Google Git
Sign in
android / kernel / msm-modules / qca-wfi-host-cmn / d369beb4a123eb3f474025223bde8c73aaf89fe6 / . / wmi / inc / wmi_unified_param.h
blob: d4ded31ea4154a4280a18347230b41852005a54d [file] [log] [blame]
/*
* Copyright (c) 2016-2018 The Linux Foundation. All rights reserved.
*
* Previously licensed under the ISC license by Qualcomm Atheros, Inc.
*
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
/*
* This file was originally distributed by Qualcomm Atheros, Inc.
* under proprietary terms before Copyright ownership was assigned
* to the Linux Foundation.
*/
/*
* This file contains the API definitions for the Unified Wireless Module
* Interface (WMI).
*/
#ifndef _WMI_UNIFIED_PARAM_H_
#define _WMI_UNIFIED_PARAM_H_
#define MAC_MAX_KEY_LENGTH 32
#define MAC_PN_LENGTH 8
#define MAX_MAC_HEADER_LEN 32
#define MIN_MAC_HEADER_LEN 24
#define QOS_CONTROL_LEN 2
#define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */
#define WMI_MAC_MAX_SSID_LENGTH 32
#define WMI_SCAN_MAX_NUM_SSID 0x0A
#define mgmt_tx_dl_frm_len 64
#define WMI_SMPS_MASK_LOWER_16BITS 0xFF
#define WMI_SMPS_MASK_UPPER_3BITS 0x7
#define WMI_SMPS_PARAM_VALUE_S 29
#define WMI_MAX_NUM_ARGS 8
/* The size of the utc time in bytes. */
#define WMI_SIZE_UTC_TIME (10)
/* The size of the utc time error in bytes. */
#define WMI_SIZE_UTC_TIME_ERROR (5)
#define WMI_MCC_MIN_CHANNEL_QUOTA 20
#define WMI_MCC_MAX_CHANNEL_QUOTA 80
#define WMI_MCC_MIN_NON_ZERO_CHANNEL_LATENCY 30
#define WMI_BEACON_TX_BUFFER_SIZE (512)
#define WMI_WIFI_SCANNING_MAC_OUI_LENGTH 3
#define WMI_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS 64
#define WMI_RSSI_THOLD_DEFAULT -300
#define WMI_NLO_FREQ_THRESH 1000
#define WMI_SEC_TO_MSEC(sec) (sec * 1000)
#define WMI_MSEC_TO_USEC(msec) (msec * 1000)
#define WMI_ETH_LEN 64
#define WMI_QOS_NUM_TSPEC_MAX 2
#define WMI_QOS_NUM_AC_MAX 4
#define WMI_IPV4_ADDR_LEN 4
#define WMI_KEEP_ALIVE_NULL_PKT 1
#define WMI_KEEP_ALIVE_UNSOLICIT_ARP_RSP 2
#define WMI_MAC_MAX_KEY_LENGTH 32
#define WMI_KRK_KEY_LEN 16
#ifdef WLAN_FEATURE_ROAM_OFFLOAD
#define WMI_BTK_KEY_LEN 32
#define WMI_ROAM_R0KH_ID_MAX_LEN 48
#define WMI_ROAM_SCAN_PSK_SIZE 32
#endif
#define WMI_NOISE_FLOOR_DBM_DEFAULT (-96)
#define WMI_INVALID_PER_CHAIN_RSSI 0x80
#define WMI_MAC_IPV6_ADDR_LEN 16
#define WMI_OFFLOAD_DISABLE 0
#define WMI_OFFLOAD_ENABLE 1
#ifdef WLAN_NS_OFFLOAD
/* support only one IPv6 offload */
#define WMI_MAC_NS_OFFLOAD_SIZE 1
/* Number of target IP V6 addresses for NS offload */
#define WMI_MAC_NUM_TARGET_IPV6_NS_OFFLOAD_NA 16
#define WMI_IPV6_ADDR_VALID 1
#endif /* WLAN_NS_OFFLOAD */
#define WMI_EXTSCAN_MAX_HOTLIST_SSIDS 8
#define WMI_ROAM_MAX_CHANNELS 80
#ifdef FEATURE_WLAN_EXTSCAN
#define WMI_MAX_EXTSCAN_MSG_SIZE 1536
#define WMI_EXTSCAN_REST_TIME 100
#define WMI_EXTSCAN_MAX_SCAN_TIME 50000
#define WMI_EXTSCAN_BURST_DURATION 150
#endif
#define WMI_SCAN_NPROBES_DEFAULT (2)
#define WMI_SEC_TO_MSEC(sec) (sec * 1000) /* sec to msec */
#define WMI_MSEC_TO_USEC(msec) (msec * 1000) /* msec to usec */
#define WMI_NLO_FREQ_THRESH 1000 /* in MHz */
#define WMI_SVC_MSG_MAX_SIZE 1536
#define MAX_UTF_EVENT_LENGTH 2048
#define MAX_WMI_UTF_LEN 252
#define MAX_WMI_QVIT_LEN 252
#define THERMAL_LEVELS 4
#define WMI_HOST_BCN_FLT_MAX_SUPPORTED_IES 256
#define WMI_HOST_BCN_FLT_MAX_ELEMS_IE_LIST \
(WMI_HOST_BCN_FLT_MAX_SUPPORTED_IES/32)
#define LTEU_MAX_BINS 10
#define ATF_ACTIVED_MAX_CLIENTS 50
#define ATF_ACTIVED_MAX_ATFGROUPS 8
#define CTL_5G_SIZE 1536
#define CTL_2G_SIZE 684
#define MAX_CTL_SIZE (CTL_5G_SIZE > CTL_2G_SIZE ? CTL_5G_SIZE : CTL_2G_SIZE)
#define IEEE80211_MICBUF_SIZE (8+8)
#define IEEE80211_TID_SIZE 17
#define WME_NUM_AC 4
#define SMART_ANT_MODE_SERIAL 0
#define SMART_ANT_MODE_PARALLEL 1
#define IEEE80211_WEP_NKID 4 /* number of key ids */
#define WPI_IV_LEN 16
#define WMI_SCAN_MAX_NUM_BSSID 10
#define MAX_CHANS 1023
#define TARGET_OEM_CONFIGURE_LCI 0x0A
#define RTT_LCI_ALTITUDE_MASK 0x3FFFFFFF
#define TARGET_OEM_CONFIGURE_LCR 0x09
#define RTT_TIMEOUT_MS 180
#define MAX_SUPPORTED_RATES 128
#define WMI_HOST_MAX_BUFFER_SIZE 1712
#define WMI_HAL_MAX_SANTENNA 4
#ifdef CONFIG_WIN
#if ATH_SUPPORT_FIPS
#define FIPS_ALIGN 4
#define FIPS_ALIGNTO(__addr, __to) ((((unsigned long int)(__addr)) + (__to) - 1) & ~((__to) - 1))
#define FIPS_IS_ALIGNED(__addr, __to) (!(((unsigned long int)(__addr)) & ((__to)-1)))
#endif
#endif
#define WMI_HOST_F_MS(_v, _f) \
(((_v) & (_f)) >> (_f##_S))
#define WMI_HOST_F_RMW(_var, _v, _f) \
do { \
(_var) &= ~(_f); \
(_var) |= (((_v) << (_f##_S)) & (_f)); \
} while (0)
/* TXBF capabilities masks */
#define WMI_HOST_TXBF_CONF_SU_TX_BFEE_S 0
#define WMI_HOST_TXBF_CONF_SU_TX_BFEE_M 0x1
#define WMI_HOST_TXBF_CONF_SU_TX_BFEE \
(WMI_HOST_TXBF_CONF_SU_TX_BFEE_M << WMI_HOST_TXBF_CONF_SU_TX_BFEE_S)
#define WMI_HOST_TXBF_CONF_SU_TX_BFEE_GET(x) \
WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_SU_TX_BFEE)
#define WMI_HOST_TXBF_CONF_SU_TX_BFEE_SET(x, z) \
WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_SU_TX_BFEE)
#define WMI_HOST_TXBF_CONF_MU_TX_BFEE_S 1
#define WMI_HOST_TXBF_CONF_MU_TX_BFEE_M 0x1
#define WMI_HOST_TXBF_CONF_MU_TX_BFEE \
(WMI_HOST_TXBF_CONF_MU_TX_BFEE_M << WMI_HOST_TXBF_CONF_MU_TX_BFEE_S)
#define WMI_HOST_TXBF_CONF_MU_TX_BFEE_GET(x) \
WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_MU_TX_BFEE)
#define WMI_HOST_TXBF_CONF_MU_TX_BFEE_SET(x, z) \
WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_MU_TX_BFEE)
#define WMI_HOST_TXBF_CONF_SU_TX_BFER_S 2
#define WMI_HOST_TXBF_CONF_SU_TX_BFER_M 0x1
#define WMI_HOST_TXBF_CONF_SU_TX_BFER \
(WMI_HOST_TXBF_CONF_SU_TX_BFER_M << WMI_HOST_TXBF_CONF_SU_TX_BFER_S)
#define WMI_HOST_TXBF_CONF_SU_TX_BFER_GET(x) \
WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_SU_TX_BFER)
#define WMI_HOST_TXBF_CONF_SU_TX_BFER_SET(x, z) \
WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_SU_TX_BFER)
#define WMI_HOST_TXBF_CONF_MU_TX_BFER_S 3
#define WMI_HOST_TXBF_CONF_MU_TX_BFER_M 0x1
#define WMI_HOST_TXBF_CONF_MU_TX_BFER \
(WMI_HOST_TXBF_CONF_MU_TX_BFER_M << WMI_HOST_TXBF_CONF_MU_TX_BFER_S)
#define WMI_HOST_TXBF_CONF_MU_TX_BFER_GET(x) \
WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_MU_TX_BFER)
#define WMI_HOST_TXBF_CONF_MU_TX_BFER_SET(x, z) \
WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_MU_TX_BFER)
#define WMI_HOST_TXBF_CONF_STS_CAP_S 4
#define WMI_HOST_TXBF_CONF_STS_CAP_M 0x7
#define WMI_HOST_TXBF_CONF_STS_CAP \
(WMI_HOST_TXBF_CONF_STS_CAP_M << WMI_HOST_TXBF_CONF_STS_CAP_S)
#define WMI_HOST_TXBF_CONF_STS_CAP_GET(x) \
WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_STS_CAP);
#define WMI_HOST_TXBF_CONF_STS_CAP_SET(x, z) \
WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_STS_CAP)
#define WMI_HOST_TXBF_CONF_IMPLICIT_BF_S 7
#define WMI_HOST_TXBF_CONF_IMPLICIT_BF_M 0x1
#define WMI_HOST_TXBF_CONF_IMPLICIT_BF \
(WMI_HOST_TXBF_CONF_IMPLICIT_BF_M << WMI_HOST_TXBF_CONF_IMPLICIT_BF_S)
#define WMI_HOST_TXBF_CONF_IMPLICIT_BF_GET(x) \
WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_IMPLICIT_BF)
#define WMI_HOST_TXBF_CONF_IMPLICIT_BF_SET(x, z) \
WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_IMPLICIT_BF)
#define WMI_HOST_TXBF_CONF_BF_SND_DIM_S 8
#define WMI_HOST_TXBF_CONF_BF_SND_DIM_M 0x7
#define WMI_HOST_TXBF_CONF_BF_SND_DIM \
(WMI_HOST_TXBF_CONF_BF_SND_DIM_M << WMI_HOST_TXBF_CONF_BF_SND_DIM_S)
#define WMI_HOST_TXBF_CONF_BF_SND_DIM_GET(x) \
WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_BF_SND_DIM)
#define WMI_HOST_TXBF_CONF_BF_SND_DIM_SET(x, z) \
WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_BF_SND_DIM)
#define WMI_HOST_TPC_RATE_MAX 160
#define WMI_HOST_TPC_TX_NUM_CHAIN 4
#define WMI_HOST_RXG_CAL_CHAN_MAX 4
#define WMI_HOST_MAX_NUM_CHAINS 4
#define WMI_MAX_NUM_OF_RATE_THRESH 4
#define PROBE_REQ_BITMAP_LEN 8
#include "qdf_atomic.h"
#ifdef BIG_ENDIAN_HOST
/* This API is used in copying in elements to WMI message,
since WMI message uses multilpes of 4 bytes, This API
converts length into multiples of 4 bytes, and performs copy
*/
#define WMI_HOST_IF_MSG_COPY_CHAR_ARRAY(destp, srcp, len) do { \
int j; \
u_int32_t *src, *dest; \
src = (u_int32_t *)srcp; \
dest = (u_int32_t *)destp; \
for (j = 0; j < roundup(len, sizeof(u_int32_t))/4; j++) { \
*(dest+j) = qdf_le32_to_cpu(*(src+j)); \
} \
} while (0)
#else
#define WMI_HOST_IF_MSG_COPY_CHAR_ARRAY(destp, srcp, len) OS_MEMCPY(destp,\
srcp, len)
#endif
/** macro to convert MAC address from WMI word format to char array */
#define WMI_HOST_MAC_ADDR_TO_CHAR_ARRAY(pwmi_mac_addr, c_macaddr) do { \
(c_macaddr)[0] = ((pwmi_mac_addr)->mac_addr31to0) & 0xff; \
(c_macaddr)[1] = (((pwmi_mac_addr)->mac_addr31to0) >> 8) & 0xff; \
(c_macaddr)[2] = (((pwmi_mac_addr)->mac_addr31to0) >> 16) & 0xff; \
(c_macaddr)[3] = (((pwmi_mac_addr)->mac_addr31to0) >> 24) & 0xff; \
(c_macaddr)[4] = ((pwmi_mac_addr)->mac_addr47to32) & 0xff; \
(c_macaddr)[5] = (((pwmi_mac_addr)->mac_addr47to32) >> 8) & 0xff; \
} while (0)
#define TARGET_INIT_STATUS_SUCCESS 0x0
#define TARGET_INIT_STATUS_GEN_FAILED 0x1
#define TARGET_GET_INIT_STATUS_REASON(status) ((status) & 0xffff)
#define TARGET_GET_INIT_STATUS_MODULE_ID(status) (((status) >> 16) & 0xffff)
#define MAX_ASSOC_IE_LENGTH 1024
typedef uint32_t TARGET_INIT_STATUS;
/**
* @brief Opaque handle of wmi structure
*/
struct wmi_unified;
typedef struct wmi_unified *wmi_unified_t;
typedef void *ol_scn_t;
/**
* @wmi_event_handler function prototype
*/
typedef int (*wmi_unified_event_handler)(ol_scn_t scn_handle,
uint8_t *event_buf, uint32_t len);
typedef enum {
WMI_HOST_MODE_11A = 0, /* 11a Mode */
WMI_HOST_MODE_11G = 1, /* 11b/g Mode */
WMI_HOST_MODE_11B = 2, /* 11b Mode */
WMI_HOST_MODE_11GONLY = 3, /* 11g only Mode */
WMI_HOST_MODE_11NA_HT20 = 4, /* 11a HT20 mode */
WMI_HOST_MODE_11NG_HT20 = 5, /* 11g HT20 mode */
WMI_HOST_MODE_11NA_HT40 = 6, /* 11a HT40 mode */
WMI_HOST_MODE_11NG_HT40 = 7, /* 11g HT40 mode */
WMI_HOST_MODE_11AC_VHT20 = 8,
WMI_HOST_MODE_11AC_VHT40 = 9,
WMI_HOST_MODE_11AC_VHT80 = 10,
WMI_HOST_MODE_11AC_VHT20_2G = 11,
WMI_HOST_MODE_11AC_VHT40_2G = 12,
WMI_HOST_MODE_11AC_VHT80_2G = 13,
WMI_HOST_MODE_11AC_VHT80_80 = 14,
WMI_HOST_MODE_11AC_VHT160 = 15,
WMI_HOST_MODE_UNKNOWN = 16,
WMI_HOST_MODE_MAX = 16
} WMI_HOST_WLAN_PHY_MODE;
/**
* enum wmi_dwelltime_adaptive_mode: dwelltime_mode
* @WMI_DWELL_MODE_DEFAULT: Use firmware default mode
* @WMI_DWELL_MODE_CONSERVATIVE: Conservative adaptive mode
* @WMI_DWELL_MODE_MODERATE: Moderate adaptive mode
* @WMI_DWELL_MODE_AGGRESSIVE: Aggressive adaptive mode
* @WMI_DWELL_MODE_STATIC: static adaptive mode
*/
enum wmi_dwelltime_adaptive_mode {
WMI_DWELL_MODE_DEFAULT = 0,
WMI_DWELL_MODE_CONSERVATIVE = 1,
WMI_DWELL_MODE_MODERATE = 2,
WMI_DWELL_MODE_AGGRESSIVE = 3,
WMI_DWELL_MODE_STATIC = 4
};
#define MAX_NUM_CHAN 128
/* WME stream classes */
#define WMI_HOST_AC_BE 0 /* best effort */
#define WMI_HOST_AC_BK 1 /* background */
#define WMI_HOST_AC_VI 2 /* video */
#define WMI_HOST_AC_VO 3 /* voice */
#define WMI_TID_TO_AC(_tid) (\
(((_tid) == 0) || ((_tid) == 3)) ? WMI_HOST_AC_BE : \
(((_tid) == 1) || ((_tid) == 2)) ? WMI_HOST_AC_BK : \
(((_tid) == 4) || ((_tid) == 5)) ? WMI_HOST_AC_VI : \
WMI_HOST_AC_VO)
/**
* struct vdev_create_params - vdev create cmd parameter
* @if_id: interface id
* @type: interface type
* @subtype: interface subtype
*/
struct vdev_create_params {
uint8_t if_id;
uint32_t type;
uint32_t subtype;
uint8_t nss_2g;
uint8_t nss_5g;
};
/**
* struct vdev_delete_params - vdev delete cmd parameter
* @if_id: interface id
*/
struct vdev_delete_params {
uint8_t if_id;
};
/**
* struct channel_param - Channel paramters with all
* info required by target.
* @chan_id: channel id
* @pwr: channel power
* @mhz: channel frequency
* @half_rate: is half rate
* @quarter_rate: is quarter rate
* @dfs_set: is dfs channel
* @dfs_set_cfreq2: is secondary freq dfs channel
* @is_chan_passive: is this passive channel
* @allow_ht: HT allowed in chan
* @allow_vht: VHT allowed on chan
* @phy_mode: phymode (vht80 or ht40 or ...)
* @cfreq1: centre frequency on primary
* @cfreq2: centre frequency on secondary
* @maxpower: max power for channel
* @minpower: min power for channel
* @maxreqpower: Max regulatory power
* @antennamac: Max antenna
* @reg_class_id: Regulatory class id.
*/
struct channel_param {
uint8_t chan_id;
uint8_t pwr;
uint32_t mhz;
uint32_t half_rate:1,
quarter_rate:1,
dfs_set:1,
dfs_set_cfreq2:1,
is_chan_passive:1,
allow_ht:1,
allow_vht:1;
uint32_t phy_mode;
uint32_t cfreq1;
uint32_t cfreq2;
int8_t maxpower;
int8_t minpower;
int8_t maxregpower;
uint8_t antennamax;
uint8_t reg_class_id;
};
/**
* struct vdev_stop_params - vdev stop cmd parameter
* @vdev_id: vdev id
*/
struct vdev_stop_params {
uint8_t vdev_id;
};
/**
* struct vdev_up_params - vdev up cmd parameter
* @vdev_id: vdev id
* @assoc_id: association id
*/
struct vdev_up_params {
uint8_t vdev_id;
uint16_t assoc_id;
};
/**
* struct vdev_down_params - vdev down cmd parameter
* @vdev_id: vdev id
*/
struct vdev_down_params {
uint8_t vdev_id;
};
/**
* struct mac_ssid - mac ssid structure
* @length:
* @mac_ssid[WMI_MAC_MAX_SSID_LENGTH]:
*/
struct mac_ssid {
uint8_t length;
uint8_t mac_ssid[WMI_MAC_MAX_SSID_LENGTH];
} qdf_packed;
/**
* enum wmi_bcn_tx_rate_code - beacon tx rate code
*/
enum wmi_bcn_tx_rate_code {
WMI_BCN_TX_RATE_CODE_1_M = 0x43,
WMI_BCN_TX_RATE_CODE_2_M = 0x42,
WMI_BCN_TX_RATE_CODE_5_5_M = 0x41,
WMI_BCN_TX_RATE_CODE_6_M = 0x03,
WMI_BCN_TX_RATE_CODE_9_M = 0x07,
WMI_BCN_TX_RATE_CODE_11M = 0x40,
WMI_BCN_TX_RATE_CODE_12_M = 0x02,
WMI_BCN_TX_RATE_CODE_18_M = 0x06,
WMI_BCN_TX_RATE_CODE_24_M = 0x01,
WMI_BCN_TX_RATE_CODE_36_M = 0x05,
WMI_BCN_TX_RATE_CODE_48_M = 0x00,
WMI_BCN_TX_RATE_CODE_54_M = 0x04,
};
/**
* struct vdev_start_params - vdev start cmd parameter
* @vdev_id: vdev id
* @chan_freq: channel frequency
* @chan_mode: channel mode
* @band_center_freq1: center freq 1
* @band_center_freq2: center freq 2
* @flags: flags to set like pmf_enabled etc.
* @is_dfs: flag to check if dfs enabled
* @beacon_intval: beacon interval
* @dtim_period: dtim period
* @max_txpow: max tx power
* @is_restart: flag to check if it is vdev
* @ssid: ssid and ssid length info
* @preferred_tx_streams: preferred tx streams
* @preferred_rx_streams: preferred rx streams
* @intr_update: flag to check if need to update
* required wma interface params
* @intr_ssid: pointer to wma interface ssid
* @intr_flags: poiter to wma interface flags
* @requestor_id: to update requestor id
* @disable_hw_ack: to update disable hw ack flag
* @info: to update channel info
* @reg_info_1: to update min power, max power,
* reg power and reg class id
* @reg_info_2: to update antennamax
* @oper_mode: Operating mode
* @dfs_pri_multiplier: DFS primary multiplier
* allow pulse if they are within multiple of PRI for the radar type
* @dot11_mode: Phy mode (VHT20/VHT80...)
* @disable_hw_ack: Disable hw ack if chan is dfs channel for cac
* @channel_param: Channel params required by target.
* @bcn_tx_rate_code: Beacon tx rate code.
*/
struct vdev_start_params {
uint8_t vdev_id;
uint32_t chan_freq;
uint32_t chan_mode;
uint32_t band_center_freq1;
uint32_t band_center_freq2;
uint32_t flags;
bool is_dfs;
uint32_t beacon_intval;
uint32_t dtim_period;
int32_t max_txpow;
bool is_restart;
bool is_half_rate;
bool is_quarter_rate;
uint32_t dis_hw_ack;
uint32_t flag_dfs;
uint8_t hidden_ssid;
uint8_t pmf_enabled;
struct mac_ssid ssid;
uint32_t num_noa_descriptors;
uint32_t preferred_rx_streams;
uint32_t preferred_tx_streams;
#ifdef WMI_NON_TLV_SUPPORT
uint8_t oper_mode;
int32_t dfs_pri_multiplier;
uint8_t dot11_mode;
uint8_t disable_hw_ack;
struct channel_param channel;
#endif
enum wmi_bcn_tx_rate_code bcn_tx_rate_code;
bool ldpc_rx_enabled;
};
/**
* struct hidden_ssid_vdev_restart_params -
* vdev restart cmd parameter
* @session_id: session id
* @ssid_len: ssid length
* @ssid: ssid
* @flags: flags
* @requestor_id: requestor id
* @disable_hw_ack: flag to disable hw ack feature
* @mhz: channel frequency
* @band_center_freq1: center freq 1
* @band_center_freq2: center freq 2
* @info: channel info
* @reg_info_1: contains min power, max power,
* reg power and reg class id
* @reg_info_2: contains antennamax
* @hidden_ssid_restart_in_progress:
* flag to check if restart is in progress
*/
struct hidden_ssid_vdev_restart_params {
uint8_t session_id;
uint32_t ssid_len;
uint32_t ssid[8];
uint32_t flags;
uint32_t requestor_id;
uint32_t disable_hw_ack;
uint32_t mhz;
uint32_t band_center_freq1;
uint32_t band_center_freq2;
uint32_t info;
uint32_t reg_info_1;
uint32_t reg_info_2;
qdf_atomic_t hidden_ssid_restart_in_progress;
};
/**
* struct vdev_set_params - vdev set cmd parameter
* @if_id: vdev id
* @param_id: parameter id
* @param_value: parameter value
*/
struct vdev_set_params {
uint32_t if_id;
uint32_t param_id;
uint32_t param_value;
};
/**
* struct vdev_install_key_params - vdev key set cmd parameter
* @wk_keylen: key length
* @wk_flags: key flags
* @ic_cipher: cipher
* @if_id: vdev id
* @is_group_key: Group key
* @wk_keyix: key index
* @def_keyid: default key index
* @wk_keytsc: Key TSC
* @wk_keyrsc: key RSC
* @key_data: pounter to key data
* @force_none: force
* @is_host_based_crypt: Host based encrypt
* @is_xmit_or_recv_key: xmit or recieve key
* @wk_recviv: WAPI recv IV
* @wk_txiv: WAPI TX IV
*/
struct vdev_install_key_params {
uint8_t wk_keylen;
uint16_t wk_flags;
uint8_t ic_cipher;
uint8_t if_id;
bool is_group_key;
uint16_t wk_keyix;
uint8_t def_keyid;
uint64_t wk_keytsc;
uint64_t *wk_keyrsc;
uint8_t *key_data;
uint8_t force_none;
bool is_host_based_crypt;
bool is_xmit_or_recv_key;
#if ATH_SUPPORT_WAPI
uint8_t *wk_recviv;
uint32_t *wk_txiv;
#endif
};
/**
* struct peer_delete_params - peer delete cmd parameter
* @vdev_id: vdev id
*/
struct peer_delete_params {
uint8_t vdev_id;
};
/**
* struct peer_flush_params - peer flush cmd parameter
* @peer_tid_bitmap: peer tid bitmap
* @vdev_id: vdev id
*/
struct peer_flush_params {
uint32_t peer_tid_bitmap;
uint8_t vdev_id;
};
/**
* struct peer_set_params - peer set cmd parameter
* @param_id: parameter id
* @param_value: parameter value
* @vdev_id: vdev id
*/
struct peer_set_params {
uint32_t param_id;
uint32_t param_value;
uint32_t vdev_id;
};
/**
* struct peer_create_params - peer create cmd parameter
* @peer_addr: peer mac addr
* @peer_type: peer type
* @vdev_id: vdev id
*/
struct peer_create_params {
const uint8_t *peer_addr;
uint32_t peer_type;
uint32_t vdev_id;
};
/**
* struct peer_remove_params - peer remove cmd parameter
* @bssid: bss id
* @vdev_id: vdev id
* @roam_synch_in_progress: flag to indicate if roaming is in progress
*/
struct peer_remove_params {
uint8_t *bssid;
uint8_t vdev_id;
bool roam_synch_in_progress;
};
/**
* Stats ID enums defined in host
*/
typedef enum {
WMI_HOST_REQUEST_PEER_STAT = 0x01,
WMI_HOST_REQUEST_AP_STAT = 0x02,
WMI_HOST_REQUEST_PDEV_STAT = 0x04,
WMI_HOST_REQUEST_VDEV_STAT = 0x08,
WMI_HOST_REQUEST_BCNFLT_STAT = 0x10,
WMI_HOST_REQUEST_VDEV_RATE_STAT = 0x20,
WMI_HOST_REQUEST_INST_STAT = 0x40,
WMI_HOST_REQUEST_PEER_EXTD_STAT = 0x80,
WMI_HOST_REQUEST_VDEV_EXTD_STAT = 0x100,
} wmi_host_stats_id;
typedef struct {
uint16_t cfg_retry_count;
uint16_t retry_count;
} wmi_host_inst_rssi_args;
/**
* struct stats_request_params - stats_request cmd parameter
* @stats_id: statistics id
* @vdev_id: vdev id
* @wmi_host_inst_rssi_args: Instantaneous rssi stats args
*/
struct stats_request_params {
uint32_t stats_id;
uint32_t vdev_id;
#ifdef WMI_NON_TLV_SUPPORT
wmi_host_inst_rssi_args rssi_args;
#endif
};
/**
* struct bss_chan_info_request_params - BSS chan info params
* @param: parameter value
*/
struct bss_chan_info_request_params {
uint32_t param;
};
/**
* struct green_ap_ps_params - green ap ps cmd parameter
* @value: parameter value
*/
struct green_ap_ps_params {
uint32_t value;
};
/**
* struct wow_cmd_params - wow cmd parameter
* @enable: wow enable or disable flag
* @can_suspend_link: flag to indicate if link can be suspended
* @pause_iface_config: interface config
*/
struct wow_cmd_params {
bool enable;
bool can_suspend_link;
uint8_t pause_iface_config;
uint32_t flags;
};
/**
* struct wow_add_wakeup_params - wow wakeup parameter
* @type: param type
*/
struct wow_add_wakeup_params {
uint32_t type;
};
/**
* struct wow_add_wakeup_pattern_params - Add WoW pattern params
* @pattern_bytes: pointer to pattern bytes
* @mask_bytes: pointer to mask bytes
* @pattern_len: pattern length
* @pattern_id: pattern id
*/
struct wow_add_wakeup_pattern_params {
uint8_t *pattern_bytes;
uint8_t *mask_bytes;
uint32_t pattern_len;
uint32_t pattern_id;
};
/**
* struct wow_remove_wakeup_pattern params - WoW remove pattern param
* @pattern_bytes: pointer to pattern bytes
* @mask_bytes: Mask bytes
* @pattern_id: pattern identifier
*/
struct wow_remove_wakeup_pattern_params {
uint32_t *pattern_bytes;
uint32_t *mask_bytes;
uint32_t pattern_id;
};
/**
* struct packet_enable_params - packet enable cmd parameter
* @vdev_id: vdev id
* @enable: flag to indicate if parameter can be enabled or disabled
*/
struct packet_enable_params {
uint8_t vdev_id;
bool enable;
};
/**
* struct suspend_params - suspend cmd parameter
* @disable_target_intr: disable target interrupt
*/
struct suspend_params {
uint8_t disable_target_intr;
};
/**
* struct pdev_params - pdev set cmd parameter
* @param_id: parameter id
* @param_value: parameter value
*/
struct pdev_params {
uint32_t param_id;
uint32_t param_value;
};
/**
* struct beacon_tmpl_params - beacon template cmd parameter
* @vdev_id: vdev id
* @tim_ie_offset: tim ie offset
* @tmpl_len: beacon template length
* @tmpl_len_aligned: beacon template alignment
* @frm: beacon template parameter
*/
struct beacon_tmpl_params {
uint8_t vdev_id;
uint32_t tim_ie_offset;
uint32_t tmpl_len;
uint32_t tmpl_len_aligned;
uint8_t *frm;
};
#ifdef CONFIG_MCL
/**
* struct beacon_params - beacon cmd parameter
* @vdev_id: vdev id
* @tim_ie_offset: tim ie offset
* @csa_count_offset: Offset of Switch count field in CSA IE
* @ecsa_count_offset: Offset of Switch count field in ECSA IE
* @tmpl_len: beacon template length
* @tmpl_len_aligned: beacon template alignment
* @frm: beacon template parameter
*/
struct beacon_params {
uint8_t vdev_id;
uint32_t tim_ie_offset;
uint32_t csa_count_offset;
uint32_t ecsa_count_offset;
uint32_t tmpl_len;
uint32_t tmpl_len_aligned;
uint8_t *frm;
};
#else
/**
* struct beacon_params - beacon cmd parameter
* @vdev_id: vdev id
* @beaconInterval: Beacon interval
* @wbuf: beacon buffer
* @frame_ctrl: frame control field
* @bcn_txant: beacon antenna
* @is_dtim_count_zero: is it dtim beacon
* @is_bitctl_reqd: is Bit control required
* @is_high_latency: Is this high latency target
*/
struct beacon_params {
uint8_t vdev_id;
uint16_t beaconInterval;
qdf_nbuf_t wbuf;
uint16_t frame_ctrl;
uint32_t bcn_txant;
bool is_dtim_count_zero;
bool is_bitctl_reqd;
bool is_high_latency;
};
#endif
/**
* struct bcn_prb_template_params - beacon probe template parameter
* @vdev_id: vdev id
* @buf_len: Template length
* @caps: capabilities field
* @erp: ERP field
*/
struct bcn_prb_template_params {
uint8_t vdev_id;
int buf_len;
uint16_t caps;
uint8_t erp;
};
#define WMI_MAX_SUPPORTED_RATES 128
/**
* struct target_rate_set - Rate set bitmap
* @num_rate: number of rates in rates bitmap
* @rates: rates (each 8bit value) packed into a 32 bit word.
* the rates are filled from least significant byte to most
* significant byte.
*/
typedef struct {
uint32_t num_rates;
uint32_t rates[(WMI_MAX_SUPPORTED_RATES / 4) + 1];
} target_rate_set;
/**
* struct wmi_host_mac_addr - host mac addr 2 word representation of MAC addr
* @mac_addr31to0: upper 4 bytes of MAC address
* @mac_addr47to32: lower 2 bytes of MAC address
*/
typedef struct {
uint32_t mac_addr31to0;
uint32_t mac_addr47to32;
} wmi_host_mac_addr;
/**
* struct peer_assoc_params - peer assoc cmd parameter
* @peer_macaddr: peer mac address
* @vdev_id: vdev id
* @peer_new_assoc: peer association type
* @peer_associd: peer association id
* @peer_flags: peer flags
* @peer_caps: peer capabalities
* @peer_listen_intval: peer listen interval
* @peer_ht_caps: HT capabalities
* @peer_max_mpdu: 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k
* @peer_mpdu_density: 3 : 0~7 : 2^(11nAMPDUdensity -4)
* @peer_rate_caps: peer rate capabalities
* @peer_nss: peer nss
* @peer_phymode: peer phymode
* @peer_ht_info: peer HT info
* @peer_legacy_rates: peer legacy rates
* @peer_ht_rates: peer ht rates
* @rx_max_rate: max rx rates
* @rx_mcs_set: rx mcs
* @tx_max_rate: max tx rates
* @tx_mcs_set: tx mcs
* @vht_capable: VHT capabalities
* @tx_max_mcs_nss: max tx MCS and NSS
* @peer_bw_rxnss_override: Peer BW RX NSS overriden or not.
