| /* |
| * |
| ************************************************************************** |
| ** STMicroelectronics ** |
| ************************************************************************** |
| ** marco.cali@st.com ** |
| ************************************************************************** |
| * * |
| * FW related data * |
| * * |
| ************************************************************************** |
| ************************************************************************** |
| * |
| */ |
| |
| /*! |
| * \file ftsSoftware.h |
| * \brief Contains all the definitions and information related to the IC |
| * from a fw/driver point of view |
| */ |
| |
| |
| #ifndef FTS_SOFTWARE_H |
| #define FTS_SOFTWARE_H |
| #include <linux/types.h> |
| #include "ftsHardware.h" |
| |
| /* signed type */ |
| typedef signed char i8; /* /< basic type that represent one signed byte (or 8 |
| * bits) */ |
| |
| /** |
| * Enumerator which contains all the possible address length expressed in |
| *bytes. |
| */ |
| typedef enum { |
| NO_ADDR = 0, |
| BITS_8 = 1, |
| BITS_16 = 2, |
| BITS_24 = 3, |
| BITS_32 = 4, |
| BITS_40 = 5, |
| BITS_48 = 6, |
| BITS_56 = 7, |
| BITS_64 = 8 |
| } AddrSize; |
| |
| |
| /******************** NEW API *********************/ |
| |
| /* HOST COMMAND */ |
| /** @defgroup host_command Fw Host op codes |
| * Valid op codes for fw commands |
| * @{ |
| */ |
| |
| /** @defgroup scan_mode Scan Mode |
| * @ingroup host_command |
| * Set the scanning mode required according to the parameters |
| * @{ |
| */ |
| #define FTS_CMD_SCAN_MODE 0xA0 /* /< OP Code to set scan mode */ |
| /** @} */ |
| |
| /** @defgroup feat_sel Feature Select |
| * @ingroup host_command |
| * Set the system defined features to enable/disable according the parameters |
| * @{ |
| */ |
| #define FTS_CMD_FEATURE 0xA2 /* /< OP code to set features */ |
| /** @} */ |
| |
| /** @defgroup sys_cmd System Command |
| * @ingroup host_command |
| * Execute a system command to perform core tasks |
| * @{ |
| */ |
| #define FTS_CMD_SYSTEM 0xA4 /* /< OP code to write s system command |
| * */ |
| /** @} */ |
| |
| /** @} */ /* end host_command group */ |
| |
| /* SCAN MODE OPTION (0xA0) */ |
| /* Scan mode selection */ |
| /** @defgroup scan_opt Scan Mode Option |
| * @ingroup scan_mode |
| * Valid scanning modes and their options |
| * @{ |
| */ |
| #define SCAN_MODE_ACTIVE 0x00 /* /< Select the Active scanning mode */ |
| #define SCAN_MODE_LOW_POWER 0x01 /* /< Select the low power scanning mode |
| * */ |
| #define SCAN_MODE_JIG_1 0x02 /* /< Select the Jig test 1 */ |
| #define SCAN_MODE_LOCKED 0x03 /* /< Select the Scan mode which will be |
| * locked */ |
| /** @}*/ |
| |
| /* Active mode option (bitmask) */ |
| /** @defgroup active_bitmask Active Mode Bitmask |
| * @ingroup scan_opt |
| * Bitmask to use to enables the specific scanning with the SCAN_MODE_ACTIVE |
| * option |
