Reconcile with jb-release
Change-Id: Ibc74bebbb56ee41e45e79ca3d36f176fa049c0da
diff --git a/CleanSpec.mk b/CleanSpec.mk
index b1b139a..74ad978 100644
--- a/CleanSpec.mk
+++ b/CleanSpec.mk
@@ -122,10 +122,8 @@
# Changing where ro.carrier value is instantiated for system/build.prop
$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
+# Now we switched to build against Mac OS X SDK 10.6
+$(call add-clean-step, rm -rf $(OUT_DIR)/host/darwin-x86/obj)
# ************************************************
# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
diff --git a/core/Makefile b/core/Makefile
index 78b9f1e..f0b866a 100644
--- a/core/Makefile
+++ b/core/Makefile
@@ -1433,6 +1433,7 @@
done; \
if [ $$FAIL ]; then exit 1; fi
$(hide) ( \
+ ATREE_STRIP="strip -x" \
$(HOST_OUT_EXECUTABLES)/atree \
$(addprefix -f ,$(PRIVATE_INPUT_FILES)) \
-m $(PRIVATE_DEP_FILE) \
diff --git a/core/binary.mk b/core/binary.mk
index 04ac90b..04e0128 100644
--- a/core/binary.mk
+++ b/core/binary.mk
@@ -148,6 +148,15 @@
LOCAL_LDFLAGS += $(TARGET_FDO_CFLAGS)
endif
+####################################################
+## Add profiling flags if aprof is turned on
+####################################################
+ifeq ($(strip $(LOCAL_ENABLE_APROF)),true)
+ # -ffunction-sections and -fomit-frame-pointer are conflict with -pg
+ LOCAL_CFLAGS += -fno-omit-frame-pointer -fno-function-sections -pg
+ LOCAL_CPPFLAGS += -fno-omit-frame-pointer -fno-function-sections -pg
+endif
+
###########################################################
## Explicitly declare assembly-only __ASSEMBLY__ macro for
## assembly source
diff --git a/core/build_id.mk b/core/build_id.mk
index 2ad4940..e954794 100644
--- a/core/build_id.mk
+++ b/core/build_id.mk
@@ -1,4 +1,3 @@
-
#
# Copyright (C) 2008 The Android Open Source Project
#
@@ -14,9 +13,20 @@
# See the License for the specific language governing permissions and
# limitations under the License.
#
+
+#
+# Defines branch-specific values.
+#
+
# BUILD_ID is usually used to specify the branch name
# (like "MAIN") or a branch name and a release candidate
-# (like "CRB01"). It must be a single word, and is
+# (like "TC1-RC5"). It must be a single word, and is
# capitalized by convention.
+#
+BUILD_ID := OPENMASTER
-export BUILD_ID=JRO03C
+# DISPLAY_BUILD_NUMBER should only be set for development branches,
+# If set, the BUILD_NUMBER (cl) is appended to the BUILD_ID for
+# a more descriptive BUILD_ID_DISPLAY, otherwise BUILD_ID_DISPLAY
+# is the same as BUILD_ID
+DISPLAY_BUILD_NUMBER := true
diff --git a/core/clear_vars.mk b/core/clear_vars.mk
index 5209a04..1fdadad 100644
--- a/core/clear_vars.mk
+++ b/core/clear_vars.mk
@@ -79,6 +79,8 @@
LOCAL_COPY_HEADERS:=
LOCAL_FORCE_STATIC_EXECUTABLE:=
LOCAL_ADDITIONAL_DEPENDENCIES:=
+LOCAL_ENABLE_APROF:=
+LOCAL_ENABLE_APROF_JNI:=
LOCAL_COMPRESS_MODULE_SYMBOLS:=
LOCAL_STRIP_MODULE:=
LOCAL_POST_PROCESS_COMMAND:=true
diff --git a/core/combo/HOST_darwin-x86.mk b/core/combo/HOST_darwin-x86.mk
index 198c53f..85bb2cd 100644
--- a/core/combo/HOST_darwin-x86.mk
+++ b/core/combo/HOST_darwin-x86.mk
@@ -29,27 +29,29 @@
HOST_GLOBAL_LDFLAGS += -m32
endif # BUILD_HOST_64bit
-# Use the Mac OSX SDK 10.5 if the build host is 10.6
build_mac_version := $(shell sw_vers -productVersion)
-ifneq ($(filter 10.6.%, $(build_mac_version)),)
-sdk_105_root := /Developer/SDKs/MacOSX10.5.sdk
-ifeq ($(wildcard $(sdk_105_root)),)
+mac_sdk_version := 10.6
+mac_sdk_root := /Developer/SDKs/MacOSX$(mac_sdk_version).sdk
+ifeq ($(wildcard $(mac_sdk_root)),)
+recent_xcode4_mac_sdk_root := /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX$(mac_sdk_version).sdk
+ifeq ($(wildcard $(recent_xcode4_mac_sdk_root)),)
$(warning *****************************************************)
-$(warning * You are building on Mac OSX 10.6.)
