| // SPDX-License-Identifier: <GPL-2.0> |
| /* |
| * Copyright (C) 2016 ST Microelectronics S.A. |
| * Copyright (C) 2010 Stollmann E+V GmbH |
| * Copyright (C) 2010 Trusted Logic S.A. |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/version.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/i2c.h> |
| #include <linux/irq.h> |
| #include <linux/jiffies.h> |
| #include <linux/uaccess.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/poll.h> |
| #include <linux/miscdevice.h> |
| #include <linux/spinlock.h> |
| #include <linux/of_gpio.h> |
| #include <linux/workqueue.h> |
| #include <linux/acpi.h> |
| #include <linux/gpio/consumer.h> |
| #include <net/nfc/nci.h> |
| #include <linux/clk.h> |
| #include <soc/google/exynos-pmu-if.h> |
| #include "st21nfc.h" |
| |
| #define MAX_BUFFER_SIZE 260 |
| #define HEADER_LENGTH 3 |
| #define IDLE_CHARACTER 0x7e |
| #define ST21NFC_POWER_STATE_MAX 3 |
| #define WAKEUP_SRC_TIMEOUT (2000) |
| #define EXYNOS_CLK_MASK 0x01 |
| #define EXYNOS_EXTPAD_CONTROL_EN_MASK 0x00010000 |
| |
| #define DRIVER_VERSION "2.0.1A" |
| |
| #define PROP_PWR_MON_RW_ON_NTF nci_opcode_pack(NCI_GID_PROPRIETARY, 5) |
| #define PROP_PWR_MON_RW_OFF_NTF nci_opcode_pack(NCI_GID_PROPRIETARY, 6) |
| |
| /*The enum is used to index a pw_states array, the values matter here*/ |
| enum st21nfc_power_state { |
| ST21NFC_IDLE = 0, |
| ST21NFC_ACTIVE = 1, |
| ST21NFC_ACTIVE_RW = 2 |
| }; |
| |
| static const char *const st21nfc_power_state_name[] = { |
| "IDLE", "ACTIVE", "ACTIVE_RW" |
| }; |
| |
| enum st21nfc_read_state { |
| ST21NFC_HEADER, |
| ST21NFC_PAYLOAD |
| }; |
| |
| struct nfc_sub_power_stats { |
| uint64_t count; |
| uint64_t duration; |
| uint64_t last_entry; |
| uint64_t last_exit; |
| }; |
| |
| struct nfc_sub_power_stats_error { |
| /* error transition header --> payload state machine */ |
| uint64_t header_payload; |
| /* error transition from an active state when not in idle state */ |
| uint64_t active_not_idle; |
| /* error transition from idle state to idle state */ |
| uint64_t idle_to_idle; |
| /* warning transition from active_rw state to idle state */ |
| uint64_t active_rw_to_idle; |
| /* error transition from active state to active state */ |
| uint64_t active_to_active; |
| /* error transition from idle state to active state with notification */ |
| uint64_t idle_to_active_ntf; |
| /* error transition from active_rw state to active_rw state */ |
| uint64_t act_rw_to_act_rw; |
| /* error transition from idle state to */ |
| /* active_rw state with notification */ |
| uint64_t idle_to_active_rw_ntf; |
| }; |
| |
| /* |
| * The member 'polarity_mode' defines |
| * how the wakeup pin is configured and handled. |
| * it can take the following values : |
| * IRQF_TRIGGER_RISING |
| * IRQF_TRIGGER_HIGH |
| */ |
| struct st21nfc_device { |
| wait_queue_head_t read_wq; |
| struct mutex read_mutex; |
| struct mutex pidle_mutex; |
| struct i2c_client *client; |
| struct miscdevice st21nfc_device; |
| uint8_t buffer[MAX_BUFFER_SIZE]; |
| bool irq_enabled; |
| bool irq_wake_up; |
| bool irq_is_attached; |
| bool device_open; /* Is device open? */ |
| spinlock_t irq_enabled_lock; |
| enum st21nfc_power_state pw_current; |
| enum st21nfc_read_state r_state_current; |
| int irq_pw_stats_idle; |
| struct nfc_sub_power_stats pw_states[ST21NFC_POWER_STATE_MAX]; |
| struct nfc_sub_power_stats_error pw_states_err; |
| struct workqueue_struct *st_p_wq; |
| struct work_struct st_p_work; |
| /*Power state shadow copies for reading*/ |
| enum st21nfc_power_state c_pw_current; |
| struct nfc_sub_power_stats c_pw_states[ST21NFC_POWER_STATE_MAX]; |
| struct nfc_sub_power_stats_error c_pw_states_err; |
| |
| /* CLK control */ |
| bool clk_run; |
| struct clk *s_clk; |
| uint8_t pinctrl_en; |
| bool pidle_active_low; |
| int irq_clkreq; |
| |
| /* PMU CLK address */ |
| unsigned int clk_pad; |
| /* PMU CLK EXTPAD_CONTROL_EN*/ |
| bool clk_extpad_ctrl; |
| |
| /* GPIO for NFCC IRQ pin (input) */ |
| struct gpio_desc *gpiod_irq; |
| /* GPIO for NFCC Reset pin (output) */ |
| struct gpio_desc *gpiod_reset; |
| /* GPIO for NFCC CLK_REQ pin (input) */ |
| struct gpio_desc *gpiod_clkreq; |
| /* GPIO for NFCC CLF_MONITOR_PWR (input) */ |
| struct gpio_desc *gpiod_pidle; |
| /* irq_gpio polarity to be used */ |
| unsigned int polarity_mode; |
| }; |
| |
| /* |
| * Routine to enable clock. |
| * this routine can be extended to select from multiple |
| * sources based on clk_src_name. |
| */ |
| static int st21nfc_clock_select(struct st21nfc_device *st21nfc_dev) |
| { |
| int ret = 0; |
| |
| st21nfc_dev->s_clk = clk_get(&st21nfc_dev->client->dev, "nfc_ref_clk"); |
