drivers/net/wireless/bcmdhd/Makefile - kernel/x86_64 - Git at Google

 # bcmdhd
 #####################
 # SDIO Basic feature
 #####################

 DHDCFLAGS += -Wall -Wstrict-prototypes -Dlinux -DLINUX -DBCMDRIVER            \
 	-DBCMDONGLEHOST -DUNRELEASEDCHIP -DBCMDMA32 -DBCMFILEIMAGE            \
 	-DDHDTHREAD -DSHOW_EVENTS -DBCMDBG -DWLP2P                            \
 	-DWIFI_ACT_FRAME -DARP_OFFLOAD_SUPPORT                                \
 	-DKEEP_ALIVE -DCSCAN -DPKT_FILTER_SUPPORT                             \
 	-DEMBEDDED_PLATFORM -DPNO_SUPPORT  -DSHOW_LOGTRACE                    \
 	-DDHD_DONOT_FORWARD_BCMEVENT_AS_NETWORK_PKT                           \
 	-DCUSTOMER_HW2 -DGET_CUSTOM_MAC_ENABLE

 #################
 # Common feature
 #################
 DHDCFLAGS += -DWL_CFG80211
 # Print out kernel panic point of file and line info when assertion happened
 DHDCFLAGS += -DBCMASSERT_LOG

 # keepalive
 DHDCFLAGS += -DCUSTOM_KEEP_ALIVE_SETTING=28000

 DHDCFLAGS += -DVSDB

 # For p2p connection issue
 DHDCFLAGS += -DWL_SCB_TIMEOUT=10


 # TDLS enable
 DHDCFLAGS += -DWLTDLS -DWLTDLS_AUTO_ENABLE
 # For TDLS tear down inactive time 40 sec
 DHDCFLAGS += -DCUSTOM_TDLS_IDLE_MODE_SETTING=40000
 # for TDLS RSSI HIGH for establishing TDLS link
 DHDCFLAGS += -DCUSTOM_TDLS_RSSI_THRESHOLD_HIGH=-60
 # for TDLS RSSI HIGH for tearing down TDLS link
 DHDCFLAGS += -DCUSTOM_TDLS_RSSI_THRESHOLD_LOW=-70

 # Roaming
 DHDCFLAGS += -DROAM_AP_ENV_DETECTION
 DHDCFLAGS += -DROAM_ENABLE -DROAM_CHANNEL_CACHE -DROAM_API
 DHDCFLAGS += -DENABLE_FW_ROAM_SUSPEND
 # Roaming trigger
 DHDCFLAGS += -DCUSTOM_ROAM_TRIGGER_SETTING=-75
 DHDCFLAGS += -DCUSTOM_ROAM_DELTA_SETTING=10
 # Set PM 2 always regardless suspend/resume
 DHDCFLAGS += -DSUPPORT_PM2_ONLY

 # For special PNO Event keep wake lock for 10sec
 DHDCFLAGS += -DCUSTOM_PNO_EVENT_LOCK_xTIME=10
 DHDCFLAGS += -DMIRACAST_AMPDU_SIZE=8

 #Gscan
 #DHDCFLAGS += -DGSCAN_SUPPORT
 DHDCFLAGS += -DRTT_SUPPORT
 DHDCFLAGS += -DWL_VENDOR_EXT_SUPPORT
 #Link Statistics
 DHDCFLAGS += -DLINKSTAT_SUPPORT


 # Early suspend
 DHDCFLAGS += -DDHD_USE_EARLYSUSPEND

 # For Scan result patch
 DHDCFLAGS += -DESCAN_RESULT_PATCH

 # For Static Buffer
 ifeq ($(CONFIG_DHD_USE_STATIC_BUF),y)
   DHDCFLAGS += -DENHANCED_STATIC_BUF
   DHDCFLAGS += -DSTATIC_WL_PRIV_STRUCT
 endif
 ifneq ($(CONFIG_DHD_USE_SCHED_SCAN),)
 DHDCFLAGS += -DWL_SCHED_SCAN
 endif

