| # Copyright (C) 2022 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # gettop is duplicated here and in shell_utils.mk, because it's difficult |
| # to find shell_utils.make without it for all the novel ways this file can be |
| # sourced. Other common functions should only be in one place or the other. |
| function _gettop_once |
| { |
| local TOPFILE=build/make/core/envsetup.mk |
| if [ -n "$TOP" -a -f "$TOP/$TOPFILE" ] ; then |
| # The following circumlocution ensures we remove symlinks from TOP. |
| (cd "$TOP"; PWD= /bin/pwd) |
| else |
| if [ -f $TOPFILE ] ; then |
| # The following circumlocution (repeated below as well) ensures |
| # that we record the true directory name and not one that is |
| # faked up with symlink names. |
| PWD= /bin/pwd |
| else |
| local HERE=$PWD |
| local T= |
| while [ \( ! \( -f $TOPFILE \) \) -a \( "$PWD" != "/" \) ]; do |
| \cd .. |
| T=`PWD= /bin/pwd -P` |
| done |
| \cd "$HERE" |
| if [ -f "$T/$TOPFILE" ]; then |
| echo "$T" |
| fi |
| fi |
| fi |
| } |
| T=$(_gettop_once) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Always source build/envsetup.sh from the root of the tree." >&2 |
| return 1 |
| fi |
| IMPORTING_ENVSETUP=true source $T/build/make/shell_utils.sh |
| |
| |
| # Help |
| function hmm() { |
| cat <<EOF |
| |
| Run "m help" for help with the build system itself. |
| |
| Invoke ". build/envsetup.sh" from your shell to add the following functions to your environment: |
| - lunch: lunch <product_name>-<release_type>-<build_variant> |
| Selects <product_name> as the product to build, and <build_variant> as the variant to |
| build, and stores those selections in the environment to be read by subsequent |
| invocations of 'm' etc. |
| - tapas: tapas [<App1> <App2> ...] [arm|x86|arm64|x86_64] [eng|userdebug|user] |
| Sets up the build environment for building unbundled apps (APKs). |
| - banchan: banchan <module1> [<module2> ...] \\ |
| [arm|x86|arm64|riscv64|x86_64|arm64_only|x86_64only] [eng|userdebug|user] |
| Sets up the build environment for building unbundled modules (APEXes). |
| - croot: Changes directory to the top of the tree, or a subdirectory thereof. |
| - m: Makes from the top of the tree. |
| - mm: Builds and installs all of the modules in the current directory, and their |
| dependencies. |
| - mmm: Builds and installs all of the modules in the supplied directories, and their |
| dependencies. |
| To limit the modules being built use the syntax: mmm dir/:target1,target2. |
| - mma: Same as 'mm' |
| - mmma: Same as 'mmm' |
| - provision: Flash device with all required partitions. Options will be passed on to fastboot. |
| - cgrep: Greps on all local C/C++ files. |
| - ggrep: Greps on all local Gradle files. |
| - gogrep: Greps on all local Go files. |
| - jgrep: Greps on all local Java files. |
| - jsongrep: Greps on all local Json files. |
| - ktgrep: Greps on all local Kotlin files. |
| - resgrep: Greps on all local res/*.xml files. |
| - mangrep: Greps on all local AndroidManifest.xml files. |
| - mgrep: Greps on all local Makefiles and *.bp files. |
| - owngrep: Greps on all local OWNERS files. |
| - rsgrep: Greps on all local Rust files. |
| - sepgrep: Greps on all local sepolicy files. |
| - sgrep: Greps on all local source files. |
| - tomlgrep: Greps on all local Toml files. |
| - pygrep: Greps on all local Python files. |
| - godir: Go to the directory containing a file. |
| - allmod: List all modules. |
| - gomod: Go to the directory containing a module. |
| - bmod: Get the Bazel label of a Soong module if it is converted with bp2build. |
| - pathmod: Get the directory containing a module. |
| - outmod: Gets the location of a module's installed outputs with a certain extension. |
| - dirmods: Gets the modules defined in a given directory. |
| - installmod: Adb installs a module's built APK. |
| - refreshmod: Refresh list of modules for allmod/gomod/pathmod/outmod/installmod. |
| - syswrite: Remount partitions (e.g. system.img) as writable, rebooting if necessary. |
| |
| Environment options: |
| - SANITIZE_HOST: Set to 'address' to use ASAN for all host modules. |
| - ANDROID_QUIET_BUILD: set to 'true' to display only the essential messages. |
| |
| Look at the source to view more functions. The complete list is: |
| EOF |
| local T=$(gettop) |
| local A="" |
| local i |
| for i in `cat $T/build/envsetup.sh | sed -n "/^[[:blank:]]*function /s/function \([a-z_]*\).*/\1/p" | sort | uniq`; do |
| A="$A $i" |
| done |
| echo $A |
| } |
| |
| # Get all the build variables needed by this script in a single call to the build system. |
| function build_build_var_cache() |
| { |
| local T=$(gettop) |
| # Grep out the variable names from the script. |
| cached_vars=(`cat $T/build/envsetup.sh | tr '()' ' ' | awk '{for(i=1;i<=NF;i++) if($i~/get_build_var/) print $(i+1)}' | sort -u | tr '\n' ' '`) |
| cached_abs_vars=(`cat $T/build/envsetup.sh | tr '()' ' ' | awk '{for(i=1;i<=NF;i++) if($i~/get_abs_build_var/) print $(i+1)}' | sort -u | tr '\n' ' '`) |
| # Call the build system to dump the "<val>=<value>" pairs as a shell script. |
| build_dicts_script=`\builtin cd $T; build/soong/soong_ui.bash --dumpvars-mode \ |
| --vars="${cached_vars[*]}" \ |
| --abs-vars="${cached_abs_vars[*]}" \ |
| --var-prefix=var_cache_ \ |
| --abs-var-prefix=abs_var_cache_` |
| local ret=$? |
| if [ $ret -ne 0 ] |
| then |
| unset build_dicts_script |
| return $ret |
| fi |
| # Execute the script to store the "<val>=<value>" pairs as shell variables. |
| eval "$build_dicts_script" |
| ret=$? |
| unset build_dicts_script |
| if [ $ret -ne 0 ] |
| then |
| return $ret |
| fi |
| BUILD_VAR_CACHE_READY="true" |
| } |
| |
| # Delete the build var cache, so that we can still call into the build system |
| # to get build variables not listed in this script. |
| function destroy_build_var_cache() |
| { |
| unset BUILD_VAR_CACHE_READY |
| local v |
| for v in $cached_vars; do |
| unset var_cache_$v |
| done |
| unset cached_vars |
| for v in $cached_abs_vars; do |
| unset abs_var_cache_$v |
| done |
| unset cached_abs_vars |
| } |
| |
| # Get the value of a build variable as an absolute path. |
| function get_abs_build_var() |
| { |
| if [ "$BUILD_VAR_CACHE_READY" = "true" ] |
| then |
| eval "echo \"\${abs_var_cache_$1}\"" |
| return |
| fi |
| |
| local T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| (\cd $T; build/soong/soong_ui.bash --dumpvar-mode --abs $1) |
| } |
| |
| # Get the exact value of a build variable. |
| function get_build_var() |
| { |
| if [ "$BUILD_VAR_CACHE_READY" = "true" ] |
| then |
| eval "echo \"\${var_cache_$1}\"" |
| return 0 |
| fi |
| |
| local T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return 1 |
| fi |
| (\cd $T; build/soong/soong_ui.bash --dumpvar-mode $1) |
| } |
| |
| # check to see if the supplied product is one we can build |
| function check_product() |
| { |
| local T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| TARGET_PRODUCT=$1 \ |
| TARGET_RELEASE= \ |
| TARGET_BUILD_VARIANT= \ |
| TARGET_BUILD_TYPE= \ |
| TARGET_BUILD_APPS= \ |
| get_build_var TARGET_DEVICE > /dev/null |
| # hide successful answers, but allow the errors to show |
| } |
| |
| VARIANT_CHOICES=(user userdebug eng) |
| |
| # check to see if the supplied variant is valid |
| function check_variant() |
| { |
| local v |
| for v in ${VARIANT_CHOICES[@]} |
| do |
| if [ "$v" = "$1" ] |
| then |
| return 0 |
| fi |
| done |
| return 1 |
| } |
| |
| |