| * @{ |
| */ |
| #define ACTIVE_MULTI_TOUCH 0x01 /* /< Bit 0 MS/SS scan */ |
| #define ACTIVE_KEY 0x02 /* /< Bit 1 Key scan */ |
| #define ACTIVE_HOVER 0x04 /* /< Bit 2 Hover scan */ |
| #define ACTIVE_PROXIMITY 0x08 /* /< Bit 3 Proximity scan */ |
| #define ACTIVE_FORCE 0x10 /* /< Bit 4 Force scan */ |
| /** @}*/ |
| |
| /* Locked mode option (locked mode) */ |
| /** @defgroup locked_opt Locked Mode Option |
| * @ingroup scan_opt |
| * Options to enable and lock specific scanning with the SCAN_MODE_LOCKED |
| * option |
| * @{ |
| */ |
| #define LOCKED_ACTIVE 0x00 /* /< Active Scan Mode */ |
| #define LOCKED_HOVER 0x01 /* /< Hover Scan Mode */ |
| #define LOCKED_IDLE 0x02 /* /< Idle Scan Mode */ |
| #define LOCKED_ONLY_SELF 0x03 /* /< Only Self Sense scan mode */ |
| #define LOCKED_ONLY_MUTUAL_0 0x04 /* /< Only Mutual Sense scan mode at |
| * lowest freq */ |
| #define LOCKED_ONLY_MUTUAL_1 0x05 /* /< Only Mutual Sense scan mode */ |
| #define LOCKED_ONLY_MUTUAL_2 0x06 /* /< Only Mutual Sense scan mode */ |
| #define LOCKED_ONLY_MUTUAL_3 0x07 /* /< Only Mutual Sense scan mode at |
| * highest freq */ |
| #define LOCKED_SINGLE_ENDED_ONLY_MUTUAL_0 0x20 /* /< Only Mutual Sense |
| * scan mode at lowest |
| * freq in single ended |
| * mode |
| */ |
| #define LOCKED_LP_DETECT 0x10 /* /< Low Power SS */ |
| #define LOCKED_LP_ACTIVE 0x11 /* /< Low Power MS */ |
| /** @}*/ |
| |
| /* FEATURE SELECT OPTION (0xA2) */ |
| /* Feature Selection */ |
| /** @defgroup feat_opt Feature Selection Option |
| * @ingroup feat_sel |
| * System defined features that can be enable/disable |
| * @{ |
| */ |
| #define FEAT_SEL_GLOVE 0x00 /* /< Glove Mode */ |
| #define FEAT_SEL_COVER 0x01 /* /< Cover Mode */ |
| #define FEAT_SEL_CHARGER 0x02 /* /< Charger Mode */ |
| #define FEAT_SEL_GESTURE 0x03 /* /< Gesture Mode */ |
| #define FEAT_SEL_GRIP 0x04 /* /< Grip Detection */ |
| #define FEAT_SEL_STYLUS 0x07 /* /< Stylus Mode |
| * (this is a driver define, not |
| * available in FW) */ |
| /** @}*/ |
| |
| /* Feature Settings */ |
| #define FEAT_ENABLE 1 /* /< General value to enable a feature |
| * */ |
| #define FEAT_DISABLE 0 /* /< General value to disable a feature |
| * */ |
| |
| |
| /* Charger */ |
| /** @defgroup charger_opt Charger Mode Option |
| * @ingroup feat_sel |
| * Option for Charger Mode, it is a bitmask where the each bit indicate a |
| * different kind of chager |
| * @{ |
| */ |
| #define CHARGER_CABLE 0x01 /* /< normal usb charger */ |
| #define CHARGER_WIRLESS 0x02 /* /< wireless charger */ |
| /** @}*/ |
| |
| /* Gestures */ |
| /** @defgroup gesture_opt Gesture Mode Option |
| * @ingroup feat_sel |
| * Gesture IDs of the predefined gesture recognized by the fw. |
| * The ID represent also the position of the corresponding bit in the gesture |
| * mask |
| * @{ |
| */ |
| #define GEST_ID_UP_1F 0x01 /* /< Bottom to Top line */ |