| |
| /* if NULL we assume external crystal and dont fail */ |
| if ((st21nfc_dev->s_clk == NULL) || IS_ERR(st21nfc_dev->s_clk)) |
| return 0; |
| |
| if (st21nfc_dev->clk_run == false) { |
| ret = clk_prepare_enable(st21nfc_dev->s_clk); |
| |
| if (ret) |
| goto err_clk; |
| |
| st21nfc_dev->clk_run = true; |
| } |
| return ret; |
| |
| err_clk: |
| return -EINVAL; |
| } |
| |
| /* |
| * Routine to disable clocks |
| */ |
| static int st21nfc_clock_deselect(struct st21nfc_device *st21nfc_dev) |
| { |
| /* if NULL we assume external crystal and dont fail */ |
| if ((st21nfc_dev->s_clk == NULL) || IS_ERR(st21nfc_dev->s_clk)) |
| return 0; |
| |
| if (st21nfc_dev->clk_run == true) { |
| clk_disable_unprepare(st21nfc_dev->s_clk); |
| st21nfc_dev->clk_run = false; |
| } |
| return 0; |
| } |
| |
| static void st21nfc_exynos_clk_control(struct st21nfc_device *st21nfc_dev, |
| bool enable) |
| { |
| if (st21nfc_dev->clk_extpad_ctrl && st21nfc_dev->clk_pad) { |
| exynos_pmu_update(st21nfc_dev->clk_pad, EXYNOS_EXTPAD_CONTROL_EN_MASK, |
| enable ? EXYNOS_EXTPAD_CONTROL_EN_MASK : 0); |
| } else if (st21nfc_dev->clk_pad) { |
| exynos_pmu_update(st21nfc_dev->clk_pad, EXYNOS_CLK_MASK, enable ? 1 : 0); |
| } |
| } |
| |
| static irqreturn_t st21nfc_clkreq_irq_handler(int irq, void *dev_id) |
| { |
| struct st21nfc_device *st21nfc_dev = dev_id; |
| int value = gpiod_get_value(st21nfc_dev->gpiod_clkreq); |
| |
| if (st21nfc_dev->pinctrl_en) { |
| st21nfc_exynos_clk_control(st21nfc_dev, value ? true : false); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static void st21nfc_disable_irq(struct st21nfc_device *st21nfc_dev) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&st21nfc_dev->irq_enabled_lock, flags); |
| if (st21nfc_dev->irq_enabled) { |
| disable_irq_nosync(st21nfc_dev->client->irq); |
| st21nfc_dev->irq_enabled = false; |
| } |
| spin_unlock_irqrestore(&st21nfc_dev->irq_enabled_lock, flags); |
| } |
| |
| static void st21nfc_enable_irq(struct st21nfc_device *st21nfc_dev) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&st21nfc_dev->irq_enabled_lock, flags); |
| if (!st21nfc_dev->irq_enabled) { |
| st21nfc_dev->irq_enabled = true; |
| enable_irq(st21nfc_dev->client->irq); |
| |
| } |
| spin_unlock_irqrestore(&st21nfc_dev->irq_enabled_lock, flags); |
| } |
| |
| static irqreturn_t st21nfc_dev_irq_handler(int irq, void *dev_id) |
| { |
| struct st21nfc_device *st21nfc_dev = dev_id; |
| |
| if (device_may_wakeup(&st21nfc_dev->client->dev)) |
| pm_wakeup_event(&st21nfc_dev->client->dev, |
| WAKEUP_SRC_TIMEOUT); |
| st21nfc_disable_irq(st21nfc_dev); |
| |
| /* Wake up waiting readers */ |
| wake_up(&st21nfc_dev->read_wq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int st21nfc_loc_set_polaritymode(struct st21nfc_device *st21nfc_dev, |
| int mode) |
| { |
| struct i2c_client *client = st21nfc_dev->client; |
| struct device *dev = &client->dev; |
| unsigned int irq_type; |
| int ret; |
| |
| st21nfc_dev->polarity_mode = mode; |
| /* setup irq_flags */ |
| switch (mode) { |
| case IRQF_TRIGGER_RISING: |
| irq_type = IRQ_TYPE_EDGE_RISING; |
| break; |
| case IRQF_TRIGGER_HIGH: |
| irq_type = IRQ_TYPE_LEVEL_HIGH; |
| break; |
| default: |
| irq_type = IRQ_TYPE_EDGE_RISING; |
| break; |
| } |
| if (st21nfc_dev->irq_is_attached) { |
| devm_free_irq(dev, client->irq, st21nfc_dev); |
| st21nfc_dev->irq_is_attached = false; |
| } |
| ret = irq_set_irq_type(client->irq, irq_type); |
| if (ret) { |
| dev_err(dev, "set_irq_type failed\n"); |
| return -ENODEV; |
| } |
| /* request irq. the irq is set whenever the chip has data available |
| * for reading. it is cleared when all data has been read. |
| */ |
| dev_dbg(dev, "requesting IRQ %d\n", client->irq); |
| st21nfc_dev->irq_enabled = true; |
| |
| ret = devm_request_irq(dev, client->irq, st21nfc_dev_irq_handler, |
| st21nfc_dev->polarity_mode, |
| client->name, st21nfc_dev); |
| if (ret) { |
| dev_err(dev, "devm_request_irq failed\n"); |
| return -ENODEV; |
| } |
| st21nfc_dev->irq_is_attached = true; |
| st21nfc_disable_irq(st21nfc_dev); |
| |
| return ret; |
| } |
| |
| |
| static void st21nfc_power_stats_switch( |
| struct st21nfc_device *st21nfc_dev, uint64_t current_time_ms, |
| enum st21nfc_power_state old_state, enum st21nfc_power_state new_state, |
| bool is_ntf) |
| { |
| mutex_lock(&st21nfc_dev->pidle_mutex); |
| |
| if (new_state == old_state) { |
| if ((st21nfc_dev->pw_states[ST21NFC_IDLE].last_entry != 0) || |
| (old_state != ST21NFC_IDLE)) { |
| dev_err(&st21nfc_dev->client->dev, |
| "Error: Switched from %s to %s!: %llx, ntf=%d\n", |
| st21nfc_power_state_name[old_state], |
| st21nfc_power_state_name[new_state], |
