| /* | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/usb.h> | |
| #include <linux/usb/audio.h> | |
| #include <sound/control.h> | |
| #include <sound/core.h> | |
| #include <sound/info.h> | |
| #include <sound/pcm.h> | |
| #include "usbaudio.h" | |
| #include "card.h" | |
| #include "mixer.h" | |
| #include "mixer_quirks.h" | |
| #include "midi.h" | |
| #include "quirks.h" | |
| #include "helper.h" | |
| #include "endpoint.h" | |
| #include "pcm.h" | |
| #include "clock.h" | |
| #include "stream.h" | |
| /* | |
| * handle the quirks for the contained interfaces | |
| */ | |
| static int create_composite_quirk(struct snd_usb_audio *chip, | |
| struct usb_interface *iface, | |
| struct usb_driver *driver, | |
| const struct snd_usb_audio_quirk *quirk) | |
| { | |
| int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber; | |
| int err; | |
| for (quirk = quirk->data; quirk->ifnum >= 0; ++quirk) { | |
| iface = usb_ifnum_to_if(chip->dev, quirk->ifnum); | |
| if (!iface) | |
| continue; | |
| if (quirk->ifnum != probed_ifnum && | |
| usb_interface_claimed(iface)) | |
| continue; | |
| err = snd_usb_create_quirk(chip, iface, driver, quirk); | |
| if (err < 0) | |
| return err; | |
| if (quirk->ifnum != probed_ifnum) | |
| usb_driver_claim_interface(driver, iface, (void *)-1L); | |
| } | |
| return 0; | |
| } | |
| static int ignore_interface_quirk(struct snd_usb_audio *chip, | |
| struct usb_interface *iface, | |
| struct usb_driver *driver, | |
| const struct snd_usb_audio_quirk *quirk) | |
| { | |
| return 0; | |
| } | |
| /* | |
| * Allow alignment on audio sub-slot (channel samples) rather than | |
| * on audio slots (audio frames) | |
| */ | |
| static int create_align_transfer_quirk(struct snd_usb_audio *chip, | |
| struct usb_interface *iface, | |
| struct usb_driver *driver, | |
| const struct snd_usb_audio_quirk *quirk) | |
| { | |
| chip->txfr_quirk = 1; | |
| return 1; /* Continue with creating streams and mixer */ | |
| } | |
| static int create_any_midi_quirk(struct snd_usb_audio *chip, | |
| struct usb_interface *intf, | |
| struct usb_driver *driver, | |
| const struct snd_usb_audio_quirk *quirk) | |
| { | |
| return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk); | |
| } | |
| /* | |
| * create a stream for an interface with proper descriptors | |
| */ | |
| static int create_standard_audio_quirk(struct snd_usb_audio *chip, | |
| struct usb_interface *iface, | |
| struct usb_driver *driver, | |
| const struct snd_usb_audio_quirk *quirk) | |
| { | |
| struct usb_host_interface *alts; | |
| struct usb_interface_descriptor *altsd; | |
| int err; | |
| alts = &iface->altsetting[0]; | |
| altsd = get_iface_desc(alts); | |
| err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber); | |
| if (err < 0) { | |
| snd_printk(KERN_ERR "cannot setup if %d: error %d\n", | |
| altsd->bInterfaceNumber, err); | |
| return err; | |
| } | |
| /* reset the current interface */ | |
| usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0); | |
| return 0; | |
| } | |
| /* | |
| * create a stream for an endpoint/altsetting without proper descriptors | |
| */ | |
| static int create_fixed_stream_quirk(struct snd_usb_audio *chip, | |
| struct usb_interface *iface, | |
| struct usb_driver *driver, | |
| const struct snd_usb_audio_quirk *quirk) | |
| { | |
| struct audioformat *fp; | |
| struct usb_host_interface *alts; | |
| int stream, err; | |
| unsigned *rate_table = NULL; | |
| fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL); | |
| if (!fp) { | |
| snd_printk(KERN_ERR "cannot memdup\n"); | |
| return -ENOMEM; | |
| } | |
| INIT_LIST_HEAD(&fp->list); | |
| if (fp->nr_rates > MAX_NR_RATES) { | |
| kfree(fp); | |
| return -EINVAL; | |
| } | |
| if (fp->nr_rates > 0) { | |
| rate_table = kmemdup(fp->rate_table, | |
| sizeof(int) * fp->nr_rates, GFP_KERNEL); | |
