/*
 * Copyright (C) 2012 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "asm_support_arm.S"

#define MANAGED_ARGS_R4_LR_SAVE_SIZE /*s0-s15*/ 16 * 4 + /*r0-r3*/ 4 * 4 + /*r4*/ 4 + /*lr*/ 4

// Note: R4 is saved for stack alignment.
.macro SAVE_MANAGED_ARGS_R4_LR_INCREASE_FRAME
    // Save GPR args r0-r3 and return address. Also save r4 for stack alignment.
    push   {r0-r4, lr}
    .cfi_adjust_cfa_offset 24
    .cfi_rel_offset lr, 20
    // Save FPR args.
    vpush  {s0-s15}
    .cfi_adjust_cfa_offset 64
.endm

.macro RESTORE_MANAGED_ARGS_R4_AND_RETURN restore_cfa
    // Restore FPR args.
    vpop   {s0-s15}
    .cfi_adjust_cfa_offset -64
    // Restore GPR args and r4 and return.
    pop    {r0-r4, pc}
    .if \restore_cfa
        .cfi_adjust_cfa_offset 64
    .endif
.endm

.macro JNI_SAVE_MANAGED_ARGS_TRAMPOLINE name, cxx_name, arg1 = "none"
    .extern \cxx_name
ENTRY \name
    // Note: Managed callee-save registers have been saved by the JNI stub.
    // Save managed args, r4 (for stack alignment) and LR.
    SAVE_MANAGED_ARGS_R4_LR_INCREASE_FRAME
    // Call `cxx_name()`.
    .ifnc \arg1, none
        mov r0, \arg1                     @ Pass arg1.
    .endif
    bl    \cxx_name                       @ Call cxx_name(...).
    // Restore args and R4 and return.
    RESTORE_MANAGED_ARGS_R4_AND_RETURN /*restore_cfa*/ 0
END \name
.endm

    /*
     * Jni dlsym lookup stub.
     */
    .extern artFindNativeMethod
    .extern artFindNativeMethodRunnable
ENTRY art_jni_dlsym_lookup_stub
    push   {r0, r1, r2, r3, lr}           @ spill regs
    .cfi_adjust_cfa_offset 20
    .cfi_rel_offset lr, 16
    sub    sp, #12                        @ pad stack pointer to align frame
    .cfi_adjust_cfa_offset 12

    mov    r0, rSELF                      @ pass Thread::Current()
    // Call artFindNativeMethod() for normal native and artFindNativeMethodRunnable()
    // for @FastNative or @CriticalNative.
    ldr    ip, [r0, #THREAD_TOP_QUICK_FRAME_OFFSET]   // uintptr_t tagged_quick_frame
    bic    ip, #1                                     // ArtMethod** sp
    ldr    ip, [ip]                                   // ArtMethod* method
    ldr    ip, [ip, #ART_METHOD_ACCESS_FLAGS_OFFSET]  // uint32_t access_flags
    tst    ip, #(ACCESS_FLAGS_METHOD_IS_FAST_NATIVE | ACCESS_FLAGS_METHOD_IS_CRITICAL_NATIVE)
    bne    .Llookup_stub_fast_or_critical_native
    blx    artFindNativeMethod
    b      .Llookup_stub_continue
.Llookup_stub_fast_or_critical_native:
    blx    artFindNativeMethodRunnable
.Llookup_stub_continue:
    mov    r12, r0                        @ save result in r12

    add    sp, #12                        @ restore stack pointer
    .cfi_adjust_cfa_offset -12
    cbz    r0, 1f                         @ is method code null?
    pop    {r0, r1, r2, r3, lr}           @ restore regs
    .cfi_adjust_cfa_offset -20
    .cfi_restore lr
    bx     r12                            @ if non-null, tail call to method's code
1:
    pop    {r0, r1, r2, r3, pc}           @ restore regs and return to caller to handle exception
END art_jni_dlsym_lookup_stub

