/*
 * Copyright (C) 2012 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <gtest/gtest.h>

#include <errno.h>
#include <inttypes.h>
#include <limits.h>
#include <malloc.h>
#include <pthread.h>
#include <signal.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <time.h>
#include <unistd.h>

#include "private/ScopeGuard.h"
#include "ScopedSignalHandler.h"

TEST(pthread, pthread_key_create) {
  pthread_key_t key;
  ASSERT_EQ(0, pthread_key_create(&key, NULL));
  ASSERT_EQ(0, pthread_key_delete(key));
  // Can't delete a key that's already been deleted.
  ASSERT_EQ(EINVAL, pthread_key_delete(key));
}

TEST(pthread, pthread_keys_max) {
  // POSIX says PTHREAD_KEYS_MAX should be at least 128.
  ASSERT_GE(PTHREAD_KEYS_MAX, 128);
}

TEST(pthread, _SC_THREAD_KEYS_MAX_big_enough_for_POSIX) {
  // sysconf shouldn't return a smaller value.
  int sysconf_max = sysconf(_SC_THREAD_KEYS_MAX);
  ASSERT_GE(sysconf_max, PTHREAD_KEYS_MAX);
}

TEST(pthread, pthread_key_many_distinct) {
  // We should be able to allocate at least this many keys.
  int nkeys = sysconf(_SC_THREAD_KEYS_MAX) / 2;
  std::vector<pthread_key_t> keys;

  auto scope_guard = make_scope_guard([&keys]{
    for (auto key : keys) {
      EXPECT_EQ(0, pthread_key_delete(key));
    }
  });

  for (int i = 0; i < nkeys; ++i) {
    pthread_key_t key;
    // If this fails, it's likely that GLOBAL_INIT_THREAD_LOCAL_BUFFER_COUNT is
    // wrong.
    ASSERT_EQ(0, pthread_key_create(&key, NULL)) << i << " of " << nkeys;
    keys.push_back(key);
    ASSERT_EQ(0, pthread_setspecific(key, reinterpret_cast<void*>(i)));
  }

  for (int i = keys.size() - 1; i >= 0; --i) {
    ASSERT_EQ(reinterpret_cast<void*>(i), pthread_getspecific(keys.back()));
    pthread_key_t key = keys.back();
    keys.pop_back();
    ASSERT_EQ(0, pthread_key_delete(key));
  }
}

TEST(pthread, pthread_key_EAGAIN) {
  int sysconf_max = sysconf(_SC_THREAD_KEYS_MAX);

  std::vector<pthread_key_t> keys;
  int rv = 0;
  // Two keys are used by gtest, so sysconf_max should be more than we are
  // allowed to allocate now.
  for (int i = 0; i < sysconf_max; i++) {
    pthread_key_t key;
    rv = pthread_key_create(&key, NULL);
    if (rv == EAGAIN) {
      break;
    }
    EXPECT_EQ(0, rv);
    keys.push_back(key);
  }

  // Don't leak keys.
  for (auto key : keys) {
    EXPECT_EQ(0, pthread_key_delete(key));
  }
  keys.clear();

  // We should have eventually reached the maximum number of keys and received
  // EAGAIN.
  ASSERT_EQ(EAGAIN, rv);
}

TEST(pthread, pthread_key_delete) {
  void* expected = reinterpret_cast<void*>(1234);
  pthread_key_t key;
  ASSERT_EQ(0, pthread_key_create(&key, NULL));
  ASSERT_EQ(0, pthread_setspecific(key, expected));
  ASSERT_EQ(expected, pthread_getspecific(key));
  ASSERT_EQ(0, pthread_key_delete(key));
  // After deletion, pthread_getspecific returns NULL.
  ASSERT_EQ(NULL, pthread_getspecific(key));
  // And you can't use pthread_setspecific with the deleted key.
  ASSERT_EQ(EINVAL, pthread_setspecific(key, expected));
}

TEST(pthread, pthread_key_fork) {
  void* expected = reinterpret_cast<void*>(1234);
  pthread_key_t key;
  ASSERT_EQ(0, pthread_key_create(&key, NULL));
  ASSERT_EQ(0, pthread_setspecific(key, expected));
  ASSERT_EQ(expected, pthread_getspecific(key));

  pid_t pid = fork();
  ASSERT_NE(-1, pid) << strerror(errno);

  if (pid == 0) {
    // The surviving thread inherits all the forking thread's TLS values...
    ASSERT_EQ(expected, pthread_getspecific(key));
    _exit(99);
  }

  int status;
  ASSERT_EQ(pid, waitpid(pid, &status, 0));
  ASSERT_TRUE(WIFEXITED(status));
  ASSERT_EQ(99, WEXITSTATUS(status));

  ASSERT_EQ(expected, pthread_getspecific(key));
  ASSERT_EQ(0, pthread_key_delete(key));
}

static void* DirtyKeyFn(void* key) {
  return pthread_getspecific(*reinterpret_cast<pthread_key_t*>(key));
}

TEST(pthread, pthread_key_dirty) {
  pthread_key_t key;
  ASSERT_EQ(0, pthread_key_create(&key, NULL));

  size_t stack_size = 128 * 1024;
  void* stack = mmap(NULL, stack_size, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
  ASSERT_NE(MAP_FAILED, stack);
  memset(stack, 0xff, stack_size);

  pthread_attr_t attr;
  ASSERT_EQ(0, pthread_attr_init(&attr));
  ASSERT_EQ(0, pthread_attr_setstack(&attr, stack, stack_size));

  pthread_t t;
  ASSERT_EQ(0, pthread_create(&t, &attr, DirtyKeyFn, &key));

  void* result;
  ASSERT_EQ(0, pthread_join(t, &result));
  ASSERT_EQ(nullptr, result); // Not ~0!

