Google Git
Sign in
android/kernel/common/refs/tags/android15-6.6-2024-10_r17
tag
7620fc1e44bebdfe9caf3da973dc82feed370ced
tagger
Howard Chen <howardsoc@google.com>
Wed Jan 08 12:12:04 2025 +0800
object
f75a02b4fdb97182838a2a454cc2f36e01a3dd85
android15-6.6 October 2024 release 17

Artifacts:
  https://ci.android.com/builds/submitted/12878757/kernel_aarch64/latest
commit
f75a02b4fdb97182838a2a454cc2f36e01a3dd85
[log]
author
Akash M <akash.m5@samsung.com>
Thu Dec 19 18:22:19 2024 +0530
committer
Venkatesh G (xWF) <gvenka@google.com>
Mon Jan 06 19:22:46 2025 -0800
tree
2a1012ff89b0b86201f8cc5fef9e9ec02277ca89
parent
e113a078a37b6ea51bba54e53ec579cc3e0acc34 [diff]
FROMGIT: usb: gadget: f_fs: Remove WARN_ON in functionfs_bind

This commit addresses an issue related to below kernel panic where
panic_on_warn is enabled. It is caused by the unnecessary use of WARN_ON
in functionsfs_bind, which easily leads to the following scenarios.

1.adb_write in adbd               2. UDC write via configfs
  =================	             =====================

->usb_ffs_open_thread()           ->UDC write
 ->open_functionfs()               ->configfs_write_iter()
  ->adb_open()                      ->gadget_dev_desc_UDC_store()
   ->adb_write()                     ->usb_gadget_register_driver_owner
                                      ->driver_register()
->StartMonitor()                       ->bus_add_driver()
 ->adb_read()                           ->gadget_bind_driver()
<times-out without BIND event>           ->configfs_composite_bind()
                                          ->usb_add_function()
->open_functionfs()                        ->ffs_func_bind()
 ->adb_open()                               ->functionfs_bind()
                                       <ffs->state !=FFS_ACTIVE>

The adb_open, adb_read, and adb_write operations are invoked from the
daemon, but trying to bind the function is a process that is invoked by
UDC write through configfs, which opens up the possibility of a race
condition between the two paths. In this race scenario, the kernel panic
occurs due to the WARN_ON from functionfs_bind when panic_on_warn is
enabled. This commit fixes the kernel panic by removing the unnecessary
WARN_ON.

Kernel panic - not syncing: kernel: panic_on_warn set ...
[   14.542395] Call trace:
[   14.542464]  ffs_func_bind+0x1c8/0x14a8
[   14.542468]  usb_add_function+0xcc/0x1f0
[   14.542473]  configfs_composite_bind+0x468/0x588
[   14.542478]  gadget_bind_driver+0x108/0x27c
[   14.542483]  really_probe+0x190/0x374
[   14.542488]  __driver_probe_device+0xa0/0x12c
[   14.542492]  driver_probe_device+0x3c/0x220
[   14.542498]  __driver_attach+0x11c/0x1fc
[   14.542502]  bus_for_each_dev+0x104/0x160
[   14.542506]  driver_attach+0x24/0x34
[   14.542510]  bus_add_driver+0x154/0x270
[   14.542514]  driver_register+0x68/0x104
[   14.542518]  usb_gadget_register_driver_owner+0x48/0xf4
[   14.542523]  gadget_dev_desc_UDC_store+0xf8/0x144
[   14.542526]  configfs_write_iter+0xf0/0x138

Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Akash M <akash.m5@samsung.com>
Link: https://lore.kernel.org/r/20241219125221.1679-1-akash.m5@samsung.c
om
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bug: 383235079
Bug: 388127777
(cherry picked from commit dfc51e48bca475bbee984e90f33fdc537ce09699
https: //git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/
usb-linus)
Change-Id: Ib8ec6cbac0ac0601f75ede2911f00baef099cec1
Signed-off-by: Akash M <akash.m5@samsung.com>
1 file changed
tree: 2a1012ff89b0b86201f8cc5fef9e9ec02277ca89
  1. android/
  2. arch/
  3. block/
  4. certs/
  5. crypto/
  6. Documentation/
  7. drivers/
  8. fs/
  9. include/
  10. init/
  11. io_uring/
  12. ipc/
  13. kernel/
  14. lib/
  15. LICENSES/
  16. mm/
  17. net/
  18. rust/
  19. samples/
  20. scripts/
  21. security/
  22. sound/
  23. tools/
  24. usr/
  25. virt/
  26. .clang-format
  27. .cocciconfig
  28. .get_maintainer.ignore
  29. .gitattributes
  30. .gitignore
  31. .mailmap
  32. .rustfmt.toml
  33. abi.bzl
  34. BUILD.bazel
  35. build.config.aarch64
  36. build.config.allmodconfig
  37. build.config.allmodconfig.aarch64
  38. build.config.allmodconfig.arm
  39. build.config.allmodconfig.x86_64
  40. build.config.amlogic
  41. build.config.arm
  42. build.config.common
  43. build.config.constants
  44. build.config.crashdump
  45. build.config.crashdump.aarch64
  46. build.config.crashdump.x86_64
  47. build.config.db845c
  48. build.config.gki
  49. build.config.gki.aarch64
  50. build.config.gki.aarch64.fips140
  51. build.config.gki.x86_64
  52. build.config.gki_kasan
  53. build.config.gki_kasan.aarch64
  54. build.config.gki_kasan.x86_64
  55. build.config.gki_kprobes
  56. build.config.gki_kprobes.aarch64
  57. build.config.gki_kprobes.x86_64
  58. build.config.khwasan
  59. build.config.kunit.aarch64
  60. build.config.kunit.x86_64
  61. build.config.microdroid
  62. build.config.microdroid.aarch64
  63. build.config.microdroid.x86_64
  64. build.config.rockpi4
  65. build.config.x86_64
  66. COPYING
  67. CREDITS
  68. Kbuild
  69. Kconfig
  70. Kconfig.ext
  71. MAINTAINERS
  72. Makefile
  73. modules.bzl
  74. OWNERS
  75. README
  76. README.md
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not a persuasive case.

  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass scripts/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)