| /* |
| * arch/arm/mach-tegra/board-pismo.c |
| * |
| * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/ctype.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/serial_8250.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/i2c-hid.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/delay.h> |
| #include <linux/i2c-tegra.h> |
| #include <linux/gpio.h> |
| #include <linux/input.h> |
| #include <linux/platform_data/tegra_usb.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/rm31080a_ts.h> |
| #include <linux/memblock.h> |
| #include <linux/spi-tegra.h> |
| #include <linux/nfc/pn544.h> |
| #include <linux/rfkill-gpio.h> |
| #include <linux/skbuff.h> |
| #include <linux/ti_wilink_st.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/smb349-charger.h> |
| #include <linux/max17048_battery.h> |
| #include <linux/leds.h> |
| #include <linux/i2c/at24.h> |
| #include <linux/of_platform.h> |
| #include <linux/edp.h> |
| #include <linux/usb/tegra_usb_phy.h> |
| #include <linux/clk/tegra.h> |
| |
| #include <mach/irqs.h> |
| #include <mach/pinmux.h> |
| #include <mach/pinmux-t11.h> |
| #include <mach/io_dpd.h> |
| #include <mach/i2s.h> |
| #include <mach/tegra_asoc_pdata.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <mach/gpio-tegra.h> |
| #include <mach/tegra_fiq_debugger.h> |
| #include <linux/platform_data/tegra_usb_modem_power.h> |
| |
| #include "board-touch-raydium.h" |
| #include "board.h" |
| #include "board-common.h" |
| #include "clock.h" |
| #include "board-pismo.h" |
| #include "devices.h" |
| #include "gpio-names.h" |
| #include "fuse.h" |
| #include "pm.h" |
| #include "pm-irq.h" |
| #include "common.h" |
| #include "tegra-board-id.h" |
| #include "iomap.h" |
| |
| #ifdef CONFIG_BT_BLUESLEEP |
| static struct rfkill_gpio_platform_data pismo_bt_rfkill_pdata = { |
| .name = "bt_rfkill", |
| .shutdown_gpio = TEGRA_GPIO_PQ7, |
| .reset_gpio = TEGRA_GPIO_PQ6, |
| .type = RFKILL_TYPE_BLUETOOTH, |
| }; |
| |
| static struct platform_device pismo_bt_rfkill_device = { |
| .name = "rfkill_gpio", |
| .id = -1, |
| .dev = { |
| .platform_data = &pismo_bt_rfkill_pdata, |
| }, |
| }; |
| |
| static struct resource pismo_bluesleep_resources[] = { |
| [0] = { |
| .name = "gpio_host_wake", |
| .start = TEGRA_GPIO_PU6, |
| .end = TEGRA_GPIO_PU6, |
| .flags = IORESOURCE_IO, |
| }, |
| [1] = { |
| .name = "gpio_ext_wake", |
| .start = TEGRA_GPIO_PEE1, |
| .end = TEGRA_GPIO_PEE1, |
| .flags = IORESOURCE_IO, |
| }, |
| [2] = { |
| .name = "host_wake", |
| .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, |
| }, |
| }; |
| |
| static struct platform_device pismo_bluesleep_device = { |
| .name = "bluesleep", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(pismo_bluesleep_resources), |
| .resource = pismo_bluesleep_resources, |
| }; |
| |
| static noinline void __init pismo_setup_bt_rfkill(void) |
| { |
| platform_device_register(&pismo_bt_rfkill_device); |
| } |
| |
| static noinline void __init pismo_setup_bluesleep(void) |
| { |
| pismo_bluesleep_resources[2].start = |
| pismo_bluesleep_resources[2].end = |
