/*
  *
  **************************************************************************
  **                        STMicroelectronics				**
  **************************************************************************
  **                        marco.cali@st.com				**
  **************************************************************************
  *                                                                        *
  *			FTS API for MP test				 **
  *                                                                        *
  **************************************************************************
  **************************************************************************
  *
  */

/*!
  * \file ftsTest.h
  * \brief Contains all the definitions and structs related to the Mass
  *Production Test
  */

#ifndef FTS_TEST_H
#define FTS_TEST_H

#include "ftsSoftware.h"
#include "ftsFrame.h"

#ifndef LIMITS_H_FILE
/* /< Name of the Production Test Limit File */
#define LIMITS_FILE			"stm_fts_production_limits.csv"
#else
#define LIMITS_FILE			"NULL"
#endif

#define WAIT_FOR_FRESH_FRAMES		200	/* /< Time in ms to wait after
						 * start to sensing before
						 * reading a frame */
#define WAIT_AFTER_SENSEOFF		50	/* /< Time in ms to wait after
						 * stop sensing and before
						 * reading a frame from
						 * memory */

#define NO_INIT				0	/* /< No Initialization required
						 *  during the MP */

#define RETRY_INIT_BOOT			3	/* /< number of retry of the
						 * init process at boot */

#define SENS_TEST_NUM_FRAMES		100 /* /< number of frames to read */
#define SENS_TEST_PERC_TARGET_PRECAL	20	/* /< +-% of target value within
						 * all the node of the frames
						 * should be contained */
#define SENS_TEST_PERC_TARGET_POSTCAL	4	/* /< +-% of target value within
						 * should be contained the
						 * avarege of the nodes and the
						 * deltas for each node */

/** @defgroup mp_test Mass Production Test
  * Mass production test API.
  * Mass Production Test (MP) should be executed at least one time in the life
  * of every device \n
  * It used to verify that tit is not present any hardware damage and
  * initialize some value of the chip in order to guarantee the working
  * performance \n
  * The MP test is made up by 3 steps:
  * - ITO test = production_test_ito() \n
  * - Initialization = production_test_initialization() \n
  * - Data Test = production_test_data(),
  * it is possible to select which items test thanks to the TestToDo struct\n
  * To execute the Data Test it is mandatory load some thresholds that
  * are stored in the Limit File.
  * @{
  */

