/*
 * Copyright (C) 2011 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/* This file contains codegen for the Thumb2 ISA. */

#include "arm_lir.h"
#include "codegen_arm.h"
#include "dex/quick/mir_to_lir-inl.h"
#include "gc/accounting/card_table.h"
#include "entrypoints/quick/quick_entrypoints.h"

namespace art {

/*
 * The sparse table in the literal pool is an array of <key,displacement>
 * pairs.  For each set, we'll load them as a pair using ldmia.
 * This means that the register number of the temp we use for the key
 * must be lower than the reg for the displacement.
 *
 * The test loop will look something like:
 *
 *   adr   r_base, <table>
 *   ldr   r_val, [rARM_SP, v_reg_off]
 *   mov   r_idx, #table_size
 * lp:
 *   ldmia r_base!, {r_key, r_disp}
 *   sub   r_idx, #1
 *   cmp   r_val, r_key
 *   ifeq
 *   add   rARM_PC, r_disp   ; This is the branch from which we compute displacement
 *   cbnz  r_idx, lp
 */
void ArmMir2Lir::GenSparseSwitch(MIR* mir, uint32_t table_offset,
                                 RegLocation rl_src) {
  const uint16_t* table = cu_->insns + current_dalvik_offset_ + table_offset;
  if (cu_->verbose) {
    DumpSparseSwitchTable(table);
  }
  // Add the table to the list - we'll process it later
  SwitchTable *tab_rec =
      static_cast<SwitchTable*>(arena_->Alloc(sizeof(SwitchTable), kArenaAllocData));
  tab_rec->table = table;
  tab_rec->vaddr = current_dalvik_offset_;
  uint32_t size = table[1];
  tab_rec->targets = static_cast<LIR**>(arena_->Alloc(size * sizeof(LIR*), kArenaAllocLIR));
  switch_tables_.Insert(tab_rec);

  // Get the switch value
  rl_src = LoadValue(rl_src, kCoreReg);
  RegStorage r_base = AllocTemp();
  /* Allocate key and disp temps */
  RegStorage r_key = AllocTemp();
  RegStorage r_disp = AllocTemp();
  // Make sure r_key's register number is less than r_disp's number for ldmia
  if (r_key.GetReg() > r_disp.GetReg()) {
    RegStorage tmp = r_disp;
    r_disp = r_key;
    r_key = tmp;
  }
  // Materialize a pointer to the switch table
  NewLIR3(kThumb2Adr, r_base.GetReg(), 0, WrapPointer(tab_rec));
  // Set up r_idx
  RegStorage r_idx = AllocTemp();
  LoadConstant(r_idx, size);
  // Establish loop branch target
  LIR* target = NewLIR0(kPseudoTargetLabel);
  // Load next key/disp
  NewLIR2(kThumb2LdmiaWB, r_base.GetReg(), (1 << r_key.GetRegNum()) | (1 << r_disp.GetRegNum()));
  OpRegReg(kOpCmp, r_key, rl_src.reg);
  // Go if match. NOTE: No instruction set switch here - must stay Thumb2
  LIR* it = OpIT(kCondEq, "");
  LIR* switch_branch = NewLIR1(kThumb2AddPCR, r_disp.GetReg());
  OpEndIT(it);
  tab_rec->anchor = switch_branch;
  // Needs to use setflags encoding here
  OpRegRegImm(kOpSub, r_idx, r_idx, 1);  // For value == 1, this should set flags.
  DCHECK(last_lir_insn_->u.m.def_mask->HasBit(ResourceMask::kCCode));
  OpCondBranch(kCondNe, target);
}


void ArmMir2Lir::GenPackedSwitch(MIR* mir, uint32_t table_offset,
                                 RegLocation rl_src) {
  const uint16_t* table = cu_->insns + current_dalvik_offset_ + table_offset;
  if (cu_->verbose) {
    DumpPackedSwitchTable(table);
  }
  // Add the table to the list - we'll process it later
  SwitchTable *tab_rec =
      static_cast<SwitchTable*>(arena_->Alloc(sizeof(SwitchTable),  kArenaAllocData));
  tab_rec->table = table;
  tab_rec->vaddr = current_dalvik_offset_;
  uint32_t size = table[1];
  tab_rec->targets =
      static_cast<LIR**>(arena_->Alloc(size * sizeof(LIR*), kArenaAllocLIR));
  switch_tables_.Insert(tab_rec);