-$(warning * Can not find SDK 10.5 at $(sdk_105_root))
+$(warning * Can not find SDK $(mac_sdk_version) at $(mac_sdk_root))
+$(warning * or $(recent_xcode4_mac_sdk_root))
$(warning *****************************************************)
$(error Stop.)
endif
+mac_sdk_root := $(recent_xcode4_mac_sdk_root)
+endif
-HOST_GLOBAL_CFLAGS += -isysroot $(sdk_105_root) -mmacosx-version-min=10.5
-HOST_GLOBAL_LDFLAGS += -isysroot $(sdk_105_root) -mmacosx-version-min=10.5
-endif # build_mac_version is 10.6
+HOST_GLOBAL_CFLAGS += -isysroot $(mac_sdk_root) -mmacosx-version-min=$(mac_sdk_version)
+HOST_GLOBAL_LDFLAGS += -isysroot $(mac_sdk_root) -mmacosx-version-min=$(mac_sdk_version)
HOST_GLOBAL_CFLAGS += -fPIC
HOST_NO_UNDEFINED_LDFLAGS := -Wl,-undefined,error
-HOST_CC := $(CC)
-HOST_CXX := $(CXX)
+HOST_CC := gcc
+HOST_CXX := g++
HOST_AR := $(AR)
HOST_STRIP := $(STRIP)
HOST_STRIP_COMMAND = $(HOST_STRIP) --strip-debug $< -o $@
@@ -59,7 +61,7 @@
HOST_GLOBAL_CFLAGS += \
-include $(call select-android-config-h,darwin-x86)
-ifneq ($(filter 10.7.%, $(build_mac_version)),)
+ifneq ($(filter 10.7 10.7.% 10.8 10.8.%, $(build_mac_version)),)
HOST_RUN_RANLIB_AFTER_COPYING := false
else
HOST_RUN_RANLIB_AFTER_COPYING := true
diff --git a/core/combo/TARGET_linux-arm.mk b/core/combo/TARGET_linux-arm.mk
index 4a461f8..14c3d28 100644
--- a/core/combo/TARGET_linux-arm.mk
+++ b/core/combo/TARGET_linux-arm.mk
@@ -181,7 +181,7 @@
TARGET_FDO_LIB:=
target_libgcov := $(shell $(TARGET_CC) $(TARGET_GLOBAL_CFLAGS) \
- --print-file-name=libgcov.a)
+ -print-file-name=libgcov.a)
ifneq ($(strip $(BUILD_FDO_INSTRUMENT)),)
# Set BUILD_FDO_INSTRUMENT=true to turn on FDO instrumentation.
# The profile will be generated on /data/local/tmp/profile on the device.
@@ -280,6 +280,9 @@
$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTBEGIN_DYNAMIC_O)) \
$(PRIVATE_ALL_OBJECTS) \
+ -Wl,--whole-archive \
+ $(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
+ -Wl,--no-whole-archive \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \
$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \
@@ -299,6 +302,9 @@
$(TARGET_GLOBAL_LDFLAGS) \
$(PRIVATE_LDFLAGS) \
$(PRIVATE_ALL_OBJECTS) \
+ -Wl,--whole-archive \
+ $(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
+ -Wl,--no-whole-archive \
$(call normalize-target-libraries,$(filter-out %libc_nomalloc.a,$(filter-out %libc.a,$(PRIVATE_ALL_STATIC_LIBRARIES)))) \
-Wl,--start-group \
$(call normalize-target-libraries,$(filter %libc.a,$(PRIVATE_ALL_STATIC_LIBRARIES))) \
diff --git a/core/combo/TARGET_linux-sh.mk b/core/combo/TARGET_linux-sh.mk
index 88c6215..9ecd649 100644
--- a/core/combo/TARGET_linux-sh.mk
+++ b/core/combo/TARGET_linux-sh.mk
@@ -153,6 +153,9 @@
$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTBEGIN_DYNAMIC_O)) \
$(PRIVATE_ALL_OBJECTS) \
+ -Wl,--whole-archive \
+ $(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
+ -Wl,--no-whole-archive \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \
$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \
@@ -170,6 +173,9 @@
$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTBEGIN_STATIC_O)) \
$(PRIVATE_LDFLAGS) \
$(PRIVATE_ALL_OBJECTS) \
+ -Wl,--whole-archive \
+ $(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
+ -Wl,--no-whole-archive \
-Wl,--start-group \
$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
-Wl,--end-group \
diff --git a/core/combo/TARGET_linux-x86.mk b/core/combo/TARGET_linux-x86.mk
index dc4afb8..28c031d 100644
--- a/core/combo/TARGET_linux-x86.mk
+++ b/core/combo/TARGET_linux-x86.mk
@@ -36,8 +36,8 @@
# You can set TARGET_TOOLS_PREFIX to get gcc from somewhere else
ifeq ($(strip $(TARGET_TOOLS_PREFIX)),)
-TARGET_TOOLCHAIN_ROOT := prebuilts/gcc/$(HOST_PREBUILT_TAG)/x86/i686-android-linux-4.4.3
-TARGET_TOOLS_PREFIX := $(TARGET_TOOLCHAIN_ROOT)/bin/i686-android-linux-