| if (!rate_table) { | |
| kfree(fp); | |
| return -ENOMEM; | |
| } | |
| fp->rate_table = rate_table; | |
| } | |
| stream = (fp->endpoint & USB_DIR_IN) | |
| ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; | |
| err = snd_usb_add_audio_stream(chip, stream, fp); | |
| if (err < 0) | |
| goto error; | |
| if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber || | |
| fp->altset_idx >= iface->num_altsetting) { | |
| err = -EINVAL; | |
| goto error; | |
| } | |
| alts = &iface->altsetting[fp->altset_idx]; | |
| if (fp->datainterval == 0) | |
| fp->datainterval = snd_usb_parse_datainterval(chip, alts); | |
| if (fp->maxpacksize == 0) | |
| fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); | |
| usb_set_interface(chip->dev, fp->iface, 0); | |
| snd_usb_init_pitch(chip, fp->iface, alts, fp); | |
| snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max); | |
| return 0; | |
| error: | |
| list_del(&fp->list); /* unlink for avoiding double-free */ | |
| kfree(fp); | |
| kfree(rate_table); | |
| return err; | |
| } | |
| /* | |
| * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface. | |
| * The only way to detect the sample rate is by looking at wMaxPacketSize. | |
| */ | |
| static int create_uaxx_quirk(struct snd_usb_audio *chip, | |
| struct usb_interface *iface, | |
| struct usb_driver *driver, | |
| const struct snd_usb_audio_quirk *quirk) | |
| { | |
| static const struct audioformat ua_format = { | |
| .formats = SNDRV_PCM_FMTBIT_S24_3LE, | |
| .channels = 2, | |
| .fmt_type = UAC_FORMAT_TYPE_I, | |
| .altsetting = 1, | |
| .altset_idx = 1, | |
| .rates = SNDRV_PCM_RATE_CONTINUOUS, | |
| }; | |
| struct usb_host_interface *alts; | |
| struct usb_interface_descriptor *altsd; | |
| struct audioformat *fp; | |
| int stream, err; | |
| /* both PCM and MIDI interfaces have 2 or more altsettings */ | |
| if (iface->num_altsetting < 2) | |
| return -ENXIO; | |
| alts = &iface->altsetting[1]; | |
| altsd = get_iface_desc(alts); | |
| if (altsd->bNumEndpoints == 2) { | |
| static const struct snd_usb_midi_endpoint_info ua700_ep = { | |
| .out_cables = 0x0003, | |
| .in_cables = 0x0003 | |
| }; | |
| static const struct snd_usb_audio_quirk ua700_quirk = { | |
| .type = QUIRK_MIDI_FIXED_ENDPOINT, | |
| .data = &ua700_ep | |
| }; | |
| static const struct snd_usb_midi_endpoint_info uaxx_ep = { | |
| .out_cables = 0x0001, | |
| .in_cables = 0x0001 | |
| }; | |
| static const struct snd_usb_audio_quirk uaxx_quirk = { | |
| .type = QUIRK_MIDI_FIXED_ENDPOINT, | |
| .data = &uaxx_ep | |
| }; | |
| const struct snd_usb_audio_quirk *quirk = | |
| chip->usb_id == USB_ID(0x0582, 0x002b) | |
| ? &ua700_quirk : &uaxx_quirk; | |
| return snd_usbmidi_create(chip->card, iface, | |
| &chip->midi_list, quirk); | |
| } | |
| if (altsd->bNumEndpoints != 1) | |
| return -ENXIO; | |
| fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL); | |
| if (!fp) | |
| return -ENOMEM; | |
| fp->iface = altsd->bInterfaceNumber; | |
| fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress; | |
| fp->ep_attr = get_endpoint(alts, 0)->bmAttributes; | |
| fp->datainterval = 0; | |
| fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); | |
| INIT_LIST_HEAD(&fp->list); | |
| switch (fp->maxpacksize) { | |
| case 0x120: | |
| fp->rate_max = fp->rate_min = 44100; | |
| break; | |
| case 0x138: | |
| case 0x140: | |
| fp->rate_max = fp->rate_min = 48000; | |
| break; | |
| case 0x258: | |
| case 0x260: | |
| fp->rate_max = fp->rate_min = 96000; | |
| break; | |
| default: | |
| snd_printk(KERN_ERR "unknown sample rate\n"); | |
| kfree(fp); | |
| return -ENXIO; | |
| } | |
| stream = (fp->endpoint & USB_DIR_IN) | |
| ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; | |
| err = snd_usb_add_audio_stream(chip, stream, fp); | |
| if (err < 0) { | |
| list_del(&fp->list); /* unlink for avoiding double-free */ | |
