compiler/dex/quick/x86/call_x86.cc - platform/art - Git at Google

 /*
  * Copyright (C) 2012 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 /* This file contains codegen for the X86 ISA */

 #include "codegen_x86.h"
 #include "dex/quick/mir_to_lir-inl.h"
 #include "gc/accounting/card_table.h"
 #include "x86_lir.h"

 namespace art {

 /*
  * The sparse table in the literal pool is an array of <key,displacement>
  * pairs.
  */
 void X86Mir2Lir::GenSparseSwitch(MIR* mir, DexOffset table_offset,
                                  RegLocation rl_src) {
   const uint16_t* table = cu_->insns + current_dalvik_offset_ + table_offset;
   if (cu_->verbose) {
     DumpSparseSwitchTable(table);
   }
   int entries = table[1];
   const int32_t* keys = reinterpret_cast<const int32_t*>(&table[2]);
   const int32_t* targets = &keys[entries];
   rl_src = LoadValue(rl_src, kCoreReg);
   for (int i = 0; i < entries; i++) {
     int key = keys[i];
     BasicBlock* case_block =
         mir_graph_->FindBlock(current_dalvik_offset_ + targets[i]);
     OpCmpImmBranch(kCondEq, rl_src.reg, key, &block_label_list_[case_block->id]);
   }
 }

 /*
  * Code pattern will look something like:
  *
  * mov  r_val, ..
  * call 0
  * pop  r_start_of_method
  * sub  r_start_of_method, ..
  * mov  r_key_reg, r_val
  * sub  r_key_reg, low_key
  * cmp  r_key_reg, size-1  ; bound check
  * ja   done
  * mov  r_disp, [r_start_of_method + r_key_reg * 4 + table_offset]
  * add  r_start_of_method, r_disp
  * jmp  r_start_of_method
  * done:
  */
 void X86Mir2Lir::GenPackedSwitch(MIR* mir, DexOffset table_offset,
                                  RegLocation rl_src) {
   const uint16_t* table = cu_->insns + current_dalvik_offset_ + table_offset;
   if (cu_->verbose) {
     DumpPackedSwitchTable(table);
   }
   // Add the table to the list - we'll process it later
   SwitchTable* tab_rec =
       static_cast<SwitchTable*>(arena_->Alloc(sizeof(SwitchTable), kArenaAllocData));
   tab_rec->table = table;
   tab_rec->vaddr = current_dalvik_offset_;
   int size = table[1];
   tab_rec->targets = static_cast<LIR**>(arena_->Alloc(size * sizeof(LIR*),
                                                       kArenaAllocLIR));
   switch_tables_.Insert(tab_rec);

   // Get the switch value
   rl_src = LoadValue(rl_src, kCoreReg);
   // NewLIR0(kX86Bkpt);

   // Materialize a pointer to the switch table
   RegStorage start_of_method_reg;
   if (base_of_code_ != nullptr) {
     // We can use the saved value.
     RegLocation rl_method = mir_graph_->GetRegLocation(base_of_code_->s_reg_low);
     if (rl_method.wide) {
       rl_method = LoadValueWide(rl_method, kCoreReg);
     } else {
       rl_method = LoadValue(rl_method, kCoreReg);
     }
     start_of_method_reg = rl_method.reg;
     store_method_addr_used_ = true;
   } else {
     if (Gen64Bit()) {
       start_of_method_reg = AllocTempWide();
     } else {
       start_of_method_reg = AllocTemp();
     }
     NewLIR1(kX86StartOfMethod, start_of_method_reg.GetReg());
   }
   int low_key = s4FromSwitchData(&table[2]);
   RegStorage keyReg;
   // Remove the bias, if necessary
   if (low_key == 0) {
     keyReg = rl_src.reg;
   } else {
     keyReg = AllocTemp();
     OpRegRegImm(kOpSub, keyReg, rl_src.reg, low_key);
   }
   // Bounds check - if < 0 or >= size continue following switch
   OpRegImm(kOpCmp, keyReg, size-1);
   LIR* branch_over = OpCondBranch(kCondHi, NULL);

