config ARM64
	def_bool y
	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
	select ARCH_SUPPORTS_ATOMIC_RMW
	select ARCH_USE_CMPXCHG_LOCKREF
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
	select ARCH_WANT_FRAME_POINTERS
	select ARM_AMBA
	select ARM_ARCH_TIMER
	select ARM_GIC
	select AUDIT_ARCH_COMPAT_GENERIC
	select BUILDTIME_EXTABLE_SORT
	select CLONE_BACKWARDS
	select COMMON_CLK if !ARCH_MSM
	select CPU_PM if (SUSPEND || CPU_IDLE)
	select DCACHE_WORD_ACCESS
	select EDAC_SUPPORT
	select GENERIC_CLOCKEVENTS
	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
	select GENERIC_CPU_AUTOPROBE
	select GENERIC_EARLY_IOREMAP
	select GENERIC_IOMAP
	select GENERIC_IRQ_PROBE
	select GENERIC_IRQ_SHOW
	select GENERIC_SCHED_CLOCK
	select GENERIC_SMP_IDLE_THREAD
	select GENERIC_STRNCPY_FROM_USER
	select GENERIC_STRNLEN_USER
	select GENERIC_TIME_VSYSCALL
	select HARDIRQS_SW_RESEND
	select HAVE_ARCH_AUDITSYSCALL
	select HAVE_ARCH_JUMP_LABEL
	select HAVE_ARCH_KGDB
	select HAVE_ARCH_SECCOMP_FILTER
	select HAVE_ARCH_TRACEHOOK
	select HAVE_C_RECORDMCOUNT
	select HAVE_CC_STACKPROTECTOR
	select HAVE_DEBUG_BUGVERBOSE
	select HAVE_DEBUG_KMEMLEAK
	select HAVE_DMA_API_DEBUG
	select HAVE_DMA_ATTRS
	select HAVE_DMA_CONTIGUOUS
	select HAVE_DYNAMIC_FTRACE
	select HAVE_EFFICIENT_UNALIGNED_ACCESS
	select HAVE_FTRACE_MCOUNT_RECORD
	select HAVE_FUNCTION_TRACER
	select HAVE_FUNCTION_GRAPH_TRACER
	select HAVE_GENERIC_DMA_COHERENT
	select HAVE_IRQ_TIME_ACCOUNTING
	select HAVE_MEMBLOCK
	select HAVE_PATA_PLATFORM
	select HAVE_PERF_EVENTS
	select HAVE_SYSCALL_TRACEPOINTS
	select HAVE_PERF_REGS
	select HAVE_PERF_USER_STACK_DUMP
	select IRQ_DOMAIN
	select MODULES_USE_ELF_RELA
	select NO_BOOTMEM
	select OF
	select OF_EARLY_FLATTREE
	select OF_RESERVED_MEM
	select PERF_USE_VMALLOC
	select POWER_RESET
	select POWER_SUPPLY
	select RTC_LIB
	select SPARSE_IRQ
	select SYSCTL_EXCEPTION_TRACE
	select MSM_JTAGV8 if CORESIGHT_ETMV4
	help
	  ARM 64-bit (AArch64) Linux support.

config 64BIT
	def_bool y

config ARCH_PHYS_ADDR_T_64BIT
	def_bool y

config MMU
	def_bool y

config NO_IOPORT_MAP
	def_bool y

config ILLEGAL_POINTER_VALUE
	hex
	default 0xdead000000000000

config STACKTRACE_SUPPORT
	def_bool y

config LOCKDEP_SUPPORT
	def_bool y

config TRACE_IRQFLAGS_SUPPORT
	def_bool y

config RWSEM_XCHGADD_ALGORITHM
	def_bool y

config GENERIC_BUG
	def_bool y
	depends on BUG

config GENERIC_HWEIGHT
	def_bool y

config GENERIC_CSUM
        def_bool y

config GENERIC_CALIBRATE_DELAY
	def_bool y

config ZONE_DMA
	def_bool y

config ARCH_DMA_ADDR_T_64BIT
	def_bool y

config NEED_DMA_MAP_STATE
	def_bool y

config NEED_SG_DMA_LENGTH
	def_bool y

config ARM64_DMA_USE_IOMMU
	bool
	select ARM_HAS_SG_CHAIN
	select NEED_SG_DMA_LENGTH

if ARM64_DMA_USE_IOMMU

config ARM64_DMA_IOMMU_ALIGNMENT
	int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers"
	range 4 9
	default 8
	help
	  DMA mapping framework by default aligns all buffers to the smallest
	  PAGE_SIZE order which is greater than or equal to the requested buffer
	  size. This works well for buffers up to a few hundreds kilobytes, but
	  for larger buffers it just a waste of address space. Drivers which has
	  relatively small addressing window (like 64Mib) might run out of
	  virtual space with just a few allocations.