/** @defgroup limit_file Limit File
  * @ingroup mp_test
  * Production Test Limit File is a csv which contains thresholds of the data to
  * test.
  * This file can be loaded from the file system or stored as a header file
  * according to the LIMITS_H_FILE define \n
  * For each selectable test item there can be one or more associated labels
  * which store the corresponding thresholds \n
  * @{
  */
/* LABELS PRODUCTION TEST LIMITS FILE */
/** @defgroup test_labels Test Items Labels
  * @ingroup limit_file
  * Labels present in the Limit File and associated to the test items of
  * TestToDo
  * @{
  */
#define MS_RAW_MIN_MAX			"MS_RAW_DATA_MIN_MAX"
#define MS_RAW_EACH_NODE_MIN		"MS_RAW_DATA_EACH_MIN"
#define MS_RAW_EACH_NODE_MAX		"MS_RAW_DATA_EACH_MAX"
#define MS_RAW_GAP			"MS_RAW_DATA_GAP"
#define MS_RAW_ADJH			"MS_RAW_DATA_ADJ_HORIZONTAL"
#define MS_RAW_ADJV			"MS_RAW_DATA_ADJ_VERTICAL"
#define MS_RAW_ITO_ADJH			"MS_RAW_ITO_DATA_ADJ_HORIZONTAL"
#define MS_RAW_ITO_ADJV			"MS_RAW_ITO_DATA_ADJ_VERTICAL"
#define MS_RAW_ITO_MIN_MAX		"MS_RAW_ITO_MIN_MAX"
#define MS_RAW_ITO_EACH_NODE_MIN	"MS_RAW_ITO_DATA_MIN"
#define MS_RAW_ITO_EACH_NODE_MAX	"MS_RAW_ITO_DATA_MAX"
#define MS_RAW_LP_MIN_MAX		"MS_RAW_LOWPOWER_DATA_MIN_MAX"
#define MS_RAW_LP_EACH_NODE_MIN		"MS_RAW_LOWPOWER_DATA_EACH_MIN"
#define MS_RAW_LP_EACH_NODE_MAX		"MS_RAW_LOWPOWER_DATA_EACH_MAX"
#define MS_RAW_LP_GAP			"MS_RAW_LOWPOWER_DATA_GAP"
#define MS_RAW_LP_ADJH			"MS_RAW_LOWPOWER_DATA_ADJ_HORIZONTAL"
#define MS_RAW_LP_ADJV			"MS_RAW_LOWPOWER_DATA_ADJ_VERTICAL"
#define MS_RAW_ADJH_GAP			"MS_RAW_DATA_ADJ_HORIZONTAL_P2P"
#define MS_RAW_ADJV_GAP			"MS_RAW_DATA_ADJ_VERTICAL_P2P"
#define MS_RAW_ADJ_PEAK			"MS_RAW_DATA_ADJ_PEAK"
#define MS_CX1_MIN_MAX			"MS_TOUCH_ACTIVE_CX1_MIN_MAX"
#define MS_CX2_MAP_MIN			"MS_TOUCH_ACTIVE_CX2_MIN"
#define MS_CX2_MAP_MAX			"MS_TOUCH_ACTIVE_CX2_MAX"
#define MS_CX2_ADJH_MAP_MAX		"MS_TOUCH_ACTIVE_CX2_ADJ_HORIZONTAL"
#define MS_CX2_ADJV_MAP_MAX		"MS_TOUCH_ACTIVE_CX2_ADJ_VERTICAL"
#define MS_TOTAL_CX_MAP_MIN		"MS_TOUCH_ACTIVE_TOTAL_CX_MIN"
#define MS_TOTAL_CX_MAP_MAX		"MS_TOUCH_ACTIVE_TOTAL_CX_MAX"
#define MS_TOTAL_CX_ADJH_MAP_MAX	"MS_TOUCH_ACTIVE_TOTAL_CX_ADJ_HORIZONTAL"
#define MS_TOTAL_CX_ADJV_MAP_MAX	"MS_TOUCH_ACTIVE_TOTAL_CX_ADJ_VERTICAL"
#define MS_CX1_LP_MIN_MAX		"MS_TOUCH_LOWPOWER_CX1_MIN_MAX"
#define MS_CX2_LP_MAP_MIN		"MS_TOUCH_LOWPOWER_CX2_MIN"
#define MS_CX2_LP_MAP_MAX		"MS_TOUCH_LOWPOWER_CX2_MAX"
#define MS_CX2_ADJH_LP_MAP_MAX		"MS_TOUCH_LOWPOWER_CX2_ADJ_HORIZONTAL"
#define MS_CX2_ADJV_LP_MAP_MAX		"MS_TOUCH_LOWPOWER_CX2_ADJ_VERTICAL"
#define MS_TOTAL_CX_LP_MAP_MIN		"MS_TOUCH_LOWPOWER_TOTAL_CX_MIN"
#define MS_TOTAL_CX_LP_MAP_MAX		"MS_TOUCH_LOWPOWER_TOTAL_CX_MAX"
#define MS_TOTAL_CX_ADJH_LP_MAP_MAX "MS_TOUCH_LOWPOWER_TOTAL_CX_ADJ_HORIZONTAL"
#define MS_TOTAL_CX_ADJV_LP_MAP_MAX "MS_TOUCH_LOWPOWER_TOTAL_CX_ADJ_VERTICAL"
#define SS_RAW_FORCE_MIN_MAX		"SS_RAW_DATA_FORCE_MIN_MAX"
#define SS_RAW_FORCE_EACH_NODE_MIN	"SS_RAW_DATA_FORCE_EACH_MIN"
#define SS_RAW_FORCE_EACH_NODE_MAX	"SS_RAW_DATA_FORCE_EACH_MAX"
#define SS_RAW_SENSE_MIN_MAX		"SS_RAW_DATA_SENSE_MIN_MAX"
#define SS_RAW_SENSE_EACH_NODE_MIN	"SS_RAW_DATA_SENSE_EACH_MIN"
#define SS_RAW_SENSE_EACH_NODE_MAX	"SS_RAW_DATA_SENSE_EACH_MAX"
#define SS_RAW_FORCE_GAP		"SS_RAW_DATA_FORCE_GAP"
#define SS_RAW_SENSE_GAP		"SS_RAW_DATA_SENSE_GAP"
#define SS_RAW_LP_FORCE_MIN_MAX		"SS_RAW_LOWPOWER_DATA_FORCE_MIN_MAX"
#define SS_RAW_LP_SENSE_MIN_MAX		"SS_RAW_LOWPOWER_DATA_SENSE_MIN_MAX"
#define SS_RAW_LP_FORCE_EACH_NODE_MIN	"SS_RAW_LOWPOWER_DATA_FORCE_EACH_MIN"
#define SS_RAW_LP_FORCE_EACH_NODE_MAX	"SS_RAW_LOWPOWER_DATA_FORCE_EACH_MAX"
#define SS_RAW_LP_SENSE_MIN_MAX		"SS_RAW_LOWPOWER_DATA_SENSE_MIN_MAX"
#define SS_RAW_LP_SENSE_EACH_NODE_MIN	"SS_RAW_LOWPOWER_DATA_SENSE_EACH_MIN"
#define SS_RAW_LP_SENSE_EACH_NODE_MAX	"SS_RAW_LOWPOWER_DATA_SENSE_EACH_MAX"
#define SS_RAW_LP_FORCE_GAP		"SS_RAW_LOWPOWER_DATA_FORCE_GAP"
#define SS_RAW_LP_SENSE_GAP		"SS_RAW_LOWPOWER_DATA_SENSE_GAP"
#define SS_IX1_FORCE_MIN_MAX		"SS_TOUCH_ACTIVE_IX1_FORCE_MIN_MAX"
#define SS_IX1_SENSE_MIN_MAX		"SS_TOUCH_ACTIVE_IX1_SENSE_MIN_MAX"
#define SS_CX1_FORCE_MIN_MAX		"SS_TOUCH_ACTIVE_CX1_FORCE_MIN_MAX"
#define SS_CX1_SENSE_MIN_MAX		"SS_TOUCH_ACTIVE_CX1_SENSE_MIN_MAX"
#define SS_IX2_FORCE_MAP_MIN		"SS_TOUCH_ACTIVE_IX2_FORCE_MIN"
#define SS_IX2_FORCE_MAP_MAX		"SS_TOUCH_ACTIVE_IX2_FORCE_MAX"
#define SS_IX2_SENSE_MAP_MIN		"SS_TOUCH_ACTIVE_IX2_SENSE_MIN"
#define SS_IX2_SENSE_MAP_MAX		"SS_TOUCH_ACTIVE_IX2_SENSE_MAX"
#define SS_IX2_FORCE_ADJV_MAP_MAX	"SS_TOUCH_ACTIVE_IX2_ADJ_VERTICAL"
#define SS_IX2_SENSE_ADJH_MAP_MAX	"SS_TOUCH_ACTIVE_IX2_ADJ_HORIZONTAL"
#define SS_CX2_FORCE_MAP_MIN		"SS_TOUCH_ACTIVE_CX2_FORCE_MIN"
#define SS_CX2_FORCE_MAP_MAX		"SS_TOUCH_ACTIVE_CX2_FORCE_MAX"
#define SS_CX2_SENSE_MAP_MIN		"SS_TOUCH_ACTIVE_CX2_SENSE_MIN"
#define SS_CX2_SENSE_MAP_MAX		"SS_TOUCH_ACTIVE_CX2_SENSE_MAX"
#define SS_CX2_FORCE_ADJV_MAP_MAX	"SS_TOUCH_ACTIVE_CX2_ADJ_VERTICAL"
#define SS_CX2_SENSE_ADJH_MAP_MAX	"SS_TOUCH_ACTIVE_CX2_ADJ_HORIZONTAL"

