/* Copyright (c) 2012, Linaro Limited
   All rights reserved.

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions are met:
       * Redistributions of source code must retain the above copyright
         notice, this list of conditions and the following disclaimer.
       * Redistributions in binary form must reproduce the above copyright
         notice, this list of conditions and the following disclaimer in the
         documentation and/or other materials provided with the distribution.
       * Neither the name of the Linaro nor the
         names of its contributors may be used to endorse or promote products
         derived from this software without specific prior written permission.

   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
   HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

/* Assumptions:
 *
 * ARMv8-a, AArch64
 * Unaligned accesses
 *
 */

#include <private/bionic_asm.h>

#define dstin	x0
#define src	x1
#define count	x2
#define tmp1	x3
#define tmp1w	w3
#define tmp2	x4
#define tmp2w	w4
#define tmp3	x5
#define tmp3w	w5
#define dst	x6

#define A_l	x7
#define A_h	x8
#define B_l	x9
#define B_h	x10
#define C_l	x11
#define C_h	x12
#define D_l	x13
#define D_h	x14

#define QA_l q0
#define QA_h q1
#define QB_l q2
#define QB_h q3

ENTRY(memcpy)

	mov	dst, dstin
	cmp	count, #64
	b.ge	.Lcpy_not_short
	cmp	count, #15
	b.le	.Ltail15tiny

	/* Deal with small copies quickly by dropping straight into the
	 * exit block.  */
.Ltail63:
	/* Copy up to 48 bytes of data.  At this point we only need the
	 * bottom 6 bits of count to be accurate.  */
	ands	tmp1, count, #0x30
	b.eq	.Ltail15
	add	dst, dst, tmp1
	add	src, src, tmp1
	cmp	tmp1w, #0x20
	b.eq	1f
	b.lt	2f
	ldp	A_l, A_h, [src, #-48]
	stp	A_l, A_h, [dst, #-48]
1:
	ldp	A_l, A_h, [src, #-32]
	stp	A_l, A_h, [dst, #-32]
2:
	ldp	A_l, A_h, [src, #-16]
	stp	A_l, A_h, [dst, #-16]

.Ltail15:
	ands	count, count, #15
	beq	1f
	add	src, src, count
	ldp	A_l, A_h, [src, #-16]
	add	dst, dst, count
	stp	A_l, A_h, [dst, #-16]
1:
	ret

.Ltail15tiny:
	/* Copy up to 15 bytes of data.  Does not assume additional data
	   being copied.  */
	tbz	count, #3, 1f
	ldr	tmp1, [src], #8
	str	tmp1, [dst], #8
1:
	tbz	count, #2, 1f
	ldr	tmp1w, [src], #4
	str	tmp1w, [dst], #4
1:
	tbz	count, #1, 1f
	ldrh	tmp1w, [src], #2
	strh	tmp1w, [dst], #2
1:
	tbz	count, #0, 1f
	ldrb	tmp1w, [src]
	strb	tmp1w, [dst]
1:
	ret

.Lcpy_not_short:
	/* We don't much care about the alignment of DST, but we want SRC
	 * to be 128-bit (16 byte) aligned so that we don't cross cache line
	 * boundaries on both loads and stores.  */
	neg	tmp2, src
	ands	tmp2, tmp2, #15		/* Bytes to reach alignment.  */
	b.eq	2f
	sub	count, count, tmp2
	/* Copy more data than needed; it's faster than jumping
	 * around copying sub-Quadword quantities.  We know that
	 * it can't overrun.  */
	ldp	A_l, A_h, [src]
	add	src, src, tmp2
	stp	A_l, A_h, [dst]
	add	dst, dst, tmp2
	/* There may be less than 63 bytes to go now.  */
	cmp	count, #63
	b.le	.Ltail63
2:
	subs	count, count, #128
	b.ge	.Lcpy_body_large
	/* Less than 128 bytes to copy, so handle 64 here and then jump
	 * to the tail.  */
	ldp QA_l, QA_h, [src]
	ldp QB_l, QB_h, [src, #32]
	stp QA_l, QA_h, [dst]
	stp QB_l, QB_h, [dst, #32]
	tst	count, #0x3f
	add	src, src, #64
	add	dst, dst, #64
	b.ne	.Ltail63
	ret

	/* Critical loop.  Start at a new cache line boundary.  Assuming
	 * 64 bytes per line this ensures the entire loop is in one line.  */
	.p2align 6
.Lcpy_body_large:
	/* There are at least 128 bytes to copy.  */
	ldp QA_l, QA_h, [src, #0]
	sub	dst, dst, #32		/* Pre-bias.  */
	ldp QB_l, QB_h, [src, #32]!	/* src += 64 - Pre-bias.  */
1:
	stp QA_l, QA_h, [dst, #32]
	ldp QA_l, QA_h, [src, #32]
	stp QB_l, QB_h, [dst, #64]!
	ldp QB_l, QB_h, [src, #64]!

	subs	count, count, #64
	b.ge	1b

	stp QA_l, QA_h, [dst, #32]
	stp QB_l, QB_h, [dst, #64]
	add	src, src, #32
	add	dst, dst, #64 + 32
	tst	count, #0x3f
	b.ne	.Ltail63
	ret
END(memcpy)