| kfree(fp); | |
| return err; | |
| } | |
| usb_set_interface(chip->dev, fp->iface, 0); | |
| return 0; | |
| } | |
| /* | |
| * Create a standard mixer for the specified interface. | |
| */ | |
| static int create_standard_mixer_quirk(struct snd_usb_audio *chip, | |
| struct usb_interface *iface, | |
| struct usb_driver *driver, | |
| const struct snd_usb_audio_quirk *quirk) | |
| { | |
| if (quirk->ifnum < 0) | |
| return 0; | |
| return snd_usb_create_mixer(chip, quirk->ifnum, 0); | |
| } | |
| /* | |
| * audio-interface quirks | |
| * | |
| * returns zero if no standard audio/MIDI parsing is needed. | |
| * returns a positive value if standard audio/midi interfaces are parsed | |
| * after this. | |
| * returns a negative value at error. | |
| */ | |
| int snd_usb_create_quirk(struct snd_usb_audio *chip, | |
| struct usb_interface *iface, | |
| struct usb_driver *driver, | |
| const struct snd_usb_audio_quirk *quirk) | |
| { | |
| typedef int (*quirk_func_t)(struct snd_usb_audio *, | |
| struct usb_interface *, | |
| struct usb_driver *, | |
| const struct snd_usb_audio_quirk *); | |
| static const quirk_func_t quirk_funcs[] = { | |
| [QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk, | |
| [QUIRK_COMPOSITE] = create_composite_quirk, | |
| [QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk, | |
| [QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk, | |
| [QUIRK_MIDI_YAMAHA] = create_any_midi_quirk, | |
| [QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk, | |
| [QUIRK_MIDI_NOVATION] = create_any_midi_quirk, | |
| [QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk, | |
| [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk, | |
| [QUIRK_MIDI_CME] = create_any_midi_quirk, | |
| [QUIRK_MIDI_AKAI] = create_any_midi_quirk, | |
| [QUIRK_MIDI_FTDI] = create_any_midi_quirk, | |
| [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, | |
| [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, | |
| [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk, | |
| [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk, | |
| [QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk, | |
| }; | |
| if (quirk->type < QUIRK_TYPE_COUNT) { | |
| return quirk_funcs[quirk->type](chip, iface, driver, quirk); | |
| } else { | |
| snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type); | |
| return -ENXIO; | |
| } | |
| } | |
| /* | |
| * boot quirks | |
| */ | |
| #define EXTIGY_FIRMWARE_SIZE_OLD 794 | |
| #define EXTIGY_FIRMWARE_SIZE_NEW 483 | |
| static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf) | |
| { | |
| struct usb_host_config *config = dev->actconfig; | |
| int err; | |
| if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD || | |
| le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) { | |
| snd_printdd("sending Extigy boot sequence...\n"); | |
| /* Send message to force it to reconnect with full interface. */ | |
| err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0), | |
| 0x10, 0x43, 0x0001, 0x000a, NULL, 0); | |
| if (err < 0) snd_printdd("error sending boot message: %d\n", err); | |
| err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, | |
| &dev->descriptor, sizeof(dev->descriptor)); | |
| config = dev->actconfig; | |
| if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err); | |
| err = usb_reset_configuration(dev); | |
| if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err); | |
| snd_printdd("extigy_boot: new boot length = %d\n", | |
| le16_to_cpu(get_cfg_desc(config)->wTotalLength)); | |
| return -ENODEV; /* quit this anyway */ | |
| } | |
| return 0; | |
| } | |
| static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev) | |
| { | |
| u8 buf = 1; | |
| snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a, | |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, | |
