| # Copyright (C) 2007 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # If you don't need to do a full clean build but would like to touch |
| # a file or delete some intermediate files, add a clean step to the end |
| # of the list. These steps will only be run once, if they haven't been |
| # run before. |
| # |
| # E.g.: |
| # $(call add-clean-step, touch -c external/sqlite/sqlite3.h) |
| # $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates) |
| # |
| # Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with |
| # files that are missing or have been moved. |
| # |
| # Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory. |
| # Use $(OUT_DIR) to refer to the "out" directory. |
| # |
| # If you need to re-do something that's already mentioned, just copy |
| # the command and add it to the bottom of the list. E.g., if a change |
| # that you made last week required touching a file and a change you |
| # made today requires touching the same file, just copy the old |
| # touch step and add it to the end of the list. |
| # |
| # ************************************************ |
| # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST |
| # ************************************************ |
| |
| # For example: |
| #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates) |
| #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates) |
| #$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f) |
| #$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*) |
| |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libmediaplayerservice_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libmedia_jni_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_omx_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/vendor) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/android-info.txt) |
| $(call add-clean-step, find $(PRODUCT_OUT) -name "*.apk" | xargs rm) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/*/LINKED) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/*.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/system/lib/*.so) |
| $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/iself) |
| $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/lsd) |
| $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/apriori) |
| $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/isprelinked) |
| $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/soslim) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/*.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/system/lib/*.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/YouTube*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_omx_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/librtp_jni_intermediates) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/android-info.txt) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/JAVA_LIBRARIES/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/framework/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libbcinfo_intermediates) |
| |
| # ICS MR2!!!!!!!!!!!! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libbcinfo_intermediates) |
| |
| # WAIT, I MEAN JELLY BEAN!!!!!!!!!!!! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Changing where ro.carrier value is instantiated for system/build.prop |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Now we switched to build against Mac OS X SDK 10.6 |
| $(call add-clean-step, rm -rf $(OUT_DIR)/host/darwin-x86/obj) |
| |
| $(call add-clean-step, rm -f $(OUT_DIR)/versions_checked.mk) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o) |
| |
| # JB MR2!!!!!!! AND *NO*, THIS WILL NOT BE K-WHATEVER. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Start of "K" development! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # GCC 4.7 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o) |
| |
| # Wait, back to some JB development! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # And on to KLP... |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # KLP now based off API 18. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # Clean up around the /system/app -> /system/priv-app migration |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| |
| # Clean up old location of generated Java files from aidl |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/framework_intermediates/src) |
| |
| # Clean up ApplicationsProvider which is being removed. |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/ApplicationsProvider_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/ApplicationsProvider.apk) |
| |
| # Clean up Moto OMA DM client which isn't ready yet. |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin.dev_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin.diagmon_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.pluginhelper_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.service.api_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/DMService_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/SprintDM_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/DMService.apk) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/SprintDM.apk) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/omadm) |
| |
| # GCC 4.8 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o) |
| |
| # KLP I mean KitKat now API 19. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # 4.4.1 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # 4.4.2 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # "L" and beyond. |