   // Load the displacement from the switch table
   RegStorage disp_reg = AllocTemp();
   NewLIR5(kX86PcRelLoadRA, disp_reg.GetReg(), start_of_method_reg.GetReg(), keyReg.GetReg(),
           2, WrapPointer(tab_rec));
   // Add displacement to start of method
   if (Gen64Bit()) {
     NewLIR2(kX86Add64RR, start_of_method_reg.GetReg(), disp_reg.GetReg());
   } else {
     OpRegReg(kOpAdd, start_of_method_reg, disp_reg);
   }
   // ..and go!
   LIR* switch_branch = NewLIR1(kX86JmpR, start_of_method_reg.GetReg());
   tab_rec->anchor = switch_branch;

   /* branch_over target here */
   LIR* target = NewLIR0(kPseudoTargetLabel);
   branch_over->target = target;
 }

 /*
  * Array data table format:
  *  ushort ident = 0x0300   magic value
  *  ushort width            width of each element in the table
  *  uint   size             number of elements in the table
  *  ubyte  data[size*width] table of data values (may contain a single-byte
  *                          padding at the end)
  *
  * Total size is 4+(width * size + 1)/2 16-bit code units.
  */
 void X86Mir2Lir::GenFillArrayData(DexOffset table_offset, RegLocation rl_src) {
   const uint16_t* table = cu_->insns + current_dalvik_offset_ + table_offset;
   // Add the table to the list - we'll process it later
   FillArrayData* tab_rec =
       static_cast<FillArrayData*>(arena_->Alloc(sizeof(FillArrayData), kArenaAllocData));
   tab_rec->table = table;
   tab_rec->vaddr = current_dalvik_offset_;
   uint16_t width = tab_rec->table[1];
   uint32_t size = tab_rec->table[2] | ((static_cast<uint32_t>(tab_rec->table[3])) << 16);
   tab_rec->size = (size * width) + 8;

   fill_array_data_.Insert(tab_rec);

   // Making a call - use explicit registers
   FlushAllRegs();   /* Everything to home location */
   LoadValueDirectFixed(rl_src, rs_rX86_ARG0);
   // Materialize a pointer to the fill data image
   if (base_of_code_ != nullptr) {
     // We can use the saved value.
     RegLocation rl_method = mir_graph_->GetRegLocation(base_of_code_->s_reg_low);
     if (rl_method.wide) {
       LoadValueDirectWide(rl_method, rs_rX86_ARG2);
     } else {
       LoadValueDirect(rl_method, rs_rX86_ARG2);
     }
     store_method_addr_used_ = true;
   } else {
     // TODO(64) force to be 64-bit
     NewLIR1(kX86StartOfMethod, rs_rX86_ARG2.GetReg());
   }
   NewLIR2(kX86PcRelAdr, rs_rX86_ARG1.GetReg(), WrapPointer(tab_rec));
   NewLIR2(Gen64Bit() ? kX86Add64RR : kX86Add32RR, rs_rX86_ARG1.GetReg(), rs_rX86_ARG2.GetReg());
   if (cu_->target64) {
     CallRuntimeHelperRegReg(QUICK_ENTRYPOINT_OFFSET(8, pHandleFillArrayData), rs_rX86_ARG0,
                             rs_rX86_ARG1, true);
   } else {
     CallRuntimeHelperRegReg(QUICK_ENTRYPOINT_OFFSET(4, pHandleFillArrayData), rs_rX86_ARG0,
                             rs_rX86_ARG1, true);
   }
 }

 void X86Mir2Lir::GenMoveException(RegLocation rl_dest) {
   int ex_offset = cu_->target64 ?
       Thread::ExceptionOffset<8>().Int32Value() :
       Thread::ExceptionOffset<4>().Int32Value();
   RegLocation rl_result = EvalLoc(rl_dest, kRefReg, true);
   NewLIR2(kX86Mov32RT, rl_result.reg.GetReg(), ex_offset);
   NewLIR2(kX86Mov32TI, ex_offset, 0);
   StoreValue(rl_dest, rl_result);
 }

