not defined in call to generated-sources-dir-for)) \ | |
| $(eval _idfPrefix := $(if $(strip $(3)),HOST,TARGET)) \ | |
| $(if $(filter $(_idfPrefix)-$(_idfClass),$(COMMON_MODULE_CLASSES))$(4), \ | |
| $(eval _idfIntBase := $($(_idfPrefix)_OUT_GEN_COMMON)) \ | |
| , \ | |
| $(eval _idfIntBase := $($(_idfPrefix)_OUT_GEN)) \ | |
| ) \ | |
| $(_idfIntBase)/$(_idfClass)/$(_idfName)_intermediates \ | |
| ) | |
| endef | |
| # Uses LOCAL_MODULE_CLASS, LOCAL_MODULE, and LOCAL_IS_HOST_MODULE | |
| # to determine the generated sources directory. | |
| # | |
| # $(1): if non-empty, force the intermediates to be COMMON | |
| define local-generated-sources-dir | |
| $(strip \ | |
| $(if $(strip $(LOCAL_MODULE_CLASS)),, \ | |
| $(error $(LOCAL_PATH): LOCAL_MODULE_CLASS not defined before call to local-generated-sources-dir)) \ | |
| $(if $(strip $(LOCAL_MODULE)),, \ | |
| $(error $(LOCAL_PATH): LOCAL_MODULE not defined before call to local-generated-sources-dir)) \ | |
| $(call generated-sources-dir-for,$(LOCAL_MODULE_CLASS),$(LOCAL_MODULE),$(LOCAL_IS_HOST_MODULE),$(1)) \ | |
| ) | |
| endef | |
| ########################################################### | |
| ## Convert "path/to/libXXX.so" to "-lXXX". | |
| ## Any "path/to/libXXX.a" elements pass through unchanged. | |
| ########################################################### | |
| define normalize-libraries | |
| $(foreach so,$(filter %.so,$(1)),-l$(patsubst lib%.so,%,$(notdir $(so))))\ | |
| $(filter-out %.so,$(1)) | |
| endef | |
| # TODO: change users to call the common version. | |
| define normalize-host-libraries | |
| $(call normalize-libraries,$(1)) | |
| endef | |
| define normalize-target-libraries | |
| $(call normalize-libraries,$(1)) | |
| endef | |
| ########################################################### | |
| ## Convert a list of short module names (e.g., "framework", "Browser") | |
| ## into the list of files that are built for those modules. | |
| ## NOTE: this won't return reliable results until after all | |
| ## sub-makefiles have been included. | |
| ## $(1): target list | |
| ########################################################### | |
| define module-built-files | |
| $(foreach module,$(1),$(ALL_MODULES.$(module).BUILT)) | |
| endef | |
| ########################################################### | |
| ## Convert a list of short modules names (e.g., "framework", "Browser") | |
| ## into the list of files that are installed for those modules. | |
| ## NOTE: this won't return reliable results until after all | |
| ## sub-makefiles have been included. | |
| ## $(1): target list | |
| ########################################################### | |
| define module-installed-files | |
| $(foreach module,$(1),$(ALL_MODULES.$(module).INSTALLED)) | |
| endef | |
| ########################################################### | |
| ## Convert a list of short modules names (e.g., "framework", "Browser") | |
| ## into the list of files that should be used when linking | |
| ## against that module as a public API. | |
| ## TODO: Allow this for more than JAVA_LIBRARIES modules | |
| ## NOTE: this won't return reliable results until after all | |
| ## sub-makefiles have been included. | |
| ## $(1): target list | |
| ########################################################### | |
| define module-stubs-files | |
| $(foreach module,$(1),$(ALL_MODULES.$(module).STUBS)) | |
| endef | |
| ########################################################### | |
| ## Evaluates to the timestamp file for a doc module, which | |
| ## is the dependency that should be used. | |
| ## $(1): doc module | |
| ########################################################### | |
| define doc-timestamp-for | |
| $(OUT_DOCS)/$(strip $(1))-timestamp | |
| endef | |
| ########################################################### | |
| ## Convert "core ext framework" to "out/.../javalib.jar ..." | |
| ## $(1): library list | |
| ## $(2): Non-empty if IS_HOST_MODULE | |
| ########################################################### | |
| # $(1): library name | |
| # $(2): Non-empty if IS_HOST_MODULE | |
| define _java-lib-dir | |
| $(call intermediates-dir-for, \ | |
| JAVA_LIBRARIES,$(1),$(2),COMMON) | |
| endef | |
| # $(1): library name | |
| # $(2): Non-empty if IS_HOST_MODULE | |
| define _java-lib-full-classes.jar | |
| $(call _java-lib-dir,$(1),$(2))/classes$(COMMON_JAVA_PACKAGE_SUFFIX) | |
| endef | |
| # $(1): library name list | |
| # $(2): Non-empty if IS_HOST_MODULE | |
| define java-lib-files | |
| $(foreach lib,$(1),$(call _java-lib-full-classes.jar,$(lib),$(2))) | |
| endef | |
| # $(1): library name | |
| # $(2): Non-empty if IS_HOST_MODULE | |
| define _java-lib-full-dep | |
| $(call _java-lib-dir,$(1),$(2))/$(if $(2),javalib,classes)$(COMMON_JAVA_PACKAGE_SUFFIX) | |
| endef | |
| # $(1): library name list | |
| # $(2): Non-empty if IS_HOST_MODULE | |
| define java-lib-deps | |
| $(foreach lib,$(1),$(call _java-lib-full-dep,$(lib),$(2))) | |
| endef | |
| ########################################################### | |
| ## Convert "core ext framework" to "out/.../classes.jack ..." | |
| ## $(1): library list | |
| ## $(2): Non-empty if IS_HOST_MODULE | |
| ########################################################### | |
| # $(1): library name | |
| # $(2): Non-empty if IS_HOST_MODULE | |
| define _jack-lib-full-classes | |
| $(call _java-lib-dir,$(1),$(2))/classes.jack | |
| endef | |
| # $(1): library name list | |
| # $(2): Non-empty if IS_HOST_MODULE | |
| define jack-lib-files | |
| $(foreach lib,$(1),$(call _jack-lib-full-classes,$(lib),$(2))) | |
| endef | |
| # $(1): library name | |
| # $(2): Non-empty if IS_HOST_MODULE | |
| define _jack-lib-full-dep | |
| $(call _jack-lib-full-classes,$(1),$(2)) | |
| endef | |
| # $(1): library name list | |
| # $(2): Non-empty if IS_HOST_MODULE | |
| define jack-lib-deps | |
| $(foreach lib,$(1),$(call _jack-lib-full-dep,$(lib),$(2))) | |
| endef | |
| ########################################################### | |
| ## Run rot13 on a string | |
| ## $(1): the string. Must be one line. | |
| ########################################################### | |
| define rot13 | |
| $(shell echo $(1) | tr 'a-zA-Z' 'n-za-mN-ZA-M') | |
| endef | |
| ########################################################### | |
| ## Returns true if $(1) and $(2) are equal. Returns | |
| ## the empty string if they are not equal. | |
| ########################################################### | |
| define streq | |
| $(strip $(if $(strip $(1)),\ | |
| $(if $(strip $(2)),\ | |
| $(if $(filter-out __,_$(subst $(strip $(1)),,$(strip $(2)))$(subst $(strip $(2)),,$(strip $(1)))_),,true), \ | |
| ),\ | |
| $(if $(strip $(2)),\ | |
| ,\ | |
| true)\ | |
| )) | |
| endef | |
| ########################################################### | |
| ## Convert "a b c" into "a:b:c" | |
| ########################################################### | |
| define normalize-path-list | |
| $(subst $(space),:,$(strip $(1))) | |
| endef | |
| ########################################################### | |
| ## Read the word out of a colon-separated list of words. | |
| ## This has the same behavior as the built-in function | |
| ## $(word n,str). | |
| ## | |
| ## The individual words may not contain spaces. | |
| ## | |
| ## $(1): 1 based index | |
| ## $(2): value of the form a:b:c... | |
| ########################################################### | |
| define word-colon | |
| $(word $(1),$(subst :,$(space),$(2))) | |
| endef | |
| ########################################################### | |
| ## Convert "a=b c= d e = f" into "a=b c=d e=f" | |
| ## | |
| ## $(1): list to collapse | |
| ## $(2): if set, separator word; usually "=", ":", or ":=" | |
| ## Defaults to "=" if not set. | |
| ########################################################### | |
| define collapse-pairs | |
| $(eval _cpSEP := $(strip $(if $(2),$(2),=)))\ | |
| $(subst $(space)$(_cpSEP)$(space),$(_cpSEP),$(strip \ | |
| $(subst $(_cpSEP), $(_cpSEP) ,$(1)))) | |
| endef | |
| ########################################################### | |
| ## Given a list of pairs, if multiple pairs have the same | |
| ## first components, keep only the first pair. | |
| ## | |
| ## $(1): list of pairs | |
| ## $(2): the separator word, such as ":", "=", etc. | |
| define uniq-pairs-by-first-component | |
| $(eval _upbfc_fc_set :=)\ | |
| $(strip $(foreach w,$(1), $(eval _first := $(word 1,$(subst $(2),$(space),$(w))))\ | |
| $(if $(filter $(_upbfc_fc_set),$(_first)),,$(w)\ | |
| $(eval _upbfc_fc_set += $(_first)))))\ | |
| $(eval _upbfc_fc_set :=)\ | |
| $(eval _first:=) | |
| endef | |
| ########################################################### | |
| ## MODULE_TAG set operations | |
| ########################################################### | |
| # Given a list of tags, return the targets that specify | |
| # any of those tags. | |
| # $(1): tag list | |
| define modules-for-tag-list | |
| $(sort $(foreach tag,$(1),$(foreach m,$(ALL_MODULE_NAME_TAGS.$(tag)),$(ALL_MODULES.$(m).INSTALLED)))) | |
| endef | |
| # Same as modules-for-tag-list, but operates on | |
| # ALL_MODULE_NAME_TAGS. | |
| # $(1): tag list | |
| define module-names-for-tag-list | |
| $(sort $(foreach tag,$(1),$(ALL_MODULE_NAME_TAGS.$(tag)))) | |
| endef | |
| # Given an accept and reject list, find the matching | |
| # set of targets. If a target has multiple tags and | |
| # any of them are rejected, the target is rejected. | |
| # Reject overrides accept. | |
| # $(1): list of tags to accept | |
| # $(2): list of tags to reject | |
| #TODO(dbort): do $(if $(strip $(1)),$(1),$(ALL_MODULE_TAGS)) | |
| #TODO(jbq): as of 20100106 nobody uses the second parameter | |
| define get-tagged-modules | |
| $(filter-out \ | |
| $(call modules-for-tag-list,$(2)), \ | |
| $(call modules-for-tag-list,$(1))) | |
| endef | |
| ########################################################### | |
| ## Append a leaf to a base path. Properly deals with | |
| ## base paths ending in /. | |
| ## | |
| ## $(1): base path | |
| ## $(2): leaf path | |
| ########################################################### | |
| define append-path | |
| $(subst //,/,$(1)/$(2)) | |
| endef | |
| ########################################################### | |
| ## Package filtering | |
| ########################################################### | |
| # Given a list of installed modules (short or long names) | |
| # return a list of the packages (yes, .apk packages, not | |