| # Add directories to PATH that are dependent on the lunch target. |
| # For directories that are not lunch-specific, add them in set_global_paths |
| function set_lunch_paths() |
| { |
| local T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| return |
| fi |
| |
| ################################################################## |
| # # |
| # Read me before you modify this code # |
| # # |
| # This function sets ANDROID_LUNCH_BUILD_PATHS to what it is # |
| # adding to PATH, and the next time it is run, it removes that # |
| # from PATH. This is required so lunch can be run more than # |
| # once and still have working paths. # |
| # # |
| ################################################################## |
| |
| # Note: on windows/cygwin, ANDROID_LUNCH_BUILD_PATHS will contain spaces |
| # due to "C:\Program Files" being in the path. |
| |
| # Handle compat with the old ANDROID_BUILD_PATHS variable. |
| # TODO: Remove this after we think everyone has lunched again. |
| if [ -z "$ANDROID_LUNCH_BUILD_PATHS" -a -n "$ANDROID_BUILD_PATHS" ] ; then |
| ANDROID_LUNCH_BUILD_PATHS="$ANDROID_BUILD_PATHS" |
| ANDROID_BUILD_PATHS= |
| fi |
| if [ -n "$ANDROID_PRE_BUILD_PATHS" ] ; then |
| export PATH=${PATH/$ANDROID_PRE_BUILD_PATHS/} |
| # strip leading ':', if any |
| export PATH=${PATH/:%/} |
| ANDROID_PRE_BUILD_PATHS= |
| fi |
| |
| # Out with the old... |
| if [ -n "$ANDROID_LUNCH_BUILD_PATHS" ] ; then |
| export PATH=${PATH/$ANDROID_LUNCH_BUILD_PATHS/} |
| fi |
| |
| # And in with the new... |
| ANDROID_LUNCH_BUILD_PATHS=$(get_abs_build_var SOONG_HOST_OUT_EXECUTABLES) |
| ANDROID_LUNCH_BUILD_PATHS+=:$(get_abs_build_var HOST_OUT_EXECUTABLES) |
| |
| # Append llvm binutils prebuilts path to ANDROID_LUNCH_BUILD_PATHS. |
| local ANDROID_LLVM_BINUTILS=$(get_abs_build_var ANDROID_CLANG_PREBUILTS)/llvm-binutils-stable |
| ANDROID_LUNCH_BUILD_PATHS+=:$ANDROID_LLVM_BINUTILS |
| |
| # Set up ASAN_SYMBOLIZER_PATH for SANITIZE_HOST=address builds. |
| export ASAN_SYMBOLIZER_PATH=$ANDROID_LLVM_BINUTILS/llvm-symbolizer |
| |
| # Append asuite prebuilts path to ANDROID_LUNCH_BUILD_PATHS. |
| local os_arch=$(get_build_var HOST_PREBUILT_TAG) |
| ANDROID_LUNCH_BUILD_PATHS+=:$T/prebuilts/asuite/acloud/$os_arch |
| ANDROID_LUNCH_BUILD_PATHS+=:$T/prebuilts/asuite/aidegen/$os_arch |
| ANDROID_LUNCH_BUILD_PATHS+=:$T/prebuilts/asuite/atest/$os_arch |
| |
| export ANDROID_JAVA_HOME=$(get_abs_build_var ANDROID_JAVA_HOME) |
| export JAVA_HOME=$ANDROID_JAVA_HOME |
| export ANDROID_JAVA_TOOLCHAIN=$(get_abs_build_var ANDROID_JAVA_TOOLCHAIN) |
| ANDROID_LUNCH_BUILD_PATHS+=:$ANDROID_JAVA_TOOLCHAIN |
| |
| # Fix up PYTHONPATH |
| if [ -n $ANDROID_PYTHONPATH ]; then |
| export PYTHONPATH=${PYTHONPATH//$ANDROID_PYTHONPATH/} |
| fi |
| # //development/python-packages contains both a pseudo-PYTHONPATH which |
| # mimics an already assembled venv, but also contains real Python packages |
| # that are not in that layout until they are installed. We can fake it for |
| # the latter type by adding the package source directories to the PYTHONPATH |
| # directly. For the former group, we only need to add the python-packages |
| # directory itself. |
| # |
| # This could be cleaned up by converting the remaining packages that are in |
| # the first category into a typical python source layout (that is, another |
| # layer of directory nesting) and automatically adding all subdirectories of |
| # python-packages to the PYTHONPATH instead of manually curating this. We |
| # can't convert the packages like adb to the other style because doing so |
| # would prevent exporting type info from those packages. |
| # |
| # http://b/266688086 |
| export ANDROID_PYTHONPATH=$T/development/python-packages/adb:$T/development/python-packages/gdbrunner:$T/development/python-packages: |
| if [ -n $VENDOR_PYTHONPATH ]; then |
| ANDROID_PYTHONPATH=$ANDROID_PYTHONPATH$VENDOR_PYTHONPATH |
| fi |
| export PYTHONPATH=$ANDROID_PYTHONPATH$PYTHONPATH |
| |
| unset ANDROID_PRODUCT_OUT |
| export ANDROID_PRODUCT_OUT=$(get_abs_build_var PRODUCT_OUT) |
| export OUT=$ANDROID_PRODUCT_OUT |
| |
| unset ANDROID_HOST_OUT |
| export ANDROID_HOST_OUT=$(get_abs_build_var HOST_OUT) |
| |
| unset ANDROID_SOONG_HOST_OUT |
| export ANDROID_SOONG_HOST_OUT=$(get_abs_build_var SOONG_HOST_OUT) |
| |
| unset ANDROID_HOST_OUT_TESTCASES |
| export ANDROID_HOST_OUT_TESTCASES=$(get_abs_build_var HOST_OUT_TESTCASES) |
| |
| unset ANDROID_TARGET_OUT_TESTCASES |
| export ANDROID_TARGET_OUT_TESTCASES=$(get_abs_build_var TARGET_OUT_TESTCASES) |
| |
| # Finally, set PATH |
| export PATH=$ANDROID_LUNCH_BUILD_PATHS:$PATH |
| } |
| |
| # Add directories to PATH that are NOT dependent on the lunch target. |
| # For directories that are lunch-specific, add them in set_lunch_paths |
| function set_global_paths() |
| { |
| local T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| return |
| fi |
| |
| ################################################################## |
| # # |
| # Read me before you modify this code # |
| # # |
| # This function sets ANDROID_GLOBAL_BUILD_PATHS to what it is # |
| # adding to PATH, and the next time it is run, it removes that # |
| # from PATH. This is required so envsetup.sh can be sourced # |
| # more than once and still have working paths. # |
| # # |
| ################################################################## |
| |
| # Out with the old... |
| if [ -n "$ANDROID_GLOBAL_BUILD_PATHS" ] ; then |
| export PATH=${PATH/$ANDROID_GLOBAL_BUILD_PATHS/} |
| fi |
| |
| # And in with the new... |
| ANDROID_GLOBAL_BUILD_PATHS=$T/build/soong/bin |
| ANDROID_GLOBAL_BUILD_PATHS+=:$T/build/bazel/bin |
| ANDROID_GLOBAL_BUILD_PATHS+=:$T/development/scripts |
| ANDROID_GLOBAL_BUILD_PATHS+=:$T/prebuilts/devtools/tools |
| |
| # add kernel specific binaries |
| if [ $(uname -s) = Linux ] ; then |
| ANDROID_GLOBAL_BUILD_PATHS+=:$T/prebuilts/misc/linux-x86/dtc |
| ANDROID_GLOBAL_BUILD_PATHS+=:$T/prebuilts/misc/linux-x86/libufdt |
| fi |
| |
| # If prebuilts/android-emulator/<system>/ exists, prepend it to our PATH |
| # to ensure that the corresponding 'emulator' binaries are used. |
| case $(uname -s) in |
| Darwin) |
| ANDROID_EMULATOR_PREBUILTS=$T/prebuilts/android-emulator/darwin-x86_64 |
| ;; |
| Linux) |
| ANDROID_EMULATOR_PREBUILTS=$T/prebuilts/android-emulator/linux-x86_64 |
| ;; |
| *) |
| ANDROID_EMULATOR_PREBUILTS= |
| ;; |
| esac |
| if [ -n "$ANDROID_EMULATOR_PREBUILTS" -a -d "$ANDROID_EMULATOR_PREBUILTS" ]; then |
| ANDROID_GLOBAL_BUILD_PATHS+=:$ANDROID_EMULATOR_PREBUILTS |
| export ANDROID_EMULATOR_PREBUILTS |
| fi |
| |
| # Finally, set PATH |
| export PATH=$ANDROID_GLOBAL_BUILD_PATHS:$PATH |
| } |
| |
| function printconfig() |
| { |
| local T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| get_build_var report_config |
| } |
| |
| function set_stuff_for_environment() |
| { |
| set_lunch_paths |
| set_sequence_number |
| |
| export ANDROID_BUILD_TOP=$(gettop) |
| } |
| |
| function set_sequence_number() |
| { |
| export BUILD_ENV_SEQUENCE_NUMBER=13 |
| } |
| |
| # Takes a command name, and check if it's in ENVSETUP_NO_COMPLETION or not. |
| function should_add_completion() { |
| local cmd="$(basename $1| sed 's/_completion//' |sed 's/\.\(.*\)*sh$//')" |
| case :"$ENVSETUP_NO_COMPLETION": in |
| *:"$cmd":*) |
| return 1 |
| ;; |
| esac |
| return 0 |
| } |
| |
| function addcompletions() |
| { |
| local f= |
| |
| # Keep us from trying to run in something that's neither bash nor zsh. |
| if [ -z "$BASH_VERSION" -a -z "$ZSH_VERSION" ]; then |