 /*
  * Mark garbage collection card. Skip if the value we're storing is null.
  */
 void X86Mir2Lir::MarkGCCard(RegStorage val_reg, RegStorage tgt_addr_reg) {
   RegStorage reg_card_base = AllocTemp();
   RegStorage reg_card_no = AllocTemp();
   LIR* branch_over = OpCmpImmBranch(kCondEq, val_reg, 0, NULL);
   int ct_offset = cu_->target64 ?
       Thread::CardTableOffset<8>().Int32Value() :
       Thread::CardTableOffset<4>().Int32Value();
   if (Gen64Bit()) {
     NewLIR2(kX86Mov64RT, reg_card_base.GetReg(), ct_offset);
   } else {
     NewLIR2(kX86Mov32RT, reg_card_base.GetReg(), ct_offset);
   }
   OpRegRegImm(kOpLsr, reg_card_no, tgt_addr_reg, gc::accounting::CardTable::kCardShift);
   StoreBaseIndexed(reg_card_base, reg_card_no, reg_card_base, 0, kUnsignedByte);
   LIR* target = NewLIR0(kPseudoTargetLabel);
   branch_over->target = target;
   FreeTemp(reg_card_base);
   FreeTemp(reg_card_no);
 }

 void X86Mir2Lir::GenEntrySequence(RegLocation* ArgLocs, RegLocation rl_method) {
   /*
    * On entry, rX86_ARG0, rX86_ARG1, rX86_ARG2 are live.  Let the register
    * allocation mechanism know so it doesn't try to use any of them when
    * expanding the frame or flushing.  This leaves the utility
    * code with no spare temps.
    */
   LockTemp(rs_rX86_ARG0);
   LockTemp(rs_rX86_ARG1);
   LockTemp(rs_rX86_ARG2);

   /* Build frame, return address already on stack */
   stack_decrement_ = OpRegImm(kOpSub, rs_rX86_SP, frame_size_ - GetInstructionSetPointerSize(cu_->instruction_set));

   /*
    * We can safely skip the stack overflow check if we're
    * a leaf *and* our frame size < fudge factor.
    */
   const bool skip_overflow_check = (mir_graph_->MethodIsLeaf() &&
       (static_cast<size_t>(frame_size_) < Thread::kStackOverflowReservedBytes));
   NewLIR0(kPseudoMethodEntry);
   /* Spill core callee saves */
   SpillCoreRegs();
   /* NOTE: promotion of FP regs currently unsupported, thus no FP spill */
   DCHECK_EQ(num_fp_spills_, 0);
   if (!skip_overflow_check) {
     class StackOverflowSlowPath : public LIRSlowPath {
      public:
       StackOverflowSlowPath(Mir2Lir* m2l, LIR* branch, size_t sp_displace)
           : LIRSlowPath(m2l, m2l->GetCurrentDexPc(), branch, nullptr), sp_displace_(sp_displace) {
       }
       void Compile() OVERRIDE {
         m2l_->ResetRegPool();
         m2l_->ResetDefTracking();
         GenerateTargetLabel(kPseudoThrowTarget);
         m2l_->OpRegImm(kOpAdd, rs_rX86_SP, sp_displace_);
         m2l_->ClobberCallerSave();
         // Assumes codegen and target are in thumb2 mode.
         if (cu_->target64) {
           m2l_->CallHelper(RegStorage::InvalidReg(), QUICK_ENTRYPOINT_OFFSET(8, pThrowStackOverflow),
                            false /* MarkSafepointPC */, false /* UseLink */);
         } else {
           m2l_->CallHelper(RegStorage::InvalidReg(), QUICK_ENTRYPOINT_OFFSET(4, pThrowStackOverflow),
                            false /* MarkSafepointPC */, false /* UseLink */);
         }
       }