| current_time_ms, is_ntf); |
| if (new_state == ST21NFC_IDLE) |
| st21nfc_dev->pw_states_err.idle_to_idle++; |
| else if (new_state == ST21NFC_ACTIVE) |
| st21nfc_dev->pw_states_err.active_to_active++; |
| else if (new_state == ST21NFC_ACTIVE_RW) |
| st21nfc_dev->pw_states_err.act_rw_to_act_rw++; |
| |
| mutex_unlock(&st21nfc_dev->pidle_mutex); |
| return; |
| } |
| } else if (!is_ntf && |
| new_state == ST21NFC_ACTIVE && |
| old_state != ST21NFC_IDLE) { |
| st21nfc_dev->pw_states_err.active_not_idle++; |
| } else if (!is_ntf && |
| new_state == ST21NFC_IDLE && |
| old_state == ST21NFC_ACTIVE_RW) { |
| st21nfc_dev->pw_states_err.active_rw_to_idle++; |
| } else if (is_ntf && |
| new_state == ST21NFC_ACTIVE && |
| old_state == ST21NFC_IDLE) { |
| st21nfc_dev->pw_states_err.idle_to_active_ntf++; |
| } else if (is_ntf && |
| new_state == ST21NFC_ACTIVE_RW && |
| old_state == ST21NFC_IDLE) { |
| st21nfc_dev->pw_states_err.idle_to_active_rw_ntf++; |
| } |
| |
| dev_dbg(&st21nfc_dev->client->dev, "Switching from %s to %s: %llx, ntf=%d\n", |
| st21nfc_power_state_name[old_state], |
| st21nfc_power_state_name[new_state], current_time_ms, is_ntf); |
| st21nfc_dev->pw_states[old_state].last_exit = current_time_ms; |
| st21nfc_dev->pw_states[old_state].duration += |
| st21nfc_dev->pw_states[old_state].last_exit - |
| st21nfc_dev->pw_states[old_state].last_entry; |
| st21nfc_dev->pw_states[new_state].count++; |
| st21nfc_dev->pw_current = new_state; |
| st21nfc_dev->pw_states[new_state].last_entry = current_time_ms; |
| |
| mutex_unlock(&st21nfc_dev->pidle_mutex); |
| } |
| |
| static void st21nfc_power_stats_idle_signal(struct st21nfc_device *st21nfc_dev) |
| { |
| uint64_t current_time_ms = ktime_to_ms(ktime_get_boottime()); |
| bool is_active = (bool) gpiod_get_value(st21nfc_dev->gpiod_pidle); |
| is_active = st21nfc_dev->pidle_active_low ? !is_active : is_active; |
| |
| st21nfc_power_stats_switch(st21nfc_dev, current_time_ms, |
| st21nfc_dev->pw_current, is_active ? ST21NFC_ACTIVE : ST21NFC_IDLE, |
| false); |
| } |
| |
| static void st21nfc_pstate_wq(struct work_struct *work) |
| { |
| struct st21nfc_device *st21nfc_dev = container_of(work, |
| struct st21nfc_device, |
| st_p_work); |
| |
| st21nfc_power_stats_idle_signal(st21nfc_dev); |
| } |
| |
| static irqreturn_t st21nfc_dev_power_stats_handler(int irq, void *dev_id) |
| { |
| struct st21nfc_device *st21nfc_dev = dev_id; |
| |
| queue_work(st21nfc_dev->st_p_wq, &(st21nfc_dev->st_p_work)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void st21nfc_power_stats_filter( |
| struct st21nfc_device *st21nfc_dev, char *buf, size_t count) |
| { |
| uint64_t current_time_ms = ktime_to_ms(ktime_get_boottime()); |
| __u16 ntf_opcode = nci_opcode(buf); |
| |
| if (IS_ERR(st21nfc_dev->gpiod_pidle)) |
| return; |
| |
| /* In order to avoid counting active state on PAYLOAD where it would |
| * match a possible header, power states are filtered only on NCI |
| * headers. |
| */ |
| if (st21nfc_dev->r_state_current != ST21NFC_HEADER) |
| return; |
| |
| if (count != HEADER_LENGTH) { |
| dev_err(&st21nfc_dev->client->dev, |
| "Warning: expect previous one was idle data\n"); |
| st21nfc_dev->pw_states_err.header_payload++; |
| return; |
| } |
| |
| if (nci_mt(buf) != NCI_MT_NTF_PKT |
| && nci_opcode_gid(ntf_opcode) != NCI_GID_PROPRIETARY) |
| return; |
| |
| switch (ntf_opcode) { |
| case PROP_PWR_MON_RW_OFF_NTF: |
| st21nfc_power_stats_switch(st21nfc_dev, current_time_ms, |
| st21nfc_dev->pw_current, ST21NFC_ACTIVE, true); |
| break; |
| case PROP_PWR_MON_RW_ON_NTF: |
| st21nfc_power_stats_switch(st21nfc_dev, current_time_ms, |
| st21nfc_dev->pw_current, ST21NFC_ACTIVE_RW, true); |
| break; |
| default: |
| return; |
| } |
| return; |
| } |
| |
| static ssize_t st21nfc_dev_read(struct file *filp, char __user *buf, |
| size_t count, loff_t *offset) |
| { |
| struct st21nfc_device *st21nfc_dev = container_of(filp->private_data, |
| struct st21nfc_device, |
| st21nfc_device); |
| int ret, idle = 0; |
| |
| if (count == 0) |
| return 0; |
| |
| if (count > MAX_BUFFER_SIZE) |
| count = MAX_BUFFER_SIZE; |
| |
| dev_dbg(&st21nfc_dev->client->dev, "reading %zu bytes.\n", count); |
| |
| mutex_lock(&st21nfc_dev->read_mutex); |
| |
| /* Read data */ |
| ret = i2c_master_recv(st21nfc_dev->client, st21nfc_dev->buffer, count); |
| if (ret < 0) { |
| dev_err(&st21nfc_dev->client->dev, "i2c_master_recv returned %d\n", ret); |
| mutex_unlock(&st21nfc_dev->read_mutex); |
| return ret; |
| } |
| if (st21nfc_dev->r_state_current == ST21NFC_HEADER) { |
| /* Counting idle index */ |
| for (idle = 0; |
| idle < ret && st21nfc_dev->buffer[idle] == IDLE_CHARACTER; |