 # Ioctl timeout 5000ms
 DHDCFLAGS += -DIOCTL_RESP_TIMEOUT=5000

 # Prevent rx thread monopolize
 DHDCFLAGS += -DWAIT_DEQUEUE

 # Config PM Control
 DHDCFLAGS += -DCONFIG_CONTROL_PM

 # idle count
 DHDCFLAGS += -DDHD_USE_IDLECOUNT

 # SKB TAILPAD to avoid out of boundary memory access
 DHDCFLAGS += -DDHDENABLE_TAILPAD

 # Wi-Fi Direct
 DHDCFLAGS += -DWL_CFG80211_VSDB_PRIORITIZE_SCAN_REQUEST
 DHDCFLAGS += -DWL_CFG80211_STA_EVENT
 DHDCFLAGS += -DWL_IFACE_COMB_NUM_CHANNELS
 DHDCFLAGS += -DWL_ENABLE_P2P_IF

 DHDCFLAGS += -DWL_CFG80211_ACL
 DHDCFLAGS += -DDISABLE_11H_SOFTAP
 DHDCFLAGS += -DSET_RANDOM_MAC_SOFTAP
 DHDCFLAGS += -DCUSTOM_SET_SHORT_DWELL_TIME

 ##########################
 # driver type
 # m: module type driver
 # y: built-in type driver
 ##########################
 DRIVER_TYPE ?= y

 #########################
 # Chip dependent feature
 #########################

 ifneq ($(filter y, $(CONFIG_BCM4354) $(CONFIG_BCM4356)),)
   DHDCFLAGS += -DUSE_WL_TXBF
   DHDCFLAGS += -DUSE_WL_FRAMEBURST
   DHDCFLAGS += -DCUSTOM_DPC_CPUCORE=0
   DHDCFLAGS += -DMAX_AP_CLIENT_CNT=10
   DHDCFLAGS += -DMAX_GO_CLIENT_CNT=5

 # New Features
   DHDCFLAGS += -DWL11U
   DHDCFLAGS += -DMFP
   DHDCFLAGS += -DDHD_ENABLE_LPC
   DHDCFLAGS += -DCUSTOM_COUNTRY_CODE
 #  DHDCFLAGS += -DSAR_SUPPORT

 # debug info
   DHDCFLAGS += -DDHD_WAKE_STATUS

 ifneq ($(CONFIG_BCMDHD_SDIO),)
   DHDCFLAGS += -DBDC -DOOB_INTR_ONLY -DHW_OOB -DDHD_BCMEVENTS -DMMC_SDIO_ABORT
   DHDCFLAGS += -DBCMSDIO -DBCMLXSDMMC -DUSE_SDIOFIFO_IOVAR
   DHDCFLAGS += -DPROP_TXSTATUS
   DHDCFLAGS += -DCUSTOM_AMPDU_MPDU=16
   DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64
 # tput enhancement
   DHDCFLAGS += -DCUSTOM_GLOM_SETTING=8 -DCUSTOM_RXCHAIN=1
   DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=128
   DHDCFLAGS += -DBCMSDIOH_TXGLOM -DCUSTOM_TXGLOM=1 -DBCMSDIOH_TXGLOM_HIGHSPEED
   DHDCFLAGS += -DDHDTCPACK_SUPPRESS
   DHDCFLAGS += -DRXFRAME_THREAD
   DHDCFLAGS += -DREPEAT_READFRAME
   DHDCFLAGS += -DCUSTOM_MAX_TXGLOM_SIZE=40
   DHDCFLAGS += -DMAX_HDR_READ=128
   DHDCFLAGS += -DDHD_FIRSTREAD=128

 # bcn_timeout
   DHDCFLAGS += -DCUSTOM_BCN_TIMEOUT_SETTING=5

   DHDCFLAGS += -DWLFC_STATE_PREALLOC
 endif

 ifneq ($(CONFIG_BCMDHD_PCIE),)
   DHDCFLAGS += -DPCIE_FULL_DONGLE -DBCMPCIE -DCUSTOM_DPC_PRIO_SETTING=-1
 # tput enhancement
   DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64
   DHDCFLAGS += -DCUSTOM_AMPDU_MPDU=32
   DHDCFLAGS += -DCUSTOM_AMPDU_RELEASE=16
   DHDCFLAGS += -DPROP_TXSTATUS_VSDB
 # Disable watchdog thread
   DHDCFLAGS += -DCUSTOM_DHD_WATCHDOG_MS=0

   DHDCFLAGS += -DMAX_CNTL_TX_TIMEOUT=1
 ifneq ($(CONFIG_ARCH_MSM),)
   DHDCFLAGS += -DMSM_PCIE_LINKDOWN_RECOVERY
 endif
 ifeq ($(CONFIG_DHD_USE_STATIC_BUF),y)
   DHDCFLAGS += -DDHD_USE_STATIC_IOCTLBUF
 endif

