| /* |
| * Pentium 4/Xeon CPU on demand clock modulation/speed scaling |
| * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> |
| * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> |
| * (C) 2002 Arjan van de Ven <arjanv@redhat.com> |
| * (C) 2002 Tora T. Engstad |
| * All Rights Reserved |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * The author(s) of this software shall not be held liable for damages |
| * of any nature resulting due to the use of this software. This |
| * software is provided AS-IS with no warranties. |
| * |
| * Date Errata Description |
| * 20020525 N44, O17 12.5% or 25% DC causes lockup |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/smp.h> |
| #include <linux/cpufreq.h> |
| #include <linux/cpumask.h> |
| #include <linux/timex.h> |
| |
| #include <asm/processor.h> |
| #include <asm/msr.h> |
| #include <asm/timer.h> |
| #include <asm/cpu_device_id.h> |
| |
| #include "speedstep-lib.h" |
| |
| #define PFX "p4-clockmod: " |
| |
| /* |
| * Duty Cycle (3bits), note DC_DISABLE is not specified in |
| * intel docs i just use it to mean disable |
| */ |
| enum { |
| DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT, |
| DC_64PT, DC_75PT, DC_88PT, DC_DISABLE |
| }; |
| |
| #define DC_ENTRIES 8 |
| |
| |
| static int has_N44_O17_errata[NR_CPUS]; |
| static unsigned int stock_freq; |
| static struct cpufreq_driver p4clockmod_driver; |
| static unsigned int cpufreq_p4_get(unsigned int cpu); |
| |
| static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) |
| { |
| u32 l, h; |
| |
| if ((newstate > DC_DISABLE) || (newstate == DC_RESV)) |
| return -EINVAL; |
| |
| rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); |
| |
| if (l & 0x01) |
| pr_debug("CPU#%d currently thermal throttled\n", cpu); |
| |
| if (has_N44_O17_errata[cpu] && |
| (newstate == DC_25PT || newstate == DC_DFLT)) |
| newstate = DC_38PT; |
| |
| rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); |
| if (newstate == DC_DISABLE) { |
| pr_debug("CPU#%d disabling modulation\n", cpu); |
| wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); |
| } else { |
| pr_debug("CPU#%d setting duty cycle to %d%%\n", |
| cpu, ((125 * newstate) / 10)); |
| /* bits 63 - 5 : reserved |
| * bit 4 : enable/disable |
| * bits 3-1 : duty cycle |
| * bit 0 : reserved |
| */ |
| l = (l & ~14); |
| l = l | (1<<4) | ((newstate & 0x7)<<1); |
| wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h); |
| } |
| |
| return 0; |
| } |
| |
| |
| static struct cpufreq_frequency_table p4clockmod_table[] = { |
| {DC_RESV, CPUFREQ_ENTRY_INVALID}, |
| {DC_DFLT, 0}, |
| {DC_25PT, 0}, |
| {DC_38PT, 0}, |
| {DC_50PT, 0}, |
| {DC_64PT, 0}, |
| {DC_75PT, 0}, |
| {DC_88PT, 0}, |
| {DC_DISABLE, 0}, |
| {DC_RESV, CPUFREQ_TABLE_END}, |
| }; |
| |
| |
| static int cpufreq_p4_target(struct cpufreq_policy *policy, |
| unsigned int target_freq, |
| unsigned int relation) |
| { |
| unsigned int newstate = DC_RESV; |
| struct cpufreq_freqs freqs; |
| int i; |
| |
| if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], |
| target_freq, relation, &newstate)) |
| return -EINVAL; |
| |
| freqs.old = cpufreq_p4_get(policy->cpu); |
| freqs.new = stock_freq * p4clockmod_table[newstate].index / 8; |
| |
| if (freqs.new == freqs.old) |
| return 0; |
| |
| /* notifiers */ |
| for_each_cpu(i, policy->cpus) { |
| freqs.cpu = i; |
| cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); |
| } |
| |
| /* run on each logical CPU, |
| * see section 13.15.3 of IA32 Intel Architecture Software |
| * Developer's Manual, Volume 3 |
| */ |
| for_each_cpu(i, policy->cpus) |
| cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); |
| |
| /* notifiers */ |
| for_each_cpu(i, policy->cpus) { |
| freqs.cpu = i; |
| cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); |
| } |
| |
| return 0; |
| } |
| |
| |
| static int cpufreq_p4_verify(struct cpufreq_policy *policy) |
| { |
| return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]); |
| } |
| |
| |
| static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) |
| { |
| if (c->x86 == 0x06) { |
| if (cpu_has(c, X86_FEATURE_EST)) |
| printk_once(KERN_WARNING PFX "Warning: EST-capable " |
| "CPU detected. The acpi-cpufreq module offers " |
| "voltage scaling in addition to frequency " |
| "scaling. You should use that instead of " |
| "p4-clockmod, if possible.\n"); |
| switch (c->x86_model) { |
| case 0x0E: /* Core */ |
| case 0x0F: /* Core Duo */ |
| case 0x16: /* Celeron Core */ |
| case 0x1C: /* Atom */ |
| p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; |