| idle++) |
| ; |
| |
| if (idle > 0 && idle < HEADER_LENGTH) { |
| memmove(st21nfc_dev->buffer, |
| st21nfc_dev->buffer + idle, ret - idle); |
| ret = i2c_master_recv(st21nfc_dev->client, |
| st21nfc_dev->buffer + ret - idle, |
| idle); |
| if (ret < 0) { |
| dev_err(&st21nfc_dev->client->dev, |
| "i2c_master_recv returned %d\n", ret); |
| mutex_unlock(&st21nfc_dev->read_mutex); |
| return ret; |
| } |
| ret = count; |
| } |
| } |
| mutex_unlock(&st21nfc_dev->read_mutex); |
| |
| if (ret < 0) { |
| dev_err(&st21nfc_dev->client->dev, "i2c_master_recv returned %d\n", ret); |
| return ret; |
| } |
| if (ret > count) { |
| dev_err(&st21nfc_dev->client->dev, "received too many bytes from i2c (%d)\n", ret); |
| return -EIO; |
| } |
| |
| if (idle < HEADER_LENGTH) { |
| st21nfc_power_stats_filter(st21nfc_dev, st21nfc_dev->buffer, |
| ret); |
| /* change state only if a payload is detected, i.e. size > 0*/ |
| if ((st21nfc_dev->r_state_current == ST21NFC_HEADER) && |
| (st21nfc_dev->buffer[2] > 0)) { |
| st21nfc_dev->r_state_current = ST21NFC_PAYLOAD; |
| dev_dbg(&st21nfc_dev->client->dev, "new state = ST21NFC_PAYLOAD\n"); |
| } else { |
| st21nfc_dev->r_state_current = ST21NFC_HEADER; |
| dev_dbg(&st21nfc_dev->client->dev, "new state = ST21NFC_HEADER\n"); |
| } |
| } |
| |
| if (copy_to_user(buf, st21nfc_dev->buffer, ret)) { |
| dev_warn(&st21nfc_dev->client->dev, "failed to copy to user space\n"); |
| return -EFAULT; |
| } |
| |
| return ret; |
| } |
| |
| static ssize_t st21nfc_dev_write(struct file *filp, const char __user *buf, |
| size_t count, loff_t *offset) |
| { |
| struct st21nfc_device *st21nfc_dev = container_of(filp->private_data, |
| struct st21nfc_device, st21nfc_device); |
| char *tmp = NULL; |
| int ret = count; |
| |
| dev_dbg(&st21nfc_dev->client->dev, "st21nfc_dev ptr %p\n", st21nfc_dev); |
| |
| if (count > MAX_BUFFER_SIZE) |
| count = MAX_BUFFER_SIZE; |
| |
| tmp = memdup_user(buf, count); |
| if (IS_ERR(tmp)) { |
| dev_err(&st21nfc_dev->client->dev, "memdup_user failed\n"); |
| return -EFAULT; |
| } |
| |
| dev_dbg(&st21nfc_dev->client->dev, "writing %zu bytes.\n", count); |
| /* Write data */ |
| ret = i2c_master_send(st21nfc_dev->client, tmp, count); |
| if (ret != count) { |
| dev_err(&st21nfc_dev->client->dev, "i2c_master_send returned %d\n", ret); |
| ret = -EIO; |
| } |
| kfree(tmp); |
| |
| return ret; |
| } |
| |
| static int st21nfc_dev_open(struct inode *inode, struct file *filp) |
| { |
| int ret = 0; |
| struct st21nfc_device *st21nfc_dev = container_of(filp->private_data, |
| struct st21nfc_device, |
| st21nfc_device); |
| |
| if (st21nfc_dev->device_open) { |
| ret = -EBUSY; |
| } else { |
| st21nfc_dev->device_open = true; |
| if (st21nfc_dev->clk_pad) |
| st21nfc_exynos_clk_control(st21nfc_dev, true); |
| } |
| return ret; |
| } |
| |
| |
| static int st21nfc_release(struct inode *inode, struct file *file) |
| { |
| struct st21nfc_device *st21nfc_dev = container_of(file->private_data, |
| struct st21nfc_device, |
| st21nfc_device); |
| |
| st21nfc_dev->device_open = false; |
| if (st21nfc_dev->clk_pad) { |
| st21nfc_exynos_clk_control(st21nfc_dev, false); |
| } |
| return 0; |
| } |
| |
| static long st21nfc_dev_ioctl(struct file *filp, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct st21nfc_device *st21nfc_dev = container_of(filp->private_data, |
| struct st21nfc_device, |
| st21nfc_device); |
| |
| struct i2c_client *client = st21nfc_dev->client; |
| struct device *dev = &client->dev; |
| int ret = 0; |
| |
| switch (cmd) { |
| |
| case ST21NFC_SET_POLARITY_RISING: |
| dev_info(dev, " ### ST21NFC_SET_POLARITY_RISING ###"); |
| st21nfc_loc_set_polaritymode(st21nfc_dev, IRQF_TRIGGER_RISING); |
| break; |
| |
| case ST21NFC_SET_POLARITY_HIGH: |
| dev_info(dev, " ### ST21NFC_SET_POLARITY_HIGH ###"); |
| st21nfc_loc_set_polaritymode(st21nfc_dev, IRQF_TRIGGER_HIGH); |
| break; |
| |
| case ST21NFC_PULSE_RESET: |
| /* Double pulse is done to exit Quick boot mode.*/ |
| if (!IS_ERR(st21nfc_dev->gpiod_reset)) { |
| /* pulse low for 20 millisecs */ |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 0); |
| msleep(20); |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 1); |
| usleep_range(10000, 11000); |
| /* pulse low for 20 millisecs */ |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 0); |
| msleep(20); |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 1); |
| } |
| st21nfc_dev->r_state_current = ST21NFC_HEADER; |
| break; |
| |
| case ST21NFC_GET_WAKEUP: |
| /* deliver state of Wake_up_pin as return value of ioctl */ |
| ret = gpiod_get_value(st21nfc_dev->gpiod_irq); |
| /* |