  ASSERT_EQ(0, munmap(stack, stack_size));
  ASSERT_EQ(0, pthread_key_delete(key));
}

static void* IdFn(void* arg) {
  return arg;
}

static void* SleepFn(void* arg) {
  sleep(reinterpret_cast<uintptr_t>(arg));
  return NULL;
}

static void* SpinFn(void* arg) {
  volatile bool* b = reinterpret_cast<volatile bool*>(arg);
  while (!*b) {
  }
  return NULL;
}

static void* JoinFn(void* arg) {
  return reinterpret_cast<void*>(pthread_join(reinterpret_cast<pthread_t>(arg), NULL));
}

static void AssertDetached(pthread_t t, bool is_detached) {
  pthread_attr_t attr;
  ASSERT_EQ(0, pthread_getattr_np(t, &attr));
  int detach_state;
  ASSERT_EQ(0, pthread_attr_getdetachstate(&attr, &detach_state));
  pthread_attr_destroy(&attr);
  ASSERT_EQ(is_detached, (detach_state == PTHREAD_CREATE_DETACHED));
}

static void MakeDeadThread(pthread_t& t) {
  ASSERT_EQ(0, pthread_create(&t, NULL, IdFn, NULL));
  ASSERT_EQ(0, pthread_join(t, NULL));
}

TEST(pthread, pthread_create) {
  void* expected_result = reinterpret_cast<void*>(123);
  // Can we create a thread?
  pthread_t t;
  ASSERT_EQ(0, pthread_create(&t, NULL, IdFn, expected_result));
  // If we join, do we get the expected value back?
  void* result;
  ASSERT_EQ(0, pthread_join(t, &result));
  ASSERT_EQ(expected_result, result);
}

TEST(pthread, pthread_create_EAGAIN) {
  pthread_attr_t attributes;
  ASSERT_EQ(0, pthread_attr_init(&attributes));
  ASSERT_EQ(0, pthread_attr_setstacksize(&attributes, static_cast<size_t>(-1) & ~(getpagesize() - 1)));

  pthread_t t;
  ASSERT_EQ(EAGAIN, pthread_create(&t, &attributes, IdFn, NULL));
}

TEST(pthread, pthread_no_join_after_detach) {
  pthread_t t1;
  ASSERT_EQ(0, pthread_create(&t1, NULL, SleepFn, reinterpret_cast<void*>(5)));

  // After a pthread_detach...
  ASSERT_EQ(0, pthread_detach(t1));
  AssertDetached(t1, true);

  // ...pthread_join should fail.
  ASSERT_EQ(EINVAL, pthread_join(t1, NULL));
}

TEST(pthread, pthread_no_op_detach_after_join) {
  bool done = false;

  pthread_t t1;
  ASSERT_EQ(0, pthread_create(&t1, NULL, SpinFn, &done));

  // If thread 2 is already waiting to join thread 1...
  pthread_t t2;
  ASSERT_EQ(0, pthread_create(&t2, NULL, JoinFn, reinterpret_cast<void*>(t1)));

  sleep(1); // (Give t2 a chance to call pthread_join.)

  // ...a call to pthread_detach on thread 1 will "succeed" (silently fail)...
  ASSERT_EQ(0, pthread_detach(t1));
  AssertDetached(t1, false);

  done = true;

  // ...but t2's join on t1 still goes ahead (which we can tell because our join on t2 finishes).
  void* join_result;
  ASSERT_EQ(0, pthread_join(t2, &join_result));
  ASSERT_EQ(0U, reinterpret_cast<uintptr_t>(join_result));
}

TEST(pthread, pthread_join_self) {
  ASSERT_EQ(EDEADLK, pthread_join(pthread_self(), NULL));
}

struct TestBug37410 {
  pthread_t main_thread;
  pthread_mutex_t mutex;

  static void main() {
    TestBug37410 data;
    data.main_thread = pthread_self();
    ASSERT_EQ(0, pthread_mutex_init(&data.mutex, NULL));
    ASSERT_EQ(0, pthread_mutex_lock(&data.mutex));

    pthread_t t;
    ASSERT_EQ(0, pthread_create(&t, NULL, TestBug37410::thread_fn, reinterpret_cast<void*>(&data)));

    // Wait for the thread to be running...
    ASSERT_EQ(0, pthread_mutex_lock(&data.mutex));
    ASSERT_EQ(0, pthread_mutex_unlock(&data.mutex));

    // ...and exit.
    pthread_exit(NULL);
  }

 private:
  static void* thread_fn(void* arg) {
    TestBug37410* data = reinterpret_cast<TestBug37410*>(arg);

    // Let the main thread know we're running.
    pthread_mutex_unlock(&data->mutex);

    // And wait for the main thread to exit.
    pthread_join(data->main_thread, NULL);

    return NULL;
  }
};

// Even though this isn't really a death test, we have to say "DeathTest" here so gtest knows to
// run this test (which exits normally) in its own process.
TEST(pthread_DeathTest, pthread_bug_37410) {
  // http://code.google.com/p/android/issues/detail?id=37410
  ::testing::FLAGS_gtest_death_test_style = "threadsafe";
  ASSERT_EXIT(TestBug37410::main(), ::testing::ExitedWithCode(0), "");
}

static void* SignalHandlerFn(void* arg) {
  sigset_t wait_set;
  sigfillset(&wait_set);
  return reinterpret_cast<void*>(sigwait(&wait_set, reinterpret_cast<int*>(arg)));
}