| return |
| fi |
| |
| # Keep us from trying to run in bash that's too old. |
| if [ -n "$BASH_VERSION" -a ${BASH_VERSINFO[0]} -lt 3 ]; then |
| return |
| fi |
| |
| local completion_files=( |
| packages/modules/adb/adb.bash |
| system/core/fastboot/fastboot.bash |
| tools/asuite/asuite.sh |
| prebuilts/bazel/common/bazel-complete.bash |
| ) |
| # Completion can be disabled selectively to allow users to use non-standard completion. |
| # e.g. |
| # ENVSETUP_NO_COMPLETION=adb # -> disable adb completion |
| # ENVSETUP_NO_COMPLETION=adb:bit # -> disable adb and bit completion |
| local T=$(gettop) |
| for f in ${completion_files[*]}; do |
| f="$T/$f" |
| if [ ! -f "$f" ]; then |
| echo "Warning: completion file $f not found" |
| elif should_add_completion "$f"; then |
| . $f |
| fi |
| done |
| |
| if should_add_completion bit ; then |
| complete -C "bit --tab" bit |
| fi |
| if [ -z "$ZSH_VERSION" ]; then |
| # Doesn't work in zsh. |
| complete -o nospace -F _croot croot |
| # TODO(b/244559459): Support b autocompletion for zsh |
| complete -F _bazel__complete -o nospace b |
| fi |
| complete -F _lunch lunch |
| |
| complete -F _complete_android_module_names pathmod |
| complete -F _complete_android_module_names gomod |
| complete -F _complete_android_module_names outmod |
| complete -F _complete_android_module_names installmod |
| complete -F _complete_android_module_names bmod |
| complete -F _complete_android_module_names m |
| } |
| |
| function multitree_lunch_help() |
| { |
| echo "usage: lunch PRODUCT-RELEASE-VARIANT" 1>&2 |
| echo " Set up android build environment based on a product short name and variant" 1>&2 |
| echo 1>&2 |
| echo "lunch COMBO_FILE VARIANT" 1>&2 |
| echo " Set up android build environment based on a specific lunch combo file" 1>&2 |
| echo " and variant." 1>&2 |
| echo 1>&2 |
| echo "lunch --print [CONFIG]" 1>&2 |
| echo " Print the contents of a configuration. If CONFIG is supplied, that config" 1>&2 |
| echo " will be flattened and printed. If CONFIG is not supplied, the currently" 1>&2 |
| echo " selected config will be printed. Returns 0 on success or nonzero on error." 1>&2 |
| echo 1>&2 |
| echo "lunch --list" 1>&2 |
| echo " List all possible combo files available in the current tree" 1>&2 |
| echo 1>&2 |
| echo "lunch --help" 1>&2 |
| echo "lunch -h" 1>&2 |
| echo " Prints this message." 1>&2 |
| } |
| |
| function multitree_lunch() |
| { |
| local code |
| local results |
| # Lunch must be run in the topdir, but this way we get a clear error |
| # message, instead of FileNotFound. |
| local T=$(multitree_gettop) |
| if [ -z "$T" ]; then |
| _multitree_lunch_error |
| return 1 |
| fi |
| if $(echo "$1" | grep -q '^-') ; then |
| # Calls starting with a -- argument are passed directly and the function |
| # returns with the lunch.py exit code. |
| "${T}/orchestrator/build/orchestrator/core/lunch.py" "$@" |
| code=$? |
| if [[ $code -eq 2 ]] ; then |
| echo 1>&2 |
| multitree_lunch_help |
| return $code |
| elif [[ $code -ne 0 ]] ; then |
| return $code |
| fi |
| else |
| # All other calls go through the --lunch variant of lunch.py |
| results=($(${T}/orchestrator/build/orchestrator/core/lunch.py --lunch "$@")) |
| code=$? |
| if [[ $code -eq 2 ]] ; then |
| echo 1>&2 |
| multitree_lunch_help |
| return $code |
| elif [[ $code -ne 0 ]] ; then |
| return $code |
| fi |
| |
| export TARGET_BUILD_COMBO=${results[0]} |
| export TARGET_BUILD_VARIANT=${results[1]} |
| fi |
| } |
| |
| function choosetype() |
| { |
| echo "Build type choices are:" |
| echo " 1. release" |
| echo " 2. debug" |
| echo |
| |
| local DEFAULT_NUM DEFAULT_VALUE |
| DEFAULT_NUM=1 |
| DEFAULT_VALUE=release |
| |
| export TARGET_BUILD_TYPE= |
| local ANSWER |
| while [ -z $TARGET_BUILD_TYPE ] |
| do |
| echo -n "Which would you like? ["$DEFAULT_NUM"] " |
| if [ -z "$1" ] ; then |
| read ANSWER |
| else |
| echo $1 |
| ANSWER=$1 |
| fi |
| case $ANSWER in |
| "") |
| export TARGET_BUILD_TYPE=$DEFAULT_VALUE |
| ;; |
| 1) |
| export TARGET_BUILD_TYPE=release |
| ;; |
| release) |
| export TARGET_BUILD_TYPE=release |
| ;; |
| 2) |
| export TARGET_BUILD_TYPE=debug |
| ;; |
| debug) |
| export TARGET_BUILD_TYPE=debug |
| ;; |
| *) |
| echo |
| echo "I didn't understand your response. Please try again." |
| echo |
| ;; |
| esac |
| if [ -n "$1" ] ; then |
| break |
| fi |
| done |
| |
| build_build_var_cache |
| set_stuff_for_environment |
| destroy_build_var_cache |
| } |
| |
| # |
| # This function isn't really right: It chooses a TARGET_PRODUCT |
| # based on the list of boards. Usually, that gets you something |
| # that kinda works with a generic product, but really, you should |
| # pick a product by name. |
| # |
| function chooseproduct() |
| { |
| local default_value |
| if [ "x$TARGET_PRODUCT" != x ] ; then |
| default_value=$TARGET_PRODUCT |
| else |
| default_value=aosp_arm |
| fi |
| |
| export TARGET_BUILD_APPS= |
| export TARGET_PRODUCT= |
| local ANSWER |
| while [ -z "$TARGET_PRODUCT" ] |
| do |
| echo -n "Which product would you like? [$default_value] " |
| if [ -z "$1" ] ; then |
| read ANSWER |
| else |
| echo $1 |
| ANSWER=$1 |
| fi |
| |
| if [ -z "$ANSWER" ] ; then |
| export TARGET_PRODUCT=$default_value |
| else |
| if check_product $ANSWER |
| then |
| export TARGET_PRODUCT=$ANSWER |
| else |
| echo "** Not a valid product: $ANSWER" |
| fi |
| fi |
| if [ -n "$1" ] ; then |
| break |
| fi |
| done |
| |
| build_build_var_cache |
| set_stuff_for_environment |
| destroy_build_var_cache |
| } |
| |
| function choosevariant() |
| { |
| echo "Variant choices are:" |
| local index=1 |
| local v |
| for v in ${VARIANT_CHOICES[@]} |
| do |
| # The product name is the name of the directory containing |
| # the makefile we found, above. |
| echo " $index. $v" |
| index=$(($index+1)) |
| done |
| |
| local default_value=eng |
| local ANSWER |
| |
| export TARGET_BUILD_VARIANT= |
| while [ -z "$TARGET_BUILD_VARIANT" ] |
| do |
| echo -n "Which would you like? [$default_value] " |
| if [ -z "$1" ] ; then |
| read ANSWER |
| else |
| echo $1 |
| ANSWER=$1 |
| fi |
| |
| if [ -z "$ANSWER" ] ; then |
| export TARGET_BUILD_VARIANT=$default_value |
| elif (echo -n $ANSWER | grep -q -e "^[0-9][0-9]*$") ; then |
| if [ "$ANSWER" -le "${#VARIANT_CHOICES[@]}" ] ; then |
| export TARGET_BUILD_VARIANT=${VARIANT_CHOICES[@]:$(($ANSWER-1)):1} |
| fi |
| else |
| if check_variant $ANSWER |
| then |
| export TARGET_BUILD_VARIANT=$ANSWER |
| else |
| echo "** Not a valid variant: $ANSWER" |
| fi |
| fi |
| if [ -n "$1" ] ; then |
| break |
| fi |
| done |
| } |
| |
| function choosecombo() |
| { |
| choosetype $1 |
| |
| echo |
| echo |
| chooseproduct $2 |
| |
| echo |
| echo |
| choosevariant $3 |
| |
| echo |
| build_build_var_cache |
| set_stuff_for_environment |
| printconfig |
| destroy_build_var_cache |
| } |
| |
| function add_lunch_combo() |
| { |
| if [ -n "$ZSH_VERSION" ]; then |
| echo -n "${funcfiletrace[1]}: " |
| else |
| echo -n "${BASH_SOURCE[1]}:${BASH_LINENO[0]}: " |
| fi |
| echo "add_lunch_combo is obsolete. Use COMMON_LUNCH_CHOICES in your AndroidProducts.mk instead." |
| } |
| |
| function print_lunch_menu() |
| { |
| local uname=$(uname) |
| local choices |
| choices=$(TARGET_BUILD_APPS= TARGET_PRODUCT= TARGET_RELEASE= TARGET_BUILD_VARIANT= get_build_var COMMON_LUNCH_CHOICES 2>/dev/null) |
| local ret=$? |
| |
| echo |
| echo "You're building on" $uname |
| echo |
| |
| if [ $ret -ne 0 ] |
| then |