/* TOTAL SS */
#define SS_TOTAL_IX_FORCE_MAP_MIN	"SS_TOUCH_ACTIVE_TOTAL_IX_FORCE_MIN"
#define SS_TOTAL_IX_FORCE_MAP_MAX	"SS_TOUCH_ACTIVE_TOTAL_IX_FORCE_MAX"
#define SS_TOTAL_IX_SENSE_MAP_MIN	"SS_TOUCH_ACTIVE_TOTAL_IX_SENSE_MIN"
#define SS_TOTAL_IX_SENSE_MAP_MAX	"SS_TOUCH_ACTIVE_TOTAL_IX_SENSE_MAX"
#define SS_TOTAL_IX_FORCE_ADJV_MAP_MAX	"SS_TOUCH_ACTIVE_TOTAL_IX_ADJ_VERTICAL"
#define SS_TOTAL_IX_SENSE_ADJH_MAP_MAX \
	"SS_TOUCH_ACTIVE_TOTAL_IX_ADJ_HORIZONTAL"
#define SS_TOTAL_CX_FORCE_MAP_MIN	"SS_TOUCH_ACTIVE_TOTAL_CX_FORCE_MIN"
#define SS_TOTAL_CX_FORCE_MAP_MAX	"SS_TOUCH_ACTIVE_TOTAL_CX_FORCE_MAX"
#define SS_TOTAL_CX_SENSE_MAP_MIN	"SS_TOUCH_ACTIVE_TOTAL_CX_SENSE_MIN"
#define SS_TOTAL_CX_SENSE_MAP_MAX	"SS_TOUCH_ACTIVE_TOTAL_CX_SENSE_MAX"
#define SS_TOTAL_CX_FORCE_ADJV_MAP_MAX	"SS_TOUCH_ACTIVE_TOTAL_CX_ADJ_VERTICAL"
#define SS_TOTAL_CX_SENSE_ADJH_MAP_MAX \
	"SS_TOUCH_ACTIVE_TOTAL_CX_ADJ_HORIZONTAL"