TEST(pthread, pthread_sigmask) {
  // Check that SIGUSR1 isn't blocked.
  sigset_t original_set;
  sigemptyset(&original_set);
  ASSERT_EQ(0, pthread_sigmask(SIG_BLOCK, NULL, &original_set));
  ASSERT_FALSE(sigismember(&original_set, SIGUSR1));

  // Block SIGUSR1.
  sigset_t set;
  sigemptyset(&set);
  sigaddset(&set, SIGUSR1);
  ASSERT_EQ(0, pthread_sigmask(SIG_BLOCK, &set, NULL));

  // Check that SIGUSR1 is blocked.
  sigset_t final_set;
  sigemptyset(&final_set);
  ASSERT_EQ(0, pthread_sigmask(SIG_BLOCK, NULL, &final_set));
  ASSERT_TRUE(sigismember(&final_set, SIGUSR1));
  // ...and that sigprocmask agrees with pthread_sigmask.
  sigemptyset(&final_set);
  ASSERT_EQ(0, sigprocmask(SIG_BLOCK, NULL, &final_set));
  ASSERT_TRUE(sigismember(&final_set, SIGUSR1));

  // Spawn a thread that calls sigwait and tells us what it received.
  pthread_t signal_thread;
  int received_signal = -1;
  ASSERT_EQ(0, pthread_create(&signal_thread, NULL, SignalHandlerFn, &received_signal));

  // Send that thread SIGUSR1.
  pthread_kill(signal_thread, SIGUSR1);

  // See what it got.
  void* join_result;
  ASSERT_EQ(0, pthread_join(signal_thread, &join_result));
  ASSERT_EQ(SIGUSR1, received_signal);
  ASSERT_EQ(0U, reinterpret_cast<uintptr_t>(join_result));

  // Restore the original signal mask.
  ASSERT_EQ(0, pthread_sigmask(SIG_SETMASK, &original_set, NULL));
}

TEST(pthread, pthread_setname_np__too_long) {
#if defined(__BIONIC__) // Not all build servers have a new enough glibc? TODO: remove when they're on gprecise.
  ASSERT_EQ(ERANGE, pthread_setname_np(pthread_self(), "this name is far too long for linux"));
#else // __BIONIC__
  GTEST_LOG_(INFO) << "This test does nothing.\n";
#endif // __BIONIC__
}

TEST(pthread, pthread_setname_np__self) {
#if defined(__BIONIC__) // Not all build servers have a new enough glibc? TODO: remove when they're on gprecise.
  ASSERT_EQ(0, pthread_setname_np(pthread_self(), "short 1"));
#else // __BIONIC__
  GTEST_LOG_(INFO) << "This test does nothing.\n";
#endif // __BIONIC__
}

TEST(pthread, pthread_setname_np__other) {
#if defined(__BIONIC__) // Not all build servers have a new enough glibc? TODO: remove when they're on gprecise.
  // Emulator kernels don't currently support setting the name of other threads.
  char* filename = NULL;
  asprintf(&filename, "/proc/self/task/%d/comm", gettid());
  struct stat sb;
  bool has_comm = (stat(filename, &sb) != -1);
  free(filename);

  if (has_comm) {
    pthread_t t1;
    ASSERT_EQ(0, pthread_create(&t1, NULL, SleepFn, reinterpret_cast<void*>(5)));
    ASSERT_EQ(0, pthread_setname_np(t1, "short 2"));
  } else {
    fprintf(stderr, "skipping test: this kernel doesn't have /proc/self/task/tid/comm files!\n");
  }
#else // __BIONIC__
  GTEST_LOG_(INFO) << "This test does nothing.\n";
#endif // __BIONIC__
}

TEST(pthread, pthread_setname_np__no_such_thread) {
#if defined(__BIONIC__) // Not all build servers have a new enough glibc? TODO: remove when they're on gprecise.
  pthread_t dead_thread;
  MakeDeadThread(dead_thread);

  // Call pthread_setname_np after thread has already exited.
  ASSERT_EQ(ESRCH, pthread_setname_np(dead_thread, "short 3"));
#else // __BIONIC__
  GTEST_LOG_(INFO) << "This test does nothing.\n";
#endif // __BIONIC__
}

TEST(pthread, pthread_kill__0) {
  // Signal 0 just tests that the thread exists, so it's safe to call on ourselves.
  ASSERT_EQ(0, pthread_kill(pthread_self(), 0));
}

TEST(pthread, pthread_kill__invalid_signal) {
  ASSERT_EQ(EINVAL, pthread_kill(pthread_self(), -1));
}

static void pthread_kill__in_signal_handler_helper(int signal_number) {
  static int count = 0;
  ASSERT_EQ(SIGALRM, signal_number);
  if (++count == 1) {
    // Can we call pthread_kill from a signal handler?
    ASSERT_EQ(0, pthread_kill(pthread_self(), SIGALRM));
  }
}

TEST(pthread, pthread_kill__in_signal_handler) {
  ScopedSignalHandler ssh(SIGALRM, pthread_kill__in_signal_handler_helper);
  ASSERT_EQ(0, pthread_kill(pthread_self(), SIGALRM));
}

TEST(pthread, pthread_detach__no_such_thread) {
  pthread_t dead_thread;
  MakeDeadThread(dead_thread);