| echo "Warning: Cannot display lunch menu." |
| echo |
| echo "Note: You can invoke lunch with an explicit target:" |
| echo |
| echo " usage: lunch [target]" >&2 |
| echo |
| return |
| fi |
| |
| echo "Lunch menu .. Here are the common combinations:" |
| |
| local i=1 |
| local choice |
| for choice in $(echo $choices) |
| do |
| echo " $i. $choice" |
| i=$(($i+1)) |
| done |
| |
| echo |
| } |
| |
| function lunch() |
| { |
| local answer |
| |
| if [[ $# -gt 1 ]]; then |
| echo "usage: lunch [target]" >&2 |
| return 1 |
| fi |
| |
| local used_lunch_menu=0 |
| |
| if [ "$1" ]; then |
| answer=$1 |
| else |
| print_lunch_menu |
| echo "Which would you like? [aosp_cf_x86_64_phone-trunk_staging-eng]" |
| echo -n "Pick from common choices above (e.g. 13) or specify your own (e.g. aosp_barbet-trunk_staging-eng): " |
| read answer |
| used_lunch_menu=1 |
| fi |
| |
| local selection= |
| |
| if [ -z "$answer" ] |
| then |
| selection=aosp_cf_x86_64_phone-trunk_staging-eng |
| elif (echo -n $answer | grep -q -e "^[0-9][0-9]*$") |
| then |
| local choices=($(TARGET_BUILD_APPS= TARGET_PRODUCT= TARGET_RELEASE= TARGET_BUILD_VARIANT= get_build_var COMMON_LUNCH_CHOICES 2>/dev/null)) |
| if [ $answer -le ${#choices[@]} ] |
| then |
| # array in zsh starts from 1 instead of 0. |
| if [ -n "$ZSH_VERSION" ] |
| then |
| selection=${choices[$(($answer))]} |
| else |
| selection=${choices[$(($answer-1))]} |
| fi |
| fi |
| else |
| selection=$answer |
| fi |
| |
| export TARGET_BUILD_APPS= |
| |
| # This must be <product>-<release>-<variant> |
| local product release variant |
| # Split string on the '-' character. |
| IFS="-" read -r product release variant <<< "$selection" |
| |
| if [[ -z "$product" ]] || [[ -z "$release" ]] || [[ -z "$variant" ]] |
| then |
| echo |
| echo "Invalid lunch combo: $selection" |
| echo "Valid combos must be of the form <product>-<release>-<variant>" |
| return 1 |
| fi |
| |
| TARGET_PRODUCT=$product \ |
| TARGET_BUILD_VARIANT=$variant \ |
| TARGET_RELEASE=$release \ |
| build_build_var_cache |
| if [ $? -ne 0 ] |
| then |
| if [[ "$product" =~ .*_(eng|user|userdebug) ]] |
| then |
| echo "Did you mean -${product/*_/}? (dash instead of underscore)" |
| fi |
| return 1 |
| fi |
| export TARGET_PRODUCT=$(get_build_var TARGET_PRODUCT) |
| export TARGET_BUILD_VARIANT=$(get_build_var TARGET_BUILD_VARIANT) |
| export TARGET_RELEASE=$release |
| # Note this is the string "release", not the value of the variable. |
| export TARGET_BUILD_TYPE=release |
| |
| [[ -n "${ANDROID_QUIET_BUILD:-}" ]] || echo |
| |
| set_stuff_for_environment |
| [[ -n "${ANDROID_QUIET_BUILD:-}" ]] || printconfig |
| |
| if [ "${TARGET_BUILD_VARIANT}" = "userdebug" ] && [[ -z "${ANDROID_QUIET_BUILD}" ]]; then |
| echo |
| echo "Want FASTER LOCAL BUILDS? Use -eng instead of -userdebug (however for" \ |
| "performance benchmarking continue to use userdebug)" |
| fi |
| if [ $used_lunch_menu -eq 1 ]; then |
| echo |
| echo "Hint: next time you can simply run 'lunch $selection'" |
| fi |
| |
| destroy_build_var_cache |
| |
| if [[ -n "${CHECK_MU_CONFIG:-}" ]]; then |
| check_mu_config |
| fi |
| } |
| |
| unset COMMON_LUNCH_CHOICES_CACHE |
| # Tab completion for lunch. |
| function _lunch() |
| { |
| local cur prev opts |
| COMPREPLY=() |
| cur="${COMP_WORDS[COMP_CWORD]}" |
| prev="${COMP_WORDS[COMP_CWORD-1]}" |
| |
| if [ -z "$COMMON_LUNCH_CHOICES_CACHE" ]; then |
| COMMON_LUNCH_CHOICES_CACHE=$(TARGET_BUILD_APPS= get_build_var COMMON_LUNCH_CHOICES) |
| fi |
| |
| COMPREPLY=( $(compgen -W "${COMMON_LUNCH_CHOICES_CACHE}" -- ${cur}) ) |
| return 0 |
| } |
| |
| # Configures the build to build unbundled apps. |
| # Run tapas with one or more app names (from LOCAL_PACKAGE_NAME) |
| function tapas() |
| { |
| local showHelp="$(echo $* | xargs -n 1 echo | \grep -E '^(help)$' | xargs)" |
| local arch="$(echo $* | xargs -n 1 echo | \grep -E '^(arm|x86|arm64|x86_64)$' | xargs)" |
| # TODO(b/307975293): Expand tapas to take release arguments (and update hmm() usage). |
| local release="trunk_staging" |
| local variant="$(echo $* | xargs -n 1 echo | \grep -E '^(user|userdebug|eng)$' | xargs)" |
| local density="$(echo $* | xargs -n 1 echo | \grep -E '^(ldpi|mdpi|tvdpi|hdpi|xhdpi|xxhdpi|xxxhdpi|alldpi)$' | xargs)" |
| local keys="$(echo $* | xargs -n 1 echo | \grep -E '^(devkeys)$' | xargs)" |
| local apps="$(echo $* | xargs -n 1 echo | \grep -E -v '^(user|userdebug|eng|arm|x86|arm64|x86_64|ldpi|mdpi|tvdpi|hdpi|xhdpi|xxhdpi|xxxhdpi|alldpi|devkeys)$' | xargs)" |
| |
| |
| if [ "$showHelp" != "" ]; then |
| $(gettop)/build/make/tapasHelp.sh |
| return |
| fi |
| |
| if [ $(echo $arch | wc -w) -gt 1 ]; then |
| echo "tapas: Error: Multiple build archs supplied: $arch" |
| return |
| fi |
| if [ $(echo $release | wc -w) -gt 1 ]; then |
| echo "tapas: Error: Multiple build releases supplied: $release" |
| return |
| fi |
| if [ $(echo $variant | wc -w) -gt 1 ]; then |
| echo "tapas: Error: Multiple build variants supplied: $variant" |
| return |
| fi |
| if [ $(echo $density | wc -w) -gt 1 ]; then |
| echo "tapas: Error: Multiple densities supplied: $density" |
| return |
| fi |
| if [ $(echo $keys | wc -w) -gt 1 ]; then |
| echo "tapas: Error: Multiple keys supplied: $keys" |
| return |
| fi |
| |
| local product=aosp_arm |
| case $arch in |
| x86) product=aosp_x86;; |
| arm64) product=aosp_arm64;; |
| x86_64) product=aosp_x86_64;; |
| esac |
| if [ -n "$keys" ]; then |
| product=${product/aosp_/aosp_${keys}_} |
| fi; |
| |
| if [ -z "$variant" ]; then |
| variant=eng |
| fi |
| if [ -z "$apps" ]; then |
| apps=all |
| fi |
| if [ -z "$density" ]; then |
| density=alldpi |
| fi |
| |
| export TARGET_PRODUCT=$product |
| export TARGET_RELEASE=$release |
| export TARGET_BUILD_VARIANT=$variant |
| export TARGET_BUILD_DENSITY=$density |
| export TARGET_BUILD_TYPE=release |
| export TARGET_BUILD_APPS=$apps |
| |
| build_build_var_cache |
| set_stuff_for_environment |
| printconfig |
| destroy_build_var_cache |
| } |
| |
| # Configures the build to build unbundled Android modules (APEXes). |
| # Run banchan with one or more module names (from apex{} modules). |
| function banchan() |
| { |
| local showHelp="$(echo $* | xargs -n 1 echo | \grep -E '^(help)$' | xargs)" |
| local product="$(echo $* | xargs -n 1 echo | \grep -E '^(.*_)?(arm|x86|arm64|riscv64|x86_64|arm64only|x86_64only)$' | xargs)" |
| # TODO: Expand banchan to take release arguments (and update hmm() usage). |
| local release="trunk_staging" |
| local variant="$(echo $* | xargs -n 1 echo | \grep -E '^(user|userdebug|eng)$' | xargs)" |
| local apps="$(echo $* | xargs -n 1 echo | \grep -E -v '^(user|userdebug|eng|(.*_)?(arm|x86|arm64|riscv64|x86_64))$' | xargs)" |
| |
| if [ "$showHelp" != "" ]; then |
| $(gettop)/build/make/banchanHelp.sh |
| return |
| fi |
| |
| if [ -z "$product" ]; then |
| product=arm64 |
| elif [ $(echo $product | wc -w) -gt 1 ]; then |
| echo "banchan: Error: Multiple build archs or products supplied: $products" |
| return |
| fi |
| if [ $(echo $release | wc -w) -gt 1 ]; then |
| echo "banchan: Error: Multiple build releases supplied: $release" |
| return |
| fi |
| if [ $(echo $variant | wc -w) -gt 1 ]; then |
| echo "banchan: Error: Multiple build variants supplied: $variant" |
| return |
| fi |
| if [ -z "$apps" ]; then |
| echo "banchan: Error: No modules supplied" |
| return |
| fi |
| |
| case $product in |
| arm) product=module_arm;; |
| x86) product=module_x86;; |
| arm64) product=module_arm64;; |