| return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); |
| case 0x0D: /* Pentium M (Dothan) */ |
| p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; |
| /* fall through */ |
| case 0x09: /* Pentium M (Banias) */ |
| return speedstep_get_frequency(SPEEDSTEP_CPU_PM); |
| } |
| } |
| |
| if (c->x86 != 0xF) |
| return 0; |
| |
| /* on P-4s, the TSC runs with constant frequency independent whether |
| * throttling is active or not. */ |
| p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; |
| |
| if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { |
| printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " |
| "The speedstep-ich or acpi cpufreq modules offer " |
| "voltage scaling in addition of frequency scaling. " |
| "You should use either one instead of p4-clockmod, " |
| "if possible.\n"); |
| return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); |
| } |
| |
| return speedstep_get_frequency(SPEEDSTEP_CPU_P4D); |
| } |
| |
| |
| |
| static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) |
| { |
| struct cpuinfo_x86 *c = &cpu_data(policy->cpu); |
| int cpuid = 0; |
| unsigned int i; |
| |
| #ifdef CONFIG_SMP |
| cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); |
| #endif |
| |
| /* Errata workaround */ |
| cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask; |
| switch (cpuid) { |
| case 0x0f07: |
| case 0x0f0a: |
| case 0x0f11: |
| case 0x0f12: |
| has_N44_O17_errata[policy->cpu] = 1; |
| pr_debug("has errata -- disabling low frequencies\n"); |
| } |
| |
| if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D && |
| c->x86_model < 2) { |
| /* switch to maximum frequency and measure result */ |
| cpufreq_p4_setdc(policy->cpu, DC_DISABLE); |
| recalibrate_cpu_khz(); |
| } |
| /* get max frequency */ |
| stock_freq = cpufreq_p4_get_frequency(c); |
| if (!stock_freq) |
| return -EINVAL; |
| |
| /* table init */ |
| for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { |
| if ((i < 2) && (has_N44_O17_errata[policy->cpu])) |
| p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; |
| else |
| p4clockmod_table[i].frequency = (stock_freq * i)/8; |
| } |
| cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); |
| |
| /* cpuinfo and default policy values */ |
| |
| /* the transition latency is set to be 1 higher than the maximum |
| * transition latency of the ondemand governor */ |
| policy->cpuinfo.transition_latency = 10000001; |
| policy->cur = stock_freq; |
| |
| return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]); |
| } |
| |
| |
| static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy) |
| { |
| cpufreq_frequency_table_put_attr(policy->cpu); |
| return 0; |
| } |
| |
| static unsigned int cpufreq_p4_get(unsigned int cpu) |
| { |
| u32 l, h; |
| |
| rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); |
| |
| if (l & 0x10) { |
| l = l >> 1; |
| l &= 0x7; |
| } else |
| l = DC_DISABLE; |
| |
| if (l != DC_DISABLE) |
| return stock_freq * l / 8; |
| |
| return stock_freq; |
| } |
| |
| static struct freq_attr *p4clockmod_attr[] = { |
| &cpufreq_freq_attr_scaling_available_freqs, |
| NULL, |
| }; |
| |
| static struct cpufreq_driver p4clockmod_driver = { |
| .verify = cpufreq_p4_verify, |
| .target = cpufreq_p4_target, |
| .init = cpufreq_p4_cpu_init, |
| .exit = cpufreq_p4_cpu_exit, |
| .get = cpufreq_p4_get, |
| .name = "p4-clockmod", |
| .owner = THIS_MODULE, |
| .attr = p4clockmod_attr, |
| }; |
| |
| static const struct x86_cpu_id cpufreq_p4_id[] = { |
| { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ACC }, |
| {} |
| }; |
| |
| /* |
| * Intentionally no MODULE_DEVICE_TABLE here: this driver should not |
| * be auto loaded. Please don't add one. |
| */ |
| |
| static int __init cpufreq_p4_init(void) |
| { |
| int ret; |
| |
| /* |
| * THERM_CONTROL is architectural for IA32 now, so |
| * we can rely on the capability checks |
| */ |
| if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI)) |
| return -ENODEV; |
| |
| ret = cpufreq_register_driver(&p4clockmod_driver); |
| if (!ret) |
| printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock " |
| "Modulation available\n"); |
| |
| return ret; |
| } |
| |
| |
| static void __exit cpufreq_p4_exit(void) |
| { |
| cpufreq_unregister_driver(&p4clockmod_driver); |
| } |
| |
| |
| MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>"); |
| MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); |
| MODULE_LICENSE("GPL"); |
| |
| late_initcall(cpufreq_p4_init); |
| module_exit(cpufreq_p4_exit); |