| #define GEST_ID_DOWN_1F 0x02 /* /< Top to bottom line */ |
| #define GEST_ID_LEFT_1F 0x03 /* /< Right to left line */ |
| #define GEST_ID_RIGHT_1F 0x04 /* /< Left to right line */ |
| #define GEST_ID_DBLTAP 0x05 /* /< Double Tap */ |
| #define GEST_ID_O 0x06 /* /< 'O' */ |
| #define GEST_ID_C 0x07 /* /< 'C' */ |
| #define GEST_ID_M 0x08 /* /< 'M' */ |
| #define GEST_ID_W 0x09 /* /< 'W' */ |
| #define GEST_ID_E 0x0A /* /< 'e' */ |
| #define GEST_ID_L 0x0B /* /< 'L' */ |
| #define GEST_ID_F 0x0C /* /< 'F' */ |
| #define GEST_ID_V 0x0D /* /< 'V' */ |
| #define GEST_ID_AT 0x0E /* /< '@' */ |
| #define GEST_ID_S 0x0F /* /< 'S' */ |
| #define GEST_ID_Z 0x10 /* /< 'Z' */ |
| #define GEST_ID_LEFTBRACE 0x11 /* /< '<' */ |
| #define GEST_ID_RIGHTBRACE 0x12 /* /< '>' */ |
| #define GEST_ID_CARET 0x13 /* /< '^' */ |
| /** @}*/ |
| |
| /* WRYTE SYSTEM COMMAND (0xA4) */ |
| /* System command */ |
| /** @defgroup sys_opt System Command Option |
| * @ingroup sys_cmd |
| * Valid System Command Parameters |
| * @{ |
| */ |
| #define SYS_CMD_SPECIAL 0x00 /* /< Special Commands */ |
| #define SYS_CMD_INT 0x01 /* /< FW Interrupt Control */ |
| #define SYS_CMD_FORCE_CAL 0x02 /* /< Force Calibration */ |
| #define SYS_CMD_CX_TUNING 0x03 /* /< CX initialization */ |
| #define SYS_CMD_ITO 0x04 /* /< ITO test */ |
| #define SYS_CMD_SAVE_FLASH 0x05 /* /< Saving to flash */ |
| #define SYS_CMD_LOAD_DATA 0x06 /* /< Load Host data memory */ |
| #define SYS_CMD_SPECIAL_TUNING 0x08 /* /< Perform some special tuning */ |
| #define SYS_CMD_MP_FLAG 0x0C /* /< Update value of MP flag in RAM */ |
| /** @} */ |
| |
| /* System command settings */ |
| /* Special commands */ |
| /** @defgroup sys_special_opt Special Command Option |
| * @ingroup sys_cmd |
| * Valid special command |
| * @{ |
| */ |
| #define SPECIAL_SYS_RESET 0x00 /* /< System Reset triggered by |
| * the FW */ |
| #define SPECIAL_FIFO_FLUSH 0x01 /* /< Flush of the FIFO */ |
| #define SPECIAL_PANEL_INIT 0x02 /* /< Panel Initialization */ |
| #define SPECIAL_FULL_PANEL_INIT 0x03 /* /< Full panel initialization |
| * */ |
| #define SPECIAL_WRITE_HOST_MEM_TO_FLASH 0x04 /* /< Write */ |
| /** @} */ |
| |
| |
| /* Force Cal and Cx auto tuning */ |
| /** @defgroup forcecal_cx_opt Force Cal and Tuning Option |
| * @ingroup sys_cmd |
| * Valid bitmask for triggering forcecal or performing manual autotune |
| * @{ |
| */ |
| #define CAL_MS_TOUCH 0x01 /* /< Mutual Sense Touch */ |
| #define CAL_MS_LOW_POWER 0x02 /* /< Mutual Sense Touch in low power |
| * mode */ |
| #define CAL_SS_TOUCH 0x04 /* /< Self Sense Touch */ |
| #define CAL_SS_IDLE 0x08 /* /< Self Sense Touch in idle mode */ |
| #define CAL_MS_KEY 0x10 /* /< Mutual Sense Key */ |
| #define CAL_SS_KEY 0x20 /* /< Self Sense Key */ |
| #define CAL_MS_FORCE 0x40 /* /< Mutual Sense Force */ |
| #define CAL_SS_FORCE 0x80 /* /< Self Sense Force */ |
| /** @} */ |
| |
| /* ITO checks (position of the bit in the mask) */ |