   DHDCFLAGS += -DDONGLE_ENABLE_ISOLATION
 endif

 # Print 802.1X packets
   DHDCFLAGS += -DDHD_8021X_DUMP
 # Print DHCP packets
   DHDCFLAGS += -DDHD_DHCP_DUMP
 endif

 ifneq ($(CONFIG_BCM4339),)
   DHDCFLAGS += -DBCM4339_CHIP -DHW_OOB

   # tput enhancement
   DHDCFLAGS += -DCUSTOM_GLOM_SETTING=8 -DCUSTOM_RXCHAIN=1
   DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=128
   DHDCFLAGS += -DBCMSDIOH_TXGLOM -DCUSTOM_TXGLOM=1 -DBCMSDIOH_TXGLOM_HIGHSPEED
   DHDCFLAGS += -DDHDTCPACK_SUPPRESS
   DHDCFLAGS += -DUSE_WL_TXBF
   DHDCFLAGS += -DUSE_WL_FRAMEBURST
   DHDCFLAGS += -DRXFRAME_THREAD
   DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64
   DHDCFLAGS += -DCUSTOM_DPC_CPUCORE=0
   DHDCFLAGS += -DPROP_TXSTATUS_VSDB
   DHDCFLAGS += -DCUSTOM_MAX_TXGLOM_SIZE=32

   # New Features
   DHDCFLAGS += -DWL11U
   DHDCFLAGS += -DDHD_ENABLE_LPC
   DHDCFLAGS += -DCUSTOM_PSPRETEND_THR=30
 endif


 #EXTRA_LDFLAGS += --strip-debug

 ifeq ($(DRIVER_TYPE),y)
   DHDCFLAGS += -DENABLE_INSMOD_NO_FW_LOAD
 #  DHDCFLAGS += -DUSE_LATE_INITCALL_SYNC
 endif

 EXTRA_CFLAGS += $(DHDCFLAGS) -DDHD_DEBUG
 EXTRA_CFLAGS += -DSRCBASE=\"$(src)\"
 EXTRA_CFLAGS += -I$(src)/include/ -I$(src)/
 KBUILD_CFLAGS += -I$(LINUXDIR)/include -I$(shell pwd)

 DHDOFILES := dhd_pno.o dhd_common.o dhd_ip.o dhd_custom_gpio.o \
 	dhd_linux.o dhd_linux_sched.o dhd_cfg80211.o dhd_linux_wq.o aiutils.o bcmevent.o \
 	bcmutils.o bcmwifi_channels.o hndpmu.o linux_osl.o sbutils.o siutils.o \
 	wl_android.o wl_roam.o wl_cfg80211.o wl_cfgp2p.o wl_cfg_btcoex.o wldev_common.o wl_linux_mon.o  \
 	dhd_linux_platdev.o dhd_pno.o dhd_rtt.o dhd_linux_wq.o wl_cfg_btcoex.o \
 	hnd_pktq.o hnd_pktpool.o wl_cfgvendor.o

 ifneq ($(CONFIG_BCMDHD_SDIO),)
   DHDOFILES += bcmsdh.o bcmsdh_linux.o bcmsdh_sdmmc.o bcmsdh_sdmmc_linux.o
   DHDOFILES += dhd_cdc.o dhd_wlfc.o dhd_sdio.o
 endif

 ifneq ($(CONFIG_BCMDHD_PCIE),)
   DHDOFILES += dhd_pcie.o dhd_pcie_linux.o dhd_msgbuf.o dhd_flowring.o
   DHDOFILES += pcie_core.o
 endif

 bcmdhd-objs := $(DHDOFILES)
 obj-$(DRIVER_TYPE)   += bcmdhd.o

 all:
 	@echo "$(MAKE) --no-print-directory -C $(KDIR) SUBDIRS=$(CURDIR) modules"
 	@$(MAKE) --no-print-directory -C $(KDIR) SUBDIRS=$(CURDIR) modules

 clean:
 	rm -rf *.o *.ko *.mod.c *~ .*.cmd *.o.cmd .*.o.cmd \
 	Module.symvers modules.order .tmp_versions modules.builtin

 install:
 	@$(MAKE) --no-print-directory -C $(KDIR) \
 		SUBDIRS=$(CURDIR) modules_install
	# bcmdhd
	#####################
	# SDIO Basic feature
	#####################

