Google Git
Sign in
android / kernel / common / refs/tags/android14-6.1-2024-10_r5
tagd80b238f5ada1988554c9790dd79096f30f1bb8b
taggerHoward Chen <howardsoc@google.com>Thu Oct 31 13:22:53 2024 +0800
object79ec6ca15bc2b10302ca48936470dfec94b3f329 
android14-6.1 October 2024 release 5

Artifacts:
  https://ci.android.com/builds/submitted/12580819/kernel_aarch64/latest
commit79ec6ca15bc2b10302ca48936470dfec94b3f329[log] [tgz]
authorDouglas Anderson <dianders@chromium.org>Mon Mar 04 17:49:53 2024 -0800
committerPraveen Talari <quic_ptalari@quicinc.com>Wed Oct 30 12:01:18 2024 +0530
tree6bf3d34ff0b87f9bd82e3ab9335b18d34acdd6b4
parentf709a0dc33857ae10ce47f08be2be9e2e7f976a5 [diff]
UPSTREAM: Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()"

This reverts commit 5c7e105cd156fc9adf5294a83623d7a40c15f9b9.

As identified by KASAN, the simplification done by the cleanup patch
was not legal.

>From tracing through the code, it can be seen that we're transmitting
from a 4096-byte circular buffer. We copy anywhere from 1-4 bytes from
it each time. The simplification runs into trouble when we get near
the end of the circular buffer. For instance, we might start out with
xmit->tail = 4094 and we want to transfer 4 bytes. With the code
before simplification this was no problem. We'd read buf[4094],
buf[4095], buf[0], and buf[1]. With the new code we'll do a
memcpy(&buf[4094], 4) which reads 2 bytes past the end of the buffer
and then skips transmitting what's at buf[0] and buf[1].

KASAN isn't 100% consistent at reporting this for me, but to be extra
confident in the analysis, I added traces of the tail and tx_bytes and
then wrote a test program:

  while true; do
    echo -n "abcdefghijklmnopqrstuvwxyz0" > /dev/ttyMSM0
    sleep .1
  done

I watched the traces over SSH and saw:
  qcom_geni_serial_send_chunk_fifo: 4093 4
  qcom_geni_serial_send_chunk_fifo: 1 3

Which indicated that one byte should be missing. Sure enough the
output that should have been:

  abcdefghijklmnopqrstuvwxyz0

In one case was actually missing a byte:

  abcdefghijklmnopqrstuvwyz0

Running "ls -al" on large directories also made the missing bytes
obvious since columns didn't line up.

While the original code may not be the most elegant, we only talking
about copying up to 4 bytes here. Let's just go back to the code that
worked.

Fixes: 5c7e105cd156 ("tty: serial: simplify qcom_geni_serial_send_chunk_fifo()")
Cc: stable <stable@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240304174952.1.I920a314049b345efd1f69d708e7f74d2213d0b49@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bug: 370629635
Bug: 375550406
Change-Id: I0946e0e50b0433da1d926f5778dbe7b8a651f72b
(cherry picked from commit 3d9319c27ceb35fa3d2c8b15508967f3fc7e5b78)
Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com>
(cherry picked from commit a874ed06eb34e9a049fed6f767519de9f38130bd)
1 file changed
tree: 6bf3d34ff0b87f9bd82e3ab9335b18d34acdd6b4
  1. android/
  2. arch/
  3. block/
  4. certs/
  5. crypto/
  6. Documentation/
  7. drivers/
  8. fs/
  9. include/
  10. init/
  11. io_uring/
  12. ipc/
  13. kernel/
  14. lib/
  15. LICENSES/
  16. mm/
  17. net/
  18. rust/
  19. samples/
  20. scripts/
  21. security/
  22. sound/
  23. tools/
  24. usr/
  25. virt/
  26. .clang-format
  27. .cocciconfig
  28. .get_maintainer.ignore
  29. .gitattributes
  30. .gitignore
  31. .mailmap
  32. .rustfmt.toml
  33. BUILD.bazel
  34. build.config.aarch64
  35. build.config.allmodconfig
  36. build.config.allmodconfig.aarch64
  37. build.config.allmodconfig.arm
  38. build.config.allmodconfig.x86_64
  39. build.config.amlogic
  40. build.config.arm
  41. build.config.common
  42. build.config.constants
  43. build.config.crashdump
  44. build.config.crashdump.aarch64
  45. build.config.crashdump.x86_64
  46. build.config.db845c
  47. build.config.gki
  48. build.config.gki-debug.aarch64
  49. build.config.gki-debug.x86_64
  50. build.config.gki.aarch64
  51. build.config.gki.aarch64.fips140
  52. build.config.gki.riscv64
  53. build.config.gki.x86_64
  54. build.config.gki_kasan
  55. build.config.gki_kasan.aarch64
  56. build.config.gki_kasan.x86_64
  57. build.config.gki_kprobes
  58. build.config.gki_kprobes.aarch64
  59. build.config.gki_kprobes.x86_64
  60. build.config.khwasan
  61. build.config.microdroid
  62. build.config.microdroid.aarch64
  63. build.config.microdroid.x86_64
  64. build.config.riscv64
  65. build.config.rockchip
  66. build.config.rockpi4
  67. build.config.x86_64
  68. COPYING
  69. CREDITS
  70. Kbuild
  71. Kconfig
  72. Kconfig.ext
  73. MAINTAINERS
  74. Makefile
  75. modules.bzl
  76. OWNERS
  77. README
  78. README.md
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.

  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass scripts/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)