| * Warning: depending on gpiod_get_value implementation, |
| * it can returns a value different than 1 in case of high level |
| */ |
| if (ret != 0) |
| ret = 1; |
| |
| dev_dbg(&st21nfc_dev->client->dev, "get wakeup result %d\n", ret); |
| break; |
| case ST21NFC_GET_POLARITY: |
| ret = st21nfc_dev->polarity_mode; |
| dev_dbg(&st21nfc_dev->client->dev, "get polarity %d\n", ret); |
| break; |
| case ST21NFC_RECOVERY: |
| /* For ST21NFCD usage only */ |
| dev_info(dev, "Recovery Request\n"); |
| if (!IS_ERR(st21nfc_dev->gpiod_reset)) { |
| /* pulse low for 20 millisecs */ |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 0); |
| usleep_range(10000, 11000); |
| if (st21nfc_dev->irq_is_attached) { |
| devm_free_irq(dev, client->irq, st21nfc_dev); |
| st21nfc_dev->irq_is_attached = false; |
| } |
| /* During the reset, force IRQ OUT as */ |
| /* DH output instead of input in normal usage */ |
| ret = gpiod_direction_output(st21nfc_dev->gpiod_irq, 1); |
| if (ret) { |
| dev_err(&st21nfc_dev->client->dev, |
| "irq gpiod_direction_output failed\n"); |
| ret = -ENODEV; |
| break; |
| } |
| |
| gpiod_set_value(st21nfc_dev->gpiod_irq, 1); |
| usleep_range(10000, 11000); |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 1); |
| |
| dev_info(dev, "recovery pulse request done\n"); |
| } |
| msleep(20); |
| gpiod_set_value(st21nfc_dev->gpiod_irq, 0); |
| msleep(20); |
| gpiod_set_value(st21nfc_dev->gpiod_irq, 1); |
| msleep(20); |
| gpiod_set_value(st21nfc_dev->gpiod_irq, 0); |
| msleep(20); |
| dev_info(dev, "Recovery procedure finished\n"); |
| ret = gpiod_direction_input(st21nfc_dev->gpiod_irq); |
| if (ret) { |
| dev_err(&st21nfc_dev->client->dev, "irq gpiod_direction_input failed\n"); |
| ret = -ENODEV; |
| } |
| break; |
| case ST21NFC_CLK_ENABLE: |
| st21nfc_exynos_clk_control(st21nfc_dev, true); |
| break; |
| case ST21NFC_CLK_DISABLE: |
| st21nfc_exynos_clk_control(st21nfc_dev, false); |
| break; |
| case ST21NFC_CLK_STATE: |
| if (st21nfc_dev->clk_pad == 0 || |
| exynos_pmu_read(st21nfc_dev->clk_pad, &ret) < 0) { |
| ret = -ENODEV; |
| } else { |
| ret &= EXYNOS_CLK_MASK; |
| } |
| break; |
| default: |
| dev_err(&st21nfc_dev->client->dev, "bad ioctl %u\n", cmd); |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static unsigned int st21nfc_poll(struct file *file, poll_table *wait) |
| { |
| struct st21nfc_device *st21nfc_dev = container_of(file->private_data, |
| struct st21nfc_device, |
| st21nfc_device); |
| unsigned int mask = 0; |
| int pinlev = 0; |
| |
| /* wait for Wake_up_pin == high */ |
| poll_wait(file, &st21nfc_dev->read_wq, wait); |
| |
| pinlev = gpiod_get_value(st21nfc_dev->gpiod_irq); |
| |
| if (pinlev != 0) { |
| dev_dbg(&st21nfc_dev->client->dev, "poll return ready\n"); |
| mask = POLLIN | POLLRDNORM; /* signal data avail */ |
| st21nfc_disable_irq(st21nfc_dev); |
| } else { |
| /* Wake_up_pin is low. Activate ISR */ |
| if (!st21nfc_dev->irq_enabled) { |
| dev_dbg(&st21nfc_dev->client->dev, "enable irq\n"); |
| st21nfc_enable_irq(st21nfc_dev); |
| } else { |
| dev_dbg(&st21nfc_dev->client->dev, "irq already enabled\n"); |
| } |
| } |
| return mask; |
| } |
| |
| static const struct file_operations st21nfc_dev_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .read = st21nfc_dev_read, |
| .write = st21nfc_dev_write, |
| .open = st21nfc_dev_open, |
| .poll = st21nfc_poll, |
| .release = st21nfc_release, |
| |
| .unlocked_ioctl = st21nfc_dev_ioctl, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl = st21nfc_dev_ioctl |
| #endif |
| }; |
| |
| static ssize_t i2c_addr_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| |
| if (client != NULL) |
| return scnprintf(buf, PAGE_SIZE, "0x%.2x\n", client->addr); |
| return -ENODEV; |
| } |
| |
| static ssize_t i2c_addr_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct st21nfc_device *data = dev_get_drvdata(dev); |
| long new_addr = 0; |
| |
| if (data != NULL && data->client != NULL) { |
| if (!kstrtol(buf, 10, &new_addr)) { |
| mutex_lock(&data->read_mutex); |
| data->client->addr = new_addr; |
| mutex_unlock(&data->read_mutex); |
| return count; |
| } |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static ssize_t version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return scnprintf(buf, PAGE_SIZE, "%s\n", DRIVER_VERSION); |
| } |
| |
| static uint64_t st21nfc_power_duration(struct st21nfc_device *data, |
| enum st21nfc_power_state pstate, |
| uint64_t current_time_ms) |
| { |
| |
| return data->c_pw_current != pstate ? |
| data->c_pw_states[pstate].duration : |
| data->c_pw_states[pstate].duration + |
| (current_time_ms - data->c_pw_states[pstate].last_entry); |
| } |