* @is_pmf_enabled: PMF enabled
* @is_wme_set: WME enabled
* @qos_flag: QoS Flags
* @apsd_flag: APSD flags
* @ht_flag: HT flags
* @bw_40: 40 capabale
* @bw_80: 80 capabale
* @bw_160: 160 capabale
* @stbc_flag: STBC flag
* @ldpc_flag: LDPC flag
* @static_mimops_flag: statis MIMO PS flags
* @dynamic_mimops_flag: Dynamic MIMO PS flags
* @spatial_mux_flag: spatial MUX flags
* @vht_flag: VHT flags
* @vht_ng_flag: VHT on 11N/G flags
* @need_ptk_4_way: Needs 4 way handshake
* @need_gtk_2_way: Needs 2 way GTK
* @auth_flag: Is peer authenticated
* @safe_mode_enabled: Safe enabled for this peer
* @amsdu_disable: AMSDU disble
* @peer_mac: Peer mac address
*/
struct peer_assoc_params {
wmi_host_mac_addr peer_macaddr;
uint32_t vdev_id;
uint32_t peer_new_assoc;
uint32_t peer_associd;
uint32_t peer_flags;
uint32_t peer_caps;
uint32_t peer_listen_intval;
uint32_t peer_ht_caps;
uint32_t peer_max_mpdu;
uint32_t peer_mpdu_density;
uint32_t peer_rate_caps;
uint32_t peer_nss;
uint32_t peer_vht_caps;
uint32_t peer_phymode;
uint32_t peer_ht_info[2];
target_rate_set peer_legacy_rates;
target_rate_set peer_ht_rates;
uint32_t rx_max_rate;
uint32_t rx_mcs_set;
uint32_t tx_max_rate;
uint32_t tx_mcs_set;
uint8_t vht_capable;
#ifdef WMI_NON_TLV_SUPPORT
uint32_t tx_max_mcs_nss;
uint32_t peer_bw_rxnss_override;
bool is_pmf_enabled;
bool is_wme_set;
bool qos_flag;
bool apsd_flag;
bool ht_flag;
bool bw_40;
bool bw_80;
bool bw_160;
bool stbc_flag;
bool ldpc_flag;
bool static_mimops_flag;
bool dynamic_mimops_flag;
bool spatial_mux_flag;
bool vht_flag;
bool vht_ng_flag;
bool need_ptk_4_way;
bool need_gtk_2_way;
bool auth_flag;
bool safe_mode_enabled;
bool amsdu_disable;
/* Use common structure */
uint8_t peer_mac[IEEE80211_ADDR_LEN];
#endif
};
/**
* struct sta_ps_params - sta ps cmd parameter
* @vdev_id: vdev id
* @param: sta ps paramter
* @value: sta ps parameter value
*/
struct sta_ps_params {
uint32_t vdev_id;
uint32_t param;
uint32_t value;
};
/**
* struct ap_ps_params - ap ps cmd parameter
* @vdev_id: vdev id
* @param: ap ps paramter
* @value: ap ps paramter value
*/
struct ap_ps_params {
uint32_t vdev_id;
uint32_t param;
uint32_t value;
};
#define WMI_HOST_SCAN_CHAN_FREQ_SHIFT 0
#define WMI_HOST_SCAN_CHAN_FREQ_MASK 0xffff
#define WMI_HOST_SCAN_CHAN_MODE_SHIFT 16
#define WMI_HOST_SCAN_CHAN_MODE_MASK 0xff
/**
* struct scan_start_params - start scan cmd parameter
* @scan_id: scan id
* @scan_req_id: requeted scan id
* @vdev_id: vdev id
* @scan_priority: scan priority
* @notify_scan_events: flag to indicate if scan to be notified
* @dwell_time_active: active dwell time
* @dwell_time_passive: passive dwell time
* @min_rest_time: min rest time
* @max_rest_time: max rest time
* @repeat_probe_time: repeat probe time
* @probe_spacing_time: probe spacing time
* @idle_time: idle time
* @max_scan_time: max scan time
* @probe_delay: probe delay
* @scan_ctrl_flags: scan control flag
* @burst_duration: burst duration
* @num_chan: no of channel
* @num_bssid: no of bssid
* @num_ssids: no of ssid
* @ie_len: ie length
* @n_probes: no of probe
* @chan_list: channel list
* @ie_len_with_pad: ie length with padding
* @num_ssid: no of ssid
* @sid: pointer to mac_ssid structure
* @uie_fieldOffset: ie field offset
* @mac_add_bytes: mac address bytes
* @is_strict_pscan_en: Is this a strict passive scan
* @is_promiscous_mode: Is promiscous mode
* @is_phy_error: is Phy error
* @add_cck_rates: Add cck rates
* @chan_stat_enable: channel stats enabled
* @offchan_tx_mgmt: Offchan tx scan
* @offchan_tx_data: offchan tx data
* @add_bcast_probe_reqd: Add bcast probe request
* @bssid_list: Lisst of bssid to scan
* @ie_data: IE data buffer pointer
* @passive_flag: Is this passive scan
* @enable_scan_randomization: enable scan randomization feature
* @mac_addr: MAC address used with randomization
* @mac_addr_mask: MAC address mask used with randomization, bits that
* are 0 in the mask should be randomized, bits that are 1 should
* be taken from the @mac_addr
* @ie_whitelist: set to true for enabling ie whitelisting
* @probe_req_ie_bitmap: contains IEs to be included in probe req
* @num_vendor_oui: number of vendor OUIs
* @oui_field_len: size of total number of OUIs
* @voui: pointer to OUI buffer
*/
struct scan_start_params {
uint32_t scan_id;
uint32_t scan_req_id;
uint32_t vdev_id;
uint32_t scan_priority;
uint32_t notify_scan_events;
uint32_t dwell_time_active;
uint32_t dwell_time_passive;
uint32_t min_rest_time;
uint32_t max_rest_time;
uint32_t repeat_probe_time;
uint32_t probe_spacing_time;
uint32_t idle_time;
uint32_t max_scan_time;
uint32_t probe_delay;
uint32_t scan_ctrl_flags;
uint32_t burst_duration;
uint32_t num_chan;
uint32_t num_bssid;
uint32_t num_ssids;
uint32_t ie_len;
uint32_t n_probes;
uint32_t *chan_list;
uint32_t ie_len_with_pad;
struct mac_ssid ssid[WMI_SCAN_MAX_NUM_SSID];
uint8_t *ie_base;
uint16_t uie_fieldOffset;
uint8_t mac_add_bytes[IEEE80211_ADDR_LEN];
#ifdef WMI_NON_TLV_SUPPORT
bool is_strict_pscan_en;
bool is_promiscous_mode;
bool is_phy_error;
bool add_cck_rates;
bool chan_stat_enable;
bool offchan_tx_mgmt;
bool offchan_tx_data;
bool add_bcast_probe_reqd;
uint8_t bssid_list[WMI_SCAN_MAX_NUM_BSSID][IEEE80211_ADDR_LEN];
uint8_t *ie_data;
int passive_flag;
#endif
/* mac address randomization attributes */
bool enable_scan_randomization;
uint8_t mac_addr[QDF_MAC_ADDR_SIZE];
uint8_t mac_addr_mask[QDF_MAC_ADDR_SIZE];
/* probe req ie whitelisting attrs */
bool ie_whitelist;
uint32_t probe_req_ie_bitmap[PROBE_REQ_BITMAP_LEN];
uint32_t num_vendor_oui;
uint32_t oui_field_len;
uint8_t *voui;
uint32_t scan_ctrl_flags_ext;
};
/**
* struct scan_stop_params - stop scan cmd parameter
* @requestor: scan requestor
* @scan_id: scan id
* @req_type: scan request type
* @vdev_id: vdev id
* @all_scans: Stop all scans
* @vap_scans: stop vap scans
* @specific_scan: specific scan
* @flags: scan flags
* @ss_scan_id: ss scan id
*/
struct scan_stop_params {
uint32_t requestor;
uint32_t scan_id;
uint32_t req_type;
uint32_t vdev_id;
#ifdef WMI_NON_TLV_SUPPORT
bool all_scans;
bool vap_scans;
bool specific_scan;
uint32_t flags;
uint32_t ss_scan_id;
#endif
};
/**
* struct scan_chan_list_params - scan channel list cmd parameter
* @num_scan_chans: no of scan channels
* @chan_info: pointer to wmi channel info
*/
#ifdef CONFIG_MCL
/* TODO: This needs clean-up based on how its processed. */
typedef struct {
/* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_channel */
uint32_t tlv_header;
/** primary 20 MHz channel frequency in mhz */
uint32_t mhz;
/** Center frequency 1 in MHz*/
uint32_t band_center_freq1;
/** Center frequency 2 in MHz - valid only for 11acvht 80plus80 mode*/
uint32_t band_center_freq2;
/** channel info described below */
uint32_t info;
/** contains min power, max power, reg power and reg class id. */
uint32_t reg_info_1;
/** contains antennamax */
uint32_t reg_info_2;
} wmi_channel_param;
struct scan_chan_list_params {
uint8_t num_scan_chans;
wmi_channel_param *chan_info;
};
#else
/**
* struct scan_chan_list_params - scan channel list cmd parameter
* @num_chan: no of scan channels
* @nallchans: nall chans
* @ch_param: pointer to channel_paramw
*/
struct scan_chan_list_params {
uint8_t num_chan;
uint16_t nallchans;
struct channel_param ch_param[1];
};
#endif
/**
* struct fw_hang_params - fw hang command parameters
* @type: 0:unused 1: ASSERT, 2:not respond detect command, 3:simulate ep-full
* @delay_time_ms: 0xffffffff means the simulate will delay for random time (0 ~0xffffffff ms)
*/
struct fw_hang_params {
uint32_t type;
uint32_t delay_time_ms;
};
/**
* struct pdev_utf_params - pdev utf command parameters
* @utf_payload:
* @len:
* @is_ar900b: is it 900b target
*/
struct pdev_utf_params {
uint8_t *utf_payload;
uint32_t len;
#ifdef WMI_NON_TLV_SUPPORT
bool is_ar900b;
#endif
};
/*Adding this due to dependency on wmi_unified.h
*/
typedef struct {
uint32_t len;
uint32_t msgref;
uint32_t segmentInfo;
} QVIT_SEG_HDR_INFO_STRUCT;
struct pdev_qvit_params {
uint8_t *utf_payload;
uint32_t len;
};
/**
* struct crash_inject - crash inject command parameters
* @type: crash inject type
* @delay_time_ms: time in milliseconds for FW to delay the crash
*/
struct crash_inject {
uint32_t type;
uint32_t delay_time_ms;
};
/**
* struct dbglog_params - fw deboglog command parameters
* @param: command parameter
* @val: parameter value
* @module_id_bitmap: fixed length module id bitmap
* @bitmap_len: module id bitmap length
* @cfgvalid: cfgvalid
*/
struct dbglog_params {
uint32_t param;
uint32_t val;
uint32_t *module_id_bitmap;
uint32_t bitmap_len;
#ifdef WMI_NON_TLV_SUPPORT
uint32_t cfgvalid[2];
#endif
};
/**
* struct seg_hdr_info - header info
* @len: length
* @msgref: message refrence
* @segmentInfo: segment info
* @pad: padding
*/
struct seg_hdr_info {
uint32_t len;
uint32_t msgref;
uint32_t segmentInfo;
uint32_t pad;
};
/**
* struct tx_send_params - TX parameters
* @pwr: Tx frame transmission power
* @mcs_mask: Modulation and coding index mask for transmission
* bit 0 -> CCK 1 Mbps rate is allowed
* bit 1 -> CCK 2 Mbps rate is allowed
* bit 2 -> CCK 5.5 Mbps rate is allowed
* bit 3 -> CCK 11 Mbps rate is allowed
* bit 4 -> OFDM BPSK modulation, 1/2 coding rate is allowed
* bit 5 -> OFDM BPSK modulation, 3/4 coding rate is allowed
* bit 6 -> OFDM QPSK modulation, 1/2 coding rate is allowed
* bit 7 -> OFDM QPSK modulation, 3/4 coding rate is allowed
* bit 8 -> OFDM 16-QAM modulation, 1/2 coding rate is allowed
* bit 9 -> OFDM 16-QAM modulation, 3/4 coding rate is allowed
* bit 10 -> OFDM 64-QAM modulation, 2/3 coding rate is allowed
* bit 11 -> OFDM 64-QAM modulation, 3/4 coding rate is allowed
* @nss_mask: Spatial streams permitted
* bit 0: if set, Nss = 1 (non-MIMO) is permitted
* bit 1: if set, Nss = 2 (2x2 MIMO) is permitted
* bit 2: if set, Nss = 3 (3x3 MIMO) is permitted
* bit 3: if set, Nss = 4 (4x4 MIMO) is permitted
* bit 4: if set, Nss = 5 (5x5 MIMO) is permitted
* bit 5: if set, Nss = 6 (6x6 MIMO) is permitted
* bit 6: if set, Nss = 7 (7x7 MIMO) is permitted
* bit 7: if set, Nss = 8 (8x8 MIMO) is permitted
* If no bits are set, target will choose what NSS type to use
* @retry_limit: Maximum number of retries before ACK
* @chain_mask: Chains to be used for transmission
* @bw_mask: Bandwidth to be used for transmission
* bit 0 -> 5MHz
* bit 1 -> 10MHz
* bit 2 -> 20MHz
* bit 3 -> 40MHz
* bit 4 -> 80MHz
* bit 5 -> 160MHz
* bit 6 -> 80_80MHz
* @preamble_type: Preamble types for transmission
* bit 0: if set, OFDM
* bit 1: if set, CCK
* bit 2: if set, HT
* bit 3: if set, VHT
* bit 4: if set, HE
* @frame_type: Data or Management frame
* Data:1 Mgmt:0
*/
struct tx_send_params {
uint32_t pwr:8,
mcs_mask:12,
nss_mask:8,
retry_limit:4;
uint32_t chain_mask:8,
bw_mask:7,
preamble_type:5,
frame_type:1,
reserved:11;
};
/**
* struct wmi_mgmt_params - wmi mgmt cmd paramters
* @tx_frame: management tx frame
* @frm_len: frame length
* @vdev_id: vdev id
* @tx_complete_cb: tx download callback handler
* @tx_ota_post_proc_cb: OTA complition handler
* @chanfreq: channel frequency
* @pdata: frame data
* @wmi_desc: command descriptor
* @desc_id: descriptor id relyaed back by target
* @macaddr - macaddr of peer
* @qdf_ctx: qdf context for qdf_nbuf_map
* @tx_param: TX send parameters
* @tx_params_valid: Flag that indicates if TX params are valid
*/
struct wmi_mgmt_params {
void *tx_frame;
uint16_t frm_len;
uint8_t vdev_id;
uint16_t chanfreq;
void *pdata;
uint16_t desc_id;
uint8_t *macaddr;
void *qdf_ctx;
struct tx_send_params tx_param;
bool tx_params_valid;
};
/**
* struct p2p_ps_params - P2P powersave related params
* @opp_ps: opportunistic power save
* @ctwindow: CT window
* @count: count
* @duration: duration
* @interval: interval
* @single_noa_duration: single shot noa duration
* @ps_selection: power save selection
* @session_id: session id
*/
struct p2p_ps_params {
uint8_t opp_ps;
uint32_t ctwindow;
uint8_t count;
uint32_t duration;
uint32_t interval;
uint32_t single_noa_duration;
uint8_t ps_selection;
uint8_t session_id;
};
/**
* struct ta_uapsd_trig_params - uapsd trigger parameter
* @vdevid: vdev id
* @peer_addr: peer address
* @auto_triggerparam: trigger parameters
* @num_ac: no of access category
*/
struct sta_uapsd_trig_params {
uint32_t vdevid;
uint8_t peer_addr[IEEE80211_ADDR_LEN];
uint8_t *auto_triggerparam;
uint32_t num_ac;
};
/**
* struct ocb_utc_param
* @vdev_id: session id
* @utc_time: number of nanoseconds from Jan 1st 1958
* @time_error: the error in the UTC time. All 1's for unknown
*/
struct ocb_utc_param {
uint32_t vdev_id;
uint8_t utc_time[WMI_SIZE_UTC_TIME];
uint8_t time_error[WMI_SIZE_UTC_TIME_ERROR];
};
/**
* struct ocb_timing_advert_param
* @vdev_id: session id
* @chan_freq: frequency on which to advertise
* @repeat_rate: the number of times it will send TA in 5 seconds
* @timestamp_offset: offset of the timestamp field in the TA frame
* @time_value_offset: offset of the time_value field in the TA frame
* @template_length: size in bytes of the TA frame
* @template_value: the TA frame
*/
struct ocb_timing_advert_param {
uint32_t vdev_id;
uint32_t chan_freq;
uint32_t repeat_rate;
uint32_t timestamp_offset;
uint32_t time_value_offset;
uint32_t template_length;
uint8_t *template_value;
};
/**
* struct dcc_get_stats_param
* @vdev_id: session id
* @channel_count: number of dcc channels
* @request_array_len: size in bytes of the request array
* @request_array: the request array
*/
struct dcc_get_stats_param {
uint32_t vdev_id;
uint32_t channel_count;
uint32_t request_array_len;
void *request_array;
};
/**
* struct dcc_update_ndl_param
* @vdev_id: session id
* @channel_count: number of channels to be updated
* @dcc_ndl_chan_list_len: size in bytes of the ndl_chan array
* @dcc_ndl_chan_list: the ndl_chan array
* @dcc_ndl_active_state_list_len: size in bytes of the active_state array
* @dcc_ndl_active_state_list: the active state array
*/
struct dcc_update_ndl_param {
uint32_t vdev_id;
uint32_t channel_count;
uint32_t dcc_ndl_chan_list_len;
void *dcc_ndl_chan_list;
uint32_t dcc_ndl_active_state_list_len;
void *dcc_ndl_active_state_list;
};
/**
* struct ocb_config_sched
* @chan_freq: frequency of the channel
* @total_duration: duration of the schedule
* @guard_interval: guard interval on the start of the schedule
*/
struct ocb_config_sched {
uint32_t chan_freq;
uint32_t total_duration;
uint32_t guard_interval;
};
/**
* OCB structures
*/
#define WMI_NUM_AC (4)
#define WMI_OCB_CHANNEL_MAX (5)
#define WMI_MAX_NUM_AC 4
struct wmi_ocb_qos_params {
uint8_t aifsn;
uint8_t cwmin;
uint8_t cwmax;
};
/**
* struct ocb_config_channel
* @chan_freq: frequency of the channel
* @bandwidth: bandwidth of the channel, either 10 or 20 MHz
* @mac_address: MAC address assigned to this channel
* @qos_params: QoS parameters
* @max_pwr: maximum transmit power of the channel (dBm)
* @min_pwr: minimum transmit power of the channel (dBm)
* @reg_pwr: maximum transmit power specified by the regulatory domain (dBm)
* @antenna_max: maximum antenna gain specified by the regulatory domain (dB)
*/
struct ocb_config_channel {
uint32_t chan_freq;
uint32_t bandwidth;
struct qdf_mac_addr mac_address;
struct wmi_ocb_qos_params qos_params[WMI_MAX_NUM_AC];
uint32_t max_pwr;
uint32_t min_pwr;
uint8_t reg_pwr;
uint8_t antenna_max;
uint16_t flags;
};
/**
* struct ocb_config_param
* @session_id: session id
* @channel_count: number of channels
* @schedule_size: size of the channel schedule
* @flags: reserved
* @channels: array of OCB channels
* @schedule: array of OCB schedule elements
* @dcc_ndl_chan_list_len: size of the ndl_chan array
* @dcc_ndl_chan_list: array of dcc channel info
* @dcc_ndl_active_state_list_len: size of the active state array
* @dcc_ndl_active_state_list: array of active states
* @adapter: the OCB adapter
* @dcc_stats_callback: callback for the response event
*/
struct ocb_config_param {
uint8_t session_id;
uint32_t channel_count;
uint32_t schedule_size;
uint32_t flags;
struct ocb_config_channel *channels;
struct ocb_config_sched *schedule;
uint32_t dcc_ndl_chan_list_len;
void *dcc_ndl_chan_list;
uint32_t dcc_ndl_active_state_list_len;
void *dcc_ndl_active_state_list;
};
enum wmi_peer_rate_report_cond_phy_type {
WMI_PEER_RATE_REPORT_COND_11B = 0,
WMI_PEER_RATE_REPORT_COND_11A_G,
WMI_PEER_RATE_REPORT_COND_11N,
WMI_PEER_RATE_REPORT_COND_11AC,
WMI_PEER_RATE_REPORT_COND_MAX_NUM
};
/**
* struct report_rate_delta - peer specific parameters
* @percent: percentage
* @delta_min: rate min delta
*/
struct report_rate_delta {
uint32_t percent; /* in unit of 12.5% */
uint32_t delta_min; /* in unit of Mbps */
};
/**
* struct report_rate_per_phy - per phy report parameters
* @cond_flags: condition flag val
* @delta: rate delta
* @report_rate_threshold: rate threshold
*/
struct report_rate_per_phy {
/*
* PEER_RATE_REPORT_COND_FLAG_DELTA,
* PEER_RATE_REPORT_COND_FLAG_THRESHOLD
* Any of these two conditions or both of
* them can be set.
*/
uint32_t cond_flags;
struct report_rate_delta delta;
/*
* In unit of Mbps. There are at most 4 thresholds
* If the threshold count is less than 4, set zero to
* the one following the last threshold
*/
uint32_t report_rate_threshold[WMI_MAX_NUM_OF_RATE_THRESH];
};
/**
* struct peer_rate_report_params - peer rate report parameters
* @rate_report_enable: enable rate report param
* @backoff_time: backoff time
* @timer_period: timer
* @report_per_phy: report per phy type
*/
struct wmi_peer_rate_report_params {
uint32_t rate_report_enable;
uint32_t backoff_time; /* in unit of msecond */
uint32_t timer_period; /* in unit of msecond */
/*
*In the following field, the array index means the phy type,
* please see enum wmi_peer_rate_report_cond_phy_type for detail
*/
struct report_rate_per_phy report_per_phy[
WMI_PEER_RATE_REPORT_COND_MAX_NUM];
};
/**
* struct t_thermal_cmd_params - thermal command parameters
* @min_temp: minimum temprature
* @max_temp: maximum temprature
* @thermal_enable: thermal enable
*/
struct thermal_cmd_params {
uint16_t min_temp;
uint16_t max_temp;
uint8_t thermal_enable;
};
#define WMI_LRO_IPV4_SEED_ARR_SZ 5
#define WMI_LRO_IPV6_SEED_ARR_SZ 11
/**
* struct wmi_lro_config_cmd_t - set LRO init parameters
* @lro_enable: indicates whether lro is enabled
* @tcp_flag: If the TCP flags from the packet do not match
* the values in this field after masking with TCP flags mask
* below, packet is not LRO eligible
* @tcp_flag_mask: field for comparing the TCP values provided
* above with the TCP flags field in the received packet
* @toeplitz_hash_ipv4: contains seed needed to compute the flow id
* 5-tuple toeplitz hash for ipv4 packets
* @toeplitz_hash_ipv6: contains seed needed to compute the flow id
* 5-tuple toeplitz hash for ipv6 packets
*/
struct wmi_lro_config_cmd_t {
uint32_t lro_enable;
uint32_t tcp_flag:9,
tcp_flag_mask:9;
uint32_t toeplitz_hash_ipv4[WMI_LRO_IPV4_SEED_ARR_SZ];
uint32_t toeplitz_hash_ipv6[WMI_LRO_IPV6_SEED_ARR_SZ];
};
/**
* struct gtx_config_t - GTX config
* @gtx_rt_mask: for HT and VHT rate masks
* @gtx_usrcfg: host request for GTX mask
* @gtx_threshold: PER Threshold (default: 10%)
* @gtx_margin: PER margin (default: 2%)
* @gtx_tcpstep: TCP step (default: 1)
* @gtx_tpcMin: TCP min (default: 5)
* @gtx_bwmask: BW mask (20/40/80/160 Mhz)
*/
struct wmi_gtx_config {
uint32_t gtx_rt_mask[2];
uint32_t gtx_usrcfg;
uint32_t gtx_threshold;
uint32_t gtx_margin;
uint32_t gtx_tpcstep;
uint32_t gtx_tpcmin;
uint32_t gtx_bwmask;
};
/**
* struct wmi_probe_resp_params - send probe response parameters
* @bssId: BSSID
* @pProbeRespTemplate: probe response template
* @probeRespTemplateLen: probe response template length
* @ucProxyProbeReqValidIEBmap: valid IE bitmap
*/
struct wmi_probe_resp_params {
uint8_t bssId[IEEE80211_ADDR_LEN];
uint8_t *pProbeRespTemplate;
uint32_t probeRespTemplateLen;
uint32_t ucProxyProbeReqValidIEBmap[8];
};
struct key_seq_counter {
uint32_t key_seq_counter_l;
uint32_t key_seq_counter_h;
};
/* struct set_key_params: structure containing
* installation key parameters
* @vdev_id: vdev id
* @key_len: key length
* @key_idx: key index
* @peer_mac: peer mac address
* @key_flags: key flags, 0:pairwise key, 1:group key, 2:static key
* @key_cipher: key cipher based on security mode
* @key_txmic_len: tx mic length
* @key_rxmic_len: rx mic length
* @rx_iv: receive IV, applicable only in case of WAPI
* @tx_iv: transmit IV, applicable only in case of WAPI
* @key_rsc_counter: RSC key counter
* @key_data: key data
*/
struct set_key_params {
uint8_t vdev_id;
uint16_t key_len;
uint32_t key_idx;
uint8_t peer_mac[IEEE80211_ADDR_LEN];
uint32_t key_flags;
uint32_t key_cipher;
uint32_t key_txmic_len;
uint32_t key_rxmic_len;
#ifdef FEATURE_WLAN_WAPI
uint8_t rx_iv[16];
uint8_t tx_iv[16];
#endif
uint8_t key_data[WMI_MAC_MAX_KEY_LENGTH];
struct key_seq_counter key_rsc_counter;
};
/**
* struct sta_params - sta keep alive parameters
* @vdev_id: vdev id
* @method: keep alive method
* @timeperiod: time to keep alive
* @hostv4addr: host ipv4 address
* @destv4addr: destination ipv4 address
* @destmac: destination mac address
*/
struct sta_params {
uint8_t vdev_id;
uint32_t method;
uint32_t timeperiod;
uint8_t *hostv4addr;
uint8_t *destv4addr;
uint8_t *destmac;
};
/**
* struct gateway_update_req_param - gateway parameter update request
* @request_id: request id
* @session_id: session id
* @max_retries: Max ARP/NS retry attempts
* @timeout: Retry interval
* @ipv4_addr_type: on ipv4 network
* @ipv6_addr_type: on ipv6 network
* @gw_mac_addr: gateway mac addr
* @ipv4_addr: ipv4 addr
* @ipv6_addr: ipv6 addr
*/
struct gateway_update_req_param {
uint32_t request_id;
uint32_t session_id;
uint32_t max_retries;
uint32_t timeout;
uint32_t ipv4_addr_type;
uint32_t ipv6_addr_type;
struct qdf_mac_addr gw_mac_addr;
uint8_t ipv4_addr[QDF_IPV4_ADDR_SIZE];
uint8_t ipv6_addr[QDF_IPV6_ADDR_SIZE];
};
/**
* struct rssi_monitor_param - rssi monitoring
* @request_id: request id
* @session_id: session id
* @min_rssi: minimum rssi
* @max_rssi: maximum rssi
* @control: flag to indicate start or stop
*/
struct rssi_monitor_param {
uint32_t request_id;
uint32_t session_id;
int8_t min_rssi;
int8_t max_rssi;
bool control;
};
/**
* struct scan_mac_oui - oui paramters
* @oui: oui parameters
* @vdev_id: session id
* @enb_probe_req_sno_randomization: set to true for enabling
* seq number randomization of probe req frames
* @ie_whitelist: set to true for enabling ie whitelisting
* @probe_req_ie_bitmap: contains IEs to be included in probe req
* @num_vendor_oui: number of vendor OUIs
* @oui_field_len: size of total number of OUIs
* @voui: pointer to OUI buffer
*/
struct scan_mac_oui {
uint8_t oui[WMI_WIFI_SCANNING_MAC_OUI_LENGTH];
uint32_t vdev_id;
bool enb_probe_req_sno_randomization;
/* probe req ie whitelisting attrs */
bool ie_whitelist;
uint32_t probe_req_ie_bitmap[PROBE_REQ_BITMAP_LEN];
uint32_t num_vendor_oui;
uint32_t oui_field_len;
uint8_t *voui;
};
#define WMI_PASSPOINT_REALM_LEN 256
#define WMI_PASSPOINT_ROAMING_CONSORTIUM_ID_NUM 16
#define WMI_PASSPOINT_PLMN_LEN 3
/**
* struct wifi_passpoint_network_param - passpoint network block
* @id: identifier of this network block
* @realm: null terminated UTF8 encoded realm, 0 if unspecified
* @roaming_consortium_ids: roaming consortium ids to match, 0s if unspecified
* @plmn: mcc/mnc combination as per rules, 0s if unspecified
*/
struct wifi_passpoint_network_param {
uint32_t id;
uint8_t realm[WMI_PASSPOINT_REALM_LEN];
int64_t roaming_consortium_ids[WMI_PASSPOINT_ROAMING_CONSORTIUM_ID_NUM];
uint8_t plmn[WMI_PASSPOINT_PLMN_LEN];
};
/**
* struct wifi_passpoint_req_param - passpoint request
* @request_id: request identifier
* @num_networks: number of networks
* @networks: passpoint networks
*/
struct wifi_passpoint_req_param {
uint32_t request_id;
uint32_t session_id;
uint32_t num_networks;
struct wifi_passpoint_network_param networks[];
};
/* struct mobility_domain_info - structure containing
* mobility domain info
* @mdie_present: mobility domain present or not
* @mobility_domain: mobility domain
*/
struct mobility_domain_info {
uint8_t mdie_present;
uint16_t mobility_domain;
};
#define WMI_HOST_ROAM_OFFLOAD_NUM_MCS_SET (16)
/* This TLV will be filled only in case roam offload
* for wpa2-psk/pmkid/ese/11r is enabled */
typedef struct {
/*
* TLV tag and len; tag equals
* WMITLV_TAG_STRUC_wmi_roam_offload_fixed_param
*/
uint32_t tlv_header;
uint32_t rssi_cat_gap; /* gap for every category bucket */
uint32_t prefer_5g; /* prefer select 5G candidate */
uint32_t select_5g_margin;
uint32_t reassoc_failure_timeout; /* reassoc failure timeout */
uint32_t capability;
uint32_t ht_caps_info;
uint32_t ampdu_param;
uint32_t ht_ext_cap;
uint32_t ht_txbf;
uint32_t asel_cap;
uint32_t qos_enabled;
uint32_t qos_caps;
uint32_t wmm_caps;
/* since this is 4 byte aligned, we don't declare it as tlv array */
uint32_t mcsset[WMI_HOST_ROAM_OFFLOAD_NUM_MCS_SET >> 2];
} roam_offload_param;
#define WMI_FILS_MAX_RRK_LENGTH 64
#define WMI_FILS_MAX_RIK_LENGTH WMI_FILS_MAX_RRK_LENGTH
#define WMI_FILS_MAX_REALM_LENGTH 256
#define WMI_FILS_MAX_USERNAME_LENGTH 16
/**
* struct roam_fils_params - Roam FILS params
* @username: username
* @username_length: username length
* @next_erp_seq_num: next ERP sequence number
* @rrk: RRK
* @rrk_length: length of @rrk
* @rik: RIK
* @rik_length: length of @rik
* @realm: realm
* @realm_len: length of @realm
*/
struct roam_fils_params {
uint8_t username[WMI_FILS_MAX_USERNAME_LENGTH];
uint32_t username_length;
uint32_t next_erp_seq_num;
uint8_t rrk[WMI_FILS_MAX_RRK_LENGTH];
uint32_t rrk_length;
uint8_t rik[WMI_FILS_MAX_RIK_LENGTH];
uint32_t rik_length;
uint8_t realm[WMI_FILS_MAX_REALM_LENGTH];
uint32_t realm_len;
};
/* struct roam_offload_scan_params - structure
* containing roaming offload scan parameters
* @is_roam_req_valid: flag to tell whether roam req
* is valid or NULL
* @mode: stores flags for scan
* @vdev_id: vdev id
* @roam_offload_enabled: flag for offload enable
* @psk_pmk: pre shared key/pairwise master key
* @pmk_len: length of PMK
* @prefer_5ghz: prefer select 5G candidate
* @roam_rssi_cat_gap: gap for every category bucket
* @select_5ghz_margin: select 5 Ghz margin
* @krk: KRK
* @btk: BTK
* @reassoc_failure_timeout: reassoc failure timeout
* @rokh_id_length: r0kh id length
* @rokh_id: r0kh id
* @roam_key_mgmt_offload_enabled: roam offload flag
* @auth_mode: authentication mode
* @fw_okc: use OKC in firmware
* @fw_pmksa_cache: use PMKSA cache in firmware
* @is_ese_assoc: flag to determine ese assoc
* @mdid: mobility domain info
* @roam_offload_params: roam offload tlv params
* @assoc_ie_length: Assoc IE length
* @assoc_ie: Assoc IE buffer
* @add_fils_tlv: add FILS TLV boolean
* @roam_fils_params: roam fils params
*/
struct roam_offload_scan_params {
uint8_t is_roam_req_valid;
uint32_t mode;
uint32_t vdev_id;
#ifdef WLAN_FEATURE_ROAM_OFFLOAD
uint8_t roam_offload_enabled;
uint8_t psk_pmk[WMI_ROAM_SCAN_PSK_SIZE];
uint32_t pmk_len;
uint8_t prefer_5ghz;
uint8_t roam_rssi_cat_gap;
uint8_t select_5ghz_margin;
uint8_t krk[WMI_KRK_KEY_LEN];
uint8_t btk[WMI_BTK_KEY_LEN];
uint32_t reassoc_failure_timeout;
uint32_t rokh_id_length;
uint8_t rokh_id[WMI_ROAM_R0KH_ID_MAX_LEN];
uint8_t roam_key_mgmt_offload_enabled;
int auth_mode;
bool fw_okc;
bool fw_pmksa_cache;
#endif
bool is_ese_assoc;
struct mobility_domain_info mdid;
#ifndef WMI_NON_TLV_SUPPORT
/* THis is not available in non tlv target.
* please remove this and replace with a host based
* structure */
roam_offload_param roam_offload_params;
#endif
uint32_t assoc_ie_length;
uint8_t assoc_ie[MAX_ASSOC_IE_LENGTH];
bool add_fils_tlv;
#ifdef WLAN_FEATURE_FILS_SK
struct roam_fils_params roam_fils_params;
#endif
};
/* struct roam_offload_scan_rssi_params - structure containing
* parameters for roam offload scan based on RSSI
* @rssi_thresh: rssi threshold
* @rssi_thresh_diff: difference in rssi threshold
* @hi_rssi_scan_max_count: 5G scan max count
* @hi_rssi_scan_rssi_delta: 5G scan rssi change threshold value
* @hi_rssi_scan_rssi_ub: 5G scan upper bound
* @raise_rssi_thresh_5g: flag to determine penalty and boost thresholds
* @session_id: vdev id
* @penalty_threshold_5g: RSSI threshold below which 5GHz RSSI is penalized
* @boost_threshold_5g: RSSI threshold above which 5GHz RSSI is favored
* @raise_factor_5g: factor by which 5GHz RSSI is boosted
* @drop_factor_5g: factor by which 5GHz RSSI is penalized
* @max_raise_rssi_5g: maximum boost that can be applied to a 5GHz RSSI
* @max_drop_rssi_5g: maximum penalty that can be applied to a 5GHz RSSI
* @good_rssi_threshold: RSSI below which roam is kicked in by background
* scan although rssi is still good
* @roam_earlystop_thres_min: Minimum RSSI threshold value for early stop,
* unit is dB above NF
* @roam_earlystop_thres_max: Maximum RSSI threshold value for early stop,
* unit is dB above NF
* @dense_rssi_thresh_offset: dense roam RSSI threshold difference
* @dense_min_aps_cnt: dense roam minimum APs
* @initial_dense_status: dense status detected by host
* @traffic_threshold: dense roam RSSI threshold
* @bg_scan_bad_rssi_thresh: Bad RSSI threshold to perform bg scan
* @roam_bad_rssi_thresh_offset_2g: Offset from Bad RSSI threshold for 2G to 5G Roam
* @bg_scan_client_bitmap: Bitmap used to identify the client scans to snoop
* @flags: Flags for Background Roaming
* Bit 0 : BG roaming enabled when we connect to 2G AP only and roaming to 5G AP only.