| 0, 0, &buf, 1); | |
| if (buf == 0) { | |
| snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29, | |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, | |
| 1, 2000, NULL, 0); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev) | |
| { | |
| int err; | |
| if (dev->actconfig->desc.bConfigurationValue == 1) { | |
| snd_printk(KERN_INFO "usb-audio: " | |
| "Fast Track Pro switching to config #2\n"); | |
| /* This function has to be available by the usb core module. | |
| * if it is not avialable the boot quirk has to be left out | |
| * and the configuration has to be set by udev or hotplug | |
| * rules | |
| */ | |
| err = usb_driver_set_configuration(dev, 2); | |
| if (err < 0) | |
| snd_printdd("error usb_driver_set_configuration: %d\n", | |
| err); | |
| /* Always return an error, so that we stop creating a device | |
| that will just be destroyed and recreated with a new | |
| configuration */ | |
| return -ENODEV; | |
| } else | |
| snd_printk(KERN_INFO "usb-audio: Fast Track Pro config OK\n"); | |
| return 0; | |
| } | |
| /* | |
| * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely | |
| * documented in the device's data sheet. | |
| */ | |
| static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value) | |
| { | |
| u8 buf[4]; | |
| buf[0] = 0x20; | |
| buf[1] = value & 0xff; | |
| buf[2] = (value >> 8) & 0xff; | |
| buf[3] = reg; | |
| return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, | |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, | |
| 0, 0, &buf, 4); | |
| } | |
| static int snd_usb_cm106_boot_quirk(struct usb_device *dev) | |
| { | |
| /* | |
| * Enable line-out driver mode, set headphone source to front | |
| * channels, enable stereo mic. | |
| */ | |
| return snd_usb_cm106_write_int_reg(dev, 2, 0x8004); | |
| } | |
| /* | |
| * C-Media CM6206 is based on CM106 with two additional | |
| * registers that are not documented in the data sheet. | |
| * Values here are chosen based on sniffing USB traffic | |
| * under Windows. | |
| */ | |
| static int snd_usb_cm6206_boot_quirk(struct usb_device *dev) | |
| { | |
| int err = 0, reg; | |
| int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000}; | |
| for (reg = 0; reg < ARRAY_SIZE(val); reg++) { | |
| err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]); | |
| if (err < 0) | |
| return err; | |
| } | |
| return err; | |
| } | |
| /* | |
| * Novation Twitch DJ controller | |
| */ | |
| static int snd_usb_twitch_boot_quirk(struct usb_device *dev) | |
| { | |
| /* preemptively set up the device because otherwise the | |
| * raw MIDI endpoints are not active */ | |
| usb_set_interface(dev, 0, 1); | |
| return 0; | |
| } | |
| /* | |
| * This call will put the synth in "USB send" mode, i.e it will send MIDI | |
| * messages through USB (this is disabled at startup). The synth will | |
| * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB | |
| * sign on its LCD. Values here are chosen based on sniffing USB traffic | |
| * under Windows. | |
| */ | |
| static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev) | |
| { | |
| int err, actual_length; | |
| /* "midi send" enable */ | |
| static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 }; | |
| void *buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf, | |
| ARRAY_SIZE(seq), &actual_length, 1000); | |
| kfree(buf); | |
| if (err < 0) | |
| return err; | |
| return 0; | |
| } | |
| /* | |
| * Some sound cards from Native Instruments are in fact compliant to the USB | |
| * audio standard of version 2 and other approved USB standards, even though | |
| * they come up as vendor-specific device when first connected. | |
| * | |
| * However, they can be told to come up with a new set of descriptors | |
| * upon their next enumeration, and the interfaces announced by the new | |
