| // |
| // Copyright (C) 2011 The Android Open Source Project |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| |
| art_cc_defaults { |
| name: "libart-dex2oat-defaults", |
| defaults: ["art_defaults"], |
| host_supported: true, |
| srcs: [ |
| "linker/elf_writer.cc", |
| "linker/elf_writer_quick.cc", |
| "linker/image_writer.cc", |
| "linker/multi_oat_relative_patcher.cc", |
| "linker/oat_writer.cc", |
| "linker/relative_patcher.cc", |
| ], |
| |
| codegen: { |
| arm: { |
| srcs: [ |
| "linker/arm/relative_patcher_arm_base.cc", |
| "linker/arm/relative_patcher_thumb2.cc", |
| ], |
| }, |
| arm64: { |
| srcs: [ |
| "linker/arm64/relative_patcher_arm64.cc", |
| ], |
| }, |
| mips: { |
| srcs: [ |
| "linker/mips/relative_patcher_mips.cc", |
| ], |
| }, |
| mips64: { |
| srcs: [ |
| "linker/mips64/relative_patcher_mips64.cc", |
| ], |
| }, |
| x86: { |
| srcs: [ |
| "linker/x86/relative_patcher_x86.cc", |
| "linker/x86/relative_patcher_x86_base.cc", |
| ], |
| }, |
| x86_64: { |
| srcs: [ |
| "linker/x86_64/relative_patcher_x86_64.cc", |
| ], |
| }, |
| }, |
| |
| target: { |
| android: { |
| // For atrace. |
| shared_libs: ["libcutils"], |
| static_libs: [ |
| "libz", |
| ], |
| }, |
| host: { |
| shared_libs: [ |
| "libz", |
| ], |
| }, |
| }, |
| generated_sources: ["art_dex2oat_operator_srcs"], |
| shared_libs: [ |
| "libbase", |
| ], |
| export_include_dirs: ["."], |
| |
| // For SHA-1 checksumming of build ID |
| static: { |
| whole_static_libs: ["libcrypto"], |
| }, |
| shared: { |
| shared_libs: ["libcrypto"], |
| }, |
| } |
| |
| cc_defaults { |
| name: "libart-dex2oat_static_base_defaults", |
| target: { |
| android: { |
| static_libs: ["libcutils"], |
| }, |
| }, |
| static_libs: [ |
| "libbase", |
| "libz", |
| ], |
| } |
| |
| gensrcs { |
| name: "art_dex2oat_operator_srcs", |
| cmd: "$(location generate_operator_out) art/dex2oat $(in) > $(out)", |
| tools: ["generate_operator_out"], |
| srcs: [ |
| "linker/image_writer.h", |
| ], |
| output_extension: "operator_out.cc", |
| } |
| |
| art_cc_library_static { |
| name: "libart-dex2oat", |
| defaults: ["libart-dex2oat-defaults"], |
| shared_libs: [ |
| "libart-compiler", |
| "libart-dexlayout", |
| "libart", |
| "libprofile", |
| ], |
| } |
| |
| cc_defaults { |
| name: "libart-dex2oat_static_defaults", |
| defaults: [ |
| "libart-dex2oat_static_base_defaults", |
| "libart_static_defaults", |
| "libprofile_static_defaults", |
| ], |
| static_libs: [ |
| "libart-compiler", |
| "libart-dexlayout", |
| "libart-dex2oat", |
| ], |
| } |
| |
| art_cc_library_static { |
| name: "libartd-dex2oat", |
| defaults: [ |
| "art_debug_defaults", |
| "libart-dex2oat-defaults", |
| ], |
| shared_libs: [ |
| "libartd-compiler", |
| "libartd-dexlayout", |
| "libartd", |
| "libprofiled", |
| ], |
| } |
| |
| cc_defaults { |
| name: "libartd-dex2oat_static_defaults", |
| defaults: [ |
| "libart-dex2oat_static_base_defaults", |
| "libartd_static_defaults", |
| "libprofiled_static_defaults", |
| ], |
| static_libs: [ |
| "libartd-compiler", |
| "libartd-dexlayout", |
| "libartd-dex2oat", |
| ], |
| } |
| |
| cc_library_headers { |
| name: "dex2oat_headers", |
| host_supported: true, |
| export_include_dirs: ["include"], |
| } |
| |
| cc_defaults { |
| name: "dex2oat-defaults", |
| host_supported: true, |
| defaults: ["art_defaults"], |
| srcs: [ |
| "dex2oat_options.cc", |
| "dex2oat.cc", |
| ], |
| |
| target: { |
| android: { |
| // Use the 32-bit version of dex2oat on devices. |
| compile_multilib: "prefer32", |
| }, |
| }, |
| header_libs: [ |
| "dex2oat_headers", |
| "art_cmdlineparser_headers", |
| ], |
| } |
| |
| cc_defaults { |
| name: "dex2oat-pgo-defaults", |
| pgo: { |
| instrumentation: true, |
| benchmarks: ["dex2oat"], |
| }, |
| target: { |
| android_arm64: { |
| pgo: { |
| profile_file: "art/dex2oat_arm_arm64.profdata", |
| }, |
| }, |
| android_arm: { |
| pgo: { |
| profile_file: "art/dex2oat_arm_arm64.profdata", |
| }, |
| }, |
| android_x86_64: { |
| pgo: { |
| profile_file: "art/dex2oat_x86_x86_64.profdata", |
| }, |
| }, |
| android_x86: { |
| pgo: { |
| profile_file: "art/dex2oat_x86_x86_64.profdata", |
| }, |
| }, |
| android_mips64: { |
| pgo: { |
| profile_file: "art/dex2oat_mips_mips64.profdata", |