| # Make libart the default runtime |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Rename persist.sys.dalvik.vm.lib to allow new default |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # KKWT development |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # L development |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # L development |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # Add ro.product.cpu.abilist{32,64} to build.prop. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Unset TARGET_PREFER_32_BIT_APPS for 64 bit targets. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Adding dalvik.vm.dex2oat-flags to eng builds |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Unset TARGET_PREFER_32_BIT_APPS for 64 bit targets. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Switching the x86 emulator over to a 64 bit primary zygote. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| |
| # Rename persist.sys.dalvik.vm.lib.1 to allow new default |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Switching PRODUCT_RUNTIMES default for some devices |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Switching to 32-bit-by-default host multilib build |
| $(call add-clean-step, rm -rf $(HOST_OUT_INTERMEDIATES)) |
| |
| # KKWT has become API 20 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # ims-common.jar added to BOOTCLASSPATH |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/ETC/init.environ.rc_intermediates) |
| |
| # Change ro.zygote for core_64_bit.mk from zygote32_64 to zygote64_32 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| |
| # Adding dalvik.vm.dex2oat-Xms, dalvik.vm.dex2oat-Xmx |
| # dalvik.vm.image-dex2oat-Xms, and dalvik.vm.image-dex2oat-Xmx |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system) |
| |
| # Switch host builds to Clang by default |
| $(call add-clean-step, rm -rf $(OUT_DIR)/host) |
| |
| # Adding dalvik.vm.dex2oat-filter |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| |
| # API 21? |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # API 21! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # API 22! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # Move to libc++ as the default STL. |
| $(call add-clean-step, rm -rf $(OUT_DIR)) |
| |
| # dex2oat instruction-set changes |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| |
| # Make GNU++11 the default standard version. This requires a cleanspec because |
| # char16_t/char32_t will be real types now instead of typedefs, which means |
| # an ABI change since the names will mangle differently. |
| $(call add-clean-step, rm -rf $(OUT_DIR)) |
| |
| # 5.1! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # Remove ro.product.locale.language/country and add ro.product.locale |
| # instead. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # On to MNC |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # Adding dalvik.vm.usejit |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| |
| # Rename dalvik.vm.usejit to debug.dalvik.vm.usejit |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| |
| # Revert rename dalvik.vm.usejit to debug.dalvik.vm.usejit |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| |
| # Change from interpret-only to verify-at-runtime. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| |
| # New York, New York! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # 23 is becoming alive!!! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Change PLATFORM_VERSION from NYC to N |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # $(PRODUCT_OUT)/recovery/root/sdcard goes from symlink to folder. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/sdcard) |
| |
| # Add BOARD_USES_SYSTEM_OTHER_ODEX |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/*) |
| |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS/previous_overlays.txt) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS/current_packages.txt) |
| |
| $(call add-clean-step, rm -rf $(HOST_OUT_INTERMEDIATES)/include) |
| |
| $(call add-clean-step, rm -rf $(HOST_OUT_COMMON_INTERMEDIATES)/APPS/*_intermediates/src) |
| $(call add-clean-step, rm -rf $(HOST_OUT_COMMON_INTERMEDIATES)/JAVA_LIBRARIES/*_intermediates/src) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS/*_intermediates/src) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/JAVA_LIBRARIES/*_intermediates/src) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/previous_gen_java_config.mk) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/current_gen_java_config.mk) |
| |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/JAVA_LIBRARIES/*/package-res.apk) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_INTERMEDIATES)/APPS/*/package-res.apk) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS/*_intermediates/src) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/JAVA_LIBRARIES/*_intermediates/src) |
| |
| $(call add-clean-step, rm -rf $(HOST_OUT_TESTCASES)) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_TESTCASES)) |
| |
| $(call add-clean-step, rm -rf $(TARGET_OUT_ETC)/init) |
| |
| # Libraries are moved from {system|vendor}/lib to ./lib/framework, ./lib/vndk, etc. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/vendor/lib*) |
| |
| # Revert that move |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/vendor/lib*) |
| |
| # Sanitized libraries now live in a different location. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/lib*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/vendor/lib*) |
| |
| # Soong module variant change, remove obsolete intermediates |
| $(call add-clean-step, rm -rf $(OUT_DIR)/soong/.intermediates) |
| |
| # Version checking moving to Soong |
| $(call add-clean-step, rm -rf $(OUT_DIR)/versions_checked.mk) |
| |
| # Vendor tests were being installed into /vendor/bin accidentally |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/vendor/nativetest*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/nativetest*) |
| |
| # Jack is no longer the default compiler, remove the intermediates |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/*/*/classes*.jack) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/*/*/jack*) |
| |
