Merge 5.10.148 into android13-5.10-lts

Changes in 5.10.148
	nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()
	nilfs2: fix use-after-free bug of struct nilfs_root
	nilfs2: fix leak of nilfs_root in case of writer thread creation failure
	nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
	ceph: don't truncate file in atomic_open
	Makefile.extrawarn: Move -Wcast-function-type-strict to W=1
	docs: update mediator information in CoC docs
	perf tools: Fixup get_current_dir_name() compilation
	xsk: Inherit need_wakeup flag for shared sockets
	ALSA: pcm: oss: Fix race at SNDCTL_DSP_SYNC
	mm: gup: fix the fast GUP race against THP collapse
	powerpc/64s/radix: don't need to broadcast IPI for radix pmd collapse flush
	fs: fix UAF/GPF bug in nilfs_mdt_destroy
	compiler_attributes.h: move __compiletime_{error|warning}
	firmware: arm_scmi: Add SCMI PM driver remove routine
	dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling
	dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property
	dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure
	ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer
	scsi: qedf: Fix a UAF bug in __qedf_probe()
	net/ieee802154: fix uninit value bug in dgram_sendmsg
	ALSA: hda/hdmi: Fix the converter reuse for the silent stream
	um: Cleanup syscall_handler_t cast in syscalls_32.h
	um: Cleanup compiler warning in arch/x86/um/tls_32.c
	arch: um: Mark the stack non-executable to fix a binutils warning
	net: atlantic: fix potential memory leak in aq_ndev_close()
	drm/amd/display: update gamut remap if plane has changed
	drm/amd/display: skip audio setup when audio stream is enabled
	mmc: core: Replace with already defined values for readability
	mmc: core: Terminate infinite loop in SD-UHS voltage switch
	usb: mon: make mmapped memory read only
	USB: serial: ftdi_sio: fix 300 bps rate for SIO
	rpmsg: qcom: glink: replace strncpy() with strscpy_pad()
	Revert "clk: ti: Stop using legacy clkctrl names for omap4 and 5"
	random: restore O_NONBLOCK support
	random: clamp credited irq bits to maximum mixed
	ALSA: hda: Fix position reporting on Poulsbo
	efi: Correct Macmini DMI match in uefi cert quirk
	scsi: stex: Properly zero out the passthrough command structure
	USB: serial: qcserial: add new usb-id for Dell branded EM7455
	random: avoid reading two cache lines on irq randomness
	random: use expired timer rather than wq for mixing fast pool
	wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans()
	wifi: cfg80211/mac80211: reject bad MBSSID elements
	wifi: cfg80211: ensure length byte is present before access
	wifi: cfg80211: fix BSS refcounting bugs
	wifi: cfg80211: avoid nontransmitted BSS list corruption
	wifi: mac80211_hwsim: avoid mac80211 warning on bad rate
	wifi: mac80211: fix crash in beacon protection for P2P-device
	wifi: cfg80211: update hidden BSSes to avoid WARN_ON
	Input: xpad - add supported devices as contributed on github
	Input: xpad - fix wireless 360 controller breaking after suspend
	misc: pci_endpoint_test: Aggregate params checking for xfer
	misc: pci_endpoint_test: Fix pci_endpoint_test_{copy,write,read}() panic
	Linux 5.10.148

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id28998f294cd02427ea692783de8f361f66f0830
tree: 977f0978f971982dc87e495a4ad931465e3affb8
  1. android/
  2. arch/
  3. block/
  4. certs/
  5. crypto/
  6. Documentation/
  7. drivers/
  8. fs/
  9. include/
  10. init/
  11. ipc/
  12. kernel/
  13. lib/
  14. LICENSES/
  15. mm/
  16. net/
  17. samples/
  18. scripts/
  19. security/
  20. sound/
  21. tools/
  22. usr/
  23. virt/
  24. .clang-format
  25. .cocciconfig
  26. .get_maintainer.ignore
  27. .gitattributes
  28. .gitignore
  29. .mailmap
  30. BUILD.bazel
  31. build.config.aarch64
  32. build.config.allmodconfig
  33. build.config.allmodconfig.aarch64
  34. build.config.allmodconfig.arm
  35. build.config.allmodconfig.x86_64
  36. build.config.amlogic
  37. build.config.arm
  38. build.config.common
  39. build.config.constants
  40. build.config.db845c
  41. build.config.gki
  42. build.config.gki-debug.aarch64
  43. build.config.gki-debug.x86_64
  44. build.config.gki.aarch64
  45. build.config.gki.aarch64.fips140
  46. build.config.gki.x86_64
  47. build.config.gki_kasan
  48. build.config.gki_kasan.aarch64
  49. build.config.gki_kasan.x86_64
  50. build.config.gki_kprobes
  51. build.config.gki_kprobes.aarch64
  52. build.config.gki_kprobes.x86_64
  53. build.config.hikey960
  54. build.config.khwasan
  55. build.config.rockpi4
  56. build.config.x86_64
  57. COPYING
  58. CREDITS
  59. Kbuild
  60. Kconfig
  61. MAINTAINERS
  62. Makefile
  63. OWNERS
  64. README
  65. README.md
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)