* Bit 1-31: Reserved
*/
struct roam_offload_scan_rssi_params {
int8_t rssi_thresh;
uint8_t rssi_thresh_diff;
uint32_t hi_rssi_scan_max_count;
uint32_t hi_rssi_scan_rssi_delta;
int32_t hi_rssi_scan_rssi_ub;
int raise_rssi_thresh_5g;
uint8_t session_id;
uint32_t penalty_threshold_5g;
uint32_t boost_threshold_5g;
uint8_t raise_factor_5g;
uint8_t drop_factor_5g;
int max_raise_rssi_5g;
int max_drop_rssi_5g;
uint32_t good_rssi_threshold;
uint32_t roam_earlystop_thres_min;
uint32_t roam_earlystop_thres_max;
int dense_rssi_thresh_offset;
int dense_min_aps_cnt;
int initial_dense_status;
int traffic_threshold;
int8_t bg_scan_bad_rssi_thresh;
uint8_t roam_bad_rssi_thresh_offset_2g;
uint32_t bg_scan_client_bitmap;
int32_t rssi_thresh_offset_5g;
uint32_t flags;
};
/**
* struct ap_profile - Structure ap profile to match candidate
* @flags: flags
* @rssi_threshold: the value of the the candidate AP should higher by this
* threshold than the rssi of the currrently associated AP
* @ssid: ssid vlaue to be matched
* @rsn_authmode: security params to be matched
* @rsn_ucastcipherset: unicast cipher set
* @rsn_mcastcipherset: mcast/group cipher set
* @rsn_mcastmgmtcipherset: mcast/group management frames cipher set
* @rssi_abs_thresh: the value of the candidate AP should higher than this
* absolute RSSI threshold. Zero means no absolute minimum
* RSSI is required. units are the offset from the noise
* floor in dB
*/
struct ap_profile {
uint32_t flags;
uint32_t rssi_threshold;
struct mac_ssid ssid;
uint32_t rsn_authmode;
uint32_t rsn_ucastcipherset;
uint32_t rsn_mcastcipherset;
uint32_t rsn_mcastmgmtcipherset;
uint32_t rssi_abs_thresh;
};
/**
* struct rssi_scoring - rssi scoring param to sortlist selected AP
* @best_rssi_threshold: Roamable AP RSSI equal or better than this threshold,
* full rssi score 100. Units in dBm.
* @good_rssi_threshold: Below threshold, scoring linear percentage between
* rssi_good_pnt and 100. Units in dBm.
* @bad_rssi_threshold: Between good and bad rssi threshold, scoring linear
* % between rssi_bad_pcnt and rssi_good_pct in dBm.
* @good_rssi_pcnt: Used to assigned scoring percentage of each slot between
* best to good rssi threshold. Units in percentage.
* @bad_rssi_pcnt: Used to assigned scoring percentage of each slot between good
* to bad rssi threshold. Unites in percentage.
* @good_bucket_size : bucket size of slot in good zone
* @bad_bucket_size : bucket size of slot in bad zone
* @rssi_pref_5g_rssi_thresh: Below rssi threshold, 5G AP have given preference
* of band percentage. Units in dBm.
*/
struct rssi_scoring {
int32_t best_rssi_threshold;
int32_t good_rssi_threshold;
int32_t bad_rssi_threshold;
uint32_t good_rssi_pcnt;
uint32_t bad_rssi_pcnt;
uint32_t good_bucket_size;
uint32_t bad_bucket_size;
int32_t rssi_pref_5g_rssi_thresh;
};
/**
* struct param_slot_scoring - define % score for differents slots for a
* scoring param.
* @num_slot: number of slots in which the param will be divided.
* Max 15. index 0 is used for 'not_present. Num_slot will
* equally divide 100. e.g, if num_slot = 4 slot 0 = 0-25%, slot
* 1 = 26-50% slot 2 = 51-75%, slot 3 = 76-100%
* @score_pcnt3_to_0: Conatins score percentage for slot 0-3
* BITS 0-7 :- the scoring pcnt when not present
* BITS 8-15 :- SLOT_1
* BITS 16-23 :- SLOT_2
* BITS 24-31 :- SLOT_3
* @score_pcnt7_to_4: Conatins score percentage for slot 4-7
* BITS 0-7 :- SLOT_4
* BITS 8-15 :- SLOT_5
* BITS 16-23 :- SLOT_6
* BITS 24-31 :- SLOT_7
* @score_pcnt11_to_8: Conatins score percentage for slot 8-11
* BITS 0-7 :- SLOT_8
* BITS 8-15 :- SLOT_9
* BITS 16-23 :- SLOT_10
* BITS 24-31 :- SLOT_11
* @score_pcnt15_to_12: Conatins score percentage for slot 12-15
* BITS 0-7 :- SLOT_12
* BITS 8-15 :- SLOT_13
* BITS 16-23 :- SLOT_14
* BITS 24-31 :- SLOT_15
*/
struct param_slot_scoring {
uint32_t num_slot;
uint32_t score_pcnt3_to_0;
uint32_t score_pcnt7_to_4;
uint32_t score_pcnt11_to_8;
uint32_t score_pcnt15_to_12;
};
/**
* struct scoring_param - scoring param to sortlist selected AP
* @disable_bitmap: Each bit will be either allow(0)/disallow(1) to
* considered the roam score param.
* @rssi_weightage: RSSI weightage out of total score in %
* @ht_weightage: HT weightage out of total score in %.
* @vht_weightage: VHT weightage out of total score in %.
* @he_weightaget: 11ax weightage out of total score in %.
* @bw_weightage: Bandwidth weightage out of total score in %.
* @band_weightage: Band(2G/5G) weightage out of total score in %.
* @nss_weightage: NSS(1x1 / 2x2)weightage out of total score in %.
* @esp_qbss_weightage: ESP/QBSS weightage out of total score in %.
* @beamforming_weightage: Beamforming weightage out of total score in %.
* @pcl_weightage: PCL weightage out of total score in %.
* @oce_wan_weightage OCE WAN metrics weightage out of total score in %.
* @bw_index_score: channel BW scoring percentage information.
* BITS 0-7 :- It contains scoring percentage of 20MHz BW
* BITS 8-15 :- It contains scoring percentage of 40MHz BW
* BITS 16-23 :- It contains scoring percentage of 80MHz BW
* BITS 24-31 :- It contains scoring percentage of 1600MHz BW
* The value of each index must be 0-100
* @band_index_score: band scording percentage information.
* BITS 0-7 :- It contains scoring percentage of 2G
* BITS 8-15 :- It contains scoring percentage of 5G
* BITS 16-23 :- reserved
* BITS 24-31 :- reserved
* The value of each index must be 0-100
* @nss_index_score: NSS scoring percentage information.
* BITS 0-7 :- It contains scoring percentage of 1x1
* BITS 8-15 :- It contains scoring percentage of 2x2
* BITS 16-23 :- It contains scoring percentage of 3x3
* BITS 24-31 :- It contains scoring percentage of 4x4
* The value of each index must be 0-100
* @rssi_scoring: RSSI scoring information.
* @esp_qbss_scoring: ESP/QBSS scoring percentage information
* @oce_wan_scoring: OCE WAN metrics percentage information
*/
struct scoring_param {
uint32_t disable_bitmap;
int32_t rssi_weightage;
int32_t ht_weightage;
int32_t vht_weightage;
int32_t he_weightage;
int32_t bw_weightage;
int32_t band_weightage;
int32_t nss_weightage;
int32_t esp_qbss_weightage;
int32_t beamforming_weightage;
int32_t pcl_weightage;
int32_t oce_wan_weightage;
uint32_t bw_index_score;
uint32_t band_index_score;
uint32_t nss_index_score;
struct rssi_scoring rssi_scoring;
struct param_slot_scoring esp_qbss_scoring;
struct param_slot_scoring oce_wan_scoring;
};
/**
* struct ap_profile_params - ap profile params
* @vdev_id: vdev id
* @profile: ap profile to match candidate
* @param: scoring params to short candidate
*/
struct ap_profile_params {
uint8_t vdev_id;
struct ap_profile profile;
struct scoring_param param;
};
/**
* struct wifi_epno_network - enhanced pno network block
* @ssid: ssid
* @rssi_threshold: threshold for considering this SSID as found, required
* granularity for this threshold is 4dBm to 8dBm
* @flags: WIFI_PNO_FLAG_XXX
* @auth_bit_field: auth bit field for matching WPA IE
*/
struct wifi_epno_network_params {
struct mac_ssid ssid;
int8_t rssi_threshold;
uint8_t flags;
uint8_t auth_bit_field;
};
/**
* struct wifi_enhanched_pno_params - enhanced pno network params
* @request_id: request id number
* @session_id: session_id number
* @min_5ghz_rssi: minimum 5GHz RSSI for a BSSID to be considered
* @min_24ghz_rssi: minimum 2.4GHz RSSI for a BSSID to be considered
* @initial_score_max: maximum score that a network can have before bonuses
* @current_connection_bonus: only report when there is a network's score this
* much higher than the current connection
* @same_network_bonus: score bonus for all n/w with the same network flag
* @secure_bonus: score bonus for networks that are not open
* @band_5ghz_bonus: 5GHz RSSI score bonus (applied to all 5GHz networks)
* @num_networks: number of ssids
* @networks: EPNO networks
*/
struct wifi_enhanched_pno_params {
uint32_t request_id;
uint32_t session_id;
uint32_t min_5ghz_rssi;
uint32_t min_24ghz_rssi;
uint32_t initial_score_max;
uint32_t current_connection_bonus;
uint32_t same_network_bonus;
uint32_t secure_bonus;
uint32_t band_5ghz_bonus;
uint32_t num_networks;
struct wifi_epno_network_params networks[];
};
enum {
WMI_AP_RX_DATA_OFFLOAD = 0x00,
WMI_STA_RX_DATA_OFFLOAD = 0x01,
};
/**
* enum extscan_configuration_flags - extscan config flags
* @WMI_EXTSCAN_LP_EXTENDED_BATCHING: extended batching
*/
enum wmi_extscan_configuration_flags {
WMI_EXTSCAN_LP_EXTENDED_BATCHING = 0x00000001,
};
/**
* enum extscan_report_events_type - extscan report events type
* @EXTSCAN_REPORT_EVENTS_BUFFER_FULL: report only when scan history is % full
* @EXTSCAN_REPORT_EVENTS_EACH_SCAN: report a scan completion event after scan
* @EXTSCAN_REPORT_EVENTS_FULL_RESULTS: forward scan results
* (beacons/probe responses + IEs)
* in real time to HAL, in addition to completion events.
* Note: To keep backward compatibility,
* fire completion events regardless of REPORT_EVENTS_EACH_SCAN.
* @EXTSCAN_REPORT_EVENTS_NO_BATCH: controls batching,
* 0 => batching, 1 => no batching
*/
enum wmi_extscan_report_events_type {
WMI_EXTSCAN_REPORT_EVENTS_BUFFER_FULL = 0x00,
WMI_EXTSCAN_REPORT_EVENTS_EACH_SCAN = 0x01,
WMI_EXTSCAN_REPORT_EVENTS_FULL_RESULTS = 0x02,
WMI_EXTSCAN_REPORT_EVENTS_NO_BATCH = 0x04,
};
/**
* struct ipa_offload_control_params - ipa offload parameters
* @offload_type: ipa offload type
* @vdev_id: vdev id
* @enable: ipa offload enable/disable
*/
struct ipa_offload_control_params {
uint32_t offload_type;
uint32_t vdev_id;
uint32_t enable;
};
/**
* struct extscan_capabilities_params - ext scan capablities
* @request_id: request_id
* @session_id: session_id
*/
struct extscan_capabilities_params {
uint32_t request_id;
uint8_t session_id;
};
/**
* struct extscan_capabilities_reset_params - ext scan capablities reset parameter
* @request_id: request_id
* @session_id: session_id
*/
struct extscan_capabilities_reset_params {
uint32_t request_id;
uint8_t session_id;
};
/**
* struct extscan_bssid_hotlist_reset_params - ext scan hotlist reset parameter
* @request_id: request_id
* @session_id: session_id
*/
struct extscan_bssid_hotlist_reset_params {
uint32_t request_id;
uint8_t session_id;
};
/**
* struct extscan_stop_req_params - ext scan stop parameter
* @request_id: request_id
* @session_id: session_id
*/
struct extscan_stop_req_params {
uint32_t request_id;
uint8_t session_id;
};
/**
* struct ap_threshold_params - ap threshold parameter
* @bssid: mac address
* @low: low threshold
* @high: high threshold
*/
struct ap_threshold_params {
struct qdf_mac_addr bssid;
int32_t low;
int32_t high;
};
/**
* struct extscan_set_sig_changereq_params - ext scan channel parameter
* @request_id: mac address
* @session_id: low threshold
* @rssi_sample_size: Number of samples for averaging RSSI
* @lostap_sample_size: Number of missed samples to confirm AP loss
* @min_breaching: Number of APs breaching threshold required for firmware
* @num_ap: no of scanned ap
* @ap: ap threshold parameter
*/
struct extscan_set_sig_changereq_params {
uint32_t request_id;
uint8_t session_id;
uint32_t rssi_sample_size;
uint32_t lostap_sample_size;
uint32_t min_breaching;
uint32_t num_ap;
struct ap_threshold_params ap[WMI_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS];
};
/**
* struct extscan_cached_result_params - ext scan cached parameter
* @request_id: mac address
* @session_id: low threshold
* @flush: cached results flush
*/
struct extscan_cached_result_params {
uint32_t request_id;
uint8_t session_id;
bool flush;
};
/* Set PNO */
#define WMI_PNO_MAX_NETW_CHANNELS 26
#define WMI_PNO_MAX_NETW_CHANNELS_EX 60
#define WMI_PNO_MAX_SUPP_NETWORKS 16
/*
* size based of dot11 declaration without extra IEs as we will not carry those
* for PNO
*/
#define WMI_PNO_MAX_PB_REQ_SIZE 450
#define WMI_PNO_24G_DEFAULT_CH 1
#define WMI_PNO_5G_DEFAULT_CH 36
/**
* enum pno_mode - pno mode types
* @WMI_PNO_MODE_IMMEDIATE: immidiate mode
* @WMI_PNO_MODE_ON_SUSPEND: suspend on mode
* @WMI_PNO_MODE_ON_RESUME: resume on mode
* @WMI_PNO_MODE_MAX: max range
*/
enum pno_mode {
WMI_PNO_MODE_IMMEDIATE,
WMI_PNO_MODE_ON_SUSPEND,
WMI_PNO_MODE_ON_RESUME,
WMI_PNO_MODE_MAX
};
/**
* struct pno_nw_type - pno nw type
* @ssid: mac ssid
* @authentication: authentication type
* @encryption: encryption type
* @bcastNetwType: broadcast nw type
* @ucChannelCount: uc channel count
* @aChannels: pno channel
* @rssiThreshold: rssi threshold
*/
struct pno_nw_type {
struct mac_ssid ssid;
uint32_t authentication;
uint32_t encryption;
uint32_t bcastNetwType;
uint8_t ucChannelCount;
uint8_t aChannels[WMI_PNO_MAX_NETW_CHANNELS_EX];
int32_t rssiThreshold;
};
/**
* struct connected_pno_band_rssi_pref - BSS preference based on band
* and RSSI
* @band: band preference
* @rssi_pref: RSSI preference
*/
struct cpno_band_rssi_pref {
int8_t band;
int8_t rssi;
};
/**
* struct pno_scan_req_params - PNO Scan request structure
* @enable: flag to enable or disable
* @modePNO: PNO Mode
* @ucNetworksCount: Number of networks
* @do_passive_scan: Flag to request passive scan to fw
* @aNetworks: Preferred network list
* @sessionId: Session identifier
* @fast_scan_period: Fast Scan period
* @slow_scan_period: Slow scan period
* @delay_start_time: delay in seconds to use before starting the first scan
* @fast_scan_max_cycles: Fast scan max cycles
* @scan_backoff_multiplier: multiply fast scan period by this after max cycles
* @us24GProbeTemplateLen: 2.4G probe template length
* @p24GProbeTemplate: 2.4G probe template
* @us5GProbeTemplateLen: 5G probe template length
* @p5GProbeTemplate: 5G probe template
* @pno_channel_prediction: PNO channel prediction feature status
* @top_k_num_of_channels: top K number of channels are used for tanimoto
* distance calculation.
* @stationary_thresh: threshold value to determine that the STA is stationary.
* @pnoscan_adaptive_dwell_mode: adaptive dwelltime mode for pno scan
* @channel_prediction_full_scan: periodic timer upon which a full scan needs
* to be triggered.
* @enable_pno_scan_randomization: enable pno scan randomization feature
* @mac_addr: MAC address used with randomization
* @mac_addr_mask: MAC address mask used with randomization, bits that
* are 0 in the mask should be randomized, bits that are 1 should
* be taken from the @mac_addr
* @relative_rssi_set: Flag to check whether realtive_rssi is set or not
* @relative_rssi: Relative rssi threshold, used for connected pno
* @band_rssi_pref: Band and RSSI preference that can be given to one BSS
* over the other BSS
* @ie_whitelist: set to true for enabling ie whitelisting
* @probe_req_ie_bitmap: contains IEs to be included in probe req
* @num_vendor_oui: number of vendor OUIs
* @oui_field_len: size of total number of OUIs
* @voui: pointer to OUI buffer
*
* E.g.
* { fast_scan_period=120, fast_scan_max_cycles=2,
* slow_scan_period=1800, scan_backoff_multiplier=2 }
* Result: 120s x2, 240s x2, 480s x2, 960s x2, 1800s xN
*/
struct pno_scan_req_params {
uint8_t enable;
enum pno_mode modePNO;
uint8_t ucNetworksCount;
bool do_passive_scan;
struct pno_nw_type aNetworks[WMI_PNO_MAX_SUPP_NETWORKS];
uint8_t sessionId;
uint32_t fast_scan_period;
uint32_t slow_scan_period;
uint32_t delay_start_time;
uint8_t fast_scan_max_cycles;
uint8_t scan_backoff_multiplier;
uint32_t active_min_time;
uint32_t active_max_time;
uint32_t passive_min_time;
uint32_t passive_max_time;
uint16_t us24GProbeTemplateLen;
uint8_t p24GProbeTemplate[WMI_PNO_MAX_PB_REQ_SIZE];
uint16_t us5GProbeTemplateLen;
uint8_t p5GProbeTemplate[WMI_PNO_MAX_PB_REQ_SIZE];
#ifdef FEATURE_WLAN_SCAN_PNO
bool pno_channel_prediction;
uint8_t top_k_num_of_channels;
uint8_t stationary_thresh;
enum wmi_dwelltime_adaptive_mode pnoscan_adaptive_dwell_mode;
uint32_t channel_prediction_full_scan;
#endif
/* mac address randomization attributes */
bool enable_pno_scan_randomization;
uint8_t mac_addr[QDF_MAC_ADDR_SIZE];
uint8_t mac_addr_mask[QDF_MAC_ADDR_SIZE];
bool relative_rssi_set;
int8_t relative_rssi;
struct cpno_band_rssi_pref band_rssi_pref;
/* probe req ie whitelisting attrs */
bool ie_whitelist;
uint32_t probe_req_ie_bitmap[PROBE_REQ_BITMAP_LEN];
uint32_t num_vendor_oui;
uint32_t oui_field_len;
uint8_t *voui;
};
/**
* struct nlo_mawc_params - Motion Aided Wireless Connectivity based
* Network List Offload configuration
* @vdev_id: VDEV ID on which the configuration needs to be applied
* @enable: flag to enable or disable
* @exp_backoff_ratio: ratio of exponential backoff
* @init_scan_interval: initial scan interval(msec)
* @max_scan_interval: max scan interval(msec)
*/
struct nlo_mawc_params {
uint8_t vdev_id;
bool enable;
uint32_t exp_backoff_ratio;
uint32_t init_scan_interval;
uint32_t max_scan_interval;
};
#define WMI_WLAN_EXTSCAN_MAX_CHANNELS 36
#define WMI_WLAN_EXTSCAN_MAX_BUCKETS 16
#define WMI_WLAN_EXTSCAN_MAX_HOTLIST_APS 128
#define WMI_WLAN_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS 64
#define WMI_EXTSCAN_MAX_HOTLIST_SSIDS 8
/**
* struct wifi_scan_channelspec_params - wifi scan channel parameter
* @channel: Frequency in MHz
* @dwellTimeMs: dwell time
* @flush: cached results flush
* @passive: passive scan
* @chnlClass: channel class
*/
struct wifi_scan_channelspec_params {
uint32_t channel;
uint32_t dwellTimeMs;
bool passive;
uint8_t chnlClass;
};
/**
* enum wmi_wifi_band - wifi band
* @WMI_WIFI_BAND_UNSPECIFIED: unspecified band
* @WMI_WIFI_BAND_BG: 2.4 GHz
* @WMI_WIFI_BAND_A: 5 GHz without DFS
* @WMI_WIFI_BAND_ABG: 2.4 GHz + 5 GHz; no DFS
* @WMI_WIFI_BAND_A_DFS_ONLY: 5 GHz DFS only
* @WMI_WIFI_BAND_A_WITH_DFS: 5 GHz with DFS
* @WMI_WIFI_BAND_ABG_WITH_DFS: 2.4 GHz + 5 GHz with DFS
* @WMI_WIFI_BAND_MAX: max range
*/
enum wmi_wifi_band {
WMI_WIFI_BAND_UNSPECIFIED,
WMI_WIFI_BAND_BG = 1,
WMI_WIFI_BAND_A = 2,
WMI_WIFI_BAND_ABG = 3,
WMI_WIFI_BAND_A_DFS_ONLY = 4,
/* 5 is reserved */
WMI_WIFI_BAND_A_WITH_DFS = 6,
WMI_WIFI_BAND_ABG_WITH_DFS = 7,
/* Keep it last */
WMI_WIFI_BAND_MAX
};
/**
* struct wifi_scan_bucket_params - wifi scan bucket spec
* @bucket: bucket identifier
* @band: wifi band
* @period: Desired period, in millisecond; if this is too
* low, the firmware should choose to generate results as fast as
* it can instead of failing the command byte
* for exponential backoff bucket this is the min_period
* @reportEvents: 0 => normal reporting (reporting rssi history
* only, when rssi history buffer is % full)
* 1 => same as 0 + report a scan completion event after scanning
* this bucket
* 2 => same as 1 + forward scan results
* (beacons/probe responses + IEs) in real time to HAL
* @max_period: if max_period is non zero or different than period,
* then this bucket is an exponential backoff bucket and
* the scan period will grow exponentially as per formula:
* actual_period(N) = period ^ (N/(step_count+1)) to a
* maximum period of max_period
* @exponent: for exponential back off bucket: multiplier:
* new_period = old_period * exponent
* @step_count: for exponential back off bucket, number of scans performed
* at a given period and until the exponent is applied
* @numChannels: channels to scan; these may include DFS channels
* Note that a given channel may appear in multiple buckets
* @min_dwell_time_active: per bucket minimum active dwell time
* @max_dwell_time_active: per bucket maximum active dwell time
* @min_dwell_time_passive: per bucket minimum passive dwell time
* @max_dwell_time_passive: per bucket maximum passive dwell time
* @channels: Channel list
*/
struct wifi_scan_bucket_params {
uint8_t bucket;
enum wmi_wifi_band band;
uint32_t period;
uint32_t reportEvents;
uint32_t max_period;
uint32_t exponent;
uint32_t step_count;
uint32_t numChannels;
uint32_t min_dwell_time_active;
uint32_t max_dwell_time_active;
uint32_t min_dwell_time_passive;
uint32_t max_dwell_time_passive;
struct wifi_scan_channelspec_params channels[WMI_WLAN_EXTSCAN_MAX_CHANNELS];
};
/**
* struct wifi_scan_cmd_req_params - wifi scan command request params
* @basePeriod: base timer period
* @maxAPperScan: max ap per scan
* @report_threshold_percent: report threshold
* in %, when buffer is this much full, wake up host
* @report_threshold_num_scans: report threshold number of scans
* in number of scans, wake up host after these many scans
* @requestId: request id
* @sessionId: session id
* @numBuckets: number of buckets
* @min_dwell_time_active: per bucket minimum active dwell time
* @max_dwell_time_active: per bucket maximum active dwell time
* @min_dwell_time_passive: per bucket minimum passive dwell time
* @max_dwell_time_passive: per bucket maximum passive dwell time
* @configuration_flags: configuration flags
* @extscan_adaptive_dwell_mode: adaptive dwelltime mode for extscan
* @buckets: buckets array
*/
struct wifi_scan_cmd_req_params {
uint32_t basePeriod;
uint32_t maxAPperScan;
uint32_t report_threshold_percent;
uint32_t report_threshold_num_scans;
uint32_t requestId;
uint8_t sessionId;
uint32_t numBuckets;
uint32_t min_dwell_time_active;
uint32_t max_dwell_time_active;
uint32_t min_dwell_time_passive;
uint32_t max_dwell_time_passive;
uint32_t configuration_flags;
enum wmi_dwelltime_adaptive_mode extscan_adaptive_dwell_mode;
struct wifi_scan_bucket_params buckets[WMI_WLAN_EXTSCAN_MAX_BUCKETS];
};
#define WMI_CFG_VALID_CHANNEL_LIST_LEN 100
/* Occupied channel list remains static */
#define WMI_CHANNEL_LIST_STATIC 1
/* Occupied channel list can be learnt after init */
#define WMI_CHANNEL_LIST_DYNAMIC_INIT 2
/* Occupied channel list can be learnt after flush */
#define WMI_CHANNEL_LIST_DYNAMIC_FLUSH 3
/* Occupied channel list can be learnt after update */
#define WMI_CHANNEL_LIST_DYNAMIC_UPDATE 4
/**
* struct plm_req_params - plm req parameter
* @diag_token: Dialog token
* @meas_token: measurement token
* @num_bursts: total number of bursts
* @burst_int: burst interval in seconds
* @meas_duration:in TU's,STA goes off-ch
* @burst_len: no of times the STA should cycle through PLM ch list
* @desired_tx_pwr: desired tx power
* @mac_addr: MC dest addr
* @plm_num_ch: channel numbers
* @plm_ch_list: channel list
* @session_id: session id
* @enable: enable/disable
*/
struct plm_req_params {
uint16_t diag_token;
uint16_t meas_token;
uint16_t num_bursts;
uint16_t burst_int;
uint16_t meas_duration;
/* no of times the STA should cycle through PLM ch list */
uint8_t burst_len;
int8_t desired_tx_pwr;
struct qdf_mac_addr mac_addr;
/* no of channels */
uint8_t plm_num_ch;
/* channel numbers */
uint8_t plm_ch_list[WMI_CFG_VALID_CHANNEL_LIST_LEN];
uint8_t session_id;
bool enable;
};
#define MAX_SSID_ALLOWED_LIST 4
#define MAX_BSSID_AVOID_LIST 16
#define MAX_BSSID_FAVORED 16
#define MAX_RSSI_AVOID_BSSID_LIST 10
/**
* struct mac_ts_info_tfc - mac ts info parameters
* @burstSizeDefn: burst size
* @reserved: reserved
* @ackPolicy: ack policy
* @psb: psb
* @aggregation: aggregation
* @accessPolicy: access policy
* @direction: direction
* @tsid: direction
* @trafficType: traffic type
*/
struct mac_ts_info_tfc {
#ifndef ANI_LITTLE_BIT_ENDIAN
uint8_t burstSizeDefn:1;
uint8_t reserved:7;
#else
uint8_t reserved:7;
uint8_t burstSizeDefn:1;
#endif
#ifndef ANI_LITTLE_BIT_ENDIAN
uint16_t ackPolicy:2;
uint16_t userPrio:3;
uint16_t psb:1;
uint16_t aggregation:1;
uint16_t accessPolicy:2;
uint16_t direction:2;
uint16_t tsid:4;
uint16_t trafficType:1;
#else
uint16_t trafficType:1;
uint16_t tsid:4;
uint16_t direction:2;
uint16_t accessPolicy:2;
uint16_t aggregation:1;
uint16_t psb:1;
uint16_t userPrio:3;
uint16_t ackPolicy:2;
#endif
} qdf_packed;
/**
* struct mac_ts_info_sch - mac ts info schedule parameters
* @rsvd: reserved
* @schedule: schedule bit
*/
struct mac_ts_info_sch {
#ifndef ANI_LITTLE_BIT_ENDIAN
uint8_t rsvd:7;
uint8_t schedule:1;
#else
uint8_t schedule:1;
uint8_t rsvd:7;
#endif
} qdf_packed;
/**
* struct mac_ts_info_sch - mac ts info schedule parameters
* @traffic: mac tfc parameter
* @schedule: mac schedule parameters
*/
struct mac_ts_info {
struct mac_ts_info_tfc traffic;
struct mac_ts_info_sch schedule;
} qdf_packed;
/**
* struct mac_tspec_ie - mac ts spec
* @type: type
* @length: length
* @tsinfo: tsinfo
* @nomMsduSz: nomMsduSz
* @maxMsduSz: maxMsduSz
* @minSvcInterval: minSvcInterval
* @maxSvcInterval: maxSvcInterval
* @inactInterval: inactInterval
* @suspendInterval: suspendInterval
* @svcStartTime: svcStartTime
* @minDataRate: minDataRate
* @meanDataRate: meanDataRate
* @peakDataRate: peakDataRate
* @maxBurstSz: maxBurstSz
* @delayBound: delayBound
* @minPhyRate: minPhyRate
* @surplusBw: surplusBw
* @mediumTime: mediumTime
*/
struct mac_tspec_ie {
uint8_t type;
uint8_t length;
struct mac_ts_info tsinfo;
uint16_t nomMsduSz;
uint16_t maxMsduSz;
uint32_t minSvcInterval;
uint32_t maxSvcInterval;
uint32_t inactInterval;
uint32_t suspendInterval;
uint32_t svcStartTime;
uint32_t minDataRate;
uint32_t meanDataRate;
uint32_t peakDataRate;
uint32_t maxBurstSz;
uint32_t delayBound;
uint32_t minPhyRate;
uint16_t surplusBw;
uint16_t mediumTime;
} qdf_packed;
/**
* struct add_ts_param - ADDTS related parameters
* @staIdx: station index
* @tspecIdx: TSPEC handler uniquely identifying a TSPEC for a STA in a BSS
* @tspec: tspec value
* @status: CDF status
* @sessionId: session id
* @tsm_interval: TSM interval period passed from UMAC to WMI
* @setRICparams: RIC parameters
* @sme_session_id: sme session id
*/
struct add_ts_param {
uint16_t staIdx;
uint16_t tspecIdx;
struct mac_tspec_ie tspec;
QDF_STATUS status;
uint8_t sessionId;
#ifdef FEATURE_WLAN_ESE
uint16_t tsm_interval;
#endif /* FEATURE_WLAN_ESE */
#ifdef WLAN_FEATURE_ROAM_OFFLOAD
uint8_t setRICparams;
#endif /* WLAN_FEATURE_ROAM_OFFLOAD */
uint8_t sme_session_id;
};
/**
* struct delts_req_info - DELTS request parameter
* @tsinfo: ts info
* @tspec: ts spec
* @wmeTspecPresent: wme ts spec flag
* @wsmTspecPresent: wsm ts spec flag
* @lleTspecPresent: lle ts spec flag
*/
struct delts_req_info {
struct mac_ts_info tsinfo;
struct mac_tspec_ie tspec;
uint8_t wmeTspecPresent:1;
uint8_t wsmTspecPresent:1;
uint8_t lleTspecPresent:1;
};
/**
* struct del_ts_params - DELTS related parameters
* @staIdx: station index
* @tspecIdx: TSPEC identifier uniquely identifying a TSPEC for a STA in a BSS
* @bssId: BSSID
* @sessionId: session id
* @userPrio: user priority
* @delTsInfo: DELTS info
* @setRICparams: RIC parameters
*/
struct del_ts_params {
uint16_t staIdx;
uint16_t tspecIdx;
uint8_t bssId[IEEE80211_ADDR_LEN];
uint8_t sessionId;
uint8_t userPrio;
#ifdef WLAN_FEATURE_ROAM_OFFLOAD
struct delts_req_info delTsInfo;
uint8_t setRICparams;
#endif /* WLAN_FEATURE_ROAM_OFFLOAD */
};
/**
* struct ll_stats_clear_params - ll stats clear parameter
* @req_id: request id
* @sta_id: sta id
* @stats_clear_mask: stats clear mask
* @stop_req: stop request
*/
struct ll_stats_clear_params {
uint32_t req_id;
uint8_t sta_id;
uint32_t stats_clear_mask;
uint8_t stop_req;
};
/**
* struct ll_stats_set_params - ll stats get parameter
* @req_id: request id
* @sta_id: sta id
* @mpdu_size_threshold: mpdu sixe threshold
* @aggressive_statistics_gathering: aggressive_statistics_gathering
*/
struct ll_stats_set_params {
uint32_t req_id;
uint8_t sta_id;
uint32_t mpdu_size_threshold;
uint32_t aggressive_statistics_gathering;
};
/**
* struct ll_stats_get_params - ll stats parameter
* @req_id: request id
* @sta_id: sta id
* @param_id_mask: param is mask
*/
struct ll_stats_get_params {
uint32_t req_id;
uint8_t sta_id;
uint32_t param_id_mask;
};
/**
* struct pe_stats_req - pe stats parameter
* @msg_type: message type is same as the request type
* @msg_len: length of the entire request
* @sta_id: Per STA stats request must contain valid
* @stats_mask: categories of stats requested
* @session_id: wsm ts spec flag
*/
struct pe_stats_req {
/* Common for all types are requests */
uint16_t msg_type;
uint16_t msg_len;
uint32_t sta_id;
/* categories of stats requested. look at ePEStatsMask */
uint32_t stats_mask;
uint8_t session_id;
};
/**
* struct link_status_params - link stats parameter
* @msg_type: message type is same as the request type
* @msg_len: length of the entire request
* @link_status: wme ts spec flag
* @session_id: wsm ts spec flag
*/
struct link_status_params {
uint16_t msg_type;
uint16_t msg_len;
uint8_t link_status;
uint8_t session_id;
};
/**
* struct dhcp_stop_ind_params - DHCP Stop indication message
* @msgtype: message type is same as the request type
* @msglen: length of the entire request
* @device_mode: Mode of the device(ex:STA, AP)
* @adapter_macaddr: MAC address of the adapter
* @peer_macaddr: MAC address of the connected peer
*/
struct dhcp_stop_ind_params {
uint16_t msgtype;
uint16_t msglen;
uint8_t device_mode;
struct qdf_mac_addr adapter_macaddr;
struct qdf_mac_addr peer_macaddr;
};
/**
* struct aggr_add_ts_param - ADDTS parameters
* @staIdx: station index
* @tspecIdx: TSPEC handler uniquely identifying a TSPEC for a STA in a BSS
* @tspec: tspec value
* @status: CDF status
* @sessionId: session id
*/
struct aggr_add_ts_param {
uint16_t staIdx;
uint16_t tspecIdx;
struct mac_tspec_ie tspec[WMI_QOS_NUM_AC_MAX];
QDF_STATUS status[WMI_QOS_NUM_AC_MAX];
uint8_t sessionId;
};
/**
* struct wlm_latency_level_param - WLM parameters
* @wlm_latency_level: wlm latency level to set
* 0 - normal, 1 - moderate, 2 - low, 3 - ultralow
* @wlm_latency_flags: wlm latency flags to set
* |31 12| 11 | 10 |9 8|7 6|5 4|3 2| 1 | 0 |
* +------+------+------+------+------+------+------+-----+-----+
* | RSVD | SSLP | CSLP | RSVD | Roam | RSVD | DWLT | DFS | SUP |
* +------+-------------+-------------+-------------------------+
* | WAL | PS | Roam | Scan |
*
* bit 0: Avoid scan request from HLOS if setting
* bit 1: Skip DFS channel SCAN if setting
* bit 2-3: Define policy of dwell time/duration for each foreign channel
* (b2 b3)
* (0 0 ): Default scan dwell time
* (0 1 ): Reserve
* (1 0 ): Shrink off channel dwell time
* (1 1 ): Reserve
* bit 4-5: Reserve for scan
* bit 6-7: Define roaming policy
* (b6 b7)
* (0 0 ): Default roaming behavior, allow roaming in all scenarios
* (0 1 ): Disallow all roaming
* (1 0 ): Allow roaming when final bmissed
* (1 1 ): Reserve
* bit 8-9: Reserve for roaming
* bit 10: Disable css power collapse if setting
* bit 11: Disable sys sleep if setting
* bit 12-31: Reserve for future useage
* @vdev_id: vdev id
*/
struct wlm_latency_level_param {
uint16_t wlm_latency_level;
uint32_t wlm_latency_flags;
uint16_t vdev_id;
};
#define WMI_MAX_FILTER_TEST_DATA_LEN 8
#define WMI_MAX_NUM_MULTICAST_ADDRESS 240
#define WMI_MAX_NUM_FILTERS 20
#define WMI_MAX_NUM_TESTS_PER_FILTER 10
/**
* enum packet_filter_type - packet filter type
* @WMI_RCV_FILTER_TYPE_INVALID: invalid type
* @WMI_RCV_FILTER_TYPE_FILTER_PKT: filter packet type
* @WMI_RCV_FILTER_TYPE_BUFFER_PKT: buffer packet type
* @WMI_RCV_FILTER_TYPE_MAX_ENUM_SIZE: max enum size
*/
enum packet_filter_type {
WMI_RCV_FILTER_TYPE_INVALID,
WMI_RCV_FILTER_TYPE_FILTER_PKT,
WMI_RCV_FILTER_TYPE_BUFFER_PKT,
WMI_RCV_FILTER_TYPE_MAX_ENUM_SIZE
};
/**
* enum packet_protocol_type - packet protocol type
* @WMI_FILTER_HDR_TYPE_INVALID: invalid type
* @WMI_FILTER_HDR_TYPE_MAC: mac type
* @WMI_FILTER_HDR_TYPE_ARP: trp type
* @WMI_FILTER_HDR_TYPE_IPV4: ipv4 type
* @WMI_FILTER_HDR_TYPE_IPV6: ipv6 type
* @WMI_FILTER_HDR_TYPE_UDP: udp type
* @WMI_FILTER_HDR_TYPE_MAX: max type
*/
enum packet_protocol_type {
WMI_FILTER_HDR_TYPE_INVALID,
WMI_FILTER_HDR_TYPE_MAC,
WMI_FILTER_HDR_TYPE_ARP,
WMI_FILTER_HDR_TYPE_IPV4,
WMI_FILTER_HDR_TYPE_IPV6,
WMI_FILTER_HDR_TYPE_UDP,
WMI_FILTER_HDR_TYPE_MAX
};
/**
* enum packet_filter_comp_type - packet filter comparison type
* @WMI_FILTER_CMP_TYPE_INVALID: invalid type
* @WMI_FILTER_CMP_TYPE_EQUAL: type equal
* @WMI_FILTER_CMP_TYPE_MASK_EQUAL: mask equal
* @WMI_FILTER_CMP_TYPE_NOT_EQUAL: type not equal
* @WMI_FILTER_CMP_TYPE_MASK_NOT_EQUAL: mask not equal
* @WMI_FILTER_CMP_TYPE_MAX: max type
*/
enum packet_filter_comp_type {
WMI_FILTER_CMP_TYPE_INVALID,
WMI_FILTER_CMP_TYPE_EQUAL,
WMI_FILTER_CMP_TYPE_MASK_EQUAL,
WMI_FILTER_CMP_TYPE_NOT_EQUAL,
WMI_FILTER_CMP_TYPE_MASK_NOT_EQUAL,
WMI_FILTER_CMP_TYPE_MAX
};
/**
* struct rcv_pkt_filter_params - recieve packet filter parameters
* @protocolLayer - protocol layer
* @cmpFlag - comparison flag
* @dataLength - data length
* @dataOffset - data offset
* @reserved - resserved
* @compareData - compare data
* @dataMask - data mask
*/
struct rcv_pkt_filter_params {
enum packet_protocol_type protocolLayer;
enum packet_filter_comp_type cmpFlag;
uint16_t dataLength;
uint8_t dataOffset;
uint8_t reserved;
uint8_t compareData[WMI_MAX_FILTER_TEST_DATA_LEN];
uint8_t dataMask[WMI_MAX_FILTER_TEST_DATA_LEN];
};
/**
* struct rcv_pkt_filter_config - recieve packet filter info
* @filterId - filter id
* @filterType - filter type
* @numFieldParams - no of fields
* @coalesceTime - reserved parameter
* @self_macaddr - self mac address
* @bssid - Bssid of the connected AP
* @paramsData - data parameter
*/
struct rcv_pkt_filter_config {
uint8_t filterId;
enum packet_filter_type filterType;
uint32_t numFieldParams;
uint32_t coalesceTime;
struct qdf_mac_addr self_macaddr;
struct qdf_mac_addr bssid;
struct rcv_pkt_filter_params paramsData[WMI_MAX_NUM_TESTS_PER_FILTER];
};
/**
* struct vdev_ie_info_param - IE info
* @vdev_id - vdev for which the IE is being sent
* @ie_id - ID of the IE
* @length - length of the IE data
* @data - IE data
*
* This structure is used to store the IE information.