| gpio_to_irq(TEGRA_GPIO_PU6); |
| platform_device_register(&pismo_bluesleep_device); |
| return; |
| } |
| #elif defined CONFIG_BLUEDROID_PM |
| static struct resource pismo_bluedroid_pm_resources[] = { |
| [0] = { |
| .name = "shutdown_gpio", |
| .start = TEGRA_GPIO_PQ7, |
| .end = TEGRA_GPIO_PQ7, |
| .flags = IORESOURCE_IO, |
| }, |
| [1] = { |
| .name = "host_wake", |
| .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, |
| }, |
| [2] = { |
| .name = "gpio_ext_wake", |
| .start = TEGRA_GPIO_PEE1, |
| .end = TEGRA_GPIO_PEE1, |
| .flags = IORESOURCE_IO, |
| }, |
| [3] = { |
| .name = "gpio_host_wake", |
| .start = TEGRA_GPIO_PU6, |
| .end = TEGRA_GPIO_PU6, |
| .flags = IORESOURCE_IO, |
| }, |
| [4] = { |
| .name = "reset_gpio", |
| .start = TEGRA_GPIO_PQ6, |
| .end = TEGRA_GPIO_PQ6, |
| .flags = IORESOURCE_IO, |
| }, |
| }; |
| |
| static struct platform_device pismo_bluedroid_pm_device = { |
| .name = "bluedroid_pm", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(pismo_bluedroid_pm_resources), |
| .resource = pismo_bluedroid_pm_resources, |
| }; |
| |
| static noinline void __init pismo_setup_bluedroid_pm(void) |
| { |
| pismo_bluedroid_pm_resources[1].start = |
| pismo_bluedroid_pm_resources[1].end = |
| gpio_to_irq(TEGRA_GPIO_PU6); |
| platform_device_register(&pismo_bluedroid_pm_device); |
| } |
| #endif |
| |
| static __initdata struct tegra_clk_init_table pismo_clk_init_table[] = { |
| /* name parent rate enabled */ |
| { "pll_m", NULL, 0, false}, |
| { "hda", "pll_p", 108000000, false}, |
| { "hda2codec_2x", "pll_p", 48000000, false}, |
| { "pwm", "pll_p", 3187500, false}, |
| { "blink", "clk_32k", 32768, true}, |
| { "i2s1", "pll_a_out0", 0, false}, |
| { "i2s3", "pll_a_out0", 0, false}, |
| { "i2s4", "pll_a_out0", 0, false}, |
| { "spdif_out", "pll_a_out0", 0, false}, |
| { "d_audio", "clk_m", 12000000, false}, |
| { "dam0", "clk_m", 12000000, false}, |
| { "dam1", "clk_m", 12000000, false}, |
| { "dam2", "clk_m", 12000000, false}, |
| { "audio1", "i2s1_sync", 0, false}, |
| { "audio3", "i2s3_sync", 0, false}, |
| /* Setting vi_sensor-clk to true for validation purpose, will imapact |
| * power, later set to be false.*/ |
| { "vi_sensor", "pll_p", 150000000, false}, |
| { "cilab", "pll_p", 150000000, false}, |
| { "cilcd", "pll_p", 150000000, false}, |
| { "cile", "pll_p", 150000000, false}, |
| { "i2c1", "pll_p", 3200000, false}, |
| { "i2c2", "pll_p", 3200000, false}, |
| { "i2c3", "pll_p", 3200000, false}, |
| { "i2c4", "pll_p", 3200000, false}, |
| { "i2c5", "pll_p", 3200000, false}, |
| { NULL, NULL, 0, 0}, |
| }; |
| |
| static struct tegra_i2c_platform_data pismo_i2c1_platform_data = { |
| .bus_clk_rate = 100000, |
| .scl_gpio = TEGRA_GPIO_I2C1_SCL, |
| .sda_gpio = TEGRA_GPIO_I2C1_SDA, |
| }; |
| |
| static struct tegra_i2c_platform_data pismo_i2c2_platform_data = { |
| .bus_clk_rate = 100000, |
| .is_clkon_always = true, |
| .scl_gpio = TEGRA_GPIO_I2C2_SCL, |
| .sda_gpio = TEGRA_GPIO_I2C2_SDA, |
| }; |
| |
| static struct tegra_i2c_platform_data pismo_i2c3_platform_data = { |
| .bus_clk_rate = 100000, |