    /*
     * Jni dlsym lookup stub for @CriticalNative.
     */
ENTRY art_jni_dlsym_lookup_critical_stub
    // The hidden arg holding the tagged method (bit 0 set means GenericJNI) is r4.
    // For Generic JNI we already have a managed frame, so we reuse the art_jni_dlsym_lookup_stub.
    tst    r4, #1
    bne art_jni_dlsym_lookup_stub

    // Reserve space for a SaveRefsAndArgs managed frame, either for the actual runtime
    // method or for a GenericJNI frame which is similar but has a native method and a tag.
    // Do this eagerly, so that we can use these registers as temps without the need to
    // save and restore them multiple times.
    INCREASE_FRAME FRAME_SIZE_SAVE_REFS_AND_ARGS

    // Save args, the hidden arg and caller PC. No CFI needed for args and the hidden arg.
    push   {r0, r1, r2, r3, r4, lr}
    .cfi_adjust_cfa_offset 24
    .cfi_rel_offset lr, 20

    // Call artCriticalNativeFrameSize(method, caller_pc)
    mov    r0, r4  // r0 := method (from hidden arg)
    mov    r1, lr  // r1 := caller_pc
    bl     artCriticalNativeFrameSize

    // Prepare the return address for managed stack walk of the SaveRefsAndArgs frame.
    // If we're coming from JNI stub with tail call, it is LR. If we're coming from
    // JNI stub that saved the return address, it will be the last value we copy below.
    // If we're coming directly from compiled code, it is LR, set further down.
    ldr    lr, [sp, #20]

    // Move the stack args if any.
    add    r4, sp, #24
    cbz    r0, .Lcritical_skip_copy_args
.Lcritical_copy_args_loop:
    ldrd   ip, lr, [r4, #FRAME_SIZE_SAVE_REFS_AND_ARGS]
    subs   r0, r0, #8
    strd   ip, lr, [r4], #8
    bne    .Lcritical_copy_args_loop
.Lcritical_skip_copy_args:
    // The managed frame address is now in R4. This is conveniently a callee-save in native ABI.

    // Restore args.
    pop    {r0, r1, r2, r3}
    .cfi_adjust_cfa_offset -16

    // Spill registers for the SaveRefsAndArgs frame above the stack args.
    // Note that the runtime shall not examine the args here, otherwise we would have to
    // move them in registers and stack to account for the difference between managed and
    // native ABIs.
    add    ip, r4, #FRAME_SIZE_SAVE_REFS_AND_ARGS - 40
    stmia  ip, {r1-r3, r5-r8, r10-r11, lr}  // LR: Save return address for tail call from JNI stub.
    // (If there were any stack args, we're storing the value that's already there.
    // For direct calls from compiled managed code, we shall overwrite this below.)
    // Skip args r1-r3.
    CFI_EXPRESSION_BREG 5, 4, FRAME_SIZE_SAVE_REFS_AND_ARGS - 28
    CFI_EXPRESSION_BREG 6, 4, FRAME_SIZE_SAVE_REFS_AND_ARGS - 24
    CFI_EXPRESSION_BREG 7, 4, FRAME_SIZE_SAVE_REFS_AND_ARGS - 20
    CFI_EXPRESSION_BREG 8, 4, FRAME_SIZE_SAVE_REFS_AND_ARGS - 16
    CFI_EXPRESSION_BREG 10, 4, FRAME_SIZE_SAVE_REFS_AND_ARGS - 12
    CFI_EXPRESSION_BREG 11, 4, FRAME_SIZE_SAVE_REFS_AND_ARGS - 8
    // The saved return PC for managed stack walk is not necessarily our LR.
    // Skip managed FP args as these are native ABI caller-saves and not args.