*/
struct vdev_ie_info_param {
uint32_t vdev_id;
uint32_t ie_id;
uint32_t length;
uint32_t ie_source;
uint32_t band;
uint8_t *data;
};
#define WMI_MAX_NUM_FW_SEGMENTS 4
/**
* struct fw_dump_seg_req_param - individual segment details
* @seg_id - segment id.
* @seg_start_addr_lo - lower address of the segment.
* @seg_start_addr_hi - higher address of the segment.
* @seg_length - length of the segment.
* @dst_addr_lo - lower address of the destination buffer.
* @dst_addr_hi - higher address of the destination buffer.
*
* This structure carries the information to firmware about the
* individual segments. This structure is part of firmware memory
* dump request.
*/
struct fw_dump_seg_req_param {
uint8_t seg_id;
uint32_t seg_start_addr_lo;
uint32_t seg_start_addr_hi;
uint32_t seg_length;
uint32_t dst_addr_lo;
uint32_t dst_addr_hi;
};
/**
* struct fw_dump_req_param - firmware memory dump request details.
* @request_id - request id.
* @num_seg - requested number of segments.
* @fw_dump_seg_req - individual segment information.
*
* This structure carries information about the firmware
* memory dump request.
*/
struct fw_dump_req_param {
uint32_t request_id;
uint32_t num_seg;
struct fw_dump_seg_req_param segment[WMI_MAX_NUM_FW_SEGMENTS];
};
#define WMI_TDLS_MAX_SUPP_CHANNELS 128
#define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
#define WMI_2_4_GHZ_MAX_FREQ 3000
/**
* struct tdls_update_ch_params - channel parameters
* @chanId: ID of the channel
* @pwr: power level
* @dfsSet: is dfs supported or not
* @half_rate: is the channel operating at 10MHz
* @quarter_rate: is the channel operating at 5MHz
*/
struct tdls_update_ch_params {
uint8_t chanId;
uint8_t pwr;
bool dfsSet;
bool half_rate;
bool quarter_rate;
};
/**
* struct tdls_peer_cap_params - TDLS peer capablities parameters
* @isPeerResponder: is peer responder or not
* @peerUapsdQueue: peer uapsd queue
* @peerMaxSp: peer max SP value
* @peerBuffStaSupport: peer buffer sta supported or not
* @peerOffChanSupport: peer offchannel support
* @peerCurrOperClass: peer current operating class
* @selfCurrOperClass: self current operating class
* @peerChanLen: peer channel length
* @peerChan: peer channel list
* @peerOperClassLen: peer operating class length
* @peerOperClass: peer operating class
* @prefOffChanNum: peer offchannel number
* @prefOffChanBandwidth: peer offchannel bandwidth
* @opClassForPrefOffChan: operating class for offchannel
*/
struct tdls_peer_cap_params {
uint8_t isPeerResponder;
uint8_t peerUapsdQueue;
uint8_t peerMaxSp;
uint8_t peerBuffStaSupport;
uint8_t peerOffChanSupport;
uint8_t peerCurrOperClass;
uint8_t selfCurrOperClass;
uint8_t peerChanLen;
struct tdls_update_ch_params peerChan[WMI_TDLS_MAX_SUPP_CHANNELS];
uint8_t peerOperClassLen;
uint8_t peerOperClass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
uint8_t prefOffChanNum;
uint8_t prefOffChanBandwidth;
uint8_t opClassForPrefOffChan;
};
/**
* struct tdls_peer_state_params - TDLS peer state parameters
* @vdevId: vdev id
* @peerMacAddr: peer mac address
* @peerCap: peer capabality
*/
struct tdls_peer_state_params {
uint32_t vdevId;
uint8_t peerMacAddr[IEEE80211_ADDR_LEN];
uint32_t peerState;
struct tdls_peer_cap_params peerCap;
};
/**
* struct wmi_tdls_params - TDLS parameters
* @vdev_id: vdev id
* @tdls_state: TDLS state
* @notification_interval_ms: notification inerval
* @tx_discovery_threshold: tx discovery threshold
* @tx_teardown_threshold: tx teardown threashold
* @rssi_teardown_threshold: RSSI teardown threshold
* @rssi_delta: RSSI delta
* @tdls_options: TDLS options
* @peer_traffic_ind_window: raffic indication window
* @peer_traffic_response_timeout: traffic response timeout
* @puapsd_mask: uapsd mask
* @puapsd_inactivity_time: uapsd inactivity time
* @puapsd_rx_frame_threshold: uapsd rx frame threshold
* @teardown_notification_ms: tdls teardown notification interval
* @tdls_peer_kickout_threshold: tdls packet threshold for
* peer kickout operation
*/
struct wmi_tdls_params {
uint32_t vdev_id;
uint32_t tdls_state;
uint32_t notification_interval_ms;
uint32_t tx_discovery_threshold;
uint32_t tx_teardown_threshold;
int32_t rssi_teardown_threshold;
int32_t rssi_delta;
uint32_t tdls_options;
uint32_t peer_traffic_ind_window;
uint32_t peer_traffic_response_timeout;
uint32_t puapsd_mask;
uint32_t puapsd_inactivity_time;
uint32_t puapsd_rx_frame_threshold;
uint32_t teardown_notification_ms;
uint32_t tdls_peer_kickout_threshold;
};
/**
* struct tdls_chan_switch_params - channel switch parameter structure
* @vdev_id: vdev ID
* @peer_mac_addr: Peer mac address
* @tdls_off_ch_bw_offset: Target off-channel bandwitdh offset
* @tdls_off_ch: Target Off Channel
* @oper_class: Operating class for target channel
* @is_responder: Responder or initiator
*/
struct tdls_channel_switch_params {
uint32_t vdev_id;
uint8_t peer_mac_addr[IEEE80211_ADDR_LEN];
uint16_t tdls_off_ch_bw_offset;
uint8_t tdls_off_ch;
uint8_t tdls_sw_mode;
uint8_t oper_class;
uint8_t is_responder;
};
/**
* struct dhcp_offload_info_params - dhcp offload parameters
* @vdev_id: request data length
* @dhcpSrvOffloadEnabled: dhcp offload enabled
* @dhcpClientNum: dhcp client no
* @dhcpSrvIP: dhcp server ip
*/
struct dhcp_offload_info_params {
uint32_t vdev_id;
uint32_t dhcpSrvOffloadEnabled;
uint32_t dhcpClientNum;
uint32_t dhcpSrvIP;
};
/**
* struct nan_req_params - NAN request params
* @request_data_len: request data length
* @request_data: request data
*/
struct nan_req_params {
uint16_t request_data_len;
uint8_t request_data[];
};
/**
* struct app_type2_params - app type2parameter
* @vdev_id: vdev id
* @rc4_key: rc4 key
* @rc4_key_len: rc4 key length
* @ip_id: NC id
* @ip_device_ip: NC IP addres
* @ip_server_ip: Push server IP address
* @tcp_src_port: NC TCP port
* @tcp_dst_port: Push server TCP port
* @tcp_seq: tcp sequence
* @tcp_ack_seq: tcp ack sequence
* @keepalive_init: Initial ping interval
* @keepalive_min: Minimum ping interval
* @keepalive_max: Maximum ping interval
* @keepalive_inc: Increment of ping interval
* @gateway_mac: gateway mac address
* @tcp_tx_timeout_val: tcp tx timeout value
* @tcp_rx_timeout_val: tcp rx timeout value
*/
struct app_type2_params {
uint8_t vdev_id;
uint8_t rc4_key[16];
uint32_t rc4_key_len;
/** ip header parameter */
uint32_t ip_id;
uint32_t ip_device_ip;
uint32_t ip_server_ip;
/** tcp header parameter */
uint16_t tcp_src_port;
uint16_t tcp_dst_port;
uint32_t tcp_seq;
uint32_t tcp_ack_seq;
uint32_t keepalive_init;
uint32_t keepalive_min;
uint32_t keepalive_max;
uint32_t keepalive_inc;
struct qdf_mac_addr gateway_mac;
uint32_t tcp_tx_timeout_val;
uint32_t tcp_rx_timeout_val;
};
/**
* struct app_type1_params - app type1 parameter
* @vdev_id: vdev id
* @wakee_mac_addr: mac address
* @identification_id: identification id
* @password: password
* @id_length: id length
* @pass_length: password length
*/
struct app_type1_params {
uint8_t vdev_id;
struct qdf_mac_addr wakee_mac_addr;
uint8_t identification_id[8];
uint8_t password[16];
uint32_t id_length;
uint32_t pass_length;
};
/**
* enum wmi_ext_wow_type - wow type
* @WMI_EXT_WOW_TYPE_APP_TYPE1: only enable wakeup for app type1
* @WMI_EXT_WOW_TYPE_APP_TYPE2: only enable wakeup for app type2
* @WMI_EXT_WOW_TYPE_APP_TYPE1_2: enable wakeup for app type1&2
*/
enum wmi_ext_wow_type {
WMI_EXT_WOW_TYPE_APP_TYPE1,
WMI_EXT_WOW_TYPE_APP_TYPE2,
WMI_EXT_WOW_TYPE_APP_TYPE1_2,
};
/**
* struct ext_wow_params - ext wow parameters
* @vdev_id: vdev id
* @type: wow type
* @wakeup_pin_num: wake up gpio no
*/
struct ext_wow_params {
uint8_t vdev_id;
enum wmi_ext_wow_type type;
uint32_t wakeup_pin_num;
};
/**
* struct stats_ext_params - ext stats request
* @vdev_id: vdev id
* @request_data_len: request data length
* @request_data: request data
*/
struct stats_ext_params {
uint32_t vdev_id;
uint32_t request_data_len;
uint8_t request_data[];
};
#define WMI_PERIODIC_TX_PTRN_MAX_SIZE 1536
/**
* struct periodic_tx_pattern - periodic tx pattern
* @mac_address: MAC Address for the adapter
* @ucPtrnId: Pattern ID
* @ucPtrnSize: Pattern size
* @usPtrnIntervalMs: in ms
* @ucPattern: Pattern buffer
*/
struct periodic_tx_pattern {
struct qdf_mac_addr mac_address;
uint8_t ucPtrnId;
uint16_t ucPtrnSize;
uint32_t usPtrnIntervalMs;
uint8_t ucPattern[WMI_PERIODIC_TX_PTRN_MAX_SIZE];
};
#define WMI_GTK_OFFLOAD_KEK_BYTES_LEGACY 16
#define WMI_GTK_OFFLOAD_KEK_BYTES 64
#define WMI_GTK_OFFLOAD_KCK_BYTES 16
#define WMI_GTK_OFFLOAD_ENABLE 0
#define WMI_GTK_OFFLOAD_DISABLE 1
/**
* struct gtk_offload_params - gtk offload parameters
* @ulFlags: optional flags
* @aKCK: Key confirmation key
* @aKEK: key encryption key
* @kek_len: Kek length
* @ullKeyReplayCounter: replay counter
* @bssid: bss id
*/
struct gtk_offload_params {
uint32_t ulFlags;
uint8_t aKCK[WMI_GTK_OFFLOAD_KCK_BYTES];
uint8_t aKEK[WMI_GTK_OFFLOAD_KEK_BYTES];
uint32_t kek_len;
uint64_t ullKeyReplayCounter;
struct qdf_mac_addr bssid;
};
/**
* struct mcast_filter_params - mcast filter parameters
* @multicast_addr_cnt: num of addresses
* @multicast_addr: address array
* @action: operation to perform
*/
struct mcast_filter_params {
uint32_t multicast_addr_cnt;
struct qdf_mac_addr multicast_addr[WMI_MAX_NUM_MULTICAST_ADDRESS];
uint8_t action;
};
/**
* struct flashing_req_params - led flashing parameter
* @reqId: request id
* @pattern_id: pattern identifier. 0: disconnected 1: connected
* @led_x0: led flashing parameter0
* @led_x1: led flashing parameter1
*/
struct flashing_req_params {
uint32_t req_id;
uint32_t pattern_id;
uint32_t led_x0;
uint32_t led_x1;
};
#define MAX_MEM_CHUNKS 32
/**
* struct wmi_host_mem_chunk - host memory chunk structure
* @vaddr: Pointer to virtual address
* @paddr: Physical address
* @memctx: qdf memory context for mapped address.
* @len: length of chunk
* @req_id: request id from target
*/
struct wmi_host_mem_chunk {
uint32_t *vaddr;
uint32_t paddr;
qdf_dma_mem_context(memctx);
uint32_t len;
uint32_t req_id;
};
/**
* struct target_resource_config - Resource config given to target
* This structure is union of wmi_resource_config defined
* by both TLV and non-TLV target.
*/
struct target_resource_config {
uint32_t num_vdevs;
uint32_t num_peers;
uint32_t num_active_peers;
uint32_t num_offload_peers;
uint32_t num_offload_reorder_buffs;
uint32_t num_peer_keys;
uint32_t num_tids;
uint32_t ast_skid_limit;
uint32_t tx_chain_mask;
uint32_t rx_chain_mask;
uint32_t rx_timeout_pri[4];
uint32_t rx_decap_mode;
uint32_t scan_max_pending_req;
uint32_t bmiss_offload_max_vdev;
uint32_t roam_offload_max_vdev;
uint32_t roam_offload_max_ap_profiles;
uint32_t num_mcast_groups;
uint32_t num_mcast_table_elems;
uint32_t mcast2ucast_mode;
uint32_t tx_dbg_log_size;
uint32_t num_wds_entries;
uint32_t dma_burst_size;
uint32_t mac_aggr_delim;
uint32_t rx_skip_defrag_timeout_dup_detection_check;
uint32_t vow_config;
uint32_t gtk_offload_max_vdev;
uint32_t num_msdu_desc; /* Number of msdu desc */
uint32_t max_frag_entries;
/* End common */
/* Added in MCL */
uint32_t num_tdls_vdevs;
uint32_t num_tdls_conn_table_entries;
uint32_t beacon_tx_offload_max_vdev;
uint32_t num_multicast_filter_entries;
uint32_t num_wow_filters;
uint32_t num_keep_alive_pattern;
uint32_t keep_alive_pattern_size;
uint32_t max_tdls_concurrent_sleep_sta;
uint32_t max_tdls_concurrent_buffer_sta;
uint32_t wmi_send_separate;
uint32_t num_ocb_vdevs;
uint32_t num_ocb_channels;
uint32_t num_ocb_schedules;
};
/**
* struct wmi_wifi_start_log - Structure to store the params sent to start/
* stop logging
* @name: Attribute which indicates the type of logging like per packet
* statistics, connectivity etc.
* @verbose_level: Verbose level which can be 0,1,2,3
* @flag: Flag field for future use
*/
struct wmi_wifi_start_log {
uint32_t ring_id;
uint32_t verbose_level;
uint32_t flag;
};
/**
* struct wmi_pcl_list - Format of PCL
* @pcl_list: List of preferred channels
* @weight_list: Weights of the PCL
* @pcl_len: Number of channels in the PCL
*/
struct wmi_pcl_list {
uint8_t pcl_list[128];
uint8_t weight_list[128];
uint32_t pcl_len;
};
/**
* struct wmi_pcl_chan_weights - Params to get the valid weighed list
* @pcl_list: Preferred channel list already sorted in the order of preference
* @pcl_len: Length of the PCL
* @saved_chan_list: Valid channel list updated as part of
* WMA_UPDATE_CHAN_LIST_REQ
* @saved_num_chan: Length of the valid channel list
* @weighed_valid_list: Weights of the valid channel list. This will have one
* to one mapping with valid_chan_list. FW expects channel order and size to be
* as per the list provided in WMI_SCAN_CHAN_LIST_CMDID.
* @weight_list: Weights assigned by policy manager
*/
struct wmi_pcl_chan_weights {
uint8_t pcl_list[MAX_NUM_CHAN];
uint32_t pcl_len;
uint8_t saved_chan_list[MAX_NUM_CHAN];
uint32_t saved_num_chan;
uint8_t weighed_valid_list[MAX_NUM_CHAN];
uint8_t weight_list[MAX_NUM_CHAN];
};
/**
* struct wmi_hw_mode_params - HW mode params
* @mac0_tx_ss: MAC0 Tx spatial stream
* @mac0_rx_ss: MAC0 Rx spatial stream
* @mac1_tx_ss: MAC1 Tx spatial stream
* @mac1_rx_ss: MAC1 Rx spatial stream
* @mac0_bw: MAC0 bandwidth
* @mac1_bw: MAC1 bandwidth
* @dbs_cap: DBS capabality
* @agile_dfs_cap: Agile DFS capabality
*/
struct wmi_hw_mode_params {
uint8_t mac0_tx_ss;
uint8_t mac0_rx_ss;
uint8_t mac1_tx_ss;
uint8_t mac1_rx_ss;
uint8_t mac0_bw;
uint8_t mac1_bw;
uint8_t dbs_cap;
uint8_t agile_dfs_cap;
};
/**
* struct wmi_dual_mac_config - Dual MAC configuration
* @scan_config: Scan configuration
* @fw_mode_config: FW mode configuration
* @set_dual_mac_cb: Callback function to be executed on response to the command
*/
struct wmi_dual_mac_config {
uint32_t scan_config;
uint32_t fw_mode_config;
void *set_dual_mac_cb;
};
#ifdef WLAN_NS_OFFLOAD
/**
* struct ns_offload_req_params - ns offload request paramter
* @srcIPv6Addr: src ipv6 address
* @selfIPv6Addr: self ipv6 address
* @targetIPv6Addr: target ipv6 address
* @self_macaddr: self mac address
* @srcIPv6AddrValid: src ipv6 address valid flag
* @targetIPv6AddrValid: target ipv6 address valid flag
* @target_ipv6_addr_ac_type: target ipv6 address type
* @slotIdx: slot index
*/
struct ns_offload_req_params {
uint8_t srcIPv6Addr[WMI_MAC_IPV6_ADDR_LEN];
uint8_t selfIPv6Addr[WMI_MAC_NUM_TARGET_IPV6_NS_OFFLOAD_NA][WMI_MAC_IPV6_ADDR_LEN];
uint8_t targetIPv6Addr[WMI_MAC_NUM_TARGET_IPV6_NS_OFFLOAD_NA][WMI_MAC_IPV6_ADDR_LEN];
struct qdf_mac_addr self_macaddr;
uint8_t srcIPv6AddrValid;
uint8_t targetIPv6AddrValid[WMI_MAC_NUM_TARGET_IPV6_NS_OFFLOAD_NA];
uint8_t target_ipv6_addr_ac_type[WMI_MAC_NUM_TARGET_IPV6_NS_OFFLOAD_NA];
uint8_t slotIdx;
};
#endif /* WLAN_NS_OFFLOAD */
/**
* struct host_offload_req_param - arp offload parameter
* @offloadType: offload type
* @enableOrDisable: enable or disable
* @num_ns_offload_count: offload count
*/
struct host_offload_req_param {
uint8_t offloadType;
uint8_t enableOrDisable;
uint32_t num_ns_offload_count;
union {
uint8_t hostIpv4Addr[WMI_IPV4_ADDR_LEN];
uint8_t hostIpv6Addr[WMI_MAC_IPV6_ADDR_LEN];
} params;
#ifdef WLAN_NS_OFFLOAD
struct ns_offload_req_params nsOffloadInfo;
#endif /* WLAN_NS_OFFLOAD */
struct qdf_mac_addr bssid;
};
/**
* struct ssid_hotlist_param - param for SSID Hotlist
* @ssid: SSID which is being hotlisted
* @band: Band in which the given SSID should be scanned
* @rssi_low: Low bound on RSSI
* @rssi_high: High bound on RSSI
*/
struct ssid_hotlist_param {
struct mac_ssid ssid;
uint8_t band;
int32_t rssi_low;
int32_t rssi_high;
};
/**
* struct rssi_disallow_bssid - Structure holding Rssi based avoid candidate
* @bssid: BSSID of the AP
* @remaining_duration: remaining disallow duration in ms
* @expected_rssi: RSSI at which STA can initate in dBm
*/
struct rssi_disallow_bssid {
struct qdf_mac_addr bssid;
uint32_t remaining_duration;
int8_t expected_rssi;
};
/**
* struct roam_scan_filter_params - Structure holding roaming scan
* parameters
* @op_bitmap: bitmap to determine reason of roaming
* @session_id: vdev id
* @num_bssid_black_list: The number of BSSID's that we should
* avoid connecting to. It is like a
* blacklist of BSSID's.
* @num_ssid_white_list: The number of SSID profiles that are
* in the Whitelist. When roaming, we
* consider the BSSID's with this SSID
* also for roaming apart from the connected one's
* @num_bssid_preferred_list: Number of BSSID's which have a preference over
* others
* @bssid_avoid_list: Blacklist SSID's
* @ssid_allowed_list: Whitelist SSID's
* @bssid_favored: Favorable BSSID's
* @bssid_favored_factor: RSSI to be added to this BSSID to prefer it
* @lca_disallow_config_present: LCA [Last Connected AP] disallow config present
* @disallow_duration: How long LCA AP will be disallowed before it
* can be a roaming candidate again, in seconds
* @rssi_channel_penalization:How much RSSI will be penalized if candidate(s)
* are found in the same channel as disallowed AP's,
* in units of db
* @num_disallowed_aps: How many APs the target should maintain in its
* LCA list
*
* This structure holds all the key parameters related to
* initial connection and roaming connections.
*/
struct roam_scan_filter_params {
uint32_t op_bitmap;
uint8_t session_id;
uint32_t num_bssid_black_list;
uint32_t num_ssid_white_list;
uint32_t num_bssid_preferred_list;
struct qdf_mac_addr bssid_avoid_list[MAX_BSSID_AVOID_LIST];
struct mac_ssid ssid_allowed_list[MAX_SSID_ALLOWED_LIST];
struct qdf_mac_addr bssid_favored[MAX_BSSID_FAVORED];
uint8_t bssid_favored_factor[MAX_BSSID_FAVORED];
uint8_t lca_disallow_config_present;
uint32_t disallow_duration;
uint32_t rssi_channel_penalization;
uint32_t num_disallowed_aps;
uint32_t num_rssi_rejection_ap;
struct rssi_disallow_bssid rssi_rejection_ap[MAX_RSSI_AVOID_BSSID_LIST];
};
#define WMI_MAX_HLP_IE_LEN 2048
/**
* struct hlp_params - HLP info params
* @vdev_id: vdev id
* @hlp_ie_len: HLP IE length
* @hlp_ie: HLP IE
*/
struct hlp_params {
uint8_t vdev_id;
uint32_t hlp_ie_len;
uint8_t hlp_ie[WMI_MAX_HLP_IE_LEN];
};
/**
* struct ssid_hotlist_request_params - set SSID hotlist request struct
* @request_id: ID of the request
* @session_id: ID of the session
* @lost_ssid_sample_size: Number of consecutive scans in which the SSID
* must not be seen in order to consider the SSID "lost"
* @ssid_count: Number of valid entries in the @ssids array
* @ssids: Array that defines the SSIDs that are in the hotlist
*/
struct ssid_hotlist_request_params {
uint32_t request_id;
uint8_t session_id;
uint32_t lost_ssid_sample_size;
uint32_t ssid_count;
struct ssid_hotlist_param ssids[WMI_EXTSCAN_MAX_HOTLIST_SSIDS];
};
/**
* struct wmi_unit_test_cmd - unit test command parameters
* @vdev_id: vdev id
* @module_id: module id
* @num_args: number of arguments
* @args: arguments
*/
struct wmi_unit_test_cmd {
uint32_t vdev_id;
uint32_t module_id;
uint32_t num_args;
uint32_t args[WMI_MAX_NUM_ARGS];
};
/**
* struct wmi_roam_invoke_cmd - roam invoke command
* @vdev_id: vdev id
* @bssid: mac address
* @channel: channel
* @frame_len: frame length, includs mac header, fixed params and ies
* @frame_buf: buffer contaning probe response or beacon
* @is_same_bssid: flag to indicate if roaming is requested for same bssid
*/
struct wmi_roam_invoke_cmd {
uint32_t vdev_id;
uint8_t bssid[IEEE80211_ADDR_LEN];
uint32_t channel;
uint32_t frame_len;
uint8_t *frame_buf;
uint8_t is_same_bssid;
};
/**
* struct ext_scan_setbssi_hotlist_params - set hotlist request
* @requestId: request identifier
* @sessionId: session identifier
* @lost_ap_sample_size: number of samples to confirm AP loss
* @numAp: Number of hotlist APs
* @ap: hotlist APs
*/
struct ext_scan_setbssi_hotlist_params {
uint32_t requestId;
uint8_t sessionId;
uint32_t lost_ap_sample_size;
uint32_t numAp;
struct ap_threshold_params ap[WMI_WLAN_EXTSCAN_MAX_HOTLIST_APS];
};
/**
* struct TARGET_HAL_REG_CAPABILITIES - This is replication of REG table
* structure defined by target. This is added here to remove dependency
* on FW headers so that host can be agnostic to different defintions in
* both the targets.
*/
typedef struct {
uint32_t eeprom_rd; /* regdomain value specified in EEPROM */
uint32_t eeprom_rd_ext; /* regdomain */
uint32_t regcap1; /* CAP1 capabilities bit map */
uint32_t regcap2; /* REGDMN EEPROM CAP */
uint32_t wireless_modes; /* REGDMN MODE */
uint32_t low_2ghz_chan;
uint32_t high_2ghz_chan;
uint32_t low_5ghz_chan;
uint32_t high_5ghz_chan;
} TARGET_HAL_REG_CAPABILITIES;
/**
* struct host_mem_req - Host memory request paramseters request by target
* @req_id: Request id to identify the request.
* @unit_size: Size of single unit requested.
* @num_unit_info: Memory chunk info
* @num_units: number of units requested.
*/
typedef struct {
uint32_t req_id;
uint32_t unit_size;
uint32_t num_unit_info;
uint32_t num_units;
} host_mem_req;
#define WMI_HOST_DSCP_MAP_MAX (64)
/**
* struct wmi_host_ext_resource_config - Extended resource config
* @host_platform_config: Host plaform configuration.
* @fw_featuew_bitmap: FW feature requested bitmap.
*/
typedef struct {
uint32_t host_platform_config;
#define WMI_HOST_FW_FEATURE_LTEU_SUPPORT 0x0001
#define WMI_HOST_FW_FEATURE_COEX_GPIO_SUPPORT 0x0002
#define WMI_HOST_FW_FEATURE_AUX_RADIO_SPECTRAL_INTF 0x0004
#define WMI_HOST_FW_FEATURE_AUX_RADIO_CHAN_LOAD_INTF 0x0008
#define WMI_HOST_FW_FEATURE_BSS_CHANNEL_INFO_64 0x0010
#define WMI_HOST_FW_FEATURE_PEER_STATS 0x0020
#define WMI_HOST_FW_FEATURE_VDEV_STATS 0x0040
/**
* @brief fw_feature_bitmask - Enable/Disable features in FW
* @details
* The bits in fw_feature_bitmask are used as shown by the masks below:
* 0x0001 - LTEU Config enable/disable
* 0x0002 - COEX GPIO Config enable/disable
* 0x0004 - Aux Radio enhancement for spectral scan enable/disable
* 0x0008 - Aux Radio enhancement for chan load scan enable/disable
* 0x0010 - BSS channel info stats enable/disable
* The features in question are enabled by setting
* the feature's bit to 1,
* or disabled by setting the feature's bit to 0.
