blob: a9fc0db5c06a4836438046831f1666c3556e287e [file] [log] [blame]
/* Copyright (c) 2010, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __PMIC8058_PWM_H__
#define __PMIC8058_PWM_H__
/* The MAX value is computation limit. Hardware limit is 393 seconds. */
#define PM_PWM_PERIOD_MAX (274 * USEC_PER_SEC)
/* The MIN value is hardware limit. */
#define PM_PWM_PERIOD_MIN 7 /* micro seconds */
struct pm8058_pwm_pdata {
int (*config)(struct pwm_device *pwm, int ch, int on);
int (*enable)(struct pwm_device *pwm, int ch, int on);
};
#define PM_PWM_LUT_SIZE 64
#define PM_PWM_LUT_DUTY_TIME_MAX 512 /* ms */
#define PM_PWM_LUT_PAUSE_MAX (7000 * PM_PWM_LUT_DUTY_TIME_MAX)
/* Flags for Look Up Table */
#define PM_PWM_LUT_LOOP 0x01
#define PM_PWM_LUT_RAMP_UP 0x02
#define PM_PWM_LUT_REVERSE 0x04
#define PM_PWM_LUT_PAUSE_HI_EN 0x10
#define PM_PWM_LUT_PAUSE_LO_EN 0x20
#define PM_PWM_LUT_NO_TABLE 0x100
/* PWM LED ID */
#define PM_PWM_LED_0 0
#define PM_PWM_LED_1 1
#define PM_PWM_LED_2 2
#define PM_PWM_LED_KPD 3
#define PM_PWM_LED_FLASH 4
#define PM_PWM_LED_FLASH1 5
/* PWM LED configuration mode */
#define PM_PWM_CONF_NONE 0x0
#define PM_PWM_CONF_PWM1 0x1
#define PM_PWM_CONF_PWM2 0x2
#define PM_PWM_CONF_PWM3 0x3
#define PM_PWM_CONF_DTEST1 0x4
#define PM_PWM_CONF_DTEST2 0x5
#define PM_PWM_CONF_DTEST3 0x6
#define PM_PWM_CONF_DTEST4 0x7
/**
* PWM frequency/period control
*
* PWM Frequency = ClockFrequency / (N * T)
* or
* PWM Period = Clock Period * (N * T)
* where
* N = 2^9 or 2^6 for 9-bit or 6-bit PWM size
* T = Pre-divide * 2^m, m = 0..7 (exponent)
*
*/
enum pm_pwm_size {
PM_PWM_SIZE_6BIT = 6,
PM_PWM_SIZE_9BIT = 9,
};
enum pm_pwm_clk {
PM_PWM_CLK_1KHZ,
PM_PWM_CLK_32KHZ,
PM_PWM_CLK_19P2MHZ,
};
enum pm_pwm_pre_div {
PM_PWM_PDIV_2,
PM_PWM_PDIV_3,
PM_PWM_PDIV_5,
PM_PWM_PDIV_6,
};
/**
* struct pm8058_pwm_period - PWM period structure
* @pwm_size: enum pm_pwm_size
* @clk: enum pm_pwm_clk
* @pre_div: enum pm_pwm_pre_div
* @pre_div_exp: exponent of 2 as part of pre-divider: 0..7
*/
struct pm8058_pwm_period {
enum pm_pwm_size pwm_size;
enum pm_pwm_clk clk;
enum pm_pwm_pre_div pre_div;
int pre_div_exp;
};
/**
* pm8058_pwm_config_period - change PWM period
*
* @pwm: the PWM device
* @pwm_p: period in struct pm8058_pwm_period
*/
int pm8058_pwm_config_period(struct pwm_device *pwm,
struct pm8058_pwm_period *pwm_p);
/**
* pm8058_pwm_config_duty_cycle - change PWM duty cycle
*
* @pwm: the PWM device
* @pwm_value: the duty cycle in raw PWM value (< 2^pwm_size)
*/
int pm8058_pwm_config_duty_cycle(struct pwm_device *pwm, int pwm_value);
/**
* pm8058_pwm_lut_config - change a PWM device configuration to use LUT
*
* @pwm: the PWM device
* @period_us: period in micro second
* @duty_pct: arrary of duty cycles in percent, like 20, 50.
* @duty_time_ms: time for each duty cycle in millisecond
* @start_idx: start index in lookup table from 0 to MAX-1
* @idx_len: number of index
* @pause_lo: pause time in millisecond at low index
* @pause_hi: pause time in millisecond at high index
* @flags: control flags
*/
int pm8058_pwm_lut_config(struct pwm_device *pwm, int period_us,
int duty_pct[], int duty_time_ms, int start_idx,
int len, int pause_lo, int pause_hi, int flags);
/**
* pm8058_pwm_lut_enable - control a PWM device to start/stop LUT ramp
*
* @pwm: the PWM device
* @start: to start (1), or stop (0)
*/
int pm8058_pwm_lut_enable(struct pwm_device *pwm, int start);
int pm8058_pwm_set_dtest(struct pwm_device *pwm, int enable);
int pm8058_pwm_config_led(struct pwm_device *pwm, int id,
int mode, int max_current);
#endif /* __PMIC8058_PWM_H__ */