  // Get the switch value
  rl_src = LoadValue(rl_src, kCoreReg);
  RegStorage table_base = AllocTemp();
  // Materialize a pointer to the switch table
  NewLIR3(kThumb2Adr, table_base.GetReg(), 0, WrapPointer(tab_rec));
  int low_key = s4FromSwitchData(&table[2]);
  RegStorage keyReg;
  // Remove the bias, if necessary
  if (low_key == 0) {
    keyReg = rl_src.reg;
  } else {
    keyReg = AllocTemp();
    OpRegRegImm(kOpSub, keyReg, rl_src.reg, low_key);
  }
  // Bounds check - if < 0 or >= size continue following switch
  OpRegImm(kOpCmp, keyReg, size-1);
  LIR* branch_over = OpCondBranch(kCondHi, NULL);

  // Load the displacement from the switch table
  RegStorage disp_reg = AllocTemp();
  LoadBaseIndexed(table_base, keyReg, disp_reg, 2, k32);

  // ..and go! NOTE: No instruction set switch here - must stay Thumb2
  LIR* switch_branch = NewLIR1(kThumb2AddPCR, disp_reg.GetReg());
  tab_rec->anchor = switch_branch;

  /* branch_over target here */
  LIR* target = NewLIR0(kPseudoTargetLabel);
  branch_over->target = target;
}

/*
 * Array data table format:
 *  ushort ident = 0x0300   magic value
 *  ushort width            width of each element in the table
 *  uint   size             number of elements in the table
 *  ubyte  data[size*width] table of data values (may contain a single-byte
 *                          padding at the end)
 *
 * Total size is 4+(width * size + 1)/2 16-bit code units.
 */
void ArmMir2Lir::GenFillArrayData(uint32_t table_offset, RegLocation rl_src) {
  const uint16_t* table = cu_->insns + current_dalvik_offset_ + table_offset;
  // Add the table to the list - we'll process it later
  FillArrayData *tab_rec =
      static_cast<FillArrayData*>(arena_->Alloc(sizeof(FillArrayData), kArenaAllocData));
  tab_rec->table = table;
  tab_rec->vaddr = current_dalvik_offset_;
  uint16_t width = tab_rec->table[1];
  uint32_t size = tab_rec->table[2] | ((static_cast<uint32_t>(tab_rec->table[3])) << 16);
  tab_rec->size = (size * width) + 8;

  fill_array_data_.Insert(tab_rec);

  // Making a call - use explicit registers
  FlushAllRegs();   /* Everything to home location */
  LoadValueDirectFixed(rl_src, rs_r0);
  LoadWordDisp(rs_rARM_SELF, QUICK_ENTRYPOINT_OFFSET(4, pHandleFillArrayData).Int32Value(),
               rs_rARM_LR);
  // Materialize a pointer to the fill data image
  NewLIR3(kThumb2Adr, rs_r1.GetReg(), 0, WrapPointer(tab_rec));
  ClobberCallerSave();
  LIR* call_inst = OpReg(kOpBlx, rs_rARM_LR);
  MarkSafepointPC(call_inst);
}