| # Move adbd from $(PRODUCT_OUT)/root/sbin to $(PRODUCT_OUT)/system/bin |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/sbin/adbd) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/sbin/adbd) |
| |
| # Soong linux -> linux_glibc rename |
| $(call add-clean-step, find $(SOONG_OUT_DIR)/.intermediates -name 'linux_x86*' | xargs rm -rf) |
| $(call add-clean-step, find $(SOONG_OUT_DIR)/.intermediates -name 'linux_common*' | xargs rm -rf) |
| |
| # Remove old aidl/logtags files that may be in the generated source directory |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/*/*_intermediates/src) |
| $(call add-clean-step, rm -f $(OUT_DIR)/target/common/obj/*/*_intermediates/java-source-list) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/host/common/obj/*/*_intermediates/src) |
| $(call add-clean-step, rm -f $(OUT_DIR)/host/common/obj/*/*_intermediates/java-source-list) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*/flat-res) |
| |
| # Remove old VNDK directories without version |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk-sp) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/vndk) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/vndk-sp) |
| |
| # Remove old dex output directories |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/*/*_intermediates/with-local/) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/*/*_intermediates/no-local/) |
| $(call add-clean-step, rm -rf $(HOST_OUT_COMMON_INTERMEDIATES)/*/*_intermediates/with-local/) |
| $(call add-clean-step, rm -rf $(HOST_OUT_COMMON_INTERMEDIATES)/*/*_intermediates/no-local/) |
| |
| # Remove legacy VINTF metadata files |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/manifest.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/vendor/manifest.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/manifest.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/vendor/compatibility_matrix.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/compatibility_matrix.xml) |
| |
| # Remove DisplayCutoutEmulation overlays |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/overlay/DisplayCutoutEmulationWide) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/overlay/DisplayCutoutEmulationNarrow) |
| |
| # Remove obsolete intermedates src files |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/*/*_intermediates/src/RenderScript.stamp*) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS/*_intermediates/src) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/JAVA_LIBRARIES/*_intermediates/src) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS/*_intermediates/java-source-list) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/JAVA_LIBRARIES/*_intermediates/java-source-list) |
| $(call add-clean-step, rm -rf $(OUT_DOCS)/*-timestamp) |
| |
| $(call add-clean-step, rm -rf $(TARGET_COMMON_OUT_ROOT)/obj_asan/APPS/*_intermediates/src) |
| $(call add-clean-step, rm -rf $(TARGET_COMMON_OUT_ROOT)/obj_asan/JAVA_LIBRARIES/*_intermediates/src) |
| $(call add-clean-step, rm -rf $(TARGET_COMMON_OUT_ROOT)/obj_asan/APPS/*_intermediates/java-source-list) |
| $(call add-clean-step, rm -rf $(TARGET_COMMON_OUT_ROOT)/obj_asan/JAVA_LIBRARIES/*_intermediates/java-source-list) |
| |
| # Remove stale init.noenforce.rc |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/init/gsi/init.noenforce.rc) |
| |
| # Clean up Launcher3 which has been replaced with Launcher3QuickStep |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/Launcher3) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/Launcher3) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/Launcher3_intermediates) |
| |
| # Remove old merged AndroidManifest.xml location |
| $(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS/*_intermediates/AndroidManifest.xml) |
| |
| $(call add-clean-step, find $(PRODUCT_OUT) -type f -name "vr_hwc*" -print0 | xargs -0 rm -f) |
| |
| $(call add-clean-step, rm -rf $(SOONG_OUT_DIR)/.intermediates/system/vold) |
| |
| # Remove product-services related files / images |
| $(call add-clean-step, find $(PRODUCT_OUT) -type f -name "*product-services*" -print0 | xargs -0 rm -rf) |
| $(call add-clean-step, find $(PRODUCT_OUT) -type d -name "*product-services*" -print0 | xargs -0 rm -rf) |
| $(call add-clean-step, find $(PRODUCT_OUT) -type l -name "*product-services*" -print0 | xargs -0 rm -rf) |
| |
| # Remove obsolete recovery etc files |
| $(call add-clean-step, rm -rf $(TARGET_RECOVERY_ROOT_OUT)/etc) |
| |
| # Remove *_OUT_INTERMEDIATE_LIBRARIES |
| $(call add-clean-step, rm -rf $(addsuffix /lib,\ |
| $(HOST_OUT_INTERMEDIATES) $(2ND_HOST_OUT_INTERMEDIATES) \ |
| $(HOST_CROSS_OUT_INTERMEDIATES) $(2ND_HOST_CROSS_OUT_INTERMEDIATES) \ |
| $(TARGET_OUT_INTERMEDIATES) $(2ND_TARGET_OUT_INTERMEDIATES))) |
| |
| # Remove strip.sh intermediates to save space |
| $(call add-clean-step, find $(OUT_DIR) \( -name "*.so.debug" -o -name "*.so.dynsyms" -o -name "*.so.funcsyms" -o -name "*.so.keep_symbols" -o -name "*.so.mini_debuginfo.xz" \) -print0 | xargs -0 rm -f) |
| |
| # Clean up old ninja files |
| $(call add-clean-step, rm -f $(OUT_DIR)/build-*-dist*.ninja) |
| |
| $(call add-clean-step, rm -f $(HOST_OUT)/*ts/host-libprotobuf-java-*.jar) |
| |
| $(call add-clean-step, find $(OUT_DIR)/target/product/mainline_arm64/system -type f -name "*.*dex" -print0 | xargs -0 rm -f) |
| |
| # Clean up aidegen |
| $(call add-clean-step, rm -f $(HOST_OUT)/bin/aidegen) |
| |
| # Remove perfprofd |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/perfprofd) |
| |
| # Remove incorrectly created directories in the source tree |
| $(call add-clean-step, find system/app system/priv-app system/framework system_other -depth -type d -print0 | xargs -0 rmdir) |
| $(call add-clean-step, rm -f .d) |
| |
| # Remove obsolete apps |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| |
| # Remove corrupt generated rule due to using toybox's sed |