/* Idle (LP)  version*/
#define SS_IX1_LP_FORCE_MIN_MAX		"SS_TOUCH_IDLE_IX1_FORCE_MIN_MAX"
#define SS_IX1_LP_SENSE_MIN_MAX		"SS_TOUCH_IDLE_IX1_SENSE_MIN_MAX"
#define SS_CX1_LP_FORCE_MIN_MAX		"SS_TOUCH_IDLE_CX1_FORCE_MIN_MAX"
#define SS_CX1_LP_SENSE_MIN_MAX		"SS_TOUCH_IDLE_CX1_SENSE_MIN_MAX"
#define SS_IX2_LP_FORCE_MAP_MIN		"SS_TOUCH_IDLE_IX2_FORCE_MIN"
#define SS_IX2_LP_FORCE_MAP_MAX		"SS_TOUCH_IDLE_IX2_FORCE_MAX"
#define SS_IX2_LP_SENSE_MAP_MIN		"SS_TOUCH_IDLE_IX2_SENSE_MIN"
#define SS_IX2_LP_SENSE_MAP_MAX		"SS_TOUCH_IDLE_IX2_SENSE_MAX"
#define SS_IX2_LP_FORCE_ADJV_MAP_MAX	"SS_TOUCH_IDLE_IX2_ADJ_VERTICAL"
#define SS_IX2_LP_SENSE_ADJH_MAP_MAX	"SS_TOUCH_IDLE_IX2_ADJ_HORIZONTAL"
#define SS_CX2_LP_FORCE_MAP_MIN		"SS_TOUCH_IDLE_CX2_FORCE_MIN"
#define SS_CX2_LP_FORCE_MAP_MAX		"SS_TOUCH_IDLE_CX2_FORCE_MAX"
#define SS_CX2_LP_SENSE_MAP_MIN		"SS_TOUCH_IDLE_CX2_SENSE_MIN"
#define SS_CX2_LP_SENSE_MAP_MAX		"SS_TOUCH_IDLE_CX2_SENSE_MAX"
#define SS_CX2_LP_FORCE_ADJV_MAP_MAX	"SS_TOUCH_IDLE_CX2_ADJ_VERTICAL"
#define SS_CX2_LP_SENSE_ADJH_MAP_MAX	"SS_TOUCH_IDLE_CX2_ADJ_HORIZONTAL"