| # modules in general) that are overridden by this list and, | |
| # therefore, should not be installed. | |
| # $(1): mixed list of installed modules | |
| # TODO: This is fragile; find a reliable way to get this information. | |
| define _get-package-overrides | |
| $(eval ### Discard any words containing slashes, unless they end in .apk, \ | |
| ### in which case trim off the directory component and the suffix. \ | |
| ### If there are no slashes, keep the entire word.) | |
| $(eval _gpo_names := $(subst /,@@@ @@@,$(1))) | |
| $(eval _gpo_names := \ | |
| $(filter %.apk,$(_gpo_names)) \ | |
| $(filter-out %@@@ @@@%,$(_gpo_names))) | |
| $(eval _gpo_names := $(patsubst %.apk,%,$(_gpo_names))) | |
| $(eval _gpo_names := $(patsubst @@@%,%,$(_gpo_names))) | |
| $(eval ### Remove any remaining words that contain dots.) | |
| $(eval _gpo_names := $(subst .,@@@ @@@,$(_gpo_names))) | |
| $(eval _gpo_names := $(filter-out %@@@ @@@%,$(_gpo_names))) | |
| $(eval ### Now we have a list of any words that could possibly refer to \ | |
| ### packages, although there may be words that do not. Only \ | |
| ### real packages will be present under PACKAGES.*, though.) | |
| $(foreach _gpo_name,$(_gpo_names),$(PACKAGES.$(_gpo_name).OVERRIDES)) | |
| endef | |
| define get-package-overrides | |
| $(sort $(strip $(call _get-package-overrides,$(1)))) | |
| endef | |
| ########################################################### | |
| ## Output the command lines, or not | |
| ########################################################### | |
| ifeq ($(strip $(SHOW_COMMANDS)),) | |
| define pretty | |
| @echo $1 | |
| endef | |
| else | |
| define pretty | |
| endef | |
| endif | |
| ########################################################### | |
| ## Commands for munging the dependency files GCC generates | |
| ########################################################### | |
| # $(1): the input .d file | |
| # $(2): the output .P file | |
| define transform-d-to-p-args | |
| $(hide) cp $(1) $(2); \ | |
| sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \ | |
| -e '/^$$/ d' -e 's/$$/ :/' < $(1) >> $(2); \ | |
| rm -f $(1) | |
| endef | |
| define transform-d-to-p | |
| $(call transform-d-to-p-args,$(@:%.o=%.d),$(@:%.o=%.P)) | |
| endef | |
| ########################################################### | |
| ## Commands for running lex | |
| ########################################################### | |
| define transform-l-to-cpp | |
| @echo "Lex: $(PRIVATE_MODULE) <= $<" | |
| @mkdir -p $(dir $@) | |
| $(hide) $(LEX) -o$@ $< | |
| endef | |
| ########################################################### | |
| ## Commands for running yacc | |
| ## | |
| ## Because the extension of c++ files can change, the | |
| ## extension must be specified in $1. | |
| ## E.g, "$(call transform-y-to-cpp,.cpp)" | |
| ########################################################### | |
| define transform-y-to-cpp | |
| @echo "Yacc: $(PRIVATE_MODULE) <= $<" | |
| @mkdir -p $(dir $@) | |
| $(YACC) $(PRIVATE_YACCFLAGS) -o $@ $< | |
| touch $(@:$1=$(YACC_HEADER_SUFFIX)) | |
| echo '#ifndef '$(@F:$1=_h) > $(@:$1=.h) | |
| echo '#define '$(@F:$1=_h) >> $(@:$1=.h) | |
| cat $(@:$1=$(YACC_HEADER_SUFFIX)) >> $(@:$1=.h) | |
| echo '#endif' >> $(@:$1=.h) | |
| endef | |
| ########################################################### | |
| ## Commands to compile RenderScript to Java | |
| ########################################################### | |
| define transform-renderscripts-to-java-and-bc | |
| @echo "RenderScript: $(PRIVATE_MODULE) <= $(PRIVATE_RS_SOURCE_FILES)" | |
| $(hide) rm -rf $(PRIVATE_RS_OUTPUT_DIR) | |
| $(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/res/raw | |
| $(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/src | |
| $(hide) $(PRIVATE_RS_CC) \ | |
| -o $(PRIVATE_RS_OUTPUT_DIR)/res/raw \ | |
| -p $(PRIVATE_RS_OUTPUT_DIR)/src \ | |
| -d $(PRIVATE_RS_OUTPUT_DIR) \ | |
| -a $@ -MD \ | |
| $(addprefix -target-api , $(PRIVATE_RS_TARGET_API)) \ | |
| $(PRIVATE_RS_FLAGS) \ | |
| $(foreach inc,$(PRIVATE_RS_INCLUDES),$(addprefix -I , $(inc))) \ | |
| $(PRIVATE_RS_SOURCE_FILES) | |
| $(foreach d,$(PRIVATE_DEP_FILES),\ | |
| $(call transform-d-to-p-args,$(d),$(d:%.d=%.P))$(newline)) | |
| $(hide) mkdir -p $(dir $@) | |
| $(hide) touch $@ | |
| endef | |
| define transform-bc-to-so | |
| @echo "Renderscript compatibility: $(notdir $@) <= $(notdir $<)" | |
| $(hide) mkdir -p $(dir $@) | |
| $(hide) $(BCC_COMPAT) -O3 -o $(dir $@)/$(notdir $(<:.bc=.o)) -fPIC -shared \ | |
| -rt-path $(RS_PREBUILT_CLCORE) -mtriple $(RS_COMPAT_TRIPLE) $< | |
| $(hide) $(PRIVATE_CXX) -shared -Wl,-soname,$(notdir $@) -nostdlib \ | |
| -Wl,-rpath,\$$ORIGIN/../lib \ | |
| $(dir $@)/$(notdir $(<:.bc=.o)) \ | |
| $(RS_PREBUILT_COMPILER_RT) \ | |
| -o $@ $(TARGET_GLOBAL_LDFLAGS) -Wl,--hash-style=sysv -L prebuilts/gcc/ \ | |
| $(RS_PREBUILT_LIBPATH) -L $(TARGET_OUT_INTERMEDIATE_LIBRARIES) \ | |
| -lRSSupport -lm -lc | |
| endef | |
| ########################################################### | |
| ## Commands to compile RenderScript to C++ | |
| ########################################################### | |
| define transform-renderscripts-to-cpp-and-bc | |
| @echo "RenderScript: $(PRIVATE_MODULE) <= $(PRIVATE_RS_SOURCE_FILES)" | |
| $(hide) rm -rf $(PRIVATE_RS_OUTPUT_DIR) | |
| $(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/ | |
| $(hide) $(PRIVATE_RS_CC) \ | |
| -o $(PRIVATE_RS_OUTPUT_DIR)/ \ | |
| -d $(PRIVATE_RS_OUTPUT_DIR) \ | |
| -a $@ -MD \ | |
| -reflect-c++ \ | |
| $(addprefix -target-api , $(PRIVATE_RS_TARGET_API)) \ | |
| $(PRIVATE_RS_FLAGS) \ | |
| $(addprefix -I , $(PRIVATE_RS_INCLUDES)) \ | |
| $(PRIVATE_RS_SOURCE_FILES) | |
| $(foreach d,$(PRIVATE_DEP_FILES),\ | |
| $(call transform-d-to-p-args,$(d),$(d:%.d=%.P))$(newline)) | |
| $(hide) mkdir -p $(dir $@) | |
| $(hide) touch $@ | |
| endef | |
| ########################################################### | |
| ## Commands for running aidl | |
| ########################################################### | |
| define transform-aidl-to-java | |
| @mkdir -p $(dir $@) | |
| @echo "Aidl: $(PRIVATE_MODULE) <= $<" | |
| $(hide) $(AIDL) -d$(patsubst %.java,%.P,$@) $(PRIVATE_AIDL_FLAGS) $< $@ | |
| endef | |
| #$(AIDL) $(PRIVATE_AIDL_FLAGS) $< - | indent -nut -br -npcs -l1000 > $@ | |
| ########################################################### | |
| ## Commands for running java-event-log-tags.py | |
| ########################################################### | |
| define transform-logtags-to-java | |
| @mkdir -p $(dir $@) | |
| @echo "logtags: $@ <= $<" | |
| $(hide) $(JAVATAGS) -o $@ $^ | |
| endef | |
| ########################################################### | |
| ## Commands for running protoc to compile .proto into .java | |
| ########################################################### | |
| define transform-proto-to-java | |
| @mkdir -p $(dir $@) | |
| @echo "Protoc: $@ <= $(PRIVATE_PROTO_SRC_FILES)" | |
| @rm -rf $(PRIVATE_PROTO_JAVA_OUTPUT_DIR) | |
| @mkdir -p $(PRIVATE_PROTO_JAVA_OUTPUT_DIR) | |
| $(hide) for f in $(PRIVATE_PROTO_SRC_FILES); do \ | |
| $(PROTOC) \ | |
| $(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \ | |
| $(PRIVATE_PROTO_JAVA_OUTPUT_OPTION)="$(PRIVATE_PROTO_JAVA_OUTPUT_PARAMS):$(PRIVATE_PROTO_JAVA_OUTPUT_DIR)" \ | |
| $(PRIVATE_PROTOC_FLAGS) \ | |
| $$f || exit 33; \ | |
| done | |
| $(hide) touch $@ | |
| endef | |
| ###################################################################### | |
| ## Commands for running protoc to compile .proto into .pb.cc (or.pb.c) and .pb.h | |
| ###################################################################### | |
| define transform-proto-to-cc | |
| @echo "Protoc: $@ <= $<" | |
| @mkdir -p $(dir $@) | |
| $(hide) $(PROTOC) \ | |
| $(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \ | |
| $(PRIVATE_PROTOC_FLAGS) \ | |
| $< | |
| endef | |
| ###################################################################### | |
| ## Commands for generating DBus adaptors from .dbus-xml files. | |
| ###################################################################### | |
| define generate-dbus-adaptors | |
| @echo "Generating DBus adaptors for $(PRIVATE_MODULE)" | |
| @mkdir -p $(dir $@) | |
| $(hide) $(DBUS_GENERATOR) \ | |
| --service-config=$(PRIVATE_DBUS_SERVICE_CONFIG) \ | |
| --adaptor=$@ \ | |
| $< | |
| endef | |
| ###################################################################### | |
| ## Commands for generating DBus proxies from .dbus-xml files. | |
| ###################################################################### | |
| define generate-dbus-proxies | |
| @echo "Generating DBus proxies for $(PRIVATE_MODULE)" | |
| @mkdir -p $(dir $@) | |
| $(hide) $(DBUS_GENERATOR) \ | |
| --service-config=$(PRIVATE_DBUS_SERVICE_CONFIG) \ | |
| --proxy=$@ \ | |
| $(filter %.dbus-xml,$^) | |
| endef | |
| ########################################################### | |
| ## Commands for running gcc to compile a C++ file | |
| ########################################################### | |
| define transform-cpp-to-o | |
| @echo "target $(PRIVATE_ARM_MODE) C++: $(PRIVATE_MODULE) <= $<" | |
| @mkdir -p $(dir $@) | |
| $(hide) $(PRIVATE_CXX) \ | |
| $(addprefix -I , $(PRIVATE_C_INCLUDES)) \ | |
| $(shell cat $(PRIVATE_IMPORT_INCLUDES)) \ | |
| $(addprefix -isystem ,\ | |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ | |
| $(filter-out $(PRIVATE_C_INCLUDES), \ | |
| $(PRIVATE_TARGET_PROJECT_INCLUDES) \ | |
| $(PRIVATE_TARGET_C_INCLUDES)))) \ | |
| -c \ | |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ | |
| $(PRIVATE_TARGET_GLOBAL_CFLAGS) \ | |
| $(PRIVATE_TARGET_GLOBAL_CPPFLAGS) \ | |
| $(PRIVATE_ARM_CFLAGS) \ | |
| ) \ | |
| $(PRIVATE_RTTI_FLAG) \ | |
| $(PRIVATE_CFLAGS) \ | |
| $(PRIVATE_CPPFLAGS) \ | |
| $(PRIVATE_DEBUG_CFLAGS) \ | |
| $(PRIVATE_CFLAGS_NO_OVERRIDE) \ | |
| $(PRIVATE_CPPFLAGS_NO_OVERRIDE) \ | |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< | |
| $(transform-d-to-p) | |
| endef | |
| ########################################################### | |
| ## Commands for running gcc to compile a C file | |
| ########################################################### | |
| # $(1): extra flags | |
| define transform-c-or-s-to-o-no-deps | |
| @mkdir -p $(dir $@) | |
| $(hide) $(PRIVATE_CC) \ | |
| $(addprefix -I , $(PRIVATE_C_INCLUDES)) \ | |
| $(shell cat $(PRIVATE_IMPORT_INCLUDES)) \ | |
| $(addprefix -isystem ,\ | |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ | |
| $(filter-out $(PRIVATE_C_INCLUDES), \ | |
| $(PRIVATE_TARGET_PROJECT_INCLUDES) \ | |