/*
 * Handle unlocked -> thin locked transition inline or else call out to quick entrypoint. For more
 * details see monitor.cc.
 */
void ArmMir2Lir::GenMonitorEnter(int opt_flags, RegLocation rl_src) {
  FlushAllRegs();
  // FIXME: need separate LoadValues for object references.
  LoadValueDirectFixed(rl_src, rs_r0);  // Get obj
  LockCallTemps();  // Prepare for explicit register usage
  constexpr bool kArchVariantHasGoodBranchPredictor = false;  // TODO: true if cortex-A15.
  if (kArchVariantHasGoodBranchPredictor) {
    LIR* null_check_branch = nullptr;
    if ((opt_flags & MIR_IGNORE_NULL_CHECK) && !(cu_->disable_opt & (1 << kNullCheckElimination))) {
      null_check_branch = nullptr;  // No null check.
    } else {
      // If the null-check fails its handled by the slow-path to reduce exception related meta-data.
      if (cu_->compiler_driver->GetCompilerOptions().GetExplicitNullChecks()) {
        null_check_branch = OpCmpImmBranch(kCondEq, rs_r0, 0, NULL);
      }
    }
    Load32Disp(rs_rARM_SELF, Thread::ThinLockIdOffset<4>().Int32Value(), rs_r2);
    NewLIR3(kThumb2Ldrex, rs_r1.GetReg(), rs_r0.GetReg(),
        mirror::Object::MonitorOffset().Int32Value() >> 2);
    MarkPossibleNullPointerException(opt_flags);
    LIR* not_unlocked_branch = OpCmpImmBranch(kCondNe, rs_r1, 0, NULL);
    NewLIR4(kThumb2Strex, rs_r1.GetReg(), rs_r2.GetReg(), rs_r0.GetReg(),
        mirror::Object::MonitorOffset().Int32Value() >> 2);
    LIR* lock_success_branch = OpCmpImmBranch(kCondEq, rs_r1, 0, NULL);


    LIR* slow_path_target = NewLIR0(kPseudoTargetLabel);
    not_unlocked_branch->target = slow_path_target;
    if (null_check_branch != nullptr) {
      null_check_branch->target = slow_path_target;
    }
    // TODO: move to a slow path.
    // Go expensive route - artLockObjectFromCode(obj);
    LoadWordDisp(rs_rARM_SELF, QUICK_ENTRYPOINT_OFFSET(4, pLockObject).Int32Value(), rs_rARM_LR);
    ClobberCallerSave();
    LIR* call_inst = OpReg(kOpBlx, rs_rARM_LR);
    MarkSafepointPC(call_inst);

    LIR* success_target = NewLIR0(kPseudoTargetLabel);
    lock_success_branch->target = success_target;
    GenMemBarrier(kLoadLoad);
  } else {
    // Explicit null-check as slow-path is entered using an IT.
    GenNullCheck(rs_r0, opt_flags);
    Load32Disp(rs_rARM_SELF, Thread::ThinLockIdOffset<4>().Int32Value(), rs_r2);
    NewLIR3(kThumb2Ldrex, rs_r1.GetReg(), rs_r0.GetReg(),
        mirror::Object::MonitorOffset().Int32Value() >> 2);
    MarkPossibleNullPointerException(opt_flags);
    OpRegImm(kOpCmp, rs_r1, 0);
    LIR* it = OpIT(kCondEq, "");
    NewLIR4(kThumb2Strex/*eq*/, rs_r1.GetReg(), rs_r2.GetReg(), rs_r0.GetReg(),
        mirror::Object::MonitorOffset().Int32Value() >> 2);
    OpEndIT(it);
    OpRegImm(kOpCmp, rs_r1, 0);
    it = OpIT(kCondNe, "T");
    // Go expensive route - artLockObjectFromCode(self, obj);
    LoadWordDisp/*ne*/(rs_rARM_SELF, QUICK_ENTRYPOINT_OFFSET(4, pLockObject).Int32Value(),
                       rs_rARM_LR);
    ClobberCallerSave();
    LIR* call_inst = OpReg(kOpBlx/*ne*/, rs_rARM_LR);
    OpEndIT(it);
    MarkSafepointPC(call_inst);
    GenMemBarrier(kLoadLoad);
  }
}