| }, |
| }, |
| android_mips: { |
| pgo: { |
| profile_file: "art/dex2oat_mips_mips64.profdata", |
| }, |
| }, |
| }, |
| } |
| |
| art_cc_binary { |
| name: "dex2oat", |
| defaults: [ |
| "dex2oat-defaults", |
| "dex2oat-pgo-defaults", |
| ], |
| shared_libs: [ |
| "libprofile", |
| "libart-compiler", |
| "libart-dexlayout", |
| "libart", |
| "libdexfile", |
| "libartbase", |
| "libbase", |
| "libsigchain", |
| ], |
| static_libs: [ |
| "libart-dex2oat", |
| ], |
| |
| pgo: { |
| // Additional cflags just for dex2oat during PGO instrumentation |
| cflags: [ |
| // Ignore frame-size increase resulting from instrumentation. |
| "-Wno-frame-larger-than=", |
| "-DART_PGO_INSTRUMENTATION", |
| ], |
| }, |
| target: { |
| android: { |
| lto: { |
| thin: true, |
| }, |
| static_libs: [ |
| "libz", |
| ], |
| }, |
| host: { |
| shared_libs: [ |
| "libz", |
| ], |
| }, |
| }, |
| } |
| |
| art_cc_binary { |
| name: "dex2oatd", |
| defaults: [ |
| "art_debug_defaults", |
| "dex2oat-defaults", |
| ], |
| shared_libs: [ |
| "libprofiled", |
| "libartd-compiler", |
| "libartd-dexlayout", |
| "libartd", |
| "libdexfiled", |
| "libartbased", |
| "libbase", |
| "libsigchain", |
| ], |
| static_libs: [ |
| "libartd-dex2oat", |
| ], |
| target: { |
| android: { |
| static_libs: [ |
| "libz", |
| ], |
| }, |
| host: { |
| shared_libs: [ |
| "libz", |
| ], |
| }, |
| }, |
| } |
| |
| cc_defaults { |
| name: "dex2oats-defaults", |
| device_supported: false, |
| static_executable: true, |
| defaults: [ |
| "dex2oat-defaults", |
| ], |
| target: { |
| darwin: { |
| enabled: false, |
| }, |
| }, |
| ldflags: [ |
| // We need this because GC stress mode makes use of |
| // _Unwind_GetIP and _Unwind_Backtrace and the symbols are also |
| // defined in libgcc_eh.a(unwind-dw2.o) |
| // TODO: Having this is not ideal as it might obscure errors. |
| // Try to get rid of it. |
| "-z muldefs", |
| ], |
| static_libs: [ |
| "libbase", |
| "libsigchain_dummy", |
| "libz", |
| ], |
| } |
| |
| art_cc_binary { |
| name: "dex2oats", |
| defaults: [ |
| "dex2oats-defaults", |
| "libart_static_defaults", |
| "libart-compiler_static_defaults", |
| "libart-dexlayout_static_defaults", |
| "libartbase_static_defaults", |
| "libdexfile_static_defaults", |
| "libprofile_static_defaults", |
| "libart-dex2oat_static_defaults", |
| ], |
| } |
| |
| art_cc_binary { |
| name: "dex2oatds", |
| defaults: [ |
| "art_debug_defaults", |
| "dex2oats-defaults", |
| "libartd_static_defaults", |
| "libartd-compiler_static_defaults", |
| "libartd-dexlayout_static_defaults", |
| "libartbased_static_defaults", |
| "libdexfiled_static_defaults", |
| "libprofiled_static_defaults", |
| "libartd-dex2oat_static_defaults", |
| ], |
| target: { |
| linux_glibc_x86_64: { |
| use_clang_lld: true, |
| }, |
| }, |
| // b/79417743, oatdump 32-bit tests failed with clang lld |
| use_clang_lld: false, |
| } |
| |
| art_cc_test { |
| name: "art_dex2oat_tests", |
| defaults: [ |
| "art_gtest_defaults", |
| ], |
| srcs: [ |
| "dex2oat_test.cc", |
| "dex2oat_image_test.cc", |
| "linker/elf_writer_test.cc", |
| "linker/image_test.cc", |
| "linker/image_write_read_test.cc", |
| "linker/index_bss_mapping_encoder_test.cc", |
| "linker/multi_oat_relative_patcher_test.cc", |
| "linker/oat_writer_test.cc", |
| ], |
| |
| codegen: { |
| arm: { |
| srcs: [ |
| "linker/arm/relative_patcher_thumb2_test.cc", |
| ], |
| }, |
| arm64: { |
| srcs: [ |
| "linker/arm64/relative_patcher_arm64_test.cc", |
| ], |
| }, |
| mips: { |
| srcs: [ |
| "linker/mips/relative_patcher_mips_test.cc", |
| "linker/mips/relative_patcher_mips32r6_test.cc", |
| ], |
| }, |
| mips64: { |
| srcs: [ |
| "linker/mips64/relative_patcher_mips64_test.cc", |
| ], |
| }, |
| x86: { |
| srcs: [ |
| "linker/x86/relative_patcher_x86_test.cc", |
| ], |
| }, |
| x86_64: { |
| srcs: [ |
| "linker/x86_64/relative_patcher_x86_64_test.cc", |
| ], |
| }, |
| }, |
| |
| header_libs: ["dex2oat_headers"], |
| include_dirs: [ |
| "external/zlib", |
| ], |
| shared_libs: [ |
| "libartbased", |
| "libartd-compiler", |
| "libartd-dexlayout", |
| "libbase", |
| "libprofiled", |
| "libsigchain", |
| "libziparchive", |
| ], |
| static_libs: [ |
| "libartd-dex2oat", |
| ], |
| } |
