/*
 * Copyright (C) 2011 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef ART_RUNTIME_LEB128_H_
#define ART_RUNTIME_LEB128_H_

#include "globals.h"
#include "utils.h"

namespace art {

// Reads an unsigned LEB128 value, updating the given pointer to point
// just past the end of the read value. This function tolerates
// non-zero high-order bits in the fifth encoded byte.
static inline uint32_t DecodeUnsignedLeb128(const uint8_t** data) {
  const uint8_t* ptr = *data;
  int result = *(ptr++);
  if (UNLIKELY(result > 0x7f)) {
    int cur = *(ptr++);
    result = (result & 0x7f) | ((cur & 0x7f) << 7);
    if (cur > 0x7f) {
      cur = *(ptr++);
      result |= (cur & 0x7f) << 14;
      if (cur > 0x7f) {
        cur = *(ptr++);
        result |= (cur & 0x7f) << 21;
        if (cur > 0x7f) {
          // Note: We don't check to see if cur is out of range here,
          // meaning we tolerate garbage in the four high-order bits.
          cur = *(ptr++);
          result |= cur << 28;
        }
      }
    }
  }
  *data = ptr;
  return static_cast<uint32_t>(result);
}

// Reads an unsigned LEB128 + 1 value. updating the given pointer to point
// just past the end of the read value. This function tolerates
// non-zero high-order bits in the fifth encoded byte.
// It is possible for this function to return -1.
static inline int32_t DecodeUnsignedLeb128P1(const uint8_t** data) {
  return DecodeUnsignedLeb128(data) - 1;
}

// Reads a signed LEB128 value, updating the given pointer to point
// just past the end of the read value. This function tolerates
// non-zero high-order bits in the fifth encoded byte.
static inline int32_t DecodeSignedLeb128(const uint8_t** data) {
  const uint8_t* ptr = *data;
  int32_t result = *(ptr++);
  if (result <= 0x7f) {
    result = (result << 25) >> 25;
  } else {
    int cur = *(ptr++);
    result = (result & 0x7f) | ((cur & 0x7f) << 7);
    if (cur <= 0x7f) {
      result = (result << 18) >> 18;
    } else {
      cur = *(ptr++);
      result |= (cur & 0x7f) << 14;
      if (cur <= 0x7f) {
        result = (result << 11) >> 11;
      } else {
        cur = *(ptr++);
        result |= (cur & 0x7f) << 21;
        if (cur <= 0x7f) {
          result = (result << 4) >> 4;
        } else {
          // Note: We don't check to see if cur is out of range here,
          // meaning we tolerate garbage in the four high-order bits.
          cur = *(ptr++);
          result |= cur << 28;
        }
      }
    }
  }
  *data = ptr;
  return result;
}

// Returns the number of bytes needed to encode the value in unsigned LEB128.
static inline uint32_t UnsignedLeb128Size(uint32_t data) {
  // bits_to_encode = (data != 0) ? 32 - CLZ(x) : 1  // 32 - CLZ(data | 1)
  // bytes = ceil(bits_to_encode / 7.0);             // (6 + bits_to_encode) / 7
  uint32_t x = 6 + 32 - CLZ(data | 1);
  // Division by 7 is done by (x * 37) >> 8 where 37 = ceil(256 / 7).
  // This works for 0 <= x < 256 / (7 * 37 - 256), i.e. 0 <= x <= 85.
  return (x * 37) >> 8;
}

// Returns the number of bytes needed to encode the value in unsigned LEB128.
static inline uint32_t SignedLeb128Size(int32_t data) {
  // Like UnsignedLeb128Size(), but we need one bit beyond the highest bit that differs from sign.
  data = data ^ (data >> 31);
  uint32_t x = 1 /* we need to encode the sign bit */ + 6 + 32 - CLZ(data | 1);
  return (x * 37) >> 8;
}

static inline uint8_t* EncodeUnsignedLeb128(uint8_t* dest, uint32_t value) {
  uint8_t out = value & 0x7f;
  value >>= 7;
  while (value != 0) {
    *dest++ = out | 0x80;
    out = value & 0x7f;
    value >>= 7;
  }
  *dest++ = out;
  return dest;
}

static inline uint8_t* EncodeSignedLeb128(uint8_t* dest, int32_t value) {
  uint32_t extra_bits = static_cast<uint32_t>(value ^ (value >> 31)) >> 6;
  uint8_t out = value & 0x7f;
  while (extra_bits != 0u) {
    *dest++ = out | 0x80;
    value >>= 7;
    out = value & 0x7f;
    extra_bits >>= 7;
  }
  *dest++ = out;
  return dest;
}

// An encoder with an API similar to vector<uint32_t> where the data is captured in ULEB128 format.
class Leb128EncodingVector {
 public:
  Leb128EncodingVector() {
  }

  void Reserve(uint32_t size) {
    data_.reserve(size);
  }

  void PushBackUnsigned(uint32_t value) {
    uint8_t out = value & 0x7f;
    value >>= 7;
    while (value != 0) {
      data_.push_back(out | 0x80);
      out = value & 0x7f;
      value >>= 7;
    }
    data_.push_back(out);
  }

  template<typename It>
  void InsertBackUnsigned(It cur, It end) {
    for (; cur != end; ++cur) {
      PushBackUnsigned(*cur);
    }
  }

  void PushBackSigned(int32_t value) {
    uint32_t extra_bits = static_cast<uint32_t>(value ^ (value >> 31)) >> 6;
    uint8_t out = value & 0x7f;
    while (extra_bits != 0u) {
      data_.push_back(out | 0x80);
      value >>= 7;
      out = value & 0x7f;
      extra_bits >>= 7;
    }
    data_.push_back(out);
  }

  template<typename It>
  void InsertBackSigned(It cur, It end) {
    for (; cur != end; ++cur) {
      PushBackSigned(*cur);
    }
  }

  const std::vector<uint8_t>& GetData() const {
    return data_;
  }

 private:
  std::vector<uint8_t> data_;

  DISALLOW_COPY_AND_ASSIGN(Leb128EncodingVector);
};

}  // namespace art

#endif  // ART_RUNTIME_LEB128_H_