+TARGET_TOOLCHAIN_ROOT := prebuilts/gcc/$(HOST_PREBUILT_TAG)/x86/i686-linux-android-4.6
+TARGET_TOOLS_PREFIX := $(TARGET_TOOLCHAIN_ROOT)/bin/i686-linux-android-
endif
TARGET_CC := $(TARGET_TOOLS_PREFIX)gcc$(HOST_EXECUTABLE_SUFFIX)
@@ -104,7 +104,7 @@
# however, there have been reports that this is sometimes not the case. So make
# them explicit here unless we have the time to carefully check it
#
-TARGET_GLOBAL_CFLAGS += -mstackrealign -msse3 -mfpmath=sse
+TARGET_GLOBAL_CFLAGS += -mstackrealign -msse3 -mfpmath=sse -m32
# XXX: These flags should not be defined here anymore. Instead, the Android.mk
# of the modules that depend on these features should instead check the
@@ -191,6 +191,7 @@
$(TARGET_GLOBAL_LDFLAGS) \
-nostdlib -Bdynamic \
-Wl,-dynamic-linker,/system/bin/linker \
+ -Wl,--copy-dt-needed-entries \
-Wl,-z,nocopyreloc \
-fPIE -pie \
-o $@ \
@@ -199,6 +200,9 @@
$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTBEGIN_DYNAMIC_O)) \
$(PRIVATE_ALL_OBJECTS) \
+ -Wl,--whole-archive \
+ $(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
+ -Wl,--no-whole-archive \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \
$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \
@@ -216,6 +220,9 @@
$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTBEGIN_STATIC_O)) \
$(PRIVATE_LDFLAGS) \
$(PRIVATE_ALL_OBJECTS) \
+ -Wl,--whole-archive \
+ $(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
+ -Wl,--no-whole-archive \
-Wl,--start-group \
$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
$(TARGET_LIBGCC) \
diff --git a/core/config.mk b/core/config.mk
index f02fbef..b0b5082 100644
--- a/core/config.mk
+++ b/core/config.mk
@@ -326,7 +326,7 @@
ifeq ($(HOST_OS),darwin)
dir := $(HOST_OS)-$(HOST_ARCH)
endif
-OLD_FLEX := prebuilt/$(HOST_PREBUILT_TAG)/flex/flex-2.5.4a$(HOST_EXECUTABLE_SUFFIX)
+OLD_FLEX := prebuilts/misc/$(HOST_PREBUILT_TAG)/flex/flex-2.5.4a$(HOST_EXECUTABLE_SUFFIX)
ifeq ($(HOST_OS),darwin)
# Mac OS' screwy version of java uses a non-standard directory layout
diff --git a/core/dumpvar.mk b/core/dumpvar.mk
index 0f7dd8f..4a44f77 100644
--- a/core/dumpvar.mk
+++ b/core/dumpvar.mk
@@ -16,9 +16,9 @@
endif
# Add the x86 toolchain bin dir if it actually exists
-ifneq ($(wildcard $(PWD)/prebuilts/gcc/$(HOST_PREBUILT_TAG)/x86/i686-android-linux-4.4.3/bin),)
+ifneq ($(wildcard $(PWD)/prebuilts/gcc/$(HOST_PREBUILT_TAG)/x86/i686-linux-android-4.6/bin),)
# this should be copied to HOST_OUT_EXECUTABLES instead
- ABP:=$(ABP):$(PWD)/prebuilts/gcc/$(HOST_PREBUILT_TAG)/x86/i686-android-linux-4.4.3/bin
+ ABP:=$(ABP):$(PWD)/prebuilts/gcc/$(HOST_PREBUILT_TAG)/x86/i686-linux-android-4.6/bin
endif
ANDROID_BUILD_PATHS := $(ABP)
ANDROID_PREBUILTS := prebuilt/$(HOST_PREBUILT_TAG)
diff --git a/core/executable.mk b/core/executable.mk
index 6138adb..baebc3b 100644
--- a/core/executable.mk
+++ b/core/executable.mk
@@ -12,6 +12,18 @@
LOCAL_MODULE_SUFFIX := $(TARGET_EXECUTABLE_SUFFIX)
endif
+####################################################
+## Add profiling libraries if aprof is turned
+####################################################
+ifeq ($(strip $(LOCAL_ENABLE_APROF)),true)
+ ifeq ($(LOCAL_FORCE_STATIC_EXECUTABLE), true)
+ LOCAL_STATIC_LIBRARIES += libaprof libaprof_static libc libcutils
+ else
+ LOCAL_SHARED_LIBRARIES += libaprof libaprof_runtime libc
+ endif
+ LOCAL_WHOLE_STATIC_LIBRARIES += libaprof_aux
+endif
+
include $(BUILD_SYSTEM)/dynamic_binary.mk
ifeq ($(LOCAL_FORCE_STATIC_EXECUTABLE),true)
diff --git a/core/llvm_config.mk b/core/llvm_config.mk
index bc90b95..4145028 100644
--- a/core/llvm_config.mk
+++ b/core/llvm_config.mk
@@ -41,12 +41,12 @@
endif
ifeq ($(TARGET_ARCH),x86)
CLANG_CONFIG_EXTRA_CFLAGS += \
- -target i686-android-linux \
+ -target i686-linux-android \
-nostdlibinc \
- -B$(TARGET_TOOLCHAIN_ROOT)/i686-android-linux/bin