| * descriptors will then be handled by the kernel's class drivers. As the | |
| * product ID will also change, no further checks are required. | |
| */ | |
| static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) | |
| { | |
| int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
| 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE, | |
| 1, 0, NULL, 0, 1000); | |
| if (ret < 0) | |
| return ret; | |
| usb_reset_device(dev); | |
| /* return -EAGAIN, so the creation of an audio interface for this | |
| * temporary device is aborted. The device will reconnect with a | |
| * new product ID */ | |
| return -EAGAIN; | |
| } | |
| static void mbox2_setup_48_24_magic(struct usb_device *dev) | |
| { | |
| u8 srate[3]; | |
| u8 temp[12]; | |
| /* Choose 48000Hz permanently */ | |
| srate[0] = 0x80; | |
| srate[1] = 0xbb; | |
| srate[2] = 0x00; | |
| /* Send the magic! */ | |
| snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), | |
| 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003); | |
| snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), | |
| 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003); | |
| snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), | |
| 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003); | |
| snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), | |
| 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003); | |
| return; | |
| } | |
| /* Digidesign Mbox 2 needs to load firmware onboard | |
| * and driver must wait a few seconds for initialisation. | |
| */ | |
| #define MBOX2_FIRMWARE_SIZE 646 | |
| #define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */ | |
| #define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */ | |
| static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) | |
| { | |
| struct usb_host_config *config = dev->actconfig; | |
| int err; | |
| u8 bootresponse[0x12]; | |
| int fwsize; | |
| int count; | |
| fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength); | |
| if (fwsize != MBOX2_FIRMWARE_SIZE) { | |
| snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize); | |
| return -ENODEV; | |
| } | |
| snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n"); | |
| count = 0; | |
| bootresponse[0] = MBOX2_BOOT_LOADING; | |
| while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10)) { | |
| msleep(500); /* 0.5 second delay */ | |
| snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), | |
| /* Control magic - load onboard firmware */ | |
| 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012); | |
| if (bootresponse[0] == MBOX2_BOOT_READY) | |
| break; | |
| snd_printd("usb-audio: device not ready, resending boot sequence...\n"); | |
| count++; | |
| } | |
| if (bootresponse[0] != MBOX2_BOOT_READY) { | |
| snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]); | |
| return -ENODEV; | |
| } | |
| snd_printdd("usb-audio: device initialised!\n"); | |
| err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, | |
| &dev->descriptor, sizeof(dev->descriptor)); | |
| config = dev->actconfig; | |
| if (err < 0) | |
| snd_printd("error usb_get_descriptor: %d\n", err); | |
| err = usb_reset_configuration(dev); | |
| if (err < 0) | |
| snd_printd("error usb_reset_configuration: %d\n", err); | |
| snd_printdd("mbox2_boot: new boot length = %d\n", | |
| le16_to_cpu(get_cfg_desc(config)->wTotalLength)); | |
| mbox2_setup_48_24_magic(dev); | |
| snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz"); | |
| return 0; /* Successful boot */ | |
| } | |
| /* | |
| * Setup quirks | |
| */ | |
| #define MAUDIO_SET 0x01 /* parse device_setup */ | |
| #define MAUDIO_SET_COMPATIBLE 0x80 /* use only "win-compatible" interfaces */ | |
| #define MAUDIO_SET_DTS 0x02 /* enable DTS Digital Output */ | |
| #define MAUDIO_SET_96K 0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */ | |
| #define MAUDIO_SET_24B 0x08 /* 24bits sample if set, 16bits otherwise */ | |
| #define MAUDIO_SET_DI 0x10 /* enable Digital Input */ | |
| #define MAUDIO_SET_MASK 0x1f /* bit mask for setup value */ | |
| #define MAUDIO_SET_24B_48K_DI 0x19 /* 24bits+48KHz+Digital Input */ | |
| #define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48KHz+No Digital Input */ | |
| #define MAUDIO_SET_16B_48K_DI 0x11 /* 16bits+48KHz+Digital Input */ | |
| #define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48KHz+No Digital Input */ | |
| static int quattro_skip_setting_quirk(struct snd_usb_audio *chip, | |
| int iface, int altno) | |
| { | |
| /* Reset ALL ifaces to 0 altsetting. | |
| * Call it for every possible altsetting of every interface. | |
| */ | |
| usb_set_interface(chip->dev, iface, 0); | |
| if (chip->setup & MAUDIO_SET) { | |
| if (chip->setup & MAUDIO_SET_COMPATIBLE) { | |
| if (iface != 1 && iface != 2) | |
| return 1; /* skip all interfaces but 1 and 2 */ | |
| } else { | |
| unsigned int mask; | |
| if (iface == 1 || iface == 2) | |
| return 1; /* skip interfaces 1 and 2 */ | |
| if ((chip->setup & MAUDIO_SET_96K) && altno != 1) | |
| return 1; /* skip this altsetting */ | |
| mask = chip->setup & MAUDIO_SET_MASK; | |
| if (mask == MAUDIO_SET_24B_48K_DI && altno != 2) | |
| return 1; /* skip this altsetting */ | |
| if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3) | |
| return 1; /* skip this altsetting */ | |
| if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 4) | |
| return 1; /* skip this altsetting */ | |
| } | |
| } | |
| snd_printdd(KERN_INFO | |
| "using altsetting %d for interface %d config %d\n", | |
| altno, iface, chip->setup); | |
| return 0; /* keep this altsetting */ | |
| } | |
| static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip, | |
| int iface, | |
| int altno) | |
| { | |
| /* Reset ALL ifaces to 0 altsetting. | |
| * Call it for every possible altsetting of every interface. | |
| */ | |
| usb_set_interface(chip->dev, iface, 0); | |
| if (chip->setup & MAUDIO_SET) { | |
| unsigned int mask; | |
| if ((chip->setup & MAUDIO_SET_DTS) && altno != 6) | |
| return 1; /* skip this altsetting */ | |
| if ((chip->setup & MAUDIO_SET_96K) && altno != 1) | |
| return 1; /* skip this altsetting */ | |
| mask = chip->setup & MAUDIO_SET_MASK; | |
| if (mask == MAUDIO_SET_24B_48K_DI && altno != 2) | |
| return 1; /* skip this altsetting */ | |
| if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3) | |
| return 1; /* skip this altsetting */ | |
| if (mask == MAUDIO_SET_16B_48K_DI && altno != 4) | |
| return 1; /* skip this altsetting */ | |
| if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 5) | |
| return 1; /* skip this altsetting */ | |
| } | |
| return 0; /* keep this altsetting */ | |
| } | |
| static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip, | |
| int iface, int altno) | |
| { | |
| /* Reset ALL ifaces to 0 altsetting. | |
| * Call it for every possible altsetting of every interface. | |
| */ | |
| usb_set_interface(chip->dev, iface, 0); | |
| /* possible configuration where both inputs and only one output is | |
| *used is not supported by the current setup | |
| */ | |
| if (chip->setup & (MAUDIO_SET | MAUDIO_SET_24B)) { | |
| if (chip->setup & MAUDIO_SET_96K) { | |
| if (altno != 3 && altno != 6) | |
| return 1; | |
| } else if (chip->setup & MAUDIO_SET_DI) { | |
| if (iface == 4) | |
| return 1; /* no analog input */ | |
| if (altno != 2 && altno != 5) | |
| return 1; /* enable only altsets 2 and 5 */ | |
| } else { | |
| if (iface == 5) | |
| return 1; /* disable digialt input */ | |
| if (altno != 2 && altno != 5) | |
| return 1; /* enalbe only altsets 2 and 5 */ | |
| } | |
| } else { | |
| /* keep only 16-Bit mode */ | |
| if (altno != 1) | |
| return 1; | |
| } | |
| snd_printdd(KERN_INFO | |