| /** @defgroup ito_opt ITO Test Option |
| * @ingroup sys_cmd |
| * Valid option for the ITO test |
| * @{ |
| */ |
| #define ITO_FORCE_OPEN 0x00 /* /< Check if some force channels is |
| * open */ |
| #define ITO_SENSE_OPEN 0x01 /* /< Check if some sense channels is |
| * open */ |
| #define ITO_FORCE_GROUND 0x02 /* /< Check if some force channels is |
| * short to ground */ |
| #define ITO_SENSE_GROUND 0x03 /* /< Check if some sense channels is |
| * short to ground */ |
| #define ITO_FORCE_VDD 0x04 /* /< Check if some force channels is |
| * short to VDD */ |
| #define ITO_SENSE_VDD 0x05 /* /< Check if some sense channels is |
| * short to VDD */ |
| #define ITO_FORCE_FORCE 0x06 /* /< Check force to force channels */ |
| #define ITO_FORCE_SENSE 0x07 /* /< Check force to sense channels */ |
| #define ITO_SENSE_SENSE 0x08 /* /< Check sense to sense channels */ |
| #define ITO_KEY_FORCE_OPEN 0x09 /* /< Check if some force channels used |
| * for the key is open */ |
| #define ITO_KEY_SENSE_OPEN 0x0A /* /< Check if some sense channels used |
| * for the key is open */ |
| /** @}*/ |
| |
| /* Save flash */ |
| /** @defgroup save_opt Save to Flash Option |
| * @ingroup sys_cmd |
| * Valid option for saving data to the Flash |
| * @{ |
| */ |
| #define SAVE_FW_CONF 0x01 /* /< Save the confing to the flash */ |
| #define SAVE_CX 0x02 /* /< Save the CX to the flash */ |
| #define SAVE_PANEL_CONF 0x04 /* /< Save the Panel configuration to the flash |
| * */ |
| /** @}*/ |
| |
| /* Load Data */ |
| /** @defgroup load_opt Load Host Data Option |
| * @ingroup sys_cmd |
| * Valid option to ask to the FW to load host data into the memory |
| * @{ |
| */ |
| #define LOAD_SYS_INFO 0x01 /* /< Load System Info */ |
| #define LOAD_CX_MS_TOUCH 0x10 /* /< Load MS Init Data for |
| * Active Mode */ |
| #define LOAD_CX_MS_LOW_POWER 0x11 /* /< Load MS Init Data for Low |
| * Power Mode */ |
| #define LOAD_CX_SS_TOUCH 0x12 /* /< Load SS Init Data for |
| * Active Mode */ |
| #define LOAD_CX_SS_TOUCH_IDLE 0x13 /* /< Load SS Init Data for Low |
| * Power Mode */ |
| #define LOAD_CX_MS_KEY 0x14 /* /< Load MS Init Data for Key |
| * */ |
| #define LOAD_CX_SS_KEY 0x15 /* /< Load SS Init Data for Key |
| * */ |
| #define LOAD_CX_MS_FORCE 0x16 /* /< Load MS Init Data for |
| * Force */ |
| #define LOAD_CX_SS_FORCE 0x17 /* /< Load SS Init Data for |
| * Force */ |
| #define LOAD_SYNC_FRAME_RAW 0x30 /* /< Load a Synchronized Raw |
| * Frame */ |
| #define LOAD_SYNC_FRAME_FILTER 0x31 /* /< Load a Synchronized Filter |
| * Frame */ |
| #define LOAD_SYNC_FRAME_STRENGTH 0x33 /* /< Load a Synchronized |
| * Strength Frame */ |
| #define LOAD_SYNC_FRAME_BASELINE 0x32 /* /< Load a Synchronized |
| * Baseline Frame */ |
| #define LOAD_PANEL_CX_TOT_MS_TOUCH 0x50 /* /< Load TOT MS Init Data for |
| * Active Mode */ |
| #define LOAD_PANEL_CX_TOT_MS_LOW_POWER 0x51 /* /< Load TOT MS Init Data for |
