| # |
| # PINCTRL infrastructure and drivers |
| # |
| |
| config PINCTRL |
| bool |
| |
| if PINCTRL |
| |
| menu "Pin controllers" |
| depends on PINCTRL |
| |
| config PINMUX |
| bool "Support pin multiplexing controllers" |
| |
| config PINCONF |
| bool "Support pin configuration controllers" |
| |
| config GENERIC_PINCONF |
| bool |
| select PINCONF |
| |
| config DEBUG_PINCTRL |
| bool "Debug PINCTRL calls" |
| depends on DEBUG_KERNEL |
| help |
| Say Y here to add some extra checks and diagnostics to PINCTRL calls. |
| |
| config PINCTRL_ABX500 |
| bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions" |
| depends on AB8500_CORE |
| select GENERIC_PINCONF |
| help |
| Select this to enable the ABx500 family IC GPIO driver |
| |
| config PINCTRL_AB8500 |
| bool "AB8500 pin controller driver" |
| depends on PINCTRL_ABX500 && ARCH_U8500 |
| |
| config PINCTRL_AB8540 |
| bool "AB8540 pin controller driver" |
| depends on PINCTRL_ABX500 && ARCH_U8500 |
| |
| config PINCTRL_AB9540 |
| bool "AB9540 pin controller driver" |
| depends on PINCTRL_ABX500 && ARCH_U8500 |
| |
| config PINCTRL_AB8505 |
| bool "AB8505 pin controller driver" |
| depends on PINCTRL_ABX500 && ARCH_U8500 |
| |
| config PINCTRL_AT91 |
| bool "AT91 pinctrl driver" |
| depends on OF |
| depends on ARCH_AT91 |
| select PINMUX |
| select PINCONF |
| help |
| Say Y here to enable the at91 pinctrl driver |
| |
| config PINCTRL_BCM2835 |
| bool |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_IMX |
| bool |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_IMX35 |
| bool "IMX35 pinctrl driver" |
| depends on OF |
| depends on SOC_IMX35 |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the imx35 pinctrl driver |
| |
| config PINCTRL_IMX51 |
| bool "IMX51 pinctrl driver" |
| depends on OF |
| depends on SOC_IMX51 |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the imx51 pinctrl driver |
| |
| config PINCTRL_IMX53 |
| bool "IMX53 pinctrl driver" |
| depends on OF |
| depends on SOC_IMX53 |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the imx53 pinctrl driver |
| |
| config PINCTRL_IMX6Q |
| bool "IMX6Q/DL pinctrl driver" |
| depends on OF |
| depends on SOC_IMX6Q |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the imx6q/dl pinctrl driver |
| |
| config PINCTRL_IMX6SL |
| bool "IMX6SL pinctrl driver" |
| depends on OF |
| depends on SOC_IMX6SL |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the imx6sl pinctrl driver |
| |
| config PINCTRL_LANTIQ |
| bool |
| depends on LANTIQ |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_FALCON |
| bool |
| depends on SOC_FALCON |
| depends on PINCTRL_LANTIQ |
| |
| config PINCTRL_MXS |
| bool |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_IMX23 |
| bool |
| select PINCTRL_MXS |
| |
| config PINCTRL_IMX28 |
| bool |
| select PINCTRL_MXS |
| |
| config PINCTRL_NOMADIK |
| bool "Nomadik pin controller driver" |
| depends on ARCH_U8500 || ARCH_NOMADIK |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_STN8815 |
| bool "STN8815 pin controller driver" |
| depends on PINCTRL_NOMADIK && ARCH_NOMADIK |
| |
| config PINCTRL_DB8500 |
| bool "DB8500 pin controller driver" |
| depends on PINCTRL_NOMADIK && ARCH_U8500 |
| |
| config PINCTRL_DB8540 |
| bool "DB8540 pin controller driver" |
| depends on PINCTRL_NOMADIK && ARCH_U8500 |
| |
| config PINCTRL_SINGLE |
| tristate "One-register-per-pin type device tree based pinctrl driver" |
| depends on OF |
| select PINMUX |
| select PINCONF |
| select GENERIC_PINCONF |
| help |
| This selects the device tree based generic pinctrl driver. |
| |
| config USE_PINCTRL_IRQ |
| default n |
| bool "Use Pinctrl IRQ chip" |
| help |
| Use Irq chip with Pinctrl subsystem instead of the irq chip |
| associated with gpio lib. The pinctrl irq chip allows the pin |
| attributes to be configured, prior to configuring them as |
| interrupt triggers. |
| |
| config PINCTRL_MSM_TLMM |
| bool "MSM TLMM pinctrl driver" |
| depends on OF && ARCH_MSM |
| select PINMUX |
| select GENERIC_PINCONF |
| |
| config PINCTRL_SIRF |
| bool "CSR SiRFprimaII/SiRFmarco pin controller driver" |
| depends on ARCH_SIRF |
| select PINMUX |
| |
| config PINCTRL_SUNXI |
| bool |
| select PINMUX |
| select GENERIC_PINCONF |
| |
| config PINCTRL_TEGRA |
| bool |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_TEGRA20 |
| bool |
| select PINCTRL_TEGRA |
| |
| config PINCTRL_TEGRA30 |
| bool |
| select PINCTRL_TEGRA |
| |
| config PINCTRL_TEGRA114 |
| bool |
| select PINCTRL_TEGRA |
| |
| config PINCTRL_U300 |
| bool "U300 pin controller driver" |
| depends on ARCH_U300 |
| select PINMUX |
| select GENERIC_PINCONF |
| |
| config PINCTRL_COH901 |
| bool "ST-Ericsson U300 COH 901 335/571 GPIO" |
| depends on GPIOLIB && ARCH_U300 && PINCTRL_U300 |
| help |
| Say yes here to support GPIO interface on ST-Ericsson U300. |
| The names of the two IP block variants supported are |
| COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 |
| ports of 8 GPIO pins each. |
| |
| config PINCTRL_SAMSUNG |
| bool |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_EXYNOS |
| bool "Pinctrl driver data for Samsung EXYNOS SoCs" |
| depends on OF && GPIOLIB |
| select PINCTRL_SAMSUNG |
| |
| config PINCTRL_EXYNOS5440 |
| bool "Samsung EXYNOS5440 SoC pinctrl driver" |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_S3C64XX |
| bool "Samsung S3C64XX SoC pinctrl driver" |
| depends on ARCH_S3C64XX |
| select PINCTRL_SAMSUNG |
| |
| source "drivers/pinctrl/mvebu/Kconfig" |
| source "drivers/pinctrl/sh-pfc/Kconfig" |
| source "drivers/pinctrl/spear/Kconfig" |
| source "drivers/pinctrl/vt8500/Kconfig" |
| |
| config PINCTRL_XWAY |
| bool |
| depends on SOC_TYPE_XWAY |
| depends on PINCTRL_LANTIQ |
| |
| endmenu |
| |
| endif |