| "using altsetting %d for interface %d config %d\n", | |
| altno, iface, chip->setup); | |
| return 0; /* keep this altsetting */ | |
| } | |
| int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip, | |
| int iface, | |
| int altno) | |
| { | |
| /* audiophile usb: skip altsets incompatible with device_setup */ | |
| if (chip->usb_id == USB_ID(0x0763, 0x2003)) | |
| return audiophile_skip_setting_quirk(chip, iface, altno); | |
| /* quattro usb: skip altsets incompatible with device_setup */ | |
| if (chip->usb_id == USB_ID(0x0763, 0x2001)) | |
| return quattro_skip_setting_quirk(chip, iface, altno); | |
| /* fasttrackpro usb: skip altsets incompatible with device_setup */ | |
| if (chip->usb_id == USB_ID(0x0763, 0x2012)) | |
| return fasttrackpro_skip_setting_quirk(chip, iface, altno); | |
| return 0; | |
| } | |
| int snd_usb_apply_boot_quirk(struct usb_device *dev, | |
| struct usb_interface *intf, | |
| const struct snd_usb_audio_quirk *quirk) | |
| { | |
| u32 id = USB_ID(le16_to_cpu(dev->descriptor.idVendor), | |
| le16_to_cpu(dev->descriptor.idProduct)); | |
| switch (id) { | |
| case USB_ID(0x041e, 0x3000): | |
| /* SB Extigy needs special boot-up sequence */ | |
| /* if more models come, this will go to the quirk list. */ | |
| return snd_usb_extigy_boot_quirk(dev, intf); | |
| case USB_ID(0x041e, 0x3020): | |
| /* SB Audigy 2 NX needs its own boot-up magic, too */ | |
| return snd_usb_audigy2nx_boot_quirk(dev); | |
| case USB_ID(0x10f5, 0x0200): | |
| /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */ | |
| return snd_usb_cm106_boot_quirk(dev); | |
| case USB_ID(0x0d8c, 0x0102): | |
| /* C-Media CM6206 / CM106-Like Sound Device */ | |
| case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */ | |
| return snd_usb_cm6206_boot_quirk(dev); | |
| case USB_ID(0x0dba, 0x3000): | |
| /* Digidesign Mbox 2 */ | |
| return snd_usb_mbox2_boot_quirk(dev); | |
| case USB_ID(0x1235, 0x0018): | |
| /* Focusrite Novation Twitch */ | |
| return snd_usb_twitch_boot_quirk(dev); | |
| case USB_ID(0x133e, 0x0815): | |
| /* Access Music VirusTI Desktop */ | |
| return snd_usb_accessmusic_boot_quirk(dev); | |
| case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */ | |
| case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */ | |
| case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */ | |
| return snd_usb_nativeinstruments_boot_quirk(dev); | |
| case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */ | |
| return snd_usb_fasttrackpro_boot_quirk(dev); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * check if the device uses big-endian samples | |
| */ | |
| int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp) | |
| { | |
| /* it depends on altsetting whether the device is big-endian or not */ | |
| switch (chip->usb_id) { | |
| case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */ | |
| if (fp->altsetting == 2 || fp->altsetting == 3 || | |
| fp->altsetting == 5 || fp->altsetting == 6) | |
| return 1; | |
| break; | |
| case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ | |
| if (chip->setup == 0x00 || | |
| fp->altsetting == 1 || fp->altsetting == 2 || | |
| fp->altsetting == 3) | |
| return 1; | |
| break; | |
| case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro */ | |
| if (fp->altsetting == 2 || fp->altsetting == 3 || | |
| fp->altsetting == 5 || fp->altsetting == 6) | |
| return 1; | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device, | |
| * not for interface. | |
| */ | |
| enum { | |
| EMU_QUIRK_SR_44100HZ = 0, | |
| EMU_QUIRK_SR_48000HZ, | |
| EMU_QUIRK_SR_88200HZ, | |
| EMU_QUIRK_SR_96000HZ, | |
| EMU_QUIRK_SR_176400HZ, | |
| EMU_QUIRK_SR_192000HZ | |
| }; | |
| static void set_format_emu_quirk(struct snd_usb_substream *subs, | |
| struct audioformat *fmt) | |
| { | |
| unsigned char emu_samplerate_id = 0; | |
| /* When capture is active | |