| $(call add-clean-step, rm -rf $(SOONG_OUT_DIR)/.intermediates/system/core/init/generated_stub_builtin_function_map) |
| |
| # Clean up core JNI libraries moved to runtime apex |
| $(call add-clean-step, rm -f $(PRODUCT_OUT)/system/lib*/libjavacore.so) |
| $(call add-clean-step, rm -f $(PRODUCT_OUT)/system/lib*/libopenjdk.so) |
| $(call add-clean-step, rm -f $(PRODUCT_OUT)/system/lib*/libexpat.so) |
| |
| # Merge product_services into product |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/product_services) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/product_services) |
| |
| # Clean up old location of hiddenapi files |
| $(call add-clean-step, rm -f $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/hiddenapi*) |
| |
| # Clean up previous default location of RROs |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/overlay) |
| |
| # Remove ART artifacts installed only by modules `art-runtime` and |
| # `art-tools` in /system on target. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/dalvikvm) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/dalvikvm32) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/dalvikvm64) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/dex2oat) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/dex2oatd) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/dexdiag) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/dexdump) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/dexlist) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/dexoptanalyzer) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/dexoptanalyzerd) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/oatdump) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/profman) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/profmand) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libadbconnection.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libadbconnectiond.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libart-compiler.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libartd-compiler.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libart-dexlayout.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libartd-dexlayout.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libart-disassembler.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libart.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libartd.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libartbase.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libartbased.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libdexfile.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libdexfiled.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libdexfile_external.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libdexfile_support.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libdt_fd_forward.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libdt_socket.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libjdwp.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libnpt.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libopenjdkd.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libopenjdkjvm.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libopenjdkjvmd.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libopenjdkjvmti.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libopenjdkjvmtid.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libprofile.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libprofiled.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libtombstoned_client.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libvixl.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libvixld.so) |
| |
| # Clean up old location of dexpreopted boot jars |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/dex_bootjars) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/dex_bootjars_input) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libnpt.so) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*) |
| |
| # Clean up old testcase files |
| $(call add-clean-step, rm -rf $(TARGET_OUT_TESTCASES)/*) |
| $(call add-clean-step, rm -rf $(HOST_OUT_TESTCASES)/*) |
| $(call add-clean-step, rm -rf $(HOST_CROSS_OUT_TESTCASES)/*) |
| $(call add-clean-step, rm -rf $(TARGET_OUT_DATA)/*) |
| $(call add-clean-step, rm -rf $(HOST_OUT)/vts/*) |
| $(call add-clean-step, rm -rf $(HOST_OUT)/framework/vts-tradefed.jar) |
| |
| # Clean up old location of system_other.avbpubkey |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/security/avb/) |
| |
| # Clean up bufferhub files |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/hw/android.frameworks.bufferhub@1.0-service) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/init/android.frameworks.bufferhub@1.0-service.rc) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/super.img) |
| |
| $(call add-clean-step, find $(PRODUCT_OUT) -type f -name "generated_*_image_info.txt" -print0 | xargs -0 rm -f) |
| |
| # Clean up libicuuc.so and libicui18n.so |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libicu*) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/target/common/obj/framework.aidl) |
| |
| # Clean up adb_debug.propr |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/adb_debug.prop) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libjavacrypto.so) |
| |
| # Clean up old location of soft OMX plugins |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libstagefright_soft*) |
| |
| # Move odm build.prop to /odm/etc/. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/odm/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/odm/build.prop) |
| |
| # ************************************************ |
| # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST |
| # ************************************************ |