| $(PRIVATE_TARGET_C_INCLUDES)))) \ | |
| -c \ | |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ | |
| $(PRIVATE_TARGET_GLOBAL_CFLAGS) \ | |
| $(PRIVATE_TARGET_GLOBAL_CONLYFLAGS) \ | |
| $(PRIVATE_ARM_CFLAGS) \ | |
| ) \ | |
| $(1) \ | |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< | |
| endef | |
| define transform-c-to-o-no-deps | |
| @echo "target $(PRIVATE_ARM_MODE) C: $(PRIVATE_MODULE) <= $<" | |
| $(call transform-c-or-s-to-o-no-deps, \ | |
| $(PRIVATE_CFLAGS) \ | |
| $(PRIVATE_CONLYFLAGS) \ | |
| $(PRIVATE_DEBUG_CFLAGS) \ | |
| $(PRIVATE_CFLAGS_NO_OVERRIDE)) | |
| endef | |
| define transform-s-to-o-no-deps | |
| @echo "target asm: $(PRIVATE_MODULE) <= $<" | |
| $(call transform-c-or-s-to-o-no-deps, $(PRIVATE_ASFLAGS)) | |
| endef | |
| define transform-c-to-o | |
| $(transform-c-to-o-no-deps) | |
| $(transform-d-to-p) | |
| endef | |
| define transform-s-to-o | |
| $(transform-s-to-o-no-deps) | |
| $(transform-d-to-p) | |
| endef | |
| # YASM compilation | |
| define transform-asm-to-o | |
| @mkdir -p $(dir $@) | |
| $(hide) $(YASM) \ | |
| $(addprefix -I , $(PRIVATE_C_INCLUDES)) \ | |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_YASM_FLAGS) \ | |
| $(PRIVATE_ASFLAGS) \ | |
| -o $@ $< | |
| endef | |
| ########################################################### | |
| ## Commands for running gcc to compile an Objective-C file | |
| ## This should never happen for target builds but this | |
| ## will error at build time. | |
| ########################################################### | |
| define transform-m-to-o-no-deps | |
| @echo "target ObjC: $(PRIVATE_MODULE) <= $<" | |
| $(call transform-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_DEBUG_CFLAGS)) | |
| endef | |
| define transform-m-to-o | |
| $(transform-m-to-o-no-deps) | |
| $(transform-d-to-p) | |
| endef | |
| ########################################################### | |
| ## Commands for running gcc to compile a host C++ file | |
| ########################################################### | |
| define transform-host-cpp-to-o | |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) C++: $(PRIVATE_MODULE) <= $<" | |
| @mkdir -p $(dir $@) | |
| $(hide) $(PRIVATE_CXX) \ | |
| $(addprefix -I , $(PRIVATE_C_INCLUDES)) \ | |
| $(shell cat $(PRIVATE_IMPORT_INCLUDES)) \ | |
| $(addprefix -isystem ,\ | |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ | |
| $(filter-out $(PRIVATE_C_INCLUDES), \ | |
| $($(PRIVATE_PREFIX)PROJECT_INCLUDES) \ | |
| $(PRIVATE_HOST_C_INCLUDES)))) \ | |
| -c \ | |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ | |
| $(PRIVATE_HOST_GLOBAL_CFLAGS) \ | |
| $(PRIVATE_HOST_GLOBAL_CPPFLAGS) \ | |
| ) \ | |
| $(PRIVATE_CFLAGS) \ | |
| $(PRIVATE_CPPFLAGS) \ | |
| $(PRIVATE_DEBUG_CFLAGS) \ | |
| $(PRIVATE_CFLAGS_NO_OVERRIDE) \ | |
| $(PRIVATE_CPPFLAGS_NO_OVERRIDE) \ | |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< | |
| $(transform-d-to-p) | |
| endef | |
| ########################################################### | |
| ## Commands for running gcc to compile a host C file | |
| ########################################################### | |
| # $(1): extra flags | |
| define transform-host-c-or-s-to-o-no-deps | |
| @mkdir -p $(dir $@) | |
| $(hide) $(PRIVATE_CC) \ | |
| $(addprefix -I , $(PRIVATE_C_INCLUDES)) \ | |
| $(shell cat $(PRIVATE_IMPORT_INCLUDES)) \ | |
| $(addprefix -isystem ,\ | |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ | |
| $(filter-out $(PRIVATE_C_INCLUDES), \ | |
| $($(PRIVATE_PREFIX)PROJECT_INCLUDES) \ | |
| $(PRIVATE_HOST_C_INCLUDES)))) \ | |
| -c \ | |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ | |
| $(PRIVATE_HOST_GLOBAL_CFLAGS) \ | |
| $(PRIVATE_HOST_GLOBAL_CONLYFLAGS) \ | |
| ) \ | |
| $(1) \ | |
| $(PRIVATE_CFLAGS_NO_OVERRIDE) \ | |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< | |
| endef | |
| define transform-host-c-to-o-no-deps | |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) C: $(PRIVATE_MODULE) <= $<" | |
| $(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_CONLYFLAGS) $(PRIVATE_DEBUG_CFLAGS)) | |
| endef | |
| define transform-host-s-to-o-no-deps | |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) asm: $(PRIVATE_MODULE) <= $<" | |
| $(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_ASFLAGS)) | |
| endef | |
| define transform-host-c-to-o | |
| $(transform-host-c-to-o-no-deps) | |
| $(transform-d-to-p) | |
| endef | |
| define transform-host-s-to-o | |
| $(transform-host-s-to-o-no-deps) | |
| $(transform-d-to-p) | |
| endef | |
| ########################################################### | |
| ## Commands for running gcc to compile a host Objective-C file | |
| ########################################################### | |
| define transform-host-m-to-o-no-deps | |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) ObjC: $(PRIVATE_MODULE) <= $<" | |
| $(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_DEBUG_CFLAGS)) | |
| endef | |
| define transform-host-m-to-o | |
| $(transform-host-m-to-o-no-deps) | |
| $(transform-d-to-p) | |
| endef | |
| ########################################################### | |
| ## Commands for running gcc to compile a host Objective-C++ file | |
| ########################################################### | |
| define transform-host-mm-to-o | |
| $(transform-host-cpp-to-o) | |
| endef | |
| ########################################################### | |
| ## Rules to compile a single C/C++ source with ../ in the path | |
| ########################################################### | |
| # Replace "../" in object paths with $(DOTDOT_REPLACEMENT). | |
| DOTDOT_REPLACEMENT := dotdot/ | |
| ## Rule to compile a C++ source file with ../ in the path. | |
| ## Must be called with $(eval). | |
| # $(1): the C++ source file in LOCAL_SRC_FILES. | |
| # $(2): the additional dependencies. | |
| # $(3): the variable name to collect the output object file. | |
| define compile-dotdot-cpp-file | |
| o := $(intermediates)/$(patsubst %$(LOCAL_CPP_EXTENSION),%.o,$(subst ../,$(DOTDOT_REPLACEMENT),$(1))) | |
| $$(o) : $(TOPDIR)$(LOCAL_PATH)/$(1) $(2) | |
| $$(transform-$$(PRIVATE_HOST)cpp-to-o) | |
| -include $$(o:%.o=%.P) | |
| $(3) += $$(o) | |
| endef | |
| ## Rule to compile a C source file with ../ in the path. | |
| ## Must be called with $(eval). | |
| # $(1): the C source file in LOCAL_SRC_FILES. | |
| # $(2): the additional dependencies. | |
| # $(3): the variable name to collect the output object file. | |
| define compile-dotdot-c-file | |
| o := $(intermediates)/$(patsubst %.c,%.o,$(subst ../,$(DOTDOT_REPLACEMENT),$(1))) | |
| $$(o) : $(TOPDIR)$(LOCAL_PATH)/$(1) $(2) | |
| $$(transform-$$(PRIVATE_HOST)c-to-o) | |
| -include $$(o:%.o=%.P) | |
| $(3) += $$(o) | |
| endef | |
| ## Rule to compile a .S source file with ../ in the path. | |
| ## Must be called with $(eval). | |
| # $(1): the .S source file in LOCAL_SRC_FILES. | |
| # $(2): the additional dependencies. | |
| # $(3): the variable name to collect the output object file. | |
| define compile-dotdot-s-file | |
| o := $(intermediates)/$(patsubst %.S,%.o,$(subst ../,$(DOTDOT_REPLACEMENT),$(1))) | |
| $$(o) : $(TOPDIR)$(LOCAL_PATH)/$(1) $(2) | |
| $$(transform-$$(PRIVATE_HOST)s-to-o) | |
| -include $$(o:%.o=%.P) | |
| $(3) += $$(o) | |
| endef | |
| ## Rule to compile a .s source file with ../ in the path. | |
| ## Must be called with $(eval). | |
| # $(1): the .s source file in LOCAL_SRC_FILES. | |
| # $(2): the additional dependencies. | |
| # $(3): the variable name to collect the output object file. | |
| define compile-dotdot-s-file-no-deps | |
| o := $(intermediates)/$(patsubst %.s,%.o,$(subst ../,$(DOTDOT_REPLACEMENT),$(1))) | |
| $$(o) : $(TOPDIR)$(LOCAL_PATH)/$(1) $(2) | |
| $$(transform-$$(PRIVATE_HOST)s-to-o-no-deps) | |
| $(3) += $$(o) | |
| endef | |
| ########################################################### | |
| ## Commands for running ar | |
| ########################################################### | |
| define _concat-if-arg2-not-empty | |
| $(if $(2),$(hide) $(1) $(2)) | |
| endef | |
| # Split long argument list into smaller groups and call the command repeatedly | |
| # Call the command at least once even if there are no arguments, as otherwise | |
| # the output file won't be created. | |
| # | |
| # $(1): the command without arguments | |
| # $(2): the arguments | |
| define split-long-arguments | |
| $(hide) $(1) $(wordlist 1,500,$(2)) | |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 501,1000,$(2))) | |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 1001,1500,$(2))) | |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 1501,2000,$(2))) | |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 2001,2500,$(2))) | |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 2501,3000,$(2))) | |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 3001,99999,$(2))) | |
| endef | |
| # $(1): the full path of the source static library. | |
| define _extract-and-include-single-target-whole-static-lib | |
| @echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(strip $(1))]" | |
| $(hide) ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(1)))_objs;\ | |
| rm -rf $$ldir; \ | |
| mkdir -p $$ldir; \ | |
| cp $(1) $$ldir; \ | |
| lib_to_include=$$ldir/$(notdir $(1)); \ | |
| filelist=; \ | |
| subdir=0; \ | |
| for f in `$($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) t $(1)`; do \ | |
| if [ -e $$ldir/$$f ]; then \ | |
| mkdir $$ldir/$$subdir; \ | |
| ext=$$subdir/; \ | |
| subdir=$$((subdir+1)); \ | |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) m $$lib_to_include $$f; \ | |
| else \ | |
| ext=; \ | |
| fi; \ | |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) p $$lib_to_include $$f > $$ldir/$$ext$$f; \ | |
| filelist="$$filelist $$ldir/$$ext$$f"; \ | |
| done ; \ | |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_ARFLAGS) \ | |
| $(PRIVATE_ARFLAGS) $@ $$filelist | |
| endef | |
| # $(1): the full path of the source static library. | |
| define extract-and-include-whole-static-libs-first | |
| $(if $(strip $(1)), | |
| @echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(strip $(1))]" | |
| $(hide) cp $(1) $@) | |
| endef | |
| define extract-and-include-target-whole-static-libs | |
| $(call extract-and-include-whole-static-libs-first, $(firstword $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES))) | |
| $(foreach lib,$(wordlist 2,999,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)), \ | |