/* TOTAL SS */
#define SS_TOTAL_IX_LP_FORCE_MAP_MIN	"SS_TOUCH_IDLE_TOTAL_IX_FORCE_MIN"
#define SS_TOTAL_IX_LP_FORCE_MAP_MAX	"SS_TOUCH_IDLE_TOTAL_IX_FORCE_MAX"
#define SS_TOTAL_IX_LP_SENSE_MAP_MIN	"SS_TOUCH_IDLE_TOTAL_IX_SENSE_MIN"
#define SS_TOTAL_IX_LP_SENSE_MAP_MAX	"SS_TOUCH_IDLE_TOTAL_IX_SENSE_MAX"
#define SS_TOTAL_IX_LP_FORCE_ADJV_MAP_MAX \
	"SS_TOUCH_IDLE_TOTAL_IX_ADJ_VERTICAL"
#define SS_TOTAL_IX_LP_SENSE_ADJH_MAP_MAX \
	"SS_TOUCH_IDLE_TOTAL_IX_ADJ_HORIZONTAL"
#define SS_TOTAL_CX_LP_FORCE_MAP_MIN	"SS_TOUCH_IDLE_TOTAL_CX_FORCE_MIN"
#define SS_TOTAL_CX_LP_FORCE_MAP_MAX	"SS_TOUCH_IDLE_TOTAL_CX_FORCE_MAX"
#define SS_TOTAL_CX_LP_SENSE_MAP_MIN	"SS_TOUCH_IDLE_TOTAL_CX_SENSE_MIN"
#define SS_TOTAL_CX_LP_SENSE_MAP_MAX	"SS_TOUCH_IDLE_TOTAL_CX_SENSE_MAX"
#define SS_TOTAL_CX_LP_FORCE_ADJV_MAP_MAX \
	"SS_TOUCH_IDLE_TOTAL_CX_ADJ_VERTICAL"
#define SS_TOTAL_CX_LP_SENSE_ADJH_MAP_MAX \
	"SS_TOUCH_IDLE_TOTAL_CX_ADJ_HORIZONTAL"

/* KEYS */
#define MS_KEY_RAW_MIN_MAX		"MS_KEY_RAW_DATA_MIN_MAX"
#define MS_KEY_CX1_MIN_MAX		"MS_KEY_CX1_MIN_MAX"
#define MS_KEY_CX2_MAP_MIN		"MS_KEY_CX2_MIN"
#define MS_KEY_CX2_MAP_MAX		"MS_KEY_CX2_MAX"
#define MS_KEY_TOTAL_CX_MAP_MIN		"MS_KEY_TOTAL_CX_MIN"
#define MS_KEY_TOTAL_CX_MAP_MAX		"MS_KEY_TOTAL_CX_MAX"

/* CONSTANT TOTAL IX */
#define SS_IX1_FORCE_W			"IX1_FORCE_W"
#define SS_IX2_FORCE_W			"IX2_FORCE_W"
#define SS_IX1_SENSE_W			"IX1_SENSE_W"
#define SS_IX2_SENSE_W			"IX2_SENSE_W"
/** @}*/


/**
  * Struct used to specify which test perform during the Mass Production Test.
  * For each test item selected in this structure, there should be one or
  * more labels associated in the Limit file from where load the thresholds
  */
typedef struct {
	int MutualRaw;	/* /< MS Raw min/Max test */
	int MutualRawMap;	/* /< MS Raw min/Max test for each node */
	int MutualRawGap;	/* /< MS Raw Gap(max-min) test */
	int MutualRawAdj;	/* /< MS Raw Adjacent test */
	int MutualRawAdjGap;	/* /< MS Raw Adjacent Gap (max-min) test */
	int MutualRawAdjPeak;	/* /< MS Raw Adjacent Peak
				 * max(max(adjv),max(adjh)) test
				 */
	int MutualRawLP;	/* /< MS Low Power Raw min/Max test */
	int MutualRawMapLP;	/* /< MS Low Power Raw min/Max test
				 * for each node
				 */
	int MutualRawGapLP;	/* /< MS Low Power Raw Gap(max-min) test */
	int MutualRawAdjLP;	/* /< MS Low Power Raw Adjacent test */
	int MutualRawAdjITO;	/* /< MS Raw Adjacent test during ITO test */
	int MutualRawMapITO; 	/* /< MS Raw ITO min/Max test */