      private:
       const size_t sp_displace_;
     };
     // TODO: for large frames we should do something like:
     // spill ebp
     // lea ebp, [esp + frame_size]
     // cmp ebp, fs:[stack_end_]
     // jcc stack_overflow_exception
     // mov esp, ebp
     // in case a signal comes in that's not using an alternate signal stack and the large frame may
     // have moved us outside of the reserved area at the end of the stack.
     // cmp rs_rX86_SP, fs:[stack_end_]; jcc throw_slowpath
     if (cu_->target64) {
       OpRegThreadMem(kOpCmp, rs_rX86_SP, Thread::StackEndOffset<8>());
     } else {
       OpRegThreadMem(kOpCmp, rs_rX86_SP, Thread::StackEndOffset<4>());
     }
     LIR* branch = OpCondBranch(kCondUlt, nullptr);
     AddSlowPath(
         new(arena_)StackOverflowSlowPath(this, branch,
                                          frame_size_ -
                                          GetInstructionSetPointerSize(cu_->instruction_set)));
   }

   FlushIns(ArgLocs, rl_method);

   if (base_of_code_ != nullptr) {
     // We have been asked to save the address of the method start for later use.
     setup_method_address_[0] = NewLIR1(kX86StartOfMethod, rs_rX86_ARG0.GetReg());
     int displacement = SRegOffset(base_of_code_->s_reg_low);
     // Native pointer - must be natural word size.
     setup_method_address_[1] = StoreBaseDisp(rs_rX86_SP, displacement, rs_rX86_ARG0, Gen64Bit() ? k64 : k32);
   }

   FreeTemp(rs_rX86_ARG0);
   FreeTemp(rs_rX86_ARG1);
   FreeTemp(rs_rX86_ARG2);
 }

 void X86Mir2Lir::GenExitSequence() {
   /*
    * In the exit path, rX86_RET0/rX86_RET1 are live - make sure they aren't
    * allocated by the register utilities as temps.
    */
   LockTemp(rs_rX86_RET0);
   LockTemp(rs_rX86_RET1);

   NewLIR0(kPseudoMethodExit);
   UnSpillCoreRegs();
   /* Remove frame except for return address */
   stack_increment_ = OpRegImm(kOpAdd, rs_rX86_SP, frame_size_ - GetInstructionSetPointerSize(cu_->instruction_set));
   NewLIR0(kX86Ret);
 }

 void X86Mir2Lir::GenSpecialExitSequence() {
   NewLIR0(kX86Ret);
 }

 }  // namespace art
	/*
	* Copyright (C) 2012 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	/* This file contains codegen for the X86 ISA */

	#include "codegen_x86.h"
	#include "dex/quick/mir_to_lir-inl.h"
	#include "gc/accounting/card_table.h"
	#include "x86_lir.h"

	namespace art {

	/*
	* The sparse table in the literal pool is an array of <key,displacement>
	* pairs.
	*/
	void X86Mir2Lir::GenSparseSwitch(MIR* mir, DexOffset table_offset,
	RegLocation rl_src) {
	const uint16_t* table = cu_->insns + current_dalvik_offset_ + table_offset;
	if (cu_->verbose) {
	DumpSparseSwitchTable(table);
	}
	int entries = table[1];
	const int32_t* keys = reinterpret_cast<const int32_t*>(&table[2]);
	const int32_t* targets = &keys[entries];
	rl_src = LoadValue(rl_src, kCoreReg);
	for (int i = 0; i < entries; i++) {
	int key = keys[i];
	BasicBlock* case_block =
	mir_graph_->FindBlock(current_dalvik_offset_ + targets[i]);
	OpCmpImmBranch(kCondEq, rl_src.reg, key, &block_label_list_[case_block->id]);
	}
	}

	/*
	* Code pattern will look something like:
	*
	* mov r_val, ..
	* call 0
	* pop r_start_of_method
	* sub r_start_of_method, ..
	* mov r_key_reg, r_val
	* sub r_key_reg, low_key
	* cmp r_key_reg, size-1 ; bound check
	* ja done
	* mov r_disp, [r_start_of_method + r_key_reg * 4 + table_offset]
	* add r_start_of_method, r_disp
	* jmp r_start_of_method
	* done:
	*/
	void X86Mir2Lir::GenPackedSwitch(MIR* mir, DexOffset table_offset,
	RegLocation rl_src) {
	const uint16_t* table = cu_->insns + current_dalvik_offset_ + table_offset;
	if (cu_->verbose) {
	DumpPackedSwitchTable(table);
	}
	// Add the table to the list - we'll process it later
	SwitchTable* tab_rec =
	static_cast<SwitchTable*>(arena_->Alloc(sizeof(SwitchTable), kArenaAllocData));
	tab_rec->table = table;
	tab_rec->vaddr = current_dalvik_offset_;
	int size = table[1];
	tab_rec->targets = static_cast<LIR*>(arena_->Alloc(size sizeof(LIR*),
	kArenaAllocLIR));
	switch_tables_.Insert(tab_rec);