  ASSERT_EQ(ESRCH, pthread_detach(dead_thread));
}

TEST(pthread, pthread_detach__leak) {
  size_t initial_bytes = 0;
  // Run this loop more than once since the first loop causes some memory
  // to be allocated permenantly. Run an extra loop to help catch any subtle
  // memory leaks.
  for (size_t loop = 0; loop < 3; loop++) {
    // Set the initial bytes on the second loop since the memory in use
    // should have stabilized.
    if (loop == 1) {
      initial_bytes = mallinfo().uordblks;
    }

    pthread_attr_t attr;
    ASSERT_EQ(0, pthread_attr_init(&attr));
    ASSERT_EQ(0, pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE));

    std::vector<pthread_t> threads;
    for (size_t i = 0; i < 32; ++i) {
      pthread_t t;
      ASSERT_EQ(0, pthread_create(&t, &attr, IdFn, NULL));
      threads.push_back(t);
    }

    sleep(1);

    for (size_t i = 0; i < 32; ++i) {
      ASSERT_EQ(0, pthread_detach(threads[i])) << i;
    }
  }

  size_t final_bytes = mallinfo().uordblks;
  int leaked_bytes = (final_bytes - initial_bytes);

  // User code (like this test) doesn't know how large pthread_internal_t is.
  // We can be pretty sure it's more than 128 bytes.
  ASSERT_LT(leaked_bytes, 32 /*threads*/ * 128 /*bytes*/);
}

TEST(pthread, pthread_getcpuclockid__clock_gettime) {
  pthread_t t;
  ASSERT_EQ(0, pthread_create(&t, NULL, SleepFn, reinterpret_cast<void*>(5)));

  clockid_t c;
  ASSERT_EQ(0, pthread_getcpuclockid(t, &c));
  timespec ts;
  ASSERT_EQ(0, clock_gettime(c, &ts));
}

TEST(pthread, pthread_getcpuclockid__no_such_thread) {
  pthread_t dead_thread;
  MakeDeadThread(dead_thread);

  clockid_t c;
  ASSERT_EQ(ESRCH, pthread_getcpuclockid(dead_thread, &c));
}

TEST(pthread, pthread_getschedparam__no_such_thread) {
  pthread_t dead_thread;
  MakeDeadThread(dead_thread);

  int policy;
  sched_param param;
  ASSERT_EQ(ESRCH, pthread_getschedparam(dead_thread, &policy, &param));
}

TEST(pthread, pthread_setschedparam__no_such_thread) {
  pthread_t dead_thread;
  MakeDeadThread(dead_thread);

  int policy = 0;
  sched_param param;
  ASSERT_EQ(ESRCH, pthread_setschedparam(dead_thread, policy, &param));
}

TEST(pthread, pthread_join__no_such_thread) {
  pthread_t dead_thread;
  MakeDeadThread(dead_thread);

  ASSERT_EQ(ESRCH, pthread_join(dead_thread, NULL));
}

TEST(pthread, pthread_kill__no_such_thread) {
  pthread_t dead_thread;
  MakeDeadThread(dead_thread);

  ASSERT_EQ(ESRCH, pthread_kill(dead_thread, 0));
}

TEST(pthread, pthread_join__multijoin) {
  bool done = false;

  pthread_t t1;
  ASSERT_EQ(0, pthread_create(&t1, NULL, SpinFn, &done));

  pthread_t t2;
  ASSERT_EQ(0, pthread_create(&t2, NULL, JoinFn, reinterpret_cast<void*>(t1)));

  sleep(1); // (Give t2 a chance to call pthread_join.)

  // Multiple joins to the same thread should fail.
  ASSERT_EQ(EINVAL, pthread_join(t1, NULL));

  done = true;

  // ...but t2's join on t1 still goes ahead (which we can tell because our join on t2 finishes).
  void* join_result;
  ASSERT_EQ(0, pthread_join(t2, &join_result));
  ASSERT_EQ(0U, reinterpret_cast<uintptr_t>(join_result));
}

TEST(pthread, pthread_join__race) {
  // http://b/11693195 --- pthread_join could return before the thread had actually exited.
  // If the joiner unmapped the thread's stack, that could lead to SIGSEGV in the thread.
  for (size_t i = 0; i < 1024; ++i) {
    size_t stack_size = 64*1024;
    void* stack = mmap(NULL, stack_size, PROT_READ|PROT_WRITE, MAP_ANON|MAP_PRIVATE, -1, 0);

    pthread_attr_t a;
    pthread_attr_init(&a);
    pthread_attr_setstack(&a, stack, stack_size);

    pthread_t t;
    ASSERT_EQ(0, pthread_create(&t, &a, IdFn, NULL));
    ASSERT_EQ(0, pthread_join(t, NULL));
    ASSERT_EQ(0, munmap(stack, stack_size));
  }
}

static void* GetActualGuardSizeFn(void* arg) {
  pthread_attr_t attributes;
  pthread_getattr_np(pthread_self(), &attributes);
  pthread_attr_getguardsize(&attributes, reinterpret_cast<size_t*>(arg));
  return NULL;
}

static size_t GetActualGuardSize(const pthread_attr_t& attributes) {
  size_t result;
  pthread_t t;
  pthread_create(&t, &attributes, GetActualGuardSizeFn, &result);
  pthread_join(t, NULL);
  return result;
}

static void* GetActualStackSizeFn(void* arg) {
  pthread_attr_t attributes;
  pthread_getattr_np(pthread_self(), &attributes);
  pthread_attr_getstacksize(&attributes, reinterpret_cast<size_t*>(arg));
  return NULL;
}

static size_t GetActualStackSize(const pthread_attr_t& attributes) {
  size_t result;
  pthread_t t;
  pthread_create(&t, &attributes, GetActualStackSizeFn, &result);
  pthread_join(t, NULL);
  return result;
}

TEST(pthread, pthread_attr_setguardsize) {
  pthread_attr_t attributes;
  ASSERT_EQ(0, pthread_attr_init(&attributes));