	int MutualCx1;	/* /< MS Cx1 min/Max test */
	int MutualCx2;	/* /< MS Cx2 min/Max (for each node) test */
	int MutualCx2Adj;	/* /< MS Vertical and Horizontal Adj Cx2 min/Max
				 *  (for each node) test */
	int MutualCxTotal;	/* /< MS Total Cx min/Max (for each node) test
				 * */
	int MutualCxTotalAdj;	/* /< MS Total vertical and Horizontal Adj Cx2
				 * min/Max (for each node) test
				 */

	int MutualCx1LP;	/* /< MS LowPower Cx1 min/Max test */
	int MutualCx2LP;	/* /< MS LowPower Cx2 min/Max (for each node)
				 * test
				 */
	int MutualCx2AdjLP;	/* /< MS LowPower Vertical and Horizontal Adj
				 * Cx2 min/Max
				 * (for each node) test
				 */
	int MutualCxTotalLP;	/* /< MS Total LowPower Cx min/Max
				 * (for each node) test */
	int MutualCxTotalAdjLP;	/* /< MS Total LowPower vertical and Horizontal
				 * Adj Cx2 min/Max (for each node) test
				 */

	int MutualKeyRaw;	/* /< MS Raw Key min/Max test */
	int MutualKeyCx1;	/* /< MS Cx1 Key min/Max test */
	int MutualKeyCx2;	/* /< MS Cx2 Key min/Max (for each node) test */
	int MutualKeyCxTotal;	/* /< MS Total Cx Key min/Max (for each node)
				 * test */

	int SelfForceRaw;	/* /< SS Force Raw min/Max test */
	int SelfForceRawGap;	/* /< SS Force Raw Gap(max-min) test */
	int SelfForceRawMap;	/* /< SS Force Raw min/Max Map test */
	int SelfForceRawLP;	/* /< SS Low Power Force Raw min/Max test */
	int SelfForceRawGapLP; /* /< SS Low Power Force Raw Gap(max-min) test */
	int SelfForceRawMapLP;	/* /< SS Low Power Force Raw min/Max Map test */

	int SelfForceIx1;	/* /< SS Force Ix1 min/Max test */
	int SelfForceIx2;	/* /< SS Force Ix2 min/Max (for each node) test
				 * */
	int SelfForceIx2Adj;	/* /< SS Vertical Adj Force Ix2 min/Max
				 * (for each node) test */
	int SelfForceIxTotal;	/* /< SS Total Force Ix min/Max (for each node)
				 * test */
	int SelfForceIxTotalAdj;	/* /< SS Total Vertical Adj Force Ix
					 * min/Max
					 * (for each node) test */
	int SelfForceCx1;	/* /< SS Force Cx1 min/Max test */
	int SelfForceCx2; /* /< SS Force Cx2 min/Max (for each node) test */
	int SelfForceCx2Adj;	/* /< SS Vertical Adj Force Cx2 min/Max (for
				 * each node) test */
	int SelfForceCxTotal;	/* /< SS Total Force Cx min/Max (for each node)
				 * test */
	int SelfForceCxTotalAdj;	/* /< SS Total Vertical Adj Force Cx
					 * min/Max (for each node) test
					 */

	int SelfForceIx1LP;	/* /< SS LP Force Ix1 min/Max test */
	int SelfForceIx2LP;	/* /< SS LP Force Ix2 min/Max (for each node)
				 *  test
				 */
	int SelfForceIx2AdjLP;	/* /< SS LP Vertical Adj Force Ix2 min/Max
					 * (for each node) test */
	int SelfForceIxTotalLP;	/* /< SS LP Total Force Ix min/Max
				 * (for each node) test
				 */
	int SelfForceIxTotalAdjLP;	/* /< SS LP Total Vertical Adj Force Ix
					 * min/Max (for each node) test
					 */
	int SelfForceCx1LP;	/* /< SS LP Force Cx1 min/Max test */
	int SelfForceCx2LP;	/* /< SS LP Force Cx2 min/Max (for each node)
				 * test
				 */
	int SelfForceCx2AdjLP;	/* /< SS LP Vertical Adj Force Cx2 min/Max (for
				 * each node) test
				 */
	int SelfForceCxTotalLP;	/* /< SS LP Total Force Cx min/Max
				 * (for each node) test
				 */
	int SelfForceCxTotalAdjLP;	/* /< SS LP Total Vertical Adj Force Cx
					 * min/Max (for each node) test
					 */