| .scl_gpio = TEGRA_GPIO_I2C3_SCL, |
| .sda_gpio = TEGRA_GPIO_I2C3_SDA, |
| }; |
| |
| static struct tegra_i2c_platform_data pismo_i2c4_platform_data = { |
| .bus_clk_rate = 10000, |
| .scl_gpio = TEGRA_GPIO_I2C4_SCL, |
| .sda_gpio = TEGRA_GPIO_I2C4_SDA, |
| }; |
| |
| static struct tegra_i2c_platform_data pismo_i2c5_platform_data = { |
| .bus_clk_rate = 400000, |
| .scl_gpio = TEGRA_GPIO_I2C5_SCL, |
| .sda_gpio = TEGRA_GPIO_I2C5_SDA, |
| .needs_cl_dvfs_clock = true, |
| }; |
| |
| static struct i2c_board_info __initdata rt5640_board_info = { |
| I2C_BOARD_INFO("rt5640", 0x1c), |
| }; |
| |
| static struct pn544_i2c_platform_data nfc_pdata = { |
| .irq_gpio = TEGRA_GPIO_PW2, |
| .ven_gpio = TEGRA_GPIO_PQ3, |
| .firm_gpio = TEGRA_GPIO_PH0, |
| }; |
| |
| static struct i2c_board_info __initdata nfc_board_info = { |
| I2C_BOARD_INFO("pn544", 0x28), |
| .platform_data = &nfc_pdata, |
| }; |
| |
| static struct i2c_hid_platform_data i2c_keyboard_pdata = { |
| .hid_descriptor_address = 0x0, |
| }; |
| |
| static struct i2c_board_info __initdata i2c_keyboard_board_info = { |
| I2C_BOARD_INFO("hid", 0x3B), |
| .platform_data = &i2c_keyboard_pdata, |
| }; |
| |
| static struct i2c_hid_platform_data i2c_touchpad_pdata = { |
| .hid_descriptor_address = 0x20, |
| }; |
| |
| static struct i2c_board_info __initdata i2c_touchpad_board_info = { |
| I2C_BOARD_INFO("hid", 0x2C), |
| .platform_data = &i2c_touchpad_pdata, |
| }; |
| |
| static void pismo_i2c_init(void) |
| { |
| |
| tegra11_i2c_device1.dev.platform_data = &pismo_i2c1_platform_data; |
| tegra11_i2c_device2.dev.platform_data = &pismo_i2c2_platform_data; |
| tegra11_i2c_device3.dev.platform_data = &pismo_i2c3_platform_data; |
| tegra11_i2c_device4.dev.platform_data = &pismo_i2c4_platform_data; |
| tegra11_i2c_device5.dev.platform_data = &pismo_i2c5_platform_data; |
| |
| nfc_board_info.irq = gpio_to_irq(TEGRA_GPIO_PW2); |
| i2c_register_board_info(0, &nfc_board_info, 1); |
| |
| platform_device_register(&tegra11_i2c_device5); |
| platform_device_register(&tegra11_i2c_device4); |
| platform_device_register(&tegra11_i2c_device3); |
| platform_device_register(&tegra11_i2c_device2); |
| platform_device_register(&tegra11_i2c_device1); |
| |
| i2c_register_board_info(0, &rt5640_board_info, 1); |
| |
| i2c_keyboard_board_info.irq = gpio_to_irq(I2C_KB_IRQ); |
| i2c_register_board_info(1, &i2c_keyboard_board_info , 1); |
| |
| i2c_touchpad_board_info.irq = gpio_to_irq(I2C_TP_IRQ); |
| i2c_register_board_info(1, &i2c_touchpad_board_info , 1); |
| } |
| |
| static struct platform_device *pismo_uart_devices[] __initdata = { |
| &tegra_uarta_device, |
| &tegra_uartb_device, |
| &tegra_uartc_device, |
| &tegra_uartd_device, |
| }; |
| |
| static void __init uart_debug_init(void) |
| { |
| int debug_port_id; |
| |
| debug_port_id = uart_console_debug_init(3); |
| if (debug_port_id < 0) |
| return; |
| |
| pismo_uart_devices[debug_port_id] = uart_console_debug_device; |
| } |
| |
| static void __init pismo_uart_init(void) |
| { |
| /* Register low speed only if it is selected */ |