| riscv64) product=module_riscv64;; |
| x86_64) product=module_x86_64;; |
| arm64only) product=module_arm64only;; |
| x86_64only) product=module_x86_64only;; |
| esac |
| if [ -z "$variant" ]; then |
| variant=eng |
| fi |
| |
| export TARGET_PRODUCT=$product |
| export TARGET_RELEASE=$release |
| export TARGET_BUILD_VARIANT=$variant |
| export TARGET_BUILD_DENSITY=alldpi |
| export TARGET_BUILD_TYPE=release |
| |
| # This setup currently uses TARGET_BUILD_APPS just like tapas, but the use |
| # case is different and it may diverge in the future. |
| export TARGET_BUILD_APPS=$apps |
| |
| build_build_var_cache |
| set_stuff_for_environment |
| printconfig |
| destroy_build_var_cache |
| } |
| |
| # TODO: Merge into gettop as part of launching multitree |
| function multitree_gettop |
| { |
| local TOPFILE=orchestrator/build/make/core/envsetup.mk |
| if [ -n "$TOP" -a -f "$TOP/$TOPFILE" ] ; then |
| # The following circumlocution ensures we remove symlinks from TOP. |
| (cd "$TOP"; PWD= /bin/pwd) |
| else |
| if [ -f $TOPFILE ] ; then |
| # The following circumlocution (repeated below as well) ensures |
| # that we record the true directory name and not one that is |
| # faked up with symlink names. |
| PWD= /bin/pwd |
| else |
| local HERE=$PWD |
| local T= |
| while [ \( ! \( -f $TOPFILE \) \) -a \( "$PWD" != "/" \) ]; do |
| \cd .. |
| T=`PWD= /bin/pwd -P` |
| done |
| \cd "$HERE" |
| if [ -f "$T/$TOPFILE" ]; then |
| echo "$T" |
| fi |
| fi |
| fi |
| } |
| |
| function croot() |
| { |
| local T=$(gettop) |
| if [ "$T" ]; then |
| if [ "$1" ]; then |
| \cd $(gettop)/$1 |
| else |
| \cd $(gettop) |
| fi |
| else |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| fi |
| } |
| |
| function _croot() |
| { |
| local T=$(gettop) |
| if [ "$T" ]; then |
| local cur="${COMP_WORDS[COMP_CWORD]}" |
| k=0 |
| for c in $(compgen -d ${T}/${cur}); do |
| COMPREPLY[k++]=${c#${T}/}/ |
| done |
| fi |
| } |
| |
| function cproj() |
| { |
| local TOPFILE=build/make/core/envsetup.mk |
| local HERE=$PWD |
| local T= |
| while [ \( ! \( -f $TOPFILE \) \) -a \( $PWD != "/" \) ]; do |
| T=$PWD |
| if [ -f "$T/Android.mk" ]; then |
| \cd $T |
| return |
| fi |
| \cd .. |
| done |
| \cd $HERE |
| echo "can't find Android.mk" |
| } |
| |
| # Ensure that we're always using the adb in the tree. This works around the fact |
| # that bash caches $PATH lookups, so if you use adb before lunching/building the |
| # one in your tree, you'll continue to get /usr/bin/adb or whatever even after |
| # you have the one from your current tree on your path. Historically this would |
| # cause confusion because glinux had adb in /usr/bin/ by default, though that |
| # doesn't appear to be the case on my rodete hosts; it is however still the case |
| # that my Mac has /usr/local/bin/adb installed by default and on the default |
| # path. |
| function adb() { |
| # We need `command which` because zsh has a built-in `which` that's more |
| # like `type`. |
| local ADB=$(command which adb) |
| if [ -z "$ADB" ]; then |
| echo "Command adb not found; try lunch (and building) first?" |
| return 1 |
| fi |
| $ADB "${@}" |
| } |
| |
| # simplified version of ps; output in the form |
| # <pid> <procname> |
| function qpid() { |
| local prepend='' |
| local append='' |
| if [ "$1" = "--exact" ]; then |
| prepend=' ' |
| append='$' |
| shift |
| elif [ "$1" = "--help" -o "$1" = "-h" ]; then |
| echo "usage: qpid [[--exact] <process name|pid>" |
| return 255 |
| fi |
| |
| local EXE="$1" |
| if [ "$EXE" ] ; then |
| qpid | \grep "$prepend$EXE$append" |
| else |
| adb shell ps \ |
| | tr -d '\r' \ |
| | sed -e 1d -e 's/^[^ ]* *\([0-9]*\).* \([^ ]*\)$/\1 \2/' |
| fi |
| } |
| |
| # syswrite - disable verity, reboot if needed, and remount image |
| # |
| # Easy way to make system.img/etc writable |
| function syswrite() { |
| adb wait-for-device && adb root && adb wait-for-device || return 1 |
| if [[ $(adb disable-verity | grep -i "reboot") ]]; then |
| echo "rebooting" |
| adb reboot && adb wait-for-device && adb root && adb wait-for-device || return 1 |
| fi |
| adb remount || return 1 |
| } |
| |
| # coredump_setup - enable core dumps globally for any process |
| # that has the core-file-size limit set correctly |
| # |
| # NOTE: You must call also coredump_enable for a specific process |
| # if its core-file-size limit is not set already. |
| # NOTE: Core dumps are written to ramdisk; they will not survive a reboot! |
| |
| function coredump_setup() |
| { |
| echo "Getting root..."; |
| adb root; |
| adb wait-for-device; |
| |
| echo "Remounting root partition read-write..."; |
| adb shell mount -w -o remount -t rootfs rootfs; |
| sleep 1; |
| adb wait-for-device; |
| adb shell mkdir -p /cores; |
| adb shell mount -t tmpfs tmpfs /cores; |
| adb shell chmod 0777 /cores; |
| |
| echo "Granting SELinux permission to dump in /cores..."; |
| adb shell restorecon -R /cores; |
| |
| echo "Set core pattern."; |
| adb shell 'echo /cores/core.%p > /proc/sys/kernel/core_pattern'; |
| |
| echo "Done." |
| } |
| |
| # coredump_enable - enable core dumps for the specified process |
| # $1 = PID of process (e.g., $(pid mediaserver)) |
| # |
| # NOTE: coredump_setup must have been called as well for a core |
| # dump to actually be generated. |
| |
| function coredump_enable() |
| { |
| local PID=$1; |
| if [ -z "$PID" ]; then |
| printf "Expecting a PID!\n"; |
| return; |
| fi; |
| echo "Setting core limit for $PID to infinite..."; |
| adb shell /system/bin/ulimit -P $PID -c unlimited |
| } |
| |
| # core - send SIGV and pull the core for process |
| # $1 = PID of process (e.g., $(pid mediaserver)) |
| # |
| # NOTE: coredump_setup must be called once per boot for core dumps to be |
| # enabled globally. |
| |
| function core() |
| { |
| local PID=$1; |
| |
| if [ -z "$PID" ]; then |
| printf "Expecting a PID!\n"; |
| return; |
| fi; |
| |
| local CORENAME=core.$PID; |
| local COREPATH=/cores/$CORENAME; |
| local SIG=SEGV; |
| |
| coredump_enable $1; |
| |
| local done=0; |
| while [ $(adb shell "[ -d /proc/$PID ] && echo -n yes") ]; do |
| printf "\tSending SIG%s to %d...\n" $SIG $PID; |
| adb shell kill -$SIG $PID; |
| sleep 1; |
| done; |
| |
| adb shell "while [ ! -f $COREPATH ] ; do echo waiting for $COREPATH to be generated; sleep 1; done" |
| echo "Done: core is under $COREPATH on device."; |
| } |
| |
| # systemstack - dump the current stack trace of all threads in the system process |
| # to the usual ANR traces file |
| function systemstack() |
| { |
| stacks system_server |
| } |
| |
| # Read the ELF header from /proc/$PID/exe to determine if the process is |
| # 64-bit. |
| function is64bit() |
| { |
| local PID="$1" |
| if [ "$PID" ] ; then |
| if [[ "$(adb shell cat /proc/$PID/exe | xxd -l 1 -s 4 -p)" -eq "02" ]] ; then |
| echo "64" |
| else |
| echo "" |
| fi |
| else |
| echo "" |
| fi |
| } |
| |
| case `uname -s` in |
| Darwin) |
| function sgrep() |
| { |
| find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cc|cpp|hpp|S|java|kt|xml|sh|mk|aidl|vts|proto|rs|go)' \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| ;; |
| *) |
| function sgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.\(c\|h\|cc\|cpp\|hpp\|S\|java\|kt\|xml\|sh\|mk\|aidl\|vts\|proto\|rs\|go\)' \ |
| -exec grep --color -n "$@" {} + |
| } |
| ;; |
| esac |
| |
| function gettargetarch |
| { |
| get_build_var TARGET_ARCH |
| } |
| |