	int SelfSenseRaw;	/* /< SS Sense Raw min/Max test */
	int SelfSenseRawGap;	/* /< SS Sense Raw Gap(max-min) test */
	int SelfSenseRawMap;	/* /< SS Sense Raw min/Max test for each node */
	int SelfSenseRawLP;	/* /< SS Low Power Sense Raw min/Max test */
	int SelfSenseRawGapLP; /* /< SS Low Power Sense Raw Gap(max-min) test */
	int SelfSenseRawMapLP;	/* /< SS Low Power Sense Raw min/Max test for
				 * each node
				 */

	int SelfSenseIx1;	/* /< SS Sense Ix1 min/Max test */
	int SelfSenseIx2; /* /< SS Sense Ix2 min/Max (for each node) test */
	int SelfSenseIx2Adj;	/* /< SS Horizontal Adj Sense Ix2 min/Max
				  * (for each node) test */
	int SelfSenseIxTotal;	/* /< SS Total Horizontal Sense Ix min/Max
				  * (for each node) test */
	int SelfSenseIxTotalAdj;	/* /< SS Total Horizontal Adj Sense Ix
					 * min/Max
					 * (for each node) test */
	int SelfSenseCx1;	/* /< SS Sense Cx1 min/Max test */
	int SelfSenseCx2; /* /< SS Sense Cx2 min/Max (for each node) test */
	int SelfSenseCx2Adj;	/* /< SS Horizontal Adj Sense Cx2 min/Max
				  * (for each node) test */
	int SelfSenseCxTotal;	/* /< SS Total Sense Cx min/Max (for each node)
				 * test */
	int SelfSenseCxTotalAdj;	/* /< SS Total Horizontal Adj Sense Cx
					 * min/Max
					 * (for each node) test */
	int SelfSenseIx1LP;	/* /< SS LP Sense Ix1 min/Max test */
	int SelfSenseIx2LP; /* /< SS LP Sense Ix2 min/Max (for each node)
			     * test
			     */
	int SelfSenseIx2AdjLP;	/* /< SS LP Horizontal Adj Sense Ix2 min/Max
				 * (for each node) test
				 */
	int SelfSenseIxTotalLP;	/* /< SS LP Total Horizontal Sense Ix min/Max
				 * (for each node) test
				 */
	int SelfSenseIxTotalAdjLP; /* /< SS LP Total Horizontal Adj Sense Ix
				    * min/Max (for each node) test
				    */
	int SelfSenseCx1LP;	/* /< SS LP Sense Cx1 min/Max test */
	int SelfSenseCx2LP; /* /< SS LP Sense Cx2 min/Max (for each node)
			     * test
			     */
	int SelfSenseCx2AdjLP;	/* /< SS LP Horizontal Adj Sense Cx2 min/Max
				 * (for each node) test
				 */
	int SelfSenseCxTotalLP;	/* /< SS LP Total Sense Cx min/Max
				 * (for each node) test
				 */
	int SelfSenseCxTotalAdjLP; /* /< SS LP Total Horizontal Adj Sense Cx
				    * min/Max (for each node) test
				    */
} TestToDo;


#define MAX_LIMIT_FILE_NAME 100	/* /< max number of chars of the limit file name
				 * */