| if (!is_tegra_debug_uartport_hs()) |
| uart_debug_init(); |
| |
| platform_add_devices(pismo_uart_devices, |
| ARRAY_SIZE(pismo_uart_devices)); |
| } |
| |
| static struct resource tegra_rtc_resources[] = { |
| [0] = { |
| .start = TEGRA_RTC_BASE, |
| .end = TEGRA_RTC_BASE + TEGRA_RTC_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = INT_RTC, |
| .end = INT_RTC, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device tegra_rtc_device = { |
| .name = "tegra_rtc", |
| .id = -1, |
| .resource = tegra_rtc_resources, |
| .num_resources = ARRAY_SIZE(tegra_rtc_resources), |
| }; |
| |
| static struct tegra_asoc_platform_data pismo_audio_pdata = { |
| .gpio_spkr_en = TEGRA_GPIO_SPKR_EN, |
| .gpio_hp_det = TEGRA_GPIO_HP_DET, |
| .gpio_hp_mute = -1, |
| .gpio_int_mic_en = TEGRA_GPIO_INT_MIC_EN, |
| .gpio_ext_mic_en = TEGRA_GPIO_EXT_MIC_EN, |
| .gpio_ldo1_en = TEGRA_GPIO_LDO1_EN, |
| .gpio_codec1 = TEGRA_GPIO_CODEC1_EN, |
| .gpio_codec2 = TEGRA_GPIO_CODEC2_EN, |
| .gpio_codec3 = TEGRA_GPIO_CODEC3_EN, |
| .i2s_param[HIFI_CODEC] = { |
| .audio_port_id = 1, |
| .is_i2s_master = 1, |
| .i2s_mode = TEGRA_DAIFMT_I2S, |
| }, |
| .i2s_param[BT_SCO] = { |
| .audio_port_id = 3, |
| .is_i2s_master = 1, |
| .i2s_mode = TEGRA_DAIFMT_DSP_A, |
| }, |
| }; |
| |
| static struct platform_device pismo_audio_device = { |
| .name = "tegra-snd-rt5640", |
| .id = 0, |
| .dev = { |
| .platform_data = &pismo_audio_pdata, |
| }, |
| }; |
| |
| static struct platform_device tegra_camera = { |
| .name = "tegra_camera", |
| .id = -1, |
| }; |
| |
| static struct platform_device *pismo_devices[] __initdata = { |
| &tegra_pmu_device, |
| &tegra_rtc_device, |
| &tegra_udc_device, |
| #if defined(CONFIG_TEGRA_AVP) |
| &tegra_avp_device, |
| #endif |
| &tegra_camera, |
| #if defined(CONFIG_CRYPTO_DEV_TEGRA_SE) |
| &tegra11_se_device, |
| #endif |
| &tegra_ahub_device, |
| &tegra_dam_device0, |
| &tegra_dam_device1, |
| &tegra_dam_device2, |
| &tegra_i2s_device1, |
| &tegra_i2s_device3, |
| &tegra_i2s_device4, |
| &tegra_spdif_device, |
| &spdif_dit_device, |
| &bluetooth_dit_device, |
| &pismo_audio_device, |
| &tegra_hda_device, |
| #if defined(CONFIG_CRYPTO_DEV_TEGRA_AES) |
| &tegra_aes_device, |
| #endif |
| }; |
| |
| #ifdef CONFIG_USB_SUPPORT |
| static struct tegra_usb_platform_data tegra_udc_pdata = { |
| .port_otg = true, |
| .has_hostpc = true, |
| .phy_intf = TEGRA_USB_PHY_INTF_UTMI, |
| .op_mode = TEGRA_USB_OPMODE_DEVICE, |
| .u_data.dev = { |
| .vbus_pmu_irq = 0, |
| .vbus_gpio = -1, |
| .charging_supported = false, |
| .remote_wakeup_supported = false, |
| }, |
| .u_cfg.utmi = { |
| .hssync_start_delay = 0, |
| .elastic_limit = 16, |
| .idle_wait_delay = 17, |
| .term_range_adj = 6, |
| .xcvr_setup = 8, |
| .xcvr_lsfslew = 2, |
| .xcvr_lsrslew = 2, |
| .xcvr_setup_offset = 0, |
| .xcvr_use_fuses = 1, |
| }, |
| }; |
| |
| static struct tegra_usb_platform_data tegra_ehci1_utmi_pdata = { |
| .port_otg = true, |
| .has_hostpc = true, |
| .unaligned_dma_buf_supported = false, |
| .phy_intf = TEGRA_USB_PHY_INTF_UTMI, |
| .op_mode = TEGRA_USB_OPMODE_HOST, |