| |
| static ssize_t power_stats_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct st21nfc_device *data = dev_get_drvdata(dev); |
| uint64_t current_time_ms; |
| uint64_t idle_duration; |
| uint64_t active_ce_duration; |
| uint64_t active_rw_duration; |
| |
| mutex_lock(&data->pidle_mutex); |
| |
| data->c_pw_current = data->pw_current; |
| data->c_pw_states_err = data->pw_states_err; |
| memcpy(data->c_pw_states, data->pw_states, |
| ST21NFC_POWER_STATE_MAX * sizeof(struct nfc_sub_power_stats)); |
| |
| mutex_unlock(&data->pidle_mutex); |
| |
| current_time_ms = ktime_to_ms(ktime_get_boottime()); |
| idle_duration = st21nfc_power_duration(data, ST21NFC_IDLE, |
| current_time_ms); |
| active_ce_duration = st21nfc_power_duration(data, ST21NFC_ACTIVE, |
| current_time_ms); |
| active_rw_duration = st21nfc_power_duration(data, ST21NFC_ACTIVE_RW, |
| current_time_ms); |
| |
| return scnprintf(buf, PAGE_SIZE, |
| "NFC subsystem\n" |
| "Idle mode:\n" |
| "\tCumulative count: 0x%llx\n" |
| "\tCumulative duration msec: 0x%llx\n" |
| "\tLast entry timestamp msec: 0x%llx\n" |
| "\tLast exit timestamp msec: 0x%llx\n" |
| "Active mode:\n" |
| "\tCumulative count: 0x%llx\n" |
| "\tCumulative duration msec: 0x%llx\n" |
| "\tLast entry timestamp msec: 0x%llx\n" |
| "\tLast exit timestamp msec: 0x%llx\n" |
| "Active Reader/Writer mode:\n" |
| "\tCumulative count: 0x%llx\n" |
| "\tCumulative duration msec: 0x%llx\n" |
| "\tLast entry timestamp msec: 0x%llx\n" |
| "\tLast exit timestamp msec: 0x%llx\n" |
| "\nError transition header --> payload state machine: 0x%llx\n" |
| "Error transition from an Active state when not in Idle state: 0x%llx\n" |
| "Error transition from Idle state to Idle state: 0x%llx\n" |
| "Warning transition from Active Reader/Writer state to Idle state: 0x%llx\n" |
| "Error transition from Active state to Active state: 0x%llx\n" |
| "Error transition from Idle state to Active state with notification: 0x%llx\n" |
| "Error transition from Active Reader/Writer state to Active Reader/Writer state: 0x%llx\n" |
| "Error transition from Idle state to Active Reader/Writer state with notification: 0x%llx\n" |
| "\nTotal uptime: 0x%llx Cumulative modes time: 0x%llx\n", |
| data->c_pw_states[ST21NFC_IDLE].count, |
| idle_duration, |
| data->c_pw_states[ST21NFC_IDLE].last_entry, |
| data->c_pw_states[ST21NFC_IDLE].last_exit, |
| data->c_pw_states[ST21NFC_ACTIVE].count, |
| active_ce_duration, |
| data->c_pw_states[ST21NFC_ACTIVE].last_entry, |
| data->c_pw_states[ST21NFC_ACTIVE].last_exit, |
| data->c_pw_states[ST21NFC_ACTIVE_RW].count, |
| active_rw_duration, |
| data->c_pw_states[ST21NFC_ACTIVE_RW].last_entry, |
| data->c_pw_states[ST21NFC_ACTIVE_RW].last_exit, |
| data->c_pw_states_err.header_payload, |
| data->c_pw_states_err.active_not_idle, |
| data->c_pw_states_err.idle_to_idle, |
| data->c_pw_states_err.active_rw_to_idle, |
| data->c_pw_states_err.active_to_active, |
| data->c_pw_states_err.idle_to_active_ntf, |
| data->c_pw_states_err.act_rw_to_act_rw, |
| data->c_pw_states_err.idle_to_active_rw_ntf, |
| current_time_ms, |
| idle_duration + active_ce_duration + active_rw_duration); |
| } |
| |
| static DEVICE_ATTR_RW(i2c_addr); |
| |
| static DEVICE_ATTR_RO(version); |
| |
| static DEVICE_ATTR_RO(power_stats); |
| |
| static struct attribute *st21nfc_attrs[] = { |
| &dev_attr_i2c_addr.attr, |
| &dev_attr_version.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group st21nfc_attr_grp = { |
| .attrs = st21nfc_attrs, |
| }; |
| |
| static const struct acpi_gpio_params irq_gpios = {0, 0, false }; |
| static const struct acpi_gpio_params reset_gpios = {1, 0, false }; |
| static const struct acpi_gpio_params pidle_gpios = {2, 0, false}; |
| static const struct acpi_gpio_params clkreq_gpios = {3, 0, false}; |
| |
| static const struct acpi_gpio_mapping acpi_st21nfc_gpios[] = { |
| { "irq-gpios", &irq_gpios, 1}, |
| { "reset-gpios", &reset_gpios, 1}, |
| { "pidle-gpios", &pidle_gpios, 1}, |
| { "clkreq-gpios", &clkreq_gpios, 1}, |
| }; |
| |
| static int st21nfc_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int ret; |
| struct st21nfc_device *st21nfc_dev; |
| struct device *dev = &client->dev; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| dev_err(dev, "need I2C_FUNC_I2C\n"); |
| return -ENODEV; |
| } |
| |
| st21nfc_dev = devm_kzalloc(dev, sizeof(*st21nfc_dev), GFP_KERNEL); |
| if (st21nfc_dev == NULL) |
| return -ENOMEM; |
| |
| dev->init_name = "i2c-st21nfc"; |
| |
| /* store for later use */ |
| st21nfc_dev->client = client; |
| st21nfc_dev->r_state_current = ST21NFC_HEADER; |
| client->adapter->retries = 1; |
| |
| ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), |
| acpi_st21nfc_gpios); |
| if (ret) |
| dev_dbg(dev, "Unable to add GPIO mapping table\n"); |
| |
| st21nfc_dev->gpiod_irq = devm_gpiod_get(dev, "irq", GPIOD_IN); |
| if (IS_ERR(st21nfc_dev->gpiod_irq)) { |
| dev_err(dev, "Unable to request irq-gpios\n"); |
| return -ENODEV; |
| } |
| |
| st21nfc_dev->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(st21nfc_dev->gpiod_reset)) { |
| dev_warn(dev, "Unable to request reset-gpios\n"); |
| return -ENODEV; |
| } |
| |
| st21nfc_dev->gpiod_pidle = devm_gpiod_get(dev, "pidle", GPIOD_IN); |
| if (IS_ERR(st21nfc_dev->gpiod_pidle)) { |
| ret = 0; |
| } else { |
| if (!device_property_read_bool(dev, "st,pidle_active_low")) { |
| dev_dbg(dev, "[OPTIONAL] pidle_active_low not set\n"); |
| st21nfc_dev->pidle_active_low = false; |
| } else { |
| dev_dbg(dev, "[OPTIONAL] pidle_active_low set\n"); |
| st21nfc_dev->pidle_active_low = true; |
| } |
| /* Prepare a workqueue for st21nfc_dev_power_stats_handler */ |
| st21nfc_dev->st_p_wq = create_workqueue("st_pstate_work"); |
| if(!st21nfc_dev->st_p_wq) |
| return -ENODEV; |
| mutex_init(&st21nfc_dev->pidle_mutex); |
| INIT_WORK(&(st21nfc_dev->st_p_work), st21nfc_pstate_wq); |
| /* Start the power stat in power mode idle */ |
| st21nfc_dev->irq_pw_stats_idle = |
| gpiod_to_irq(st21nfc_dev->gpiod_pidle); |
| |
| ret = irq_set_irq_type(st21nfc_dev->irq_pw_stats_idle, |
| IRQ_TYPE_EDGE_BOTH); |
| if (ret) { |
| dev_err(dev, "set_irq_type failed\n"); |
| goto err_pidle_workqueue; |
| } |
| |
| /* This next call requests an interrupt line */ |
| ret = devm_request_irq(dev, st21nfc_dev->irq_pw_stats_idle, |
| (irq_handler_t)st21nfc_dev_power_stats_handler, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| /* Interrupt on both edges */ |
| "st21nfc_pw_stats_idle_handle", |
| st21nfc_dev); |
| if (ret) { |
| dev_err(dev, "devm_request_irq for power stats idle failed\n"); |
| goto err_pidle_workqueue; |
| } |
| |
| ret = sysfs_create_file(&dev->kobj, |
| &dev_attr_power_stats.attr); |
| if (ret) { |
| dev_err(dev, "sysfs_create_file for power stats failed\n"); |
| goto err_pidle_workqueue; |
| } |
| } |
| |
| st21nfc_dev->gpiod_clkreq = devm_gpiod_get(dev, "clkreq", GPIOD_IN); |
| /* Try get pmu_clk_pad value*/ |
| if (device_property_read_u32(dev, "pmu_clk_pad", &st21nfc_dev->clk_pad)) { |
| /* No base pmu clk address settings, no system clock required*/ |
| dev_info(dev, "[OPTIONAL] PMU_CLKOUT_PAD offset is unset\n"); |
| st21nfc_dev->clk_pad = 0; |
| st21nfc_dev->clk_extpad_ctrl = false; |
| st21nfc_dev->pinctrl_en = 0; |
| } else if (IS_ERR(st21nfc_dev->gpiod_clkreq)) { |
| ret = 0; |
| /* no clkreq goio, try extpad hw pin ctrl */ |
| if (!device_property_read_bool(dev, "st,extpad_control_en")) { |
| dev_info(dev, "[OPTIONAL] can't find extpad_control_en settings\n"); |
| st21nfc_dev->clk_extpad_ctrl = false; |
| } else { |
| dev_dbg(dev, "[OPTIONAL] clk_extpad_ctrl set\n"); |
| st21nfc_dev->clk_extpad_ctrl = true; |
| } |
| } else { |
| if (!device_property_read_bool(dev, "st,clk_pinctrl")) { |
| dev_dbg(dev, "[OPTIONAL] clk_pinctrl not set\n"); |
| st21nfc_dev->pinctrl_en = 0; |
| } else { |
| dev_dbg(dev, "[OPTIONAL] clk_pinctrl set\n"); |
| st21nfc_dev->pinctrl_en = 1; |
| |
| /* handle clk_req irq */ |
| st21nfc_dev->irq_clkreq = |
| gpiod_to_irq(st21nfc_dev->gpiod_clkreq); |
| |
| ret = irq_set_irq_type(st21nfc_dev->irq_clkreq, |
| IRQ_TYPE_EDGE_BOTH); |
| if (ret) { |
| dev_err(dev, "set_irq_type failed\n"); |
| st21nfc_dev->pinctrl_en = 0; |
| } else { |
| ret = devm_request_irq(dev, |
| st21nfc_dev->irq_clkreq, |
| st21nfc_clkreq_irq_handler, |
| IRQF_TRIGGER_RISING | |
| IRQF_TRIGGER_FALLING, |
| "st21nfc_clkreq_handle", |
| st21nfc_dev); |
| if (ret) { |
| dev_err(dev, "devm_request_irq for clkreq irq failed\n"); |
| st21nfc_dev->pinctrl_en = 0; |
| } |
| } |
| } |
| |
| ret = st21nfc_clock_select(st21nfc_dev); |
| if (ret < 0) { |
| dev_err(dev, "st21nfc_clock_select failed\n"); |
| goto err_sysfs_power_stats; |
| } |
| } |
| |
| client->irq = gpiod_to_irq(st21nfc_dev->gpiod_irq); |
| |
| /* init mutex and queues */ |
| init_waitqueue_head(&st21nfc_dev->read_wq); |
| mutex_init(&st21nfc_dev->read_mutex); |
| spin_lock_init(&st21nfc_dev->irq_enabled_lock); |
| dev_dbg(dev, "debug irq_gpio = %d, client-irq = %d\n", |
| desc_to_gpio(st21nfc_dev->gpiod_irq), client->irq); |
| if (!IS_ERR(st21nfc_dev->gpiod_pidle)) { |
| dev_dbg(dev, "pidle_gpio = %d\n", |
| desc_to_gpio(st21nfc_dev->gpiod_pidle)); |
| } |
| if (!IS_ERR(st21nfc_dev->gpiod_clkreq)) { |
| dev_dbg(dev, "clkreq_gpio = %d\n", desc_to_gpio(st21nfc_dev->gpiod_clkreq)); |
| } |