/**
  * Struct which store the data coming from a Production Limit File
  */
typedef struct {
	char *data;	/* /< pointer to an array of char which contains
			  * the content of the Production Limit File */
	int size;	/* /< size of data */
	char name[MAX_LIMIT_FILE_NAME];	/* /< identifier of the source from
					  * where the limits data were loaded
					  * (if loaded from a file it will be
					  * the file name, while if loaded
					  * from .h will be "NULL") */
} LimitFile;


int initTestToDo(void);
/**@}*/

/**@}*/


int computeAdjHoriz(i8 *data, int row, int column, u8 **result);
int computeAdjHorizTotal(short *data, int row, int column, u16 **result);
int computeAdjVert(i8 *data, int row, int column, u8 **result);
int computeAdjVertTotal(short *data, int row, int column, u16 **result);
int computeAdjHorizFromU(u8 *data, int row, int column, u8 **result);
int computeAdjHorizTotalFromU(u16 *data, int row, int column, u16 **result);
int computeAdjVertFromU(u8 *data, int row, int column, u8 **result);
int computeAdjVertTotalFromU(u16 *data, int row, int column, u16 **result);
int checkLimitsMinMax(short *data, int row, int column, int min, int max);
int checkLimitsMap(i8 *data, int row, int column, int *min, int *max);
int checkLimitsMapTotal(short *data, int row, int column, int *min, int *max);
int checkLimitsMapFromU(u8 *data, int row, int column, int *min, int *max);
int checkLimitsMapTotalFromU(u16 *data, int row, int column, int *min,
			     int *max);
int checkLimitsMapAdj(u8 *data, int row, int column, int *max);
int checkLimitsMapAdjTotal(u16 *data, int row, int column, int *max);
int checkLimitsGap(short *data, int row, int column, int threshold);
int checkLimitsGapOffsets(short *data, int row, int column, int threshold,
		int row_start, int column_start, int row_end, int column_end);

/**  @defgroup mp_api MP API
  * @ingroup mp_test
  * Functions to execute the MP test.
  * The parameters of these functions allow to customize their behavior
  * in order to satisfy different scenarios
  * @{
  */
int production_test_ito(const char *path_limits, TestToDo *todo,
			MutualSenseFrame *frame);
int production_test_initialization(u8 type);
int production_test_main(const char *pathThresholds, int stop_on_fail,
			 int saveInit, TestToDo *todo, u8 mpflag);
int production_test_ms_raw(const char *path_limits, int stop_on_fail,
			   TestToDo *todo);
int production_test_ms_raw_lp(const char *path_limits, int stop_on_fail,
			      TestToDo *todo);
int production_test_ms_cx(const char *path_limits, int stop_on_fail,
			  TestToDo *todo);
int production_test_ms_cx_lp(const char *path_limits, int stop_on_fail,
			     TestToDo *todo);
int production_test_ss_raw(const char *path_limits, int stop_on_fail,
			  TestToDo *todo);
int production_test_ss_raw_lp(const char *path_limits, int stop_on_fail,
			      TestToDo *todo);
int production_test_ss_ix_cx(const char *path_limits, int stop_on_fail,
			     TestToDo *todo);
int production_test_ss_ix_cx_lp(const char *path_limits, int stop_on_fail,
			     TestToDo *todo);
int production_test_data(const char *path_limits, int stop_on_fail,
			  TestToDo *todo);
int production_test_ms_key_cx(const char *path_limits, int stop_on_fail,
			      TestToDo *todo);
int production_test_ms_key_raw(const char *path_limits);
/** @}*/

/**
  * @addtogroup limit_file
  * @{
  */
int parseProductionTestLimits(const char *path, LimitFile *file, char *label,
			      int **data, int *row, int *column);
int readLine(char *data, char *line, int size, int *n);
int getLimitsFile(const char *path, LimitFile *file);
int freeLimitsFile(LimitFile *file);
int freeCurrentLimitsFile(void);
/**@}*/

int tp_sensitivity_test_pre_cal_ms(MutualSenseFrame *finalFrame, short target,
				   int percentage);
int tp_sensitivity_test_pre_cal_ss(SelfSenseFrame *finalFrame, short target,
				   int percentage);
int tp_sensitivity_compute_gains(MutualSenseFrame *frame, short target,
				 int saveGain);
int tp_sensitivity_test_post_cal_ms(MutualSenseFrame *finalFrame,
				    MutualSenseFrame *deltas, short target,
				    int percentage, int *mean_normal,
				    int *mean_edge);
int tp_sensitivity_set_scan_mode(u8 scan, int enableGains);
int tp_sensitivity_mode(u8 enter, int saveGain);
int tp_sensitivity_test_std_ms(int numFrames, MutualSenseFrame *std);
#endif