/*
 * Handle thin locked -> unlocked transition inline or else call out to quick entrypoint. For more
 * details see monitor.cc. Note the code below doesn't use ldrex/strex as the code holds the lock
 * and can only give away ownership if its suspended.
 */
void ArmMir2Lir::GenMonitorExit(int opt_flags, RegLocation rl_src) {
  FlushAllRegs();
  LoadValueDirectFixed(rl_src, rs_r0);  // Get obj
  LockCallTemps();  // Prepare for explicit register usage
  LIR* null_check_branch = nullptr;
  Load32Disp(rs_rARM_SELF, Thread::ThinLockIdOffset<4>().Int32Value(), rs_r2);
  constexpr bool kArchVariantHasGoodBranchPredictor = false;  // TODO: true if cortex-A15.
  if (kArchVariantHasGoodBranchPredictor) {
    if ((opt_flags & MIR_IGNORE_NULL_CHECK) && !(cu_->disable_opt & (1 << kNullCheckElimination))) {
      null_check_branch = nullptr;  // No null check.
    } else {
      // If the null-check fails its handled by the slow-path to reduce exception related meta-data.
      if (cu_->compiler_driver->GetCompilerOptions().GetExplicitNullChecks()) {
        null_check_branch = OpCmpImmBranch(kCondEq, rs_r0, 0, NULL);
      }
    }
    Load32Disp(rs_r0, mirror::Object::MonitorOffset().Int32Value(), rs_r1);
    MarkPossibleNullPointerException(opt_flags);
    LoadConstantNoClobber(rs_r3, 0);
    LIR* slow_unlock_branch = OpCmpBranch(kCondNe, rs_r1, rs_r2, NULL);
    GenMemBarrier(kStoreLoad);
    Store32Disp(rs_r0, mirror::Object::MonitorOffset().Int32Value(), rs_r3);
    LIR* unlock_success_branch = OpUnconditionalBranch(NULL);

    LIR* slow_path_target = NewLIR0(kPseudoTargetLabel);
    slow_unlock_branch->target = slow_path_target;
    if (null_check_branch != nullptr) {
      null_check_branch->target = slow_path_target;
    }
    // TODO: move to a slow path.
    // Go expensive route - artUnlockObjectFromCode(obj);
    LoadWordDisp(rs_rARM_SELF, QUICK_ENTRYPOINT_OFFSET(4, pUnlockObject).Int32Value(), rs_rARM_LR);
    ClobberCallerSave();
    LIR* call_inst = OpReg(kOpBlx, rs_rARM_LR);
    MarkSafepointPC(call_inst);

    LIR* success_target = NewLIR0(kPseudoTargetLabel);
    unlock_success_branch->target = success_target;
  } else {
    // Explicit null-check as slow-path is entered using an IT.
    GenNullCheck(rs_r0, opt_flags);
    Load32Disp(rs_r0, mirror::Object::MonitorOffset().Int32Value(), rs_r1);  // Get lock
    MarkPossibleNullPointerException(opt_flags);
    Load32Disp(rs_rARM_SELF, Thread::ThinLockIdOffset<4>().Int32Value(), rs_r2);
    LoadConstantNoClobber(rs_r3, 0);
    // Is lock unheld on lock or held by us (==thread_id) on unlock?
    OpRegReg(kOpCmp, rs_r1, rs_r2);

    LIR* it = OpIT(kCondEq, "EE");
    if (GenMemBarrier(kStoreLoad)) {
      UpdateIT(it, "TEE");
    }
    Store32Disp/*eq*/(rs_r0, mirror::Object::MonitorOffset().Int32Value(), rs_r3);
    // Go expensive route - UnlockObjectFromCode(obj);
    LoadWordDisp/*ne*/(rs_rARM_SELF, QUICK_ENTRYPOINT_OFFSET(4, pUnlockObject).Int32Value(),
                       rs_rARM_LR);
    ClobberCallerSave();
    LIR* call_inst = OpReg(kOpBlx/*ne*/, rs_rARM_LR);
    OpEndIT(it);
    MarkSafepointPC(call_inst);
  }
}

void ArmMir2Lir::GenMoveException(RegLocation rl_dest) {
  int ex_offset = Thread::ExceptionOffset<4>().Int32Value();
  RegLocation rl_result = EvalLoc(rl_dest, kRefReg, true);
  RegStorage reset_reg = AllocTempRef();
  LoadRefDisp(rs_rARM_SELF, ex_offset, rl_result.reg);
  LoadConstant(reset_reg, 0);
  StoreRefDisp(rs_rARM_SELF, ex_offset, reset_reg);
  FreeTemp(reset_reg);
  StoreValue(rl_dest, rl_result);
}