    // Restore the hidden arg to r1 and caller PC.
    pop    {r1, lr}
    .cfi_adjust_cfa_offset -8
    .cfi_restore lr

    // Save our return PC in the padding.
    str   lr, [r4, #__SIZEOF_POINTER__]
    CFI_EXPRESSION_BREG 14, 4, __SIZEOF_POINTER__

    ldr    ip, [r1, #ART_METHOD_ACCESS_FLAGS_OFFSET]  // Load access flags.
    add    r2, r4, #1             // Prepare managed SP tagged for a GenericJNI frame.
    tst    ip, #ACCESS_FLAGS_METHOD_IS_NATIVE
    bne    .Lcritical_skip_prepare_runtime_method

    // When coming from a compiled method, the return PC for managed stack walk is LR.
    // (When coming from a compiled stub, the correct return PC is already stored above.)
    str    lr, [r4, #(FRAME_SIZE_SAVE_REFS_AND_ARGS - __SIZEOF_POINTER__)]

    // Replace the target method with the SaveRefsAndArgs runtime method.
    RUNTIME_CURRENT1 r1
    ldr    r1, [r1, #RUNTIME_SAVE_REFS_AND_ARGS_METHOD_OFFSET]

    mov    r2, r4                 // Prepare untagged managed SP for the runtime method.

.Lcritical_skip_prepare_runtime_method:
    // Store the method on the bottom of the managed frame.
    str    r1, [r4]

    // Place (maybe tagged) managed SP in Thread::Current()->top_quick_frame.
    str    r2, [rSELF, #THREAD_TOP_QUICK_FRAME_OFFSET]

    // Preserve the native arg register r0 in callee-save register r10 which was saved above.
    mov    r10, r0

    // Call artFindNativeMethodRunnable()
    mov    r0, rSELF   // pass Thread::Current()
    bl     artFindNativeMethodRunnable

    // Store result in scratch reg.
    mov    ip, r0

    // Restore the native arg register r0.
    mov    r0, r10

    // Restore the frame. We shall not need the method anymore.
    add    r1, r4, #FRAME_SIZE_SAVE_REFS_AND_ARGS - 40
    ldmia  r1, {r1-r3, r5-r8, r10-r11}
    .cfi_restore r5
    .cfi_restore r6
    .cfi_restore r7
    .cfi_restore r8
    .cfi_restore r10
    .cfi_restore r11

    REFRESH_MARKING_REGISTER

    // Check for exception before moving args back to keep the return PC for managed stack walk.
    cmp    ip, #0
    beq    .Lcritical_deliver_exception

    .cfi_remember_state

    // Restore our return PC.
    ldr    lr, [r4, #__SIZEOF_POINTER__]
    .cfi_restore lr

    // Move stack args to their original place.
    cmp    sp, r4
    beq    .Lcritical_skip_copy_args_back
    push   {r0, r1, r2, r3}
    .cfi_adjust_cfa_offset 16
    add    r0, sp, #16
    sub    r0, r4, r0
.Lcritical_copy_args_loop_back:
    ldrd   r2, r3, [r4, #-8]!
    subs   r0, r0, #8
    strd   r2, r3, [r4, #FRAME_SIZE_SAVE_REFS_AND_ARGS]
    bne    .Lcritical_copy_args_loop_back
    pop    {r0, r1, r2, r3}
    .cfi_adjust_cfa_offset -16
.Lcritical_skip_copy_args_back:

    // Remove the frame reservation.
    DECREASE_FRAME FRAME_SIZE_SAVE_REFS_AND_ARGS

    // Do the tail call.
    bx     ip
    .cfi_restore_state
    .cfi_def_cfa sp, FRAME_SIZE_SAVE_REFS_AND_ARGS

.Lcritical_deliver_exception:
    // The exception delivery checks that rSELF was saved but the SaveRefsAndArgs
    // frame does not save it, so we cannot use the existing SaveRefsAndArgs frame.
    // That's why we checked for exception after restoring registers from it.
    // We need to build a SaveAllCalleeSaves frame instead. Args are irrelevant at this
    // point but keep the area allocated for stack args to keep CFA definition simple.
#if FRAME_SIZE_SAVE_REFS_AND_ARGS != FRAME_SIZE_SAVE_ALL_CALLEE_SAVES
#  error "Expected FRAME_SIZE_SAVE_REFS_AND_ARGS == FRAME_SIZE_SAVE_ALL_CALLEE_SAVES"
    // Otherwise we would need to adjust SP and R4 and move our return PC which is at [R4, #4].
    // (Luckily, both SaveRefsAndArgs and SaveAllCalleeSaves frames have padding there.)
#endif

