panel: nt37290: support auto mode on EVT1.1
After EVT1.1, we introduce two gamma bands for 120Hz and lower
refresh rates (60~10Hz) respectively to reduce flickers. This
change also remove the 120Hz frames for auto frame insertion
because the 120Hz gamma band is applied at 120Hz only. Current
idle mode already supports the switch, i.e. changing to 120Hz
manual while active and sending early exit and frame insertion
commands after idle for a while (hibernation). And the gamma
band is updated during these two states.
Bug: 217743207
Test: HW measurement for active and idle states
Change-Id: Ia1b03eee31cfc7da37b4c69841594f6ff890932e
Signed-off-by: Chris Lu <luchris@google.com>
1 file changed