	  With this parameter you can specify the maximum PAGE_SIZE order for
	  DMA IOMMU buffers. Larger buffers will be aligned only to this
	  specified order. The order is expressed as a power of two multiplied
	  by the PAGE_SIZE.

endif

config SWIOTLB
	def_bool y

config IOMMU_HELPER
	def_bool SWIOTLB

config KERNEL_MODE_NEON
	def_bool y

config ARCH_HAS_CPUFREQ
	bool
	help
	  Internal node to signify that the ARCH has CPUFREQ support
	  and that the relevant menu configurations are displayed for
	  it.

config FIX_EARLYCON_MEM
	def_bool y

source "init/Kconfig"

source "kernel/Kconfig.freezer"

menu "Platform selection"

config ARCH_VEXPRESS
	bool "ARMv8 software model (Versatile Express)"
	select ARCH_REQUIRE_GPIOLIB
	select COMMON_CLK_VERSATILE
	select POWER_RESET_VEXPRESS
	select VEXPRESS_CONFIG
	help
	  This enables support for the ARMv8 software model (Versatile
	  Express).

config ARCH_MSM
	bool "Qualcomm Platforms"
	select ARCH_REQUIRE_GPIOLIB
	select CLKDEV_LOOKUP
	select HAVE_CLK
	select HAVE_CLK_PREPARE
	select MSM_IRQ
	select PINCTRL
	select SOC_BUS
	select PCI
	select ARCH_HAS_CPUFREQ
	select CPU_FREQ_MSM
	select PM_OPP
	select PM_DEVFREQ
	select MSM_DEVFREQ_DEVBW
	select MSM_BIMC_BWMON
	select DEVFREQ_GOV_MSM_BW_HWMON
	select DEVFREQ_SIMPLE_DEV
	help
	  This enables support for the ARMv8 based Qualcomm chipsets.

config ARCH_MSM8916
	bool "Enable Support for Qualcomm MSM8916"
	depends on ARCH_MSM
	help
	  This enables support for the MSM8916 chipset. If you dont
	  know what do here, say N

config ARCH_MSM8994
	bool "Enable Support for Qualcomm MSM8994"
	depends on ARCH_MSM
	help
	  This enables support for the MSM8994 chipset. If you dont
	  know what do here, say N

config ARCH_MSM8994_V1_TLBI_WA
	bool "Enable MSM8994 v1 TLBI workaround"
	depends on ARCH_MSM8994
	help
	  This enables support for the MSM8994 v1 TLBI workaround. This
	  workaround is required for MSM8994 V1 revision where the
	  [39:38] bits of VA are tied to zero and due to which TLBI
	  operations with VA or ASID will not work.

config MSM8994_V1_PMUIRQ_WA
	bool "Enable MSM8994 v1 PMU-CTI IRQ workaround"
	depends on ARCH_MSM8994 && CORESIGHT_CTI
	help
	  This enables support for the MSM8994 v1 PMU-CTI IRQ workaround.
	  This workaround is required for MSM8994 V1 revision where the
	  percpu PMU interrupt is incorrectly connected to the corresponding
	  CPUs in the other cluster.

config ARCH_MSM8992
	bool "Enable Support for Qualcomm MSM8992"
	depends on ARCH_MSM
	help
	  Enable kernel support for the MSM8992 chipset. If you don't
	  know what this is, you can safely say 'N' here.

config ARCH_XGENE
	bool "AppliedMicro X-Gene SOC Family"
	help
	  This enables support for AppliedMicro X-Gene SOC Family

endmenu

menu "Bus support"

config ARM_AMBA
	bool

config PCI
       bool "PCI support"
       help
         Find out whether you have a PCI motherboard. PCI is the name of a
         bus system, i.e. the way the CPU talks to the other stuff inside
         your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
         VESA. If you have PCI, say Y, otherwise N.

config PCI_DOMAINS
       bool
       depends on PCI

config PCI_SYSCALL
       def_bool PCI

source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
endmenu

menu "Kernel Features"

config ARM64_DCACHE_DISABLE
	bool "Disable CPU Data Caches"
	help
	  Disable CPU data cache usage by setting the SCTLR[C] bit during
	  kernel initialization. This will result in a considerable
	  performance impact, but may be useful in certain situations.