    // Spill registers for the SaveAllCalleeSaves frame above the stack args area.
    add    ip, r4, #FRAME_SIZE_SAVE_ALL_CALLEE_SAVES - 32
    stmia  ip, {r5-r11}  // Keep the caller PC for managed stack walk.
    CFI_EXPRESSION_BREG 5, 4, FRAME_SIZE_SAVE_ALL_CALLEE_SAVES - 32
    CFI_EXPRESSION_BREG 6, 4, FRAME_SIZE_SAVE_ALL_CALLEE_SAVES - 28
    CFI_EXPRESSION_BREG 7, 4, FRAME_SIZE_SAVE_ALL_CALLEE_SAVES - 24
    CFI_EXPRESSION_BREG 8, 4, FRAME_SIZE_SAVE_ALL_CALLEE_SAVES - 20
    CFI_EXPRESSION_BREG 9, 4, FRAME_SIZE_SAVE_ALL_CALLEE_SAVES - 16
    CFI_EXPRESSION_BREG 10, 4, FRAME_SIZE_SAVE_ALL_CALLEE_SAVES - 12
    CFI_EXPRESSION_BREG 11, 4, FRAME_SIZE_SAVE_ALL_CALLEE_SAVES - 8
    // Skip R4, it is callee-save in managed ABI.
    add    ip, r4, #12
    vstmia ip, {s16-s31}

    // Store ArtMethod* Runtime::callee_save_methods_[kSaveAllCalleeSaves] to the managed frame.
    RUNTIME_CURRENT2 ip
    ldr   ip, [ip, #RUNTIME_SAVE_ALL_CALLEE_SAVES_METHOD_OFFSET]
    str   ip, [r4]

    // Place the managed frame SP in Thread::Current()->top_quick_frame.
    str   r4, [rSELF, #THREAD_TOP_QUICK_FRAME_OFFSET]

    DELIVER_PENDING_EXCEPTION_FRAME_READY
END art_jni_dlsym_lookup_critical_stub

    /*
     * Read barrier for the method's declaring class needed by JNI stub for static methods.
     * (We're using a pointer to the declaring class in `ArtMethod` as `jclass`.)
     */
// The method argument is already in r0 for call to `artJniReadBarrier(ArtMethod*)`.
JNI_SAVE_MANAGED_ARGS_TRAMPOLINE art_jni_read_barrier, artJniReadBarrier

    /*
     * Trampoline to `artJniMethodStart()` that preserves all managed arguments.
     */
JNI_SAVE_MANAGED_ARGS_TRAMPOLINE art_jni_method_start, artJniMethodStart, rSELF


    /*
     * Trampoline to `artJniMonitoredMethodStart()` that preserves all managed arguments.
     */
JNI_SAVE_MANAGED_ARGS_TRAMPOLINE art_jni_monitored_method_start, artJniMonitoredMethodStart, rSELF

    /*
     * Entry from JNI stub that tries to lock the object in a fast path and
     * calls `artLockObjectFromCode()` (the same as for managed code) for the
     * difficult cases, may block for GC.
     * Custom calling convention:
     *     r4 holds the non-null object to lock.
     *     Callee-save registers have been saved and can be used as temporaries.
     *     All argument registers need to be preserved.
     */
ENTRY art_jni_lock_object
    // Note: the slow path is actually the art_jni_lock_object_no_inline (tail call).
    LOCK_OBJECT_FAST_PATH r4, r5, r6, r7, .Llock_object_jni_slow, /*can_be_null*/ 0
END art_jni_lock_object