/*
 * Mark garbage collection card. Skip if the value we're storing is null.
 */
void ArmMir2Lir::MarkGCCard(RegStorage val_reg, RegStorage tgt_addr_reg) {
  RegStorage reg_card_base = AllocTemp();
  RegStorage reg_card_no = AllocTemp();
  LIR* branch_over = OpCmpImmBranch(kCondEq, val_reg, 0, NULL);
  LoadWordDisp(rs_rARM_SELF, Thread::CardTableOffset<4>().Int32Value(), reg_card_base);
  OpRegRegImm(kOpLsr, reg_card_no, tgt_addr_reg, gc::accounting::CardTable::kCardShift);
  StoreBaseIndexed(reg_card_base, reg_card_no, reg_card_base, 0, kUnsignedByte);
  LIR* target = NewLIR0(kPseudoTargetLabel);
  branch_over->target = target;
  FreeTemp(reg_card_base);
  FreeTemp(reg_card_no);
}

void ArmMir2Lir::GenEntrySequence(RegLocation* ArgLocs, RegLocation rl_method) {
  int spill_count = num_core_spills_ + num_fp_spills_;
  /*
   * On entry, r0, r1, r2 & r3 are live.  Let the register allocation
   * mechanism know so it doesn't try to use any of them when
   * expanding the frame or flushing.  This leaves the utility
   * code with a single temp: r12.  This should be enough.
   */
  LockTemp(rs_r0);
  LockTemp(rs_r1);
  LockTemp(rs_r2);
  LockTemp(rs_r3);

  /*
   * We can safely skip the stack overflow check if we're
   * a leaf *and* our frame size < fudge factor.
   */
  bool skip_overflow_check = (mir_graph_->MethodIsLeaf() &&
                            (static_cast<size_t>(frame_size_) <
                            Thread::kStackOverflowReservedBytes));
  NewLIR0(kPseudoMethodEntry);
  bool large_frame = (static_cast<size_t>(frame_size_) > Thread::kStackOverflowReservedUsableBytes);
  if (!skip_overflow_check) {
    if (cu_->compiler_driver->GetCompilerOptions().GetExplicitStackOverflowChecks()) {
      if (!large_frame) {
        /* Load stack limit */
        LockTemp(rs_r12);
        Load32Disp(rs_rARM_SELF, Thread::StackEndOffset<4>().Int32Value(), rs_r12);
      }
    } else {
      // Implicit stack overflow check.
      // Generate a load from [sp, #-overflowsize].  If this is in the stack
      // redzone we will get a segmentation fault.
      //
      // Caveat coder: if someone changes the kStackOverflowReservedBytes value
      // we need to make sure that it's loadable in an immediate field of
      // a sub instruction.  Otherwise we will get a temp allocation and the
      // code size will increase.
      //
      // This is done before the callee save instructions to avoid any possibility
      // of these overflowing.  This uses r12 and that's never saved in a callee
      // save.
      OpRegRegImm(kOpSub, rs_r12, rs_rARM_SP, Thread::kStackOverflowReservedBytes);
      Load32Disp(rs_r12, 0, rs_r12);
      MarkPossibleStackOverflowException();
    }
  }
  /* Spill core callee saves */
  NewLIR1(kThumb2Push, core_spill_mask_);
  /* Need to spill any FP regs? */
  if (num_fp_spills_) {
    /*
     * NOTE: fp spills are a little different from core spills in that
     * they are pushed as a contiguous block.  When promoting from
     * the fp set, we must allocate all singles from s16..highest-promoted
     */
    NewLIR1(kThumb2VPushCS, num_fp_spills_);
  }

  const int spill_size = spill_count * 4;
  const int frame_size_without_spills = frame_size_ - spill_size;
  if (!skip_overflow_check) {
    if (cu_->compiler_driver->GetCompilerOptions().GetExplicitStackOverflowChecks()) {
      class StackOverflowSlowPath : public LIRSlowPath {
       public:
        StackOverflowSlowPath(Mir2Lir* m2l, LIR* branch, bool restore_lr, size_t sp_displace)
            : LIRSlowPath(m2l, m2l->GetCurrentDexPc(), branch, nullptr), restore_lr_(restore_lr),
              sp_displace_(sp_displace) {
        }
        void Compile() OVERRIDE {
          m2l_->ResetRegPool();
          m2l_->ResetDefTracking();
          GenerateTargetLabel(kPseudoThrowTarget);
          if (restore_lr_) {
            m2l_->LoadWordDisp(rs_rARM_SP, sp_displace_ - 4, rs_rARM_LR);
          }
          m2l_->OpRegImm(kOpAdd, rs_rARM_SP, sp_displace_);
          m2l_->ClobberCallerSave();
          ThreadOffset<4> func_offset = QUICK_ENTRYPOINT_OFFSET(4, pThrowStackOverflow);
          // Load the entrypoint directly into the pc instead of doing a load + branch. Assumes
          // codegen and target are in thumb2 mode.
          // NOTE: native pointer.
          m2l_->LoadWordDisp(rs_rARM_SELF, func_offset.Int32Value(), rs_rARM_PC);
        }