	  If you are not sure what to do, select 'N' here.

config ARM64_ICACHE_DISABLE
	bool "Disable CPU Instruction Caches"
	help
	  Disable CPU instruction cache usage by setting the SCTLR[I]
	  bit during kernel initialization. This will result in a
	  considerable performance impact, but may be useful in certain
	  situations.

	  If you are not sure what to do, select 'N' here.

config ARM64_64K_PAGES
	bool "Enable 64KB pages support"
	help
	  This feature enables 64KB pages support (4KB by default)
	  allowing only two levels of page tables and faster TLB
	  look-up. AArch32 emulation is not available when this feature
	  is enabled.

config CPU_BIG_ENDIAN
       bool "Build big-endian kernel"
       help
         Say Y if you plan on running a kernel in big-endian mode.

config ARM64_ERRATUM_845719
	bool "Cortex-A53: 845719: a load might read incorrect data"
	depends on COMPAT
	default y
	help
	  This option adds an alternative code sequence to work around ARM
	  erratum 845719 on Cortex-A53 parts up to r0p4.

	  When running a compat (AArch32) userspace on an affected Cortex-A53
	  part, a load at EL0 from a virtual address that matches the bottom 32
	  bits of the virtual address used by a recent load at (AArch64) EL1
	  might return incorrect data.

	  The workaround is to write the contextidr_el1 register on exception
	  return to a 32-bit task.
	  Please note that this does not necessarily enable the workaround,
	  as it depends on the alternative framework, which will only patch
	  the kernel if an affected CPU is detected.

	  If unsure, say Y.

config ARM64_A57_ERRATA_832075
	bool "ARMv8 A57 Errata 832075"
	help
	  This Erratum explains the problem that a Cortex-A57 might deadlock
	  when WB exclusive load/store instructions are mixed with device loads.
	  An interrupt will break the deadlock.
	  This erratum requires a particular sequence of the code:
	  a) A pair of exclusive load and exclusive store instructions.
	  The exclusive store is to write-back memory location.
	  b) A branch instruction has a source register which is the same as
	  the destination register of the older exclusive store.
	  c) Following the branch instruction, there are six or more loads
	  to device memory locations

config ARM64_SEV_IN_LOCK_UNLOCK
	bool "Add explicit SEV in the spinlock unlock code path"
	def_bool ARCH_MSM8994
	help
	  In certain unexplained cases, the stlr alone might not wakeup
	  the processor waiting in WFE on a spinlock.
	  Add an explicity dsb and SEV in write_unlock, read_unlock
	  and spin_unlock to ensure that the core waiting on the lock
	  wakes up from WFE.

config SMP
	bool "Symmetric Multi-Processing"
	help
	  This enables support for systems with more than one CPU.  If
	  you say N here, the kernel will run on single and
	  multiprocessor machines, but will use only one CPU of a
	  multiprocessor machine. If you say Y here, the kernel will run
	  on many, but not all, single processor machines. On a single
	  processor machine, the kernel will run faster if you say N
	  here.

	  If you don't know what to do here, say N.

config SCHED_MC
	bool "Multi-core scheduler support"
	depends on SMP
	help
	  Multi-core scheduler support improves the CPU scheduler's decision
	  making when dealing with multi-core CPU chips at a cost of slightly
	  increased overhead in some places. If unsure say N here.

config SCHED_SMT
	bool "SMT scheduler support"
	depends on SMP
	help
	  Improves the CPU scheduler's decision making when dealing with
	  MultiThreading at a cost of slightly increased overhead in some
	  places. If unsure say N here.

config ARCH_WANTS_CTXSW_LOGGING
	bool "Enable logging in context switch"
	depends on SMP
	help
	  Logs critical context switch latencies. If unsure say N here.

config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	# These have to remain sorted largest to smallest
	default "8"

config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs"
	depends on SMP
	help
	  Say Y here to experiment with turning CPUs off and on.  CPUs
	  can be controlled through /sys/devices/system/cpu.

source kernel/Kconfig.preempt

config SWP_EMULATE
	bool "Emulate SWP/SWPB instructions"
	help
	  ARMv6 architecture deprecates use of the SWP/SWPB instructions. ARMv8
	  oblosetes the use of SWP/SWPB instructions. ARMv7 multiprocessing
	  extensions introduce the ability to disable these instructions,
	  triggering an undefined instruction exception when executed. Say Y
	  here to enable software emulation of these instructions for userspace
	  (not kernel) using LDREX/STREX. Also creates /proc/cpu/swp_emulation
	  for statistics.