| $(call _extract-and-include-single-target-whole-static-lib, $(lib))) | |
| endef | |
| # Explicitly delete the archive first so that ar doesn't | |
| # try to add to an existing archive. | |
| define transform-o-to-static-lib | |
| @echo "target StaticLib: $(PRIVATE_MODULE) ($@)" | |
| @mkdir -p $(dir $@) | |
| @rm -f $@ | |
| $(extract-and-include-target-whole-static-libs) | |
| $(call split-long-arguments,$($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) \ | |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_ARFLAGS) \ | |
| $(PRIVATE_ARFLAGS) $@,$(PRIVATE_ALL_OBJECTS)) | |
| endef | |
| ########################################################### | |
| ## Commands for running host ar | |
| ########################################################### | |
| # $(1): the full path of the source static library. | |
| define _extract-and-include-single-host-whole-static-lib | |
| @echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(strip $(1))]" | |
| $(hide) ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(1)))_objs;\ | |
| rm -rf $$ldir; \ | |
| mkdir -p $$ldir; \ | |
| cp $(1) $$ldir; \ | |
| lib_to_include=$$ldir/$(notdir $(1)); \ | |
| filelist=; \ | |
| subdir=0; \ | |
| for f in `$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) t $(1) | \grep '\.o$$'`; do \ | |
| if [ -e $$ldir/$$f ]; then \ | |
| mkdir $$ldir/$$subdir; \ | |
| ext=$$subdir/; \ | |
| subdir=$$((subdir+1)); \ | |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) m $$lib_to_include $$f; \ | |
| else \ | |
| ext=; \ | |
| fi; \ | |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) p $$lib_to_include $$f > $$ldir/$$ext$$f; \ | |
| filelist="$$filelist $$ldir/$$ext$$f"; \ | |
| done ; \ | |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)GLOBAL_ARFLAGS) \ | |
| $(PRIVATE_ARFLAGS) $@ $$filelist | |
| endef | |
| define extract-and-include-host-whole-static-libs | |
| $(call extract-and-include-whole-static-libs-first, $(firstword $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES))) | |
| $(foreach lib,$(wordlist 2,999,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)), \ | |
| $(call _extract-and-include-single-host-whole-static-lib, $(lib))) | |
| endef | |
| # Explicitly delete the archive first so that ar doesn't | |
| # try to add to an existing archive. | |
| define transform-host-o-to-static-lib | |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) StaticLib: $(PRIVATE_MODULE) ($@)" | |
| @mkdir -p $(dir $@) | |
| @rm -f $@ | |
| $(extract-and-include-host-whole-static-libs) | |
| $(call split-long-arguments,$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) \ | |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)GLOBAL_ARFLAGS) \ | |
| $(PRIVATE_ARFLAGS) $@,$(PRIVATE_ALL_OBJECTS)) | |
| endef | |
| ########################################################### | |
| ## Commands for running gcc to link a shared library or package | |
| ########################################################### | |
| # ld just seems to be so finicky with command order that we allow | |
| # it to be overriden en-masse see combo/linux-arm.make for an example. | |
| ifneq ($(HOST_CUSTOM_LD_COMMAND),true) | |
| define transform-host-o-to-shared-lib-inner | |
| $(hide) $(PRIVATE_CXX) \ | |
| -Wl,-rpath-link=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_INTERMEDIATE_LIBRARIES) \ | |
| -Wl,-rpath,\$$ORIGIN/../$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \ | |
| -Wl,-rpath,\$$ORIGIN/$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \ | |
| -shared -Wl,-soname,$(notdir $@) \ | |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)GLOBAL_LD_DIRS) \ | |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ | |
| $(PRIVATE_HOST_GLOBAL_LDFLAGS) \ | |
| ) \ | |
| $(PRIVATE_LDFLAGS) \ | |
| $(PRIVATE_ALL_OBJECTS) \ | |
| -Wl,--whole-archive \ | |
| $(call normalize-host-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \ | |
| -Wl,--no-whole-archive \ | |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ | |
| $(call normalize-host-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ | |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ | |
| $(if $(filter true,$(NATIVE_COVERAGE)),-lgcov) \ | |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_HOST_LIBPROFILE_RT)) \ | |
| $(call normalize-host-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \ | |
| -o $@ \ | |
| $(PRIVATE_LDLIBS) | |
| endef | |
| endif | |
| define transform-host-o-to-shared-lib | |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) SharedLib: $(PRIVATE_MODULE) ($@)" | |
| @mkdir -p $(dir $@) | |
| $(transform-host-o-to-shared-lib-inner) | |
| endef | |
| define transform-host-o-to-package | |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) Package: $(PRIVATE_MODULE) ($@)" | |
| @mkdir -p $(dir $@) | |
| $(transform-host-o-to-shared-lib-inner) | |
| endef | |
| ########################################################### | |
| ## Commands for running gcc to link a shared library or package | |
| ########################################################### | |
| define transform-o-to-shared-lib-inner | |
| $(hide) $(PRIVATE_CXX) \ | |
| -nostdlib -Wl,-soname,$(notdir $@) \ | |
| -Wl,--gc-sections \ | |
| $(if $(filter true,$(PRIVATE_CLANG)),-shared,-Wl$(comma)-shared) \ | |
| $(PRIVATE_TARGET_GLOBAL_LD_DIRS) \ | |
| $(PRIVATE_TARGET_CRTBEGIN_SO_O) \ | |
| $(PRIVATE_ALL_OBJECTS) \ | |
| -Wl,--whole-archive \ | |
| $(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \ | |
| -Wl,--no-whole-archive \ | |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ | |
| $(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ | |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ | |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBGCOV)) \ | |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBPROFILE_RT)) \ | |
| $(PRIVATE_TARGET_LIBATOMIC) \ | |
| $(PRIVATE_TARGET_LIBGCC) \ | |
| $(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \ | |
| -o $@ \ | |
| $(PRIVATE_TARGET_GLOBAL_LDFLAGS) \ | |
| $(PRIVATE_LDFLAGS) \ | |
| $(PRIVATE_TARGET_CRTEND_SO_O) \ | |
| $(PRIVATE_LDLIBS) | |
| endef | |
| define transform-o-to-shared-lib | |
| @echo "target SharedLib: $(PRIVATE_MODULE) ($@)" | |
| @mkdir -p $(dir $@) | |
| $(transform-o-to-shared-lib-inner) | |
| endef | |
| ########################################################### | |
| ## Commands for filtering a target executable or library | |
| ########################################################### | |
| ifneq ($(TARGET_BUILD_VARIANT),user) | |
| TARGET_STRIP_EXTRA = && $(PRIVATE_OBJCOPY) --add-gnu-debuglink=$< $@ | |
| TARGET_STRIP_KEEP_SYMBOLS_EXTRA = --add-gnu-debuglink=$< | |
| endif | |
| define transform-to-stripped | |
| @echo "target Strip: $(PRIVATE_MODULE) ($@)" | |
| @mkdir -p $(dir $@) | |
| $(hide) $(PRIVATE_STRIP) --strip-all $< -o $@ \ | |
| $(if $(PRIVATE_NO_DEBUGLINK),,$(TARGET_STRIP_EXTRA)) | |
| endef | |
| define transform-to-stripped-keep-symbols | |
| @echo "target Strip (keep symbols): $(PRIVATE_MODULE) ($@)" | |
| @mkdir -p $(dir $@) | |
| $(hide) $(PRIVATE_OBJCOPY) \ | |
| `$(PRIVATE_READELF) -S $< | awk '/.debug_/ {print "-R " $$2}' | xargs` \ | |
| $(TARGET_STRIP_KEEP_SYMBOLS_EXTRA) $< $@ | |
| endef | |
| ########################################################### | |
| ## Commands for packing a target executable or library | |
| ########################################################### | |
| define pack-elf-relocations | |
| @echo "target Pack Relocations: $(PRIVATE_MODULE) ($@)" | |
| $(copy-file-to-target) | |
| $(hide) $(RELOCATION_PACKER) $@ | |
| endef | |
| ########################################################### | |
| ## Commands for running gcc to link an executable | |
| ########################################################### | |
| define transform-o-to-executable-inner | |
| $(hide) $(PRIVATE_CXX) -pie \ | |
| -nostdlib -Bdynamic \ | |
| -Wl,-dynamic-linker,$(PRIVATE_LINKER) \ | |
| -Wl,--gc-sections \ | |
| -Wl,-z,nocopyreloc \ | |
| $(PRIVATE_TARGET_GLOBAL_LD_DIRS) \ | |
| -Wl,-rpath-link=$(PRIVATE_TARGET_OUT_INTERMEDIATE_LIBRARIES) \ | |
| $(PRIVATE_TARGET_CRTBEGIN_DYNAMIC_O) \ | |
| $(PRIVATE_ALL_OBJECTS) \ | |
| -Wl,--whole-archive \ | |
| $(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \ | |
| -Wl,--no-whole-archive \ | |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ | |
| $(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ | |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ | |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBGCOV)) \ | |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBPROFILE_RT)) \ | |
| $(PRIVATE_TARGET_LIBATOMIC) \ | |
| $(PRIVATE_TARGET_LIBGCC) \ | |
| $(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \ | |
| -o $@ \ | |
| $(PRIVATE_TARGET_GLOBAL_LDFLAGS) \ | |
| $(PRIVATE_LDFLAGS) \ | |
| $(PRIVATE_TARGET_CRTEND_O) \ | |
| $(PRIVATE_LDLIBS) | |
| endef | |
| define transform-o-to-executable | |
| @echo "target Executable: $(PRIVATE_MODULE) ($@)" | |
| @mkdir -p $(dir $@) | |
| $(transform-o-to-executable-inner) | |
| endef | |
| ########################################################### | |
| ## Commands for linking a static executable. In practice, | |
| ## we only use this on arm, so the other platforms don't | |
| ## have transform-o-to-static-executable defined. | |
| ## Clang driver needs -static to create static executable. | |
| ## However, bionic/linker uses -shared to overwrite. | |
| ## Linker for x86 targets does not allow coexistance of -static and -shared, | |
| ## so we add -static only if -shared is not used. | |
| ########################################################### | |
| define transform-o-to-static-executable-inner | |
| $(hide) $(PRIVATE_CXX) \ | |
| -nostdlib -Bstatic \ | |
| $(if $(filter $(PRIVATE_LDFLAGS),-shared),,-static) \ | |
| -Wl,--gc-sections \ | |
| -o $@ \ | |
| $(PRIVATE_TARGET_GLOBAL_LD_DIRS) \ | |
| $(PRIVATE_TARGET_CRTBEGIN_STATIC_O) \ | |
| $(PRIVATE_TARGET_GLOBAL_LDFLAGS) \ | |
| $(PRIVATE_LDFLAGS) \ | |
| $(PRIVATE_ALL_OBJECTS) \ | |
| -Wl,--whole-archive \ | |
| $(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \ | |
| -Wl,--no-whole-archive \ | |
| $(call normalize-target-libraries,$(filter-out %libcompiler_rt.a,$(filter-out %libc_nomalloc.a,$(filter-out %libc.a,$(PRIVATE_ALL_STATIC_LIBRARIES))))) \ | |
| -Wl,--start-group \ | |
| $(call normalize-target-libraries,$(filter %libc.a,$(PRIVATE_ALL_STATIC_LIBRARIES))) \ | |