| function ggrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.gradle" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function gogrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.go" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function jgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.java" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function rsgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.rs" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function jsongrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.json" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function tomlgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.toml" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function ktgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.kt" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function cgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f \( -name '*.c' -o -name '*.cc' -o -name '*.cpp' -o -name '*.h' -o -name '*.hpp' \) \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function resgrep() |
| { |
| local dir |
| for dir in `find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -name res -type d`; do |
| find $dir -type f -name '*\.xml' -exec grep --color -n "$@" {} + |
| done |
| } |
| |
| function mangrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -name 'AndroidManifest.xml' \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function owngrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -name 'OWNERS' \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function sepgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -name sepolicy -type d \ |
| -exec grep --color -n -r --exclude-dir=\.git "$@" {} + |
| } |
| |
| function rcgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.rc*" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function pygrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.py" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| case `uname -s` in |
| Darwin) |
| function mgrep() |
| { |
| find -E . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o \( -iregex '.*/(Makefile|Makefile\..*|.*\.make|.*\.mak|.*\.mk|.*\.bp)' -o -regex '(.*/)?(build|soong)/.*[^/]*\.go' \) -type f \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function treegrep() |
| { |
| find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cpp|hpp|S|java|kt|xml)' \ |
| -exec grep --color -n -i "$@" {} + |
| } |
| |
| ;; |
| *) |
| function mgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o \( -regextype posix-egrep -iregex '(.*\/Makefile|.*\/Makefile\..*|.*\.make|.*\.mak|.*\.mk|.*\.bp)' -o -regextype posix-extended -regex '(.*/)?(build|soong)/.*[^/]*\.go' \) -type f \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function treegrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -regextype posix-egrep -iregex '.*\.(c|h|cpp|hpp|S|java|kt|xml)' -type f \ |
| -exec grep --color -n -i "$@" {} + |
| } |
| |
| ;; |
| esac |
| |
| function getprebuilt |
| { |
| get_abs_build_var ANDROID_PREBUILTS |
| } |
| |
| # communicate with a running device or emulator, set up necessary state, |
| # and run the hat command. |
| function runhat() |
| { |
| # process standard adb options |
| local adbTarget="" |
| if [ "$1" = "-d" -o "$1" = "-e" ]; then |
| adbTarget=$1 |
| shift 1 |
| elif [ "$1" = "-s" ]; then |
| adbTarget="$1 $2" |
| shift 2 |
| fi |
| local adbOptions=${adbTarget} |
| #echo adbOptions = ${adbOptions} |
| |
| # runhat options |
| local targetPid=$1 |
| |
| if [ "$targetPid" = "" ]; then |
| echo "Usage: runhat [ -d | -e | -s serial ] target-pid" |
| return |
| fi |
| |
| # confirm hat is available |
| if [ -z $(which hat) ]; then |
| echo "hat is not available in this configuration." |
| return |
| fi |
| |
| # issue "am" command to cause the hprof dump |
| local devFile=/data/local/tmp/hprof-$targetPid |
| echo "Poking $targetPid and waiting for data..." |
| echo "Storing data at $devFile" |
| adb ${adbOptions} shell am dumpheap $targetPid $devFile |
| echo "Press enter when logcat shows \"hprof: heap dump completed\"" |
| echo -n "> " |
| read |
| |
| local localFile=/tmp/$$-hprof |
| |
| echo "Retrieving file $devFile..." |
| adb ${adbOptions} pull $devFile $localFile |
| |
| adb ${adbOptions} shell rm $devFile |
| |
| echo "Running hat on $localFile" |
| echo "View the output by pointing your browser at http://localhost:7000/" |
| echo "" |
| hat -JXmx512m $localFile |
| } |
| |
| function getbugreports() |
| { |
| local reports=(`adb shell ls /sdcard/bugreports | tr -d '\r'`) |
| |
| if [ ! "$reports" ]; then |
| echo "Could not locate any bugreports." |
| return |
| fi |
| |
| local report |
| for report in ${reports[@]} |
| do |
| echo "/sdcard/bugreports/${report}" |
| adb pull /sdcard/bugreports/${report} ${report} |
| gunzip ${report} |
| done |
| } |
| |
| function getsdcardpath() |
| { |
| adb ${adbOptions} shell echo -n \$\{EXTERNAL_STORAGE\} |
| } |
| |
| function getscreenshotpath() |
| { |
| echo "$(getsdcardpath)/Pictures/Screenshots" |
| } |
| |
| function getlastscreenshot() |
| { |
| local screenshot_path=$(getscreenshotpath) |
| local screenshot=`adb ${adbOptions} ls ${screenshot_path} | grep Screenshot_[0-9-]*.*\.png | sort -rk 3 | cut -d " " -f 4 | head -n 1` |
| if [ "$screenshot" = "" ]; then |
| echo "No screenshots found." |
| return |
| fi |
| echo "${screenshot}" |
| adb ${adbOptions} pull ${screenshot_path}/${screenshot} |
| } |
| |
| function startviewserver() |
| { |
| local port=4939 |
| if [ $# -gt 0 ]; then |
| port=$1 |
| fi |
| adb shell service call window 1 i32 $port |
| } |
| |
| function stopviewserver() |
| { |
| adb shell service call window 2 |
| } |
| |
| function isviewserverstarted() |
| { |
| adb shell service call window 3 |
| } |
| |
| function key_home() |
| { |
| adb shell input keyevent 3 |
| } |
| |
| function key_back() |
| { |
| adb shell input keyevent 4 |
| } |
| |
| function key_menu() |
| { |
| adb shell input keyevent 82 |
| } |
| |
| function smoketest() |
| { |
| if [ ! "$ANDROID_PRODUCT_OUT" ]; then |
| echo "Couldn't locate output files. Try running 'lunch' first." >&2 |
| return |
| fi |
| local T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| |
| (\cd "$T" && mmm tests/SmokeTest) && |
| adb uninstall com.android.smoketest > /dev/null && |
| adb uninstall com.android.smoketest.tests > /dev/null && |
| adb install $ANDROID_PRODUCT_OUT/data/app/SmokeTestApp.apk && |
| adb install $ANDROID_PRODUCT_OUT/data/app/SmokeTest.apk && |
| adb shell am instrument -w com.android.smoketest.tests/android.test.InstrumentationTestRunner |
| } |
| |
| # simple shortcut to the runtest command |
| function runtest() |
| { |
| local T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| ("$T"/development/testrunner/runtest.py $@) |
| } |
| |
| function godir () { |
| if [[ -z "$1" ]]; then |
| echo "Usage: godir <regex>" |
| return |
| fi |
| local T=$(gettop) |
| local FILELIST |
| if [ ! "$OUT_DIR" = "" ]; then |
| mkdir -p $OUT_DIR |
| FILELIST=$OUT_DIR/filelist |
| else |
| FILELIST=$T/filelist |
| fi |
| if [[ ! -f $FILELIST ]]; then |
| echo -n "Creating index..." |
| (\cd $T; find . -wholename ./out -prune -o -wholename ./.repo -prune -o -type f > $FILELIST) |
| echo " Done" |
| echo "" |
| fi |
| local lines |
| lines=($(\grep "$1" $FILELIST | sed -e 's/\/[^/]*$//' | sort | uniq)) |
| if [[ ${#lines[@]} = 0 ]]; then |
| echo "Not found" |
| return |
| fi |
| local pathname |
| local choice |
| if [[ ${#lines[@]} > 1 ]]; then |