| .u_data.host = { |
| .vbus_gpio = -1, |
| .hot_plug = false, |
| .remote_wakeup_supported = true, |
| .power_off_on_suspend = true, |
| }, |
| .u_cfg.utmi = { |
| .hssync_start_delay = 0, |
| .elastic_limit = 16, |
| .idle_wait_delay = 17, |
| .term_range_adj = 6, |
| .xcvr_setup = 15, |
| .xcvr_lsfslew = 2, |
| .xcvr_lsrslew = 2, |
| .xcvr_setup_offset = 0, |
| .xcvr_use_fuses = 1, |
| .vbus_oc_map = 0x4, |
| }, |
| }; |
| |
| static struct tegra_usb_platform_data tegra_ehci3_utmi_pdata = { |
| .port_otg = false, |
| .has_hostpc = true, |
| .unaligned_dma_buf_supported = false, |
| .phy_intf = TEGRA_USB_PHY_INTF_UTMI, |
| .op_mode = TEGRA_USB_OPMODE_HOST, |
| .u_data.host = { |
| .vbus_gpio = -1, |
| .hot_plug = false, |
| .remote_wakeup_supported = true, |
| .power_off_on_suspend = true, |
| }, |
| .u_cfg.utmi = { |
| .hssync_start_delay = 0, |
| .elastic_limit = 16, |
| .idle_wait_delay = 17, |
| .term_range_adj = 6, |
| .xcvr_setup = 8, |
| .xcvr_lsfslew = 2, |
| .xcvr_lsrslew = 2, |
| .xcvr_setup_offset = 0, |
| .xcvr_use_fuses = 1, |
| .vbus_oc_map = 0x5, |
| }, |
| }; |
| |
| static struct tegra_usb_otg_data tegra_otg_pdata = { |
| .ehci_device = &tegra_ehci1_device, |
| .ehci_pdata = &tegra_ehci1_utmi_pdata, |
| }; |
| |
| static void pismo_usb_init(void) |
| { |
| int usb_port_owner_info = tegra_get_usb_port_owner_info(); |
| |
| /* Set USB wake sources for pismo */ |
| tegra_set_usb_wake_source(); |
| |
| if (!(usb_port_owner_info & UTMI1_PORT_OWNER_XUSB)) { |
| tegra_otg_device.dev.platform_data = &tegra_otg_pdata; |
| platform_device_register(&tegra_otg_device); |
| /* Setup the udc platform data */ |
| tegra_udc_device.dev.platform_data = &tegra_udc_pdata; |
| } |
| |
| if (!(usb_port_owner_info & UTMI2_PORT_OWNER_XUSB)) { |
| tegra_ehci3_device.dev.platform_data = &tegra_ehci3_utmi_pdata; |
| platform_device_register(&tegra_ehci3_device); |
| } |
| } |
| |
| static struct gpio modem_gpios[] = { /* Nemo modem */ |
| {MODEM_EN, GPIOF_OUT_INIT_HIGH, "MODEM EN"}, |
| {MDM_RST, GPIOF_OUT_INIT_LOW, "MODEM RESET"}, |
| }; |
| |
| static struct tegra_usb_platform_data tegra_ehci2_hsic_baseband_pdata = { |
| .port_otg = false, |
| .has_hostpc = true, |
| .unaligned_dma_buf_supported = false, |
| .phy_intf = TEGRA_USB_PHY_INTF_HSIC, |
| .op_mode = TEGRA_USB_OPMODE_HOST, |
| .u_data.host = { |
| .vbus_gpio = -1, |
| .hot_plug = false, |
| .remote_wakeup_supported = true, |
| .power_off_on_suspend = true, |
| }, |
| }; |
| |
| static int baseband_init(void) |
| { |
| int ret; |
| |
| ret = gpio_request_array(modem_gpios, ARRAY_SIZE(modem_gpios)); |
| if (ret) { |
| pr_warn("%s:gpio request failed\n", __func__); |
| return ret; |
| } |
| |
| /* enable pull-down for MDM_COLD_BOOT */ |
| tegra_pinmux_set_pullupdown(TEGRA_PINGROUP_KB_COL5, |
| TEGRA_PUPD_PULL_DOWN); |
| |
| /* export GPIO for user space access through sysfs */ |
| gpio_export(MDM_RST, false); |
| |
| return 0; |
| } |
| |
| static const struct tegra_modem_operations baseband_operations = { |
| .init = baseband_init, |
| }; |
| |