  // Get the default guard size.
  size_t default_guard_size;
  ASSERT_EQ(0, pthread_attr_getguardsize(&attributes, &default_guard_size));

  // No such thing as too small: will be rounded up to one page by pthread_create.
  ASSERT_EQ(0, pthread_attr_setguardsize(&attributes, 128));
  size_t guard_size;
  ASSERT_EQ(0, pthread_attr_getguardsize(&attributes, &guard_size));
  ASSERT_EQ(128U, guard_size);
  ASSERT_EQ(4096U, GetActualGuardSize(attributes));

  // Large enough and a multiple of the page size.
  ASSERT_EQ(0, pthread_attr_setguardsize(&attributes, 32*1024));
  ASSERT_EQ(0, pthread_attr_getguardsize(&attributes, &guard_size));
  ASSERT_EQ(32*1024U, guard_size);

  // Large enough but not a multiple of the page size; will be rounded up by pthread_create.
  ASSERT_EQ(0, pthread_attr_setguardsize(&attributes, 32*1024 + 1));
  ASSERT_EQ(0, pthread_attr_getguardsize(&attributes, &guard_size));
  ASSERT_EQ(32*1024U + 1, guard_size);
}

TEST(pthread, pthread_attr_setstacksize) {
  pthread_attr_t attributes;
  ASSERT_EQ(0, pthread_attr_init(&attributes));

  // Get the default stack size.
  size_t default_stack_size;
  ASSERT_EQ(0, pthread_attr_getstacksize(&attributes, &default_stack_size));

  // Too small.
  ASSERT_EQ(EINVAL, pthread_attr_setstacksize(&attributes, 128));
  size_t stack_size;
  ASSERT_EQ(0, pthread_attr_getstacksize(&attributes, &stack_size));
  ASSERT_EQ(default_stack_size, stack_size);
  ASSERT_GE(GetActualStackSize(attributes), default_stack_size);

  // Large enough and a multiple of the page size.
  ASSERT_EQ(0, pthread_attr_setstacksize(&attributes, 32*1024));
  ASSERT_EQ(0, pthread_attr_getstacksize(&attributes, &stack_size));
  ASSERT_EQ(32*1024U, stack_size);
  ASSERT_EQ(GetActualStackSize(attributes), 32*1024U);

  // Large enough but not a multiple of the page size; will be rounded up by pthread_create.
  ASSERT_EQ(0, pthread_attr_setstacksize(&attributes, 32*1024 + 1));
  ASSERT_EQ(0, pthread_attr_getstacksize(&attributes, &stack_size));
  ASSERT_EQ(32*1024U + 1, stack_size);
#if defined(__BIONIC__)
  // Bionic rounds up, which is what POSIX allows.
  ASSERT_EQ(GetActualStackSize(attributes), (32 + 4)*1024U);
#else // __BIONIC__
  // glibc rounds down, in violation of POSIX. They document this in their BUGS section.
  ASSERT_EQ(GetActualStackSize(attributes), 32*1024U);
#endif // __BIONIC__
}

TEST(pthread, pthread_rwlock_smoke) {
  pthread_rwlock_t l;
  ASSERT_EQ(0, pthread_rwlock_init(&l, NULL));

  // Single read lock
  ASSERT_EQ(0, pthread_rwlock_rdlock(&l));
  ASSERT_EQ(0, pthread_rwlock_unlock(&l));

  // Multiple read lock
  ASSERT_EQ(0, pthread_rwlock_rdlock(&l));
  ASSERT_EQ(0, pthread_rwlock_rdlock(&l));
  ASSERT_EQ(0, pthread_rwlock_unlock(&l));
  ASSERT_EQ(0, pthread_rwlock_unlock(&l));

  // Write lock
  ASSERT_EQ(0, pthread_rwlock_wrlock(&l));
  ASSERT_EQ(0, pthread_rwlock_unlock(&l));

  // Try writer lock
  ASSERT_EQ(0, pthread_rwlock_trywrlock(&l));
  ASSERT_EQ(EBUSY, pthread_rwlock_trywrlock(&l));
  ASSERT_EQ(EBUSY, pthread_rwlock_tryrdlock(&l));
  ASSERT_EQ(0, pthread_rwlock_unlock(&l));

  // Try reader lock
  ASSERT_EQ(0, pthread_rwlock_tryrdlock(&l));
  ASSERT_EQ(0, pthread_rwlock_tryrdlock(&l));
  ASSERT_EQ(EBUSY, pthread_rwlock_trywrlock(&l));
  ASSERT_EQ(0, pthread_rwlock_unlock(&l));
  ASSERT_EQ(0, pthread_rwlock_unlock(&l));

  // Try writer lock after unlock
  ASSERT_EQ(0, pthread_rwlock_wrlock(&l));
  ASSERT_EQ(0, pthread_rwlock_unlock(&l));

#ifdef __BIONIC__
  // EDEADLK in "read after write"
  ASSERT_EQ(0, pthread_rwlock_wrlock(&l));
  ASSERT_EQ(EDEADLK, pthread_rwlock_rdlock(&l));
  ASSERT_EQ(0, pthread_rwlock_unlock(&l));

  // EDEADLK in "write after write"
  ASSERT_EQ(0, pthread_rwlock_wrlock(&l));
  ASSERT_EQ(EDEADLK, pthread_rwlock_wrlock(&l));
  ASSERT_EQ(0, pthread_rwlock_unlock(&l));
#endif

  ASSERT_EQ(0, pthread_rwlock_destroy(&l));
}

static int g_once_fn_call_count = 0;
static void OnceFn() {
  ++g_once_fn_call_count;
}