+ -B$(TARGET_TOOLCHAIN_ROOT)/i686-linux-android/bin
CLANG_CONFIG_EXTRA_LDFLAGS += \
- -target i686-android-linux \
- -B$(TARGET_TOOLCHAIN_ROOT)/i686-android-linux/bin
+ -target i686-linux-android \
+ -B$(TARGET_TOOLCHAIN_ROOT)/i686-linux-android/bin
CLANG_CONFIG_UNKNOWN_CFLAGS += \
-finline-limit=300 \
-fno-inline-functions-called-once \
diff --git a/core/main.mk b/core/main.mk
index 407a529..08efbda 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -157,6 +157,18 @@
$(error stop)
endif
+ifeq (darwin,$(HOST_OS))
+GCC_REALPATH = $(realpath $(shell which gcc))
+ifneq ($(findstring llvm-gcc,$(GCC_REALPATH)),)
+ # Using LLVM GCC results in a non functional emulator due to it
+ # not honouring global register variables
+ $(warning ****************************************)
+ $(warning * gcc is linked to llvm-gcc which will *)
+ $(warning * not create a useable emulator. *)
+ $(warning ****************************************)
+endif
+endif
+
$(shell echo 'VERSIONS_CHECKED := $(VERSION_CHECK_SEQUENCE_NUMBER)' \
> $(OUT_DIR)/versions_checked.mk)
endif
@@ -236,6 +248,10 @@
is_sdk_build := true
endif
+## have selinux ##
+ifeq ($(HAVE_SELINUX),true)
+ADDITIONAL_BUILD_PROPERTIES += ro.build.selinux=1
+endif # HAVE_SELINUX
## user/userdebug ##
diff --git a/core/shared_library.mk b/core/shared_library.mk
index d715349..ab7480d 100644
--- a/core/shared_library.mk
+++ b/core/shared_library.mk
@@ -20,12 +20,25 @@
$(error $(LOCAL_PATH): Can not set module stem for a library)
endif
+####################################################
+## Add profiling libraries if aprof is turned
+####################################################
+ifeq ($(strip $(LOCAL_ENABLE_APROF_JNI)),true)
+ LOCAL_ENABLE_APROF := true
+ LOCAL_WHOLE_STATIC_LIBRARIES += libaprof_jni
+endif
+
+ifeq ($(strip $(LOCAL_ENABLE_APROF)),true)
+ LOCAL_SHARED_LIBRARIES += libaprof libaprof_runtime
+endif
+
# Put the built targets of all shared libraries in a common directory
# to simplify the link line.
OVERRIDE_BUILT_MODULE_PATH := $(TARGET_OUT_INTERMEDIATE_LIBRARIES)
include $(BUILD_SYSTEM)/dynamic_binary.mk
+
# Define PRIVATE_ variables from global vars
my_target_global_ld_dirs := $(TARGET_GLOBAL_LD_DIRS)
my_target_global_ldflags := $(TARGET_GLOBAL_LDFLAGS)
diff --git a/core/static_library.mk b/core/static_library.mk
index 66e091b..2a8edfd 100644
--- a/core/static_library.mk
+++ b/core/static_library.mk
@@ -18,6 +18,13 @@
$(error $(LOCAL_PATH): Can not set module stem for a library)
endif
+####################################################
+## Add profiling libraries if aprof is turned
+####################################################
+ifeq ($(strip $(LOCAL_ENABLE_APROF)),true)
+ LOCAL_WHOLE_STATIC_LIBRARIES += libaprof
+endif
+
include $(BUILD_SYSTEM)/binary.mk
ifeq ($(LOCAL_RAW_STATIC_LIBRARY),true)
diff --git a/core/version_defaults.mk b/core/version_defaults.mk
index b3e3c6e..02ac42c 100644
--- a/core/version_defaults.mk
+++ b/core/version_defaults.mk
@@ -41,7 +41,7 @@
# which is the version that we reveal to the end user.
# Update this value when the platform version changes (rather
# than overriding it somewhere else). Can be an arbitrary string.
- PLATFORM_VERSION := 4.1.1
+ PLATFORM_VERSION := 4.0.9.99.999.9999.99999
endif
ifeq "" "$(PLATFORM_SDK_VERSION)"
@@ -53,13 +53,13 @@
# intermediate builds). During development, this number remains at the
# SDK version the branch is based on and PLATFORM_VERSION_CODENAME holds
# the code-name of the new development work.
- PLATFORM_SDK_VERSION := 16
+ PLATFORM_SDK_VERSION := 15
endif
ifeq "" "$(PLATFORM_VERSION_CODENAME)"
# This is the current development code-name, if the build is not a final
# release build. If this is a final release build, it is simply "REL".
- PLATFORM_VERSION_CODENAME := REL
+ PLATFORM_VERSION_CODENAME := AOSP
endif
ifeq "" "$(DEFAULT_APP_TARGET_SDK)"