| static struct tegra_usb_modem_power_platform_data baseband_pdata = { |
| .ops = &baseband_operations, |
| .wake_gpio = -1, |
| .boot_gpio = MDM_COLDBOOT, |
| .boot_irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| .autosuspend_delay = 2000, |
| .short_autosuspend_delay = 50, |
| .tegra_ehci_device = &tegra_ehci2_device, |
| .tegra_ehci_pdata = &tegra_ehci2_hsic_baseband_pdata, |
| }; |
| |
| static struct platform_device icera_nemo_device = { |
| .name = "tegra_usb_modem_power", |
| .id = -1, |
| .dev = { |
| .platform_data = &baseband_pdata, |
| }, |
| }; |
| |
| static void pismo_modem_init(void) |
| { |
| int modem_id = tegra_get_modem_id(); |
| int usb_port_owner_info = tegra_get_usb_port_owner_info(); |
| switch (modem_id) { |
| case TEGRA_BB_NEMO: /* on board i500 HSIC */ |
| if (!(usb_port_owner_info & HSIC1_PORT_OWNER_XUSB)) |
| platform_device_register(&icera_nemo_device); |
| break; |
| } |
| } |
| |
| #else |
| static void pismo_usb_init(void) { } |
| static void pismo_modem_init(void) { } |
| #endif |
| |
| static void pismo_audio_init(void) |
| { |
| pismo_audio_pdata.codec_name = "rt5640.0-001c"; |
| pismo_audio_pdata.codec_dai_name = "rt5640-aif1"; |
| } |
| |
| |
| static struct platform_device *pismo_spi_devices[] __initdata = { |
| &tegra11_spi_device4, |
| }; |
| |
| struct spi_clk_parent spi_parent_clk_pismo[] = { |
| [0] = {.name = "pll_p"}, |
| #ifndef CONFIG_TEGRA_PLLM_RESTRICTED |
| [1] = {.name = "pll_m"}, |
| [2] = {.name = "clk_m"}, |
| #else |
| [1] = {.name = "clk_m"}, |
| #endif |
| }; |
| |
| static struct tegra_spi_platform_data pismo_spi_pdata = { |
| .is_dma_based = false, |
| .max_dma_buffer = 16 * 1024, |
| .is_clkon_always = false, |
| .max_rate = 25000000, |
| }; |
| |
| static void __init pismo_spi_init(void) |
| { |
| int i; |
| struct clk *c; |
| struct board_info display_board_info; |
| |
| tegra_get_display_board_info(&display_board_info); |
| |
| for (i = 0; i < ARRAY_SIZE(spi_parent_clk_pismo); ++i) { |
| c = tegra_get_clock_by_name(spi_parent_clk_pismo[i].name); |
| if (IS_ERR_OR_NULL(c)) { |
| pr_err("Not able to get the clock for %s\n", |
| spi_parent_clk_pismo[i].name); |
| continue; |
| } |
| spi_parent_clk_pismo[i].parent_clk = c; |
| spi_parent_clk_pismo[i].fixed_clk_rate = clk_get_rate(c); |
| } |
| pismo_spi_pdata.parent_clk_list = spi_parent_clk_pismo; |
| pismo_spi_pdata.parent_clk_count = ARRAY_SIZE(spi_parent_clk_pismo); |
| tegra11_spi_device4.dev.platform_data = &pismo_spi_pdata; |
| platform_add_devices(pismo_spi_devices, |
| ARRAY_SIZE(pismo_spi_devices)); |
| } |
| |
| struct rm_spi_ts_platform_data rm31080ts_pismo_data = { |
| .gpio_reset = 0, |
| .config = 0, |
| .platform_id = RM_PLATFORM_D010, |
| .name_of_clock = "clk_out_2", |
| }; |
| |
| static struct tegra_spi_device_controller_data dev_cdata = { |
| .rx_clk_tap_delay = 0, |
| .tx_clk_tap_delay = 16, |
| }; |
| |
| struct spi_board_info rm31080a_pismo_spi_board[1] = { |
| { |
| .modalias = "rm_ts_spidev", |
| .bus_num = 3, |
| .chip_select = 2, |
| .max_speed_hz = 12 * 1000 * 1000, |
| .mode = SPI_MODE_0, |
| .controller_data = &dev_cdata, |