| $(call normalize-target-libraries,$(filter %libc_nomalloc.a,$(PRIVATE_ALL_STATIC_LIBRARIES))) \ | |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBGCOV)) \ | |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBPROFILE_RT)) \ | |
| $(PRIVATE_TARGET_LIBATOMIC) \ | |
| $(call normalize-target-libraries,$(filter %libcompiler_rt.a,$(PRIVATE_ALL_STATIC_LIBRARIES))) \ | |
| $(PRIVATE_TARGET_LIBGCC) \ | |
| -Wl,--end-group \ | |
| $(PRIVATE_TARGET_CRTEND_O) | |
| endef | |
| define transform-o-to-static-executable | |
| @echo "target StaticExecutable: $(PRIVATE_MODULE) ($@)" | |
| @mkdir -p $(dir $@) | |
| $(transform-o-to-static-executable-inner) | |
| endef | |
| ########################################################### | |
| ## Commands for running gcc to link a host executable | |
| ########################################################### | |
| ifdef BUILD_HOST_static | |
| HOST_FPIE_FLAGS := | |
| else | |
| HOST_FPIE_FLAGS := -pie | |
| # Force the correct entry point to workaround a bug in binutils that manifests with -pie | |
| ifeq ($(HOST_CROSS_OS),windows) | |
| HOST_CROSS_FPIE_FLAGS += -Wl,-e_mainCRTStartup | |
| endif | |
| endif | |
| ifneq ($(HOST_CUSTOM_LD_COMMAND),true) | |
| define transform-host-o-to-executable-inner | |
| $(hide) $(PRIVATE_CXX) \ | |
| $(PRIVATE_ALL_OBJECTS) \ | |
| -Wl,--whole-archive \ | |
| $(call normalize-host-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \ | |
| -Wl,--no-whole-archive \ | |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ | |
| $(call normalize-host-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ | |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ | |
| $(if $(filter true,$(NATIVE_COVERAGE)),-lgcov) \ | |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_HOST_LIBPROFILE_RT)) \ | |
| $(call normalize-host-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \ | |
| -Wl,-rpath-link=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_INTERMEDIATE_LIBRARIES) \ | |
| -Wl,-rpath,\$$ORIGIN/../$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \ | |
| -Wl,-rpath,\$$ORIGIN/$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \ | |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)GLOBAL_LD_DIRS) \ | |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ | |
| $(PRIVATE_HOST_GLOBAL_LDFLAGS) \ | |
| ) \ | |
| $(PRIVATE_LDFLAGS) \ | |
| -o $@ \ | |
| $(PRIVATE_LDLIBS) | |
| endef | |
| endif | |
| define transform-host-o-to-executable | |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) Executable: $(PRIVATE_MODULE) ($@)" | |
| @mkdir -p $(dir $@) | |
| $(transform-host-o-to-executable-inner) | |
| endef | |
| ########################################################### | |
| ## Commands for running javac to make .class files | |
| ########################################################### | |
| # Add BUILD_NUMBER to apps default version name if it's unbundled build. | |
| ifdef TARGET_BUILD_APPS | |
| APPS_DEFAULT_VERSION_NAME := $(PLATFORM_VERSION)-$(BUILD_NUMBER_FROM_FILE) | |
| else | |
| APPS_DEFAULT_VERSION_NAME := $(PLATFORM_VERSION) | |
| endif | |
| # TODO: Right now we generate the asset resources twice, first as part | |
| # of generating the Java classes, then at the end when packaging the final | |
| # assets. This should be changed to do one of two things: (1) Don't generate | |
| # any resource files the first time, only create classes during that stage; | |
| # or (2) Don't use the -c flag with the second stage, instead taking the | |
| # resource files from the first stage as additional input. My original intent | |
| # was to use approach (2), but this requires a little more work in the tool. | |
| # Maybe we should just use approach (1). | |
| # This rule creates the R.java and Manifest.java files, both of which | |
| # are PRODUCT-neutral. Don't pass PRIVATE_PRODUCT_AAPT_CONFIG to this invocation. | |
| define create-resource-java-files | |
| @mkdir -p $(PRIVATE_SOURCE_INTERMEDIATES_DIR) | |
| @mkdir -p $(dir $(PRIVATE_RESOURCE_PUBLICS_OUTPUT)) | |
| $(hide) $(AAPT) package $(PRIVATE_AAPT_FLAGS) -m \ | |
| $(eval # PRIVATE_PRODUCT_AAPT_CONFIG is intentionally missing-- see comment.) \ | |
| $(addprefix -J , $(PRIVATE_SOURCE_INTERMEDIATES_DIR)) \ | |
| $(addprefix -M , $(PRIVATE_ANDROID_MANIFEST)) \ | |
| $(addprefix -P , $(PRIVATE_RESOURCE_PUBLICS_OUTPUT)) \ | |
| $(addprefix -S , $(PRIVATE_RESOURCE_DIR)) \ | |
| $(addprefix -A , $(PRIVATE_ASSET_DIR)) \ | |
| $(addprefix -I , $(PRIVATE_AAPT_INCLUDES)) \ | |
| $(addprefix -G , $(PRIVATE_PROGUARD_OPTIONS_FILE)) \ | |
| $(addprefix --min-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ | |
| $(addprefix --target-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ | |
| $(if $(filter --version-code,$(PRIVATE_AAPT_FLAGS)),,--version-code $(PLATFORM_SDK_VERSION)) \ | |
| $(if $(filter --version-name,$(PRIVATE_AAPT_FLAGS)),,--version-name $(APPS_DEFAULT_VERSION_NAME)) \ | |
| $(addprefix --rename-manifest-package , $(PRIVATE_MANIFEST_PACKAGE_NAME)) \ | |
| $(addprefix --rename-instrumentation-target-package , $(PRIVATE_MANIFEST_INSTRUMENTATION_FOR)) | |
| endef | |
| xlint_unchecked := -Xlint:unchecked | |
| # emit-line, <word list>, <output file> | |
| define emit-line | |
| $(if $(1),echo -n '$(strip $(1)) ' >> $(2)) | |
| endef | |
| # dump-words-to-file, <word list>, <output file> | |
| define dump-words-to-file | |
| @rm -f $(2) | |
| @$(call emit-line,$(wordlist 1,200,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 201,400,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 401,600,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 601,800,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 801,1000,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 1001,1200,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 1201,1400,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 1401,1600,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 1601,1800,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 1801,2000,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 2001,2200,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 2201,2400,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 2401,2600,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 2601,2800,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 2801,3000,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 3001,3200,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 3201,3400,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 3401,3600,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 3601,3800,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 3801,4000,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 4001,4200,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 4201,4400,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 4401,4600,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 4601,4800,$(1)),$(2)) | |
| @$(call emit-line,$(wordlist 4801,5000,$(1)),$(2)) | |
| @$(if $(wordlist 5001,5002,$(1)),$(error Too many words ($(words $(1))))) | |
| endef | |
| # For a list of jar files, unzip them to a specified directory, | |
| # but make sure that no META-INF files come along for the ride. | |
| # | |
| # $(1): files to unzip | |
| # $(2): destination directory | |
| define unzip-jar-files | |
| $(hide) for f in $(1); \ | |
| do \ | |
| if [ ! -f $$f ]; then \ | |
| echo Missing file $$f; \ | |
| exit 1; \ | |
| fi; \ | |
| unzip -qo $$f -d $(2); \ | |
| done \ | |
| $(if $(PRIVATE_DONT_DELETE_JAR_META_INF),,;rm -rf $(2)/META-INF) | |
| endef | |
| # Common definition to invoke javac on the host and target. | |
| # | |
| # Some historical notes: | |
| # - below we write the list of java files to java-source-list to avoid argument | |
| # list length problems with Cygwin | |
| # - we filter out duplicate java file names because eclipse's compiler | |
| # doesn't like them. | |
| # | |
| # $(1): javac | |
| # $(2): bootclasspath | |
| define compile-java | |
| $(hide) rm -f $@ | |
| $(hide) rm -rf $(PRIVATE_CLASS_INTERMEDIATES_DIR) | |
| $(hide) mkdir -p $(dir $@) | |
| $(hide) mkdir -p $(PRIVATE_CLASS_INTERMEDIATES_DIR) | |
| $(call unzip-jar-files,$(PRIVATE_STATIC_JAVA_LIBRARIES),$(PRIVATE_CLASS_INTERMEDIATES_DIR)) | |
| $(call dump-words-to-file,$(PRIVATE_JAVA_SOURCES),$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list) | |
| $(hide) if [ -d "$(PRIVATE_SOURCE_INTERMEDIATES_DIR)" ]; then \ | |
| find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' -and -not -name '.*' >> $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list; \ | |
| fi | |
| $(hide) tr ' ' '\n' < $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list \ | |
| | sort -u > $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq | |
| $(hide) if [ -s $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq ] ; then \ | |
| $(1) -encoding UTF-8 \ | |
| $(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \ | |
| $(2) \ | |
| $(addprefix -classpath ,$(strip \ | |
| $(call normalize-path-list,$(PRIVATE_ALL_JAVA_LIBRARIES)))) \ | |
| $(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \ | |
| -extdirs "" -d $(PRIVATE_CLASS_INTERMEDIATES_DIR) \ | |
| $(PRIVATE_JAVACFLAGS) \ | |
| \@$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq \ | |
| || ( rm -rf $(PRIVATE_CLASS_INTERMEDIATES_DIR) ; exit 41 ) \ | |
| fi | |
| $(if $(PRIVATE_JAVA_LAYERS_FILE), $(hide) build/tools/java-layers.py \ | |
| $(PRIVATE_JAVA_LAYERS_FILE) \@$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq,) | |
| $(hide) rm -f $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list | |
| $(hide) rm -f $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq | |
| $(if $(PRIVATE_JAR_EXCLUDE_FILES), $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) \ | |
| -name $(word 1, $(PRIVATE_JAR_EXCLUDE_FILES)) \ | |
| $(addprefix -o -name , $(wordlist 2, 999, $(PRIVATE_JAR_EXCLUDE_FILES))) \ | |
| | xargs rm -rf) | |
| $(if $(PRIVATE_JAR_PACKAGES), \ | |
| $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) -mindepth 1 -type f \ | |
| $(foreach pkg, $(PRIVATE_JAR_PACKAGES), \ | |
| -not -path $(PRIVATE_CLASS_INTERMEDIATES_DIR)/$(subst .,/,$(pkg))/\*) -delete ; \ | |
| find $(PRIVATE_CLASS_INTERMEDIATES_DIR) -empty -delete) | |
| $(if $(PRIVATE_JAR_EXCLUDE_PACKAGES), $(hide) rm -rf \ | |
| $(foreach pkg, $(PRIVATE_JAR_EXCLUDE_PACKAGES), \ | |
| $(PRIVATE_CLASS_INTERMEDIATES_DIR)/$(subst .,/,$(pkg)))) | |
| $(if $(PRIVATE_RMTYPEDEFS), $(hide) $(RMTYPEDEFS) -v $(PRIVATE_CLASS_INTERMEDIATES_DIR)) | |
| $(if $(PRIVATE_JAR_MANIFEST), \ | |
| $(hide) sed -e "s/%BUILD_NUMBER%/$(BUILD_NUMBER_FROM_FILE)/" \ | |