TEST(pthread, pthread_once_smoke) {
  pthread_once_t once_control = PTHREAD_ONCE_INIT;
  ASSERT_EQ(0, pthread_once(&once_control, OnceFn));
  ASSERT_EQ(0, pthread_once(&once_control, OnceFn));
  ASSERT_EQ(1, g_once_fn_call_count);
}

static std::string pthread_once_1934122_result = "";

static void Routine2() {
  pthread_once_1934122_result += "2";
}

static void Routine1() {
  pthread_once_t once_control_2 = PTHREAD_ONCE_INIT;
  pthread_once_1934122_result += "1";
  pthread_once(&once_control_2, &Routine2);
}

TEST(pthread, pthread_once_1934122) {
  // Very old versions of Android couldn't call pthread_once from a
  // pthread_once init routine. http://b/1934122.
  pthread_once_t once_control_1 = PTHREAD_ONCE_INIT;
  ASSERT_EQ(0, pthread_once(&once_control_1, &Routine1));
  ASSERT_EQ("12", pthread_once_1934122_result);
}

static int g_atfork_prepare_calls = 0;
static void AtForkPrepare1() { g_atfork_prepare_calls = (g_atfork_prepare_calls << 4) | 1; }
static void AtForkPrepare2() { g_atfork_prepare_calls = (g_atfork_prepare_calls << 4) | 2; }
static int g_atfork_parent_calls = 0;
static void AtForkParent1() { g_atfork_parent_calls = (g_atfork_parent_calls << 4) | 1; }
static void AtForkParent2() { g_atfork_parent_calls = (g_atfork_parent_calls << 4) | 2; }
static int g_atfork_child_calls = 0;
static void AtForkChild1() { g_atfork_child_calls = (g_atfork_child_calls << 4) | 1; }
static void AtForkChild2() { g_atfork_child_calls = (g_atfork_child_calls << 4) | 2; }

TEST(pthread, pthread_atfork) {
  ASSERT_EQ(0, pthread_atfork(AtForkPrepare1, AtForkParent1, AtForkChild1));
  ASSERT_EQ(0, pthread_atfork(AtForkPrepare2, AtForkParent2, AtForkChild2));

  int pid = fork();
  ASSERT_NE(-1, pid) << strerror(errno);

  // Child and parent calls are made in the order they were registered.
  if (pid == 0) {
    ASSERT_EQ(0x12, g_atfork_child_calls);
    _exit(0);
  }
  ASSERT_EQ(0x12, g_atfork_parent_calls);

  // Prepare calls are made in the reverse order.
  ASSERT_EQ(0x21, g_atfork_prepare_calls);
}

TEST(pthread, pthread_attr_getscope) {
  pthread_attr_t attr;
  ASSERT_EQ(0, pthread_attr_init(&attr));

  int scope;
  ASSERT_EQ(0, pthread_attr_getscope(&attr, &scope));
  ASSERT_EQ(PTHREAD_SCOPE_SYSTEM, scope);
}

TEST(pthread, pthread_condattr_init) {
  pthread_condattr_t attr;
  pthread_condattr_init(&attr);

  clockid_t clock;
  ASSERT_EQ(0, pthread_condattr_getclock(&attr, &clock));
  ASSERT_EQ(CLOCK_REALTIME, clock);

  int pshared;
  ASSERT_EQ(0, pthread_condattr_getpshared(&attr, &pshared));
  ASSERT_EQ(PTHREAD_PROCESS_PRIVATE, pshared);
}

TEST(pthread, pthread_condattr_setclock) {
  pthread_condattr_t attr;
  pthread_condattr_init(&attr);

  ASSERT_EQ(0, pthread_condattr_setclock(&attr, CLOCK_REALTIME));
  clockid_t clock;
  ASSERT_EQ(0, pthread_condattr_getclock(&attr, &clock));
  ASSERT_EQ(CLOCK_REALTIME, clock);

  ASSERT_EQ(0, pthread_condattr_setclock(&attr, CLOCK_MONOTONIC));
  ASSERT_EQ(0, pthread_condattr_getclock(&attr, &clock));
  ASSERT_EQ(CLOCK_MONOTONIC, clock);

  ASSERT_EQ(EINVAL, pthread_condattr_setclock(&attr, CLOCK_PROCESS_CPUTIME_ID));
}

TEST(pthread, pthread_cond_broadcast__preserves_condattr_flags) {
#if defined(__BIONIC__) // This tests a bionic implementation detail.
  pthread_condattr_t attr;
  pthread_condattr_init(&attr);

  ASSERT_EQ(0, pthread_condattr_setclock(&attr, CLOCK_MONOTONIC));
  ASSERT_EQ(0, pthread_condattr_setpshared(&attr, PTHREAD_PROCESS_SHARED));

  pthread_cond_t cond_var;
  ASSERT_EQ(0, pthread_cond_init(&cond_var, &attr));

  ASSERT_EQ(0, pthread_cond_signal(&cond_var));
  ASSERT_EQ(0, pthread_cond_broadcast(&cond_var));

  attr = static_cast<pthread_condattr_t>(cond_var.value);
  clockid_t clock;
  ASSERT_EQ(0, pthread_condattr_getclock(&attr, &clock));
  ASSERT_EQ(CLOCK_MONOTONIC, clock);
  int pshared;
  ASSERT_EQ(0, pthread_condattr_getpshared(&attr, &pshared));
  ASSERT_EQ(PTHREAD_PROCESS_SHARED, pshared);
#else // __BIONIC__
  GTEST_LOG_(INFO) << "This test does nothing.\n";
#endif // __BIONIC__
}