	// Get the switch value
	rl_src = LoadValue(rl_src, kCoreReg);
	// NewLIR0(kX86Bkpt);

	// Materialize a pointer to the switch table
	RegStorage start_of_method_reg;
	if (base_of_code_ != nullptr) {
	// We can use the saved value.
	RegLocation rl_method = mir_graph_->GetRegLocation(base_of_code_->s_reg_low);
	if (rl_method.wide) {
	rl_method = LoadValueWide(rl_method, kCoreReg);
	} else {
	rl_method = LoadValue(rl_method, kCoreReg);
	}
	start_of_method_reg = rl_method.reg;
	store_method_addr_used_ = true;
	} else {
	if (Gen64Bit()) {
	start_of_method_reg = AllocTempWide();
	} else {
	start_of_method_reg = AllocTemp();
	}
	NewLIR1(kX86StartOfMethod, start_of_method_reg.GetReg());
	}
	int low_key = s4FromSwitchData(&table[2]);
	RegStorage keyReg;
	// Remove the bias, if necessary
	if (low_key == 0) {
	keyReg = rl_src.reg;
	} else {
	keyReg = AllocTemp();
	OpRegRegImm(kOpSub, keyReg, rl_src.reg, low_key);
	}
	// Bounds check - if < 0 or >= size continue following switch
	OpRegImm(kOpCmp, keyReg, size-1);
	LIR* branch_over = OpCondBranch(kCondHi, NULL);

	// Load the displacement from the switch table
	RegStorage disp_reg = AllocTemp();
	NewLIR5(kX86PcRelLoadRA, disp_reg.GetReg(), start_of_method_reg.GetReg(), keyReg.GetReg(),
	2, WrapPointer(tab_rec));
	// Add displacement to start of method
	if (Gen64Bit()) {
	NewLIR2(kX86Add64RR, start_of_method_reg.GetReg(), disp_reg.GetReg());
	} else {
	OpRegReg(kOpAdd, start_of_method_reg, disp_reg);
	}
	// ..and go!
	LIR* switch_branch = NewLIR1(kX86JmpR, start_of_method_reg.GetReg());
	tab_rec->anchor = switch_branch;

	/* branch_over target here */
	LIR* target = NewLIR0(kPseudoTargetLabel);
	branch_over->target = target;
	}

	/*
	* Array data table format:
	* ushort ident = 0x0300 magic value
	* ushort width width of each element in the table
	* uint size number of elements in the table
	* ubyte data[size*width] table of data values (may contain a single-byte
	* padding at the end)
	*
	* Total size is 4+(width * size + 1)/2 16-bit code units.
	*/
	void X86Mir2Lir::GenFillArrayData(DexOffset table_offset, RegLocation rl_src) {
	const uint16_t* table = cu_->insns + current_dalvik_offset_ + table_offset;
	// Add the table to the list - we'll process it later
	FillArrayData* tab_rec =
	static_cast<FillArrayData*>(arena_->Alloc(sizeof(FillArrayData), kArenaAllocData));
	tab_rec->table = table;
	tab_rec->vaddr = current_dalvik_offset_;
	uint16_t width = tab_rec->table[1];
	uint32_t size = tab_rec->table[2] \| ((static_cast<uint32_t>(tab_rec->table[3])) << 16);
	tab_rec->size = (size * width) + 8;

	fill_array_data_.Insert(tab_rec);