| * sample rate shouldn't be changed | |
| * by playback substream | |
| */ | |
| if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) { | |
| if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1) | |
| return; | |
| } | |
| switch (fmt->rate_min) { | |
| case 48000: | |
| emu_samplerate_id = EMU_QUIRK_SR_48000HZ; | |
| break; | |
| case 88200: | |
| emu_samplerate_id = EMU_QUIRK_SR_88200HZ; | |
| break; | |
| case 96000: | |
| emu_samplerate_id = EMU_QUIRK_SR_96000HZ; | |
| break; | |
| case 176400: | |
| emu_samplerate_id = EMU_QUIRK_SR_176400HZ; | |
| break; | |
| case 192000: | |
| emu_samplerate_id = EMU_QUIRK_SR_192000HZ; | |
| break; | |
| default: | |
| emu_samplerate_id = EMU_QUIRK_SR_44100HZ; | |
| break; | |
| } | |
| snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id); | |
| subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0; | |
| } | |
| void snd_usb_set_format_quirk(struct snd_usb_substream *subs, | |
| struct audioformat *fmt) | |
| { | |
| switch (subs->stream->chip->usb_id) { | |
| case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */ | |
| case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */ | |
| case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */ | |
| case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */ | |
| set_format_emu_quirk(subs, fmt); | |
| break; | |
| } | |
| } | |
| void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep) | |
| { | |
| /* | |
| * "Playback Design" products send bogus feedback data at the start | |
| * of the stream. Ignore them. | |
| */ | |
| if ((le16_to_cpu(ep->chip->dev->descriptor.idVendor) == 0x23ba) && | |
| ep->type == SND_USB_ENDPOINT_TYPE_SYNC) | |
| ep->skip_packets = 4; | |
| /* | |
| * M-Audio Fast Track C400/C600 - when packets are not skipped, real | |
| * world latency varies by approx. +/- 50 frames (at 96KHz) each time | |
| * the stream is (re)started. When skipping packets 16 at endpoint | |
| * start up, the real world latency is stable within +/- 1 frame (also | |
| * across power cycles). | |
| */ | |
| if ((ep->chip->usb_id == USB_ID(0x0763, 0x2030) || | |
| ep->chip->usb_id == USB_ID(0x0763, 0x2031)) && | |
| ep->type == SND_USB_ENDPOINT_TYPE_DATA) | |
| ep->skip_packets = 16; | |
| } | |
| void snd_usb_set_interface_quirk(struct usb_device *dev) | |
| { | |
| /* | |
| * "Playback Design" products need a 50ms delay after setting the | |
| * USB interface. | |
| */ | |
| if (le16_to_cpu(dev->descriptor.idVendor) == 0x23ba) | |
| mdelay(50); | |
| } | |
| void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe, | |
| __u8 request, __u8 requesttype, __u16 value, | |
| __u16 index, void *data, __u16 size) | |
| { | |
| /* | |
| * "Playback Design" products need a 20ms delay after each | |
| * class compliant request | |
| */ | |
| if ((le16_to_cpu(dev->descriptor.idVendor) == 0x23ba) && | |
| (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) | |
| mdelay(20); | |
| } | |
| /* | |
| * snd_usb_interface_dsd_format_quirks() is called from format.c to | |
| * augment the PCM format bit-field for DSD types. The UAC standards | |
| * don't have a designated bit field to denote DSD-capable interfaces, | |
| * hence all hardware that is known to support this format has to be | |
| * listed here. | |
| */ | |
| u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip, | |
| struct audioformat *fp, | |
| unsigned int sample_bytes) | |
| { | |
| /* Playback Designs */ | |
| if (le16_to_cpu(chip->dev->descriptor.idVendor) == 0x23ba) { | |
| switch (fp->altsetting) { | |
| case 1: | |
| fp->dsd_dop = true; | |
| return SNDRV_PCM_FMTBIT_DSD_U16_LE; | |
| case 2: | |
| fp->dsd_bitrev = true; | |
| return SNDRV_PCM_FMTBIT_DSD_U8; | |
| case 3: | |
| fp->dsd_bitrev = true; | |
| return SNDRV_PCM_FMTBIT_DSD_U16_LE; | |
| } | |
| } | |
| return 0; | |
| } |