TEST(pthread, pthread_mutex_timedlock) {
  pthread_mutex_t m;
  ASSERT_EQ(0, pthread_mutex_init(&m, NULL));

  // If the mutex is already locked, pthread_mutex_timedlock should time out.
  ASSERT_EQ(0, pthread_mutex_lock(&m));

  timespec ts;
  ASSERT_EQ(0, clock_gettime(CLOCK_REALTIME, &ts));
  ts.tv_nsec += 1;
  ASSERT_EQ(ETIMEDOUT, pthread_mutex_timedlock(&m, &ts));

  // If the mutex is unlocked, pthread_mutex_timedlock should succeed.
  ASSERT_EQ(0, pthread_mutex_unlock(&m));

  ASSERT_EQ(0, clock_gettime(CLOCK_REALTIME, &ts));
  ts.tv_nsec += 1;
  ASSERT_EQ(0, pthread_mutex_timedlock(&m, &ts));

  ASSERT_EQ(0, pthread_mutex_unlock(&m));
  ASSERT_EQ(0, pthread_mutex_destroy(&m));
}

TEST(pthread, pthread_attr_getstack__main_thread) {
  // This test is only meaningful for the main thread, so make sure we're running on it!
  ASSERT_EQ(getpid(), syscall(__NR_gettid));

  // Get the main thread's attributes.
  pthread_attr_t attributes;
  ASSERT_EQ(0, pthread_getattr_np(pthread_self(), &attributes));

  // Check that we correctly report that the main thread has no guard page.
  size_t guard_size;
  ASSERT_EQ(0, pthread_attr_getguardsize(&attributes, &guard_size));
  ASSERT_EQ(0U, guard_size); // The main thread has no guard page.

  // Get the stack base and the stack size (both ways).
  void* stack_base;
  size_t stack_size;
  ASSERT_EQ(0, pthread_attr_getstack(&attributes, &stack_base, &stack_size));
  size_t stack_size2;
  ASSERT_EQ(0, pthread_attr_getstacksize(&attributes, &stack_size2));

  // The two methods of asking for the stack size should agree.
  EXPECT_EQ(stack_size, stack_size2);

  // What does /proc/self/maps' [stack] line say?
  void* maps_stack_hi = NULL;
  FILE* fp = fopen("/proc/self/maps", "r");
  ASSERT_TRUE(fp != NULL);
  char line[BUFSIZ];
  while (fgets(line, sizeof(line), fp) != NULL) {
    uintptr_t lo, hi;
    char name[10];
    sscanf(line, "%" PRIxPTR "-%" PRIxPTR " %*4s %*x %*x:%*x %*d %10s", &lo, &hi, name);
    if (strcmp(name, "[stack]") == 0) {
      maps_stack_hi = reinterpret_cast<void*>(hi);
      break;
    }
  }
  fclose(fp);

  // The stack size should correspond to RLIMIT_STACK.
  rlimit rl;
  ASSERT_EQ(0, getrlimit(RLIMIT_STACK, &rl));
  uint64_t original_rlim_cur = rl.rlim_cur;
#if defined(__BIONIC__)
  if (rl.rlim_cur == RLIM_INFINITY) {
    rl.rlim_cur = 8 * 1024 * 1024; // Bionic reports unlimited stacks as 8MiB.
  }
#endif
  EXPECT_EQ(rl.rlim_cur, stack_size);

  auto guard = make_scope_guard([&rl, original_rlim_cur]() {
    rl.rlim_cur = original_rlim_cur;
    ASSERT_EQ(0, setrlimit(RLIMIT_STACK, &rl));
  });

  // The high address of the /proc/self/maps [stack] region should equal stack_base + stack_size.
  // Remember that the stack grows down (and is mapped in on demand), so the low address of the
  // region isn't very interesting.
  EXPECT_EQ(maps_stack_hi, reinterpret_cast<uint8_t*>(stack_base) + stack_size);

  //
  // What if RLIMIT_STACK is smaller than the stack's current extent?
  //
  rl.rlim_cur = rl.rlim_max = 1024; // 1KiB. We know the stack must be at least a page already.
  rl.rlim_max = RLIM_INFINITY;
  ASSERT_EQ(0, setrlimit(RLIMIT_STACK, &rl));

  ASSERT_EQ(0, pthread_getattr_np(pthread_self(), &attributes));
  ASSERT_EQ(0, pthread_attr_getstack(&attributes, &stack_base, &stack_size));
  ASSERT_EQ(0, pthread_attr_getstacksize(&attributes, &stack_size2));

  EXPECT_EQ(stack_size, stack_size2);
  ASSERT_EQ(1024U, stack_size);

  //
  // What if RLIMIT_STACK isn't a whole number of pages?
  //
  rl.rlim_cur = rl.rlim_max = 6666; // Not a whole number of pages.
  rl.rlim_max = RLIM_INFINITY;
  ASSERT_EQ(0, setrlimit(RLIMIT_STACK, &rl));

  ASSERT_EQ(0, pthread_getattr_np(pthread_self(), &attributes));
  ASSERT_EQ(0, pthread_attr_getstack(&attributes, &stack_base, &stack_size));
  ASSERT_EQ(0, pthread_attr_getstacksize(&attributes, &stack_size2));

  EXPECT_EQ(stack_size, stack_size2);
  ASSERT_EQ(6666U, stack_size);
}

#if defined(__BIONIC__)
static void* pthread_gettid_np_helper(void* arg) {
  *reinterpret_cast<pid_t*>(arg) = gettid();
  return NULL;
}
#endif