| * Low Power Mode */ |
| #define LOAD_PANEL_CX_TOT_SS_TOUCH 0x52 /* /< Load TOT SS Init Data for |
| * Active Mode */ |
| #define LOAD_PANEL_CX_TOT_SS_TOUCH_IDLE 0x53 /* /< Load TOT SS Init Data for |
| * Low Power Mode */ |
| #define LOAD_PANEL_CX_TOT_MS_KEY 0x54 /* /< Load TOT MS Init Data for |
| * Key */ |
| #define LOAD_PANEL_CX_TOT_SS_KEY 0x55 /* /< Load TOT SS Init Data for |
| * Key */ |
| #define LOAD_PANEL_CX_TOT_MS_FORCE 0x56 /* /< Load TOT MS Init Data for |
| * Force */ |
| #define LOAD_PANEL_CX_TOT_SS_FORCE 0x57 /* /< Load TOT SS Init Data for |
| * Force */ |
| #define LOAD_SENS_CAL_COEFF 0xC0 /* /< Load Sesitivity |
| * Calibration Coefficients */ |
| #define LOAD_GOLDEN_MUTUAL_RAW 0x80 /* /< Load Goden Mutual Raw Data */ |
| |
| /** @}*/ |
| |
| /* Special Tuning */ |
| /** @defgroup spcl_tun_opt Special Tuning Option |
| * @ingroup sys_cmd |
| * Valid special tuning operations which the fw can perform (bitmask) |
| * @{ |
| */ |
| #define SPECIAL_TUNING_LP_TIMER 0x01 /* /< Perform LP Timer calibration */ |
| #define SPECIAL_TUNING_IOFF 0x02 /* /< Perform Ioff calibration */ |
| |
| /** @}*/ |
| |
| /* EVENT ID */ |
| /** @defgroup events_group FW Event IDs and Types |
| * Event IDs and Types pushed by the FW into the FIFO |
| * @{ |
| */ |
| #define EVT_ID_NOEVENT 0x00 /* /< No Events */ |
| #define EVT_ID_CONTROLLER_READY 0x03 /* /< Controller ready, issued after a |
| * system reset. */ |
| #define EVT_ID_ENTER_POINT 0x13 /* /< Touch enter in the sensing area */ |
| #define EVT_ID_MOTION_POINT 0x23 /* /< Touch motion (a specific touch |
| * changed position) */ |
| #define EVT_ID_LEAVE_POINT 0x33 /* /< Touch leave the sensing area */ |
| #define EVT_ID_STATUS_UPDATE 0x43 /* /< FW report a system condition |
| * change */ |
| #define EVT_ID_USER_REPORT 0x53 /* /< User related events triggered |
| * (keys, gestures, proximity etc) */ |
| #define EVT_ID_DEBUG 0xE3 /* /< Debug Info */ |
| #define EVT_ID_ERROR 0xF3 /* /< Error Event */ |
| |
| /* /< Max number of unique event IDs supported */ |
| #define NUM_EVT_ID (((EVT_ID_ERROR & 0xF0) >> 4) + 1) |
| |
| /** @}*/ |
| |
| /* STATUS TYPE */ |
| /** @defgroup status_type Status Event Types |
| * @ingroup events_group |
| * Types of EVT_ID_STATUS_UPDATE events |
| * @{ |
| */ |
| #define EVT_TYPE_STATUS_ECHO 0x01 /* /< Echo event, |
| * contain the first 5 bytes of |
| * the FW command sent */ |
| #define EVT_TYPE_STATUS_GPIO_CHAR_DET 0x02 /*/< Gpio Charger detected */ |
| #define EVT_TYPE_STATUS_FRAME_DROP 0x03 /* /< Some frame was skipped |
| * during the elaboration */ |
| #define EVT_TYPE_STATUS_FORCE_CAL 0x05 /* /< Force Calibration has |
| * triggered */ |
| #define EVT_TYPE_STATUS_WATER 0x06 /* /< Water Mode */ |
| #define EVT_TYPE_STATUS_SS_RAW_SAT 0x07 /* /< Self Sense data saturated */ |
| #define EVT_TYPE_STATUS_PRE_WAT_DET 0x08 /* /< Previous Water Detect* */ |
