blob: 972b10c0a6c75c2c2555542d7daed4ea134e2c60 [file] [log] [blame]
#
# Copyright (C) 2006 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Configuration for Linux on ARM.
# Included by combo/select.mk
# You can set TARGET_ARCH_VARIANT to use an arch version other
# than ARMv5TE. Each value should correspond to a file named
# $(BUILD_COMBOS)/arch/<name>.mk which must contain
# makefile variable definitions similar to the preprocessor
# defines in system/core/include/arch/<combo>/AndroidConfig.h. Their
# purpose is to allow module Android.mk files to selectively compile
# different versions of code based upon the funtionality and
# instructions available in a given architecture version.
#
# The blocks also define specific arch_variant_cflags, which
# include defines, and compiler settings for the given architecture
# version.
#
ifeq ($(strip $(TARGET_ARCH_VARIANT)),)
TARGET_ARCH_VARIANT := armv5te
endif
TARGET_ARCH_SPECIFIC_MAKEFILE := $(BUILD_COMBOS)/arch/$(TARGET_ARCH)/$(TARGET_ARCH_VARIANT).mk
ifeq ($(strip $(wildcard $(TARGET_ARCH_SPECIFIC_MAKEFILE))),)
$(error Unknown ARM architecture version: $(TARGET_ARCH_VARIANT))
endif
include $(TARGET_ARCH_SPECIFIC_MAKEFILE)
# You can set TARGET_TOOLS_PREFIX to get gcc from somewhere else
ifeq ($(strip $(TARGET_TOOLS_PREFIX)),)
TARGET_TOOLS_PREFIX := \
prebuilt/$(HOST_PREBUILT_TAG)/toolchain/arm-eabi-4.4.0/bin/arm-eabi-
endif
TARGET_CC := $(TARGET_TOOLS_PREFIX)gcc$(HOST_EXECUTABLE_SUFFIX)
TARGET_CXX := $(TARGET_TOOLS_PREFIX)g++$(HOST_EXECUTABLE_SUFFIX)
TARGET_AR := $(TARGET_TOOLS_PREFIX)ar$(HOST_EXECUTABLE_SUFFIX)
TARGET_OBJCOPY := $(TARGET_TOOLS_PREFIX)objcopy$(HOST_EXECUTABLE_SUFFIX)
TARGET_LD := $(TARGET_TOOLS_PREFIX)ld$(HOST_EXECUTABLE_SUFFIX)
TARGET_NO_UNDEFINED_LDFLAGS := -Wl,--no-undefined
TARGET_arm_CFLAGS := -O2 \
-fomit-frame-pointer \
-fstrict-aliasing \
-funswitch-loops \
-finline-limit=300
# Modules can choose to compile some source as thumb. As
# non-thumb enabled targets are supported, this is treated
# as a 'hint'. If thumb is not enabled, these files are just
# compiled as ARM.
ifeq ($(ARCH_ARM_HAVE_THUMB_SUPPORT),true)
TARGET_thumb_CFLAGS := -mthumb \
-Os \
-fomit-frame-pointer \
-fno-strict-aliasing \
-finline-limit=64
else
TARGET_thumb_CFLAGS := $(TARGET_arm_CFLAGS)
endif
# Set FORCE_ARM_DEBUGGING to "true" in your buildspec.mk
# or in your environment to force a full arm build, even for
# files that are normally built as thumb; this can make
# gdb debugging easier. Don't forget to do a clean build.
#
# NOTE: if you try to build a -O0 build with thumb, several
# of the libraries (libpv, libwebcore, libkjs) need to be built
# with -mlong-calls. When built at -O0, those libraries are
# too big for a thumb "BL <label>" to go from one end to the other.
ifeq ($(FORCE_ARM_DEBUGGING),true)
TARGET_arm_CFLAGS += -fno-omit-frame-pointer -fno-strict-aliasing
TARGET_thumb_CFLAGS += -marm -fno-omit-frame-pointer
endif
android_config_h := $(call select-android-config-h,linux-arm)
arch_include_dir := $(dir $(android_config_h))
TARGET_GLOBAL_CFLAGS += \
-msoft-float -fpic \
-ffunction-sections \
-funwind-tables \
-fstack-protector \
-fno-short-enums \
$(arch_variant_cflags) \
-include $(android_config_h) \
-I $(arch_include_dir)
TARGET_GLOBAL_LDFLAGS += \
$(arch_variant_ldflags)
# We only need thumb interworking in cases where thumb support
# is available in the architecture, and just to be sure, (and
# since sometimes thumb-interwork appears to be default), we
# specifically disable when thumb support is unavailable.
ifeq ($(ARCH_ARM_HAVE_THUMB_SUPPORT),true)
TARGET_GLOBAL_CFLAGS += -mthumb-interwork
else
TARGET_GLOBAL_CFLAGS += -mno-thumb-interwork
endif
TARGET_GLOBAL_CPPFLAGS += -fvisibility-inlines-hidden
TARGET_RELEASE_CFLAGS := \
-DNDEBUG \
-g \
-Wstrict-aliasing=2 \
-finline-functions \
-fno-inline-functions-called-once \
-fgcse-after-reload \
-frerun-cse-after-loop \
-frename-registers
libc_root := bionic/libc
libm_root := bionic/libm
libstdc++_root := bionic/libstdc++
libthread_db_root := bionic/libthread_db
## on some hosts, the target cross-compiler is not available so do not run this command
ifneq ($(wildcard $(TARGET_CC)),)
# We compile with the global cflags to ensure that
# any flags which affect libgcc are correctly taken
# into account.
TARGET_LIBGCC := $(shell $(TARGET_CC) $(TARGET_GLOBAL_CFLAGS) -print-libgcc-file-name)