| .platform_data = &rm31080ts_pismo_data, |
| }, |
| }; |
| |
| static void __init tegra_pismo_init(void) |
| { |
| struct board_info board_info; |
| |
| tegra_get_display_board_info(&board_info); |
| tegra_clk_init_from_table(pismo_clk_init_table); |
| tegra_clk_verify_parents(); |
| tegra_soc_device_init("pismo"); |
| tegra_enable_pinmux(); |
| pismo_pinmux_init(); |
| pismo_i2c_init(); |
| pismo_spi_init(); |
| pismo_usb_init(); |
| pismo_uart_init(); |
| pismo_audio_init(); |
| platform_add_devices(pismo_devices, ARRAY_SIZE(pismo_devices)); |
| //tegra_ram_console_debug_init(); |
| tegra_io_dpd_init(); |
| pismo_regulator_init(); |
| pismo_sdhci_init(); |
| pismo_suspend_init(); |
| pismo_emc_init(); |
| pismo_edp_init(); |
| pismo_panel_init(); |
| pismo_pmon_init(); |
| #ifdef CONFIG_BT_BLUESLEEP |
| pismo_setup_bluesleep(); |
| pismo_setup_bt_rfkill(); |
| #elif defined CONFIG_BLUEDROID_PM |
| pismo_setup_bluedroid_pm(); |
| #endif |
| tegra_release_bootloader_fb(); |
| pismo_modem_init(); |
| #ifdef CONFIG_TEGRA_WDT_RECOVERY |
| tegra_wdt_recovery_init(); |
| #endif |
| tegra_serial_debug_init(TEGRA_UARTD_BASE, INT_WDT_CPU, NULL, -1, -1); |
| pismo_sensors_init(); |
| pismo_soctherm_init(); |
| } |
| |
| static void __init pismo_ramconsole_reserve(unsigned long size) |
| { |
| tegra_ram_console_debug_reserve(SZ_1M); |
| } |
| |
| #ifdef CONFIG_USE_OF |
| struct of_dev_auxdata pismo_auxdata_lookup[] __initdata = { |
| OF_DEV_AUXDATA("nvidia,tegra114-host1x", TEGRA_HOST1X_BASE, "host1x", |
| NULL), |
| OF_DEV_AUXDATA("nvidia,tegra114-gr3d", TEGRA_GR3D_BASE, "gr3d", NULL), |
| OF_DEV_AUXDATA("nvidia,tegra114-gr2d", TEGRA_GR2D_BASE, "gr2d", NULL), |
| OF_DEV_AUXDATA("nvidia,tegra114-msenc", TEGRA_MSENC_BASE, "msenc", |
| NULL), |
| OF_DEV_AUXDATA("nvidia,tegra114-vi", TEGRA_VI_BASE, "vi", NULL), |
| OF_DEV_AUXDATA("nvidia,tegra114-isp", TEGRA_ISP_BASE, "isp", NULL), |
| OF_DEV_AUXDATA("nvidia,tegra114-tsec", TEGRA_TSEC_BASE, "tsec", NULL), |
| {} |
| }; |
| #endif |
| |
| static void __init tegra_pismo_dt_init(void) |
| { |
| #ifdef CONFIG_USE_OF |
| of_platform_populate(NULL, |
| of_default_bus_match_table, pismo_auxdata_lookup, |
| &platform_bus); |
| #endif |
| |
| tegra_pismo_init(); |
| } |
| |
| static void __init tegra_pismo_reserve(void) |
| { |
| #if defined(CONFIG_NVMAP_CONVERT_CARVEOUT_TO_IOVMM) |
| /* 1920*1200*4*2 = 18432000 bytes */ |
| tegra_reserve(0, SZ_16M + SZ_2M, SZ_16M); |
| #else |
| tegra_reserve(SZ_128M, SZ_16M + SZ_2M, SZ_4M); |
| #endif |
| pismo_ramconsole_reserve(SZ_1M); |
| } |
| |
| static const char * const pismo_dt_board_compat[] = { |
| "nvidia,pismo", |
| NULL |
| }; |
| |
| MACHINE_START(PISMO, "pismo") |
| .atag_offset = 0x100, |
| .smp = smp_ops(tegra_smp_ops), |
| .map_io = tegra_map_common_io, |
| .reserve = tegra_pismo_reserve, |
| .init_early = tegra11x_init_early, |
| .init_irq = tegra_dt_init_irq, |
| .init_time = tegra_init_timer, |
| .init_machine = tegra_pismo_dt_init, |
| .restart = tegra_assert_system_reset, |
| .dt_compat = pismo_dt_board_compat, |
| MACHINE_END |