*/
uint32_t fw_feature_bitmap;
/* add new members here */
} wmi_host_ext_resource_config;
/**
* struct set_neighbour_rx_params - Neighbour RX params
* @vdev_id: vdev id
* @idx: index of param
* @action: action
* @type: Type of param
*/
struct set_neighbour_rx_params {
uint8_t vdev_id;
uint32_t idx;
uint32_t action;
uint32_t type;
};
/**
* struct set_fwtest_params - FW test params
* @arg: FW param id
* @value: value
*/
struct set_fwtest_params {
uint32_t arg;
uint32_t value;
};
/**
* struct config_ratemask_params - ratemask config parameters
* @vdev_id: vdev id
* @type: Type
* @lower32: Lower 32 bits
* @higher32: Hogher 32 bits
*/
struct config_ratemask_params {
uint8_t vdev_id;
uint8_t type;
uint32_t lower32;
uint32_t higher32;
};
/**
* struct peer_add_wds_entry_params - WDS peer entry add params
* @dest_addr: Pointer to destination macaddr
* @peer_addr: Pointer to peer mac addr
* @flags: flags
*/
struct peer_add_wds_entry_params {
const uint8_t *dest_addr;
uint8_t *peer_addr;
uint32_t flags;
};
/**
* struct peer_del_wds_entry_params - WDS peer entry del params
* @dest_addr: Pointer to destination macaddr
*/
struct peer_del_wds_entry_params {
uint8_t *dest_addr;
};
/**
* struct peer_updatewds_entry_params - WDS peer entry update params
* @wds_macaddr: Pointer to destination macaddr
* @peer_add: Pointer to peer mac addr
* @flags: flags
*/
struct peer_update_wds_entry_params {
uint8_t *wds_macaddr;
uint8_t *peer_macaddr;
uint32_t flags;
};
/**
* struct set_ps_mode_params - PS mode params
* @vdev_id: vdev id
* @psmode: PS mode
*/
struct set_ps_mode_params {
uint8_t vdev_id;
uint8_t psmode;
};
/**
* @struct tt_level_config - Set Thermal throttlling config
* @tmplwm: Temperature low water mark
* @tmphwm: Temperature high water mark
* @dcoffpercent: dc off percentage
* @priority: priority
*/
typedef struct {
uint32_t tmplwm;
uint32_t tmphwm;
uint32_t dcoffpercent;
uint32_t priority;
} tt_level_config;
/**
* struct thermal_mitigation_params - Thermal mitigation params
* @enable: Enable/Disable Thermal mitigation
* @dc: DC
* @dc_per_event: DC per event
* @tt_level_config: TT level config params
*/
struct thermal_mitigation_params {
uint32_t enable;
uint32_t dc;
uint32_t dc_per_event;
tt_level_config levelconf[THERMAL_LEVELS];
};
/**
* struct smart_ant_enable_params - Smart antenna params
* @enable: Enable/Disable
* @mode: SA mode
* @rx_antenna: RX antenna config
* @gpio_pin : GPIO pin config
* @gpio_func : GPIO function config
*/
struct smart_ant_enable_params {
uint32_t enable;
uint32_t mode;
uint32_t rx_antenna;
uint32_t gpio_pin[WMI_HAL_MAX_SANTENNA];
uint32_t gpio_func[WMI_HAL_MAX_SANTENNA];
};
/**
* struct smart_ant_rx_ant_params - RX antenna params
* @antenna: RX antenna
*/
struct smart_ant_rx_ant_params {
uint32_t antenna;
};
/**
* struct smart_ant_tx_ant_params - TX antenna param
* @antenna_array: Antenna arry
* @vdev_id: VDEV id
*/
struct smart_ant_tx_ant_params {
uint32_t *antenna_array;
uint8_t vdev_id;
};
/**
* struct smart_ant_training_info_params - SA training params
* @vdev_id: VDEV id
* @rate_array: Rates array
* @antenna_array: Antenna array
* @numpkts: num packets for training
*/
struct smart_ant_training_info_params {
uint8_t vdev_id;
uint32_t *rate_array;
uint32_t *antenna_array;
uint32_t numpkts;
};
/**
* struct smart_ant_node_config_params - SA node config params
* @vdev_id: VDEV id
* @cmd_id: Command id
* @args_count: Arguments count
*/
struct smart_ant_node_config_params {
uint8_t vdev_id;
uint32_t cmd_id;
uint16_t args_count;
uint32_t *args_arr;
};
/**
* struct smart_ant_enable_tx_feedback_params - SA tx feeback params
* @enable: Enable TX feedback for SA
*/
struct smart_ant_enable_tx_feedback_params {
int enable;
};
/**
* struct vdev_spectral_configure_params - SPectral config params
* @vdev_id: VDEV id
* @count: count
* @period: period
* @spectral_pri: Spectral priority
* @fft_size: FFT size
* @gc_enable: GC enable
* @restart_enable: restart enabled
* @noise_floor_ref: Noise floor reference
* @init_delay: Init delays
* @nb_tone_thr: NB tone threshold
* @str_bin_thr: STR BIN threshold
* @wb_rpt_mode: WB BIN threshold
* @rssi_rpt_mode: RSSI report mode
* @rssi_thr: RSSI threshold
* @pwr_format: Power format
* @rpt_mode: Report mdoe
* @bin_scale: BIN scale
* @dBm_adj: DBM adjust
* @chn_mask: chain mask
*/
struct vdev_spectral_configure_params {
uint8_t vdev_id;
uint16_t count;
uint16_t period;
uint16_t spectral_pri;
uint16_t fft_size;
uint16_t gc_enable;
uint16_t restart_enable;
uint16_t noise_floor_ref;
uint16_t init_delay;
uint16_t nb_tone_thr;
uint16_t str_bin_thr;
uint16_t wb_rpt_mode;
uint16_t rssi_rpt_mode;
uint16_t rssi_thr;
uint16_t pwr_format;
uint16_t rpt_mode;
uint16_t bin_scale;
uint16_t dBm_adj;
uint16_t chn_mask;
};
/**
* struct vdev_spectral_enable_params - Spectral enabled params
* @vdev_id: VDEV id
* @active_valid: Active valid
* @active: active
* @enabled_valid: Enabled valid
* @enabled: enabled
*/
struct vdev_spectral_enable_params {
uint8_t vdev_id;
uint8_t active_valid;
uint8_t active;
uint8_t enabled_valid;
uint8_t enabled;
};
/**
* struct pdev_set_regdomain_params - PDEV set reg domain params
* @currentRDinuse: Current Reg domain
* @currentRD2G: Current Reg domain 2G
* @currentRD5G: Current Reg domain 5G
* @ctl_2G: CTL 2G
* @ctl_5G: CTL 5G
* @dfsDomain: DFS domain
*/
struct pdev_set_regdomain_params {
uint16_t currentRDinuse;
uint16_t currentRD2G;
uint16_t currentRD5G;
uint32_t ctl_2G;
uint32_t ctl_5G;
uint8_t dfsDomain;
};
/**
* struct set_quiet_mode_params - Set quiet mode params
* @enabled: Enabled
* @period: Quite period
* @intval: Quite interval
* @duration: Quite duration
* @offset: offset
*/
struct set_quiet_mode_params {
uint8_t enabled;
uint8_t period;
uint16_t intval;
uint16_t duration;
uint16_t offset;
};
/**
* struct set_beacon_filter_params - Set beacon filter params
* @vdev_id: VDEV id
* @ie: Pointer to IE fields
*/
struct set_beacon_filter_params {
uint8_t vdev_id;
uint32_t *ie;
};
/**
* struct remove_beacon_filter_params - Remove beacon filter params
* @vdev_id: VDEV id
*/
struct remove_beacon_filter_params {
uint8_t vdev_id;
};
/**
* struct mgmt_params - Mgmt params
* @vdev_id: vdev id
* @buf_len: lenght of frame buffer
* @wbuf: frame buffer
*/
struct mgmt_params {
int vdev_id;
uint32_t buf_len;
qdf_nbuf_t wbuf;
};
/**
* struct addba_clearresponse_params - Addba clear response params
* @vdev_id: VDEV id
*/
struct addba_clearresponse_params {
uint8_t vdev_id;
};
/**
* struct addba_send_params - ADDBA send params
* @vdev_id: vdev id
* @tidno: TID
* @buffersize: buffer size
*/
struct addba_send_params {
uint8_t vdev_id;
uint8_t tidno;
uint16_t buffersize;
};
/**
* struct delba_send_params - DELBA send params
* @vdev_id: vdev id
* @tidno: TID
* @initiator: initiator
* @reasoncode: reason code
*/
struct delba_send_params {
uint8_t vdev_id;
uint8_t tidno;
uint8_t initiator;
uint16_t reasoncode;
};
/**
* struct addba_setresponse_arams - Set ADDBA response params
* @vdev_id: vdev id
* @tidno: TID
* @statuscode: status code in response
*/
struct addba_setresponse_params {
uint8_t vdev_id;
uint8_t tidno;
uint16_t statuscode;
};
/**
* struct singleamsdu_params - Single AMSDU params
* @vdev_id: vdev is
* @tidno: TID
*/
struct singleamsdu_params {
uint8_t vdev_id;
uint8_t tidno;
};
/**
* struct set_qbosst_params - Set QBOOST params
* @vdev_id: vdev id
* @value: value
*/
struct set_qboost_params {
uint8_t vdev_id;
uint32_t value;
};
/**
* struct mu_scan_params - MU scan params
* @id: id
* @type: type
* @duration: Duration
* @lteu_tx_power: LTEU tx power
*/
struct mu_scan_params {
uint8_t id;
uint8_t type;
uint32_t duration;
uint32_t lteu_tx_power;
};
/**
* struct lteu_config_params - LTEU config params
* @lteu_gpio_start: start MU/AP scan after GPIO toggle
* @lteu_num_bins: no. of elements in the following arrays
* @use_actual_nf: whether to use the actual NF obtained or a hardcoded one
* @lteu_weight: weights for MU algo
* @lteu_thresh: thresholds for MU algo
* @lteu_gamma: gamma's for MU algo
* @lteu_scan_timeout: timeout in ms to gpio toggle
* @alpha_num_ssid: alpha for num active bssid calculation
* @wifi_tx_power: Wifi Tx power
*/
struct lteu_config_params {
uint8_t lteu_gpio_start;
uint8_t lteu_num_bins;
uint8_t use_actual_nf;
uint32_t lteu_weight[LTEU_MAX_BINS];
uint32_t lteu_thresh[LTEU_MAX_BINS];
uint32_t lteu_gamma[LTEU_MAX_BINS];
uint32_t lteu_scan_timeout;
uint32_t alpha_num_bssid;
uint32_t wifi_tx_power;
};
struct wmi_macaddr_t {
/** upper 4 bytes of MAC address */
uint32_t mac_addr31to0;
/** lower 2 bytes of MAC address */
uint32_t mac_addr47to32;
};
/**
* struct atf_peer_info - ATF peer info params
* @peer_macaddr: peer mac addr
* @percentage_peer: percentage of air time for this peer
*/
typedef struct {
struct wmi_macaddr_t peer_macaddr;
uint32_t percentage_peer;
} atf_peer_info;
/**
* struct bwf_peer_info_t - BWF peer info params
* @peer_macaddr: peer mac addr
* @throughput: Throughput
* @max_airtime: Max airtime
* @priority: Priority level
* @reserved: Reserved array
*/
typedef struct {
struct wmi_macaddr_t peer_macaddr;
uint32_t throughput;
uint32_t max_airtime;
uint32_t priority;
uint32_t reserved[4];
} bwf_peer_info;
/**
* struct set_bwf_params - BWF params
* @num_peers: number of peers
* @atf_peer_info: BWF peer info
*/
struct set_bwf_params {
uint32_t num_peers;
bwf_peer_info peer_info[1];
};
/**
* struct set_atf_params - ATF params
* @num_peers: number of peers
* @atf_peer_info: ATF peer info
*/
struct set_atf_params {
uint32_t num_peers;
atf_peer_info peer_info[ATF_ACTIVED_MAX_CLIENTS];
};
/**
* struct atf_peer_ext_info - ATF peer ext info params
* @peer_macaddr: peer mac address
* @group_index: group index
* @atf_index_reserved: ATF index rsvd
*/
typedef struct {
struct wmi_macaddr_t peer_macaddr;
uint32_t group_index;
uint32_t atf_index_reserved;
} atf_peer_ext_info;
/**
* struct atf_peer_request_params - ATF peer req params
* @num_peers: number of peers
* @atf_peer_ext_info: ATF peer ext info
*/
struct atf_peer_request_params {
uint32_t num_peers;
atf_peer_ext_info peer_ext_info[ATF_ACTIVED_MAX_CLIENTS];
};
/**
* struct atf_group_info - ATF group info params
* @percentage_group: Percentage AT for group
* @atf_group_units_reserved: ATF group information
*/
typedef struct {
uint32_t percentage_group;
uint32_t atf_group_units_reserved;
} atf_group_info;
/**
* struct atf_grouping_params - ATF grouping params
* @num_groups: number of groups
* @group_inf: Group informaition
*/
struct atf_grouping_params {
uint32_t num_groups;
atf_group_info group_info[ATF_ACTIVED_MAX_ATFGROUPS];
};
/**
* struct wlan_profile_params - WLAN profile params
* @param_id: param id
* @profile_id: profile id
* @enable: enable
*/
struct wlan_profile_params {
uint32_t param_id;
uint32_t profile_id;
uint32_t enable;
};
/* struct ht_ie_params - HT IE params
* @ie_len: IE length
* @ie_data: pointer to IE data
*/
struct ht_ie_params {
uint32_t ie_len;
uint8_t *ie_data;
};
/* struct vht_ie_params - VHT IE params
* @ie_len: IE length
* @ie_data: pointer to IE data
*/
struct vht_ie_params {
uint32_t ie_len;
uint8_t *ie_data;
};
/**
* struct wmi_host_wmeParams - WME params
* @wmep_acm: ACM paramete
* @wmep_aifsn: AIFSN parameters
* @wmep_logcwmin: cwmin in exponential form
* @wmep_logcwmax: cwmax in exponential form
* @wmep_txopLimit: txopLimit
* @wmep_noackPolicy: No-Ack Policy: 0=ack, 1=no-ack
*/
struct wmi_host_wmeParams {
u_int8_t wmep_acm;
u_int8_t wmep_aifsn;
u_int8_t wmep_logcwmin;
u_int8_t wmep_logcwmax;
u_int16_t wmep_txopLimit;
u_int8_t wmep_noackPolicy;
};
/**
* struct wmm_update_params - WMM update params
* @wmep_array: WME params for each AC
*/
struct wmm_update_params {
struct wmi_host_wmeParams *wmep_array;
};
/**
* struct ant_switch_tbl_params - Antenna switch table params
* @ant_ctrl_common1: ANtenna control common param 1
* @ant_ctrl_common2: Antenna control commn param 2
*/
struct ant_switch_tbl_params {
uint32_t ant_ctrl_common1;
uint32_t ant_ctrl_common2;
};
/**
* struct ratepwr_table_params - Rate power table params
* @ratepwr_tbl: pointer to rate power table
* @ratepwr_len: rate power table len
*/
struct ratepwr_table_params {
uint8_t *ratepwr_tbl;
uint16_t ratepwr_len;
};
/**
* struct ctl_table_params - Ctl table params
* @ctl_array: pointer to ctl array
* @ctl_len: ctl length
* @is_acfg_ctl: is acfg_ctl table
*/
struct ctl_table_params {
uint8_t *ctl_array;
uint16_t ctl_len;
bool is_acfg_ctl;
};
/**
* struct mimogain_table_params - MIMO gain table params
* @array_gain: pointer to array gain table
* @tbl_len: table length
* @multichain_gain_bypass: bypass multichain gain
*/
struct mimogain_table_params {
uint8_t *array_gain;
uint16_t tbl_len;
bool multichain_gain_bypass;
};
/**
* struct ratepwr_chainmask_params - Rate power chainmask params
* @ratepwr_chain_tbl: pointer to ratepwr chain table
* @num_rate: number of rate in table
* @pream_type: preamble type
* @ops: ops
*/
struct ratepwr_chainmsk_params {
uint32_t *ratepwr_chain_tbl;
uint16_t num_rate;
uint8_t pream_type;
uint8_t ops;
};
struct macaddr_params {
uint8_t *macaddr;
};
/**
* struct acparams_params - acparams config structure
* @ac: AC to configure
* @use_rts: Use rts for this AC
* @aggrsize_scaling: Aggregrate size scaling for the AC
* @min_kbps: min kbps req
*/
struct acparams_params {
uint8_t ac;
uint8_t use_rts;
uint8_t aggrsize_scaling;
uint32_t min_kbps;
};
/**
* struct vap_dscp_tid_map_params - DSCP tid map params
* @vdev_id: vdev id
* @dscp_to_tid_map: pointer to arry of tid to dscp map table
*/
struct vap_dscp_tid_map_params {
uint8_t vdev_id;
uint32_t *dscp_to_tid_map;
};
/**
* struct proxy_ast_reserve_params - Proxy AST reserve params
* @macaddr: macaddr for proxy ast entry
*/
struct proxy_ast_reserve_params {
uint8_t *macaddr;
};
/**
* struct fips_params - FIPS params config
* @key: pointer to key
* @key_len: length of key
* @data: pointer data buf
* @data_len: lenght of sata buf
* @mode: mode
* @op: operation
*/
struct fips_params {
uint8_t *key;
uint32_t key_len;
uint8_t *data;
uint32_t data_len;
uint32_t mode;
uint32_t op;
};
/**
* struct mcast_group_update_param - Mcast group table update to target
* @action: Addition/deletion
* @wildcard: iwldcard table entry?
* @mcast_ip_addr: mcast ip address to be updated
* @mcast_ip_addr_bytes: mcast ip addr bytes
* @ucast_mac_addr: ucast peer mac subscribed to mcast ip
* @filter_mode: filter mode
* @nsrcs: number of entries in source list
* @srcs: source mac accpted
* @mask: mask
* @vap_id: vdev id
* @is_action_delete: is delete
* @is_filter_mode_snoop:
* @is_mcast_addr_len:
*/
struct mcast_group_update_params {
int action;
int wildcard;
uint8_t *mcast_ip_addr;
int mcast_ip_addr_bytes;
uint8_t *ucast_mac_addr;
uint8_t filter_mode;
uint8_t nsrcs;
uint8_t *srcs;
uint8_t *mask;
uint8_t vap_id;
bool is_action_delete;
bool is_filter_mode_snoop;
bool is_mcast_addr_len;
};
/**
* struct periodic_chan_stats_param - periodic channel stats req param
* @stats_period: stats period update
* @enable: enable/disable
*/
struct periodic_chan_stats_params {
uint32_t stats_period;
bool enable;
};
/**
* struct packet_power_info_params - packet power info params
* @rate_flags: rate flags
* @nss: number of spatial streams
* @preamble: preamble
* @hw_rate:
*/
struct packet_power_info_params {
uint16_t rate_flags;
uint16_t nss;
uint16_t preamble;
uint16_t hw_rate;
};
/**
* WMI_GPIO_CONFIG_CMDID
*/
enum {
WMI_HOST_GPIO_PULL_NONE,
WMI_HOST_GPIO_PULL_UP,
WMI_HOST_GPIO_PULL_DOWN,
};
/**
* WMI_GPIO_INTTYPE
*/
enum {
WMI_HOST_GPIO_INTTYPE_DISABLE,
WMI_HOST_GPIO_INTTYPE_RISING_EDGE,
WMI_HOST_GPIO_INTTYPE_FALLING_EDGE,
WMI_HOST_GPIO_INTTYPE_BOTH_EDGE,
WMI_HOST_GPIO_INTTYPE_LEVEL_LOW,
WMI_HOST_GPIO_INTTYPE_LEVEL_HIGH
};
/**
* struct wmi_host_gpio_input_event - GPIO input event structure
* @gpio_num: GPIO number which changed state
*/
typedef struct {
uint32_t gpio_num; /* GPIO number which changed state */
} wmi_host_gpio_input_event;
/**
* struct gpio_config_params - GPIO config params
* @gpio_num: GPIO number to config
* @input: input/output
* @pull_type: pull type
* @intr_mode: int mode
*/
struct gpio_config_params {
uint32_t gpio_num;
uint32_t input;
uint32_t pull_type;
uint32_t intr_mode;
};
/**
* struct gpio_output_params - GPIO output params
* @gpio_num: GPIO number to configure
* @set: set/reset
*/
struct gpio_output_params {
uint32_t gpio_num;
uint32_t set;
};
#define WMI_HOST_RTT_REPORT_CFR 0
#define WMI_HOST_RTT_NO_REPORT_CFR 1
#define WMI_HOST_RTT_AGGREGATE_REPORT_NON_CFR 2
/**
* struct rtt_meas_req_test_params
* @peer: peer mac address
* @req_frame_type: RTT request frame type
* @req_bw: requested bandwidth
* @req_preamble: Preamble
* @req_num_req: num of requests
* @req_report_type: report type
* @num_measurements: number of measurements
* @asap_mode: priority
* @lci_requested: LCI requested
* @loc_civ_requested:
* @channel_param: channel param
* @req_id: requested id
*/
struct rtt_meas_req_test_params {
uint8_t peer[IEEE80211_ADDR_LEN];
int req_frame_type;
int req_bw;
int req_preamble;
int req_num_req;
int req_report_type;
uint32_t num_measurements;
uint32_t asap_mode;
uint32_t lci_requested;
uint32_t loc_civ_requested;
struct channel_param channel;
uint8_t req_id;
};
/**
* struct rtt_meas_req_params - RTT measurement request params
* @req_id: Request id
* @vdev_id: vdev id
* @sta_mac_addr: pointer to station mac address
* @spoof_mac_addr: pointer to spoof mac address
* @is_mode_na: 11NA
* @is_mode_ac: AC
* @is_bw_20: 20
* @is_bw_40: 40
* @is_bw_80: 80
* @num_probe_rqst: number of probe request
* @channel_param: channel param
*/
struct rtt_meas_req_params {
uint8_t req_id;
uint8_t vdev_id;
uint8_t *sta_mac_addr;
uint8_t *spoof_mac_addr;
bool is_mode_na;
bool is_mode_ac;
bool is_bw_20;
bool is_bw_40;
bool is_bw_80;
uint32_t num_probe_rqst;
struct channel_param channel;
};
/**
* struct lci_set_params - LCI params
* @lci_data: pointer to LCI data
* @latitude_unc: latitude
* @latitude_0_12: bits 0 to 1 of latitude
* @latitude_2_33: bits 2 to 33 of latitude
* @longitude_unc: longitude
* @longitude_0_1: bits 0 to 1 of longitude
* @longitude_2_33: bits 2 to 33 of longitude
* @altitude_type: altitude type
* @altitude_unc_0_3: altitude bits 0 - 3
* @altitude_unc_4_5: altitude bits 4 - 5
* @altitude: altitude
* @datum: dataum
* @reg_loc_agmt:
* @reg_loc_dse:
* @dep_sta:
* @version: version
*/
struct lci_set_params {
void *lci_data;
uint8_t latitude_unc:6,
latitude_0_1:2;
uint32_t latitude_2_33;
uint8_t longitude_unc:6,
longitude_0_1:2;
uint32_t longitude_2_33;
uint8_t altitude_type:4,
altitude_unc_0_3:4;
uint32_t altitude_unc_4_5:2,
altitude:30;
uint8_t datum:3,
reg_loc_agmt:1,
reg_loc_dse:1,
dep_sta:1,
version:2;
};
/**
* struct lcr_set_params - LCR params
* @lcr_data: pointer to lcr data
*/
struct lcr_set_params {
void *lcr_data;
};
/**
* struct rtt_keepalive_req_params - RTT keepalive params
* @macaddr: pointer to macaddress
* @req_id: Request id
* @vdev_id: vdev id
* @stop: start/stop
*/
struct rtt_keepalive_req_params {
uint8_t *macaddr;
uint8_t req_id;
uint8_t vdev_id;
bool stop;
};
/**
* struct wmi_host_stats_event - Stats event params
* @stats_id: stats id of type wmi_host_stats_event
* @num_pdev_stats: number of pdev stats event structures 0 or 1
* @num_pdev_ext_stats: number of pdev ext stats event structures
* @num_vdev_stats: number of vdev stats
* @num_peer_stats: number of peer stats event structures 0 or max peers
* @num_bcnflt_stats: number of beacon filter stats
* @num_chan_stats: number of channel stats
*/
typedef struct {
wmi_host_stats_id stats_id;
uint32_t num_pdev_stats;
uint32_t num_pdev_ext_stats;
uint32_t num_vdev_stats;
uint32_t num_peer_stats;
uint32_t num_bcnflt_stats;
uint32_t num_chan_stats;
} wmi_host_stats_event;
/**
* struct wmi_host_peer_extd_stats - peer extd stats event structure
* @peer_macaddr: Peer mac address
* @inactive_time: inactive time in secs
* @peer_chain_rssi: peer rssi
* @rx_duration: RX duration
* @peer_tx_bytes: TX bytes
* @peer_rx_bytes: RX bytes
* @last_tx_rate_code: Tx rate code of last frame
* @last_tx_power: Tx power latest
* @atf_tokens_allocated: atf tokens allocated
* @atf_tokens_utilized: atf tokens utilized
* @reserved: for future use
*/
typedef struct {
wmi_host_mac_addr peer_macaddr;
uint32_t inactive_time;
uint32_t peer_chain_rssi;
uint32_t rx_duration;
uint32_t peer_tx_bytes;
uint32_t peer_rx_bytes;
uint32_t last_tx_rate_code;
uint32_t last_tx_power;
uint32_t atf_tokens_allocated;
uint32_t atf_tokens_utilized;
uint32_t reserved[4];
} wmi_host_peer_extd_stats;
/**
* struct wmi_host_pdev_ext_stats - peer ext stats structure
* @rx_rssi_comb: RX rssi
* @rx_rssi_chain0: RX rssi chain 0
* @rx_rssi_chain1: RX rssi chain 1
* @rx_rssi_chain2: RX rssi chain 2
* @rx_rssi_chain3: RX rssi chain 3
* @rx_mcs: RX MCS array
* @tx_mcs: TX MCS array
* @ack_rssi: Ack rssi
*/
typedef struct {
uint32_t rx_rssi_comb;
uint32_t rx_rssi_chain0;
uint32_t rx_rssi_chain1;
uint32_t rx_rssi_chain2;
uint32_t rx_rssi_chain3;
uint32_t rx_mcs[10];
uint32_t tx_mcs[10];
uint32_t ack_rssi;
} wmi_host_pdev_ext_stats;
/**
* struct wmi_host_dbg_tx_stats - Debug stats
* @comp_queued: Num HTT cookies queued to dispatch list
* @comp_delivered: Num HTT cookies dispatched
* @msdu_enqued: Num MSDU queued to WAL
* @mpdu_enqued: Num MPDU queue to WAL
* @wmm_drop: Num MSDUs dropped by WMM limit
* @local_enqued: Num Local frames queued
* @local_freed: Num Local frames done
* @hw_queued: Num queued to HW
* @hw_reaped: Num PPDU reaped from HW
* @underrun: Num underruns
* @hw_paused: HW Paused.
* @tx_abort: Num PPDUs cleaned up in TX abort
* @mpdus_requed: Num MPDUs requed by SW
* @tx_ko: excessive retries
* @tx_xretry:
* @data_rc: data hw rate code
* @self_triggers: Scheduler self triggers
* @sw_retry_failure: frames dropped due to excessive sw retries
* @illgl_rate_phy_err: illegal rate phy errors
* @pdev_cont_xretry: wal pdev continous xretry
* @pdev_tx_timeout: wal pdev continous xretry
* @pdev_resets: wal pdev resets
* @stateless_tid_alloc_failure: frames dropped due to non-availability of
* stateless TIDs
* @phy_underrun: PhY/BB underrun
* @txop_ovf: MPDU is more than txop limit
* @seq_posted: Number of Sequences posted
* @seq_failed_queueing: Number of Sequences failed queueing
* @seq_completed: Number of Sequences completed
* @seq_restarted: Number of Sequences restarted
* @mu_seq_posted: Number of MU Sequences posted
* @mpdus_sw_flush: Num MPDUs flushed by SW, HWPAUSED, SW TXABORT
* (Reset,channel change)
* @mpdus_hw_filter: Num MPDUs filtered by HW, all filter condition
* (TTL expired)
* @mpdus_truncated: Num MPDUs truncated by PDG (TXOP, TBTT,
* PPDU_duration based on rate, dyn_bw)
* @mpdus_ack_failed: Num MPDUs that was tried but didn't receive ACK or BA
* @mpdus_expired: Num MPDUs that was dropped du to expiry.
* @mc_dropr: Num mc drops
*/
typedef struct {
int32_t comp_queued;
int32_t comp_delivered;
int32_t msdu_enqued;
int32_t mpdu_enqued;
int32_t wmm_drop;
int32_t local_enqued;
int32_t local_freed;
int32_t hw_queued;
int32_t hw_reaped;
int32_t underrun;
uint32_t hw_paused;
int32_t tx_abort;
int32_t mpdus_requed;
uint32_t tx_ko;
uint32_t tx_xretry;
uint32_t data_rc;
uint32_t self_triggers;
uint32_t sw_retry_failure;
uint32_t illgl_rate_phy_err;
uint32_t pdev_cont_xretry;
uint32_t pdev_tx_timeout;
uint32_t pdev_resets;
uint32_t stateless_tid_alloc_failure;
uint32_t phy_underrun;
uint32_t txop_ovf;
uint32_t seq_posted;
uint32_t seq_failed_queueing;
uint32_t seq_completed;
uint32_t seq_restarted;
uint32_t mu_seq_posted;
int32_t mpdus_sw_flush;
int32_t mpdus_hw_filter;
int32_t mpdus_truncated;
int32_t mpdus_ack_failed;
int32_t mpdus_expired;
uint32_t mc_drop;
} wmi_host_dbg_tx_stats;
/**
* struct wmi_host_dbg_rx_stats - RX Debug stats
* @mid_ppdu_route_change: Cnts any change in ring routing mid-ppdu
* @status_rcvd: Total number of statuses processed
* @r0_frags: Extra frags on rings 0
* @r1_frags: Extra frags on rings 1
* @r2_frags: Extra frags on rings 2
* @r3_frags: Extra frags on rings 3
* @htt_msdus: MSDUs delivered to HTT
* @htt_mpdus: MPDUs delivered to HTT
* @loc_msdus: MSDUs delivered to local stack
* @loc_mpdus: MPDUS delivered to local stack
* @oversize_amsdu: AMSDUs that have more MSDUs than the status ring size
* @phy_errs: Number of PHY errors
* @phy_err_drop: Number of PHY errors drops
* @mpdu_errs: Number of mpdu errors - FCS, MIC, ENC etc.
* @pdev_rx_timeout: Number of rx inactivity timeouts
* @rx_ovfl_errs: Number of rx overflow errors.
*/
typedef struct {
int32_t mid_ppdu_route_change;
int32_t status_rcvd;
int32_t r0_frags;
int32_t r1_frags;
int32_t r2_frags;
int32_t r3_frags;
int32_t htt_msdus;
int32_t htt_mpdus;
int32_t loc_msdus;
int32_t loc_mpdus;
int32_t oversize_amsdu;
int32_t phy_errs;
int32_t phy_err_drop;
int32_t mpdu_errs;
uint32_t pdev_rx_timeout;
int32_t rx_ovfl_errs;
} wmi_host_dbg_rx_stats;
/** struct wmi_host_dbg_mem_stats - memory stats
* @iram_free_size: IRAM free size on target
* @dram_free_size: DRAM free size on target
* @sram_free_size: SRAM free size on target
*/
typedef struct {
uint32_t iram_free_size;
uint32_t dram_free_size;
/* Only Non-TLV */
uint32_t sram_free_size;
} wmi_host_dbg_mem_stats;
typedef struct {
/* Only TLV */
int32_t dummy;/* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
} wmi_host_dbg_peer_stats;
/**
* struct wmi_host_dbg_stats - host debug stats
* @tx: TX stats of type wmi_host_dbg_tx_stats
* @rx: RX stats of type wmi_host_dbg_rx_stats
* @mem: Memory stats of type wmi_host_dbg_mem_stats
* @peer: peer stats of type wmi_host_dbg_peer_stats
*/
typedef struct {
wmi_host_dbg_tx_stats tx;
wmi_host_dbg_rx_stats rx;
wmi_host_dbg_mem_stats mem;
wmi_host_dbg_peer_stats peer;
} wmi_host_dbg_stats;
/**
* struct wmi_host_pdev_stats - PDEV stats
* @chan_nf: Channel noise floor
* @tx_frame_count: TX frame count
* @rx_frame_count: RX frame count
* @rx_clear_count: rx clear count
* @cycle_count: cycle count
* @phy_err_count: Phy error count
* @chan_tx_pwr: Channel Tx Power
* @pdev_stats: WAL dbg stats
* @ackRcvBad:
* @rtsBad:
* @rtsGood:
* @fcsBad:
* @noBeacons:
* @mib_int_count:
*/
typedef struct {
int32_t chan_nf;
uint32_t tx_frame_count;
uint32_t rx_frame_count;
uint32_t rx_clear_count;
uint32_t cycle_count;
uint32_t phy_err_count;
uint32_t chan_tx_pwr;
wmi_host_dbg_stats pdev_stats;
uint32_t ackRcvBad;
uint32_t rtsBad;
uint32_t rtsGood;
uint32_t fcsBad;
uint32_t noBeacons;
uint32_t mib_int_count;
} wmi_host_pdev_stats;
/**
* struct wmi_host_snr_info - WMI host Signal to noise ration info
* @bcn_snr: beacon SNR
* @dat_snr: Data frames SNR
*/
typedef struct {
int32_t bcn_snr;
int32_t dat_snr;
} wmi_host_snr_info;
#define WMI_HOST_MAX_TX_RATE_VALUES 10 /*Max Tx Rates */
#define WMI_HOST_MAX_RSSI_VALUES 10 /*Max Rssi values */
/* The WLAN_MAX_AC macro cannot be changed without breaking
* * WMI compatibility.