    /*
     * Entry from JNI stub that calls `artLockObjectFromCode()`
     * (the same as for managed code), may block for GC.
     * Custom calling convention:
     *     r4 holds the non-null object to lock.
     *     Callee-save registers have been saved and can be used as temporaries.
     *     All argument registers need to be preserved.
     */
    .extern artLockObjectFromCode
ENTRY art_jni_lock_object_no_inline
    // This is also the slow path for art_jni_lock_object.
    // Note that we need a local label as the assembler emits bad instructions
    // for CBZ/CBNZ if we try to jump to `art_jni_lock_object_no_inline`.
.Llock_object_jni_slow:
    // Save managed args, r4 (for stack alignment) and LR.
    SAVE_MANAGED_ARGS_R4_LR_INCREASE_FRAME
    // Call `artLockObjectFromCode()`
    mov    r0, r4                       @ Pass the object to lock.
    mov    r1, rSELF                    @ Pass Thread::Current().
    bl     artLockObjectFromCode        @ (Object* obj, Thread*)
    // Check result.
    cbnz   r0, 1f
    // Restore args and r4 and return.
    RESTORE_MANAGED_ARGS_R4_AND_RETURN /*restore_cfa*/ 1
1:
    // All args are irrelevant when throwing an exception and R4 is preserved
    // by the `artLockObjectFromCode()` call. Load LR and drop saved args and R4.
    ldr    lr, [sp, #(MANAGED_ARGS_R4_LR_SAVE_SIZE - 4)]
    .cfi_restore lr
    DECREASE_FRAME MANAGED_ARGS_R4_LR_SAVE_SIZE
    // Make a tail call to `artDeliverPendingExceptionFromCode()`.
    // Rely on the JNI transition frame constructed in the JNI stub.
    mov    r0, rSELF                           @ Pass Thread::Current().
    b      artDeliverPendingExceptionFromCode  @ (Thread*)
END art_jni_lock_object_no_inline

    /*
     * Entry from JNI stub that tries to unlock the object in a fast path and calls
     * `artJniUnlockObject()` for the difficult cases. Note that failure to unlock
     * is fatal, so we do not need to check for exceptions in the slow path.
     * Custom calling convention:
     *     r4 holds the non-null object to unlock.
     *     Callee-save registers have been saved and can be used as temporaries.
     *     Return registers r0-r1 and s0-s1 need to be preserved.
     */
ENTRY art_jni_unlock_object
    // Note: the slow path is actually the art_jni_unlock_object_no_inline (tail call).
    UNLOCK_OBJECT_FAST_PATH r4, r5, r6, r7, .Lunlock_object_jni_slow, /*can_be_null*/ 0
END art_jni_unlock_object

    /*
     * Entry from JNI stub that calls `artJniUnlockObject()`. Note that failure to
     * unlock is fatal, so we do not need to check for exceptions.
     * Custom calling convention:
     *     r4 holds the non-null object to unlock.
     *     Callee-save registers have been saved and can be used as temporaries.
     *     Return registers r0-r1 and s0-s1 need to be preserved.
     */
    .extern artJniUnlockObject
ENTRY art_jni_unlock_object_no_inline
    // This is also the slow path for art_jni_unlock_object.
    // Note that we need a local label as the assembler emits bad instructions
    // for CBZ/CBNZ if we try to jump to `art_jni_unlock_object_no_inline`.
.Lunlock_object_jni_slow:
    // Save GPR return registers and return address. Also save r4 for stack alignment.
    push   {r0-r1, r4, lr}
    .cfi_adjust_cfa_offset 16
    .cfi_rel_offset lr, 12
    // Save FPR return registers.
    vpush  {s0-s1}
    .cfi_adjust_cfa_offset 8
    // Call `artJniUnlockObject()`.
    mov    r0, r4                       @ Pass the object to unlock.
    mov    r1, rSELF                    @ Pass Thread::Current().
    bl     artJniUnlockObject           @ (Object* obj, Thread*)
    // Restore FPR return registers.
    vpop   {s0-s1}
    .cfi_adjust_cfa_offset -8
    // Restore GPR return registers and r4 and return.
    pop    {r0-r1, r4, pc}
END art_jni_unlock_object_no_inline