| #define EVT_TYPE_STATUS_NOISE 0x09 /* /< Noise Status* */ |
| #define EVT_TYPE_STATUS_STIMPAD 0x0A /* /< Stimpad Status* */ |
| #define EVT_TYPE_STATUS_NO_TOUCH 0x0B /* /< No Touch Status* */ |
| #define EVT_TYPE_STATUS_IDLE 0x0C /* /< Idle Status* */ |
| #define EVT_TYPE_STATUS_PALM_TOUCH 0x0D /* /< Palm Touch Status* */ |
| #define EVT_TYPE_STATUS_GRIP_TOUCH 0x0E /* /< Grip Touch Status* */ |
| #define EVT_TYPE_STATUS_GOLDEN_RAW_VAL 0x0F /* /< Golden Raw |
| * Validation Status */ |
| |
| /** @} */ |
| |
| /* USER TYPE */ |
| /** @defgroup user_type User Event Types |
| * @ingroup events_group |
| * Types of EVT_ID_USER_REPORT events generated by thw FW |
| * @{ |
| */ |
| #define EVT_TYPE_USER_KEY 0x00 /* /< Keys pressed/relesed event report |
| * */ |
| #define EVT_TYPE_USER_PROXIMITY 0x01 /* /< Proximity detection event report |
| * */ |
| #define EVT_TYPE_USER_GESTURE 0x02 /* /< Gesture detection event report */ |
| /** @}*/ |
| |
| /* ERROR TYPE */ |
| /** @defgroup error_type Error Event Types |
| * @ingroup events_group |
| * Types of EVT_ID_ERROR events reported by the FW |
| * @{ |
| */ |
| #define EVT_TYPE_ERROR_HARD_FAULT 0x02 /* /< Hard Fault */ |
| #define EVT_TYPE_ERROR_WATCHDOG 0x06 /* /< Watchdog timer expired */ |
| |
| #define EVT_TYPE_ERROR_CRC_CFG_HEAD 0x20 /* /< CRC error in the Config |
| * Area Header */ |
| #define EVT_TYPE_ERROR_CRC_CFG 0x21 /* /< CRC error in the Config |
| * Area */ |
| #define EVT_TYPE_ERROR_CRC_PANEL_HEAD 0x22 /* /< CRC error in the Panel |
| * Area Header */ |
| #define EVT_TYPE_ERROR_CRC_PANEL 0x23 /* /< CRC error in the Panel |
| * Area */ |
| |
| #define EVT_TYPE_ERROR_ITO_FORCETOGND 0x60 /* /< Force channel/s short to |
| * ground */ |
| #define EVT_TYPE_ERROR_ITO_SENSETOGND 0x61 /* /< Sense channel/s short to |
| * ground */ |
| #define EVT_TYPE_ERROR_ITO_FORCETOVDD 0x62 /* /< Force channel/s short to |
| * VDD */ |
| #define EVT_TYPE_ERROR_ITO_SENSETOVDD 0x63 /* /< Sense channel/s short to |
| * VDD */ |
| #define EVT_TYPE_ERROR_ITO_FORCE_P2P 0x64 /* /< Pin to Pin short Force |
| * channel/s */ |
| #define EVT_TYPE_ERROR_ITO_SENSE_P2P 0x65 /* /< Pin to Pin short Sense |
| * channel/s */ |
| #define EVT_TYPE_ERROR_ITO_FORCEOPEN 0x66 /* /< Force Panel open */ |
| #define EVT_TYPE_ERROR_ITO_SENSEOPEN 0x67 /* /< Sense Panel open */ |
| #define EVT_TYPE_ERROR_ITO_KEYOPEN 0x68 /* /< Key open */ |
| |
| #define EVT_TYPE_ERROR_CRC_CX_HEAD 0xA0 /* /< CRC error in the CX Area |
| * Header */ |
| #define EVT_TYPE_ERROR_CRC_CX 0xA1 /* /< CRC error in the CX Area |
| * */ |
| #define EVT_TYPE_ERROR_FLASH_FAILED 0xA4 /* Flash error, cause unknown */ |
| #define EVT_TYPE_ERROR_CRC_CX_SUB_HEAD 0xA5 /* /< CRC error in the CX |
| * Subsection Area Header */ |
| #define EVT_TYPE_ERROR_CRC_CX_SUB 0xA6 /* /< CRC error in the CX |
| * Subsection Area */ |
| |
| #define EVT_TYPE_ERROR_ESD 0xF0 /* /< ESD error */ |
| |