@@ -96,3 +96,4 @@
# anyone trying to parse it as an integer will probably get "0".
BUILD_NUMBER := eng.$(USER).$(shell date +%Y%m%d.%H%M%S)
endif
+
diff --git a/envsetup.sh b/envsetup.sh
index 8b7eea9..84ec3e5 100644
--- a/envsetup.sh
+++ b/envsetup.sh
@@ -118,7 +118,7 @@
export ANDROID_EABI_TOOLCHAIN=
local ARCH=$(get_build_var TARGET_ARCH)
case $ARCH in
- x86) toolchaindir=x86/i686-android-linux-4.4.3/bin
+ x86) toolchaindir=x86/i686-linux-android-4.6/bin
;;
arm) toolchaindir=arm/arm-linux-androideabi-4.6/bin
;;
@@ -737,7 +737,7 @@
local ARCH=$(get_build_var TARGET_ARCH)
local GDB
case "$ARCH" in
- x86) GDB=i686-android-linux-gdb;;
+ x86) GDB=i686-linux-android-gdb;;
arm) GDB=arm-linux-androideabi-gdb;;
*) echo "Unknown arch $ARCH"; return 1;;
esac
diff --git a/target/board/generic/BoardConfig.mk b/target/board/generic/BoardConfig.mk
index bc999fa..cee09ce 100644
--- a/target/board/generic/BoardConfig.mk
+++ b/target/board/generic/BoardConfig.mk
@@ -35,7 +35,9 @@
# Enable dex-preoptimization to speed up the first boot sequence
# of an SDK AVD. Note that this operation only works on Linux for now
ifeq ($(HOST_OS),linux)
-WITH_DEXPREOPT := true
+ ifeq ($(WITH_DEXPREOPT),)
+ WITH_DEXPREOPT := true
+ endif
endif
# Build OpenGLES emulation guest and host libraries
diff --git a/target/board/generic_mips/Android.mk b/target/board/generic_mips/Android.mk
new file mode 100644
index 0000000..abf8d57
--- /dev/null
+++ b/target/board/generic_mips/Android.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2011 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+LOCAL_PATH := $(call my-dir)
diff --git a/target/board/generic_mips/BoardConfig.mk b/target/board/generic_mips/BoardConfig.mk
new file mode 100644
index 0000000..8b81c27
--- /dev/null
+++ b/target/board/generic_mips/BoardConfig.mk
@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2011 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# BoardConfig.mk
+#
+# Product-specific compile-time definitions.
+#
+
+# The generic product target doesn't have any hardware-specific pieces.
+TARGET_NO_BOOTLOADER := true
+TARGET_NO_KERNEL := true
+
+TARGET_ARCH := mips
+ifeq (,$(TARGET_ARCH_VARIANT))
+TARGET_ARCH_VARIANT := mips32r2-fp
+endif
+TARGET_CPU_ABI := mips
+
+HAVE_HTC_AUDIO_DRIVER := true
+BOARD_USES_GENERIC_AUDIO := true
+
+# no hardware camera
+USE_CAMERA_STUB := true
+
+# Set /system/bin/sh to ash, not mksh, to make sure we can switch back.
+TARGET_SHELL := ash
+
+# Enable dex-preoptimization to speed up the first boot sequence
+# of an SDK AVD. Note that this operation only works on Linux for now
+ifeq ($(HOST_OS),linux)
+ ifeq ($(WITH_DEXPREOPT),)
+ WITH_DEXPREOPT := true
+ endif
+endif
+
+# Build OpenGLES emulation guest and host libraries
+BUILD_EMULATOR_OPENGL := true
+
+# Build and enable the OpenGL ES View renderer. When running on the emulator,
+# the GLES renderer disables itself if host GL acceleration isn't available.
+USE_OPENGL_RENDERER := true
+
+# Default to JSC until we get v8 landed
+HTTP := android
+JS_ENGINE := jsc
diff --git a/target/board/generic_mips/README.txt b/target/board/generic_mips/README.txt
new file mode 100644
index 0000000..b31a857
--- /dev/null
+++ b/target/board/generic_mips/README.txt
@@ -0,0 +1,9 @@
+The "generic_mips" product defines a MIPS based non-hardware-specific
+target without a kernel or bootloader.
+
+It can be used to build the entire user-level system, and
+will work with the emulator, though sound will not work
+(see the "emulator" product for that).
+
+It is not a product "base class"; no other products inherit
+from it or use it in any way.
diff --git a/target/board/generic_mips/device.mk b/target/board/generic_mips/device.mk
new file mode 100644
index 0000000..6edcba6
--- /dev/null
+++ b/target/board/generic_mips/device.mk
@@ -0,0 +1,31 @@
+#
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This is a build configuration for the product aspects that
+# are specific to the emulator.
+
+PRODUCT_PROPERTY_OVERRIDES := \
+ ro.ril.hsxpa=1 \
+ ro.ril.gprsclass=10
+
+PRODUCT_COPY_FILES := \
+ development/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
+ development/data/etc/vold.conf:system/etc/vold.conf \
+ development/tools/emulator/system/camera/media_profiles.xml:system/etc/media_profiles.xml
+
+PRODUCT_PACKAGES := \
+ audio.primary.goldfish \
+ libffi
diff --git a/target/board/generic_mips/system.prop b/target/board/generic_mips/system.prop
new file mode 100644
index 0000000..137a0f9
--- /dev/null
+++ b/target/board/generic_mips/system.prop
@@ -0,0 +1,6 @@
+#
+# system.prop for generic sdk
+#
+
+rild.libpath=/system/lib/libreference-ril.so
+rild.libargs=-d /dev/ttyS0
diff --git a/target/board/generic_x86/BoardConfig.mk b/target/board/generic_x86/BoardConfig.mk