	  In some older versions of glibc [<=2.8] SWP is used during futex
	  trylock() operations with the assumption that the code will not
	  be preempted. This invalid assumption may be more likely to fail
	  with SWP emulation enabled, leading to deadlock of the user
	  application.

	  NOTE: when accessing uncached shared regions, LDREX/STREX rely
	  on an external transaction monitoring block called a global
	  monitor to maintain update atomicity. If your system does not
	  implement a global monitor, this option can cause programs that
	  perform SWP operations to uncached memory to deadlock.

	  If unsure, say Y.

source kernel/Kconfig.hz

config ARCH_HAS_HOLES_MEMORYMODEL
	def_bool y if SPARSEMEM

config ARCH_SPARSEMEM_ENABLE
	def_bool y
	select SPARSEMEM_VMEMMAP_ENABLE

config ARCH_SPARSEMEM_DEFAULT
	def_bool ARCH_SPARSEMEM_ENABLE

config ARCH_SELECT_MEMORY_MODEL
	def_bool ARCH_SPARSEMEM_ENABLE

config HAVE_ARCH_PFN_VALID
	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM

config HW_PERF_EVENTS
	bool "Enable hardware performance counter support for perf events"
	depends on PERF_EVENTS
	default y
	help
	  Enable hardware performance counter support for perf events. If
	  disabled, perf events will use software events only.

config PERF_EVENTS_USERMODE
	bool "Enable usermode access for perf events"
	depends on PERF_EVENTS
	help
	  Enable user-mode access to performance counters for perf events.
	  If enabled, the access permissions allowing CPU performance
	  counters to be accessed from user-mode are set.

	  If you want user-mode programs to access perf events, say Y

config PERF_EVENTS_RESET_PMU_DEBUGFS
	bool "Reset PMU via debugfs node"
	depends on PERF_EVENTS
	help
		Enable the debugfs node that can be used to reset PMUs and all
		state variables associated with PMUs. If enabled, PMU and internal
		state variable are cleared.
		If you want to reset PMU and PMU related internal Perf variables
		via debugfs then say Y.

config SYS_SUPPORTS_HUGETLBFS
	def_bool y

config ARCH_WANT_GENERAL_HUGETLB
	def_bool y

config ARCH_WANT_HUGE_PMD_SHARE
	def_bool y if !ARM64_64K_PAGES

config HAVE_ARCH_TRANSPARENT_HUGEPAGE
	def_bool y

config ARCH_HAS_CACHE_LINE_SIZE
	def_bool y

config ARMV7_COMPAT
	bool "Kernel support for ARMv7 applications"
	depends on COMPAT
	select SWP_EMULATE
	help
	 This option enables features that allow that ran on an ARMv7 or older
	 processor to continue functioning.

	 If you want to execute ARMv7 applications, say Y

config ARMV7_COMPAT_CPUINFO
	bool "Report backwards compatible cpu features in /proc/cpuinfo"
	depends on ARMV7_COMPAT
	default y
	help
	 This option makes /proc/cpuinfo list CPU features that an ARMv7 or
	 earlier kernel would report, but are not optional on an ARMv8 or later
	 processor.

	 If you want to execute ARMv7 applications, say Y

source "mm/Kconfig"

config SECCOMP
	bool "Enable seccomp to safely compute untrusted bytecode"
	---help---
	  This kernel feature is useful for number crunching applications
	  that may need to compute untrusted bytecode during their
	  execution. By using pipes or other transports made available to
	  the process as file descriptors supporting the read/write
	  syscalls, it's possible to isolate those applications in
	  their own address space using seccomp. Once seccomp is
	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
	  and the task is only allowed to execute a few safe syscalls
	  defined by each seccomp mode.