* * The maximum value of access category
* */
#define WMI_HOST_WLAN_MAX_AC 4
/**
* struct wmi_host_vdev_stats - vdev stats structure
* @vdev_id: unique id identifying the VDEV, generated by the caller
* Rest all Only TLV
* @vdev_snr: wmi_host_snr_info
* @tx_frm_cnt: Total number of packets(per AC) that were successfully
* transmitted (with and without retries,
* including multi-cast, broadcast)
* @rx_frm_cnt: Total number of packets that were successfully received
* (after appropriate filter rules including multi-cast, broadcast)
* @multiple_retry_cnt: The number of MSDU packets and MMPDU frames per AC
* that the 802.11 station successfully transmitted after
* more than one retransmission attempt
* @fail_cnt: Total number packets(per AC) failed to transmit
* @rts_fail_cnt: Total number of RTS/CTS sequence failures for transmission
* of a packet
* @rts_succ_cnt: Total number of RTS/CTS sequence success for transmission
* of a packet
* @rx_err_cnt: The receive error count. HAL will provide the
* RxP FCS error global
* @rx_discard_cnt: The sum of the receive error count and
* dropped-receive-buffer error count (FCS error)
* @ack_fail_cnt: Total number packets failed transmit because of no
* ACK from the remote entity
* @tx_rate_history:History of last ten transmit rate, in units of 500 kbit/sec
* @bcn_rssi_history: History of last ten Beacon rssi of the connected Bss
*/
typedef struct {
uint32_t vdev_id;
/* Rest all Only TLV */
wmi_host_snr_info vdev_snr;
uint32_t tx_frm_cnt[WMI_HOST_WLAN_MAX_AC];
uint32_t rx_frm_cnt;
uint32_t multiple_retry_cnt[WMI_HOST_WLAN_MAX_AC];
uint32_t fail_cnt[WMI_HOST_WLAN_MAX_AC];
uint32_t rts_fail_cnt;
uint32_t rts_succ_cnt;
uint32_t rx_err_cnt;
uint32_t rx_discard_cnt;
uint32_t ack_fail_cnt;
uint32_t tx_rate_history[WMI_HOST_MAX_TX_RATE_VALUES];
uint32_t bcn_rssi_history[WMI_HOST_MAX_RSSI_VALUES];
} wmi_host_vdev_stats;
/**
* struct wmi_host_vdev_extd_stats - VDEV extended stats
* @vdev_id: unique id identifying the VDEV, generated by the caller
* @ppdu_aggr_cnt: No of Aggrs Queued to HW
* @ppdu_noack: No of PPDU's not Acked includes both aggr and nonaggr's
* @mpdu_queued: No of MPDU/Subframes's queued to HW in Aggregates
* @ppdu_nonaggr_cnt: No of NonAggr/MPDU/Subframes's queued to HW
* in Legacy NonAggregates
* @mpdu_sw_requed: No of MPDU/Subframes's SW requeued includes
* both Aggr and NonAggr
* @mpdu_suc_retry: No of MPDU/Subframes's transmitted Successfully
* after Single/mul HW retry
* @mpdu_suc_multitry: No of MPDU/Subframes's transmitted Success
* after Multiple HW retry
* @mpdu_fail_retry: No of MPDU/Subframes's failed transmission
* after Multiple HW retry
* @reserved[13]: for future extensions set to 0x0
*/
typedef struct {
uint32_t vdev_id;
uint32_t ppdu_aggr_cnt;
uint32_t ppdu_noack;
uint32_t mpdu_queued;
uint32_t ppdu_nonaggr_cnt;
uint32_t mpdu_sw_requed;
uint32_t mpdu_suc_retry;
uint32_t mpdu_suc_multitry;
uint32_t mpdu_fail_retry;
uint32_t reserved[13];
} wmi_host_vdev_extd_stats;
/**
* struct wmi_host_peer_stats - peer stats
* @peer_macaddr: peer MAC address
* @peer_rssi: rssi
* @peer_rssi_seq_num: rssi sequence number
* @peer_tx_rate: last tx data rate used for peer
* @peer_rx_rate: last rx data rate used for peer
* @currentper: Current PER
* @retries: Retries happend during transmission
* @txratecount: Maximum Aggregation Size
* @max4msframelen: Max4msframelen of tx rates used
* @totalsubframes: Total no of subframes
* @txbytes: No of bytes transmitted to the client
* @nobuffs[4]: Packet Loss due to buffer overflows
* @excretries[4]: Packet Loss due to excessive retries
* @peer_rssi_changed: how many times peer's RSSI changed by a
* non-negligible amount
*/
typedef struct {
wmi_host_mac_addr peer_macaddr;
uint32_t peer_rssi;
uint32_t peer_rssi_seq_num;
uint32_t peer_tx_rate;
uint32_t peer_rx_rate;
uint32_t currentper;
uint32_t retries;
uint32_t txratecount;
uint32_t max4msframelen;
uint32_t totalsubframes;
uint32_t txbytes;
uint32_t nobuffs[4];
uint32_t excretries[4];
uint32_t peer_rssi_changed;
} wmi_host_peer_stats;
typedef struct {
uint32_t dummy;
} wmi_host_bcnflt_stats;
/**
* struct wmi_host_chan_stats - WMI chan stats
* @chan_mhz: Primary channel freq of the channel for which stats are sent
* @sampling_period_us: Time spent on the channel
* @rx_clear_count: Aggregate duration over a sampling period for
* which channel activity was observed
* @tx_duration_us: Accumalation of the TX PPDU duration over a sampling period
* @rx_duration_us: Accumalation of the RX PPDU duration over a sampling period
*/
typedef struct {
uint32_t chan_mhz;
uint32_t sampling_period_us;
uint32_t rx_clear_count;
uint32_t tx_duration_us;
uint32_t rx_duration_us;
} wmi_host_chan_stats;
#define WMI_EVENT_ID_INVALID 0
/**
* Host based ENUM IDs for events to abstract target enums for event_id
*/
typedef enum {
wmi_service_ready_event_id = 0,
wmi_ready_event_id,
wmi_dbg_msg_event_id,
wmi_scan_event_id,
wmi_echo_event_id,
wmi_update_stats_event_id,
wmi_inst_rssi_stats_event_id,
wmi_vdev_start_resp_event_id,
wmi_vdev_standby_req_event_id,
wmi_vdev_resume_req_event_id,
wmi_vdev_stopped_event_id,
wmi_peer_sta_kickout_event_id,
wmi_host_swba_event_id,
wmi_tbttoffset_update_event_id,
wmi_mgmt_rx_event_id,
wmi_chan_info_event_id,
wmi_phyerr_event_id,
wmi_roam_event_id,
wmi_profile_match,
wmi_debug_print_event_id,
wmi_pdev_qvit_event_id,
wmi_wlan_profile_data_event_id,
wmi_rtt_meas_report_event_id,
wmi_tsf_meas_report_event_id,
wmi_rtt_error_report_event_id,
wmi_rtt_keepalive_event_id,
wmi_oem_cap_event_id,
wmi_oem_meas_report_event_id,
wmi_oem_report_event_id,
wmi_nan_event_id,
wmi_wow_wakeup_host_event_id,
wmi_gtk_offload_status_event_id,
wmi_gtk_rekey_fail_event_id,
wmi_dcs_interference_event_id,
wmi_pdev_tpc_config_event_id,
wmi_csa_handling_event_id,
wmi_gpio_input_event_id,
wmi_peer_ratecode_list_event_id,
wmi_generic_buffer_event_id,
wmi_mcast_buf_release_event_id,
wmi_mcast_list_ageout_event_id,
wmi_vdev_get_keepalive_event_id,
wmi_wds_peer_event_id,
wmi_peer_sta_ps_statechg_event_id,
wmi_pdev_fips_event_id,
wmi_tt_stats_event_id,
wmi_pdev_channel_hopping_event_id,
wmi_pdev_ani_cck_level_event_id,
wmi_pdev_ani_ofdm_level_event_id,
wmi_pdev_reserve_ast_entry_event_id,
wmi_pdev_nfcal_power_event_id,
wmi_pdev_tpc_event_id,
wmi_pdev_get_ast_info_event_id,
wmi_pdev_temperature_event_id,
wmi_pdev_nfcal_power_all_channels_event_id,
wmi_pdev_bss_chan_info_event_id,
wmi_mu_report_event_id,
wmi_pdev_utf_event_id,
wmi_pdev_dump_event_id,
wmi_tx_pause_event_id,
wmi_dfs_radar_event_id,
wmi_pdev_l1ss_track_event_id,
wmi_service_ready_ext_event_id,
wmi_vdev_install_key_complete_event_id,
wmi_vdev_mcc_bcn_intvl_change_req_event_id,
wmi_vdev_tsf_report_event_id,
wmi_peer_info_event_id,
wmi_peer_tx_fail_cnt_thr_event_id,
wmi_peer_estimated_linkspeed_event_id,
wmi_peer_state_event_id,
wmi_offload_bcn_tx_status_event_id,
wmi_offload_prob_resp_tx_status_event_id,
wmi_mgmt_tx_completion_event_id,
wmi_tx_delba_complete_event_id,
wmi_tx_addba_complete_event_id,
wmi_ba_rsp_ssn_event_id,
wmi_aggr_state_trig_event_id,
wmi_roam_synch_event_id,
wmi_roam_synch_frame_event_id,
wmi_p2p_disc_event_id,
wmi_p2p_noa_event_id,
wmi_pdev_resume_event_id,
wmi_do_wow_disable_ack_event_id,
wmi_wow_initial_wakeup_event_id,
wmi_stats_ext_event_id,
wmi_iface_link_stats_event_id,
wmi_peer_link_stats_event_id,
wmi_radio_link_stats_link,
wmi_update_fw_mem_dump_event_id,
wmi_diag_event_id_log_supported_event_id,
wmi_nlo_match_event_id,
wmi_nlo_scan_complete_event_id,
wmi_apfind_event_id,
wmi_passpoint_match_event_id,
wmi_chatter_pc_query_event_id,
wmi_pdev_ftm_intg_event_id,
wmi_wlan_freq_avoid_event_id,
wmi_thermal_mgmt_event_id,
wmi_diag_container_event_id,
wmi_host_auto_shutdown_event_id,
wmi_update_whal_mib_stats_event_id,
wmi_update_vdev_rate_stats_event_id,
wmi_diag_event_id,
wmi_ocb_set_sched_event_id,
wmi_dbg_mesg_flush_complete_event_id,
wmi_rssi_breach_event_id,
wmi_uploadh_event_id,
wmi_captureh_event_id,
wmi_rfkill_state_change_event_id,
wmi_tdls_peer_event_id,
wmi_batch_scan_enabled_event_id,
wmi_batch_scan_result_event_id,
wmi_lpi_result_event_id,
wmi_lpi_status_event_id,
wmi_lpi_handoff_event_id,
wmi_extscan_start_stop_event_id,
wmi_extscan_operation_event_id,
wmi_extscan_table_usage_event_id,
wmi_extscan_cached_results_event_id,
wmi_extscan_wlan_change_results_event_id,
wmi_extscan_hotlist_match_event_id,
wmi_extscan_capabilities_event_id,
wmi_extscan_hotlist_ssid_match_event_id,
wmi_mdns_stats_event_id,
wmi_sap_ofl_add_sta_event_id,
wmi_sap_ofl_del_sta_event_id,
wmi_ocb_set_config_resp_event_id,
wmi_ocb_get_tsf_timer_resp_event_id,
wmi_dcc_get_stats_resp_event_id,
wmi_dcc_update_ndl_resp_event_id,
wmi_dcc_stats_event_id,
wmi_soc_set_hw_mode_resp_event_id,
wmi_soc_hw_mode_transition_event_id,
wmi_soc_set_dual_mac_config_resp_event_id,
wmi_tx_data_traffic_ctrl_event_id,
wmi_update_rcpi_event_id,
wmi_get_arp_stats_req_id,
wmi_sar_get_limits_event_id,
wmi_roam_scan_stats_event_id,
wmi_wlan_sar2_result_event_id,
wmi_events_max,
} wmi_conv_event_id;
#define WMI_UNAVAILABLE_PARAM 0
/**
* Host based ENUM IDs for PDEV params to abstract target enums
*/
typedef enum {
wmi_pdev_param_tx_chain_mask = 0,
wmi_pdev_param_rx_chain_mask,
wmi_pdev_param_txpower_limit2g,
wmi_pdev_param_txpower_limit5g,
wmi_pdev_param_txpower_scale,
wmi_pdev_param_beacon_gen_mode,
wmi_pdev_param_beacon_tx_mode,
wmi_pdev_param_resmgr_offchan_mode,
wmi_pdev_param_protection_mode,
wmi_pdev_param_dynamic_bw,
wmi_pdev_param_non_agg_sw_retry_th,
wmi_pdev_param_agg_sw_retry_th,
wmi_pdev_param_sta_kickout_th,
wmi_pdev_param_ac_aggrsize_scaling,
wmi_pdev_param_ltr_enable,
wmi_pdev_param_ltr_ac_latency_be,
wmi_pdev_param_ltr_ac_latency_bk,
wmi_pdev_param_ltr_ac_latency_vi,
wmi_pdev_param_ltr_ac_latency_vo,
wmi_pdev_param_ltr_ac_latency_timeout,
wmi_pdev_param_ltr_sleep_override,
wmi_pdev_param_ltr_rx_override,
wmi_pdev_param_ltr_tx_activity_timeout,
wmi_pdev_param_l1ss_enable,
wmi_pdev_param_dsleep_enable,
wmi_pdev_param_pcielp_txbuf_flush,
wmi_pdev_param_pcielp_txbuf_watermark,
wmi_pdev_param_pcielp_txbuf_tmo_en,
wmi_pdev_param_pcielp_txbuf_tmo_value,
wmi_pdev_param_pdev_stats_update_period,
wmi_pdev_param_vdev_stats_update_period,
wmi_pdev_param_peer_stats_update_period,
wmi_pdev_param_bcnflt_stats_update_period,
wmi_pdev_param_pmf_qos,
wmi_pdev_param_arp_ac_override,
wmi_pdev_param_dcs,
wmi_pdev_param_ani_enable,
wmi_pdev_param_ani_poll_period,
wmi_pdev_param_ani_listen_period,
wmi_pdev_param_ani_ofdm_level,
wmi_pdev_param_ani_cck_level,
wmi_pdev_param_dyntxchain,
wmi_pdev_param_proxy_sta,
wmi_pdev_param_idle_ps_config,
wmi_pdev_param_power_gating_sleep,
wmi_pdev_param_aggr_burst,
wmi_pdev_param_rx_decap_mode,
wmi_pdev_param_fast_channel_reset,
wmi_pdev_param_burst_dur,
wmi_pdev_param_burst_enable,
wmi_pdev_param_smart_antenna_default_antenna,
wmi_pdev_param_igmpmld_override,
wmi_pdev_param_igmpmld_tid,
wmi_pdev_param_antenna_gain,
wmi_pdev_param_rx_filter,
wmi_pdev_set_mcast_to_ucast_tid,
wmi_pdev_param_proxy_sta_mode,
wmi_pdev_param_set_mcast2ucast_mode,
wmi_pdev_param_set_mcast2ucast_buffer,
wmi_pdev_param_remove_mcast2ucast_buffer,
wmi_pdev_peer_sta_ps_statechg_enable,
wmi_pdev_param_igmpmld_ac_override,
wmi_pdev_param_block_interbss,
wmi_pdev_param_set_disable_reset_cmdid,
wmi_pdev_param_set_msdu_ttl_cmdid,
wmi_pdev_param_set_ppdu_duration_cmdid,
wmi_pdev_param_txbf_sound_period_cmdid,
wmi_pdev_param_set_promisc_mode_cmdid,
wmi_pdev_param_set_burst_mode_cmdid,
wmi_pdev_param_en_stats,
wmi_pdev_param_mu_group_policy,
wmi_pdev_param_noise_detection,
wmi_pdev_param_noise_threshold,
wmi_pdev_param_dpd_enable,
wmi_pdev_param_set_mcast_bcast_echo,
wmi_pdev_param_atf_strict_sch,
wmi_pdev_param_atf_sched_duration,
wmi_pdev_param_ant_plzn,
wmi_pdev_param_mgmt_retry_limit,
wmi_pdev_param_sensitivity_level,
wmi_pdev_param_signed_txpower_2g,
wmi_pdev_param_signed_txpower_5g,
wmi_pdev_param_enable_per_tid_amsdu,
wmi_pdev_param_enable_per_tid_ampdu,
wmi_pdev_param_cca_threshold,
wmi_pdev_param_rts_fixed_rate,
wmi_pdev_param_cal_period,
wmi_pdev_param_pdev_reset,
wmi_pdev_param_wapi_mbssid_offset,
wmi_pdev_param_arp_srcaddr,
wmi_pdev_param_arp_dstaddr,
wmi_pdev_param_txpower_decr_db,
wmi_pdev_param_rx_batchmode,
wmi_pdev_param_packet_aggr_delay,
wmi_pdev_param_atf_obss_noise_sch,
wmi_pdev_param_atf_obss_noise_scaling_factor,
wmi_pdev_param_cust_txpower_scale,
wmi_pdev_param_atf_dynamic_enable,
wmi_pdev_param_atf_ssid_group_policy,
wmi_pdev_param_rfkill_enable,
wmi_pdev_param_hw_rfkill_config,
wmi_pdev_param_low_power_rf_enable,
wmi_pdev_param_l1ss_track,
wmi_pdev_param_hyst_en,
wmi_pdev_param_power_collapse_enable,
wmi_pdev_param_led_sys_state,
wmi_pdev_param_led_enable,
wmi_pdev_param_audio_over_wlan_latency,
wmi_pdev_param_audio_over_wlan_enable,
wmi_pdev_param_whal_mib_stats_update_enable,
wmi_pdev_param_vdev_rate_stats_update_period,
wmi_pdev_param_cts_cbw,
wmi_pdev_param_wnts_config,
wmi_pdev_param_adaptive_early_rx_enable,
wmi_pdev_param_adaptive_early_rx_min_sleep_slop,
wmi_pdev_param_adaptive_early_rx_inc_dec_step,
wmi_pdev_param_early_rx_fix_sleep_slop,
wmi_pdev_param_bmiss_based_adaptive_bto_enable,
wmi_pdev_param_bmiss_bto_min_bcn_timeout,
wmi_pdev_param_bmiss_bto_inc_dec_step,
wmi_pdev_param_bto_fix_bcn_timeout,
wmi_pdev_param_ce_based_adaptive_bto_enable,
wmi_pdev_param_ce_bto_combo_ce_value,
wmi_pdev_param_tx_chain_mask_2g,
wmi_pdev_param_rx_chain_mask_2g,
wmi_pdev_param_tx_chain_mask_5g,
wmi_pdev_param_rx_chain_mask_5g,
wmi_pdev_param_tx_chain_mask_cck,
wmi_pdev_param_tx_chain_mask_1ss,
wmi_pdev_param_max,
} wmi_conv_pdev_params_id;
/**
* Host based ENUM IDs for VDEV params to abstract target enums
*/
typedef enum {
wmi_vdev_param_rts_threshold = 0,
wmi_vdev_param_fragmentation_threshold,
wmi_vdev_param_beacon_interval,
wmi_vdev_param_listen_interval,
wmi_vdev_param_multicast_rate,
wmi_vdev_param_mgmt_tx_rate,
wmi_vdev_param_slot_time,
wmi_vdev_param_preamble,
wmi_vdev_param_swba_time,
wmi_vdev_stats_update_period,
wmi_vdev_pwrsave_ageout_time,
wmi_vdev_host_swba_interval,
wmi_vdev_param_dtim_period,
wmi_vdev_oc_scheduler_air_time_limit,
wmi_vdev_param_wds,
wmi_vdev_param_atim_window,
wmi_vdev_param_bmiss_count_max,
wmi_vdev_param_bmiss_first_bcnt,
wmi_vdev_param_bmiss_final_bcnt,
wmi_vdev_param_feature_wmm,
wmi_vdev_param_chwidth,
wmi_vdev_param_chextoffset,
wmi_vdev_param_disable_htprotection,
wmi_vdev_param_sta_quickkickout,
wmi_vdev_param_mgmt_rate,
wmi_vdev_param_protection_mode,
wmi_vdev_param_fixed_rate,
wmi_vdev_param_sgi,
wmi_vdev_param_ldpc,
wmi_vdev_param_tx_stbc,
wmi_vdev_param_rx_stbc,
wmi_vdev_param_intra_bss_fwd,
wmi_vdev_param_def_keyid,
wmi_vdev_param_nss,
wmi_vdev_param_bcast_data_rate,
wmi_vdev_param_mcast_data_rate,
wmi_vdev_param_mcast_indicate,
wmi_vdev_param_dhcp_indicate,
wmi_vdev_param_unknown_dest_indicate,
wmi_vdev_param_ap_keepalive_min_idle_inactive_time_secs,
wmi_vdev_param_ap_keepalive_max_idle_inactive_time_secs,
wmi_vdev_param_ap_keepalive_max_unresponsive_time_secs,
wmi_vdev_param_ap_enable_nawds,
wmi_vdev_param_mcast2ucast_set,
wmi_vdev_param_enable_rtscts,
wmi_vdev_param_rc_num_retries,
wmi_vdev_param_txbf,
wmi_vdev_param_packet_powersave,
wmi_vdev_param_drop_unencry,
wmi_vdev_param_tx_encap_type,
wmi_vdev_param_ap_detect_out_of_sync_sleeping_sta_time_secs,
wmi_vdev_param_cabq_maxdur,
wmi_vdev_param_mfptest_set,
wmi_vdev_param_rts_fixed_rate,
wmi_vdev_param_vht_sgimask,
wmi_vdev_param_vht80_ratemask,
wmi_vdev_param_early_rx_adjust_enable,
wmi_vdev_param_early_rx_tgt_bmiss_num,
wmi_vdev_param_early_rx_bmiss_sample_cycle,
wmi_vdev_param_early_rx_slop_step,
wmi_vdev_param_early_rx_init_slop,
wmi_vdev_param_early_rx_adjust_pause,
wmi_vdev_param_proxy_sta,
wmi_vdev_param_meru_vc,
wmi_vdev_param_rx_decap_type,
wmi_vdev_param_bw_nss_ratemask,
wmi_vdev_param_sensor_ap,
wmi_vdev_param_beacon_rate,
wmi_vdev_param_dtim_enable_cts,
wmi_vdev_param_sta_kickout,
wmi_vdev_param_tx_pwrlimit,
wmi_vdev_param_snr_num_for_cal,
wmi_vdev_param_roam_fw_offload,
wmi_vdev_param_enable_rmc,
wmi_vdev_param_ibss_max_bcn_lost_ms,
wmi_vdev_param_max_rate,
wmi_vdev_param_early_rx_drift_sample,
wmi_vdev_param_set_ibss_tx_fail_cnt_thr,
wmi_vdev_param_ebt_resync_timeout,
wmi_vdev_param_aggr_trig_event_enable,
wmi_vdev_param_is_ibss_power_save_allowed,
wmi_vdev_param_is_power_collapse_allowed,
wmi_vdev_param_is_awake_on_txrx_enabled,
wmi_vdev_param_inactivity_cnt,
wmi_vdev_param_txsp_end_inactivity_time_ms,
wmi_vdev_param_dtim_policy,
wmi_vdev_param_ibss_ps_warmup_time_secs,
wmi_vdev_param_ibss_ps_1rx_chain_in_atim_window_enable,
wmi_vdev_param_rx_leak_window,
wmi_vdev_param_stats_avg_factor,
wmi_vdev_param_disconnect_th,
wmi_vdev_param_rtscts_rate,
wmi_vdev_param_mcc_rtscts_protection_enable,
wmi_vdev_param_mcc_broadcast_probe_enable,
wmi_vdev_param_capabilities,
wmi_vdev_param_max,
} wmi_conv_vdev_param_id;
/**
* Host based ENUM IDs for service bits to abstract target enums
*/
typedef enum {
wmi_service_beacon_offload = 0,
wmi_service_scan_offload,
wmi_service_roam_offload,
wmi_service_bcn_miss_offload,
wmi_service_sta_pwrsave,
wmi_service_sta_advanced_pwrsave,
wmi_service_ap_uapsd,
wmi_service_ap_dfs,
wmi_service_11ac,
wmi_service_blockack,
wmi_service_phyerr,
wmi_service_bcn_filter,
wmi_service_rtt,
wmi_service_ratectrl,
wmi_service_wow,
wmi_service_ratectrl_cache,
wmi_service_iram_tids,
wmi_service_burst,
wmi_service_smart_antenna_sw_support,
wmi_service_gtk_offload,
wmi_service_scan_sch,
wmi_service_csa_offload,
wmi_service_chatter,
wmi_service_coex_freqavoid,
wmi_service_packet_power_save,
wmi_service_force_fw_hang,
wmi_service_smart_antenna_hw_support,
wmi_service_gpio,
wmi_sta_uapsd_basic_auto_trig,
wmi_sta_uapsd_var_auto_trig,
wmi_service_sta_keep_alive,
wmi_service_tx_encap,
wmi_service_ap_ps_detect_out_of_sync,
wmi_service_early_rx,
wmi_service_enhanced_proxy_sta,
wmi_service_tt,
wmi_service_atf,
wmi_service_peer_caching,
wmi_service_coex_gpio,
wmi_service_aux_spectral_intf,
wmi_service_aux_chan_load_intf,
wmi_service_bss_channel_info_64,
wmi_service_ext_res_cfg_support,
wmi_service_mesh,
wmi_service_restrt_chnl_support,
wmi_service_roam_scan_offload,
wmi_service_arpns_offload,
wmi_service_nlo,
wmi_service_sta_dtim_ps_modulated_dtim,
wmi_service_sta_smps,
wmi_service_fwtest,
wmi_service_sta_wmmac,
wmi_service_tdls,
wmi_service_mcc_bcn_interval_change,
wmi_service_adaptive_ocs,
wmi_service_ba_ssn_support,
wmi_service_filter_ipsec_natkeepalive,
wmi_service_wlan_hb,
wmi_service_lte_ant_share_support,
wmi_service_batch_scan,
wmi_service_qpower,
wmi_service_plmreq,
wmi_service_thermal_mgmt,
wmi_service_rmc,
wmi_service_mhf_offload,
wmi_service_coex_sar,
wmi_service_bcn_txrate_override,
wmi_service_nan,
wmi_service_l1ss_stat,
wmi_service_estimate_linkspeed,
wmi_service_obss_scan,
wmi_service_tdls_offchan,
wmi_service_tdls_uapsd_buffer_sta,
wmi_service_tdls_uapsd_sleep_sta,
wmi_service_ibss_pwrsave,
wmi_service_lpass,
wmi_service_extscan,
wmi_service_d0wow,
wmi_service_hsoffload,
wmi_service_roam_ho_offload,
wmi_service_rx_full_reorder,
wmi_service_dhcp_offload,
wmi_service_sta_rx_ipa_offload_support,
wmi_service_mdns_offload,
wmi_service_sap_auth_offload,
wmi_service_dual_band_simultaneous_support,
wmi_service_ocb,
wmi_service_ap_arpns_offload,
wmi_service_per_band_chainmask_support,
wmi_service_packet_filter_offload,
wmi_service_mgmt_tx_htt,
wmi_service_mgmt_tx_wmi,
wmi_service_ext_msg,
wmi_service_mawc,
wmi_service_peer_stats,
wmi_service_mesh_11s,
wmi_service_periodic_chan_stat_support,
wmi_service_tx_mode_push_only,
wmi_service_tx_mode_push_pull,
wmi_service_tx_mode_dynamic,
wmi_services_max,
} wmi_conv_service_ids;
#define WMI_SERVICE_UNAVAILABLE 0xFFFF
/**
* struct target_capability_info - Target capabilities in service ready
* @phy_capability: PHY capabilities
* @max_frag_entry: Maximum frag entries
* @num_rf_chains: Number of RF chains supported
* @ht_cap_info: HT cap info
* @vht_cap_info: VHT cap info
* @vht_supp_mcs: VHT Supported MCS
* @hw_min_tx_power: HW minimum tx power
* @hw_max_tx_power: HW maximum tx power
* @sys_cap_info: sys capability info
* @min_pkt_size_enable: Enterprise mode short pkt enable
* @max_bcn_ie_size: Max beacon and probe rsp IE offload size
* @max_num_scan_channels: Max scan channels
* @max_supported_macs: max supported MCS
* @wmi_fw_sub_feat_caps: FW sub feature capabilities
* @txrx_chainmask: TXRX chain mask
* @default_dbs_hw_mode_index: DBS hw mode index
* @num_msdu_desc: number of msdu desc
*/
typedef struct {
uint32_t phy_capability;
uint32_t max_frag_entry;
uint32_t num_rf_chains;
uint32_t ht_cap_info;
uint32_t vht_cap_info;
uint32_t vht_supp_mcs;
uint32_t hw_min_tx_power;
uint32_t hw_max_tx_power;
uint32_t sys_cap_info;
uint32_t min_pkt_size_enable;
uint32_t max_bcn_ie_size;
uint32_t max_num_scan_channels;
uint32_t max_supported_macs;
uint32_t wmi_fw_sub_feat_caps;
uint32_t txrx_chainmask;
uint32_t default_dbs_hw_mode_index;
uint32_t num_msdu_desc;
} target_capability_info;
/**
* enum WMI_DBG_PARAM - Debug params
* @WMI_DBGLOG_LOG_LEVEL: Set the loglevel
* @WMI_DBGLOG_VAP_ENABLE: Enable VAP level debug
* @WMI_DBGLOG_VAP_DISABLE: Disable VAP level debug
* @WMI_DBGLOG_MODULE_ENABLE: Enable MODULE level debug
* @WMI_DBGLOG_MODULE_DISABLE: Disable MODULE level debug
* @WMI_DBGLOG_MOD_LOG_LEVEL: Enable MODULE level debug
* @WMI_DBGLOG_TYPE: set type of the debug output
* @WMI_DBGLOG_REPORT_ENABLE: Enable Disable debug
*/
typedef enum {
WMI_DBGLOG_LOG_LEVEL = 0x1,
WMI_DBGLOG_VAP_ENABLE,
WMI_DBGLOG_VAP_DISABLE,
WMI_DBGLOG_MODULE_ENABLE,
WMI_DBGLOG_MODULE_DISABLE,
WMI_DBGLOG_MOD_LOG_LEVEL,
WMI_DBGLOG_TYPE,
WMI_DBGLOG_REPORT_ENABLE
} WMI_DBG_PARAM;
/**
* struct wmi_host_fw_ver - FW version in non-tlv target
* @sw_version: Versin info
* @sw_version_1: Second dword of version
*/
struct wmi_host_fw_ver {
uint32_t sw_version;
uint32_t sw_version_1;
};
/**
* struct wmi_host_fw_abi_ver - FW version in non-tlv target
* @sw_version: Versin info
* @abi_version: ABI version
*/
struct wmi_host_fw_abi_ver {
uint32_t sw_version;
uint32_t abi_version;
};
/**
* struct target_resource_config - Resource config sent from host to target
* abstracted out to include union of both configs
* @num_vdevs: Number vdevs configured
* @num_peers: Number of peers
* @num_active_peers: Number of active peers for peer cache
* @num_offload_peers: Number of offload peers
* @num_offload_reorder_buffs: number of offload reorder buffs
* @num_peer_keys: number of peer keys
* @num_tids: number of tids
* @ast_skid_limit: AST skid limit
* @tx_chain_mask: TX chain mask
* @rx_chain_mask: RX chain mask
* @rx_timeout_pri: RX reorder timeout per AC
* @rx_decap_mode: RX decap mode
* @scan_max_pending_req: Scan mac pending req
* @bmiss_offload_max_vdev: Beacom miss offload max vdevs
* @roam_offload_max_vdev: Roam offload max vdevs
* @roam_offload_max_ap_profiles: roam offload max ap profiles
* @num_mcast_groups: num mcast groups
* @num_mcast_table_elems: number of macst table elems
* @mcast2ucast_mode: mcast enhance mode
* @tx_dbg_log_size: DBG log buf size
* @num_wds_entries: number of WDS entries
* @dma_burst_size: DMA burst size.
* @mac_aggr_delim: Mac aggr delim
* @rx_skip_defrag_timeout_dup_detection_check: Defrag dup check in host?
* @vow_config: vow configuration
* @gtk_offload_max_vdev: Max vdevs for GTK offload
* @num_msdu_desc: Number of msdu desc
* @max_frag_entries: Max frag entries
* End common
* @max_peer_ext_stats: Max peer EXT stats
* @smart_ant_cap: Smart antenna capabilities
* @BK_Minfree: BIN configuration for BK traffic
* @BE_Minfree: BIN configuration for BE traffic
* @VI_Minfree: BIN configuration for VI traffic
* @VO_Minfree: BIN configuration for VO traffic
* @rx_batchmode: RX batch mode
* @tt_support: Thermal throttling support
* @atf_config: ATF config
* @iphdr_pad_config: ipheader pad config
* @qwrap_config: Qwrap configuration
* @alloc_frag_desc_for_data_pkt: Frag desc for data
* Added in MCL
* @num_tdls_vdevs:
* @num_tdls_conn_table_entries:
* @beacon_tx_offload_max_vdev:
* @num_multicast_filter_entries:
* @num_wow_filters:
* @num_keep_alive_pattern:
* @keep_alive_pattern_size:
* @max_tdls_concurrent_sleep_sta:
* @max_tdls_concurrent_buffer_sta:
* @wmi_send_separate:
* @num_ocb_vdevs:
* @num_ocb_channels:
* @num_ocb_schedules:
*/
typedef struct {
uint32_t num_vdevs;
uint32_t num_peers;
uint32_t num_active_peers;
uint32_t num_offload_peers;
uint32_t num_offload_reorder_buffs;
uint32_t num_peer_keys;
uint32_t num_tids;
uint32_t ast_skid_limit;
uint32_t tx_chain_mask;
uint32_t rx_chain_mask;
uint32_t rx_timeout_pri[4];
uint32_t rx_decap_mode;
uint32_t scan_max_pending_req;
uint32_t bmiss_offload_max_vdev;
uint32_t roam_offload_max_vdev;
uint32_t roam_offload_max_ap_profiles;
uint32_t num_mcast_groups;
uint32_t num_mcast_table_elems;
uint32_t mcast2ucast_mode;
uint32_t tx_dbg_log_size;
uint32_t num_wds_entries;
uint32_t dma_burst_size;
uint32_t mac_aggr_delim;
uint32_t rx_skip_defrag_timeout_dup_detection_check;
uint32_t vow_config;
uint32_t gtk_offload_max_vdev;
uint32_t num_msdu_desc; /* Number of msdu desc */
uint32_t max_frag_entries;
/* End common */
/* Added for Beeliner */
uint32_t max_peer_ext_stats;
uint32_t smart_ant_cap;
uint32_t BK_Minfree;
uint32_t BE_Minfree;
uint32_t VI_Minfree;
uint32_t VO_Minfree;
uint32_t rx_batchmode;
uint32_t tt_support;
uint32_t atf_config;
uint32_t iphdr_pad_config;
uint32_t
qwrap_config:16,
alloc_frag_desc_for_data_pkt:16;
/* Added in MCL */
uint32_t num_tdls_vdevs;
uint32_t num_tdls_conn_table_entries;
uint32_t beacon_tx_offload_max_vdev;
uint32_t num_multicast_filter_entries;
uint32_t num_wow_filters;
uint32_t num_keep_alive_pattern;
uint32_t keep_alive_pattern_size;
uint32_t max_tdls_concurrent_sleep_sta;
uint32_t max_tdls_concurrent_buffer_sta;
uint32_t wmi_send_separate;
uint32_t num_ocb_vdevs;
uint32_t num_ocb_channels;
uint32_t num_ocb_schedules;
} target_resource_config;
/**
* struct wds_addr_event - WDS addr event structure
* @event_type: event type add/delete
* @peer_mac: peer mac
* @dest_mac: destination mac address
*/
typedef struct {
uint32_t event_type[4];
u_int8_t peer_mac[IEEE80211_ADDR_LEN];
u_int8_t dest_mac[IEEE80211_ADDR_LEN];
} wds_addr_event_t;
/**
* Enum replicated for host abstraction with FW
*/
typedef enum {
/* Event respose of START CMD */
WMI_HOST_VDEV_START_RESP_EVENT = 0,
/* Event respose of RESTART CMD */
WMI_HOST_VDEV_RESTART_RESP_EVENT,
} WMI_HOST_START_EVENT_PARAM;
/**
* struct wmi_host_vdev_start_resp - VDEV start response
* @vdev_id: vdev id
* @requestor_id: requestor id that requested the VDEV start request
* @resp_type: Respose of Event type START/RESTART
* @status: status of the response
* @chain_mask: Vdev chain mask
* @smps_mode: Vdev mimo power save mode
* @mac_id: mac_id field contains the MAC identifier that the
* VDEV is bound to. The valid range is 0 to (num_macs-1).
* @cfgd_tx_streams: Configured Transmit Streams
* @cfgd_rx_streams: Configured Receive Streams
*/
typedef struct {
uint32_t vdev_id;
uint32_t requestor_id;
WMI_HOST_START_EVENT_PARAM resp_type;
uint32_t status;
uint32_t chain_mask;
uint32_t smps_mode;
uint32_t mac_id;
uint32_t cfgd_tx_streams;
uint32_t cfgd_rx_streams;
} wmi_host_vdev_start_resp;
#define WMI_HOST_ATH_MAX_ANTENNA 4
/**
* struct wmi_host_mgmt_rx_hdr - host mgmt header params
* @channel: channel on which this frame is received
* @snr: snr information used to cal rssi
* @rssi_ctl[WMI_HOST_ATH_MAX_ANTENNA]: RSSI of PRI 20MHz for each chain.