| $(PRIVATE_JAR_MANIFEST) > $(dir $@)/manifest.mf && \ | |
| jar -cfm $@ $(dir $@)/manifest.mf \ | |
| -C $(PRIVATE_CLASS_INTERMEDIATES_DIR) ., \ | |
| $(hide) jar -cf $@ -C $(PRIVATE_CLASS_INTERMEDIATES_DIR) .) | |
| $(if $(PRIVATE_EXTRA_JAR_ARGS),$(call add-java-resources-to,$@)) | |
| endef | |
| define transform-java-to-classes.jar | |
| @echo "target Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))" | |
| $(call compile-java,$(TARGET_JAVAC),$(PRIVATE_BOOTCLASSPATH)) | |
| endef | |
| # Invoke Jack to compile java from source to dex and jack files. | |
| # | |
| # Some historical notes: | |
| # - below we write the list of java files to java-source-list to avoid argument | |
| # list length problems with Cygwin | |
| # - we filter out duplicate java file names because Jack doesn't like them. | |
| define jack-java-to-dex | |
| $(hide) rm -f $@ | |
| $(hide) rm -f $(PRIVATE_CLASSES_JACK) | |
| $(hide) rm -rf $(PRIVATE_JACK_INTERMEDIATES_DIR) | |
| $(hide) mkdir -p $(dir $@) | |
| $(hide) mkdir -p $(dir $(PRIVATE_CLASSES_JACK)) | |
| $(hide) mkdir -p $(PRIVATE_JACK_INTERMEDIATES_DIR) | |
| $(if $(PRIVATE_JACK_INCREMENTAL_DIR),$(hide) mkdir -p $(PRIVATE_JACK_INCREMENTAL_DIR)) | |
| $(call dump-words-to-file,$(PRIVATE_JAVA_SOURCES),$(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list) | |
| $(hide) if [ -d "$(PRIVATE_SOURCE_INTERMEDIATES_DIR)" ]; then \ | |
| find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' -and -not -name '.*' >> $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list; \ | |
| fi | |
| $(hide) tr ' ' '\n' < $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list \ | |
| | sort -u > $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq | |
| $(if $(PRIVATE_JACK_PROGUARD_FLAGS), \ | |
| $(hide) echo -basedirectory $(CURDIR) > $@.flags; \ | |
| echo $(PRIVATE_JACK_PROGUARD_FLAGS) >> $@.flags; \ | |
| ) | |
| $(if $(PRIVATE_EXTRA_JAR_ARGS), | |
| $(hide) mkdir -p $@.res.tmp | |
| $(hide) $(call create-empty-package-at,$@.res.tmp.zip) | |
| $(hide) $(call add-java-resources-to,$@.res.tmp.zip) | |
| $(hide) $(call unzip-jar-files,$@.res.tmp.zip,$@.res.tmp) | |
| $(hide) rm $@.res.tmp.zip) | |
| $(hide) if [ -s $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq ] ; then \ | |
| export tmpEcjArg="@$(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq"; \ | |
| else \ | |
| export tmpEcjArg=""; \ | |
| fi; \ | |
| $(call call-jack,$(PRIVATE_JACK_VM_ARGS),$(PRIVATE_JACK_EXTRA_ARGS)) \ | |
| $(strip $(PRIVATE_JACK_FLAGS)) \ | |
| $(if $(NO_OPTIMIZE_DX), \ | |
| -D jack.dex.optimize="false") \ | |
| $(if $(PRIVATE_RMTYPEDEFS), \ | |
| -D jack.android.remove-typedef="true") \ | |
| $(addprefix --classpath ,$(strip \ | |
| $(call normalize-path-list,$(PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES) $(PRIVATE_ALL_JACK_LIBRARIES)))) \ | |
| $(addprefix --import ,$(call reverse-list,$(PRIVATE_STATIC_JACK_LIBRARIES))) \ | |
| $(if $(PRIVATE_EXTRA_JAR_ARGS),--import-resource $@.res.tmp) \ | |
| -D jack.import.resource.policy=keep-first \ | |
| -D jack.import.type.policy=keep-first \ | |
| --output-jack $(PRIVATE_CLASSES_JACK) \ | |
| -D jack.java.source.version=1.7 \ | |
| $(if $(PRIVATE_JACK_INCREMENTAL_DIR),--incremental-folder $(PRIVATE_JACK_INCREMENTAL_DIR)) \ | |
| --output-dex $(PRIVATE_JACK_INTERMEDIATES_DIR) \ | |
| $(addprefix --config-jarjar ,$(strip $(PRIVATE_JARJAR_RULES))) \ | |
| $(if $(PRIVATE_JACK_PROGUARD_FLAGS),--config-proguard $@.flags) \ | |
| $$tmpEcjArg \ | |
| || ( rm -rf $(PRIVATE_CLASSES_JACK); rm -rf $(PRIVATE_JACK_INTERMEDIATES_DIR); exit 41 ) | |
| $(hide) mv $(PRIVATE_JACK_INTERMEDIATES_DIR)/classes*.dex $(dir $@) | |
| $(hide) rm -f $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list | |
| $(if $(PRIVATE_EXTRA_JAR_ARGS),$(hide) rm -rf $@.res.tmp) | |
| $(hide) mv $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq $(PRIVATE_JACK_INTERMEDIATES_DIR).java-source-list | |
| $(if $(PRIVATE_JAR_PACKAGES), $(hide) echo unsupported options PRIVATE_JAR_PACKAGES in $@; exit 53) | |
| $(if $(PRIVATE_JAR_EXCLUDE_PACKAGES), $(hide) echo unsupported options JAR_EXCLUDE_PACKAGES in $@; exit 53) | |
| $(if $(PRIVATE_JAR_MANIFEST), $(hide) echo unsupported options JAR_MANIFEST in $@; exit 53) | |
| endef | |
| define transform-jar-to-jack | |
| $(hide) mkdir -p $(dir $@) | |
| $(JILL) $(PRIVATE_JILL_FLAGS) --output $@.tmpjill.jack $< | |
| $(hide) mkdir -p $@.tmpjill.res | |
| $(hide) $(call unzip-jar-files,$<,$@.tmpjill.res) | |
| $(hide) find $@.tmpjill.res -iname "*.class" -delete | |
| $(hide) $(call call-jack,$(PRIVATE_JACK_VM_ARGS),$(PRIVATE_JACK_EXTRA_ARGS)) \ | |
| -D jack.import.resource.policy=keep-first \ | |
| -D jack.import.type.policy=keep-first \ | |
| --import $@.tmpjill.jack \ | |
| --import-resource $@.tmpjill.res \ | |
| --output-jack $@ | |
| $(hide) rm -rf $@.tmpjill.res | |
| $(hide) rm $@.tmpjill.jack | |
| endef | |
| # Invoke Jack to compile java from source to jack files without shrink or obfuscation. | |
| # | |
| # Some historical notes: | |
| # - below we write the list of java files to java-source-list to avoid argument | |
| # list length problems with Cygwin | |
| # - we filter out duplicate java file names because Jack doesn't like them. | |
| define java-to-jack | |
| $(hide) rm -f $@ | |
| $(hide) rm -rf $(PRIVATE_JACK_INTERMEDIATES_DIR) | |
| $(hide) mkdir -p $(dir $@) | |
| $(hide) mkdir -p $(PRIVATE_JACK_INTERMEDIATES_DIR) | |
| $(if $(PRIVATE_JACK_INCREMENTAL_DIR),$(hide) mkdir -p $(PRIVATE_JACK_INCREMENTAL_DIR)) | |
| $(call dump-words-to-file,$(PRIVATE_JAVA_SOURCES),$(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list) | |
| $(hide) if [ -d "$(PRIVATE_SOURCE_INTERMEDIATES_DIR)" ]; then \ | |
| find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' -and -not -name '.*' >> $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list; \ | |
| fi | |
| $(hide) tr ' ' '\n' < $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list \ | |
| | sort -u > $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq | |
| $(if $(PRIVATE_JACK_PROGUARD_FLAGS), \ | |
| $(hide) echo -basedirectory $(CURDIR) > $@.flags; \ | |
| echo $(PRIVATE_JACK_PROGUARD_FLAGS) >> $@.flags; \ | |
| ) | |
| $(if $(PRIVATE_EXTRA_JAR_ARGS), | |
| $(hide) mkdir -p $@.res.tmp | |
| $(hide) $(call create-empty-package-at,$@.res.tmp.zip) | |
| $(hide) $(call add-java-resources-to,$@.res.tmp.zip) | |
| $(hide) unzip -qo $@.res.tmp.zip -d $@.res.tmp | |
| $(hide) rm $@.res.tmp.zip) | |
| $(hide) if [ -s $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq ] ; then \ | |
| export tmpEcjArg="@$(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq"; \ | |
| else \ | |
| export tmpEcjArg=""; \ | |
| fi; \ | |
| $(call call-jack,$(PRIVATE_JACK_VM_ARGS),$(PRIVATE_JACK_EXTRA_ARGS)) \ | |
| $(strip $(PRIVATE_JACK_FLAGS)) \ | |
| $(if $(NO_OPTIMIZE_DX), \ | |
| -D jack.dex.optimize="false") \ | |
| $(addprefix --classpath ,$(strip \ | |
| $(call normalize-path-list,$(PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES) $(PRIVATE_ALL_JACK_LIBRARIES)))) \ | |
| $(addprefix --import ,$(call reverse-list,$(PRIVATE_STATIC_JACK_LIBRARIES))) \ | |
| $(if $(PRIVATE_EXTRA_JAR_ARGS),--import-resource $@.res.tmp) \ | |
| -D jack.import.resource.policy=keep-first \ | |
| -D jack.import.type.policy=keep-first \ | |
| -D jack.java.source.version=1.7 \ | |
| $(if $(PRIVATE_JACK_INCREMENTAL_DIR),--incremental-folder $(PRIVATE_JACK_INCREMENTAL_DIR)) \ | |
| --output-jack $@ \ | |
| $(addprefix --config-jarjar ,$(strip $(PRIVATE_JARJAR_RULES))) \ | |
| $(if $(PRIVATE_JACK_PROGUARD_FLAGS),--config-proguard $@.flags) \ | |
| $$tmpEcjArg \ | |
| || ( rm -f $@ ; exit 41 ) | |
| $(hide) rm -f $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list | |
| $(if $(PRIVATE_EXTRA_JAR_ARGS),$(hide) rm -rf $@.res.tmp) | |
| $(hide) mv $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq $(PRIVATE_JACK_INTERMEDIATES_DIR).java-source-list | |
| $(if $(PRIVATE_JAR_PACKAGES), $(hide) echo unsupported options PRIVATE_JAR_PACKAGES in $@; exit 53) | |
| $(if $(PRIVATE_JAR_EXCLUDE_PACKAGES), $(hide) echo unsupported options JAR_EXCLUDE_PACKAGES in $@; exit 53) | |
| $(if $(PRIVATE_JAR_MANIFEST), $(hide) echo unsupported options JAR_MANIFEST in $@; exit 53) | |
| endef | |
| define transform-classes.jar-to-emma | |
| $(hide) java -classpath $(EMMA_JAR) emma instr -outmode fullcopy -outfile \ | |
| $(PRIVATE_EMMA_COVERAGE_FILE) -ip $< -d $(PRIVATE_EMMA_INTERMEDIATES_DIR) \ | |
| $(addprefix -ix , $(PRIVATE_EMMA_COVERAGE_FILTER)) | |
| endef | |
| #TODO: use a smaller -Xmx value for most libraries; | |
| # only core.jar and framework.jar need a heap this big. | |
| define transform-classes.jar-to-dex | |
| @echo "target Dex: $(PRIVATE_MODULE)" | |
| @mkdir -p $(dir $@) | |
| $(hide) rm -f $(dir $@)classes*.dex | |
| $(hide) $(DX) \ | |
| -JXms16M -JXmx2048M \ | |
| --dex --output=$(dir $@) \ | |
| $(if $(NO_OPTIMIZE_DX), \ | |
| --no-optimize) \ | |
| $(if $(GENERATE_DEX_DEBUG), \ | |
| --debug --verbose \ | |
| --dump-to=$(@:.dex=.lst) \ | |
| --dump-width=1000) \ | |
| $(PRIVATE_DX_FLAGS) \ | |
| $< | |
| endef | |
| # Create a mostly-empty .jar file that we'll add to later. | |
| # The MacOS jar tool doesn't like creating empty jar files, | |
| # so we need to give it something. | |
| # $(1) package to create | |
| define create-empty-package-at | |
| @mkdir -p $(dir $(1)) | |
| $(hide) touch $(dir $(1))dummy | |
| $(hide) (cd $(dir $(1)) && jar cf $(notdir $(1)) dummy) | |
| $(hide) zip -qd $(1) dummy | |
| $(hide) rm $(dir $(1))dummy | |
| endef | |
| # Create a mostly-empty .jar file that we'll add to later. | |
| # The MacOS jar tool doesn't like creating empty jar files, | |
| # so we need to give it something. | |
| define create-empty-package | |
| @mkdir -p $(dir $(1)) | |
| $(hide) touch $(dir $(1))zipdummy | |
| $(hide) (cd $(dir $(1)) && jar cf $(notdir $(1)) zipdummy) | |
| $(hide) zip -qd $(1) zipdummy | |
| $(hide) rm $(dir $(1))zipdummy | |
| endef | |
| # Create a mostly-empty .jar file that we'll add to later. | |
| # The MacOS jar tool doesn't like creating empty jar files, | |
| # so we need to give it something. | |
| define create-empty-package | |
| $(call create-empty-package-at,$@) | |
| endef | |
| # Copy an arhchive file and delete any class files and empty folders inside. | |
| # $(1): the source archive file. | |
| # $(2): the destination archive file. | |
| define initialize-package-file | |
| @mkdir -p $(dir $(2)) | |
| $(hide) cp -f $(1) $(2) | |