| st21nfc_dev->st21nfc_device.minor = MISC_DYNAMIC_MINOR; |
| st21nfc_dev->st21nfc_device.name = "st21nfc"; |
| st21nfc_dev->st21nfc_device.fops = &st21nfc_dev_fops; |
| st21nfc_dev->st21nfc_device.parent = dev; |
| |
| i2c_set_clientdata(client, st21nfc_dev); |
| ret = misc_register(&st21nfc_dev->st21nfc_device); |
| if (ret) { |
| dev_err(dev, "misc_register failed\n"); |
| goto err_misc_register; |
| } |
| |
| ret = sysfs_create_group(&dev->kobj, &st21nfc_attr_grp); |
| if (ret) { |
| dev_err(dev, "sysfs_create_group failed\n"); |
| goto err_sysfs_create_group_failed; |
| } |
| device_init_wakeup(&client->dev, true); |
| device_set_wakeup_capable(&client->dev, true); |
| st21nfc_dev->irq_wake_up = false; |
| |
| return 0; |
| |
| err_sysfs_create_group_failed: |
| misc_deregister(&st21nfc_dev->st21nfc_device); |
| err_misc_register: |
| mutex_destroy(&st21nfc_dev->read_mutex); |
| err_sysfs_power_stats: |
| if (!IS_ERR(st21nfc_dev->gpiod_pidle)) { |
| sysfs_remove_file(&client->dev.kobj, |
| &dev_attr_power_stats.attr); |
| } |
| err_pidle_workqueue: |
| if (!IS_ERR(st21nfc_dev->gpiod_pidle)) { |
| mutex_destroy(&st21nfc_dev->pidle_mutex); |
| destroy_workqueue(st21nfc_dev->st_p_wq); |
| } |
| return ret; |
| } |
| |
| static void st21nfc_remove(struct i2c_client *client) |
| { |
| struct st21nfc_device *st21nfc_dev = i2c_get_clientdata(client); |
| |
| st21nfc_clock_deselect(st21nfc_dev); |
| misc_deregister(&st21nfc_dev->st21nfc_device); |
| if (!IS_ERR(st21nfc_dev->gpiod_pidle)) { |
| sysfs_remove_file(&client->dev.kobj, |
| &dev_attr_power_stats.attr); |
| mutex_destroy(&st21nfc_dev->pidle_mutex); |
| } |
| sysfs_remove_group(&client->dev.kobj, &st21nfc_attr_grp); |
| mutex_destroy(&st21nfc_dev->read_mutex); |
| acpi_dev_remove_driver_gpios(ACPI_COMPANION(&client->dev)); |
| } |
| |
| static int st21nfc_suspend(struct device *device) |
| { |
| struct i2c_client *client = to_i2c_client(device); |
| struct st21nfc_device *st21nfc_dev = i2c_get_clientdata(client); |
| |
| if (device_may_wakeup(&client->dev) && st21nfc_dev->irq_enabled) { |
| if (!enable_irq_wake(client->irq)) |
| st21nfc_dev->irq_wake_up = true; |
| } |
| |
| return 0; |
| } |
| |
| static int st21nfc_resume(struct device *device) |
| { |
| struct i2c_client *client = to_i2c_client(device); |
| struct st21nfc_device *st21nfc_dev = i2c_get_clientdata(client); |
| |
| if (device_may_wakeup(&client->dev) && st21nfc_dev->irq_wake_up) { |
| if (!disable_irq_wake(client->irq)) |
| st21nfc_dev->irq_wake_up = false; |
| } |
| |
| if (!IS_ERR(st21nfc_dev->gpiod_pidle)) { |
| bool is_active = (bool) gpiod_get_value(st21nfc_dev->gpiod_pidle); |
| is_active = st21nfc_dev->pidle_active_low ? !is_active : is_active; |
| if((st21nfc_dev->pw_current == ST21NFC_IDLE && is_active) || |
| (st21nfc_dev->pw_current == ST21NFC_ACTIVE && !is_active)) { |
| queue_work(st21nfc_dev->st_p_wq, |
| &(st21nfc_dev->st_p_work)); |
| } |
| } |
| return 0; |
| } |
| |
| |
| static const struct i2c_device_id st21nfc_id[] = { |
| {"st21nfc", 0}, |
| {} |
| }; |
| |
| static const struct of_device_id st21nfc_of_match[] = { |
| { .compatible = "st,st21nfc", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, st21nfc_of_match); |
| |
| static const struct dev_pm_ops st21nfc_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(st21nfc_suspend, st21nfc_resume) |
| }; |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id st21nfc_acpi_match[] = { |
| {"SMO2104"}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(acpi, st21nfc_acpi_match); |
| #endif |
| |
| static struct i2c_driver st21nfc_driver = { |
| .id_table = st21nfc_id, |
| .driver = { |
| .name = "st21nfc", |
| .owner = THIS_MODULE, |
| .of_match_table = st21nfc_of_match, |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .pm = &st21nfc_pm_ops, |
| .acpi_match_table = ACPI_PTR(st21nfc_acpi_match), |
| }, |
| .probe = st21nfc_probe, |
| .remove = st21nfc_remove, |
| }; |
| |
| #ifdef GKI_MODULE |
| module_i2c_driver(st21nfc_driver); |
| #else |
| /* |
| * module load/unload record keeping |
| */ |
| |
| static int __init st21nfc_dev_init(void) |
| { |
| pr_info("%s: Loading st21nfc driver (version %s)\n", |
| __func__, DRIVER_VERSION); |
| return i2c_add_driver(&st21nfc_driver); |
| } |
| |
| module_init(st21nfc_dev_init); |
| |
| static void __exit st21nfc_dev_exit(void) |
| { |
| pr_debug("Unloading st21nfc driver\n"); |
| i2c_del_driver(&st21nfc_driver); |
| } |
| |
| module_exit(st21nfc_dev_exit); |
| #endif |
| |
| MODULE_AUTHOR("STMicroelectronics"); |
| MODULE_DESCRIPTION("NFC ST21NFC driver"); |
| MODULE_VERSION(DRIVER_VERSION); |
| MODULE_LICENSE("GPL"); |