* @rate: Rate kbps
* @phy_mode: rx phy mode WLAN_PHY_MODE
* @buf_len: length of the frame
* @status: rx status
* @flags: information about the management frame e.g. can give a
* scan source for a scan result mgmt frame
* @rssi: combined RSSI, i.e. the sum of the snr + noise floor (dBm units)
* @tsf_delta:
*/
typedef struct {
uint32_t channel;
uint32_t snr;
uint8_t rssi_ctl[WMI_HOST_ATH_MAX_ANTENNA];
uint32_t rate;
uint32_t phy_mode;
uint32_t buf_len;
uint32_t status;
uint32_t flags;
int32_t rssi;
uint32_t tsf_delta;
} wmi_host_mgmt_rx_hdr;
/**
* struct wmi_host_roam_event - host roam event param
* @vdev_id: vdev id
* @reason: roam reason
* @rssi: RSSI
*/
typedef struct {
uint32_t vdev_id;
uint32_t reason;
uint32_t rssi;
} wmi_host_roam_event;
/**
* ENUM wmi_host_scan_event_type - Scan event type
*/
enum wmi_host_scan_event_type {
WMI_HOST_SCAN_EVENT_STARTED = 0x1,
WMI_HOST_SCAN_EVENT_COMPLETED = 0x2,
WMI_HOST_SCAN_EVENT_BSS_CHANNEL = 0x4,
WMI_HOST_SCAN_EVENT_FOREIGN_CHANNEL = 0x8,
WMI_HOST_SCAN_EVENT_DEQUEUED = 0x10,
WMI_HOST_SCAN_EVENT_PREEMPTED = 0x20,
WMI_HOST_SCAN_EVENT_START_FAILED = 0x40,
WMI_HOST_SCAN_EVENT_RESTARTED = 0x80,
WMI_HOST_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = 0x100,
WMI_HOST_SCAN_EVENT_INVALID = 0x200,
WMI_HOST_SCAN_EVENT_MAX = 0x8000
};
/**
* ENUM wmi_host_scan_completion_reason - Scan completion event type
*/
enum wmi_host_scan_completion_reason {
/** scan related events */
WMI_HOST_SCAN_REASON_NONE = 0xFF,
WMI_HOST_SCAN_REASON_COMPLETED = 0,
WMI_HOST_SCAN_REASON_CANCELLED = 1,
WMI_HOST_SCAN_REASON_PREEMPTED = 2,
WMI_HOST_SCAN_REASON_TIMEDOUT = 3,
WMI_HOST_SCAN_REASON_INTERNAL_FAILURE = 4,
WMI_HOST_SCAN_REASON_MAX,
};
/**
* struct wmi_host_scan_event - Scan event response from target
* @event: event type
* @reason: Reason for event
* @channel_freq: channel frequency
* @requestor: requestor id
* @scan_id: scan id
* @vdev_id: vdev id
*/
typedef struct {
uint32_t event;
uint32_t reason;
uint32_t channel_freq;
uint32_t requestor;
uint32_t scan_id;
uint32_t vdev_id;
} wmi_host_scan_event;
/**
* struct wmi_host_pdev_reserve_ast_entry_event - Reserve AST entry
* @result: result
*/
typedef struct {
uint32_t result;
} wmi_host_pdev_reserve_ast_entry_event;
/**
* struct wmi_host_mcast_ageout_entry - mcast aged-out entry
* @grp_addr: IPv4/6 mcast group addr
* @vdev_id: vdev id
*/
typedef struct {
uint8_t grp_addr[16];
uint32_t vdev_id;
} wmi_host_mcast_ageout_entry;
/**
* struct wmi_host_mcast_list_ageout_event - List of mcast entry aged-out
* @num_entry: Number of mcast entries timed-out
* @entry: List of wmi_host_mcast_ageout_entry
*/
typedef struct {
uint32_t num_entry;
wmi_host_mcast_ageout_entry entry[1];
} wmi_host_mcast_list_ageout_event;
/**
* struct wmi_host_pdev_nfcal_power_all_channels_event - NF cal event data
* @nfdBr:
* chan0: {NFCalPower_chain0, NFCalPower_chain1,
* NFCalPower_chain2, NFCalPower_chain3},
* chan1: {NFCalPower_chain0, NFCalPower_chain1,
* NFCalPower_chain2, NFCalPower_chain3},
* chan2: {NFCalPower_chain0, NFCalPower_chain1,
* NFCalPower_chain2, NFCalPower_chain3},
* chan3: {NFCalPower_chain0, NFCalPower_chain1,
* NFCalPower_chain2, NFCalPower_chain3},
* @nfdBr:
* chan0: {NFCalPower_chain0, NFCalPower_chain1,
* NFCalPower_chain2, NFCalPower_chain3},
* chan1: {NFCalPower_chain0, NFCalPower_chain1,
* NFCalPower_chain2, NFCalPower_chain3},
* chan2: {NFCalPower_chain0, NFCalPower_chain1,
* NFCalPower_chain2, NFCalPower_chain3},
* chan3: {NFCalPower_chain0, NFCalPower_chain1,
* NFCalPower_chain2, NFCalPower_chain3},
* @freqNum: frequency number
*/
typedef struct {
int8_t nfdBr[WMI_HOST_RXG_CAL_CHAN_MAX * WMI_HOST_MAX_NUM_CHAINS];
int8_t nfdBm[WMI_HOST_RXG_CAL_CHAN_MAX * WMI_HOST_MAX_NUM_CHAINS];
uint32_t freqNum[WMI_HOST_RXG_CAL_CHAN_MAX];
} wmi_host_pdev_nfcal_power_all_channels_event;
/**
* struct wmi_host_pdev_tpc_event - WMI host pdev TPC event
* @tpc:
*/
typedef struct {
uint32_t tpc[1];
} wmi_host_pdev_tpc_event;
/**
* struct wmi_host_pdev_generic_buffer_event
* @buf_type: Buffer type
* @frag_id: Frag id
* @more_frag: more frags pending
* @buf_len: buffer length
* @buf_info: variable length buffer
*/
typedef struct {
uint32_t buf_type;
uint32_t frag_id;
uint32_t more_frag;
uint32_t buf_len;
uint32_t buf_info[1];
} wmi_host_pdev_generic_buffer_event;
/**
* Enum for host buffer event
*/
enum {
WMI_HOST_BUFFER_TYPE_RATEPWR_TABLE,
WMI_HOST_BUFFER_TYPE_CTL_TABLE,
};
/**
* struct wmi_host_pdev_tpc_config_event - host pdev tpc config event
* @regDomain:
* @chanFreq:
* @phyMode:
* @twiceAntennaReduction:
* @twiceMaxRDPower:
* @twiceAntennaGain:
* @powerLimit:
* @rateMax:
* @numTxChain:
* @ctl:
* @flags:
* @maxRegAllowedPower:
* @maxRegAllowedPowerAGCDD:
* @maxRegAllowedPowerAGSTBC:
* @maxRegAllowedPowerAGTXBF:
* @ratesArray:
*/
typedef struct {
uint32_t regDomain;
uint32_t chanFreq;
uint32_t phyMode;
uint32_t twiceAntennaReduction;
uint32_t twiceMaxRDPower;
int32_t twiceAntennaGain;
uint32_t powerLimit;
uint32_t rateMax;
uint32_t numTxChain;
uint32_t ctl;
uint32_t flags;
int8_t maxRegAllowedPower[WMI_HOST_TPC_TX_NUM_CHAIN];
int8_t maxRegAllowedPowerAGCDD[WMI_HOST_TPC_TX_NUM_CHAIN][WMI_HOST_TPC_TX_NUM_CHAIN];
int8_t maxRegAllowedPowerAGSTBC[WMI_HOST_TPC_TX_NUM_CHAIN][WMI_HOST_TPC_TX_NUM_CHAIN];
int8_t maxRegAllowedPowerAGTXBF[WMI_HOST_TPC_TX_NUM_CHAIN][WMI_HOST_TPC_TX_NUM_CHAIN];
uint8_t ratesArray[WMI_HOST_TPC_RATE_MAX];
} wmi_host_pdev_tpc_config_event;
/**
* Enums for TPC event
*/
typedef enum {
WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1,
WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2,
WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4,
} WMI_HOST_TPC_CONFIG_EVENT_FLAG;
/**
* Medium Utilization evaluation algorithms
* These algorithms can be complementary rather than exclusive.
*/
typedef enum {
WMI_HOST_MU_BASIC_ALGO = 0x1,
WMI_HOST_MU_PER_BSSID_ALGO = 0x2,
WMI_HOST_MU_HIDDEN_NODE_ALGO = 0x4,
} WMI_HOST_MU_ALGO_TYPE;
/* max MU alg combinations supported by target */
#define WMI_HOST_MU_MAX_ALGO_TYPE 3
/**
* struct wmi_host_mu_report_event - WMI_MU_REPORT_EVENTID
* @mu_request_id: request id
* @status_reason: MU_STATUS_REASON
* @total_mu: MU_ALG_TYPE combinations
* @num_active_bssid: number of active bssid
*/
typedef struct {
uint32_t mu_request_id;
uint32_t status_reason;
uint32_t total_mu[WMI_HOST_MU_MAX_ALGO_TYPE];
uint32_t num_active_bssid;
} wmi_host_mu_report_event;
/**
* struct wmi_host_mgmt_tx_compl_event - TX completion event
* @desc_id: from tx_send_cmd
* @status: WMI_MGMT_TX_COMP_STATUS_TYPE
*/
typedef struct {
uint32_t desc_id;
uint32_t status;
} wmi_host_mgmt_tx_compl_event;
#define WMI_HOST_TIM_BITMAP_ARRAY_SIZE 17
/**
* struct wmi_host_tim_info - TIM info in SWBA event
* @tim_len: TIM length
* @tim_mcast:
* @tim_bitmap: TIM bitmap
* @tim_changed: TIM changed
* @tim_num_ps_pending: TIM num PS sta pending
*/
typedef struct {
uint32_t tim_len;
uint32_t tim_mcast;
uint32_t tim_bitmap[WMI_HOST_TIM_BITMAP_ARRAY_SIZE];
uint32_t tim_changed;
uint32_t tim_num_ps_pending;
} wmi_host_tim_info;
/**
* struct wmi_host_p2p_noa_descriptor - NoA desc in SWBA event
* @type_count: Absence count
* @duration: NoA duration
* @interval: NoA interval
* @start_time: start time
*/
typedef struct {
uint32_t type_count;
uint32_t duration;
uint32_t interval;
uint32_t start_time;
} wmi_host_p2p_noa_descriptor;
/* Maximum number of NOA Descriptors supported */
#define WMI_HOST_P2P_MAX_NOA_DESCRIPTORS 4
/**
* struct wmi_host_p2p_noa_info - p2p noa information
* @modified: NoA modified
* @index: Index
* @oppPS: Oppurtunstic ps
* @ctwindow: CT window
* @num_descriptors: number of descriptors
* @noa_descriptors: noa descriptors
*/
typedef struct {
uint8_t modified;
uint8_t index;
uint8_t oppPS;
uint8_t ctwindow;
uint8_t num_descriptors;
wmi_host_p2p_noa_descriptor
noa_descriptors[WMI_HOST_P2P_MAX_NOA_DESCRIPTORS];
} wmi_host_p2p_noa_info;
/**
* struct wmi_host_peer_sta_kickout_event
* @peer_macaddr: peer mac address
* @reason: kickout reason
* @rssi: rssi
*/
typedef struct {
uint8_t peer_macaddr[IEEE80211_ADDR_LEN];
uint32_t reason;
uint32_t rssi;
} wmi_host_peer_sta_kickout_event;
/**
* struct wmi_host_peer_sta_ps_statechange_event - ST ps state change event
* @peer_macaddr: peer mac address
* @peer_ps_stats: peer PS state
*/
typedef struct {
uint8_t peer_macaddr[IEEE80211_ADDR_LEN];
uint32_t peer_ps_state;
} wmi_host_peer_sta_ps_statechange_event;
/* Maximum CCK, OFDM rates supported */
#define WMI_SA_MAX_CCK_OFDM_RATES 12
/* Maximum MCS rates supported; 4 rates in each dword */
#define WMI_SA_MAX_MCS_RATES 40
#define WMI_SA_MAX_RATE_COUNTERS 4
/* Maximum rate series used for transmission */
#define SA_MAX_RATE_SERIES 2
#define SA_MAX_LEGACY_RATE_DWORDS 3
#define SA_MAX_HT_RATE_DWORDS 10
#define SA_BYTES_IN_DWORD 4
#define SA_MASK_BYTE 0xff
/* TODO: ratecode_160 needs to add for future chips */
/**
* struct wmi_sa_rate_cap - smart antenna rat capabilities
* @ratecode_legacy: Rate code array for CCK OFDM
* @ratecode_20: Rate code array for 20MHz BW
* @ratecode_40: Rate code array for 40MHz BW
* @ratecode_80: Rate code array for 80MHz BW
* @ratecount: Max Rate count for each mode
*/
typedef struct {
uint8_t ratecode_legacy[WMI_SA_MAX_CCK_OFDM_RATES];
uint8_t ratecode_20[WMI_SA_MAX_MCS_RATES];
uint8_t ratecode_40[WMI_SA_MAX_MCS_RATES];
uint8_t ratecode_80[WMI_SA_MAX_MCS_RATES];
uint8_t ratecount[WMI_SA_MAX_RATE_COUNTERS];
} wmi_sa_rate_cap;
/** Preamble types to be used with VDEV fixed rate configuration */
typedef enum {
WMI_HOST_RATE_PREAMBLE_OFDM,
WMI_HOST_RATE_PREAMBLE_CCK,
WMI_HOST_RATE_PREAMBLE_HT,
WMI_HOST_RATE_PREAMBLE_VHT,
} WMI_HOST_RATE_PREAMBLE;
#define WMI_HOST_FIXED_RATE_NONE (0xff)
/** slot time long */
#define WMI_HOST_VDEV_SLOT_TIME_LONG 0x1
/** slot time short */
#define WMI_HOST_VDEV_SLOT_TIME_SHORT 0x2
/** preablbe long */
#define WMI_HOST_VDEV_PREAMBLE_LONG 0x1
/** preablbe short */
#define WMI_HOST_VDEV_PREAMBLE_SHORT 0x2
/** found a better AP */
#define WMI_HOST_ROAM_REASON_BETTER_AP 0x1
/** beacon miss detected */
#define WMI_HOST_ROAM_REASON_BMISS 0x2
/** deauth/disassoc received */
#define WMI_HOST_ROAM_REASON_DEAUTH 0x2
/** connected AP's low rssi condition detected */
#define WMI_HOST_ROAM_REASON_LOW_RSSI 0x3
/** found another AP that matches SSID and Security profile in
* WMI_ROAM_AP_PROFILE, found during scan triggered upon FINAL_BMISS
*/
#define WMI_HOST_ROAM_REASON_SUITABLE_AP 0x4
/** LFR3.0 roaming failed, indicate the disconnection to host */
#define WMI_HOST_ROAM_REASON_HO_FAILED 0x5
/** values for vdev_type */
#define WMI_HOST_VDEV_TYPE_AP 0x1
#define WMI_HOST_VDEV_TYPE_STA 0x2
#define WMI_HOST_VDEV_TYPE_IBSS 0x3
#define WMI_HOST_VDEV_TYPE_MONITOR 0x4
/** values for vdev_subtype */
#define WMI_HOST_VDEV_SUBTYPE_P2P_DEVICE 0x1
#define WMI_HOST_VDEV_SUBTYPE_P2P_CLIENT 0x2
#define WMI_HOST_VDEV_SUBTYPE_P2P_GO 0x3
#define WMI_HOST_VDEV_SUBTYPE_PROXY_STA 0x4
#define WMI_HOST_VDEV_SUBTYPE_MESH 0x5
#define WMI_HOST_MGMT_TID 17
/* Disable aging & learning */
#define WMI_HOST_WDS_FLAG_STATIC 0x1
/**
* Peer param enum abstracted from target
*/
typedef enum {
/** mimo powersave state */
WMI_HOST_PEER_MIMO_PS_STATE = 0x1,
/** enable/disable AMPDU . initial value (enabled) */
WMI_HOST_PEER_AMPDU = 0x2,
/** authorize/unauthorize peer. initial value is unauthorized (0) */
WMI_HOST_PEER_AUTHORIZE = 0x3,
/** peer channel bandwidth */
WMI_HOST_PEER_CHWIDTH = 0x4,
/** peer NSS */
WMI_HOST_PEER_NSS = 0x5,
/** USE 4 ADDR */
WMI_HOST_PEER_USE_4ADDR = 0x6,
/** Enable extended peer stats */
WMI_HOST_PEER_EXT_STATS_ENABLE = 0x7,
/*Use FIXED Pwr */
WMI_HOST_PEER_USE_FIXED_PWR = 0x8,
/* Set peer fixed rate */
WMI_HOST_PEER_PARAM_FIXED_RATE = 0x9,
/* Whitelist peer TIDs */
WMI_HOST_PEER_SET_MU_WHITELIST = 0xa,
/* set group membership status */
WMI_HOST_PEER_MEMBERSHIP = 0xb,
WMI_HOST_PEER_USERPOS = 0xc,
} PEER_PARAM_ENUM;
#define WMI_HOST_PEER_MIMO_PS_NONE 0x0
#define WMI_HOST_PEER_MIMO_PS_STATIC 0x1
#define WMI_HOST_PEER_MIMO_PS_DYNAMIC 0x2
typedef enum {
HOST_PLATFORM_HIGH_PERF,
HOST_PLATFORM_LOW_PERF,
} HOST_PLATFORM_TYPE;
enum wmi_host_sta_ps_mode {
/** enable power save for the given STA VDEV */
WMI_HOST_STA_PS_MODE_DISABLED = 0,
/** disable power save for a given STA VDEV */
WMI_HOST_STA_PS_MODE_ENABLED = 1,
};
enum wmi_host_sta_powersave_param {
/**
* Controls how frames are retrievd from AP while STA is sleeping
*
* (see enum wmi_sta_ps_param_rx_wake_policy)
*/
WMI_HOST_STA_PS_PARAM_RX_WAKE_POLICY = 0,
/**
* The STA will go active after this many TX
*
* (see enum wmi_sta_ps_param_tx_wake_threshold)
*/
WMI_HOST_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
/**
* Number of PS-Poll to send before STA wakes up
*
* (see enum wmi_sta_ps_param_pspoll_count)
*
*/
WMI_HOST_STA_PS_PARAM_PSPOLL_COUNT = 2,
/**
* TX/RX inactivity time in msec before going to sleep.
*
* The power save SM will monitor tx/rx activity on the VDEV, if no
* activity for the specified msec of the parameter
* the Power save SM will go to sleep.
*/
WMI_HOST_STA_PS_PARAM_INACTIVITY_TIME = 3,
/**
* Set uapsd configuration.
*
* (see enum wmi_sta_ps_param_uapsd)
*/
WMI_HOST_STA_PS_PARAM_UAPSD = 4,
};
/* prefix used by scan requestor ids on the host
* replicated here form wmi_unified.h*/
#define WMI_HOST_P_SCAN_REQUESTOR_ID_PREFIX 0xA000
/* prefix used by scan request ids generated on the host */
/* host cycles through the lower 12 bits to generate ids */
#define WMI_HOST_P_SCAN_REQ_ID_PREFIX 0xA000
#define WMI_HOST_RC_DS_FLAG 0x01 /* Dual stream flag */
#define WMI_HOST_RC_CW40_FLAG 0x02 /* CW 40 */
#define WMI_HOST_RC_SGI_FLAG 0x04 /* Short Guard Interval */
#define WMI_HOST_RC_HT_FLAG 0x08 /* HT */
#define WMI_HOST_RC_RTSCTS_FLAG 0x10 /* RTS-CTS */
#define WMI_HOST_RC_TX_STBC_FLAG 0x20 /* TX STBC */
#define WMI_HOST_RC_RX_STBC_FLAG 0xC0 /* RX STBC ,2 bits */
#define WMI_HOST_RC_RX_STBC_FLAG_S 6 /* RX STBC ,2 bits */
#define WMI_HOST_RC_WEP_TKIP_FLAG 0x100 /* WEP/TKIP encryption */
#define WMI_HOST_RC_TS_FLAG 0x200 /* Three stream flag */
#define WMI_HOST_RC_UAPSD_FLAG 0x400 /* UAPSD Rate Control */
/** HT Capabilities*/
#define WMI_HOST_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */
/* Short Guard Interval with HT20 */
#define WMI_HOST_HT_CAP_HT20_SGI 0x0002
#define WMI_HOST_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */
#define WMI_HOST_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */
#define WMI_HOST_HT_CAP_TX_STBC_MASK_SHIFT 3
#define WMI_HOST_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */
#define WMI_HOST_HT_CAP_RX_STBC_MASK_SHIFT 4
#define WMI_HOST_HT_CAP_LDPC 0x0040 /* LDPC supported */
#define WMI_HOST_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */
#define WMI_HOST_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */
#define WMI_HOST_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
#define WMI_HOST_HT_CAP_HT40_SGI 0x0800
#define WMI_HOST_HT_CAP_IBF_BFER 0x1000
/* These macros should be used when we wish to advertise STBC support for
* only 1SS or 2SS or 3SS. */
#define WMI_HOST_HT_CAP_RX_STBC_1SS 0x0010 /* B4-B5 RX STBC */
#define WMI_HOST_HT_CAP_RX_STBC_2SS 0x0020 /* B4-B5 RX STBC */
#define WMI_HOST_HT_CAP_RX_STBC_3SS 0x0030 /* B4-B5 RX STBC */
#define WMI_HOST_HT_CAP_DEFAULT_ALL (WMI_HOST_HT_CAP_ENABLED | \
WMI_HOST_HT_CAP_HT20_SGI | \
WMI_HOST_HT_CAP_HT40_SGI | \
WMI_HOST_HT_CAP_TX_STBC | \
WMI_HOST_HT_CAP_RX_STBC | \
WMI_HOST_HT_CAP_LDPC)
/* WMI_HOST_VHT_CAP_* these maps to ieee 802.11ac vht capability information
field. The fields not defined here are not supported, or reserved.
Do not change these masks and if you have to add new one follow the
bitmask as specified by 802.11ac draft.
*/
#define WMI_HOST_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003
#define WMI_HOST_VHT_CAP_RX_LDPC 0x00000010
#define WMI_HOST_VHT_CAP_SGI_80MHZ 0x00000020
#define WMI_HOST_VHT_CAP_SGI_160MHZ 0x00000040
#define WMI_HOST_VHT_CAP_TX_STBC 0x00000080
#define WMI_HOST_VHT_CAP_RX_STBC_MASK 0x00000300
#define WMI_HOST_VHT_CAP_RX_STBC_MASK_SHIFT 8
#define WMI_HOST_VHT_CAP_SU_BFER 0x00000800
#define WMI_HOST_VHT_CAP_SU_BFEE 0x00001000
#define WMI_HOST_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000
#define WMI_HOST_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13
#define WMI_HOST_VHT_CAP_MAX_SND_DIM_MASK 0x00070000
#define WMI_HOST_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16
#define WMI_HOST_VHT_CAP_MU_BFER 0x00080000
#define WMI_HOST_VHT_CAP_MU_BFEE 0x00100000
#define WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000
#define WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIT 23
#define WMI_HOST_VHT_CAP_RX_FIXED_ANT 0x10000000
#define WMI_HOST_VHT_CAP_TX_FIXED_ANT 0x20000000
#define WMI_HOST_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002
/* These macros should be used when we wish to advertise STBC support for
* only 1SS or 2SS or 3SS. */
#define WMI_HOST_VHT_CAP_RX_STBC_1SS 0x00000100
#define WMI_HOST_VHT_CAP_RX_STBC_2SS 0x00000200
#define WMI_HOST_VHT_CAP_RX_STBC_3SS 0x00000300
#define WMI_HOST_VHT_CAP_DEFAULT_ALL (WMI_HOST_VHT_CAP_MAX_MPDU_LEN_11454 | \
WMI_HOST_VHT_CAP_SGI_80MHZ | \
WMI_HOST_VHT_CAP_TX_STBC | \
WMI_HOST_VHT_CAP_RX_STBC_MASK | \
WMI_HOST_VHT_CAP_RX_LDPC | \
WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP | \
WMI_HOST_VHT_CAP_RX_FIXED_ANT | \
WMI_HOST_VHT_CAP_TX_FIXED_ANT)
/* Interested readers refer to Rx/Tx MCS Map definition as defined in
802.11ac
*/
#define WMI_HOST_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1))
#define WMI_HOST_VHT_MAX_SUPP_RATE_MASK 0x1fff0000
#define WMI_HOST_VHT_MAX_SUPP_RATE_MASK_SHIFT 16
/** U-APSD configuration of peer station from (re)assoc request and TSPECs */
enum wmi_host_ap_ps_param_uapsd {
WMI_HOST_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
WMI_HOST_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
WMI_HOST_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
WMI_HOST_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
WMI_HOST_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
WMI_HOST_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
WMI_HOST_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
WMI_HOST_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
};
/** U-APSD maximum service period of peer station */
enum wmi_host_ap_ps_peer_param_max_sp {
WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
/* keep last! */
MAX_HOST_WMI_AP_PS_PEER_PARAM_MAX_SP,
};
#define WMI_HOST_UAPSD_AC_TYPE_DELI 0
#define WMI_HOST_UAPSD_AC_TYPE_TRIG 1
#define WMI_HOST_UAPSD_AC_BIT_MASK(ac, type) \
((type == WMI_HOST_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) :\
(1<<((ac<<1)+1)))
enum wmi_host_ap_ps_peer_param_wnm_sleep {
WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP_ENABLE,
WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP_DISABLE,
};
enum wmi_host_ap_ps_peer_param {
/** Set uapsd configuration for a given peer.
*
* This will include the delivery and trigger enabled state for every AC.
* The host MLME needs to set this based on AP capability and stations
* request Set in the association request received from the station.
*
* Lower 8 bits of the value specify the UAPSD configuration.
*
* (see enum wmi_ap_ps_param_uapsd)
* The default value is 0.
*/
WMI_HOST_AP_PS_PEER_PARAM_UAPSD = 0,
/**
* Set the service period for a UAPSD capable station
*
* The service period from wme ie in the (re)assoc request frame.
*
* (see enum wmi_ap_ps_peer_param_max_sp)
*/
WMI_HOST_AP_PS_PEER_PARAM_MAX_SP = 1,
/** Time in seconds for aging out buffered frames
* for STA in power save */
WMI_HOST_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
/** Specify frame types that are considered SIFS
* RESP trigger frame */
WMI_HOST_AP_PS_PEER_PARAM_SIFS_RESP_FRMTYPE = 3,
/** Specifies the trigger state of TID.
* Valid only for UAPSD frame type */
WMI_HOST_AP_PS_PEER_PARAM_SIFS_RESP_UAPSD = 4,
/** Specifies the WNM sleep state of a STA */
WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP = 5,
};
#define WMI_HOST_RXERR_CRC 0x01 /* CRC error on frame */
#define WMI_HOST_RXERR_DECRYPT 0x08 /* non-Michael decrypt error */
#define WMI_HOST_RXERR_MIC 0x10 /* Michael MIC decrypt error */
#define WMI_HOST_RXERR_KEY_CACHE_MISS 0x20 /* No/incorrect key matter in h/w */
enum wmi_host_sta_ps_param_uapsd {
WMI_HOST_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
WMI_HOST_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
WMI_HOST_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
WMI_HOST_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
WMI_HOST_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
WMI_HOST_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
WMI_HOST_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
WMI_HOST_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
};
enum wmi_host_sta_ps_param_rx_wake_policy {
/* Wake up when ever there is an RX activity on the VDEV. In this mode
* the Power save SM(state machine) will come out of sleep by either
* sending null frame (or) a data frame (with PS==0) in response to TIM
* bit set in the received beacon frame from AP.
*/
WMI_HOST_STA_PS_RX_WAKE_POLICY_WAKE = 0,
/* Here the power save state machine will not wakeup in response to TIM
* bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
* configuration setup by WMISET_PS_SET_UAPSD WMI command. When all
* access categories are delivery-enabled, the station will send a UAPSD
* trigger frame, otherwise it will send a PS-Poll.
*/
WMI_HOST_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
};
enum wmi_host_sta_ps_param_pspoll_count {
WMI_HOST_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
/* Values greater than 0 indicate the maximum numer of PS-Poll frames FW
* will send before waking up.
*/
};
/** Number of tx frames/beacon that cause the power save SM to wake up.
*
* Value 1 causes the SM to wake up for every TX. Value 0 has a special
* meaning, It will cause the SM to never wake up. This is useful if you want
* to keep the system to sleep all the time for some kind of test mode . host
* can change this parameter any time. It will affect at the next tx frame.
*/
enum wmi_host_sta_ps_param_tx_wake_threshold {
WMI_HOST_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
WMI_HOST_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
/* Values greater than one indicate that many TX attempts per beacon
* interval before the STA will wake up
*/
};
/*
* Transmit power scale factor.
*
*/
typedef enum {
WMI_HOST_TP_SCALE_MAX = 0, /* no scaling (default) */
WMI_HOST_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */
WMI_HOST_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */
WMI_HOST_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */
WMI_HOST_TP_SCALE_MIN = 4, /* min, but still on */
WMI_HOST_TP_SCALE_SIZE = 5, /* max num of enum */
} WMI_HOST_TP_SCALE;
enum {
WMI_HOST_RATEPWR_TABLE_OPS_SET,
WMI_HOST_RATEPWR_TABLE_OPS_GET,
};
/* reserved up through 0xF */
/**
* struct wmi_host_dcs_mib_stats - WLAN IM stats from target to host
* Below statistics are sent from target to host periodically.
* These are collected at target as long as target is running
* and target chip is not in sleep.
* @listen_time:
* @reg_tx_frame_cnt:
* @reg_rx_frame_cnt:
* @reg_rxclr_cnt:
* @reg_cycle_cnt: delta cycle count
* @reg_rxclr_ext_cnt:
* @reg_ofdm_phyerr_cnt:
* @reg_cck_phyerr_cnt: CCK err count since last reset, read from register
*/
typedef struct _hp_dcs_mib_stats {
int32_t listen_time;
uint32_t reg_tx_frame_cnt;
uint32_t reg_rx_frame_cnt;
uint32_t reg_rxclr_cnt;
uint32_t reg_cycle_cnt;
uint32_t reg_rxclr_ext_cnt;
uint32_t reg_ofdm_phyerr_cnt;
uint32_t reg_cck_phyerr_cnt;
} wmi_host_dcs_mib_stats_t;
/**
* struct wmi_host_dcs_im_tgt_stats - DCS IM target stats
* @reg_tsf32: current running TSF from the TSF-1
* @last_ack_rssi: Known last frame rssi, in case of multiple stations, if
* and at different ranges, this would not gaurantee that
* this is the least rssi.
* @tx_waste_time: Sum of all the failed durations in the last
* one second interval.