| #define EVT_TYPE_ERROR_OSC_TRIM 0x24 /* /< OSC Trim error */ |
| #define EVT_TYPE_ERROR_AOFFSET_TRIM 0x29 /* /< Aoffset Trim error */ |
| /** @}*/ |
| |
| |
| /** @defgroup address Chip Address |
| * Collection of HW and SW Addresses useful to collect different kind of data |
| * @{ |
| */ |
| |
| /** @defgroup config_adr SW Address |
| * @ingroup address |
| * Important addresses of data stored into Config memory (and sometimes their |
| * dimensions) |
| * @{ |
| */ |
| #define ADDR_CONFIG_ID 0x0010 /* /< Starting Address of the config ID |
| * */ |
| #define CONFIG_ID_BYTE 2 /* /< Number of bytes of config ID */ |
| #define ADDR_CONFIG_SENSE_LEN 0x0030 /* /< Address where is stored the number |
| * of sense channels */ |
| #define ADDR_CONFIG_FORCE_LEN 0x0031 /* /< Address where is stored the number |
| * of force channels */ |
| #define ADDR_CONFIG_AUTOCAL 0x0040 /* /< Address where is stored the Auto |
| * Calibration register */ |
| #define ADDR_CONFIG_T_CYCLE 0x00ED /* /< Address where is stored the MS T |
| * cycle */ |
| #define ADDR_CONFIG_MNM 0x01F0 /* /< Address where is stored the MNM |
| * register */ |
| #define ADDR_CONFIG_MRN 0x01F1 /* /< Address where is stored the MRN |
| * register */ |
| #define ADDR_CONFIG_R0_CYCLE 0x01F2 /* /< Address where is stored the first |
| * R cycle */ |
| /** @}*/ |
| |
| /** @}*/ |
| |
| /* @defgroup mp_flags MP Flags value |
| * @ingroup mp_test |
| * Specify the MP flags value which are written into the flash after performing |
| * a full panel initialization which pass all the tests. |
| * @{ |
| */ |
| |
| #define MP_FLAG_FACTORY 0xA5 /* /< Full Panel Init done in factory */ |
| #define MP_FLAG_BOOT 0x5A /* /< Full Panel Init done at boot */ |
| #define MP_FLAG_OTHERS 0xFF /* /< Full Panel Init done somewhere |
| * else |
| */ |
| |
| /** @}*/ |
| |
| /** @}*/ |
| |
| /* ERROR INFO */ |
| #define ERROR_DUMP_ROW_SIZE 32 /* /< number of rows of the error memory |
| * */ |
| #define ERROR_DUMP_COL_SIZE 4 /* /< number of bytes for each row of |
| * the error memory */ |
| #define ERROR_DUMP_SIGNATURE 0xFA5005AF /* /< first row signature of a |
| * proper dump */ |
| |
| /* Touch Types */ |
| #define TOUCH_TYPE_INVALID 0x00 /* /< Invalid touch type */ |
| #define TOUCH_TYPE_FINGER 0x01 /* /< Finger touch */ |
| #define TOUCH_TYPE_GLOVE 0x02 /* /< Glove touch */ |
| #define TOUCH_TYPE_STYLUS 0x03 /* /< Stylus touch */ |
| #define TOUCH_TYPE_PALM 0x04 /* /< Palm touch */ |
| #define TOUCH_TYPE_HOVER 0x00 /* /< Hovering touch */ |
| |
| /* Keys code */ |
| #define FTS_KEY_0 0x01 /* /< Key 0 bit */ |
| #define FTS_KEY_1 0x02 /* /< Key 1 bit */ |
| #define FTS_KEY_2 0x04 /* /< Key 2 bit */ |
| #define FTS_KEY_3 0x08 /* /< Key 3 bit */ |
| #define FTS_KEY_4 0x10 /* /< Key 4 bit */ |
| #define FTS_KEY_5 0x20 /* /< Key 5 bit */ |
| #define FTS_KEY_6 0x40 /* /< Key 6 bit */ |
| #define FTS_KEY_7 0x80 /* /< Key 7 bit */ |
| |
| #endif |
