| /* |
| * =========================================================================== |
| * Common subroutines and data |
| * =========================================================================== |
| */ |
| |
| .text |
| .align 2 |
| |
| /* |
| * We've detected a condition that will result in an exception, but the exception |
| * has not yet been thrown. Just bail out to the reference interpreter to deal with it. |
| * TUNING: for consistency, we may want to just go ahead and handle these here. |
| */ |
| common_errDivideByZero: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| bl MterpLogDivideByZeroException |
| #endif |
| b MterpCommonFallback |
| |
| common_errArrayIndex: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| bl MterpLogArrayIndexException |
| #endif |
| b MterpCommonFallback |
| |
| common_errNegativeArraySize: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| bl MterpLogNegativeArraySizeException |
| #endif |
| b MterpCommonFallback |
| |
| common_errNoSuchMethod: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| bl MterpLogNoSuchMethodException |
| #endif |
| b MterpCommonFallback |
| |
| common_errNullObject: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| bl MterpLogNullObjectException |
| #endif |
| b MterpCommonFallback |
| |
| common_exceptionThrown: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| bl MterpLogExceptionThrownException |
| #endif |
| b MterpCommonFallback |
| |
| MterpSuspendFallback: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| ldr r2, [rSELF, #THREAD_FLAGS_OFFSET] |
| bl MterpLogSuspendFallback |
| #endif |
| b MterpCommonFallback |
| |
| /* |
| * If we're here, something is out of the ordinary. If there is a pending |
| * exception, handle it. Otherwise, roll back and retry with the reference |
| * interpreter. |
| */ |
| MterpPossibleException: |
| ldr r0, [rSELF, #THREAD_EXCEPTION_OFFSET] |
| cmp r0, #0 @ Exception pending? |
| beq MterpFallback @ If not, fall back to reference interpreter. |
| /* intentional fallthrough - handle pending exception. */ |
| /* |
| * On return from a runtime helper routine, we've found a pending exception. |
| * Can we handle it here - or need to bail out to caller? |
| * |
| */ |
| MterpException: |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| bl MterpHandleException @ (self, shadow_frame) |
| cmp r0, #0 |
| beq MterpExceptionReturn @ no local catch, back to caller. |
| ldr r0, [rFP, #OFF_FP_CODE_ITEM] |
| ldr r1, [rFP, #OFF_FP_DEX_PC] |
| ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] |
| add rPC, r0, #CODEITEM_INSNS_OFFSET |
| add rPC, rPC, r1, lsl #1 @ generate new dex_pc_ptr |
| /* Do we need to switch interpreters? */ |
| bl MterpShouldSwitchInterpreters |
| cmp r0, #0 |
| bne MterpFallback |
| /* resume execution at catch block */ |
| EXPORT_PC |
| FETCH_INST |
| GET_INST_OPCODE ip |
| GOTO_OPCODE ip |
| /* NOTE: no fallthrough */ |
| |
| /* |
| * Common handling for branches with support for Jit profiling. |
| * On entry: |
| * rINST <= signed offset |
| * rPROFILE <= signed hotness countdown (expanded to 32 bits) |
| * condition bits <= set to establish sign of offset (use "NoFlags" entry if not) |
| * |
| * We have quite a few different cases for branch profiling, OSR detection and |
| * suspend check support here. |
| * |
| * Taken backward branches: |
| * If profiling active, do hotness countdown and report if we hit zero. |
| * If in osr check mode, see if our target is a compiled loop header entry and do OSR if so. |
| * Is there a pending suspend request? If so, suspend. |
| * |
| * Taken forward branches and not-taken backward branches: |
| * If in osr check mode, see if our target is a compiled loop header entry and do OSR if so. |
| * |
| * Our most common case is expected to be a taken backward branch with active jit profiling, |
| * but no full OSR check and no pending suspend request. |
| * Next most common case is not-taken branch with no full OSR check. |
| * |
| */ |
| MterpCommonTakenBranchNoFlags: |
| cmp rINST, #0 |
| MterpCommonTakenBranch: |
| bgt .L_forward_branch @ don't add forward branches to hotness |
| /* |
| * We need to subtract 1 from positive values and we should not see 0 here, |
| * so we may use the result of the comparison with -1. |
| */ |
| #if JIT_CHECK_OSR != -1 |
| # error "JIT_CHECK_OSR must be -1." |
| #endif |
| cmp rPROFILE, #JIT_CHECK_OSR |
| beq .L_osr_check |
| subgts rPROFILE, #1 |
| beq .L_add_batch @ counted down to zero - report |
| .L_resume_backward_branch: |
| ldr lr, [rSELF, #THREAD_FLAGS_OFFSET] |
| REFRESH_IBASE |
| add r2, rINST, rINST @ r2<- byte offset |