index c62b0a4..c0d7a25 100644
--- a/target/board/generic_x86/BoardConfig.mk
+++ b/target/board/generic_x86/BoardConfig.mk
@@ -8,7 +8,7 @@
TARGET_NO_KERNEL := true
TARGET_CPU_ABI := x86
TARGET_ARCH := x86
-TARGET_ARCH_VARIANT := x86-atom
+TARGET_ARCH_VARIANT := x86
TARGET_PRELINK_MODULE := false
# The IA emulator (qemu) uses the Goldfish devices
@@ -18,6 +18,9 @@
# no hardware camera
USE_CAMERA_STUB := true
+# customize the malloced address to be 16-byte aligned
+BOARD_MALLOC_ALIGNMENT := 16
+
# Set /system/bin/sh to ash, not mksh, to make sure we can switch back.
TARGET_SHELL := ash
diff --git a/target/board/vbox_x86/BoardConfig.mk b/target/board/vbox_x86/BoardConfig.mk
index dc0f19e..80a9077 100644
--- a/target/board/vbox_x86/BoardConfig.mk
+++ b/target/board/vbox_x86/BoardConfig.mk
@@ -37,3 +37,5 @@
# The eth0 device should be started with dhcp on boot.
# Useful for emulators that don't provide a wifi connection.
NET_ETH0_STARTONBOOT := true
+
+ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.heapsize=32m
diff --git a/target/product/AndroidProducts.mk b/target/product/AndroidProducts.mk
index 44b9000..9279633 100644
--- a/target/product/AndroidProducts.mk
+++ b/target/product/AndroidProducts.mk
@@ -36,10 +36,13 @@
$(LOCAL_DIR)/core.mk \
$(LOCAL_DIR)/generic.mk \
$(LOCAL_DIR)/generic_x86.mk \
+ $(LOCAL_DIR)/generic_mips.mk \
$(LOCAL_DIR)/full.mk \
$(LOCAL_DIR)/full_x86.mk \
+ $(LOCAL_DIR)/full_mips.mk \
$(LOCAL_DIR)/vbox_x86.mk \
$(LOCAL_DIR)/sdk.mk \
$(LOCAL_DIR)/sdk_x86.mk \
+ $(LOCAL_DIR)/sdk_mips.mk \
$(LOCAL_DIR)/large_emu_hw.mk
endif
diff --git a/target/product/full_base.mk b/target/product/full_base.mk
index 6a702da..2c24b1a 100644
--- a/target/product/full_base.mk
+++ b/target/product/full_base.mk
@@ -20,9 +20,6 @@
# in inherited configurations.
PRODUCT_PACKAGES := \
- drmserver \
- libdrmframework \
- libdrmframework_jni \
libfwdlockengine \
OpenWnn \
PinyinIME \
diff --git a/target/product/full_mips.mk b/target/product/full_mips.mk
new file mode 100644
index 0000000..886cf31
--- /dev/null
+++ b/target/product/full_mips.mk
@@ -0,0 +1,32 @@
+#
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This is a build configuration for a full-featured build of the
+# Open-Source part of the tree. It's geared toward a US-centric
+# mips build quite specifically for the emulator, and might not be
+# entirely appropriate to inherit from for on-device configurations.
+
+PRODUCT_PACKAGES := \
+ Camera
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/full_base_telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_mips/device.mk)
+
+# Overrides
+PRODUCT_NAME := full_mips
+PRODUCT_DEVICE := generic_mips
+PRODUCT_BRAND := Android
+PRODUCT_MODEL := Full MIPS Android on Emulator
diff --git a/target/product/full_x86.mk b/target/product/full_x86.mk
index d6a169a..9941384 100644
--- a/target/product/full_x86.mk
+++ b/target/product/full_x86.mk
@@ -22,13 +22,14 @@
# If running on an emulator or some other device that has a LAN connection
# that isn't a wifi connection. This will instruct init.rc to enable the
# network connection so that you can use it with ADB
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/full_base_telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_x86/device.mk)
+
ifdef NET_ETH0_STARTONBOOT
PRODUCT_PROPERTY_OVERRIDES += net.eth0.startonboot=1
endif
-$(call inherit-product, $(SRC_TARGET_DIR)/product/full_base.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_x86/device.mk)
-
# Ensure we package the BIOS files too.
PRODUCT_PACKAGES += \
bios.bin \
diff --git a/target/product/generic_mips.mk b/target/product/generic_mips.mk
new file mode 100644
index 0000000..7b53d04
--- /dev/null
+++ b/target/product/generic_mips.mk
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2007 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This is a generic phone product that isn't specialized for a specific device.
+# It includes the base Android platform.
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/generic_no_telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony.mk)
+
+# Overrides
+PRODUCT_BRAND := generic_mips
+PRODUCT_DEVICE := generic_mips
+PRODUCT_NAME := generic_mips
diff --git a/target/product/generic_x86.mk b/target/product/generic_x86.mk
index 86710c4..0274b5b 100644
--- a/target/product/generic_x86.mk
+++ b/target/product/generic_x86.mk
@@ -14,10 +14,10 @@
# limitations under the License.
#
-# This is a generic product that isn't specialized for a specific device.
+# This is a generic phone product that isn't specialized for a specific device.