TEST(pthread, pthread_gettid_np) {
#if defined(__BIONIC__)
  ASSERT_EQ(gettid(), pthread_gettid_np(pthread_self()));

  pid_t t_gettid_result;
  pthread_t t;
  pthread_create(&t, NULL, pthread_gettid_np_helper, &t_gettid_result);

  pid_t t_pthread_gettid_np_result = pthread_gettid_np(t);

  pthread_join(t, NULL);

  ASSERT_EQ(t_gettid_result, t_pthread_gettid_np_result);
#else
  GTEST_LOG_(INFO) << "This test does nothing.\n";
#endif
}

static size_t cleanup_counter = 0;

static void AbortCleanupRoutine(void*) {
  abort();
}

static void CountCleanupRoutine(void*) {
  ++cleanup_counter;
}

static void PthreadCleanupTester() {
  pthread_cleanup_push(CountCleanupRoutine, NULL);
  pthread_cleanup_push(CountCleanupRoutine, NULL);
  pthread_cleanup_push(AbortCleanupRoutine, NULL);

  pthread_cleanup_pop(0); // Pop the abort without executing it.
  pthread_cleanup_pop(1); // Pop one count while executing it.
  ASSERT_EQ(1U, cleanup_counter);
  // Exit while the other count is still on the cleanup stack.
  pthread_exit(NULL);

  // Calls to pthread_cleanup_pop/pthread_cleanup_push must always be balanced.
  pthread_cleanup_pop(0);
}

static void* PthreadCleanupStartRoutine(void*) {
  PthreadCleanupTester();
  return NULL;
}

TEST(pthread, pthread_cleanup_push__pthread_cleanup_pop) {
  pthread_t t;
  ASSERT_EQ(0, pthread_create(&t, NULL, PthreadCleanupStartRoutine, NULL));
  pthread_join(t, NULL);
  ASSERT_EQ(2U, cleanup_counter);
}

TEST(pthread, PTHREAD_MUTEX_DEFAULT_is_PTHREAD_MUTEX_NORMAL) {
  ASSERT_EQ(PTHREAD_MUTEX_NORMAL, PTHREAD_MUTEX_DEFAULT);
}

TEST(pthread, pthread_mutexattr_gettype) {
  pthread_mutexattr_t attr;
  ASSERT_EQ(0, pthread_mutexattr_init(&attr));

  int attr_type;

  ASSERT_EQ(0, pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_NORMAL));
  ASSERT_EQ(0, pthread_mutexattr_gettype(&attr, &attr_type));
  ASSERT_EQ(PTHREAD_MUTEX_NORMAL, attr_type);

  ASSERT_EQ(0, pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_ERRORCHECK));
  ASSERT_EQ(0, pthread_mutexattr_gettype(&attr, &attr_type));
  ASSERT_EQ(PTHREAD_MUTEX_ERRORCHECK, attr_type);

  ASSERT_EQ(0, pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE));
  ASSERT_EQ(0, pthread_mutexattr_gettype(&attr, &attr_type));
  ASSERT_EQ(PTHREAD_MUTEX_RECURSIVE, attr_type);
}

TEST(pthread, pthread_mutex_lock_NORMAL) {
  pthread_mutexattr_t attr;
  ASSERT_EQ(0, pthread_mutexattr_init(&attr));
  ASSERT_EQ(0, pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_NORMAL));

  pthread_mutex_t lock;
  ASSERT_EQ(0, pthread_mutex_init(&lock, &attr));

  ASSERT_EQ(0, pthread_mutex_lock(&lock));
  ASSERT_EQ(0, pthread_mutex_unlock(&lock));
  ASSERT_EQ(0, pthread_mutex_destroy(&lock));
}

TEST(pthread, pthread_mutex_lock_ERRORCHECK) {
  pthread_mutexattr_t attr;
  ASSERT_EQ(0, pthread_mutexattr_init(&attr));
  ASSERT_EQ(0, pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_ERRORCHECK));

  pthread_mutex_t lock;
  ASSERT_EQ(0, pthread_mutex_init(&lock, &attr));

  ASSERT_EQ(0, pthread_mutex_lock(&lock));
  ASSERT_EQ(EDEADLK, pthread_mutex_lock(&lock));
  ASSERT_EQ(0, pthread_mutex_unlock(&lock));
  ASSERT_EQ(0, pthread_mutex_trylock(&lock));
  ASSERT_EQ(EBUSY, pthread_mutex_trylock(&lock));
  ASSERT_EQ(0, pthread_mutex_unlock(&lock));
  ASSERT_EQ(EPERM, pthread_mutex_unlock(&lock));
  ASSERT_EQ(0, pthread_mutex_destroy(&lock));
}

TEST(pthread, pthread_mutex_lock_RECURSIVE) {
  pthread_mutexattr_t attr;
  ASSERT_EQ(0, pthread_mutexattr_init(&attr));
  ASSERT_EQ(0, pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE));

  pthread_mutex_t lock;
  ASSERT_EQ(0, pthread_mutex_init(&lock, &attr));

  ASSERT_EQ(0, pthread_mutex_lock(&lock));
  ASSERT_EQ(0, pthread_mutex_lock(&lock));
  ASSERT_EQ(0, pthread_mutex_unlock(&lock));
  ASSERT_EQ(0, pthread_mutex_unlock(&lock));
  ASSERT_EQ(0, pthread_mutex_trylock(&lock));
  ASSERT_EQ(0, pthread_mutex_unlock(&lock));
  ASSERT_EQ(EPERM, pthread_mutex_unlock(&lock));
  ASSERT_EQ(0, pthread_mutex_destroy(&lock));
}