| $(hide) zip -qd $(2) "*.class" \ | |
| $(if $(strip $(PRIVATE_DONT_DELETE_JAR_DIRS)),,"*/") \ | |
| || true # Ignore the error when nothing to delete. | |
| endef | |
| #TODO: we kinda want to build different asset packages for | |
| # different configurations, then combine them later (or something). | |
| # Per-locale, etc. | |
| # A list of dynamic and static parameters; build layers for | |
| # dynamic params that lay over the static ones. | |
| #TODO: update the manifest to point to the package file | |
| #Note that the version numbers are given to aapt as simple default | |
| #values; applications can override these by explicitly stating | |
| #them in their manifest. | |
| define add-assets-to-package | |
| $(hide) $(AAPT) package -u $(PRIVATE_AAPT_FLAGS) \ | |
| $(addprefix -c , $(PRIVATE_PRODUCT_AAPT_CONFIG)) \ | |
| $(addprefix --preferred-density , $(PRIVATE_PRODUCT_AAPT_PREF_CONFIG)) \ | |
| $(addprefix -M , $(PRIVATE_ANDROID_MANIFEST)) \ | |
| $(addprefix -S , $(PRIVATE_RESOURCE_DIR)) \ | |
| $(addprefix -A , $(PRIVATE_ASSET_DIR)) \ | |
| $(addprefix -I , $(PRIVATE_AAPT_INCLUDES)) \ | |
| $(addprefix --min-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ | |
| $(addprefix --target-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ | |
| $(if $(filter --product,$(PRIVATE_AAPT_FLAGS)),,$(addprefix --product , $(TARGET_AAPT_CHARACTERISTICS))) \ | |
| $(if $(filter --version-code,$(PRIVATE_AAPT_FLAGS)),,--version-code $(PLATFORM_SDK_VERSION)) \ | |
| $(if $(filter --version-name,$(PRIVATE_AAPT_FLAGS)),,--version-name $(APPS_DEFAULT_VERSION_NAME)) \ | |
| $(addprefix --rename-manifest-package , $(PRIVATE_MANIFEST_PACKAGE_NAME)) \ | |
| $(addprefix --rename-instrumentation-target-package , $(PRIVATE_MANIFEST_INSTRUMENTATION_FOR)) \ | |
| -F $@ | |
| endef | |
| # We need the extra blank line, so that the command will be on a separate line. | |
| # $(1): the ABI name | |
| # $(2): the list of shared libraies | |
| define _add-jni-shared-libs-to-package-per-abi | |
| $(hide) cp $(2) $(dir $@)lib/$(1) | |
| endef | |
| define add-jni-shared-libs-to-package | |
| $(hide) rm -rf $(dir $@)lib | |
| $(hide) mkdir -p $(addprefix $(dir $@)lib/,$(PRIVATE_JNI_SHARED_LIBRARIES_ABI)) | |
| $(foreach abi,$(PRIVATE_JNI_SHARED_LIBRARIES_ABI),\ | |
| $(call _add-jni-shared-libs-to-package-per-abi,$(abi),\ | |
| $(patsubst $(abi):%,%,$(filter $(abi):%,$(PRIVATE_JNI_SHARED_LIBRARIES))))) | |
| $(hide) (cd $(dir $@) && zip -r \ | |
| $(if $(filter true, $(PRIVATE_PAGE_ALIGN_JNI_SHARED_LIBRARIES)),-0,) $(notdir $@) lib) | |
| $(hide) rm -rf $(dir $@)lib | |
| endef | |
| #TODO: update the manifest to point to the dex file | |
| define add-dex-to-package | |
| $(hide) zip -qj $@ $(dir $(PRIVATE_DEX_FILE))classes*.dex | |
| endef | |
| # Add java resources added by the current module. | |
| # $(1) destination package | |
| # | |
| define add-java-resources-to | |
| $(call dump-words-to-file, $(PRIVATE_EXTRA_JAR_ARGS), $(1).jar-arg-list) | |
| $(hide) jar uf $(1) @$(1).jar-arg-list | |
| @rm -f $(1).jar-arg-list | |
| endef | |
| # Add resources carried by static Jack libraries. | |
| # | |
| define add-carried-jack-resources | |
| $(hide) if [ -d $(PRIVATE_JACK_INTERMEDIATES_DIR) ] ; then \ | |
| jack_res_jar_flags=$$(find $(PRIVATE_JACK_INTERMEDIATES_DIR) -type f \ | |
| | sed -e "s?^$(PRIVATE_JACK_INTERMEDIATES_DIR)/? -C $(PRIVATE_JACK_INTERMEDIATES_DIR) ?"); \ | |
| if [ -n "$$jack_res_jar_flags" ] ; then \ | |
| echo $$jack_res_jar_flags >$(dir $@)jack_res_jar_flags; \ | |
| jar uf $@ $$jack_res_jar_flags; \ | |
| fi; \ | |
| fi | |
| endef | |
| # Sign a package using the specified key/cert. | |
| # | |
| define sign-package | |
| $(hide) mv $@ $@.unsigned | |
| $(hide) java -jar $(SIGNAPK_JAR) \ | |
| $(PRIVATE_CERTIFICATE) $(PRIVATE_PRIVATE_KEY) \ | |
| $(PRIVATE_ADDITIONAL_CERTIFICATES) $@.unsigned $@.signed | |
| $(hide) mv $@.signed $@ | |
| endef | |
| # Align STORED entries of a package on 4-byte boundaries to make them easier to mmap. | |
| # | |
| define align-package | |
| $(hide) mv $@ $@.unaligned | |
| $(hide) $(ZIPALIGN) \ | |
| -f \ | |
| $(if $(filter true, $(PRIVATE_PAGE_ALIGN_JNI_SHARED_LIBRARIES)),-p,) \ | |
| 4 \ | |
| $@.unaligned $@.aligned | |
| $(hide) mv $@.aligned $@ | |
| endef | |
| define uncompress-shared-libs | |
| $(hide) rm -rf $(dir $@)/tmpworkdir | |
| $(hide) mv $@ $@.compressed | |
| $(hide) mkdir $(dir $@)/tmpworkdir | |
| $(hide) unzip $@.compressed 'lib/*.so' -d $(dir $@)/tmpworkdir | |
| $(hide) ( cd $(dir $@)/tmpworkdir && zip -D -r -0 ../$(notdir $@).compressed lib ) | |
| $(hide) mv $@.compressed $@ | |
| $(hide) rm -rf $(dir $@)/tmpworkdir | |
| endef | |
| define install-dex-debug | |
| $(hide) if [ -f "$(PRIVATE_INTERMEDIATES_DIR)/classes.dex" ]; then \ | |
| mkdir -p $(TOP)/dalvik/DEBUG-FILES; \ | |
| $(ACP) $(PRIVATE_INTERMEDIATES_DIR)/classes.dex \ | |
| $(TOP)/dalvik/DEBUG-FILES/$(PRIVATE_MODULE).dex; \ | |
| fi | |
| $(hide) if [ -f "$(PRIVATE_INTERMEDIATES_DIR)/classes.lst" ]; then \ | |
| mkdir -p $(TOP)/dalvik/DEBUG-FILES; \ | |
| $(ACP) $(PRIVATE_INTERMEDIATES_DIR)/classes.lst \ | |
| $(TOP)/dalvik/DEBUG-FILES/$(PRIVATE_MODULE).lst; \ | |
| fi | |
| endef | |
| # TODO(joeo): If we can ever upgrade to post 3.81 make and get the | |
| # new prebuilt rules to work, we should change this to copy the | |
| # resources to the out directory and then copy the resources. | |
| # Note: we intentionally don't clean PRIVATE_CLASS_INTERMEDIATES_DIR | |
| # in transform-java-to-classes for the sake of vm-tests. | |
| define transform-host-java-to-package | |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))" | |
| $(call compile-java,$(HOST_JAVAC),$(PRIVATE_BOOTCLASSPATH)) | |
| endef | |
| ########################################################### | |
| ## Commands for copying files | |
| ########################################################### | |
| # Define a rule to copy a header. Used via $(eval) by copy_headers.make. | |
| # $(1): source header | |
| # $(2): destination header | |
| define copy-one-header | |
| $(2): $(1) | |
| @echo "Header: $$@" | |
| $$(copy-file-to-new-target-with-cp) | |
| endef | |
| # Define a rule to copy a file. For use via $(eval). | |
| # $(1): source file | |
| # $(2): destination file | |
| define copy-one-file | |
| $(2): $(1) | $(ACP) | |
| @echo "Copy: $$@" | |
| $$(copy-file-to-target) | |
| endef | |
| # Copies many files. | |
| # $(1): The files to copy. Each entry is a ':' separated src:dst pair | |
| # Evaluates to the list of the dst files (ie suitable for a dependency list) | |
| define copy-many-files | |
| $(foreach f, $(1), $(strip \ | |
| $(eval _cmf_tuple := $(subst :, ,$(f))) \ | |
| $(eval _cmf_src := $(word 1,$(_cmf_tuple))) \ | |
| $(eval _cmf_dest := $(word 2,$(_cmf_tuple))) \ | |
| $(eval $(call copy-one-file,$(_cmf_src),$(_cmf_dest))) \ | |
| $(_cmf_dest))) | |
| endef | |
| # Copy the file only if it's a well-formed xml file. For use via $(eval). | |
| # $(1): source file | |
| # $(2): destination file, must end with .xml. | |
| define copy-xml-file-checked | |
| $(2): $(1) | $(ACP) | |
| @echo "Copy xml: $$@" | |
| $(hide) xmllint $$< >/dev/null # Don't print the xml file to stdout. | |
| $$(copy-file-to-target) | |
| endef | |
| # The -t option to acp and the -p option to cp is | |
| # required for OSX. OSX has a ridiculous restriction | |
| # where it's an error for a .a file's modification time | |
| # to disagree with an internal timestamp, and this | |
| # macro is used to install .a files (among other things). | |
| # Copy a single file from one place to another, | |
| # preserving permissions and overwriting any existing | |
| # file. | |
| # We disable the "-t" option for acp cannot handle | |
| # high resolution timestamp correctly on file systems like ext4. | |
| # Therefore copy-file-to-target is the same as copy-file-to-new-target. | |
| define copy-file-to-target | |
| @mkdir -p $(dir $@) | |
| $(hide) $(ACP) -fp $< $@ | |
| endef | |
| # The same as copy-file-to-target, but use the local | |
| # cp command instead of acp. | |
| define copy-file-to-target-with-cp | |
| @mkdir -p $(dir $@) | |
| $(hide) cp -fp $< $@ | |
| endef | |
| # The same as copy-file-to-target, but use the zipalign tool to do so. | |
| define copy-file-to-target-with-zipalign | |
| @mkdir -p $(dir $@) | |
| $(hide) $(ZIPALIGN) -f 4 $< $@ | |
| endef | |
| # The same as copy-file-to-target, but strip out "# comment"-style | |
| # comments (for config files and such). | |
| define copy-file-to-target-strip-comments | |
| @mkdir -p $(dir $@) | |
| $(hide) sed -e 's/#.*$$//' -e 's/[ \t]*$$//' -e '/^$$/d' < $< > $@ | |
| endef | |
| # The same as copy-file-to-target, but don't preserve | |
| # the old modification time. | |
| define copy-file-to-new-target | |
| @mkdir -p $(dir $@) | |
| $(hide) $(ACP) -fp $< $@ | |
| endef | |
| # The same as copy-file-to-new-target, but use the local | |
| # cp command instead of acp. | |
| define copy-file-to-new-target-with-cp | |
| @mkdir -p $(dir $@) | |
| $(hide) cp -f $< $@ | |
| endef | |
| # Copy a prebuilt file to a target location. | |
| define transform-prebuilt-to-target | |
| @echo "$(if $(PRIVATE_IS_HOST_MODULE),host,target) Prebuilt: $(PRIVATE_MODULE) ($@)" | |
| $(copy-file-to-target) | |
| endef | |
| # Copy a prebuilt file to a target location, using zipalign on it. | |
| define transform-prebuilt-to-target-with-zipalign | |
| @echo "$(if $(PRIVATE_IS_HOST_MODULE),host,target) Prebuilt APK: $(PRIVATE_MODULE) ($@)" | |
| $(copy-file-to-target-with-zipalign) | |
| endef | |
| # Copy a prebuilt file to a target location, stripping "# comment" comments. | |
| define transform-prebuilt-to-target-strip-comments | |
| @echo "$(if $(PRIVATE_IS_HOST_MODULE),host,target) Prebuilt: $(PRIVATE_MODULE) ($@)" | |
| $(copy-file-to-target-strip-comments) | |
| endef | |
| # Copy a list of files/directories to target location, with sub dir structure preserved. | |
| # For example $(HOST_OUT_EXECUTABLES)/aapt -> $(staging)/bin/aapt . | |
| # $(1): the source list of files/directories. | |
| # $(2): the path prefix to strip. In the above example it would be $(HOST_OUT). | |
| # $(3): the target location. | |
| define copy-files-with-structure | |
| $(foreach t,$(1),\ | |
| $(eval s := $(patsubst $(2)%,%,$(t)))\ | |
| $(hide) mkdir -p $(dir $(3)/$(s)); cp -Rf $(t) $(3)/$(s)$(newline)) | |
| endef | |
| ########################################################### | |
| ## Commands to call Proguard | |