endif
# Define FDO (Feedback Directed Optimization) options.
TARGET_FDO_CFLAGS:=
TARGET_FDO_LIB:=
target_libgcov := $(shell $(TARGET_CC) $(TARGET_GLOBAL_CFLAGS) \
--print-file-name=libgcov.a)
ifneq ($(strip $(BUILD_FDO_INSTRUMENT)),)
# Set BUILD_FDO_INSTRUMENT=true to turn on FDO instrumentation.
# The profile will be generated on /data/local/tmp/profile on the device.
TARGET_FDO_CFLAGS := -fprofile-generate=/data/local/tmp/profile -DANDROID_FDO
TARGET_FDO_LIB := $(target_libgcov)
else
# If BUILD_FDO_INSTRUMENT is turned off, then consider doing the FDO optimizations.
# Set TARGET_FDO_PROFILE_PATH to set a custom profile directory for your build.
ifeq ($(strip $(TARGET_FDO_PROFILE_PATH)),)
TARGET_FDO_PROFILE_PATH := fdo/profiles/$(TARGET_ARCH)/$(TARGET_ARCH_VARIANT)
else
ifeq ($(strip $(wildcard $(TARGET_FDO_PROFILE_PATH))),)
$(warning Custom TARGET_FDO_PROFILE_PATH supplied, but directory does not exist. Turn off FDO.)
endif
endif
# If the FDO profile directory can't be found, then FDO is off.
ifneq ($(strip $(wildcard $(TARGET_FDO_PROFILE_PATH))),)
TARGET_FDO_CFLAGS := -fprofile-use=$(TARGET_FDO_PROFILE_PATH) -DANDROID_FDO
TARGET_FDO_LIB := $(target_libgcov)
endif
endif
# unless CUSTOM_KERNEL_HEADERS is defined, we're going to use
# symlinks located in out/ to point to the appropriate kernel
# headers. see 'config/kernel_headers.make' for more details
#
ifneq ($(CUSTOM_KERNEL_HEADERS),)
KERNEL_HEADERS_COMMON := $(CUSTOM_KERNEL_HEADERS)
KERNEL_HEADERS_ARCH := $(CUSTOM_KERNEL_HEADERS)
else
KERNEL_HEADERS_COMMON := $(libc_root)/kernel/common
KERNEL_HEADERS_ARCH := $(libc_root)/kernel/arch-$(TARGET_ARCH)
endif
KERNEL_HEADERS := $(KERNEL_HEADERS_COMMON) $(KERNEL_HEADERS_ARCH)
TARGET_C_INCLUDES := \
$(libc_root)/arch-arm/include \
$(libc_root)/include \
$(libstdc++_root)/include \
$(KERNEL_HEADERS) \
$(libm_root)/include \
$(libm_root)/include/arch/arm \
$(libthread_db_root)/include
TARGET_CRTBEGIN_STATIC_O := $(TARGET_OUT_STATIC_LIBRARIES)/crtbegin_static.o
TARGET_CRTBEGIN_DYNAMIC_O := $(TARGET_OUT_STATIC_LIBRARIES)/crtbegin_dynamic.o
TARGET_CRTEND_O := $(TARGET_OUT_STATIC_LIBRARIES)/crtend_android.o
TARGET_STRIP_MODULE:=true
TARGET_DEFAULT_SYSTEM_SHARED_LIBRARIES := libc libstdc++ libm
TARGET_CUSTOM_LD_COMMAND := true
# Enable the Dalvik JIT compiler if not already specified.
ifeq ($(strip $(WITH_JIT)),)
WITH_JIT := true
endif
define transform-o-to-shared-lib-inner
$(TARGET_CXX) \
-nostdlib -Wl,-soname,$(notdir $@) -Wl,-T,$(BUILD_SYSTEM)/armelf.xsc \
-Wl,--gc-sections \
-Wl,-shared,-Bsymbolic \
$(TARGET_GLOBAL_LD_DIRS) \
$(PRIVATE_ALL_OBJECTS) \
-Wl,--whole-archive \
$(call normalize-host-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
-Wl,--no-whole-archive \
$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
-o $@ \
$(PRIVATE_LDFLAGS) \
$(TARGET_GLOBAL_LDFLAGS) \
$(TARGET_FDO_LIB) \
$(TARGET_LIBGCC)
endef
define transform-o-to-executable-inner
$(TARGET_CXX) -nostdlib -Bdynamic -Wl,-T,$(BUILD_SYSTEM)/armelf.x \
-Wl,-dynamic-linker,/system/bin/linker \
-Wl,--gc-sections \
-Wl,-z,nocopyreloc \
-o $@ \
$(TARGET_GLOBAL_LD_DIRS) \
-Wl,-rpath-link=$(TARGET_OUT_INTERMEDIATE_LIBRARIES) \
$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
$(TARGET_CRTBEGIN_DYNAMIC_O) \
$(PRIVATE_ALL_OBJECTS) \
$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
$(PRIVATE_LDFLAGS) \
$(TARGET_GLOBAL_LDFLAGS) \
$(TARGET_FDO_LIB) \
$(TARGET_LIBGCC) \
$(TARGET_CRTEND_O)
endef
define transform-o-to-static-executable-inner
$(TARGET_CXX) -nostdlib -Bstatic -Wl,-T,$(BUILD_SYSTEM)/armelf.x \
-Wl,--gc-sections \
-o $@ \
$(TARGET_GLOBAL_LD_DIRS) \
$(TARGET_CRTBEGIN_STATIC_O) \
$(PRIVATE_LDFLAGS) \
$(TARGET_GLOBAL_LDFLAGS) \
$(PRIVATE_ALL_OBJECTS) \
$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
$(TARGET_FDO_LIB) \
$(TARGET_LIBGCC) \
$(TARGET_CRTEND_O)
endef