config XEN_DOM0
	def_bool y
	depends on XEN

config XEN
	bool "Xen guest support on ARM64 (EXPERIMENTAL)"
	depends on ARM64 && OF
	select SWIOTLB_XEN
	help
	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.

config FORCE_MAX_ZONEORDER
	int
	default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE)
	default "11"

endmenu

menu "Boot options"

config CMDLINE
	string "Default kernel command string"
	default ""
	help
	  Provide a set of default command-line options at build time by
	  entering them here. As a minimum, you should specify the the
	  root device (e.g. root=/dev/nfs).

choice
	prompt "Kernel command line type" if CMDLINE != ""
	default CMDLINE_FROM_BOOTLOADER

config CMDLINE_FROM_BOOTLOADER
	bool "Use bootloader kernel arguments if available"
	help
	  Uses the command-line options passed by the boot loader. If
	  the boot loader doesn't provide any, the default kernel command
	  string provided in CMDLINE will be used.

config CMDLINE_EXTEND
	bool "Extend bootloader kernel arguments"
	help
	  The command-line arguments provided by the boot loader will be
	  appended to the default kernel command string.

config CMDLINE_FORCE
	bool "Always use the default kernel command string"
	help
	  Always use the default kernel command string, even if the boot
	  loader passes other arguments to the kernel.
	  This is useful if you cannot or don't want to change the
	  command-line options your boot loader passes to the kernel.
endchoice

config BUILD_ARM64_APPENDED_DTB_IMAGE
	bool "Build a concatenated Image.gz/dtb by default"
	depends on OF
	help
	  Enabling this option will cause a concatenated Image.gz and list of
	  DTBs to be built by default (instead of a standalone Image.gz.)
	  The image will built in arch/arm64/boot/Image.gz-dtb

config BUILD_ARM64_UNCOMPRESSED_APPENDED_DTB_IMAGE
	bool "Build a concatenated Image/dtb by default"
	depends on OF
	help
	  Enabling this option will cause a concatenated Image and list of
	  DTBs to be built by default (instead of a standalone Image.)
	  The image will built in arch/arm64/boot/Image-dtb

config BUILD_ARM64_APPENDED_DTB_IMAGE_NAMES
	string "Default dtb names"
	depends on BUILD_ARM64_APPENDED_DTB_IMAGE || BUILD_ARM64_UNCOMPRESSED_APPENDED_DTB_IMAGE
	help
	  Space separated list of names of dtbs to append when
	  building a concatenated Image.gz-dtb or Image-dtb.

config EFI
	bool "UEFI runtime support"
	depends on OF && !CPU_BIG_ENDIAN
	select LIBFDT
	select UCS2_STRING
	select EFI_PARAMS_FROM_FDT
	help
	  This option provides support for runtime services provided
	  by UEFI firmware (such as non-volatile variables, realtime
          clock, and platform reset). A UEFI stub is also provided to
	  allow the kernel to be booted as an EFI application. This
	  is only useful on systems that have UEFI firmware.

endmenu

menu "Userspace binary formats"

source "fs/Kconfig.binfmt"

config COMPAT
	bool "Kernel support for 32-bit EL0"
	depends on !ARM64_64K_PAGES
	select COMPAT_BINFMT_ELF
	select HAVE_UID16
	select OLD_SIGSUSPEND3
	select COMPAT_OLD_SIGACTION
	help
	  This option enables support for a 32-bit EL0 running under a 64-bit
	  kernel at EL1. AArch32-specific components such as system calls,
	  the user helper functions, VFP support and the ptrace interface are
	  handled appropriately by the kernel.

	  If you want to execute 32-bit userspace applications, say Y.

config SYSVIPC_COMPAT
	def_bool y
	depends on COMPAT && SYSVIPC

endmenu

menu "Power management options"

source "kernel/power/Kconfig"

config ARCH_SUSPEND_POSSIBLE
	def_bool y

config ARM64_CPU_SUSPEND
	def_bool PM_SLEEP

endmenu

menu "CPU Power Management"

if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
endif

source "drivers/cpuidle/Kconfig"

endmenu

source "net/Kconfig"

source "drivers/Kconfig"

source "drivers/firmware/Kconfig"

source "fs/Kconfig"

source "arch/arm64/kvm/Kconfig"

source "arch/arm64/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"
if CRYPTO
source "arch/arm64/crypto/Kconfig"
endif

source "lib/Kconfig"

source "arch/arm64/mm/Kconfig"