	DHDCFLAGS += -Wall -Wstrict-prototypes -Dlinux -DLINUX -DBCMDRIVER \
	-DBCMDONGLEHOST -DUNRELEASEDCHIP -DBCMDMA32 -DBCMFILEIMAGE \
	-DDHDTHREAD -DSHOW_EVENTS -DBCMDBG -DWLP2P \
	-DWIFI_ACT_FRAME -DARP_OFFLOAD_SUPPORT \
	-DKEEP_ALIVE -DCSCAN -DPKT_FILTER_SUPPORT \
	-DEMBEDDED_PLATFORM -DPNO_SUPPORT -DSHOW_LOGTRACE \
	-DDHD_DONOT_FORWARD_BCMEVENT_AS_NETWORK_PKT \
	-DCUSTOMER_HW2 -DGET_CUSTOM_MAC_ENABLE

	#################
	# Common feature
	#################
	DHDCFLAGS += -DWL_CFG80211
	# Print out kernel panic point of file and line info when assertion happened
	DHDCFLAGS += -DBCMASSERT_LOG

	# keepalive
	DHDCFLAGS += -DCUSTOM_KEEP_ALIVE_SETTING=28000

	DHDCFLAGS += -DVSDB

	# For p2p connection issue
	DHDCFLAGS += -DWL_SCB_TIMEOUT=10


	# TDLS enable
	DHDCFLAGS += -DWLTDLS -DWLTDLS_AUTO_ENABLE
	# For TDLS tear down inactive time 40 sec
	DHDCFLAGS += -DCUSTOM_TDLS_IDLE_MODE_SETTING=40000
	# for TDLS RSSI HIGH for establishing TDLS link
	DHDCFLAGS += -DCUSTOM_TDLS_RSSI_THRESHOLD_HIGH=-60
	# for TDLS RSSI HIGH for tearing down TDLS link
	DHDCFLAGS += -DCUSTOM_TDLS_RSSI_THRESHOLD_LOW=-70

	# Roaming
	DHDCFLAGS += -DROAM_AP_ENV_DETECTION
	DHDCFLAGS += -DROAM_ENABLE -DROAM_CHANNEL_CACHE -DROAM_API
	DHDCFLAGS += -DENABLE_FW_ROAM_SUSPEND
	# Roaming trigger
	DHDCFLAGS += -DCUSTOM_ROAM_TRIGGER_SETTING=-75
	DHDCFLAGS += -DCUSTOM_ROAM_DELTA_SETTING=10
	# Set PM 2 always regardless suspend/resume
	DHDCFLAGS += -DSUPPORT_PM2_ONLY

	# For special PNO Event keep wake lock for 10sec
	DHDCFLAGS += -DCUSTOM_PNO_EVENT_LOCK_xTIME=10
	DHDCFLAGS += -DMIRACAST_AMPDU_SIZE=8

	#Gscan
	#DHDCFLAGS += -DGSCAN_SUPPORT
	DHDCFLAGS += -DRTT_SUPPORT
	DHDCFLAGS += -DWL_VENDOR_EXT_SUPPORT
	#Link Statistics
	DHDCFLAGS += -DLINKSTAT_SUPPORT


	# Early suspend
	DHDCFLAGS += -DDHD_USE_EARLYSUSPEND

	# For Scan result patch
	DHDCFLAGS += -DESCAN_RESULT_PATCH

	# For Static Buffer
	ifeq ($(CONFIG_DHD_USE_STATIC_BUF),y)
	DHDCFLAGS += -DENHANCED_STATIC_BUF
	DHDCFLAGS += -DSTATIC_WL_PRIV_STRUCT
	endif
	ifneq ($(CONFIG_DHD_USE_SCHED_SCAN),)
	DHDCFLAGS += -DWL_SCHED_SCAN
	endif