	// Making a call - use explicit registers
	FlushAllRegs(); /* Everything to home location */
	LoadValueDirectFixed(rl_src, rs_rX86_ARG0);
	// Materialize a pointer to the fill data image
	if (base_of_code_ != nullptr) {
	// We can use the saved value.
	RegLocation rl_method = mir_graph_->GetRegLocation(base_of_code_->s_reg_low);
	if (rl_method.wide) {
	LoadValueDirectWide(rl_method, rs_rX86_ARG2);
	} else {
	LoadValueDirect(rl_method, rs_rX86_ARG2);
	}
	store_method_addr_used_ = true;
	} else {
	// TODO(64) force to be 64-bit
	NewLIR1(kX86StartOfMethod, rs_rX86_ARG2.GetReg());
	}
	NewLIR2(kX86PcRelAdr, rs_rX86_ARG1.GetReg(), WrapPointer(tab_rec));
	NewLIR2(Gen64Bit() ? kX86Add64RR : kX86Add32RR, rs_rX86_ARG1.GetReg(), rs_rX86_ARG2.GetReg());
	if (cu_->target64) {
	CallRuntimeHelperRegReg(QUICK_ENTRYPOINT_OFFSET(8, pHandleFillArrayData), rs_rX86_ARG0,
	rs_rX86_ARG1, true);
	} else {
	CallRuntimeHelperRegReg(QUICK_ENTRYPOINT_OFFSET(4, pHandleFillArrayData), rs_rX86_ARG0,
	rs_rX86_ARG1, true);
	}
	}

	void X86Mir2Lir::GenMoveException(RegLocation rl_dest) {
	int ex_offset = cu_->target64 ?
	Thread::ExceptionOffset<8>().Int32Value() :
	Thread::ExceptionOffset<4>().Int32Value();
	RegLocation rl_result = EvalLoc(rl_dest, kRefReg, true);
	NewLIR2(kX86Mov32RT, rl_result.reg.GetReg(), ex_offset);
	NewLIR2(kX86Mov32TI, ex_offset, 0);
	StoreValue(rl_dest, rl_result);
	}

	/*
	* Mark garbage collection card. Skip if the value we're storing is null.
	*/
	void X86Mir2Lir::MarkGCCard(RegStorage val_reg, RegStorage tgt_addr_reg) {
	RegStorage reg_card_base = AllocTemp();
	RegStorage reg_card_no = AllocTemp();
	LIR* branch_over = OpCmpImmBranch(kCondEq, val_reg, 0, NULL);
	int ct_offset = cu_->target64 ?
	Thread::CardTableOffset<8>().Int32Value() :
	Thread::CardTableOffset<4>().Int32Value();
	if (Gen64Bit()) {
	NewLIR2(kX86Mov64RT, reg_card_base.GetReg(), ct_offset);
	} else {
	NewLIR2(kX86Mov32RT, reg_card_base.GetReg(), ct_offset);
	}
	OpRegRegImm(kOpLsr, reg_card_no, tgt_addr_reg, gc::accounting::CardTable::kCardShift);
	StoreBaseIndexed(reg_card_base, reg_card_no, reg_card_base, 0, kUnsignedByte);
	LIR* target = NewLIR0(kPseudoTargetLabel);
	branch_over->target = target;
	FreeTemp(reg_card_base);
	FreeTemp(reg_card_no);
	}

	void X86Mir2Lir::GenEntrySequence(RegLocation* ArgLocs, RegLocation rl_method) {
	/*
	* On entry, rX86_ARG0, rX86_ARG1, rX86_ARG2 are live. Let the register
	* allocation mechanism know so it doesn't try to use any of them when
	* expanding the frame or flushing. This leaves the utility
	* code with no spare temps.
	*/
	LockTemp(rs_rX86_ARG0);
	LockTemp(rs_rX86_ARG1);
	LockTemp(rs_rX86_ARG2);

	/* Build frame, return address already on stack */
	stack_decrement_ = OpRegImm(kOpSub, rs_rX86_SP, frame_size_ - GetInstructionSetPointerSize(cu_->instruction_set));