* @rx_time: count how many times the hal_rxerr_phy is marked, in this
* time period
* @phyerr_cnt:
* @mib_stats: wmi_host_dcs_mib_stats_t - collected mib stats as explained
* in mib structure
*/
typedef struct _wmi_host_dcs_im_tgt_stats {
uint32_t reg_tsf32;
uint32_t last_ack_rssi;
uint32_t tx_waste_time;
uint32_t rx_time;
uint32_t phyerr_cnt;
wmi_host_dcs_mib_stats_t mib_stats;
} wmi_host_dcs_im_tgt_stats_t;
/**
* Enum for pktlog req
*/
typedef enum {
WMI_HOST_PKTLOG_EVENT_RX = 0x1,
WMI_HOST_PKTLOG_EVENT_TX = 0x2,
WMI_HOST_PKTLOG_EVENT_RCF = 0x4, /* Rate Control Find */
WMI_HOST_PKTLOG_EVENT_RCU = 0x8, /* Rate Control Update */
WMI_HOST_PKTLOG_EVENT_DBG_PRINT = 0x10, /* DEBUG prints */
/* To support Smart Antenna */
WMI_HOST_PKTLOG_EVENT_SMART_ANTENNA = 0x20,
WMI_HOST_PKTLOG_EVENT_H_INFO = 0x40,
WMI_HOST_PKTLOG_EVENT_STEERING = 0x80,
} WMI_HOST_PKTLOG_EVENT;
/**
* wmi_host_phyerr
*
*/
#define WMI_HOST_PHY_ERROR_SPECTRAL_SCAN 0x26
#define WMI_HOST_PHY_ERROR_FALSE_RADAR_EXT 0x24
#define WMI_HOST_AR900B_DFS_PHYERR_MASK 0x4
#define WMI_HOST_AR900B_SPECTRAL_PHYERR_MASK 0x4000000
/**
* struct wmi_host_perchain_rssi_info - per chain RSSI info
* @rssi_pri20: RSSI on primary 20
* @rssi_sec20: RSSI on secomdary 20
* @rssi_sec40: RSSI secondary 40
* @rssi_sec80: RSSI secondary 80
*/
typedef struct wmi_host_perchain_rssi_info {
int8_t rssi_pri20;
int8_t rssi_sec20;
int8_t rssi_sec40;
int8_t rssi_sec80;
} wmi_host_perchain_rssi_info_t;
/**
* struct _wmi_host_rf_info - RF measurement information
* @rssi_comb: RSSI Information
* @pc_rssi_info[4]: For now, we know we are getting information
* for only 4 chains at max. For future extensions
* use a define
* @noise_floor: Noise floor information
*/
typedef struct _wmi_host_rf_info {
int8_t rssi_comb;
wmi_host_perchain_rssi_info_t pc_rssi_info[4];
int16_t noise_floor[4];
} wmi_host_rf_info_t;
/**
* struct _wmi_host_chan_info
* @center_freq1: center frequency 1 in MHz
* @center_freq2: center frequency 2 in MHz -valid only for
* 11ACVHT 80PLUS80 mode
* @chan_width: channel width in MHz
*/
typedef struct _wmi_host_chan_info {
u_int16_t center_freq1;
u_int16_t center_freq2;
u_int8_t chan_width;
} wmi_host_chan_info_t;
/**
* struct wmi_host_phyerr
* @rf_info:
* @chan_info:
* @tsf64:
* @phy_err_code:
* @tsf_timestamp:
* @bufp:
* @buf_len:
* @phy_err_mask0:
* @phy_err_mask1:
*/
typedef struct _wmi_host_phyerr {
wmi_host_rf_info_t rf_info;
wmi_host_chan_info_t chan_info;
uint64_t tsf64;
int32_t phy_err_code;
uint32_t tsf_timestamp;
uint8_t *bufp;
uint32_t buf_len;
uint32_t phy_err_mask0;
uint32_t phy_err_mask1;
} wmi_host_phyerr_t;
/**
* struct wmi_host_rtt_event_hdr
* @req_id: request id
* @status: status
* @meas_done: measurement done flag
* @meas_type: measurement type
* @report_type: report type
* @v3_status: v2 status
* @v3_finish:
* @v3_tm_start:
* @num_ap: number of AP
* @result: resuult
* @dest_mac: destination mac
*/
typedef struct {
uint16_t req_id;
uint16_t status:1,
meas_done:1,
meas_type:3,
report_type:3,
v3_status:2,
v3_finish:1,
v3_tm_start:1,
num_ap:4;
uint16_t result;
uint8_t dest_mac[IEEE80211_ADDR_LEN];
} wmi_host_rtt_event_hdr;
/**
* struct wmi_host_rtt_meas_event - RTT measurement event
* @chain_mask:
* @bw:
* @rsvd:
* @txrxchain_mask: Bit:0-3:chain mask
* Bit 4-5: band width info
* 00 --Legacy 20, 01 --HT/VHT20
* 10 --HT/VHT40, 11 -- VHT80
* @tod: resolution of 0.1ns
* @toa: resolution of 0.1ns
* @t3:
* @t4:
* @rssi0:
* @rssi1:
* @rssi2:
* @rssi3:
*/
typedef struct {
uint32_t chain_mask:3,
bw:2,
rsvd:27;
uint32_t txrxchain_mask;
uint64_t tod;
uint64_t toa;
uint64_t t3;
uint64_t t4;
uint32_t rssi0;
uint32_t rssi1;
uint32_t rssi2;
uint32_t rssi3;
} wmi_host_rtt_meas_event;
/*----RTT Report event definition ----*/
typedef enum {
/* rtt cmd header parsing error --terminate */
WMI_HOST_RTT_COMMAND_HEADER_ERROR = 0,
/* rtt body parsing error -- skip current STA REQ */
WMI_HOST_RTT_COMMAND_ERROR,
/* rtt no resource -- terminate */
WMI_HOST_RTT_MODULE_BUSY,
/* STA exceed the support limit -- only server the first n STA */
WMI_HOST_RTT_TOO_MANY_STA,
/* any allocate failure */
WMI_HOST_RTT_NO_RESOURCE,
/* can not find vdev with vdev ID - skip current STA REQ */
WMI_HOST_RTT_VDEV_ERROR,
/* Tx failure -- continiue and measure number */
WMI_HOST_RTT_TRANSIMISSION_ERROR,
/* wait for first TM timer expire-terminate current STA measurement */
WMI_HOST_RTT_TM_TIMER_EXPIRE,
/* we do not support RTT measurement with this type of frame */
WMI_HOST_RTT_FRAME_TYPE_NOSUPPORT,
/* whole RTT measurement timer expire-terminate
** current STA measurement */
WMI_HOST_RTT_TIMER_EXPIRE,
/* channel swicth failed */
WMI_HOST_RTT_CHAN_SWITCH_ERROR,
/* TMR trans error, this dest peer will be skipped */
WMI_HOST_RTT_TMR_TRANS_ERROR,
/* V3 only. If both CFR and Token mismatch, do not report */
WMI_HOST_RTT_NO_REPORT_BAD_CFR_TOKEN,
/* For First TM, if CFR is bad, then do not report */
WMI_HOST_RTT_NO_REPORT_FIRST_TM_BAD_CFR,
/* do not allow report type2 mix with type 0, 1 */
WMI_HOST_RTT_REPORT_TYPE2_MIX,
/* LCI Configuration OK. - Responder only */
WMI_HOST_RTT_LCI_CFG_OK,
/* LCR configuration OK. - Responder only */
WMI_HOST_RTT_LCR_CFG_OK,
/* Bad configuration LCI (or) LCR request - Responder only */
WMI_HOST_RTT_CFG_ERROR,
WMI_HOST_WMI_RTT_REJECT_MAX,
} WMI_HOST_RTT_ERROR_INDICATOR;
typedef struct {
wmi_host_rtt_event_hdr hdr;
WMI_HOST_RTT_ERROR_INDICATOR reject_reason;
} wmi_host_rtt_error_report_event;
#if defined(AR9888)
typedef enum {
WMI_HOST_PROF_CPU_IDLE,
WMI_HOST_PROF_PPDU_PROC,
WMI_HOST_PROF_PPDU_POST,
WMI_HOST_PROF_HTT_TX_INPUT,
WMI_HOST_PROF_MSDU_ENQ,
WMI_HOST_PROF_PPDU_POST_HAL,
WMI_HOST_PROF_COMPUTE_TX_TIME,
/* Add new ID's above this. */
WMI_HOST_PROF_MAX_ID,
} wmi_host_profile_id_t;
#endif
#define WMI_HOST_WLAN_PROFILE_MAX_HIST 3
#define WMI_HOST_WLAN_PROFILE_MAX_BIN_CNT 32
#if defined(AR9888)
#define WMI_HOST_MAX_PROFILE WMI_HOST_PROF_MAX_ID
#else
#define WMI_HOST_MAX_PROFILE WMI_HOST_WLAN_PROFILE_MAX_BIN_CNT
#endif
/**
* struct wmi_host_wlan_profile - Host profile param
* @id: profile id
* @cnt: Count
* @tot:
* @min: minimum
* @max: Mac
* @hist_intvl: history interval
* @hist: profile data history
*/
typedef struct {
uint32_t id;
uint32_t cnt;
uint32_t tot;
uint32_t min;
uint32_t max;
uint32_t hist_intvl;
uint32_t hist[WMI_HOST_WLAN_PROFILE_MAX_HIST];
} wmi_host_wlan_profile_t;
/**
* struct wmi_host_wlan_profile_ctx_t - profile context
* @tot: time in us
* @tx_msdu_cnt: MSDU TX count
* @tx_mpdu_cnt: MPDU tx count
* @tx_ppdu_cnt: PPDU tx count
* @rx_msdu_cnt: MSDU RX count
* @rx_mpdu_cnt: MPDU RXcount
* @bin_count: Bin count
*/
typedef struct {
uint32_t tot;
uint32_t tx_msdu_cnt;
uint32_t tx_mpdu_cnt;
uint32_t tx_ppdu_cnt;
uint32_t rx_msdu_cnt;
uint32_t rx_mpdu_cnt;
uint32_t bin_count;
} wmi_host_wlan_profile_ctx_t;
/**
* struct wmi_host_chan_info_event - Channel info WMI event
* @err_code: Error code
* @freq: Channel freq
* @cmd_flags: Read flags
* @noise_floor: Noise Floor value
* @rx_clear_count: rx clear count
* @cycle_count: cycle count
* @chan_tx_pwr_range: channel tx power per range
* @chan_tx_pwr_tp: channel tx power per throughput
* @rx_frame_count: rx frame count
* @rx_11b_mode_data_duration: 11b mode data duration
*/
typedef struct {
uint32_t err_code;
uint32_t freq;
uint32_t cmd_flags;
uint32_t noise_floor;
uint32_t rx_clear_count;
uint32_t cycle_count;
uint32_t chan_tx_pwr_range;
uint32_t chan_tx_pwr_tp;
uint32_t rx_frame_count;
uint32_t rx_11b_mode_data_duration;
} wmi_host_chan_info_event;
/**
* struct wmi_host_pdev_channel_hopping_event
* @noise_floor_report_iter: Noise threshold iterations with high values
* @noise_floor_total_iter: Total noise threshold iterations
*/
typedef struct {
uint32_t noise_floor_report_iter;
uint32_t noise_floor_total_iter;
} wmi_host_pdev_channel_hopping_event;
/**
* struct wmi_host_pdev_bss_chan_info_event
* @freq: Units in MHz
* @noise_floor: units are dBm
* @rx_clear_count_low:
* @rx_clear_count_high:
* @cycle_count_low:
* @cycle_count_high:
* @tx_cycle_count_low:
* @tx_cycle_count_high:
* @rx_cycle_count_low:
* @rx_cycle_count_high:
* @rx_bss_cycle_count_low:
* @rx_bss_cycle_count_high:
* @reserved:
*/
typedef struct {
uint32_t freq;
uint32_t noise_floor;
uint32_t rx_clear_count_low;
uint32_t rx_clear_count_high;
uint32_t cycle_count_low;
uint32_t cycle_count_high;
uint32_t tx_cycle_count_low;
uint32_t tx_cycle_count_high;
uint32_t rx_cycle_count_low;
uint32_t rx_cycle_count_high;
uint32_t rx_bss_cycle_count_low;
uint32_t rx_bss_cycle_count_high;
uint32_t reserved;
} wmi_host_pdev_bss_chan_info_event;
#define WMI_HOST_INST_STATS_INVALID_RSSI 0
/**
* struct wmi_host_inst_stats_resp
* @iRSSI: Instantaneous RSSI
* @peer_macaddr: peer mac address
*/
typedef struct {
uint32_t iRSSI;
wmi_host_mac_addr peer_macaddr;
} wmi_host_inst_stats_resp;
/* Event definition and new structure addition to send event
* to host to block/unblock tx data traffic based on peer_ast_idx or vdev id
*/
#define WMI_HOST_INVALID_PEER_AST_INDEX 0xffff
#define WMI_HOST_TX_DATA_TRAFFIC_CTRL_BLOCK 0x1
#define WMI_HOST_TX_DATA_TRAFFIC_CTRL_UNBLOCK 0x2
/**
* struct wmi_host_tx_data_traffic_ctrl_event
* @peer_ast_idx: For vdev based control, peer_ast_idx will be
* WMI_INVALID_PEER_AST_INDEX
* @vdev_id: only applies if peer_ast_idx == INVALID
* @ctrl_cmd: WMI_TX_DATA_TRAFFIC_CTRL_BLOCK or
* WMI_TX_DATA_TRAFFIC_CTRL_UNBLOCK
*/
typedef struct {
uint32_t peer_ast_idx;
uint32_t vdev_id;
uint32_t ctrl_cmd;
} wmi_host_tx_data_traffic_ctrl_event;
/**
* struct wmi_host_ath_dcs_cw_int
* @channel: either number or freq in mhz
*/
typedef struct {
uint32_t channel;
} wmi_host_ath_dcs_cw_int;
#define WMI_MAX_POWER_DBG_ARGS 8
/**
* struct wmi_power_dbg_params - power debug command parameter
* @pdev_id: subsystem identifier
* @module_id: parameter id
* @num_arg: no of arguments
* @args: arguments
*/
struct wmi_power_dbg_params {
uint32_t pdev_id;
uint32_t module_id;
uint32_t num_args;
uint32_t args[WMI_MAX_POWER_DBG_ARGS];
};
/**
* struct wmi_adaptive_dwelltime_params - the adaptive dwelltime params
* @vdev_id: vdev id
* @is_enabled: Adaptive dwell time is enabled/disabled
* @dwelltime_mode: global default adaptive dwell mode
* @lpf_weight: weight to calculate the average low pass
* filter for channel congestion
* @passive_mon_intval: intval to monitor wifi activity in passive scan in msec
* @wifi_act_threshold: % of wifi activity used in passive scan 0-100
*
*/
struct wmi_adaptive_dwelltime_params {
uint32_t vdev_id;
bool is_enabled;
enum wmi_dwelltime_adaptive_mode dwelltime_mode;
uint8_t lpf_weight;
uint8_t passive_mon_intval;
uint8_t wifi_act_threshold;
};
/**
* struct wmi_per_roam_config - per based roaming parameters
* @enable: if PER based roaming is enabled/disabled
* @tx_high_rate_thresh: high rate threshold at which PER based
* roam will stop in tx path
* @rx_high_rate_thresh: high rate threshold at which PER based
* roam will stop in rx path
* @tx_low_rate_thresh: rate below which traffic will be considered
* for PER based roaming in Tx path
* @rx_low_rate_thresh: rate below which traffic will be considered
* for PER based roaming in Tx path
* @tx_rate_thresh_percnt: % above which when traffic is below low_rate_thresh
* will be considered for PER based scan in tx path
* @rx_rate_thresh_percnt: % above which when traffic is below low_rate_thresh
* will be considered for PER based scan in rx path
* @per_rest_time: time for which PER based roam will wait once it
* issues a roam scan.
* @tx_per_mon_time: Minimum time required to be considered as valid scenario
* for PER based roam in tx path
* @rx_per_mon_time: Minimum time required to be considered as valid scenario
* for PER based roam in rx path
* @min_candidate_rssi: Minimum RSSI threshold for candidate AP to be used for
* PER based roaming
*/
struct wmi_per_roam_config {
uint32_t enable;
uint32_t tx_high_rate_thresh;
uint32_t rx_high_rate_thresh;
uint32_t tx_low_rate_thresh;
uint32_t rx_low_rate_thresh;
uint32_t tx_rate_thresh_percnt;
uint32_t rx_rate_thresh_percnt;
uint32_t per_rest_time;
uint32_t tx_per_mon_time;
uint32_t rx_per_mon_time;
uint32_t min_candidate_rssi;
};
/**
* struct wmi_per_roam_config_req: PER based roaming config request
* @vdev_id: vdev id on which config needs to be set
* @per_config: PER config
*/
struct wmi_per_roam_config_req {
uint8_t vdev_id;
struct wmi_per_roam_config per_config;
};
/**
* struct wmi_fw_dump_seg_req - individual segment details
* @seg_id - segment id.
* @seg_start_addr_lo - lower address of the segment.
* @seg_start_addr_hi - higher address of the segment.
* @seg_length - length of the segment.
* @dst_addr_lo - lower address of the destination buffer.
* @dst_addr_hi - higher address of the destination buffer.
*
* This structure carries the information to firmware about the
* individual segments. This structure is part of firmware memory
* dump request.
*/
struct wmi_fw_dump_seg_req {
uint8_t seg_id;
uint32_t seg_start_addr_lo;
uint32_t seg_start_addr_hi;
uint32_t seg_length;
uint32_t dst_addr_lo;
uint32_t dst_addr_hi;
};
/**
* enum wmi_userspace_log_level - Log level at userspace
* @WMI_LOG_LEVEL_NO_COLLECTION: verbose_level 0 corresponds to no collection
* @WMI_LOG_LEVEL_NORMAL_COLLECT: verbose_level 1 correspond to normal log
* level with minimal user impact. This is the default value.
* @WMI_LOG_LEVEL_ISSUE_REPRO: verbose_level 2 are enabled when user is lazily
* trying to reproduce a problem, wifi performances and power can be impacted
* but device should not otherwise be significantly impacted
* @WMI_LOG_LEVEL_ACTIVE: verbose_level 3+ are used when trying to
* actively debug a problem
*
* Various log levels defined in the userspace for logging applications
*/
enum wmi_userspace_log_level {
WMI_LOG_LEVEL_NO_COLLECTION,
WMI_LOG_LEVEL_NORMAL_COLLECT,
WMI_LOG_LEVEL_ISSUE_REPRO,
WMI_LOG_LEVEL_ACTIVE,
};
/**
* struct encrypt_decrypt_req_params - encrypt/decrypt params
* @vdev_id: virtual device id
* @key_flag: This indicates firmware to encrypt/decrypt payload
* see ENCRYPT_DECRYPT_FLAG
* @key_idx: Index used in storing key
* @key_cipher: cipher used for encryption/decryption
* Eg: see WMI_CIPHER_AES_CCM for CCMP
* @key_len: length of key data
* @key_txmic_len: length of Tx MIC
* @key_rxmic_len: length of Rx MIC
* @key_data: Key
* @pn: packet number
* @mac_header: MAC header
* @data_len: length of data
* @data: pointer to payload
*/
struct encrypt_decrypt_req_params {
uint32_t vdev_id;
uint8_t key_flag;
uint32_t key_idx;
uint32_t key_cipher;
uint32_t key_len;
uint32_t key_txmic_len;
uint32_t key_rxmic_len;
uint8_t key_data[MAC_MAX_KEY_LENGTH];
uint8_t pn[MAC_PN_LENGTH];
uint8_t mac_header[MAX_MAC_HEADER_LEN];
uint32_t data_len;
uint8_t *data;
};
#define MAX_SAR_LIMIT_ROWS_SUPPORTED 64
/**
* struct sar_limit_cmd_row - sar limits row
* @band_id: Optional param for frequency band
* See %enum wmi_sar_band_id_flags for possible values
* @chain_id: Optional param for antenna chain id
* @mod_id: Optional param for modulation scheme
* See %enum wmi_sar_mod_id_flags for possible values
* @limit_value: Mandatory param providing power limits in steps of 0.5 dbm
* @validity_bitmap: bitmap of valid optional params in sar_limit_cmd_row struct
* See WMI_SAR_*_VALID_MASK for possible values
*/
struct sar_limit_cmd_row {
uint32_t band_id;
uint32_t chain_id;
uint32_t mod_id;
uint32_t limit_value;
uint32_t validity_bitmap;
};
/**
* struct sar_limit_cmd_params - sar limits params
* @sar_enable: flag to enable SAR
* See %enum wmi_sar_feature_state_flags for possible values
* @num_limit_rows: number of items in sar_limits
* @commit_limits: indicates firmware to start apply new SAR values
* @sar_limit_row_list: pointer to array of sar limit rows
*/
struct sar_limit_cmd_params {
uint32_t sar_enable;
uint32_t num_limit_rows;
uint32_t commit_limits;
struct sar_limit_cmd_row *sar_limit_row_list;
};
/**
* struct sar_limit_event_row - sar limits row
* @band_id: Frequency band.
* See %enum wmi_sar_band_id_flags for possible values
* @chain_id: Chain id
* @mod_id: Modulation scheme
* See %enum wmi_sar_mod_id_flags for possible values
* @limit_value: Power limits in steps of 0.5 dbm that is currently active for
* the given @band_id, @chain_id, and @mod_id
*/
struct sar_limit_event_row {
uint32_t band_id;
uint32_t chain_id;
uint32_t mod_id;
uint32_t limit_value;
};
/**
* struct sar_limit_event - sar limits params
* @sar_enable: Current status of SAR enablement.
* See %enum wmi_sar_feature_state_flags for possible values
* @num_limit_rows: number of items in sar_limits
* @sar_limit_row: array of sar limit rows. Only @num_limit_rows
* should be considered valid.
*/
struct sar_limit_event {
uint32_t sar_enable;
uint32_t num_limit_rows;
struct sar_limit_event_row
sar_limit_row[MAX_SAR_LIMIT_ROWS_SUPPORTED];
};
/**
* enum rcpi_measurement_type - for identifying type of rcpi measurement
* @RCPI_MEASUREMENT_TYPE_AVG_MGMT: avg rcpi of mgmt frames
* @RCPI_MEASUREMENT_TYPE_AVG_DATA: avg rcpi of data frames
* @RCPI_MEASUREMENT_TYPE_LAST_MGMT: rcpi of last mgmt frame
* @RCPI_MEASUREMENT_TYPE_LAST_DATA: rcpi of last data frame
*
*/
enum rcpi_measurement_type {
RCPI_MEASUREMENT_TYPE_AVG_MGMT = 0x1,
RCPI_MEASUREMENT_TYPE_AVG_DATA = 0x2,
RCPI_MEASUREMENT_TYPE_LAST_MGMT = 0x3,
RCPI_MEASUREMENT_TYPE_LAST_DATA = 0x4,
};
/**
* struct rcpi_req - rcpi parameter
* @vdev_id: virtual device id
* @measurement_type: type of rcpi from enum wmi_rcpi_measurement_type
* @mac_addr: peer mac addr for which measurement is required
*/
struct rcpi_req {
uint32_t vdev_id;
enum rcpi_measurement_type measurement_type;
uint8_t mac_addr[IEEE80211_ADDR_LEN];
};
#define WMI_SUPPORTED_ACTION_CATEGORY 256
#define WMI_SUPPORTED_ACTION_CATEGORY_ELE_LIST (WMI_SUPPORTED_ACTION_CATEGORY/32)
/**
* struct action_wakeup_set_param - action wakeup set params
* @vdev_id: virtual device id
* @operation: 0 reset to fw default, 1 set the bits,
* 2 add the setting bits, 3 delete the setting bits
* @action_category_map: bit mapping.
* @action_per_category: action id bitmask per category
*/
struct action_wakeup_set_param {
uint32_t vdev_id;
uint32_t operation;
uint32_t action_category_map[WMI_SUPPORTED_ACTION_CATEGORY_ELE_LIST];
uint32_t action_per_category[WMI_SUPPORTED_ACTION_CATEGORY];
};
/*
* Start of ACTION OUI definitions
* some of them have dependencies from wmi_unified.h
*/
/*
* Maximum number of action oui extensions supported in
* each action oui category
*/
#define WMI_ACTION_OUI_MAX_EXTENSIONS 10
#define WMI_ACTION_OUI_MAX_OUI_LENGTH 5
#define WMI_ACTION_OUI_MAX_DATA_LENGTH 20
#define WMI_ACTION_OUI_MAX_DATA_MASK_LENGTH 3
#define WMI_ACTION_OUI_MAC_MASK_LENGTH 1
#define WMI_ACTION_OUI_MAX_CAPABILITY_LENGTH 1
/*
* NSS Mask and NSS Offset to extract NSS info from
* capability field of action oui extension
*/
#define WMI_ACTION_OUI_CAPABILITY_NSS_MASK 0x0f
#define WMI_ACTION_OUI_CAPABILITY_NSS_OFFSET 0
#define WMI_ACTION_OUI_CAPABILITY_NSS_MASK_1X1 1
#define WMI_ACTION_OUI_CAPABILITY_NSS_MASK_2X2 2
#define WMI_ACTION_OUI_CAPABILITY_NSS_MASK_3X3 4
#define WMI_ACTION_OUI_CAPABILITY_NSS_MASK_4X4 8
/*
* Mask and offset to extract HT and VHT info from
* capability field of action oui extension
*/
#define WMI_ACTION_OUI_CAPABILITY_HT_ENABLE_MASK 0x10
#define WMI_ACTION_OUI_CAPABILITY_HT_ENABLE_OFFSET 4
#define WMI_ACTION_OUI_CAPABILITY_VHT_ENABLE_MASK 0x20
#define WMI_ACTION_OUI_CAPABILITY_VHT_ENABLE_OFFSET 5
/*
* Mask and offset to extract Band (2G and 5G) info from
* capability field of action oui extension
*/
#define WMI_ACTION_OUI_CAPABILITY_BAND_MASK 0xC0
#define WMI_ACTION_OUI_CAPABILITY_BAND_OFFSET 6
#define WMI_ACTION_OUI_CAPABILITY_2G_BAND_MASK 0x40
#define WMI_ACTION_OUI_CAPABILITY_2G_BAND_OFFSET 6
#define WMI_ACTION_CAPABILITY_5G_BAND_MASK 0x80
#define WMI_ACTION_CAPABILITY_5G_BAND_OFFSET 7
/**
* enum wmi_action_oui_id - to identify type of action oui
* @WMI_ACTION_OUI_CONNECT_1X1: for 1x1 connection only
* @WMI_ACTION_OUI_ITO_EXTENSION: for extending inactivity time of station
* @WMI_ACTION_OUI_CCKM_1X1: for TX with CCKM 1x1 only
* @WMI_ACTION_OUI_MAXIMUM_ID: maximun number of action oui types
*/
enum wmi_action_oui_id {
WMI_ACTION_OUI_CONNECT_1X1 = 0,
WMI_ACTION_OUI_ITO_EXTENSION = 1,
WMI_ACTION_OUI_CCKM_1X1 = 2,
WMI_ACTION_OUI_MAXIMUM_ID = 3,
};
/**
* enum wmi_action_oui_info - to indicate presence of various action OUI
* fields in action oui extension, following identifiers are to be set in
* the info mask field of action oui extension
* @WMI_ACTION_OUI_INFO_OUI: to indicate presence of OUI string
* @WMI_ACTION_OUI_INFO_MAC_ADDRESS: to indicate presence of mac address
* @WMI_ACTION_OUI_INFO_AP_CAPABILITY_NSS: to indicate presence of nss info
* @WMI_ACTION_OUI_INFO_AP_CAPABILITY_HT: to indicate presence of HT cap
* @WMI_ACTION_OUI_INFO_AP_CAPABILITY_VHT: to indicate presence of VHT cap
* @WMI_ACTION_OUI_INFO_AP_CAPABILITY_BAND: to indicate presence of band info
*/
enum wmi_action_oui_info {
/*
* OUI centric parsing, expect OUI in each action OUI extension,
* hence, WMI_ACTION_OUI_INFO_OUI is dummy
*/
WMI_ACTION_OUI_INFO_OUI = 1 << 0,
WMI_ACTION_OUI_INFO_MAC_ADDRESS = 1 << 1,
WMI_ACTION_OUI_INFO_AP_CAPABILITY_NSS = 1 << 2,
WMI_ACTION_OUI_INFO_AP_CAPABILITY_HT = 1 << 3,
WMI_ACTION_OUI_INFO_AP_CAPABILITY_VHT = 1 << 4,
WMI_ACTION_OUI_INFO_AP_CAPABILITY_BAND = 1 << 5,
};
/* Total mask of all enum wmi_action_oui_info IDs */
#define WMI_ACTION_OUI_INFO_MASK 0x3F
/**
* struct wmi_action_oui_extension - action oui extension contents
* @info_mask: info mask
* @oui_length: length of the oui, either 3 or 5 bytes
* @data_length: length of the oui data
* @data_mask_length: length of the data mask
* @mac_addr_length: length of the mac addr
* @mac_mask_length: length of the mac mask
* @capability_length: length of the capability
* @oui: oui value
* @data: data buffer
* @data_mask: data mask buffer
* @mac_addr: mac addr
* @mac_mask: mac mask
* @capability: capability buffer
*/
struct wmi_action_oui_extension {
uint32_t info_mask;
uint32_t oui_length;
uint32_t data_length;
uint32_t data_mask_length;
uint32_t mac_addr_length;
uint32_t mac_mask_length;
uint32_t capability_length;
uint8_t oui[WMI_ACTION_OUI_MAX_OUI_LENGTH];
uint8_t data[WMI_ACTION_OUI_MAX_DATA_LENGTH];
uint8_t data_mask[WMI_ACTION_OUI_MAX_DATA_MASK_LENGTH];
uint8_t mac_addr[QDF_MAC_ADDR_SIZE];
uint8_t mac_mask[WMI_ACTION_OUI_MAC_MASK_LENGTH];
uint8_t capability[WMI_ACTION_OUI_MAX_CAPABILITY_LENGTH];
};
/**
* struct wmi_action_oui - Contains specific action oui information
* @action_id: type of action from enum wmi_action_oui_info
* @no_oui_extensions: number of action oui extensions of type @action_id
* @total_no_oui_extensions: total no of oui extensions from all
* action oui types, this is just a total count needed by firmware
* @extension: pointer to zero length array, to indicate this structure is
* followed by a array of @no_oui_extensions structures of
* type struct wmi_action_oui_extension
*/
struct wmi_action_oui {
enum wmi_action_oui_id action_id;
uint32_t no_oui_extensions;
uint32_t total_no_oui_extensions;
struct wmi_action_oui_extension extension[0];
};
/* End of ACTION OUI definitions */
/**
* struct set_arp_stats - set/reset arp stats
* @vdev_id: session id
* @flag: enable/disable stats
* @pkt_type: type of packet(1 - arp)
* @ip_addr: subnet ipv4 address in case of encrypted packets
* @pkt_type_bitmap: pkt bitmap
* @tcp_src_port: tcp src port for pkt tracking
* @tcp_dst_port: tcp dst port for pkt tracking
* @icmp_ipv4: target ipv4 address to track ping packets
* @reserved: reserved
*/
struct set_arp_stats {
uint32_t vdev_id;
uint8_t flag;
uint8_t pkt_type;
uint32_t ip_addr;
uint32_t pkt_type_bitmap;
uint32_t tcp_src_port;
uint32_t tcp_dst_port;
uint32_t icmp_ipv4;
uint32_t reserved;
};
/**
* struct get_arp_stats - get arp stats from firmware
* @pkt_type: packet type(1 - ARP)
* @vdev_id: session id
*/
struct get_arp_stats {
uint8_t pkt_type;
uint32_t vdev_id;
};
#define WMI_SCAN_CLIENT_MAX 7
/**
* struct wmi_dbs_scan_sel_params - DBS scan selection params
* @num_clients: Number of scan clients dutycycle
* @pdev_id: pdev_id for identifying the MAC
* @module_id: scan client module id
* @num_dbs_scans: number of DBS scans
* @num_non_dbs_scans: number of non-DBS scans
*/
struct wmi_dbs_scan_sel_params {
uint32_t num_clients;
uint32_t pdev_id;
uint32_t module_id[WMI_SCAN_CLIENT_MAX];
uint32_t num_dbs_scans[WMI_SCAN_CLIENT_MAX];
uint32_t num_non_dbs_scans[WMI_SCAN_CLIENT_MAX];
};
/**
* struct wmi_limit_off_chan_param - limit off channel parameters
* @vdev_id: vdev id
* @status: status of the command (enable/disable)
* @max_offchan_time: max off channel time
* @rest_time: home channel time
* @skip_dfs_chans: skip dfs channels during scan
*/
struct wmi_limit_off_chan_param {
uint32_t vdev_id;
bool status;
uint32_t max_offchan_time;
uint32_t rest_time;
bool skip_dfs_chans;
};
/**
* struct wmi_mawc_roam_params - Motion Aided wireless connectivity params
* @vdev_id: VDEV on which the parameters should be applied
* @enable: MAWC roaming feature enable/disable
* @traffic_load_threshold: Traffic threshold in kBps for MAWC roaming
* @best_ap_rssi_threshold: AP RSSI Threshold for MAWC roaming
* @rssi_stationary_high_adjust: High RSSI adjustment value to supress scan
* @rssi_stationary_low_adjust: Low RSSI adjustment value to supress scan
*/
struct wmi_mawc_roam_params {
uint8_t vdev_id;
bool enable;
uint32_t traffic_load_threshold;
uint32_t best_ap_rssi_threshold;
uint8_t rssi_stationary_high_adjust;
uint8_t rssi_stationary_low_adjust;
};
/**
* @time_offset: time offset after 11k offload command to trigger a neighbor
* report request (in seconds)
* @low_rssi_offset: Offset from rssi threshold to trigger a neighbor
* report request (in dBm)
* @bmiss_count_trigger: Number of beacon miss events to trigger neighbor
* report request
* @per_threshold_offset: offset from PER threshold to trigger neighbor
* report request (in %)
* @neighbor_report_cache_timeout: timeout after which new trigger can enable
* sending of a neighbor report request (in seconds)
* @max_neighbor_report_req_cap: max number of neighbor report requests that
* can be sent to the peer in the current session
* @ssid: Current connect SSID info
*/
struct wmi_11k_offload_neighbor_report_params {
uint32_t time_offset;
uint32_t low_rssi_offset;
uint32_t bmiss_count_trigger;
uint32_t per_threshold_offset;
uint32_t neighbor_report_cache_timeout;
uint32_t max_neighbor_report_req_cap;
struct mac_ssid ssid;
};
/**
* struct wmi_11k_offload_params - offload 11k features to FW
* @vdev_id: vdev id
* @offload_11k_bitmask: bitmask to specify offloaded features
* B0: Neighbor Report Request offload
* B1-B31: Reserved
* @neighbor_report_params: neighbor report offload params
*/
struct wmi_11k_offload_params {
uint32_t vdev_id;
uint32_t offload_11k_bitmask;
struct wmi_11k_offload_neighbor_report_params neighbor_report_params;
};
/**
* struct wmi_invoke_neighbor_report_params - Invoke neighbor report request
* from IW to FW
* @vdev_id: vdev id
* @send_resp_to_host: bool to send response to host or not
* @ssid: ssid given from the IW command
*/
struct wmi_invoke_neighbor_report_params {
uint32_t vdev_id;
uint32_t send_resp_to_host;
struct mac_ssid ssid;
};
/**
* struct wmi_apf_write_memory_params - Android Packet Filter write memory
* params
* @vdev_id: VDEV on which APF memory is to be written
* @apf_version: APF version number
* @program_len: Length reserved for program in the APF work memory
* @addr_offset: Relative address in APF work memory to start writing
* @length: Size of the write
* @buf: Pointer to the buffer
*/
struct wmi_apf_write_memory_params {
uint8_t vdev_id;
uint32_t apf_version;
uint32_t program_len;
uint32_t addr_offset;
uint32_t length;
uint8_t *buf;
};
/**
* struct wmi_apf_read_memory_params - Android Packet Filter read memory params
* @vdev_id: vdev id
* @addr_offset: Relative address in APF work memory to read from
* @length: Size of the memory fetch
*/
struct wmi_apf_read_memory_params {
uint8_t vdev_id;
uint32_t addr_offset;
uint32_t length;
};
/**
* struct wmi_apf_read_memory_resp_event_params - Event containing read Android
* Packet Filter memory response
* @vdev_id: vdev id
* @offset: Read memory offset
* @length: Read memory length
* @more_data: Indicates more data to come
* @data: Pointer to the data
*/
struct wmi_apf_read_memory_resp_event_params {
uint32_t vdev_id;
uint32_t offset;
uint32_t length;
bool more_data;
uint8_t *data;
};
/* Begin of roam scan stats definitions */
#define WMI_ROAM_SCAN_STATS_MAX 5
#define WMI_ROAM_SCAN_STATS_CANDIDATES_MAX 4
#define WMI_ROAM_SCAN_STATS_CHANNELS_MAX 50
/**
* struct wmi_roam_scan_stats_req - Structure to hold roam scan stats request
* @vdev_id: interface id
*/
struct wmi_roam_scan_stats_req {
uint32_t vdev_id;
};
/**
* struct wmi_roam_scan_cand - Roam scan candidates
* @score: score of AP
* @rssi: rssi of the AP
* @freq: center frequency
* @bssid: bssid of AP
*/
struct wmi_roam_scan_cand {
uint32_t score;
uint32_t rssi;
uint32_t freq;
uint8_t bssid[QDF_MAC_ADDR_SIZE];
};
/**
* struct wmi_roam_scan_stats_params - Roam scan details
* @time_stamp: time at which this roam scan happened
* @client_id: id of client which triggered this scan
* @num_scan_chans: number of channels that were scanned as part of this scan
* @scan_freqs: frequencies of the channels that were scanned
* @is_roam_successful: whether a successful roaming happened after this scan
* @old_bssid: bssid to which STA is connected just before this scan
* @new_bssid: bssid to which STA is roamed to in case of successful roaming
* @num_roam_candidates: no.of roam candidates that are being reported
* @roam_candidate: roam scan candidate details
* @trigger_id: reason for triggering this roam or roam scan
* @trigger_value: threshold value related to trigger_id
*/
struct wmi_roam_scan_stats_params {
uint64_t time_stamp;
uint32_t client_id;
uint32_t num_scan_chans;
uint32_t scan_freqs[WMI_ROAM_SCAN_STATS_CHANNELS_MAX];
uint32_t is_roam_successful;
/* Bssid to which STA is connected when the roam scan is triggered */
uint8_t old_bssid[QDF_MAC_ADDR_SIZE];
/*
* Bssid to which STA is connected after roaming. Will be valid only
* if is_roam_successful is true.
*/
uint8_t new_bssid[QDF_MAC_ADDR_SIZE];
/* Number of roam candidates that are being reported in the stats */
uint32_t num_roam_candidates;
struct wmi_roam_scan_cand cand[WMI_ROAM_SCAN_STATS_CANDIDATES_MAX];
uint32_t trigger_id;
uint32_t trigger_value;
};
/**
* struct wmi_roam_scan_stats_res - Roam scan stats response from firmware
* @num_roam_scan: number of roam scans triggered
* @roam_scan: place holder to indicate the array of
* wmi_roam_scan_stats_params followed by this structure
*/
struct wmi_roam_scan_stats_res {
uint32_t num_roam_scans;
struct wmi_roam_scan_stats_params roam_scan[0];
};
/* End of roam scan stats definitions */
/**
* struct wmi_hw_filter_req_params - HW Filter mode parameters
* @vdev: VDEV id
* @enable: True: Enable HW filter, False: Disable
* @mode_bitmap: the hardware filter mode to configure
* @bssid: bss_id for get session.
*/
struct wmi_hw_filter_req_params {
uint8_t vdev_id;
bool enable;
uint8_t mode_bitmap;
struct qdf_mac_addr bssid;
};
#endif /* _WMI_UNIFIED_PARAM_H_ */