| FETCH_ADVANCE_INST_RB r2 @ update rPC, load rINST |
| ands lr, #(THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST) |
| bne .L_suspend_request_pending |
| GET_INST_OPCODE ip @ extract opcode from rINST |
| GOTO_OPCODE ip @ jump to next instruction |
| |
| .L_suspend_request_pending: |
| EXPORT_PC |
| mov r0, rSELF |
| bl MterpSuspendCheck @ (self) |
| cmp r0, #0 |
| bne MterpFallback |
| REFRESH_IBASE @ might have changed during suspend |
| GET_INST_OPCODE ip @ extract opcode from rINST |
| GOTO_OPCODE ip @ jump to next instruction |
| |
| .L_no_count_backwards: |
| cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry? |
| bne .L_resume_backward_branch |
| .L_osr_check: |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| mov r2, rINST |
| EXPORT_PC |
| bl MterpMaybeDoOnStackReplacement @ (self, shadow_frame, offset) |
| cmp r0, #0 |
| bne MterpOnStackReplacement |
| b .L_resume_backward_branch |
| |
| .L_forward_branch: |
| cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry? |
| beq .L_check_osr_forward |
| .L_resume_forward_branch: |
| add r2, rINST, rINST @ r2<- byte offset |
| FETCH_ADVANCE_INST_RB r2 @ update rPC, load rINST |
| GET_INST_OPCODE ip @ extract opcode from rINST |
| GOTO_OPCODE ip @ jump to next instruction |
| |
| .L_check_osr_forward: |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| mov r2, rINST |
| EXPORT_PC |
| bl MterpMaybeDoOnStackReplacement @ (self, shadow_frame, offset) |
| cmp r0, #0 |
| bne MterpOnStackReplacement |
| b .L_resume_forward_branch |
| |
| .L_add_batch: |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| strh rPROFILE, [r1, #SHADOWFRAME_HOTNESS_COUNTDOWN_OFFSET] |
| ldr r0, [rFP, #OFF_FP_METHOD] |
| mov r2, rSELF |
| bl MterpAddHotnessBatch @ (method, shadow_frame, self) |
| mov rPROFILE, r0 @ restore new hotness countdown to rPROFILE |
| b .L_no_count_backwards |
| |
| /* |
| * Entered from the conditional branch handlers when OSR check request active on |
| * not-taken path. All Dalvik not-taken conditional branch offsets are 2. |
| */ |
| .L_check_not_taken_osr: |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| mov r2, #2 |
| EXPORT_PC |
| bl MterpMaybeDoOnStackReplacement @ (self, shadow_frame, offset) |
| cmp r0, #0 |
| bne MterpOnStackReplacement |
| FETCH_ADVANCE_INST 2 |
| GET_INST_OPCODE ip @ extract opcode from rINST |
| GOTO_OPCODE ip @ jump to next instruction |
| |
| /* |
| * On-stack replacement has happened, and now we've returned from the compiled method. |
| */ |
| MterpOnStackReplacement: |
| #if MTERP_LOGGING |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| mov r2, rINST |
| bl MterpLogOSR |
| #endif |
| mov r0, #1 @ Signal normal return |
| b MterpDone |
| |
| /* |
| * Bail out to reference interpreter. |
| */ |
| MterpFallback: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| mov r0, rSELF |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| bl MterpLogFallback |
| #endif |
| MterpCommonFallback: |
| mov r0, #0 @ signal retry with reference interpreter. |
| b MterpDone |
| |
| /* |
| * We pushed some registers on the stack in ExecuteMterpImpl, then saved |
| * SP and LR. Here we restore SP, restore the registers, and then restore |
| * LR to PC. |
| * |
| * On entry: |
| * uint32_t* rFP (should still be live, pointer to base of vregs) |
| */ |
| MterpExceptionReturn: |
| mov r0, #1 @ signal return to caller. |
| b MterpDone |
| MterpReturn: |
| ldr r2, [rFP, #OFF_FP_RESULT_REGISTER] |
| str r0, [r2] |
| str r1, [r2, #4] |
| mov r0, #1 @ signal return to caller. |
| MterpDone: |
| /* |
| * At this point, we expect rPROFILE to be non-zero. If negative, hotness is disabled or we're |
| * checking for OSR. If greater than zero, we might have unreported hotness to register |
| * (the difference between the ending rPROFILE and the cached hotness counter). rPROFILE |
| * should only reach zero immediately after a hotness decrement, and is then reset to either |
| * a negative special state or the new non-zero countdown value. |
| */ |
| cmp rPROFILE, #0 |
| bgt MterpProfileActive @ if > 0, we may have some counts to report. |
| ldmfd sp!, {r3-r10,fp,pc} @ restore 10 regs and return |
| |
| MterpProfileActive: |
| mov rINST, r0 @ stash return value |
| /* Report cached hotness counts */ |
| ldr r0, [rFP, #OFF_FP_METHOD] |
| add r1, rFP, #OFF_FP_SHADOWFRAME |
| mov r2, rSELF |
| strh rPROFILE, [r1, #SHADOWFRAME_HOTNESS_COUNTDOWN_OFFSET] |
| bl MterpAddHotnessBatch @ (method, shadow_frame, self) |
| mov r0, rINST @ restore return value |
| ldmfd sp!, {r3-r10,fp,pc} @ restore 10 regs and return |
| |
| .fnend |
| .size ExecuteMterpImpl, .-ExecuteMterpImpl |
| |