	/*
	* We can safely skip the stack overflow check if we're
	* a leaf and our frame size < fudge factor.
	*/
	const bool skip_overflow_check = (mir_graph_->MethodIsLeaf() &&
	(static_cast<size_t>(frame_size_) < Thread::kStackOverflowReservedBytes));
	NewLIR0(kPseudoMethodEntry);
	/* Spill core callee saves */
	SpillCoreRegs();
	/* NOTE: promotion of FP regs currently unsupported, thus no FP spill */
	DCHECK_EQ(num_fp_spills_, 0);
	if (!skip_overflow_check) {
	class StackOverflowSlowPath : public LIRSlowPath {
	public:
	StackOverflowSlowPath(Mir2Lir* m2l, LIR* branch, size_t sp_displace)
	: LIRSlowPath(m2l, m2l->GetCurrentDexPc(), branch, nullptr), sp_displace_(sp_displace) {
	}
	void Compile() OVERRIDE {
	m2l_->ResetRegPool();
	m2l_->ResetDefTracking();
	GenerateTargetLabel(kPseudoThrowTarget);
	m2l_->OpRegImm(kOpAdd, rs_rX86_SP, sp_displace_);
	m2l_->ClobberCallerSave();
	// Assumes codegen and target are in thumb2 mode.
	if (cu_->target64) {
	m2l_->CallHelper(RegStorage::InvalidReg(), QUICK_ENTRYPOINT_OFFSET(8, pThrowStackOverflow),
	false /* MarkSafepointPC /, false / UseLink */);
	} else {
	m2l_->CallHelper(RegStorage::InvalidReg(), QUICK_ENTRYPOINT_OFFSET(4, pThrowStackOverflow),
	false /* MarkSafepointPC /, false / UseLink */);
	}
	}

	private:
	const size_t sp_displace_;
	};
	// TODO: for large frames we should do something like:
	// spill ebp
	// lea ebp, [esp + frame_size]
	// cmp ebp, fs:[stack_end_]
	// jcc stack_overflow_exception
	// mov esp, ebp
	// in case a signal comes in that's not using an alternate signal stack and the large frame may
	// have moved us outside of the reserved area at the end of the stack.
	// cmp rs_rX86_SP, fs:[stack_end_]; jcc throw_slowpath
	if (cu_->target64) {
	OpRegThreadMem(kOpCmp, rs_rX86_SP, Thread::StackEndOffset<8>());
	} else {
	OpRegThreadMem(kOpCmp, rs_rX86_SP, Thread::StackEndOffset<4>());
	}
	LIR* branch = OpCondBranch(kCondUlt, nullptr);
	AddSlowPath(
	new(arena_)StackOverflowSlowPath(this, branch,
	frame_size_ -
	GetInstructionSetPointerSize(cu_->instruction_set)));
	}

	FlushIns(ArgLocs, rl_method);

	if (base_of_code_ != nullptr) {
	// We have been asked to save the address of the method start for later use.
	setup_method_address_[0] = NewLIR1(kX86StartOfMethod, rs_rX86_ARG0.GetReg());
	int displacement = SRegOffset(base_of_code_->s_reg_low);
	// Native pointer - must be natural word size.
	setup_method_address_[1] = StoreBaseDisp(rs_rX86_SP, displacement, rs_rX86_ARG0, Gen64Bit() ? k64 : k32);
	}

	FreeTemp(rs_rX86_ARG0);
	FreeTemp(rs_rX86_ARG1);
	FreeTemp(rs_rX86_ARG2);
	}

	void X86Mir2Lir::GenExitSequence() {
	/*
	* In the exit path, rX86_RET0/rX86_RET1 are live - make sure they aren't
	* allocated by the register utilities as temps.
	*/
	LockTemp(rs_rX86_RET0);
	LockTemp(rs_rX86_RET1);

	NewLIR0(kPseudoMethodExit);
	UnSpillCoreRegs();
	/* Remove frame except for return address */
	stack_increment_ = OpRegImm(kOpAdd, rs_rX86_SP, frame_size_ - GetInstructionSetPointerSize(cu_->instruction_set));
	NewLIR0(kX86Ret);
	}

	void X86Mir2Lir::GenSpecialExitSequence() {
	NewLIR0(kX86Ret);
	}

	} // namespace art