	# Ioctl timeout 5000ms
	DHDCFLAGS += -DIOCTL_RESP_TIMEOUT=5000

	# Prevent rx thread monopolize
	DHDCFLAGS += -DWAIT_DEQUEUE

	# Config PM Control
	DHDCFLAGS += -DCONFIG_CONTROL_PM

	# idle count
	DHDCFLAGS += -DDHD_USE_IDLECOUNT

	# SKB TAILPAD to avoid out of boundary memory access
	DHDCFLAGS += -DDHDENABLE_TAILPAD

	# Wi-Fi Direct
	DHDCFLAGS += -DWL_CFG80211_VSDB_PRIORITIZE_SCAN_REQUEST
	DHDCFLAGS += -DWL_CFG80211_STA_EVENT
	DHDCFLAGS += -DWL_IFACE_COMB_NUM_CHANNELS
	DHDCFLAGS += -DWL_ENABLE_P2P_IF

	DHDCFLAGS += -DWL_CFG80211_ACL
	DHDCFLAGS += -DDISABLE_11H_SOFTAP
	DHDCFLAGS += -DSET_RANDOM_MAC_SOFTAP
	DHDCFLAGS += -DCUSTOM_SET_SHORT_DWELL_TIME

	##########################
	# driver type
	# m: module type driver
	# y: built-in type driver
	##########################
	DRIVER_TYPE ?= y

	#########################
	# Chip dependent feature
	#########################

	ifneq ($(filter y, $(CONFIG_BCM4354) $(CONFIG_BCM4356)),)
	DHDCFLAGS += -DUSE_WL_TXBF
	DHDCFLAGS += -DUSE_WL_FRAMEBURST
	DHDCFLAGS += -DCUSTOM_DPC_CPUCORE=0
	DHDCFLAGS += -DMAX_AP_CLIENT_CNT=10
	DHDCFLAGS += -DMAX_GO_CLIENT_CNT=5

	# New Features
	DHDCFLAGS += -DWL11U
	DHDCFLAGS += -DMFP
	DHDCFLAGS += -DDHD_ENABLE_LPC
	DHDCFLAGS += -DCUSTOM_COUNTRY_CODE
	# DHDCFLAGS += -DSAR_SUPPORT

	# debug info
	DHDCFLAGS += -DDHD_WAKE_STATUS

	ifneq ($(CONFIG_BCMDHD_SDIO),)
	DHDCFLAGS += -DBDC -DOOB_INTR_ONLY -DHW_OOB -DDHD_BCMEVENTS -DMMC_SDIO_ABORT
	DHDCFLAGS += -DBCMSDIO -DBCMLXSDMMC -DUSE_SDIOFIFO_IOVAR
	DHDCFLAGS += -DPROP_TXSTATUS
	DHDCFLAGS += -DCUSTOM_AMPDU_MPDU=16
	DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64
	# tput enhancement
	DHDCFLAGS += -DCUSTOM_GLOM_SETTING=8 -DCUSTOM_RXCHAIN=1
	DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=128
	DHDCFLAGS += -DBCMSDIOH_TXGLOM -DCUSTOM_TXGLOM=1 -DBCMSDIOH_TXGLOM_HIGHSPEED
	DHDCFLAGS += -DDHDTCPACK_SUPPRESS
	DHDCFLAGS += -DRXFRAME_THREAD
	DHDCFLAGS += -DREPEAT_READFRAME
	DHDCFLAGS += -DCUSTOM_MAX_TXGLOM_SIZE=40
	DHDCFLAGS += -DMAX_HDR_READ=128
	DHDCFLAGS += -DDHD_FIRSTREAD=128

	# bcn_timeout
	DHDCFLAGS += -DCUSTOM_BCN_TIMEOUT_SETTING=5

	DHDCFLAGS += -DWLFC_STATE_PREALLOC
	endif

	ifneq ($(CONFIG_BCMDHD_PCIE),)
	DHDCFLAGS += -DPCIE_FULL_DONGLE -DBCMPCIE -DCUSTOM_DPC_PRIO_SETTING=-1
	# tput enhancement
	DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64
	DHDCFLAGS += -DCUSTOM_AMPDU_MPDU=32
	DHDCFLAGS += -DCUSTOM_AMPDU_RELEASE=16
	DHDCFLAGS += -DPROP_TXSTATUS_VSDB
	# Disable watchdog thread
	DHDCFLAGS += -DCUSTOM_DHD_WATCHDOG_MS=0

	DHDCFLAGS += -DMAX_CNTL_TX_TIMEOUT=1
	ifneq ($(CONFIG_ARCH_MSM),)
	DHDCFLAGS += -DMSM_PCIE_LINKDOWN_RECOVERY
	endif
	ifeq ($(CONFIG_DHD_USE_STATIC_BUF),y)
	DHDCFLAGS += -DDHD_USE_STATIC_IOCTLBUF
	endif