       private:
        const bool restore_lr_;
        const size_t sp_displace_;
      };
      if (large_frame) {
        // Note: may need a temp reg, and we only have r12 free at this point.
        OpRegRegImm(kOpSub, rs_rARM_LR, rs_rARM_SP, frame_size_without_spills);
        Load32Disp(rs_rARM_SELF, Thread::StackEndOffset<4>().Int32Value(), rs_r12);
        LIR* branch = OpCmpBranch(kCondUlt, rs_rARM_LR, rs_r12, nullptr);
        // Need to restore LR since we used it as a temp.
        AddSlowPath(new(arena_)StackOverflowSlowPath(this, branch, true, spill_size));
        OpRegCopy(rs_rARM_SP, rs_rARM_LR);     // Establish stack
      } else {
        /*
         * If the frame is small enough we are guaranteed to have enough space that remains to
         * handle signals on the user stack.  However, we may not have any free temp
         * registers at this point, so we'll temporarily add LR to the temp pool.
         */
        DCHECK(!GetRegInfo(rs_rARM_LR)->IsTemp());
        MarkTemp(rs_rARM_LR);
        FreeTemp(rs_rARM_LR);
        OpRegRegImm(kOpSub, rs_rARM_SP, rs_rARM_SP, frame_size_without_spills);
        Clobber(rs_rARM_LR);
        UnmarkTemp(rs_rARM_LR);
        LIR* branch = OpCmpBranch(kCondUlt, rs_rARM_SP, rs_r12, nullptr);
        AddSlowPath(new(arena_)StackOverflowSlowPath(this, branch, false, frame_size_));
      }
    } else {
      // Implicit stack overflow check has already been done.  Just make room on the
      // stack for the frame now.
      OpRegImm(kOpSub, rs_rARM_SP, frame_size_without_spills);
    }
  } else {
    OpRegImm(kOpSub, rs_rARM_SP, frame_size_without_spills);
  }

  FlushIns(ArgLocs, rl_method);

  FreeTemp(rs_r0);
  FreeTemp(rs_r1);
  FreeTemp(rs_r2);
  FreeTemp(rs_r3);
  FreeTemp(rs_r12);
}

void ArmMir2Lir::GenExitSequence() {
  int spill_count = num_core_spills_ + num_fp_spills_;
  /*
   * In the exit path, r0/r1 are live - make sure they aren't
   * allocated by the register utilities as temps.
   */
  LockTemp(rs_r0);
  LockTemp(rs_r1);

  NewLIR0(kPseudoMethodExit);
  OpRegImm(kOpAdd, rs_rARM_SP, frame_size_ - (spill_count * 4));
  /* Need to restore any FP callee saves? */
  if (num_fp_spills_) {
    NewLIR1(kThumb2VPopCS, num_fp_spills_);
  }
  if (core_spill_mask_ & (1 << rs_rARM_LR.GetRegNum())) {
    /* Unspill rARM_LR to rARM_PC */
    core_spill_mask_ &= ~(1 << rs_rARM_LR.GetRegNum());
    core_spill_mask_ |= (1 << rs_rARM_PC.GetRegNum());
  }
  NewLIR1(kThumb2Pop, core_spill_mask_);
  if (!(core_spill_mask_ & (1 << rs_rARM_PC.GetRegNum()))) {
    /* We didn't pop to rARM_PC, so must do a bv rARM_LR */
    NewLIR1(kThumbBx, rs_rARM_LR.GetReg());
  }
}

void ArmMir2Lir::GenSpecialExitSequence() {
  NewLIR1(kThumbBx, rs_rARM_LR.GetReg());
}

}  // namespace art