# It includes the base Android platform.
-$(call inherit-product, $(SRC_TARGET_DIR)/product/generic.mk)
+include $(SRC_TARGET_DIR)/product/generic.mk
# Overrides
PRODUCT_BRAND := generic_x86
diff --git a/target/product/locales_full.mk b/target/product/locales_full.mk
index 8b8ab05..3a90d2b 100644
--- a/target/product/locales_full.mk
+++ b/target/product/locales_full.mk
@@ -1,3 +1,3 @@
-PRODUCT_LOCALES := en_US cs_CZ da_DK de_AT de_CH de_DE de_LI el_GR en_AU en_CA en_GB en_NZ en_SG es_ES fr_CA fr_CH fr_BE fr_FR it_CH it_IT ja_JP ko_KR nb_NO nl_BE nl_NL pl_PL pt_PT ru_RU sv_SE tr_TR zh_CN zh_HK zh_TW am_ET hi_IN
+PRODUCT_LOCALES := en_US cs_CZ da_DK de_AT de_CH de_DE de_LI el_GR en_AU en_CA en_GB en_NZ en_SG eo_EU es_ES fr_CA fr_CH fr_BE fr_FR it_CH it_IT ja_JP ko_KR nb_NO nl_BE nl_NL pl_PL pt_PT ru_RU sv_SE tr_TR zh_CN zh_HK zh_TW am_ET hi_IN
$(call inherit-product, build/target/product/languages_full.mk)
diff --git a/target/product/sdk.mk b/target/product/sdk.mk
index 6165f71..697d295 100644
--- a/target/product/sdk.mk
+++ b/target/product/sdk.mk
@@ -89,6 +89,7 @@
development/tools/emulator/system/camera/media_codecs.xml:system/etc/media_codecs.xml \
frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
frameworks/native/data/etc/android.hardware.camera.autofocus.xml:system/etc/permissions/android.hardware.camera.autofocus.xml \
+ frameworks/av/media/libeffects/data/audio_effects.conf:system/etc/audio_effects.conf \
hardware/libhardware_legacy/audio/audio_policy.conf:system/etc/audio_policy.conf
$(call inherit-product-if-exists, frameworks/base/data/fonts/fonts.mk)
diff --git a/target/product/sdk_mips.mk b/target/product/sdk_mips.mk
new file mode 100644
index 0000000..2072400
--- /dev/null
+++ b/target/product/sdk_mips.mk
@@ -0,0 +1,28 @@
+#
+# Copyright (C) 2012 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This is a build configuration for a full-featured build of the
+# Open-Source part of the tree. It's geared toward a US-centric
+# build quite specifically for the emulator, and might not be
+# entirely appropriate to inherit from for on-device configurations.
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/sdk.mk)
+
+# Overrides
+PRODUCT_BRAND := generic_mips
+PRODUCT_NAME := sdk_mips
+PRODUCT_DEVICE := generic_mips
+PRODUCT_MODEL := Android SDK for Mips
diff --git a/target/product/sdk_x86.mk b/target/product/sdk_x86.mk
index 6c5e746..873d0c0 100644
--- a/target/product/sdk_x86.mk
+++ b/target/product/sdk_x86.mk
@@ -19,7 +19,7 @@
# build quite specifically for the emulator, and might not be
# entirely appropriate to inherit from for on-device configurations.
-$(call inherit-product, $(SRC_TARGET_DIR)/product/sdk.mk)
+include $(SRC_TARGET_DIR)/product/sdk.mk
# Overrides
PRODUCT_BRAND := generic_x86
diff --git a/tools/atree/fs.cpp b/tools/atree/fs.cpp
index b648394..9468cfd 100644
--- a/tools/atree/fs.cpp
+++ b/tools/atree/fs.cpp
@@ -152,8 +152,8 @@
int
strip_file(const string& path)
{
- // Default strip command to run is "strip" unless overridden by the STRIP env var.
- const char* strip_cmd = getenv("STRIP");
+ // Default strip command to run is "strip" unless overridden by the ATREE_STRIP env var.
+ const char* strip_cmd = getenv("ATREE_STRIP");
if (!strip_cmd || !strip_cmd[0]) {
strip_cmd = "strip";
}
@@ -163,7 +163,52 @@
return -1;
} else if (pid == 0) {
// Exec in the child. Only returns if execve failed.
- return execlp(strip_cmd, strip_cmd, path.c_str(), (char *)NULL);
+
+ int num_args = 0;
+ const char *s = strip_cmd;
+ while (*s) {
+ while (*s == ' ') ++s;
+ if (*s && *s != ' ') {
+ ++num_args;
+ while (*s && *s != ' ') ++s;
+ }
+ }
+
+ if (num_args <= 0) {
+ fprintf(stderr, "Invalid ATREE_STRIP command '%s'\n", strip_cmd);
+ return 1;
+
+ } else if (num_args == 1) {
+ return execlp(strip_cmd, strip_cmd, path.c_str(), (char *)NULL);
+
+ } else {
+ // Split the arguments if more than 1
+ char* cmd = strdup(strip_cmd);
+ const char** args = (const char**) malloc(sizeof(const char*) * (num_args + 2));
+
+ const char** curr = args;
+ char* s = cmd;
+ while (*s) {
+ while (*s == ' ') ++s;
+ if (*s && *s != ' ') {
+ *curr = s;
+ ++curr;
+ while (*s && *s != ' ') ++s;
+ if (*s) {
+ *s = '\0';
+ ++s;
+ }
+ }
+ }
+
+ args[num_args] = path.c_str();
+ args[num_args + 1] = NULL;
+
+ int ret = execvp(args[0], (char* const*)args);
+ free(args);
+ free(cmd);
+ return ret;
+ }
} else {
// Wait for child pid and return its exit code.