| while [[ -z "$pathname" ]]; do |
| local index=1 |
| local line |
| for line in ${lines[@]}; do |
| printf "%6s %s\n" "[$index]" $line |
| index=$(($index + 1)) |
| done |
| echo |
| echo -n "Select one: " |
| unset choice |
| read choice |
| if [[ $choice -gt ${#lines[@]} || $choice -lt 1 ]]; then |
| echo "Invalid choice" |
| continue |
| fi |
| pathname=${lines[@]:$(($choice-1)):1} |
| done |
| else |
| pathname=${lines[@]:0:1} |
| fi |
| \cd $T/$pathname |
| } |
| |
| # Update module-info.json in out. |
| function refreshmod() { |
| if [ ! "$ANDROID_PRODUCT_OUT" ]; then |
| echo "No ANDROID_PRODUCT_OUT. Try running 'lunch' first." >&2 |
| return 1 |
| fi |
| |
| echo "Refreshing modules (building module-info.json). Log at $ANDROID_PRODUCT_OUT/module-info.json.build.log." >&2 |
| |
| # for the output of the next command |
| mkdir -p $ANDROID_PRODUCT_OUT || return 1 |
| |
| # Note, can't use absolute path because of the way make works. |
| m $(get_build_var PRODUCT_OUT)/module-info.json \ |
| > $ANDROID_PRODUCT_OUT/module-info.json.build.log 2>&1 |
| } |
| |
| # Verifies that module-info.txt exists, returning nonzero if it doesn't. |
| function verifymodinfo() { |
| if [ ! "$ANDROID_PRODUCT_OUT" ]; then |
| if [ "$QUIET_VERIFYMODINFO" != "true" ] ; then |
| echo "No ANDROID_PRODUCT_OUT. Try running 'lunch' first." >&2 |
| fi |
| return 1 |
| fi |
| |
| if [ ! -f "$ANDROID_PRODUCT_OUT/module-info.json" ]; then |
| if [ "$QUIET_VERIFYMODINFO" != "true" ] ; then |
| echo "Could not find module-info.json. Please run 'refreshmod' first." >&2 |
| fi |
| return 1 |
| fi |
| } |
| |
| # List all modules for the current device, as cached in all_modules.txt. If any build change is |
| # made and it should be reflected in the output, you should run `m nothing` first. |
| function allmod() { |
| cat $ANDROID_PRODUCT_OUT/all_modules.txt 2>/dev/null |
| } |
| |
| # Return the Bazel label of a Soong module if it is converted with bp2build. |
| function bmod() |
| ( |
| if [ $# -eq 0 ]; then |
| echo "usage: bmod <module 1> <module 2> ... <module n>" >&2 |
| return 1 |
| fi |
| |
| # We could run bp2build here, but it might trigger bp2build invalidation |
| # when used with `b` (e.g. --run_soong_tests) and/or add unnecessary waiting |
| # time overhead. |
| # |
| # For a snappy result, use the latest generated version in soong_injection, |
| # and ask users to run m bp2build if it doesn't exist. |
| converted_json="$(get_abs_build_var OUT_DIR)/soong/soong_injection/metrics/converted_modules_path_map.json" |
| |
| if [ ! -f ${converted_json} ]; then |
| echo "bp2build files not found. Have you ran 'm bp2build'?" >&2 |
| return 1 |
| fi |
| |
| modules=() |
| for m in "$@"; do |
| modules+=("\"$m\",") |
| done |
| local res=$(python3 -c "import json |
| modules = [${modules[*]}] |
| converted_json='$converted_json' |
| bp2build_converted_map = json.load(open(converted_json)) |
| for module in modules: |
| if module not in bp2build_converted_map: |
| print(module + ' is not converted to Bazel.') |
| else: |
| print(bp2build_converted_map[module] + ':' + module)") |
| |
| echo "${res}" |
| unconverted_count=$(echo "${res}" | grep -c "not converted to Bazel") |
| if [[ ${unconverted_count} -ne 0 ]]; then |
| return 1 |
| fi |
| ) |
| |
| # Get the path of a specific module in the android tree, as cached in module-info.json. |
| # If any build change is made, and it should be reflected in the output, you should run |
| # 'refreshmod' first. Note: This is the inverse of dirmods. |
| function pathmod() { |
| if [[ $# -ne 1 ]]; then |
| echo "usage: pathmod <module>" >&2 |
| return 1 |
| fi |
| |
| verifymodinfo || return 1 |
| |
| local relpath=$(python3 -c "import json, os |
| module = '$1' |
| module_info = json.load(open('$ANDROID_PRODUCT_OUT/module-info.json')) |
| if module not in module_info: |
| exit(1) |
| print(module_info[module]['path'][0])" 2>/dev/null) |
| |
| if [ -z "$relpath" ]; then |
| echo "Could not find module '$1' (try 'refreshmod' if there have been build changes?)." >&2 |
| return 1 |
| else |
| echo "$ANDROID_BUILD_TOP/$relpath" |
| fi |
| } |
| |
| # Get the path of a specific module in the android tree, as cached in module-info.json. |
| # If any build change is made, and it should be reflected in the output, you should run |
| # 'refreshmod' first. Note: This is the inverse of pathmod. |
| function dirmods() { |
| if [[ $# -ne 1 ]]; then |
| echo "usage: dirmods <path>" >&2 |
| return 1 |
| fi |
| |
| verifymodinfo || return 1 |
| |
| python3 -c "import json, os |
| dir = '$1' |
| while dir.endswith('/'): |
| dir = dir[:-1] |
| prefix = dir + '/' |
| module_info = json.load(open('$ANDROID_PRODUCT_OUT/module-info.json')) |
| results = set() |
| for m in module_info.values(): |
| for path in m.get(u'path', []): |
| if path == dir or path.startswith(prefix): |
| name = m.get(u'module_name') |
| if name: |
| results.add(name) |
| for name in sorted(results): |
| print(name) |
| " |
| } |
| |
| |
| # Go to a specific module in the android tree, as cached in module-info.json. If any build change |
| # is made, and it should be reflected in the output, you should run 'refreshmod' first. |
| function gomod() { |
| if [[ $# -ne 1 ]]; then |
| echo "usage: gomod <module>" >&2 |
| return 1 |
| fi |
| |
| local path="$(pathmod $@)" |
| if [ -z "$path" ]; then |
| return 1 |
| fi |
| cd $path |
| } |
| |
| # Gets the list of a module's installed outputs, as cached in module-info.json. |
| # If any build change is made, and it should be reflected in the output, you should run 'refreshmod' first. |
| function outmod() { |
| if [[ $# -ne 1 ]]; then |
| echo "usage: outmod <module>" >&2 |
| return 1 |
| fi |
| |
| verifymodinfo || return 1 |
| |
| local relpath |
| relpath=$(python3 -c "import json, os |
| module = '$1' |
| module_info = json.load(open('$ANDROID_PRODUCT_OUT/module-info.json')) |
| if module not in module_info: |
| exit(1) |
| for output in module_info[module]['installed']: |
| print(os.path.join('$ANDROID_BUILD_TOP', output))" 2>/dev/null) |
| |
| if [ $? -ne 0 ]; then |
| echo "Could not find module '$1' (try 'refreshmod' if there have been build changes?)" >&2 |
| return 1 |
| elif [ ! -z "$relpath" ]; then |
| echo "$relpath" |
| fi |
| } |
| |
| # adb install a module's apk, as cached in module-info.json. If any build change |
| # is made, and it should be reflected in the output, you should run 'refreshmod' first. |
| # Usage: installmod [adb install arguments] <module> |
| # For example: installmod -r Dialer -> adb install -r /path/to/Dialer.apk |
| function installmod() { |
| if [[ $# -eq 0 ]]; then |
| echo "usage: installmod [adb install arguments] <module>" >&2 |
| echo "" >&2 |
| echo "Only flags to be passed after the \"install\" in adb install are supported," >&2 |
| echo "with the exception of -s. If -s is passed it will be placed before the \"install\"." >&2 |
| echo "-s must be the first flag passed if it exists." >&2 |
| return 1 |
| fi |
| |
| local _path |
| _path=$(outmod ${@:$#:1}) |
| if [ $? -ne 0 ]; then |
| return 1 |
| fi |
| |
| _path=$(echo "$_path" | grep -E \\.apk$ | head -n 1) |
| if [ -z "$_path" ]; then |
| echo "Module '$1' does not produce a file ending with .apk (try 'refreshmod' if there have been build changes?)" >&2 |
| return 1 |
| fi |
| local serial_device="" |
| if [[ "$1" == "-s" ]]; then |
| if [[ $# -le 2 ]]; then |
| echo "-s requires an argument" >&2 |
| return 1 |
| fi |
