blob: 96ec5179c8a00199e2056ee574c3c55aef37bae3 [file] [log] [blame]
* Freescale MXS LCD Interface (LCDIF)
Required properties:
- compatible: Should be "fsl,<chip>-lcdif". Supported chips include
imx23 and imx28.
- reg: Address and length of the register set for lcdif
- interrupts: Should contain lcdif interrupts
- display : phandle to display node (see below for details)
* display node
Required properties:
- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
- bus-width : number of data lines. Could be <8>, <16>, <18> or <24>.
Required sub-node:
- display-timings : Refer to binding doc display-timing.txt for details.
Examples:
lcdif@80030000 {
compatible = "fsl,imx28-lcdif";
reg = <0x80030000 2000>;
interrupts = <38 86>;
display: display {
bits-per-pixel = <32>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <33500000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <164>;
hback-porch = <89>;
hsync-len = <10>;
vback-porch = <23>;
vfront-porch = <10>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};