int status;
diff --git a/tools/droiddoc/templates-sdk/assets/js/docs.js b/tools/droiddoc/templates-sdk/assets/js/docs.js
index 0b0a375..6fec693 100644
--- a/tools/droiddoc/templates-sdk/assets/js/docs.js
+++ b/tools/droiddoc/templates-sdk/assets/js/docs.js
@@ -5,9 +5,11 @@
var NAV_PREF_TREE = "tree";
var NAV_PREF_PANELS = "panels";
var nav_pref;
-var toRoot;
var isMobile = false; // true if mobile, so we can adjust some layout
+var basePath = getBaseUri(location.pathname);
+var SITE_ROOT = toRoot + basePath.substring(1,basePath.indexOf("/",1));
+
/****** ON LOAD SET UP STUFF *********/
@@ -30,7 +32,7 @@
// set search's onkeyup handler here so we can show suggestions
// even while search results are visible
- $("#search_autocomplete").keyup(function() {return search_changed(event, false, '/')});
+ $("#search_autocomplete").keyup(function() {return search_changed(event, false, toRoot)});
// set up the search close button
$('.search .close').click(function() {
@@ -526,11 +528,6 @@
prettyPrint();
} );
-function setToRoot(root) {
- toRoot = root;
- // note: toRoot also used by carousel.js
-}
-
function init() {
//resizeNav();
diff --git a/tools/droiddoc/templates-sdk/assets/js/search_autocomplete.js b/tools/droiddoc/templates-sdk/assets/js/search_autocomplete.js
index 1838ccb..6b1e525 100644
--- a/tools/droiddoc/templates-sdk/assets/js/search_autocomplete.js
+++ b/tools/droiddoc/templates-sdk/assets/js/search_autocomplete.js
@@ -473,7 +473,7 @@
// forcefully regain key-up event control (previously jacked by search api)
$("#search_autocomplete").keyup(function(event) {
- return search_changed(event, false, '/');
+ return search_changed(event, false, toRoot);
});
// add event listeners to each tab so we can track the browser history
diff --git a/tools/droiddoc/templates-sdk/components/masthead.cs b/tools/droiddoc/templates-sdk/components/masthead.cs
index 2003e15..39293fb 100644
--- a/tools/droiddoc/templates-sdk/components/masthead.cs
+++ b/tools/droiddoc/templates-sdk/components/masthead.cs
@@ -66,8 +66,8 @@
<form onsubmit="return submit_search()">
<input id="search_autocomplete" type="text" value="" autocomplete="off" name="q"
onfocus="search_focus_changed(this, true)" onblur="search_focus_changed(this, false)"
-onkeydown="return search_changed(event, true, '/')" onkeyup="return search_changed(event, false,
-'/')" />
+onkeydown="return search_changed(event, true, '<?cs var:toroot ?>')"
+onkeyup="return search_changed(event, false, '<?cs var:toroot ?>')" />
</form>
<div class="right"></div>
<a class="close hide">close</a>
diff --git a/tools/droiddoc/templates-sdk/head_tag.cs b/tools/droiddoc/templates-sdk/head_tag.cs
index 3f91ad3..d03f6f4 100644
--- a/tools/droiddoc/templates-sdk/head_tag.cs
+++ b/tools/droiddoc/templates-sdk/head_tag.cs
@@ -11,7 +11,7 @@
<!-- BASIC STYLESHEETS -->
<link rel="stylesheet"
-href="//fonts.googleapis.com/css?family=Roboto:regular,medium,thin,italic,mediumitalic,bold" title="roboto">
+href="<?cs if:android.whichdoc != 'online' ?>http:<?cs /if ?>//fonts.googleapis.com/css?family=Roboto:regular,medium,thin,italic,mediumitalic,bold" title="roboto">
<link href="<?cs var:toroot ?>assets/css/default.css" rel="stylesheet" type="text/css">
<?cs if:reference ?>
@@ -28,6 +28,9 @@
<!-- BASIC JAVASCRIPT -->
<script src="<?cs var:toroot ?>assets/js/global-libraries-combined.js"
type="text/javascript"></script>
+<script type="text/javascript">
+ var toRoot = "<?cs var:toroot ?>";
+</script>
<script src="<?cs var:toroot ?>assets/js/docs.js" type="text/javascript"></script>
<?cs if:carousel ?>
@@ -36,7 +39,7 @@
<?cs /if ?>
<!-- search -->
-<script src="//www.google.com/jsapi" type="text/javascript"></script>
+<script src="<?cs if:android.whichdoc != 'online' ?>http:<?cs /if ?>//www.google.com/jsapi" type="text/javascript"></script>
<script src="<?cs var:toroot ?>assets/js/search_autocomplete.js" type="text/javascript"></script>
<?cs if:tabbedList ?>
@@ -48,10 +51,5 @@
<script src="<?cs var:toroot ?>assets/js/droiddoc.js" type="text/javascript"></script>
<?cs /if ?>
<script src="<?cs var:toroot ?>navtree_data.js" type="text/javascript"></script>
-<script type="text/javascript">
- setToRoot("<?cs var:toroot ?>");
- var basePath = getBaseUri(location.pathname);
- var SITE_ROOT = toRoot + basePath.substring(1,basePath.indexOf("/",1));
-</script>
</head>
\ No newline at end of file