| serial_device="-s $2" |
| shift 2 |
| fi |
| local length=$(( $# - 1 )) |
| echo adb $serial_device install ${@:1:$length} $_path |
| adb $serial_device install ${@:1:$length} $_path |
| } |
| |
| function _complete_android_module_names() { |
| local word=${COMP_WORDS[COMP_CWORD]} |
| COMPREPLY=( $(allmod | grep -E "^$word") ) |
| } |
| |
| # Print colored exit condition |
| function pez { |
| "$@" |
| local retval=$? |
| if [ $retval -ne 0 ] |
| then |
| echo $'\E'"[0;31mFAILURE\e[00m" |
| else |
| echo $'\E'"[0;32mSUCCESS\e[00m" |
| fi |
| return $retval |
| } |
| |
| function get_make_command() |
| { |
| # If we're in the top of an Android tree, use soong_ui.bash instead of make |
| if [ -f build/soong/soong_ui.bash ]; then |
| # Always use the real make if -C is passed in |
| for arg in "$@"; do |
| if [[ $arg == -C* ]]; then |
| echo command make |
| return |
| fi |
| done |
| echo build/soong/soong_ui.bash --make-mode |
| else |
| echo command make |
| fi |
| } |
| |
| function _wrap_build() |
| { |
| if [[ "${ANDROID_QUIET_BUILD:-}" == true ]]; then |
| "$@" |
| return $? |
| fi |
| local start_time=$(date +"%s") |
| "$@" |
| local ret=$? |
| local end_time=$(date +"%s") |
| local tdiff=$(($end_time-$start_time)) |
| local hours=$(($tdiff / 3600 )) |
| local mins=$((($tdiff % 3600) / 60)) |
| local secs=$(($tdiff % 60)) |
| local ncolors=$(tput colors 2>/dev/null) |
| if [ -n "$ncolors" ] && [ $ncolors -ge 8 ]; then |
| color_failed=$'\E'"[0;31m" |
| color_success=$'\E'"[0;32m" |
| color_warning=$'\E'"[0;33m" |
| color_reset=$'\E'"[00m" |
| else |
| color_failed="" |
| color_success="" |
| color_reset="" |
| fi |
| |
| echo |
| if [ $ret -eq 0 ] ; then |
| echo -n "${color_success}#### build completed successfully " |
| else |
| echo -n "${color_failed}#### failed to build some targets " |
| fi |
| if [ $hours -gt 0 ] ; then |
| printf "(%02g:%02g:%02g (hh:mm:ss))" $hours $mins $secs |
| elif [ $mins -gt 0 ] ; then |
| printf "(%02g:%02g (mm:ss))" $mins $secs |
| elif [ $secs -gt 0 ] ; then |
| printf "(%s seconds)" $secs |
| fi |
| echo " ####${color_reset}" |
| echo |
| return $ret |
| } |
| |
| function _trigger_build() |
| ( |
| local -r bc="$1"; shift |
| local T=$(gettop) |
| if [ -n "$T" ]; then |
| _wrap_build "$T/build/soong/soong_ui.bash" --build-mode --${bc} --dir="$(pwd)" "$@" |
| else |
| >&2 echo "Couldn't locate the top of the tree. Try setting TOP." |
| return 1 |
| fi |
| local ret=$? |
| if [[ ret -eq 0 && -z "${ANDROID_QUIET_BUILD:-}" && -n "${ANDROID_BUILD_BANNER}" ]]; then |
| echo "${ANDROID_BUILD_BANNER}" |
| fi |
| return $ret |
| ) |
| |
| function m() |
| ( |
| _trigger_build "all-modules" "$@" |
| ) |
| |
| function mm() |
| ( |
| _trigger_build "modules-in-a-dir-no-deps" "$@" |
| ) |
| |
| function mmm() |
| ( |
| _trigger_build "modules-in-dirs-no-deps" "$@" |
| ) |
| |
| function mma() |
| ( |
| _trigger_build "modules-in-a-dir" "$@" |
| ) |
| |
| function mmma() |
| ( |
| _trigger_build "modules-in-dirs" "$@" |
| ) |
| |
| function make() |
| { |
| _wrap_build $(get_make_command "$@") "$@" |
| } |
| |
| function _multitree_lunch_error() |
| { |
| >&2 echo "Couldn't locate the top of the tree. Please run \'source build/envsetup.sh\' and multitree_lunch from the root of your workspace." |
| } |
| |
| function multitree_build() |
| { |
| local T=$(multitree_gettop) |
| if [ -n "$T" ]; then |
| "$T/orchestrator/build/orchestrator/core/orchestrator.py" "$@" |
| else |
| _multitree_lunch_error |
| return 1 |
| fi |
| } |
| |
| function provision() |
| { |
| if [ ! "$ANDROID_PRODUCT_OUT" ]; then |
| echo "Couldn't locate output files. Try running 'lunch' first." >&2 |
| return 1 |
| fi |
| if [ ! -e "$ANDROID_PRODUCT_OUT/provision-device" ]; then |
| echo "There is no provisioning script for the device." >&2 |
| return 1 |
| fi |
| |
| # Check if user really wants to do this. |
| if [ "$1" = "--no-confirmation" ]; then |
| shift 1 |
| else |
| echo "This action will reflash your device." |
| echo "" |
| echo "ALL DATA ON THE DEVICE WILL BE IRREVOCABLY ERASED." |
| echo "" |
| echo -n "Are you sure you want to do this (yes/no)? " |
| read |
| if [[ "${REPLY}" != "yes" ]] ; then |
| echo "Not taking any action. Exiting." >&2 |
| return 1 |
| fi |
| fi |
| "$ANDROID_PRODUCT_OUT/provision-device" "$@" |
| } |
| |
| # Zsh needs bashcompinit called to support bash-style completion. |
| function enable_zsh_completion() { |
| # Don't override user's options if bash-style completion is already enabled. |
| if ! declare -f complete >/dev/null; then |
| autoload -U compinit && compinit |
| autoload -U bashcompinit && bashcompinit |
| fi |
| } |
| |
| function validate_current_shell() { |
| local current_sh="$(ps -o command -p $$)" |
| case "$current_sh" in |
| *bash*) |
| function check_type() { type -t "$1"; } |
| ;; |
| *zsh*) |
| function check_type() { type "$1"; } |
| enable_zsh_completion ;; |
| *) |
| echo -e "WARNING: Only bash and zsh are supported.\nUse of other shell would lead to erroneous results." |
| ;; |
| esac |
| } |
| |
| # Execute the contents of any vendorsetup.sh files we can find. |
| # Unless we find an allowed-vendorsetup_sh-files file, in which case we'll only |
| # load those. |
| # |
| # This allows loading only approved vendorsetup.sh files |
| function source_vendorsetup() { |
| unset VENDOR_PYTHONPATH |
| local T="$(gettop)" |
| allowed= |
| for f in $(cd "$T" && find -L device vendor product -maxdepth 4 -name 'allowed-vendorsetup_sh-files' 2>/dev/null | sort); do |
| if [ -n "$allowed" ]; then |
| echo "More than one 'allowed_vendorsetup_sh-files' file found, not including any vendorsetup.sh files:" |
| echo " $allowed" |
| echo " $f" |
| return |
| fi |
| allowed="$T/$f" |
| done |
| |
| allowed_files= |
| [ -n "$allowed" ] && allowed_files=$(cat "$allowed") |
| for dir in device vendor product; do |
| for f in $(cd "$T" && test -d $dir && \ |
| find -L $dir -maxdepth 4 -name 'vendorsetup.sh' 2>/dev/null | sort); do |
| |
| if [[ -z "$allowed" || "$allowed_files" =~ $f ]]; then |
| echo "including $f"; . "$T/$f" |
| else |
| echo "ignoring $f, not in $allowed" |
| fi |
| done |
| done |
| |
| if [[ "${PWD}" == /google/cog/* ]]; then |
| f="build/make/cogsetup.sh" |
| echo "including $f"; . "$T/$f" |
| fi |
| } |
| |
| function showcommands() { |
| local T=$(gettop) |
| if [[ -z "$TARGET_PRODUCT" ]]; then |
| >&2 echo "TARGET_PRODUCT not set. Run lunch." |
| return |
| fi |
| case $(uname -s) in |
| Darwin) |
| PREBUILT_NAME=darwin-x86 |
| ;; |
| Linux) |
| PREBUILT_NAME=linux-x86 |
| ;; |
| *) |
| >&2 echo Unknown host $(uname -s) |
| return |
| ;; |
| esac |
| OUT_DIR="$(get_abs_build_var OUT_DIR)" |
| if [[ "$1" == "--regenerate" ]]; then |
| shift 1 |
| NINJA_ARGS="-t commands $@" m |
| else |
| (cd $T && prebuilts/build-tools/$PREBUILT_NAME/bin/ninja \ |
| -f $OUT_DIR/combined-${TARGET_PRODUCT}.ninja \ |
| -t commands "$@") |
| fi |
| } |
| |
| function avbtool() { |
| if [[ ! -f "$ANDROID_SOONG_HOST_OUT"/bin/avbtool ]]; then |
| m avbtool |
| fi |
| "$ANDROID_SOONG_HOST_OUT"/bin/avbtool $@ |
| } |
| |
| function overrideflags() { |
| local T="$(gettop)" |
| (\cd "${T}" && build/make/tools/overrideflags.sh "$@") |
| } |
| |
| function aninja() { |
| local T="$(gettop)" |
| (\cd "${T}" && prebuilts/build-tools/linux-x86/bin/ninja -f out/combined-${TARGET_PRODUCT}.ninja "$@") |
| } |
| |
| validate_current_shell |
| set_global_paths |
| source_vendorsetup |
| addcompletions |
| |