| ########################################################### | |
| define transform-jar-to-proguard | |
| @echo Proguard: $@ | |
| $(hide) $(PROGUARD) -injars $< -outjars $@ $(PRIVATE_PROGUARD_FLAGS) \ | |
| $(addprefix -injars , $(PRIVATE_EXTRA_INPUT_JAR)) | |
| endef | |
| ########################################################### | |
| ## Stuff source generated from one-off tools | |
| ########################################################### | |
| define transform-generated-source | |
| @echo "target Generated: $(PRIVATE_MODULE) <= $<" | |
| @mkdir -p $(dir $@) | |
| $(hide) $(PRIVATE_CUSTOM_TOOL) | |
| endef | |
| ########################################################### | |
| ## Assertions about attributes of the target | |
| ########################################################### | |
| # $(1): The file to check | |
| ifndef get-file-size | |
| $(error HOST_OS must define get-file-size) | |
| endif | |
| # Convert a partition data size (eg, as reported in /proc/mtd) to the | |
| # size of the image used to flash that partition (which includes a | |
| # spare area for each page). | |
| # $(1): the partition data size | |
| define image-size-from-data-size | |
| $(strip $(eval _isfds_value := $$(shell echo $$$$(($(1) / $(BOARD_NAND_PAGE_SIZE) * \ | |
| ($(BOARD_NAND_PAGE_SIZE)+$(BOARD_NAND_SPARE_SIZE))))))\ | |
| $(if $(filter 0, $(_isfds_value)),$(shell echo $$(($(BOARD_NAND_PAGE_SIZE)+$(BOARD_NAND_SPARE_SIZE)))),$(_isfds_value))\ | |
| $(eval _isfds_value :=)) | |
| endef | |
| # $(1): The file(s) to check (often $@) | |
| # $(2): The maximum total image size, in decimal bytes. | |
| # Make sure to take into account any reserved space needed for the FS. | |
| # | |
| # If $(2) is empty, evaluates to "true" | |
| # | |
| # Reserve bad blocks. Make sure that MAX(1% of partition size, 2 blocks) | |
| # is left over after the image has been flashed. Round the 1% up to the | |
| # next whole flash block size. | |
| define assert-max-file-size | |
| $(if $(2), \ | |
| size=$$(for i in $(1); do $(call get-file-size,$$i); echo +; done; echo 0); \ | |
| total=$$(( $$( echo "$$size" ) )); \ | |
| printname=$$(echo -n "$(1)" | tr " " +); \ | |
| img_blocksize=$(call image-size-from-data-size,$(BOARD_FLASH_BLOCK_SIZE)); \ | |
| twoblocks=$$((img_blocksize * 2)); \ | |
| onepct=$$((((($(2) / 100) - 1) / img_blocksize + 1) * img_blocksize)); \ | |
| reserve=$$((twoblocks > onepct ? twoblocks : onepct)); \ | |
| maxsize=$$(($(2) - reserve)); \ | |
| echo "$$printname maxsize=$$maxsize blocksize=$$img_blocksize total=$$total reserve=$$reserve"; \ | |
| if [ "$$total" -gt "$$maxsize" ]; then \ | |
| echo "error: $$printname too large ($$total > [$(2) - $$reserve])"; \ | |
| false; \ | |
| elif [ "$$total" -gt $$((maxsize - 32768)) ]; then \ | |
| echo "WARNING: $$printname approaching size limit ($$total now; limit $$maxsize)"; \ | |
| fi \ | |
| , \ | |
| true \ | |
| ) | |
| endef | |
| # Like assert-max-file-size, but the second argument is a partition | |
| # size, which we'll convert to a max image size before checking it | |
| # against the files. | |
| # | |
| # $(1): The file(s) to check (often $@) | |
| # $(2): The partition size. | |
| define assert-max-image-size | |
| $(if $(2), \ | |
| $(call assert-max-file-size,$(1),$(call image-size-from-data-size,$(2)))) | |
| endef | |
| ########################################################### | |
| ## Define device-specific radio files | |
| ########################################################### | |
| INSTALLED_RADIOIMAGE_TARGET := | |
| # Copy a radio image file to the output location, and add it to | |
| # INSTALLED_RADIOIMAGE_TARGET. | |
| # $(1): filename | |
| define add-radio-file | |
| $(eval $(call add-radio-file-internal,$(1),$(notdir $(1)))) | |
| endef | |
| define add-radio-file-internal | |
| INSTALLED_RADIOIMAGE_TARGET += $$(PRODUCT_OUT)/$(2) | |
| $$(PRODUCT_OUT)/$(2) : $$(LOCAL_PATH)/$(1) | $$(ACP) | |
| $$(transform-prebuilt-to-target) | |
| endef | |
| # Version of add-radio-file that also arranges for the version of the | |
| # file to be checked against the contents of | |
| # $(TARGET_BOARD_INFO_FILE). | |
| # $(1): filename | |
| # $(2): name of version variable in board-info (eg, "version-baseband") | |
| define add-radio-file-checked | |
| $(eval $(call add-radio-file-checked-internal,$(1),$(notdir $(1)),$(2))) | |
| endef | |
| define add-radio-file-checked-internal | |
| INSTALLED_RADIOIMAGE_TARGET += $$(PRODUCT_OUT)/$(2) | |
| BOARD_INFO_CHECK += $(3):$(LOCAL_PATH)/$(1) | |
| $$(PRODUCT_OUT)/$(2) : $$(LOCAL_PATH)/$(1) | $$(ACP) | |
| $$(transform-prebuilt-to-target) | |
| endef | |
| ########################################################### | |
| # Override the package defined in $(1), setting the | |
| # variables listed below differently. | |
| # | |
| # $(1): The makefile to override (relative to the source | |
| # tree root) | |
| # $(2): Old LOCAL_PACKAGE_NAME value. | |
| # $(3): New LOCAL_PACKAGE_NAME value. | |
| # $(4): New LOCAL_MANIFEST_PACKAGE_NAME value. | |
| # $(5): New LOCAL_CERTIFICATE value. | |
| # $(6): New LOCAL_INSTRUMENTATION_FOR value. | |
| # $(7): New LOCAL_MANIFEST_INSTRUMENTATION_FOR value. | |
| # | |
| # Note that LOCAL_PACKAGE_OVERRIDES is NOT cleared in | |
| # clear_vars.mk. | |
| ########################################################### | |
| define inherit-package | |
| $(eval $(call inherit-package-internal,$(1),$(2),$(3),$(4),$(5),$(6),$(7))) | |
| endef | |
| define inherit-package-internal | |
| LOCAL_PACKAGE_OVERRIDES \ | |
| := $(strip $(1))||$(strip $(2))||$(strip $(3))||$(strip $(4))||&&$(strip $(5))||&&$(strip $(6))||&&$(strip $(7)) $(LOCAL_PACKAGE_OVERRIDES) | |
| include $(1) | |
| LOCAL_PACKAGE_OVERRIDES \ | |
| := $(wordlist 1,$(words $(LOCAL_PACKAGE_OVERRIDES)), $(LOCAL_PACKAGE_OVERRIDES)) | |
| endef | |
| # To be used with inherit-package above | |
| # Evalutes to true if the package was overridden | |
| define set-inherited-package-variables | |
| $(strip $(call set-inherited-package-variables-internal)) | |
| endef | |
| define keep-or-override | |
| $(eval $(1) := $(if $(2),$(2),$($(1)))) | |
| endef | |
| define set-inherited-package-variables-internal | |
| $(eval _o := $(subst ||, ,$(lastword $(LOCAL_PACKAGE_OVERRIDES)))) | |
| $(eval _n := $(subst ||, ,$(firstword $(LOCAL_PACKAGE_OVERRIDES)))) | |
| $(if $(filter $(word 2,$(_n)),$(LOCAL_PACKAGE_NAME)), \ | |
| $(eval LOCAL_PACKAGE_NAME := $(word 3,$(_o))) \ | |
| $(eval LOCAL_MANIFEST_PACKAGE_NAME := $(word 4,$(_o))) \ | |
| $(call keep-or-override,LOCAL_CERTIFICATE,$(patsubst &&%,%,$(word 5,$(_o)))) \ | |
| $(call keep-or-override,LOCAL_INSTRUMENTATION_FOR,$(patsubst &&%,%,$(word 6,$(_o)))) \ | |
| $(call keep-or-override,LOCAL_MANIFEST_INSTRUMENTATION_FOR,$(patsubst &&%,%,$(word 7,$(_o)))) \ | |
| $(eval LOCAL_OVERRIDES_PACKAGES := $(sort $(LOCAL_OVERRIDES_PACKAGES) $(word 2,$(_o)))) \ | |
| true \ | |
| ,) | |
| endef | |
| ########################################################### | |
| ## API Check | |
| ########################################################### | |
| # eval this to define a rule that runs apicheck. | |
| # | |
| # Args: | |
| # $(1) target | |
| # $(2) stable api file | |
| # $(3) api file to be tested | |
| # $(4) stable removed api file | |
| # $(5) removed api file to be tested | |
| # $(6) arguments for apicheck | |
| # $(7) command to run if apicheck failed | |
| # $(8) target dependent on this api check | |
| # $(9) additional dependencies | |
| define check-api | |
| $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(strip $(1))-timestamp: $(2) $(3) $(4) $(APICHECK) $(9) | |
| @echo "Checking API:" $(1) | |
| $(hide) ( $(APICHECK_COMMAND) $(6) $(2) $(3) $(4) $(5) || ( $(7) ; exit 38 ) ) | |
| $(hide) mkdir -p $$(dir $$@) | |
| $(hide) touch $$@ | |
| $(8): $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(strip $(1))-timestamp | |
| endef | |
| ## Whether to build from source if prebuilt alternative exists | |
| ########################################################### | |
| # $(1): module name | |
| # $(2): LOCAL_PATH | |
| # Expands to empty string if not from source. | |
| ifeq (true,$(ANDROID_BUILD_FROM_SOURCE)) | |
| define if-build-from-source | |
| true | |
| endef | |
| else | |
| define if-build-from-source | |
| $(if $(filter $(ANDROID_NO_PREBUILT_MODULES),$(1))$(filter \ | |
| $(addsuffix %,$(ANDROID_NO_PREBUILT_PATHS)),$(2)),true) | |
| endef | |
| endif | |
| # Include makefile $(1) if build from source for module $(2) | |
| # $(1): the makefile to include | |
| # $(2): module name | |
| # $(3): LOCAL_PATH | |
| define include-if-build-from-source | |
| $(if $(call if-build-from-source,$(2),$(3)),$(eval include $(1))) | |
| endef | |
| # Return the arch for the source file of a prebuilt | |
| # Return "none" if no matching arch found, so the result can be passed to | |
| # LOCAL_MODULE_TARGET_ARCH. | |
| # $(1) the list of archs supported by the prebuilt | |
| define get-prebuilt-src-arch | |
| $(strip $(if $(filter $(TARGET_ARCH),$(1)),$(TARGET_ARCH),\ | |
| $(if $(filter $(TARGET_2ND_ARCH),$(1)),$(TARGET_2ND_ARCH),none))) | |
| endef | |
| ########################################################### | |
| ## Other includes | |
| ########################################################### | |
| # ----------------------------------------------------------------- | |
| # Rules and functions to help copy important files to DIST_DIR | |
| # when requested. | |
| include $(BUILD_SYSTEM)/distdir.mk | |
| # Include any vendor specific definitions.mk file | |
| -include $(TOPDIR)vendor/*/build/core/definitions.mk | |
| -include $(TOPDIR)device/*/build/core/definitions.mk | |
| # broken: | |
| # $(foreach file,$^,$(if $(findstring,.a,$(suffix $file)),-l$(file),$(file))) | |
| ########################################################### | |
| ## Misc notes | |
| ########################################################### | |
| #DEPDIR = .deps | |
| #df = $(DEPDIR)/$(*F) | |
| #SRCS = foo.c bar.c ... | |
| #%.o : %.c | |
| # @$(MAKEDEPEND); \ | |
| # cp $(df).d $(df).P; \ | |
| # sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \ | |
| # -e '/^$$/ d' -e 's/$$/ :/' < $(df).d >> $(df).P; \ | |
| # rm -f $(df).d | |
| # $(COMPILE.c) -o $@ $< | |
| #-include $(SRCS:%.c=$(DEPDIR)/%.P) | |
| #%.o : %.c | |
| # $(COMPILE.c) -MD -o $@ $< | |
| # @cp $*.d $*.P; \ | |
| # sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \ | |
| # -e '/^$$/ d' -e 's/$$/ :/' < $*.d >> $*.P; \ | |
| # rm -f $*.d |