	DHDCFLAGS += -DDONGLE_ENABLE_ISOLATION
	endif

	# Print 802.1X packets
	DHDCFLAGS += -DDHD_8021X_DUMP
	# Print DHCP packets
	DHDCFLAGS += -DDHD_DHCP_DUMP
	endif

	ifneq ($(CONFIG_BCM4339),)
	DHDCFLAGS += -DBCM4339_CHIP -DHW_OOB

	# tput enhancement
	DHDCFLAGS += -DCUSTOM_GLOM_SETTING=8 -DCUSTOM_RXCHAIN=1
	DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=128
	DHDCFLAGS += -DBCMSDIOH_TXGLOM -DCUSTOM_TXGLOM=1 -DBCMSDIOH_TXGLOM_HIGHSPEED
	DHDCFLAGS += -DDHDTCPACK_SUPPRESS
	DHDCFLAGS += -DUSE_WL_TXBF
	DHDCFLAGS += -DUSE_WL_FRAMEBURST
	DHDCFLAGS += -DRXFRAME_THREAD
	DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64
	DHDCFLAGS += -DCUSTOM_DPC_CPUCORE=0
	DHDCFLAGS += -DPROP_TXSTATUS_VSDB
	DHDCFLAGS += -DCUSTOM_MAX_TXGLOM_SIZE=32

	# New Features
	DHDCFLAGS += -DWL11U
	DHDCFLAGS += -DDHD_ENABLE_LPC
	DHDCFLAGS += -DCUSTOM_PSPRETEND_THR=30
	endif


	#EXTRA_LDFLAGS += --strip-debug

	ifeq ($(DRIVER_TYPE),y)
	DHDCFLAGS += -DENABLE_INSMOD_NO_FW_LOAD
	# DHDCFLAGS += -DUSE_LATE_INITCALL_SYNC
	endif

	EXTRA_CFLAGS += $(DHDCFLAGS) -DDHD_DEBUG
	EXTRA_CFLAGS += -DSRCBASE=\"$(src)\"
	EXTRA_CFLAGS += -I$(src)/include/ -I$(src)/
	KBUILD_CFLAGS += -I$(LINUXDIR)/include -I$(shell pwd)

	DHDOFILES := dhd_pno.o dhd_common.o dhd_ip.o dhd_custom_gpio.o \
	dhd_linux.o dhd_linux_sched.o dhd_cfg80211.o dhd_linux_wq.o aiutils.o bcmevent.o \
	bcmutils.o bcmwifi_channels.o hndpmu.o linux_osl.o sbutils.o siutils.o \
	wl_android.o wl_roam.o wl_cfg80211.o wl_cfgp2p.o wl_cfg_btcoex.o wldev_common.o wl_linux_mon.o \
	dhd_linux_platdev.o dhd_pno.o dhd_rtt.o dhd_linux_wq.o wl_cfg_btcoex.o \
	hnd_pktq.o hnd_pktpool.o wl_cfgvendor.o

	ifneq ($(CONFIG_BCMDHD_SDIO),)
	DHDOFILES += bcmsdh.o bcmsdh_linux.o bcmsdh_sdmmc.o bcmsdh_sdmmc_linux.o
	DHDOFILES += dhd_cdc.o dhd_wlfc.o dhd_sdio.o
	endif

	ifneq ($(CONFIG_BCMDHD_PCIE),)
	DHDOFILES += dhd_pcie.o dhd_pcie_linux.o dhd_msgbuf.o dhd_flowring.o
	DHDOFILES += pcie_core.o
	endif

	bcmdhd-objs := $(DHDOFILES)
	obj-$(DRIVER_TYPE) += bcmdhd.o

	all:
	@echo "$(MAKE) --no-print-directory -C $(KDIR) SUBDIRS=$(CURDIR) modules"
	@$(MAKE) --no-print-directory -C $(KDIR) SUBDIRS=$(CURDIR) modules

	clean:
	rm -rf .o .ko .mod.c ~ ..cmd .o.cmd .*.o.cmd \
	Module.symvers modules.order .tmp_versions modules.builtin

	install:
	@$(MAKE) --no-print-directory -C $(KDIR) \
	SUBDIRS=$(CURDIR) modules_install